diff options
author | Zev Weiss <zev@bewilderbeest.net> | 2022-02-11 03:42:03 +0300 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-04-08 15:23:45 +0300 |
commit | d6c4fc0d903fbcc8e1190ed12bfd80f5d031c41f (patch) | |
tree | 2faac69ea050ba8990f8a7c423c1ab934b8a8e26 /drivers/tty/serial | |
parent | 011e841cd11b85d7f67997f3ed2f2abaad3b8bf7 (diff) | |
download | linux-d6c4fc0d903fbcc8e1190ed12bfd80f5d031c41f.tar.xz |
serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
[ Upstream commit a603ca60cebff8589882427a67f870ed946b3fc8 ]
Commit 54da3e381c2b ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to
set up register mapping") fixed a bug that had, as a side-effect,
prevented the 8250_aspeed_vuart driver from enabling the VUART's
FIFOs. However, fixing that (and hence enabling the FIFOs) has in
turn revealed what appears to be a hardware bug in the ASPEED VUART in
which the host-side THRE bit doesn't get if the BMC-side receive FIFO
trigger level is set to anything but one byte. This causes problems
for polled-mode writes from the host -- for example, Linux kernel
console writes proceed at a glacial pace (less than 100 bytes per
second) because the write path waits for a 10ms timeout to expire
after every character instead of being able to continue on to the next
character upon seeing THRE asserted. (GRUB behaves similarly.)
As a workaround, introduce a new port type for the ASPEED VUART that's
identical to PORT_16550A as it had previously been using, but with
UART_FCR_R_TRIG_00 instead to set the receive FIFO trigger level to
one byte, which (experimentally) seems to avoid the problematic THRE
behavior.
Fixes: 54da3e381c2b ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to set up register mapping")
Tested-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20220211004203.14915-1-zev@bewilderbeest.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r-- | drivers/tty/serial/8250/8250_aspeed_vuart.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 8 |
2 files changed, 9 insertions, 1 deletions
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index 2350fb3bb5e4..c2cecc6f47db 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -487,7 +487,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev) port.port.irq = irq_of_parse_and_map(np, 0); port.port.handle_irq = aspeed_vuart_handle_irq; port.port.iotype = UPIO_MEM; - port.port.type = PORT_16550A; + port.port.type = PORT_ASPEED_VUART; port.port.uartclk = clk; port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index ec88b706e882..b470bc747b99 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -307,6 +307,14 @@ static const struct serial8250_config uart_config[] = { .rxtrig_bytes = {1, 32, 64, 112}, .flags = UART_CAP_FIFO | UART_CAP_SLEEP, }, + [PORT_ASPEED_VUART] = { + .name = "ASPEED VUART", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ |