Merge commit '49caedb668e476c100d727f2174724e0610a2b92' of https://github.com/openbmc/linux into openbmc/dev-5.15-intel-bump_v5.15.36

Signed-off-by: Sujoy Ray <sujoy.ray@intel.com>

15 files changed, 148 insertions, 48 deletions

diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index 82a76cac94de..32366caca662 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -1417,7 +1417,9 @@ out_error:
  */
 static	int __init hvc_iucv_config(char *val)
 {
-	 return kstrtoul(val, 10, &hvc_iucv_devices);
+	if (kstrtoul(val, 10, &hvc_iucv_devices))
+		pr_warn("hvc_iucv= invalid parameter value '%s'\n", val);
+	return 1;
 }
 
 
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index da375851af4e..3b3e169c1f69 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -711,6 +711,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
 	struct mxser_port *info = container_of(port, struct mxser_port, port);
 	unsigned long page;
 	unsigned long flags;
+	int ret;
 
 	page = __get_free_page(GFP_KERNEL);
 	if (!page)
@@ -720,9 +721,9 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
 
 	if (!info->type) {
 		set_bit(TTY_IO_ERROR, &tty->flags);
-		free_page(page);
 		spin_unlock_irqrestore(&info->slock, flags);
-		return 0;
+		ret = 0;
+		goto err_free_xmit;
 	}
 	info->port.xmit_buf = (unsigned char *) page;
 
@@ -748,8 +749,10 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
 		if (capable(CAP_SYS_ADMIN)) {
 			set_bit(TTY_IO_ERROR, &tty->flags);
 			return 0;
-		} else
-			return -ENODEV;
+		}
+
+		ret = -ENODEV;
+		goto err_free_xmit;
 	}
 
 	/*
@@ -794,6 +797,10 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
 	spin_unlock_irqrestore(&info->slock, flags);
 
 	return 0;
+err_free_xmit:
+	free_page(page);
+	info->port.xmit_buf = NULL;
+	return ret;
 }
 
 /*
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 09a14f7c79f4..8643b143c408 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -435,7 +435,7 @@ static u8 gsm_encode_modem(const struct gsm_dlci *dlci)
 		modembits |= MDM_RTR;
 	if (dlci->modem_tx & TIOCM_RI)
 		modembits |= MDM_IC;
-	if (dlci->modem_tx & TIOCM_CD)
+	if (dlci->modem_tx & TIOCM_CD || dlci->gsm->initiator)
 		modembits |= MDM_DV;
 	return modembits;
 }
@@ -1009,25 +1009,25 @@ static void gsm_control_reply(struct gsm_mux *gsm, int cmd, const u8 *data,
  *	@tty: virtual tty bound to the DLCI
  *	@dlci: DLCI to affect
  *	@modem: modem bits (full EA)
- *	@clen: command length
+ *	@slen: number of signal octets
  *
  *	Used when a modem control message or line state inline in adaption
  *	layer 2 is processed. Sort out the local modem state and throttles
  */
 
 static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
-							u32 modem, int clen)
+							u32 modem, int slen)
 {
 	int  mlines = 0;
 	u8 brk = 0;
 	int fc;
 
-	/* The modem status command can either contain one octet (v.24 signals)
-	   or two octets (v.24 signals + break signals). The length field will
-	   either be 2 or 3 respectively. This is specified in section
-	   5.4.6.3.7 of the  27.010 mux spec. */
+	/* The modem status command can either contain one octet (V.24 signals)
+	 * or two octets (V.24 signals + break signals). This is specified in
+	 * section 5.4.6.3.7 of the 07.10 mux spec.
+	 */
 
-	if (clen == 2)
+	if (slen == 1)
 		modem = modem & 0x7f;
 	else {
 		brk = modem & 0x7f;
@@ -1084,6 +1084,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)
 	unsigned int brk = 0;
 	struct gsm_dlci *dlci;
 	int len = clen;
+	int slen;
 	const u8 *dp = data;
 	struct tty_struct *tty;
 
@@ -1103,6 +1104,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)
 		return;
 	dlci = gsm->dlci[addr];
 
+	slen = len;
 	while (gsm_read_ea(&modem, *dp++) == 0) {
 		len--;
 		if (len == 0)
@@ -1119,7 +1121,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)
 		modem |= (brk & 0x7f);
 	}
 	tty = tty_port_tty_get(&dlci->port);
-	gsm_process_modem(tty, dlci, modem, clen);
+	gsm_process_modem(tty, dlci, modem, slen);
 	if (tty) {
 		tty_wakeup(tty);
 		tty_kref_put(tty);
@@ -1429,6 +1431,9 @@ static void gsm_dlci_close(struct gsm_dlci *dlci)
 	if (dlci->addr != 0) {
 		tty_port_tty_hangup(&dlci->port, false);
 		kfifo_reset(&dlci->fifo);
+		/* Ensure that gsmtty_open() can return. */
+		tty_port_set_initialized(&dlci->port, 0);
+		wake_up_interruptible(&dlci->port.open_wait);
 	} else
 		dlci->gsm->dead = true;
 	wake_up(&dlci->gsm->event);
@@ -1488,7 +1493,7 @@ static void gsm_dlci_t1(struct timer_list *t)
 			dlci->mode = DLCI_MODE_ADM;
 			gsm_dlci_open(dlci);
 		} else {
-			gsm_dlci_close(dlci);
+			gsm_dlci_begin_close(dlci); /* prevent half open link */
 		}
 
 		break;
@@ -1567,6 +1572,7 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen)
 	struct tty_struct *tty;
 	unsigned int modem = 0;
 	int len = clen;
+	int slen = 0;
 
 	if (debug & 16)
 		pr_debug("%d bytes for tty\n", len);
@@ -1579,12 +1585,14 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen)
 	case 2:		/* Asynchronous serial with line state in each frame */
 		while (gsm_read_ea(&modem, *data++) == 0) {
 			len--;
+			slen++;
 			if (len == 0)
 				return;
 		}
+		slen++;
 		tty = tty_port_tty_get(port);
 		if (tty) {
-			gsm_process_modem(tty, dlci, modem, clen);
+			gsm_process_modem(tty, dlci, modem, slen);
 			tty_kref_put(tty);
 		}
 		fallthrough;
@@ -1722,7 +1730,12 @@ static void gsm_dlci_release(struct gsm_dlci *dlci)
 		gsm_destroy_network(dlci);
 		mutex_unlock(&dlci->mutex);
 
-		tty_hangup(tty);
+		/* We cannot use tty_hangup() because in tty_kref_put() the tty
+		 * driver assumes that the hangup queue is free and reuses it to
+		 * queue release_one_tty() -> NULL pointer panic in
+		 * process_one_work().
+		 */
+		tty_vhangup(tty);
 
 		tty_port_tty_set(&dlci->port, NULL);
 		tty_kref_put(tty);
@@ -3175,9 +3188,9 @@ static void gsmtty_throttle(struct tty_struct *tty)
 	if (dlci->state == DLCI_CLOSED)
 		return;
 	if (C_CRTSCTS(tty))
-		dlci->modem_tx &= ~TIOCM_DTR;
+		dlci->modem_tx &= ~TIOCM_RTS;
 	dlci->throttled = true;
-	/* Send an MSC with DTR cleared */
+	/* Send an MSC with RTS cleared */
 	gsmtty_modem_update(dlci, 0);
 }
 
@@ -3187,9 +3200,9 @@ static void gsmtty_unthrottle(struct tty_struct *tty)
 	if (dlci->state == DLCI_CLOSED)
 		return;
 	if (C_CRTSCTS(tty))
-		dlci->modem_tx |= TIOCM_DTR;
+		dlci->modem_tx |= TIOCM_RTS;
 	dlci->throttled = false;
-	/* Send an MSC with DTR set */
+	/* Send an MSC with RTS set */
 	gsmtty_modem_update(dlci, 0);
 }
 
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 451e02cd0637..de5b45de5040 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1963,7 +1963,7 @@ static bool canon_copy_from_read_buf(struct tty_struct *tty,
 		return false;
 
 	canon_head = smp_load_acquire(&ldata->canon_head);
-	n = min(*nr + 1, canon_head - ldata->read_tail);
+	n = min(*nr, canon_head - ldata->read_tail);
 
 	tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1);
 	size = min_t(size_t, tail + n, N_TTY_BUF_SIZE);
@@ -1985,10 +1985,8 @@ static bool canon_copy_from_read_buf(struct tty_struct *tty,
 		n += N_TTY_BUF_SIZE;
 	c = n + found;
 
-	if (!found || read_buf(ldata, eol) != __DISABLED_CHAR) {
-		c = min(*nr, c);
+	if (!found || read_buf(ldata, eol) != __DISABLED_CHAR)
 		n = c;
-	}
 
 	n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu tail:%zu more:%zu\n",
 		    __func__, eol, found, n, c, tail, more);
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 2350fb3bb5e4..c2cecc6f47db 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -487,7 +487,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 	port.port.irq = irq_of_parse_and_map(np, 0);
 	port.port.handle_irq = aspeed_vuart_handle_irq;
 	port.port.iotype = UPIO_MEM;
-	port.port.type = PORT_16550A;
+	port.port.type = PORT_ASPEED_VUART;
 	port.port.uartclk = clk;
 	port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
 		| UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST;
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index 890fa7ddaa7f..b3c3f7e5851a 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -64,10 +64,19 @@ int serial8250_tx_dma(struct uart_8250_port *p)
 	struct uart_8250_dma		*dma = p->dma;
 	struct circ_buf			*xmit = &p->port.state->xmit;
 	struct dma_async_tx_descriptor	*desc;
+	struct uart_port		*up = &p->port;
 	int ret;
 
-	if (dma->tx_running)
+	if (dma->tx_running) {
+		if (up->x_char) {
+			dmaengine_pause(dma->txchan);
+			uart_xchar_out(up, UART_TX);
+			dmaengine_resume(dma->txchan);
+		}
 		return 0;
+	} else if (up->x_char) {
+		uart_xchar_out(up, UART_TX);
+	}
 
 	if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) {
 		/* We have been called from __dma_tx_complete() */
diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
index 673cda3d011d..948d0a1c6ae8 100644
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -26,7 +26,7 @@ static int __init serial_init_chip(struct parisc_device *dev)
 	unsigned long address;
 	int err;
 
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && defined(CONFIG_IOSAPIC)
 	if (!dev->irq && (dev->id.sversion == 0xad))
 		dev->irq = iosapic_serial_irq(dev);
 #endif
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 848d81e3838c..49ae73f4d3a0 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -121,8 +121,7 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 {
 	struct dw_dma_slave *param = &lpss->dma_param;
 	struct pci_dev *pdev = to_pci_dev(port->dev);
-	unsigned int dma_devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
-	struct pci_dev *dma_dev = pci_get_slot(pdev->bus, dma_devfn);
+	struct pci_dev *dma_dev;
 
 	switch (pdev->device) {
 	case PCI_DEVICE_ID_INTEL_BYT_UART1:
@@ -141,6 +140,8 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 		return -EINVAL;
 	}
 
+	dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 0));
+
 	param->dma_dev = &dma_dev->dev;
 	param->m_master = 0;
 	param->p_master = 1;
@@ -156,6 +157,14 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 	return 0;
 }
 
+static void byt_serial_exit(struct lpss8250 *lpss)
+{
+	struct dw_dma_slave *param = &lpss->dma_param;
+
+	/* Paired with pci_get_slot() in the byt_serial_setup() above */
+	put_device(param->dma_dev);
+}
+
 static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 {
 	struct uart_8250_dma *dma = &lpss->data.dma;
@@ -171,6 +180,13 @@ static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 	return 0;
 }
 
+static void ehl_serial_exit(struct lpss8250 *lpss)
+{
+	struct uart_8250_port *up = serial8250_get_port(lpss->data.line);
+
+	up->dma = NULL;
+}
+
 #ifdef CONFIG_SERIAL_8250_DMA
 static const struct dw_dma_platform_data qrk_serial_dma_pdata = {
 	.nr_channels = 2,
@@ -345,8 +361,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 
 err_exit:
-	if (lpss->board->exit)
-		lpss->board->exit(lpss);
+	lpss->board->exit(lpss);
 	pci_free_irq_vectors(pdev);
 	return ret;
 }
@@ -357,8 +372,7 @@ static void lpss8250_remove(struct pci_dev *pdev)
 
 	serial8250_unregister_port(lpss->data.line);
 
-	if (lpss->board->exit)
-		lpss->board->exit(lpss);
+	lpss->board->exit(lpss);
 	pci_free_irq_vectors(pdev);
 }
 
@@ -366,12 +380,14 @@ static const struct lpss8250_board byt_board = {
 	.freq = 100000000,
 	.base_baud = 2764800,
 	.setup = byt_serial_setup,
+	.exit = byt_serial_exit,
 };
 
 static const struct lpss8250_board ehl_board = {
 	.freq = 200000000,
 	.base_baud = 12500000,
 	.setup = ehl_serial_setup,
+	.exit = ehl_serial_exit,
 };
 
 static const struct lpss8250_board qrk_board = {
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
index efa0515139f8..e6c1791609dd 100644
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -73,6 +73,11 @@ static int pnw_setup(struct mid8250 *mid, struct uart_port *p)
 	return 0;
 }
 
+static void pnw_exit(struct mid8250 *mid)
+{
+	pci_dev_put(mid->dma_dev);
+}
+
 static int tng_handle_irq(struct uart_port *p)
 {
 	struct mid8250 *mid = p->private_data;
@@ -124,6 +129,11 @@ static int tng_setup(struct mid8250 *mid, struct uart_port *p)
 	return 0;
 }
 
+static void tng_exit(struct mid8250 *mid)
+{
+	pci_dev_put(mid->dma_dev);
+}
+
 static int dnv_handle_irq(struct uart_port *p)
 {
 	struct mid8250 *mid = p->private_data;
@@ -330,9 +340,9 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	pci_set_drvdata(pdev, mid);
 	return 0;
+
 err:
-	if (mid->board->exit)
-		mid->board->exit(mid);
+	mid->board->exit(mid);
 	return ret;
 }
 
@@ -342,8 +352,7 @@ static void mid8250_remove(struct pci_dev *pdev)
 
 	serial8250_unregister_port(mid->line);
 
-	if (mid->board->exit)
-		mid->board->exit(mid);
+	mid->board->exit(mid);
 }
 
 static const struct mid8250_board pnw_board = {
@@ -351,6 +360,7 @@ static const struct mid8250_board pnw_board = {
 	.freq = 50000000,
 	.base_baud = 115200,
 	.setup = pnw_setup,
+	.exit = pnw_exit,
 };
 
 static const struct mid8250_board tng_board = {
@@ -358,6 +368,7 @@ static const struct mid8250_board tng_board = {
 	.freq = 38400000,
 	.base_baud = 1843200,
 	.setup = tng_setup,
+	.exit = tng_exit,
 };
 
 static const struct mid8250_board dnv_board = {
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index ec88b706e882..723ec0806799 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -307,6 +307,14 @@ static const struct serial8250_config uart_config[] = {
 		.rxtrig_bytes	= {1, 32, 64, 112},
 		.flags		= UART_CAP_FIFO | UART_CAP_SLEEP,
 	},
+	[PORT_ASPEED_VUART] = {
+		.name		= "ASPEED VUART",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+		.rxtrig_bytes	= {1, 4, 8, 14},
+		.flags		= UART_CAP_FIFO,
+	},
 };
 
 /* Uart divisor latch read */
@@ -1615,6 +1623,18 @@ static inline void start_tx_rs485(struct uart_port *port)
 	struct uart_8250_port *up = up_to_u8250p(port);
 	struct uart_8250_em485 *em485 = up->em485;
 
+	/*
+	 * While serial8250_em485_handle_stop_tx() is a noop if
+	 * em485->active_timer != &em485->stop_tx_timer, it might happen that
+	 * the timer is still armed and triggers only after the current bunch of
+	 * chars is send and em485->active_timer == &em485->stop_tx_timer again.
+	 * So cancel the timer. There is still a theoretical race condition if
+	 * the timer is already running and only comes around to check for
+	 * em485->active_timer when &em485->stop_tx_timer is armed again.
+	 */
+	if (em485->active_timer == &em485->stop_tx_timer)
+		hrtimer_try_to_cancel(&em485->stop_tx_timer);
+
 	em485->active_timer = NULL;
 
 	if (em485->tx_stopped) {
@@ -1799,9 +1819,7 @@ void serial8250_tx_chars(struct uart_8250_port *up)
 	int count;
 
 	if (port->x_char) {
-		serial_out(up, UART_TX, port->x_char);
-		port->icount.tx++;
-		port->x_char = 0;
+		uart_xchar_out(port, UART_TX);
 		return;
 	}
 	if (uart_tx_stopped(port)) {
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 49d0c7f2b29b..79b7db8580e0 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -403,16 +403,16 @@ static int kgdboc_option_setup(char *opt)
 {
 	if (!opt) {
 		pr_err("config string not provided\n");
-		return -EINVAL;
+		return 1;
 	}
 
 	if (strlen(opt) >= MAX_CONFIG_LEN) {
 		pr_err("config string too long\n");
-		return -ENOSPC;
+		return 1;
 	}
 	strcpy(config, opt);
 
-	return 0;
+	return 1;
 }
 
 __setup("kgdboc=", kgdboc_option_setup);
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index e2f49863e9c2..319533b3c32a 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -922,11 +922,8 @@ static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport)
 		return;
 	}
 
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
-		spin_unlock(&port->lock);
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
-		spin_lock(&port->lock);
-	}
 
 	if (uart_circ_empty(xmit))
 		s3c24xx_serial_stop_tx(port);
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index acbb615dd28f..0ab788058fa2 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -734,12 +734,15 @@ static irqreturn_t sc16is7xx_irq(int irq, void *dev_id)
 static void sc16is7xx_tx_proc(struct kthread_work *ws)
 {
 	struct uart_port *port = &(to_sc16is7xx_one(ws, tx_work)->port);
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
 
 	if ((port->rs485.flags & SER_RS485_ENABLED) &&
 	    (port->rs485.delay_rts_before_send > 0))
 		msleep(port->rs485.delay_rts_before_send);
 
+	mutex_lock(&s->efr_lock);
 	sc16is7xx_handle_tx(port);
+	mutex_unlock(&s->efr_lock);
 }
 
 static void sc16is7xx_reconf_rs485(struct uart_port *port)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index dc6129ddef85..eb15423f935a 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -653,6 +653,20 @@ static void uart_flush_buffer(struct tty_struct *tty)
 }
 
 /*
+ * This function performs low-level write of high-priority XON/XOFF
+ * character and accounting for it.
+ *
+ * Requires uart_port to implement .serial_out().
+ */
+void uart_xchar_out(struct uart_port *uport, int offset)
+{
+	serial_port_out(uport, offset, uport->x_char);
+	uport->icount.tx++;
+	uport->x_char = 0;
+}
+EXPORT_SYMBOL_GPL(uart_xchar_out);
+
+/*
  * This function is used to send a high-priority XON/XOFF character to
  * the device
  */
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 200cd293d14d..810a1b0b6520 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -421,10 +421,22 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
 	struct stm32_port *stm32_port = to_stm32_port(port);
 	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
 	struct circ_buf *xmit = &port->state->xmit;
+	u32 isr;
+	int ret;
 
 	if (port->x_char) {
 		if (stm32_port->tx_dma_busy)
 			stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+
+		/* Check that TDR is empty before filling FIFO */
+		ret =
+		readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+						  isr,
+						  (isr & USART_SR_TXE),
+						  10, 1000);
+		if (ret)
+			dev_warn(port->dev, "1 character may be erased\n");
+
 		writel_relaxed(port->x_char, port->membase + ofs->tdr);
 		port->x_char = 0;
 		port->icount.tx++;