summaryrefslogtreecommitdiff
path: root/drivers/thermal
diff options
context:
space:
mode:
authordawei.chien@mediatek.com <dawei.chien@mediatek.com>2016-08-18 06:50:52 +0300
committerZhang Rui <rui.zhang@intel.com>2016-09-27 09:02:16 +0300
commitb7cf0053738c5491df532a625321e976eaa93b22 (patch)
tree616e2e25e3a4072b918679214f803adb710dfce9 /drivers/thermal
parent77d6e7212cd53dd93de6fab26d7ca89c8d591c07 (diff)
downloadlinux-b7cf0053738c5491df532a625321e976eaa93b22.tar.xz
thermal: Add Mediatek thermal driver for mt2701.
This patch adds support for mt2701 chip to mtk_thermal, and integrate both mt8173 and mt2701 on the same driver. MT8173 has four banks and five sensors, and MT2701 has only one bank and three sensors. Signed-off-by: Dawei Chien <dawei.chien@mediatek.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Diffstat (limited to 'drivers/thermal')
-rw-r--r--drivers/thermal/mtk_thermal.c215
1 files changed, 152 insertions, 63 deletions
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 262ab0a2266f..7b233c718e2e 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -2,6 +2,7 @@
* Copyright (c) 2015 MediaTek Inc.
* Author: Hanyi Wu <hanyi.wu@mediatek.com>
* Sascha Hauer <s.hauer@pengutronix.de>
+ * Dawei Chien <dawei.chien@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -21,6 +22,7 @@
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/io.h>
@@ -88,6 +90,7 @@
#define TEMP_ADCVALIDMASK_VALID_HIGH BIT(5)
#define TEMP_ADCVALIDMASK_VALID_POS(bit) (bit)
+/* MT8173 thermal sensors */
#define MT8173_TS1 0
#define MT8173_TS2 1
#define MT8173_TS3 2
@@ -106,7 +109,12 @@
/* The number of sensing points per bank */
#define MT8173_NUM_SENSORS_PER_ZONE 4
-/* Layout of the fuses providing the calibration data */
+/*
+ * Layout of the fuses providing the calibration data
+ * These macros could be used for both MT8173 and MT2701.
+ * MT8173 has five sensors and need five VTS calibration data,
+ * and MT2701 has three sensors and need three VTS calibration data.
+ */
#define MT8173_CALIB_BUF0_VALID BIT(0)
#define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff)
#define MT8173_CALIB_BUF0_VTS_TS1(x) (((x) >> 17) & 0x1ff)
@@ -117,24 +125,50 @@
#define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f)
#define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f)
+/* MT2701 thermal sensors */
+#define MT2701_TS1 0
+#define MT2701_TS2 1
+#define MT2701_TSABB 2
+
+/* AUXADC channel 11 is used for the temperature sensors */
+#define MT2701_TEMP_AUXADC_CHANNEL 11
+
+/* The total number of temperature sensors in the MT2701 */
+#define MT2701_NUM_SENSORS 3
+
#define THERMAL_NAME "mtk-thermal"
+/* The number of sensing points per bank */
+#define MT2701_NUM_SENSORS_PER_ZONE 3
+
struct mtk_thermal;
+struct thermal_bank_cfg {
+ unsigned int num_sensors;
+ const int *sensors;
+};
+
struct mtk_thermal_bank {
struct mtk_thermal *mt;
int id;
};
+struct mtk_thermal_data {
+ s32 num_banks;
+ s32 num_sensors;
+ s32 auxadc_channel;
+ const int *sensor_mux_values;
+ const int *msr;
+ const int *adcpnp;
+ struct thermal_bank_cfg bank_data[];
+};
+
struct mtk_thermal {
struct device *dev;
void __iomem *thermal_base;
struct clk *clk_peri_therm;
struct clk *clk_auxadc;
-
- struct mtk_thermal_bank banks[MT8173_NUM_ZONES];
-
/* lock: for getting and putting banks */
struct mutex lock;
@@ -144,16 +178,44 @@ struct mtk_thermal {
s32 o_slope;
s32 vts[MT8173_NUM_SENSORS];
+ const struct mtk_thermal_data *conf;
+ struct mtk_thermal_bank banks[];
};
-struct mtk_thermal_bank_cfg {
- unsigned int num_sensors;
- unsigned int sensors[MT8173_NUM_SENSORS_PER_ZONE];
+/* MT8173 thermal sensor data */
+const int mt8173_bank_data[MT8173_NUM_ZONES][3] = {
+ { MT8173_TS2, MT8173_TS3 },
+ { MT8173_TS2, MT8173_TS4 },
+ { MT8173_TS1, MT8173_TS2, MT8173_TSABB },
+ { MT8173_TS2 },
};
-static const int sensor_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
+const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = {
+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR2
+};
-/*
+const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {
+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
+};
+
+const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
+
+/* MT2701 thermal sensor data */
+const int mt2701_bank_data[MT2701_NUM_SENSORS] = {
+ MT2701_TS1, MT2701_TS2, MT2701_TSABB
+};
+
+const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = {
+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
+};
+
+const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = {
+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
+};
+
+const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 };
+
+/**
* The MT8173 thermal controller has four banks. Each bank can read up to
* four temperature sensors simultaneously. The MT8173 has a total of 5
* temperature sensors. We use each bank to measure a certain area of the
@@ -166,42 +228,53 @@ static const int sensor_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
* data, and this indeed needs the temperatures of the individual banks
* for making better decisions.
*/
-static const struct mtk_thermal_bank_cfg bank_data[] = {
- {
- .num_sensors = 2,
- .sensors = { MT8173_TS2, MT8173_TS3 },
- }, {
- .num_sensors = 2,
- .sensors = { MT8173_TS2, MT8173_TS4 },
- }, {
- .num_sensors = 3,
- .sensors = { MT8173_TS1, MT8173_TS2, MT8173_TSABB },
- }, {
- .num_sensors = 1,
- .sensors = { MT8173_TS2 },
+static const struct mtk_thermal_data mt8173_thermal_data = {
+ .auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL,
+ .num_banks = MT8173_NUM_ZONES,
+ .num_sensors = MT8173_NUM_SENSORS,
+ .bank_data = {
+ {
+ .num_sensors = 2,
+ .sensors = mt8173_bank_data[0],
+ }, {
+ .num_sensors = 2,
+ .sensors = mt8173_bank_data[1],
+ }, {
+ .num_sensors = 3,
+ .sensors = mt8173_bank_data[2],
+ }, {
+ .num_sensors = 1,
+ .sensors = mt8173_bank_data[3],
+ },
},
+ .msr = mt8173_msr,
+ .adcpnp = mt8173_adcpnp,
+ .sensor_mux_values = mt8173_mux_values,
};
-struct mtk_thermal_sense_point {
- int msr;
- int adcpnp;
-};
-
-static const struct mtk_thermal_sense_point
- sensing_points[MT8173_NUM_SENSORS_PER_ZONE] = {
- {
- .msr = TEMP_MSR0,
- .adcpnp = TEMP_ADCPNP0,
- }, {
- .msr = TEMP_MSR1,
- .adcpnp = TEMP_ADCPNP1,
- }, {
- .msr = TEMP_MSR2,
- .adcpnp = TEMP_ADCPNP2,
- }, {
- .msr = TEMP_MSR3,
- .adcpnp = TEMP_ADCPNP3,
+/**
+ * The MT2701 thermal controller has one bank, which can read up to
+ * three temperature sensors simultaneously. The MT2701 has a total of 3
+ * temperature sensors.
+ *
+ * The thermal core only gets the maximum temperature of this one bank,
+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data.
+ */
+static const struct mtk_thermal_data mt2701_thermal_data = {
+ .auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL,
+ .num_banks = 1,
+ .num_sensors = MT2701_NUM_SENSORS,
+ .bank_data = {
+ {
+ .num_sensors = 3,
+ .sensors = mt2701_bank_data,
+ },
},
+ .msr = mt2701_msr,
+ .adcpnp = mt2701_adcpnp,
+ .sensor_mux_values = mt2701_mux_values,
};
/**
@@ -270,13 +343,16 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
{
struct mtk_thermal *mt = bank->mt;
+ const struct mtk_thermal_data *conf = mt->conf;
int i, temp = INT_MIN, max = INT_MIN;
u32 raw;
- for (i = 0; i < bank_data[bank->id].num_sensors; i++) {
- raw = readl(mt->thermal_base + sensing_points[i].msr);
+ for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
+ raw = readl(mt->thermal_base + conf->msr[i]);
- temp = raw_to_mcelsius(mt, bank_data[bank->id].sensors[i], raw);
+ temp = raw_to_mcelsius(mt,
+ conf->bank_data[bank->id].sensors[i],
+ raw);
/*
* The first read of a sensor often contains very high bogus
@@ -299,7 +375,7 @@ static int mtk_read_temp(void *data, int *temperature)
int i;
int tempmax = INT_MIN;
- for (i = 0; i < MT8173_NUM_ZONES; i++) {
+ for (i = 0; i < mt->conf->num_banks; i++) {
struct mtk_thermal_bank *bank = &mt->banks[i];
mtk_thermal_get_bank(bank);
@@ -322,7 +398,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
u32 apmixed_phys_base, u32 auxadc_phys_base)
{
struct mtk_thermal_bank *bank = &mt->banks[num];
- const struct mtk_thermal_bank_cfg *cfg = &bank_data[num];
+ const struct mtk_thermal_data *conf = mt->conf;
int i;
bank->id = num;
@@ -368,7 +444,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
* this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0)
* automatically by hw
*/
- writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCMUX);
+ writel(BIT(conf->auxadc_channel), mt->thermal_base + TEMP_ADCMUX);
/* AHB address for auxadc mux selection */
writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
@@ -379,18 +455,18 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
mt->thermal_base + TEMP_PNPMUXADDR);
/* AHB value for auxadc enable */
- writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCEN);
+ writel(BIT(conf->auxadc_channel), mt->thermal_base + TEMP_ADCEN);
/* AHB address for auxadc enable (channel 0 immediate mode selected) */
writel(auxadc_phys_base + AUXADC_CON1_SET_V,
mt->thermal_base + TEMP_ADCENADDR);
/* AHB address for auxadc valid bit */
- writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL),
+ writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
mt->thermal_base + TEMP_ADCVALIDADDR);
/* AHB address for auxadc voltage output */
- writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL),
+ writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
mt->thermal_base + TEMP_ADCVOLTADDR);
/* read valid & voltage are at the same register */
@@ -407,11 +483,12 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
mt->thermal_base + TEMP_ADCWRITECTRL);
- for (i = 0; i < cfg->num_sensors; i++)
- writel(sensor_mux_values[cfg->sensors[i]],
- mt->thermal_base + sensing_points[i].adcpnp);
+ for (i = 0; i < conf->bank_data[num].num_sensors; i++)
+ writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
+ mt->thermal_base + conf->adcpnp[i]);
- writel((1 << cfg->num_sensors) - 1, mt->thermal_base + TEMP_MONCTL0);
+ writel((1 << conf->bank_data[num].num_sensors) - 1,
+ mt->thermal_base + TEMP_MONCTL0);
writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
@@ -442,7 +519,7 @@ static int mtk_thermal_get_calibration_data(struct device *dev,
/* Start with default values */
mt->adc_ge = 512;
- for (i = 0; i < MT8173_NUM_SENSORS; i++)
+ for (i = 0; i < mt->conf->num_sensors; i++)
mt->vts[i] = 260;
mt->degc_cali = 40;
mt->o_slope = 0;
@@ -486,18 +563,36 @@ out:
return ret;
}
+static const struct of_device_id mtk_thermal_of_match[] = {
+ {
+ .compatible = "mediatek,mt8173-thermal",
+ .data = (void *)&mt8173_thermal_data,
+ },
+ {
+ .compatible = "mediatek,mt2701-thermal",
+ .data = (void *)&mt2701_thermal_data,
+ }, {
+ },
+};
+MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
+
static int mtk_thermal_probe(struct platform_device *pdev)
{
int ret, i;
struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
struct mtk_thermal *mt;
struct resource *res;
+ const struct of_device_id *of_id;
u64 auxadc_phys_base, apmixed_phys_base;
mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
if (!mt)
return -ENOMEM;
+ of_id = of_match_device(mtk_thermal_of_match, &pdev->dev);
+ if (of_id)
+ mt->conf = (const struct mtk_thermal_data *)of_id->data;
+
mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
if (IS_ERR(mt->clk_peri_therm))
return PTR_ERR(mt->clk_peri_therm);
@@ -565,7 +660,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
goto err_disable_clk_auxadc;
}
- for (i = 0; i < MT8173_NUM_ZONES; i++)
+ for (i = 0; i < mt->conf->num_banks; i++)
mtk_thermal_init_bank(mt, i, apmixed_phys_base,
auxadc_phys_base);
@@ -592,13 +687,6 @@ static int mtk_thermal_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id mtk_thermal_of_match[] = {
- {
- .compatible = "mediatek,mt8173-thermal",
- }, {
- },
-};
-
static struct platform_driver mtk_thermal_driver = {
.probe = mtk_thermal_probe,
.remove = mtk_thermal_remove,
@@ -610,6 +698,7 @@ static struct platform_driver mtk_thermal_driver = {
module_platform_driver(mtk_thermal_driver);
+MODULE_AUTHOR("Dawei Chien <dawei.chien@mediatek.com>");
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
MODULE_AUTHOR("Hanyi Wu <hanyi.wu@mediatek.com>");
MODULE_DESCRIPTION("Mediatek thermal driver");