summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-05-07 09:37:55 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2021-05-07 09:37:55 +0300
commitaef511fb91b6efb2d355c2704cf979f3202d310a (patch)
treed94df6d5c0c297ade8a45594602006b04e95ad59 /drivers
parente48661230cc35b3d0f4367eddfc19f86463ab917 (diff)
parent05665cef4b745cb46b1d1b8e96deaa25464092d3 (diff)
downloadlinux-aef511fb91b6efb2d355c2704cf979f3202d310a.tar.xz
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - three new touchscreen drivers: Hycon HY46XX, ILITEK Lego Series, and MStar MSG2638 - a new driver for Azoteq IQS626A proximity and touch controller - addition of Amazon Game Controller to the list of devices handled by the xpad driver - Elan touchscreen driver will avoid binding to devices described as I2CHID compatible in ACPI tables - various driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (56 commits) Input: xpad - add support for Amazon Game Controller Input: ili210x - add missing negation for touch indication on ili210x MAINTAINERS: repair reference in HYCON HY46XX TOUCHSCREEN SUPPORT Input: add driver for the Hycon HY46XX touchpanel series dt-bindings: touchscreen: Add HY46XX bindings dt-bindings: Add Hycon Technology vendor prefix Input: cyttsp - flag the device properly Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJOR Input: cyttsp - drop the phys path Input: cyttsp - reduce reset pulse timings Input: cyttsp - error message on boot mode exit error Input: apbps2 - remove useless variable Input: mms114 - support MMS136 Input: mms114 - convert bindings to YAML and extend Input: Add support for ILITEK Lego Series dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings Input: add MStar MSG2638 touchscreen driver dt-bindings: input/touchscreen: add bindings for msg2638 Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/input/Makefile1
-rw-r--r--drivers/input/joystick/xpad.c2
-rw-r--r--drivers/input/keyboard/gpio_keys.c105
-rw-r--r--drivers/input/keyboard/imx_keypad.c13
-rw-r--r--drivers/input/keyboard/tca6416-keypad.c3
-rw-r--r--drivers/input/keyboard/tegra-kbc.c5
-rw-r--r--drivers/input/misc/Kconfig11
-rw-r--r--drivers/input/misc/Makefile1
-rw-r--r--drivers/input/misc/ims-pcu.c1
-rw-r--r--drivers/input/misc/iqs626a.c1838
-rw-r--r--drivers/input/misc/max8997_haptic.c9
-rw-r--r--drivers/input/mouse/elan_i2c.h7
-rw-r--r--drivers/input/mouse/elan_i2c_core.c58
-rw-r--r--drivers/input/serio/apbps2.c3
-rw-r--r--drivers/input/touchscreen.c (renamed from drivers/input/touchscreen/of_touchscreen.c)13
-rw-r--r--drivers/input/touchscreen/Kconfig39
-rw-r--r--drivers/input/touchscreen/Makefile4
-rw-r--r--drivers/input/touchscreen/ar1021_i2c.c5
-rw-r--r--drivers/input/touchscreen/atmel_mxt_ts.c83
-rw-r--r--drivers/input/touchscreen/bu21029_ts.c4
-rw-r--r--drivers/input/touchscreen/cyttsp_core.c39
-rw-r--r--drivers/input/touchscreen/cyttsp_core.h1
-rw-r--r--drivers/input/touchscreen/elants_i2c.c44
-rw-r--r--drivers/input/touchscreen/exc3000.c253
-rw-r--r--drivers/input/touchscreen/hycon-hy46xx.c591
-rw-r--r--drivers/input/touchscreen/ili210x.c2
-rw-r--r--drivers/input/touchscreen/ilitek_ts_i2c.c690
-rw-r--r--drivers/input/touchscreen/iqs5xx.c171
-rw-r--r--drivers/input/touchscreen/lpc32xx_ts.c10
-rw-r--r--drivers/input/touchscreen/melfas_mip4.c5
-rw-r--r--drivers/input/touchscreen/mms114.c26
-rw-r--r--drivers/input/touchscreen/msg2638.c337
-rw-r--r--drivers/input/touchscreen/silead.c46
-rw-r--r--drivers/input/touchscreen/stmfts.c3
-rw-r--r--drivers/input/touchscreen/tsc2007.h4
-rw-r--r--drivers/input/touchscreen/tsc2007_core.c60
-rw-r--r--drivers/input/touchscreen/wacom_i2c.c56
-rw-r--r--drivers/input/touchscreen/wm831x-ts.c3
-rw-r--r--drivers/input/touchscreen/zinitix.c4
39 files changed, 4137 insertions, 413 deletions
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index d8f5310e22ba..037cc595106c 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_INPUT) += input-core.o
input-core-y := input.o input-compat.o input-mt.o input-poller.o ff-core.o
+input-core-y += touchscreen.o
obj-$(CONFIG_INPUT_FF_MEMLESS) += ff-memless.o
obj-$(CONFIG_INPUT_SPARSEKMAP) += sparse-keymap.o
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 9f0d07dcbf06..d69d7657ab12 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -268,6 +268,7 @@ static const struct xpad_device {
{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
@@ -440,6 +441,7 @@ static const struct usb_device_id xpad_table[] = {
XPAD_XBOX360_VENDOR(0x15e4), /* Numark X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x162e), /* Joytech X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
+ XPAD_XBOX360_VENDOR(0x1949), /* Amazon controllers */
XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
XPAD_XBOX360_VENDOR(0x20d6), /* PowerA Controllers */
XPAD_XBOXONE_VENDOR(0x20d6), /* PowerA Controllers */
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 77bac4ddf324..8dbf1e69c90a 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -8,6 +8,7 @@
#include <linux/module.h>
+#include <linux/hrtimer.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
@@ -36,10 +37,11 @@ struct gpio_button_data {
unsigned short *code;
- struct timer_list release_timer;
+ struct hrtimer release_timer;
unsigned int release_delay; /* in msecs, for IRQ-only buttons */
struct delayed_work work;
+ struct hrtimer debounce_timer;
unsigned int software_debounce; /* in msecs, for GPIO-driven buttons */
unsigned int irq;
@@ -48,6 +50,7 @@ struct gpio_button_data {
bool disabled;
bool key_pressed;
bool suspended;
+ bool debounce_use_hrtimer;
};
struct gpio_keys_drvdata {
@@ -122,6 +125,18 @@ static const unsigned long *get_bm_events_by_type(struct input_dev *dev,
return (type == EV_KEY) ? dev->keybit : dev->swbit;
}
+static void gpio_keys_quiesce_key(void *data)
+{
+ struct gpio_button_data *bdata = data;
+
+ if (!bdata->gpiod)
+ hrtimer_cancel(&bdata->release_timer);
+ if (bdata->debounce_use_hrtimer)
+ hrtimer_cancel(&bdata->debounce_timer);
+ else
+ cancel_delayed_work_sync(&bdata->work);
+}
+
/**
* gpio_keys_disable_button() - disables given GPIO button
* @bdata: button data for button to be disabled
@@ -142,12 +157,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata)
* Disable IRQ and associated timer/work structure.
*/
disable_irq(bdata->irq);
-
- if (bdata->gpiod)
- cancel_delayed_work_sync(&bdata->work);
- else
- del_timer_sync(&bdata->release_timer);
-
+ gpio_keys_quiesce_key(bdata);
bdata->disabled = true;
}
}
@@ -360,7 +370,9 @@ static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata)
unsigned int type = button->type ?: EV_KEY;
int state;
- state = gpiod_get_value_cansleep(bdata->gpiod);
+ state = bdata->debounce_use_hrtimer ?
+ gpiod_get_value(bdata->gpiod) :
+ gpiod_get_value_cansleep(bdata->gpiod);
if (state < 0) {
dev_err(input->dev.parent,
"failed to get gpio state: %d\n", state);
@@ -373,7 +385,15 @@ static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata)
} else {
input_event(input, type, *bdata->code, state);
}
- input_sync(input);
+}
+
+static void gpio_keys_debounce_event(struct gpio_button_data *bdata)
+{
+ gpio_keys_gpio_report_event(bdata);
+ input_sync(bdata->input);
+
+ if (bdata->button->wakeup)
+ pm_relax(bdata->input->dev.parent);
}
static void gpio_keys_gpio_work_func(struct work_struct *work)
@@ -381,10 +401,17 @@ static void gpio_keys_gpio_work_func(struct work_struct *work)
struct gpio_button_data *bdata =
container_of(work, struct gpio_button_data, work.work);
- gpio_keys_gpio_report_event(bdata);
+ gpio_keys_debounce_event(bdata);
+}
- if (bdata->button->wakeup)
- pm_relax(bdata->input->dev.parent);
+static enum hrtimer_restart gpio_keys_debounce_timer(struct hrtimer *t)
+{
+ struct gpio_button_data *bdata =
+ container_of(t, struct gpio_button_data, debounce_timer);
+
+ gpio_keys_debounce_event(bdata);
+
+ return HRTIMER_NORESTART;
}
static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
@@ -408,26 +435,33 @@ static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
}
}
- mod_delayed_work(system_wq,
- &bdata->work,
- msecs_to_jiffies(bdata->software_debounce));
+ if (bdata->debounce_use_hrtimer) {
+ hrtimer_start(&bdata->debounce_timer,
+ ms_to_ktime(bdata->software_debounce),
+ HRTIMER_MODE_REL);
+ } else {
+ mod_delayed_work(system_wq,
+ &bdata->work,
+ msecs_to_jiffies(bdata->software_debounce));
+ }
return IRQ_HANDLED;
}
-static void gpio_keys_irq_timer(struct timer_list *t)
+static enum hrtimer_restart gpio_keys_irq_timer(struct hrtimer *t)
{
- struct gpio_button_data *bdata = from_timer(bdata, t, release_timer);
+ struct gpio_button_data *bdata = container_of(t,
+ struct gpio_button_data,
+ release_timer);
struct input_dev *input = bdata->input;
- unsigned long flags;
- spin_lock_irqsave(&bdata->lock, flags);
if (bdata->key_pressed) {
input_event(input, EV_KEY, *bdata->code, 0);
input_sync(input);
bdata->key_pressed = false;
}
- spin_unlock_irqrestore(&bdata->lock, flags);
+
+ return HRTIMER_NORESTART;
}
static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
@@ -457,23 +491,14 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
}
if (bdata->release_delay)
- mod_timer(&bdata->release_timer,
- jiffies + msecs_to_jiffies(bdata->release_delay));
+ hrtimer_start(&bdata->release_timer,
+ ms_to_ktime(bdata->release_delay),
+ HRTIMER_MODE_REL_HARD);
out:
spin_unlock_irqrestore(&bdata->lock, flags);
return IRQ_HANDLED;
}
-static void gpio_keys_quiesce_key(void *data)
-{
- struct gpio_button_data *bdata = data;
-
- if (bdata->gpiod)
- cancel_delayed_work_sync(&bdata->work);
- else
- del_timer_sync(&bdata->release_timer);
-}
-
static int gpio_keys_setup_key(struct platform_device *pdev,
struct input_dev *input,
struct gpio_keys_drvdata *ddata,
@@ -543,6 +568,14 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
if (error < 0)
bdata->software_debounce =
button->debounce_interval;
+
+ /*
+ * If reading the GPIO won't sleep, we can use a
+ * hrtimer instead of a standard timer for the software
+ * debounce, to reduce the latency as much as possible.
+ */
+ bdata->debounce_use_hrtimer =
+ !gpiod_cansleep(bdata->gpiod);
}
if (button->irq) {
@@ -561,6 +594,10 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);
+ hrtimer_init(&bdata->debounce_timer,
+ CLOCK_REALTIME, HRTIMER_MODE_REL);
+ bdata->debounce_timer.function = gpio_keys_debounce_timer;
+
isr = gpio_keys_gpio_isr;
irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
@@ -595,7 +632,9 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
}
bdata->release_delay = button->debounce_interval;
- timer_setup(&bdata->release_timer, gpio_keys_irq_timer, 0);
+ hrtimer_init(&bdata->release_timer,
+ CLOCK_REALTIME, HRTIMER_MODE_REL_HARD);
+ bdata->release_timer.function = gpio_keys_irq_timer;
isr = gpio_keys_irq_isr;
irqflags = 0;
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index 1f5c9ea5e9e5..ae9303848571 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -408,27 +408,18 @@ open_err:
return -EIO;
}
-#ifdef CONFIG_OF
static const struct of_device_id imx_keypad_of_match[] = {
{ .compatible = "fsl,imx21-kpp", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx_keypad_of_match);
-#endif
static int imx_keypad_probe(struct platform_device *pdev)
{
- const struct matrix_keymap_data *keymap_data =
- dev_get_platdata(&pdev->dev);
struct imx_keypad *keypad;
struct input_dev *input_dev;
int irq, error, i, row, col;
- if (!keymap_data && !pdev->dev.of_node) {
- dev_err(&pdev->dev, "no keymap defined\n");
- return -EINVAL;
- }
-
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
@@ -469,7 +460,7 @@ static int imx_keypad_probe(struct platform_device *pdev)
input_dev->open = imx_keypad_open;
input_dev->close = imx_keypad_close;
- error = matrix_keypad_build_keymap(keymap_data, NULL,
+ error = matrix_keypad_build_keymap(NULL, NULL,
MAX_MATRIX_KEY_ROWS,
MAX_MATRIX_KEY_COLS,
keypad->keycodes, input_dev);
@@ -582,7 +573,7 @@ static struct platform_driver imx_keypad_driver = {
.driver = {
.name = "imx-keypad",
.pm = &imx_kbd_pm_ops,
- .of_match_table = of_match_ptr(imx_keypad_of_match),
+ .of_match_table = imx_keypad_of_match,
},
.probe = imx_keypad_probe,
};
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 9b0f9665dcb0..2a9755910065 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -274,7 +274,7 @@ static int tca6416_keypad_probe(struct i2c_client *client,
error = request_threaded_irq(chip->irqnum, NULL,
tca6416_keys_isr,
IRQF_TRIGGER_FALLING |
- IRQF_ONESHOT,
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
"tca6416-keypad", chip);
if (error) {
dev_dbg(&client->dev,
@@ -282,7 +282,6 @@ static int tca6416_keypad_probe(struct i2c_client *client,
chip->irqnum, error);
goto fail1;
}
- disable_irq(chip->irqnum);
}
error = input_register_device(input);
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index 9671842a082a..570fe18c0ce9 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -694,14 +694,13 @@ static int tegra_kbc_probe(struct platform_device *pdev)
input_set_drvdata(kbc->idev, kbc);
err = devm_request_irq(&pdev->dev, kbc->irq, tegra_kbc_isr,
- IRQF_TRIGGER_HIGH, pdev->name, kbc);
+ IRQF_TRIGGER_HIGH | IRQF_NO_AUTOEN,
+ pdev->name, kbc);
if (err) {
dev_err(&pdev->dev, "failed to request keyboard IRQ\n");
return err;
}
- disable_irq(kbc->irq);
-
err = input_register_device(kbc->idev);
if (err) {
dev_err(&pdev->dev, "failed to register input device\n");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7237dc440b98..498cde376981 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -763,6 +763,17 @@ config INPUT_IQS269A
To compile this driver as a module, choose M here: the
module will be called iqs269a.
+config INPUT_IQS626A
+ tristate "Azoteq IQS626A capacitive touch controller"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the Azoteq IQS626A capacitive
+ touch controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called iqs626a.
+
config INPUT_CMA3000
tristate "VTI CMA3000 Tri-axis accelerometer"
help
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 46db664a8bc4..f593beed7e05 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o
+obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c
index 08b9b5cdb943..81de8c4e37d0 100644
--- a/drivers/input/misc/ims-pcu.c
+++ b/drivers/input/misc/ims-pcu.c
@@ -2018,7 +2018,6 @@ static int ims_pcu_probe(struct usb_interface *intf,
}
usb_set_intfdata(pcu->ctrl_intf, pcu);
- usb_set_intfdata(pcu->data_intf, pcu);
error = ims_pcu_buffers_alloc(pcu);
if (error)
diff --git a/drivers/input/misc/iqs626a.c b/drivers/input/misc/iqs626a.c
new file mode 100644
index 000000000000..d57e996732cf
--- /dev/null
+++ b/drivers/input/misc/iqs626a.c
@@ -0,0 +1,1838 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS626A Capacitive Touch Controller
+ *
+ * Copyright (C) 2020 Jeff LaBundy <jeff@labundy.com>
+ *
+ * This driver registers up to 2 input devices: one representing capacitive or
+ * inductive keys as well as Hall-effect switches, and one for a trackpad that
+ * can express various gestures.
+ */
+
+#include <linux/bits.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define IQS626_VER_INFO 0x00
+#define IQS626_VER_INFO_PROD_NUM 0x51
+
+#define IQS626_SYS_FLAGS 0x02
+#define IQS626_SYS_FLAGS_SHOW_RESET BIT(15)
+#define IQS626_SYS_FLAGS_IN_ATI BIT(12)
+#define IQS626_SYS_FLAGS_PWR_MODE_MASK GENMASK(9, 8)
+#define IQS626_SYS_FLAGS_PWR_MODE_SHIFT 8
+
+#define IQS626_HALL_OUTPUT 0x23
+
+#define IQS626_SYS_SETTINGS 0x80
+#define IQS626_SYS_SETTINGS_CLK_DIV BIT(15)
+#define IQS626_SYS_SETTINGS_ULP_AUTO BIT(14)
+#define IQS626_SYS_SETTINGS_DIS_AUTO BIT(13)
+#define IQS626_SYS_SETTINGS_PWR_MODE_MASK GENMASK(12, 11)
+#define IQS626_SYS_SETTINGS_PWR_MODE_SHIFT 11
+#define IQS626_SYS_SETTINGS_PWR_MODE_MAX 3
+#define IQS626_SYS_SETTINGS_ULP_UPDATE_MASK GENMASK(10, 8)
+#define IQS626_SYS_SETTINGS_ULP_UPDATE_SHIFT 8
+#define IQS626_SYS_SETTINGS_ULP_UPDATE_MAX 7
+#define IQS626_SYS_SETTINGS_EVENT_MODE BIT(5)
+#define IQS626_SYS_SETTINGS_EVENT_MODE_LP BIT(4)
+#define IQS626_SYS_SETTINGS_REDO_ATI BIT(2)
+#define IQS626_SYS_SETTINGS_ACK_RESET BIT(0)
+
+#define IQS626_MISC_A_ATI_BAND_DISABLE BIT(7)
+#define IQS626_MISC_A_TPx_LTA_UPDATE_MASK GENMASK(6, 4)
+#define IQS626_MISC_A_TPx_LTA_UPDATE_SHIFT 4
+#define IQS626_MISC_A_TPx_LTA_UPDATE_MAX 7
+#define IQS626_MISC_A_ATI_LP_ONLY BIT(3)
+#define IQS626_MISC_A_GPIO3_SELECT_MASK GENMASK(2, 0)
+#define IQS626_MISC_A_GPIO3_SELECT_MAX 7
+
+#define IQS626_EVENT_MASK_SYS BIT(6)
+#define IQS626_EVENT_MASK_GESTURE BIT(3)
+#define IQS626_EVENT_MASK_DEEP BIT(2)
+#define IQS626_EVENT_MASK_TOUCH BIT(1)
+#define IQS626_EVENT_MASK_PROX BIT(0)
+
+#define IQS626_RATE_NP_MS_MAX 255
+#define IQS626_RATE_LP_MS_MAX 255
+#define IQS626_RATE_ULP_MS_MAX 4080
+#define IQS626_TIMEOUT_PWR_MS_MAX 130560
+#define IQS626_TIMEOUT_LTA_MS_MAX 130560
+
+#define IQS626_MISC_B_RESEED_UI_SEL_MASK GENMASK(7, 6)
+#define IQS626_MISC_B_RESEED_UI_SEL_SHIFT 6
+#define IQS626_MISC_B_RESEED_UI_SEL_MAX 3
+#define IQS626_MISC_B_THRESH_EXTEND BIT(5)
+#define IQS626_MISC_B_TRACKING_UI_ENABLE BIT(4)
+#define IQS626_MISC_B_TPx_SWIPE BIT(3)
+#define IQS626_MISC_B_RESEED_OFFSET BIT(2)
+#define IQS626_MISC_B_FILT_STR_TPx GENMASK(1, 0)
+
+#define IQS626_THRESH_SWIPE_MAX 255
+#define IQS626_TIMEOUT_TAP_MS_MAX 4080
+#define IQS626_TIMEOUT_SWIPE_MS_MAX 4080
+
+#define IQS626_CHx_ENG_0_MEAS_CAP_SIZE BIT(7)
+#define IQS626_CHx_ENG_0_RX_TERM_VSS BIT(5)
+#define IQS626_CHx_ENG_0_LINEARIZE BIT(4)
+#define IQS626_CHx_ENG_0_DUAL_DIR BIT(3)
+#define IQS626_CHx_ENG_0_FILT_DISABLE BIT(2)
+#define IQS626_CHx_ENG_0_ATI_MODE_MASK GENMASK(1, 0)
+#define IQS626_CHx_ENG_0_ATI_MODE_MAX 3
+
+#define IQS626_CHx_ENG_1_CCT_HIGH_1 BIT(7)
+#define IQS626_CHx_ENG_1_CCT_HIGH_0 BIT(6)
+#define IQS626_CHx_ENG_1_PROJ_BIAS_MASK GENMASK(5, 4)
+#define IQS626_CHx_ENG_1_PROJ_BIAS_SHIFT 4
+#define IQS626_CHx_ENG_1_PROJ_BIAS_MAX 3
+#define IQS626_CHx_ENG_1_CCT_ENABLE BIT(3)
+#define IQS626_CHx_ENG_1_SENSE_FREQ_MASK GENMASK(2, 1)
+#define IQS626_CHx_ENG_1_SENSE_FREQ_SHIFT 1
+#define IQS626_CHx_ENG_1_SENSE_FREQ_MAX 3
+#define IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN BIT(0)
+
+#define IQS626_CHx_ENG_2_LOCAL_CAP_MASK GENMASK(7, 6)
+#define IQS626_CHx_ENG_2_LOCAL_CAP_SHIFT 6
+#define IQS626_CHx_ENG_2_LOCAL_CAP_MAX 3
+#define IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE BIT(5)
+#define IQS626_CHx_ENG_2_SENSE_MODE_MASK GENMASK(3, 0)
+#define IQS626_CHx_ENG_2_SENSE_MODE_MAX 15
+
+#define IQS626_CHx_ENG_3_TX_FREQ_MASK GENMASK(5, 4)
+#define IQS626_CHx_ENG_3_TX_FREQ_SHIFT 4
+#define IQS626_CHx_ENG_3_TX_FREQ_MAX 3
+#define IQS626_CHx_ENG_3_INV_LOGIC BIT(0)
+
+#define IQS626_CHx_ENG_4_RX_TERM_VREG BIT(6)
+#define IQS626_CHx_ENG_4_CCT_LOW_1 BIT(5)
+#define IQS626_CHx_ENG_4_CCT_LOW_0 BIT(4)
+#define IQS626_CHx_ENG_4_COMP_DISABLE BIT(1)
+#define IQS626_CHx_ENG_4_STATIC_ENABLE BIT(0)
+
+#define IQS626_TPx_ATI_BASE_MIN 45
+#define IQS626_TPx_ATI_BASE_MAX 300
+#define IQS626_CHx_ATI_BASE_MASK GENMASK(7, 6)
+#define IQS626_CHx_ATI_BASE_75 0x00
+#define IQS626_CHx_ATI_BASE_100 0x40
+#define IQS626_CHx_ATI_BASE_150 0x80
+#define IQS626_CHx_ATI_BASE_200 0xC0
+#define IQS626_CHx_ATI_TARGET_MASK GENMASK(5, 0)
+#define IQS626_CHx_ATI_TARGET_MAX 2016
+
+#define IQS626_CHx_THRESH_MAX 255
+#define IQS626_CHx_HYST_DEEP_MASK GENMASK(7, 4)
+#define IQS626_CHx_HYST_DEEP_SHIFT 4
+#define IQS626_CHx_HYST_TOUCH_MASK GENMASK(3, 0)
+#define IQS626_CHx_HYST_MAX 15
+
+#define IQS626_FILT_STR_NP_TPx_MASK GENMASK(7, 6)
+#define IQS626_FILT_STR_NP_TPx_SHIFT 6
+#define IQS626_FILT_STR_LP_TPx_MASK GENMASK(5, 4)
+#define IQS626_FILT_STR_LP_TPx_SHIFT 4
+
+#define IQS626_FILT_STR_NP_CNT_MASK GENMASK(7, 6)
+#define IQS626_FILT_STR_NP_CNT_SHIFT 6
+#define IQS626_FILT_STR_LP_CNT_MASK GENMASK(5, 4)
+#define IQS626_FILT_STR_LP_CNT_SHIFT 4
+#define IQS626_FILT_STR_NP_LTA_MASK GENMASK(3, 2)
+#define IQS626_FILT_STR_NP_LTA_SHIFT 2
+#define IQS626_FILT_STR_LP_LTA_MASK GENMASK(1, 0)
+#define IQS626_FILT_STR_MAX 3
+
+#define IQS626_ULP_PROJ_ENABLE BIT(4)
+#define IQS626_GEN_WEIGHT_MAX 255
+
+#define IQS626_MAX_REG 0xFF
+
+#define IQS626_NUM_CH_TP_3 9
+#define IQS626_NUM_CH_TP_2 6
+#define IQS626_NUM_CH_GEN 3
+#define IQS626_NUM_CRx_TX 8
+
+#define IQS626_PWR_MODE_POLL_SLEEP_US 50000
+#define IQS626_PWR_MODE_POLL_TIMEOUT_US 500000
+
+#define iqs626_irq_wait() usleep_range(350, 400)
+
+enum iqs626_ch_id {
+ IQS626_CH_ULP_0,
+ IQS626_CH_TP_2,
+ IQS626_CH_TP_3,
+ IQS626_CH_GEN_0,
+ IQS626_CH_GEN_1,
+ IQS626_CH_GEN_2,
+ IQS626_CH_HALL,
+};
+
+enum iqs626_rx_inactive {
+ IQS626_RX_INACTIVE_VSS,
+ IQS626_RX_INACTIVE_FLOAT,
+ IQS626_RX_INACTIVE_VREG,
+};
+
+enum iqs626_st_offs {
+ IQS626_ST_OFFS_PROX,
+ IQS626_ST_OFFS_DIR,
+ IQS626_ST_OFFS_TOUCH,
+ IQS626_ST_OFFS_DEEP,
+};
+
+enum iqs626_th_offs {
+ IQS626_TH_OFFS_PROX,
+ IQS626_TH_OFFS_TOUCH,
+ IQS626_TH_OFFS_DEEP,
+};
+
+enum iqs626_event_id {
+ IQS626_EVENT_PROX_DN,
+ IQS626_EVENT_PROX_UP,
+ IQS626_EVENT_TOUCH_DN,
+ IQS626_EVENT_TOUCH_UP,
+ IQS626_EVENT_DEEP_DN,
+ IQS626_EVENT_DEEP_UP,
+};
+
+enum iqs626_gesture_id {
+ IQS626_GESTURE_FLICK_X_POS,
+ IQS626_GESTURE_FLICK_X_NEG,
+ IQS626_GESTURE_FLICK_Y_POS,
+ IQS626_GESTURE_FLICK_Y_NEG,
+ IQS626_GESTURE_TAP,
+ IQS626_GESTURE_HOLD,
+ IQS626_NUM_GESTURES,
+};
+
+struct iqs626_event_desc {
+ const char *name;
+ enum iqs626_st_offs st_offs;
+ enum iqs626_th_offs th_offs;
+ bool dir_up;
+ u8 mask;
+};
+
+static const struct iqs626_event_desc iqs626_events[] = {
+ [IQS626_EVENT_PROX_DN] = {
+ .name = "event-prox",
+ .st_offs = IQS626_ST_OFFS_PROX,
+ .th_offs = IQS626_TH_OFFS_PROX,
+ .mask = IQS626_EVENT_MASK_PROX,
+ },
+ [IQS626_EVENT_PROX_UP] = {
+ .name = "event-prox-alt",
+ .st_offs = IQS626_ST_OFFS_PROX,
+ .th_offs = IQS626_TH_OFFS_PROX,
+ .dir_up = true,
+ .mask = IQS626_EVENT_MASK_PROX,
+ },
+ [IQS626_EVENT_TOUCH_DN] = {
+ .name = "event-touch",
+ .st_offs = IQS626_ST_OFFS_TOUCH,
+ .th_offs = IQS626_TH_OFFS_TOUCH,
+ .mask = IQS626_EVENT_MASK_TOUCH,
+ },
+ [IQS626_EVENT_TOUCH_UP] = {
+ .name = "event-touch-alt",
+ .st_offs = IQS626_ST_OFFS_TOUCH,
+ .th_offs = IQS626_TH_OFFS_TOUCH,
+ .dir_up = true,
+ .mask = IQS626_EVENT_MASK_TOUCH,
+ },
+ [IQS626_EVENT_DEEP_DN] = {
+ .name = "event-deep",
+ .st_offs = IQS626_ST_OFFS_DEEP,
+ .th_offs = IQS626_TH_OFFS_DEEP,
+ .mask = IQS626_EVENT_MASK_DEEP,
+ },
+ [IQS626_EVENT_DEEP_UP] = {
+ .name = "event-deep-alt",
+ .st_offs = IQS626_ST_OFFS_DEEP,
+ .th_offs = IQS626_TH_OFFS_DEEP,
+ .dir_up = true,
+ .mask = IQS626_EVENT_MASK_DEEP,
+ },
+};
+
+struct iqs626_ver_info {
+ u8 prod_num;
+ u8 sw_num;
+ u8 hw_num;
+ u8 padding;
+} __packed;
+
+struct iqs626_flags {
+ __be16 system;
+ u8 gesture;
+ u8 padding_a;
+ u8 states[4];
+ u8 ref_active;
+ u8 padding_b;
+ u8 comp_min;
+ u8 comp_max;
+ u8 trackpad_x;
+ u8 trackpad_y;
+} __packed;
+
+struct iqs626_ch_reg_ulp {
+ u8 thresh[2];
+ u8 hyst;
+ u8 filter;
+ u8 engine[2];
+ u8 ati_target;
+ u8 padding;
+ __be16 ati_comp;
+ u8 rx_enable;
+ u8 tx_enable;
+} __packed;
+
+struct iqs626_ch_reg_tp {
+ u8 thresh;
+ u8 ati_base;
+ __be16 ati_comp;
+} __packed;
+
+struct iqs626_tp_grp_reg {
+ u8 hyst;
+ u8 ati_target;
+ u8 engine[2];
+ struct iqs626_ch_reg_tp ch_reg_tp[IQS626_NUM_CH_TP_3];
+} __packed;
+
+struct iqs626_ch_reg_gen {
+ u8 thresh[3];
+ u8 padding;
+ u8 hyst;
+ u8 ati_target;
+ __be16 ati_comp;
+ u8 engine[5];
+ u8 filter;
+ u8 rx_enable;
+ u8 tx_enable;
+ u8 assoc_select;
+ u8 assoc_weight;
+} __packed;
+
+struct iqs626_ch_reg_hall {
+ u8 engine;
+ u8 thresh;
+ u8 hyst;
+ u8 ati_target;
+ __be16 ati_comp;
+} __packed;
+
+struct iqs626_sys_reg {
+ __be16 general;
+ u8 misc_a;
+ u8 event_mask;
+ u8 active;
+ u8 reseed;
+ u8 rate_np;
+ u8 rate_lp;
+ u8 rate_ulp;
+ u8 timeout_pwr;
+ u8 timeout_rdy;
+ u8 timeout_lta;
+ u8 misc_b;
+ u8 thresh_swipe;
+ u8 timeout_tap;
+ u8 timeout_swipe;
+ u8 redo_ati;
+ u8 padding;
+ struct iqs626_ch_reg_ulp ch_reg_ulp;
+ struct iqs626_tp_grp_reg tp_grp_reg;
+ struct iqs626_ch_reg_gen ch_reg_gen[IQS626_NUM_CH_GEN];
+ struct iqs626_ch_reg_hall ch_reg_hall;
+} __packed;
+
+struct iqs626_channel_desc {
+ const char *name;
+ int num_ch;
+ u8 active;
+ bool events[ARRAY_SIZE(iqs626_events)];
+};
+
+static const struct iqs626_channel_desc iqs626_channels[] = {
+ [IQS626_CH_ULP_0] = {
+ .name = "ulp-0",
+ .num_ch = 1,
+ .active = BIT(0),
+ .events = {
+ [IQS626_EVENT_PROX_DN] = true,
+ [IQS626_EVENT_PROX_UP] = true,
+ [IQS626_EVENT_TOUCH_DN] = true,
+ [IQS626_EVENT_TOUCH_UP] = true,
+ },
+ },
+ [IQS626_CH_TP_2] = {
+ .name = "trackpad-3x2",
+ .num_ch = IQS626_NUM_CH_TP_2,
+ .active = BIT(1),
+ .events = {
+ [IQS626_EVENT_TOUCH_DN] = true,
+ },
+ },
+ [IQS626_CH_TP_3] = {
+ .name = "trackpad-3x3",
+ .num_ch = IQS626_NUM_CH_TP_3,
+ .active = BIT(2) | BIT(1),
+ .events = {
+ [IQS626_EVENT_TOUCH_DN] = true,
+ },
+ },
+ [IQS626_CH_GEN_0] = {
+ .name = "generic-0",
+ .num_ch = 1,
+ .active = BIT(4),
+ .events = {
+ [IQS626_EVENT_PROX_DN] = true,
+ [IQS626_EVENT_PROX_UP] = true,
+ [IQS626_EVENT_TOUCH_DN] = true,
+ [IQS626_EVENT_TOUCH_UP] = true,
+ [IQS626_EVENT_DEEP_DN] = true,
+ [IQS626_EVENT_DEEP_UP] = true,
+ },
+ },
+ [IQS626_CH_GEN_1] = {
+ .name = "generic-1",
+ .num_ch = 1,
+ .active = BIT(5),
+ .events = {
+ [IQS626_EVENT_PROX_DN] = true,
+ [IQS626_EVENT_PROX_UP] = true,
+ [IQS626_EVENT_TOUCH_DN] = true,
+ [IQS626_EVENT_TOUCH_UP] = true,
+ [IQS626_EVENT_DEEP_DN] = true,
+ [IQS626_EVENT_DEEP_UP] = true,
+ },
+ },
+ [IQS626_CH_GEN_2] = {
+ .name = "generic-2",
+ .num_ch = 1,
+ .active = BIT(6),
+ .events = {
+ [IQS626_EVENT_PROX_DN] = true,
+ [IQS626_EVENT_PROX_UP] = true,
+ [IQS626_EVENT_TOUCH_DN] = true,
+ [IQS626_EVENT_TOUCH_UP] = true,
+ [IQS626_EVENT_DEEP_DN] = true,
+ [IQS626_EVENT_DEEP_UP] = true,
+ },
+ },
+ [IQS626_CH_HALL] = {
+ .name = "hall",
+ .num_ch = 1,
+ .active = BIT(7),
+ .events = {
+ [IQS626_EVENT_TOUCH_DN] = true,
+ [IQS626_EVENT_TOUCH_UP] = true,
+ },
+ },
+};
+
+struct iqs626_private {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct iqs626_sys_reg sys_reg;
+ struct completion ati_done;
+ struct input_dev *keypad;
+ struct input_dev *trackpad;
+ struct touchscreen_properties prop;
+ unsigned int kp_type[ARRAY_SIZE(iqs626_channels)]
+ [ARRAY_SIZE(iqs626_events)];
+ unsigned int kp_code[ARRAY_SIZE(iqs626_channels)]
+ [ARRAY_SIZE(iqs626_events)];
+ unsigned int tp_code[IQS626_NUM_GESTURES];
+ unsigned int suspend_mode;
+};
+
+static int iqs626_parse_events(struct iqs626_private *iqs626,
+ const struct fwnode_handle *ch_node,
+ enum iqs626_ch_id ch_id)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ const struct fwnode_handle *ev_node;
+ const char *ev_name;
+ u8 *thresh, *hyst;
+ unsigned int thresh_tp[IQS626_NUM_CH_TP_3];
+ unsigned int val;
+ int num_ch = iqs626_channels[ch_id].num_ch;
+ int error, i, j;
+
+ switch (ch_id) {
+ case IQS626_CH_ULP_0:
+ thresh = sys_reg->ch_reg_ulp.thresh;
+ hyst = &sys_reg->ch_reg_ulp.hyst;
+ break;
+
+ case IQS626_CH_TP_2:
+ case IQS626_CH_TP_3:
+ thresh = &sys_reg->tp_grp_reg.ch_reg_tp[0].thresh;
+ hyst = &sys_reg->tp_grp_reg.hyst;
+ break;
+
+ case IQS626_CH_GEN_0:
+ case IQS626_CH_GEN_1:
+ case IQS626_CH_GEN_2:
+ i = ch_id - IQS626_CH_GEN_0;
+ thresh = sys_reg->ch_reg_gen[i].thresh;
+ hyst = &sys_reg->ch_reg_gen[i].hyst;
+ break;
+
+ case IQS626_CH_HALL:
+ thresh = &sys_reg->ch_reg_hall.thresh;
+ hyst = &sys_reg->ch_reg_hall.hyst;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(iqs626_events); i++) {
+ if (!iqs626_channels[ch_id].events[i])
+ continue;
+
+ if (ch_id == IQS626_CH_TP_2 || ch_id == IQS626_CH_TP_3) {
+ /*
+ * Trackpad touch events are simply described under the
+ * trackpad child node.
+ */
+ ev_node = ch_node;
+ } else {
+ ev_name = iqs626_events[i].name;
+ ev_node = fwnode_get_named_child_node(ch_node, ev_name);
+ if (!ev_node)
+ continue;
+
+ if (!fwnode_property_read_u32(ev_node, "linux,code",
+ &val)) {
+ iqs626->kp_code[ch_id][i] = val;
+
+ if (fwnode_property_read_u32(ev_node,
+ "linux,input-type",
+ &val)) {
+ if (ch_id == IQS626_CH_HALL)
+ val = EV_SW;
+ else
+ val = EV_KEY;
+ }
+
+ if (val != EV_KEY && val != EV_SW) {
+ dev_err(&client->dev,
+ "Invalid input type: %u\n",
+ val);
+ return -EINVAL;
+ }
+
+ iqs626->kp_type[ch_id][i] = val;
+
+ sys_reg->event_mask &= ~iqs626_events[i].mask;
+ }
+ }
+
+ if (!fwnode_property_read_u32(ev_node, "azoteq,hyst", &val)) {
+ if (val > IQS626_CHx_HYST_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel hysteresis: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ if (i == IQS626_EVENT_DEEP_DN ||
+ i == IQS626_EVENT_DEEP_UP) {
+ *hyst &= ~IQS626_CHx_HYST_DEEP_MASK;
+ *hyst |= (val << IQS626_CHx_HYST_DEEP_SHIFT);
+ } else if (i == IQS626_EVENT_TOUCH_DN ||
+ i == IQS626_EVENT_TOUCH_UP) {
+ *hyst &= ~IQS626_CHx_HYST_TOUCH_MASK;
+ *hyst |= val;
+ }
+ }
+
+ if (ch_id != IQS626_CH_TP_2 && ch_id != IQS626_CH_TP_3 &&
+ !fwnode_property_read_u32(ev_node, "azoteq,thresh", &val)) {
+ if (val > IQS626_CHx_THRESH_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel threshold: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ if (ch_id == IQS626_CH_HALL)
+ *thresh = val;
+ else
+ *(thresh + iqs626_events[i].th_offs) = val;
+
+ continue;
+ }
+
+ if (!fwnode_property_present(ev_node, "azoteq,thresh"))
+ continue;
+
+ error = fwnode_property_read_u32_array(ev_node, "azoteq,thresh",
+ thresh_tp, num_ch);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to read %s channel thresholds: %d\n",
+ fwnode_get_name(ch_node), error);
+ return error;
+ }
+
+ for (j = 0; j < num_ch; j++) {
+ if (thresh_tp[j] > IQS626_CHx_THRESH_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel threshold: %u\n",
+ fwnode_get_name(ch_node), thresh_tp[j]);
+ return -EINVAL;
+ }
+
+ sys_reg->tp_grp_reg.ch_reg_tp[j].thresh = thresh_tp[j];
+ }
+ }
+
+ return 0;
+}
+
+static int iqs626_parse_ati_target(struct iqs626_private *iqs626,
+ const struct fwnode_handle *ch_node,
+ enum iqs626_ch_id ch_id)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ unsigned int ati_base[IQS626_NUM_CH_TP_3];
+ unsigned int val;
+ u8 *ati_target;
+ int num_ch = iqs626_channels[ch_id].num_ch;
+ int error, i;
+
+ switch (ch_id) {
+ case IQS626_CH_ULP_0:
+ ati_target = &sys_reg->ch_reg_ulp.ati_target;
+ break;
+
+ case IQS626_CH_TP_2:
+ case IQS626_CH_TP_3:
+ ati_target = &sys_reg->tp_grp_reg.ati_target;
+ break;
+
+ case IQS626_CH_GEN_0:
+ case IQS626_CH_GEN_1:
+ case IQS626_CH_GEN_2:
+ i = ch_id - IQS626_CH_GEN_0;
+ ati_target = &sys_reg->ch_reg_gen[i].ati_target;
+ break;
+
+ case IQS626_CH_HALL:
+ ati_target = &sys_reg->ch_reg_hall.ati_target;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,ati-target", &val)) {
+ if (val > IQS626_CHx_ATI_TARGET_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel ATI target: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *ati_target &= ~IQS626_CHx_ATI_TARGET_MASK;
+ *ati_target |= (val / 32);
+ }
+
+ if (ch_id != IQS626_CH_TP_2 && ch_id != IQS626_CH_TP_3 &&
+ !fwnode_property_read_u32(ch_node, "azoteq,ati-base", &val)) {
+ switch (val) {
+ case 75:
+ val = IQS626_CHx_ATI_BASE_75;
+ break;
+
+ case 100:
+ val = IQS626_CHx_ATI_BASE_100;
+ break;
+
+ case 150:
+ val = IQS626_CHx_ATI_BASE_150;
+ break;
+
+ case 200:
+ val = IQS626_CHx_ATI_BASE_200;
+ break;
+
+ default:
+ dev_err(&client->dev,
+ "Invalid %s channel ATI base: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *ati_target &= ~IQS626_CHx_ATI_BASE_MASK;
+ *ati_target |= val;
+
+ return 0;
+ }
+
+ if (!fwnode_property_present(ch_node, "azoteq,ati-base"))
+ return 0;
+
+ error = fwnode_property_read_u32_array(ch_node, "azoteq,ati-base",
+ ati_base, num_ch);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to read %s channel ATI bases: %d\n",
+ fwnode_get_name(ch_node), error);
+ return error;
+ }
+
+ for (i = 0; i < num_ch; i++) {
+ if (ati_base[i] < IQS626_TPx_ATI_BASE_MIN ||
+ ati_base[i] > IQS626_TPx_ATI_BASE_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel ATI base: %u\n",
+ fwnode_get_name(ch_node), ati_base[i]);
+ return -EINVAL;
+ }
+
+ ati_base[i] -= IQS626_TPx_ATI_BASE_MIN;
+ sys_reg->tp_grp_reg.ch_reg_tp[i].ati_base = ati_base[i];
+ }
+
+ return 0;
+}
+
+static int iqs626_parse_pins(struct iqs626_private *iqs626,
+ const struct fwnode_handle *ch_node,
+ const char *propname, u8 *enable)
+{
+ struct i2c_client *client = iqs626->client;
+ unsigned int val[IQS626_NUM_CRx_TX];
+ int error, count, i;
+
+ if (!fwnode_property_present(ch_node, propname))
+ return 0;
+
+ count = fwnode_property_count_u32(ch_node, propname);
+ if (count > IQS626_NUM_CRx_TX) {
+ dev_err(&client->dev,
+ "Too many %s channel CRX/TX pins present\n",
+ fwnode_get_name(ch_node));
+ return -EINVAL;
+ } else if (count < 0) {
+ dev_err(&client->dev,
+ "Failed to count %s channel CRX/TX pins: %d\n",
+ fwnode_get_name(ch_node), count);
+ return count;
+ }
+
+ error = fwnode_property_read_u32_array(ch_node, propname, val, count);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to read %s channel CRX/TX pins: %d\n",
+ fwnode_get_name(ch_node), error);
+ return error;
+ }
+
+ *enable = 0;
+
+ for (i = 0; i < count; i++) {
+ if (val[i] >= IQS626_NUM_CRx_TX) {
+ dev_err(&client->dev,
+ "Invalid %s channel CRX/TX pin: %u\n",
+ fwnode_get_name(ch_node), val[i]);
+ return -EINVAL;
+ }
+
+ *enable |= BIT(val[i]);
+ }
+
+ return 0;
+}
+
+static int iqs626_parse_trackpad(struct iqs626_private *iqs626,
+ const struct fwnode_handle *ch_node)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ u8 *hyst = &sys_reg->tp_grp_reg.hyst;
+ unsigned int val;
+ int error, count;
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,lta-update", &val)) {
+ if (val > IQS626_MISC_A_TPx_LTA_UPDATE_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel update rate: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ sys_reg->misc_a &= ~IQS626_MISC_A_TPx_LTA_UPDATE_MASK;
+ sys_reg->misc_a |= (val << IQS626_MISC_A_TPx_LTA_UPDATE_SHIFT);
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-trackpad",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ sys_reg->misc_b &= ~IQS626_MISC_B_FILT_STR_TPx;
+ sys_reg->misc_b |= val;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-cnt",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *hyst &= ~IQS626_FILT_STR_NP_TPx_MASK;
+ *hyst |= (val << IQS626_FILT_STR_NP_TPx_SHIFT);
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-cnt",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *hyst &= ~IQS626_FILT_STR_LP_TPx_MASK;
+ *hyst |= (val << IQS626_FILT_STR_LP_TPx_SHIFT);
+ }
+
+ if (!fwnode_property_present(ch_node, "linux,keycodes"))
+ return 0;
+
+ count = fwnode_property_count_u32(ch_node, "linux,keycodes");
+ if (count > IQS626_NUM_GESTURES) {
+ dev_err(&client->dev, "Too many keycodes present\n");
+ return -EINVAL;
+ } else if (count < 0) {
+ dev_err(&client->dev, "Failed to count keycodes: %d\n", count);
+ return count;
+ }
+
+ error = fwnode_property_read_u32_array(ch_node, "linux,keycodes",
+ iqs626->tp_code, count);
+ if (error) {
+ dev_err(&client->dev, "Failed to read keycodes: %d\n", error);
+ return error;
+ }
+
+ sys_reg->misc_b &= ~IQS626_MISC_B_TPx_SWIPE;
+ if (fwnode_property_present(ch_node, "azoteq,gesture-swipe"))
+ sys_reg->misc_b |= IQS626_MISC_B_TPx_SWIPE;
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,timeout-tap-ms",
+ &val)) {
+ if (val > IQS626_TIMEOUT_TAP_MS_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel timeout: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ sys_reg->timeout_tap = val / 16;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,timeout-swipe-ms",
+ &val)) {
+ if (val > IQS626_TIMEOUT_SWIPE_MS_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel timeout: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ sys_reg->timeout_swipe = val / 16;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,thresh-swipe",
+ &val)) {
+ if (val > IQS626_THRESH_SWIPE_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel threshold: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ sys_reg->thresh_swipe = val;
+ }
+
+ sys_reg->event_mask &= ~IQS626_EVENT_MASK_GESTURE;
+
+ return 0;
+}
+
+static int iqs626_parse_channel(struct iqs626_private *iqs626,
+ const struct fwnode_handle *ch_node,
+ enum iqs626_ch_id ch_id)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ u8 *engine, *filter, *rx_enable, *tx_enable;
+ u8 *assoc_select, *assoc_weight;
+ unsigned int val;
+ int error, i;
+
+ switch (ch_id) {
+ case IQS626_CH_ULP_0:
+ engine = sys_reg->ch_reg_ulp.engine;
+ break;
+
+ case IQS626_CH_TP_2:
+ case IQS626_CH_TP_3:
+ engine = sys_reg->tp_grp_reg.engine;
+ break;
+
+ case IQS626_CH_GEN_0:
+ case IQS626_CH_GEN_1:
+ case IQS626_CH_GEN_2:
+ i = ch_id - IQS626_CH_GEN_0;
+ engine = sys_reg->ch_reg_gen[i].engine;
+ break;
+
+ case IQS626_CH_HALL:
+ engine = &sys_reg->ch_reg_hall.engine;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ *engine |= IQS626_CHx_ENG_0_MEAS_CAP_SIZE;
+ if (fwnode_property_present(ch_node, "azoteq,meas-cap-decrease"))
+ *engine &= ~IQS626_CHx_ENG_0_MEAS_CAP_SIZE;
+
+ *engine |= IQS626_CHx_ENG_0_RX_TERM_VSS;
+ if (!fwnode_property_read_u32(ch_node, "azoteq,rx-inactive", &val)) {
+ switch (val) {
+ case IQS626_RX_INACTIVE_VSS:
+ break;
+
+ case IQS626_RX_INACTIVE_FLOAT:
+ *engine &= ~IQS626_CHx_ENG_0_RX_TERM_VSS;
+ if (ch_id == IQS626_CH_GEN_0 ||
+ ch_id == IQS626_CH_GEN_1 ||
+ ch_id == IQS626_CH_GEN_2)
+ *(engine + 4) &= ~IQS626_CHx_ENG_4_RX_TERM_VREG;
+ break;
+
+ case IQS626_RX_INACTIVE_VREG:
+ if (ch_id == IQS626_CH_GEN_0 ||
+ ch_id == IQS626_CH_GEN_1 ||
+ ch_id == IQS626_CH_GEN_2) {
+ *engine &= ~IQS626_CHx_ENG_0_RX_TERM_VSS;
+ *(engine + 4) |= IQS626_CHx_ENG_4_RX_TERM_VREG;
+ break;
+ }
+ fallthrough;
+
+ default:
+ dev_err(&client->dev,
+ "Invalid %s channel CRX pin termination: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+ }
+
+ *engine &= ~IQS626_CHx_ENG_0_LINEARIZE;
+ if (fwnode_property_present(ch_node, "azoteq,linearize"))
+ *engine |= IQS626_CHx_ENG_0_LINEARIZE;
+
+ *engine &= ~IQS626_CHx_ENG_0_DUAL_DIR;
+ if (fwnode_property_present(ch_node, "azoteq,dual-direction"))
+ *engine |= IQS626_CHx_ENG_0_DUAL_DIR;
+
+ *engine &= ~IQS626_CHx_ENG_0_FILT_DISABLE;
+ if (fwnode_property_present(ch_node, "azoteq,filt-disable"))
+ *engine |= IQS626_CHx_ENG_0_FILT_DISABLE;
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,ati-mode", &val)) {
+ if (val > IQS626_CHx_ENG_0_ATI_MODE_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel ATI mode: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *engine &= ~IQS626_CHx_ENG_0_ATI_MODE_MASK;
+ *engine |= val;
+ }
+
+ if (ch_id == IQS626_CH_HALL)
+ return 0;
+
+ *(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_ENABLE;
+ if (!fwnode_property_read_u32(ch_node, "azoteq,cct-increase",
+ &val) && val) {
+ unsigned int orig_val = val--;
+
+ /*
+ * In the case of the generic channels, the charge cycle time
+ * field doubles in size and straddles two separate registers.
+ */
+ if (ch_id == IQS626_CH_GEN_0 ||
+ ch_id == IQS626_CH_GEN_1 ||
+ ch_id == IQS626_CH_GEN_2) {
+ *(engine + 4) &= ~IQS626_CHx_ENG_4_CCT_LOW_1;
+ if (val & BIT(1))
+ *(engine + 4) |= IQS626_CHx_ENG_4_CCT_LOW_1;
+
+ *(engine + 4) &= ~IQS626_CHx_ENG_4_CCT_LOW_0;
+ if (val & BIT(0))
+ *(engine + 4) |= IQS626_CHx_ENG_4_CCT_LOW_0;
+
+ val >>= 2;
+ }
+
+ if (val & ~GENMASK(1, 0)) {
+ dev_err(&client->dev,
+ "Invalid %s channel charge cycle time: %u\n",
+ fwnode_get_name(ch_node), orig_val);
+ return -EINVAL;
+ }
+
+ *(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_HIGH_1;
+ if (val & BIT(1))
+ *(engine + 1) |= IQS626_CHx_ENG_1_CCT_HIGH_1;
+
+ *(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_HIGH_0;
+ if (val & BIT(0))
+ *(engine + 1) |= IQS626_CHx_ENG_1_CCT_HIGH_0;
+
+ *(engine + 1) |= IQS626_CHx_ENG_1_CCT_ENABLE;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,proj-bias", &val)) {
+ if (val > IQS626_CHx_ENG_1_PROJ_BIAS_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel bias current: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *(engine + 1) &= ~IQS626_CHx_ENG_1_PROJ_BIAS_MASK;
+ *(engine + 1) |= (val << IQS626_CHx_ENG_1_PROJ_BIAS_SHIFT);
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,sense-freq", &val)) {
+ if (val > IQS626_CHx_ENG_1_SENSE_FREQ_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel sensing frequency: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *(engine + 1) &= ~IQS626_CHx_ENG_1_SENSE_FREQ_MASK;
+ *(engine + 1) |= (val << IQS626_CHx_ENG_1_SENSE_FREQ_SHIFT);
+ }
+
+ *(engine + 1) &= ~IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN;
+ if (fwnode_property_present(ch_node, "azoteq,ati-band-tighten"))
+ *(engine + 1) |= IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN;
+
+ if (ch_id == IQS626_CH_TP_2 || ch_id == IQS626_CH_TP_3)
+ return iqs626_parse_trackpad(iqs626, ch_node);
+
+ if (ch_id == IQS626_CH_ULP_0) {
+ sys_reg->ch_reg_ulp.hyst &= ~IQS626_ULP_PROJ_ENABLE;
+ if (fwnode_property_present(ch_node, "azoteq,proj-enable"))
+ sys_reg->ch_reg_ulp.hyst |= IQS626_ULP_PROJ_ENABLE;
+
+ filter = &sys_reg->ch_reg_ulp.filter;
+
+ rx_enable = &sys_reg->ch_reg_ulp.rx_enable;
+ tx_enable = &sys_reg->ch_reg_ulp.tx_enable;
+ } else {
+ i = ch_id - IQS626_CH_GEN_0;
+ filter = &sys_reg->ch_reg_gen[i].filter;
+
+ rx_enable = &sys_reg->ch_reg_gen[i].rx_enable;
+ tx_enable = &sys_reg->ch_reg_gen[i].tx_enable;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-cnt",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *filter &= ~IQS626_FILT_STR_NP_CNT_MASK;
+ *filter |= (val << IQS626_FILT_STR_NP_CNT_SHIFT);
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-cnt",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *filter &= ~IQS626_FILT_STR_LP_CNT_MASK;
+ *filter |= (val << IQS626_FILT_STR_LP_CNT_SHIFT);
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-lta",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *filter &= ~IQS626_FILT_STR_NP_LTA_MASK;
+ *filter |= (val << IQS626_FILT_STR_NP_LTA_SHIFT);
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-lta",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *filter &= ~IQS626_FILT_STR_LP_LTA_MASK;
+ *filter |= val;
+ }
+
+ error = iqs626_parse_pins(iqs626, ch_node, "azoteq,rx-enable",
+ rx_enable);
+ if (error)
+ return error;
+
+ error = iqs626_parse_pins(iqs626, ch_node, "azoteq,tx-enable",
+ tx_enable);
+ if (error)
+ return error;
+
+ if (ch_id == IQS626_CH_ULP_0)
+ return 0;
+
+ *(engine + 2) &= ~IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE;
+ if (!fwnode_property_read_u32(ch_node, "azoteq,local-cap-size",
+ &val) && val) {
+ unsigned int orig_val = val--;
+
+ if (val > IQS626_CHx_ENG_2_LOCAL_CAP_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel local cap. size: %u\n",
+ fwnode_get_name(ch_node), orig_val);
+ return -EINVAL;
+ }
+
+ *(engine + 2) &= ~IQS626_CHx_ENG_2_LOCAL_CAP_MASK;
+ *(engine + 2) |= (val << IQS626_CHx_ENG_2_LOCAL_CAP_SHIFT);
+
+ *(engine + 2) |= IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,sense-mode", &val)) {
+ if (val > IQS626_CHx_ENG_2_SENSE_MODE_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel sensing mode: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *(engine + 2) &= ~IQS626_CHx_ENG_2_SENSE_MODE_MASK;
+ *(engine + 2) |= val;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,tx-freq", &val)) {
+ if (val > IQS626_CHx_ENG_3_TX_FREQ_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel excitation frequency: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *(engine + 3) &= ~IQS626_CHx_ENG_3_TX_FREQ_MASK;
+ *(engine + 3) |= (val << IQS626_CHx_ENG_3_TX_FREQ_SHIFT);
+ }
+
+ *(engine + 3) &= ~IQS626_CHx_ENG_3_INV_LOGIC;
+ if (fwnode_property_present(ch_node, "azoteq,invert-enable"))
+ *(engine + 3) |= IQS626_CHx_ENG_3_INV_LOGIC;
+
+ *(engine + 4) &= ~IQS626_CHx_ENG_4_COMP_DISABLE;
+ if (fwnode_property_present(ch_node, "azoteq,comp-disable"))
+ *(engine + 4) |= IQS626_CHx_ENG_4_COMP_DISABLE;
+
+ *(engine + 4) &= ~IQS626_CHx_ENG_4_STATIC_ENABLE;
+ if (fwnode_property_present(ch_node, "azoteq,static-enable"))
+ *(engine + 4) |= IQS626_CHx_ENG_4_STATIC_ENABLE;
+
+ i = ch_id - IQS626_CH_GEN_0;
+ assoc_select = &sys_reg->ch_reg_gen[i].assoc_select;
+ assoc_weight = &sys_reg->ch_reg_gen[i].assoc_weight;
+
+ *assoc_select = 0;
+ if (!fwnode_property_present(ch_node, "azoteq,assoc-select"))
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) {
+ if (fwnode_property_match_string(ch_node, "azoteq,assoc-select",
+ iqs626_channels[i].name) < 0)
+ continue;
+
+ *assoc_select |= iqs626_channels[i].active;
+ }
+
+ if (fwnode_property_read_u32(ch_node, "azoteq,assoc-weight", &val))
+ return 0;
+
+ if (val > IQS626_GEN_WEIGHT_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel associated weight: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *assoc_weight = val;
+
+ return 0;
+}
+
+static int iqs626_parse_prop(struct iqs626_private *iqs626)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ struct fwnode_handle *ch_node;
+ unsigned int val;
+ int error, i;
+ u16 general;
+
+ if (!device_property_read_u32(&client->dev, "azoteq,suspend-mode",
+ &val)) {
+ if (val > IQS626_SYS_SETTINGS_PWR_MODE_MAX) {
+ dev_err(&client->dev, "Invalid suspend mode: %u\n",
+ val);
+ return -EINVAL;
+ }
+
+ iqs626->suspend_mode = val;
+ }
+
+ error = regmap_raw_read(iqs626->regmap, IQS626_SYS_SETTINGS, sys_reg,
+ sizeof(*sys_reg));
+ if (error)
+ return error;
+
+ general = be16_to_cpu(sys_reg->general);
+ general &= IQS626_SYS_SETTINGS_ULP_UPDATE_MASK;
+
+ if (device_property_present(&client->dev, "azoteq,clk-div"))
+ general |= IQS626_SYS_SETTINGS_CLK_DIV;
+
+ if (device_property_present(&client->dev, "azoteq,ulp-enable"))
+ general |= IQS626_SYS_SETTINGS_ULP_AUTO;
+
+ if (!device_property_read_u32(&client->dev, "azoteq,ulp-update",
+ &val)) {
+ if (val > IQS626_SYS_SETTINGS_ULP_UPDATE_MAX) {
+ dev_err(&client->dev, "Invalid update rate: %u\n", val);
+ return -EINVAL;
+ }
+
+ general &= ~IQS626_SYS_SETTINGS_ULP_UPDATE_MASK;
+ general |= (val << IQS626_SYS_SETTINGS_ULP_UPDATE_SHIFT);
+ }
+
+ sys_reg->misc_a &= ~IQS626_MISC_A_ATI_BAND_DISABLE;
+ if (device_property_present(&client->dev, "azoteq,ati-band-disable"))
+ sys_reg->misc_a |= IQS626_MISC_A_ATI_BAND_DISABLE;
+
+ sys_reg->misc_a &= ~IQS626_MISC_A_ATI_LP_ONLY;
+ if (device_property_present(&client->dev, "azoteq,ati-lp-only"))
+ sys_reg->misc_a |= IQS626_MISC_A_ATI_LP_ONLY;
+
+ if (!device_property_read_u32(&client->dev, "azoteq,gpio3-select",
+ &val)) {
+ if (val > IQS626_MISC_A_GPIO3_SELECT_MAX) {
+ dev_err(&client->dev, "Invalid GPIO3 selection: %u\n",
+ val);
+ return -EINVAL;
+ }
+
+ sys_reg->misc_a &= ~IQS626_MISC_A_GPIO3_SELECT_MASK;
+ sys_reg->misc_a |= val;
+ }
+
+ if (!device_property_read_u32(&client->dev, "azoteq,reseed-select",
+ &val)) {
+ if (val > IQS626_MISC_B_RESEED_UI_SEL_MAX) {
+ dev_err(&client->dev, "Invalid reseed selection: %u\n",
+ val);
+ return -EINVAL;
+ }
+
+ sys_reg->misc_b &= ~IQS626_MISC_B_RESEED_UI_SEL_MASK;
+ sys_reg->misc_b |= (val << IQS626_MISC_B_RESEED_UI_SEL_SHIFT);
+ }
+
+ sys_reg->misc_b &= ~IQS626_MISC_B_THRESH_EXTEND;
+ if (device_property_present(&client->dev, "azoteq,thresh-extend"))
+ sys_reg->misc_b |= IQS626_MISC_B_THRESH_EXTEND;
+
+ sys_reg->misc_b &= ~IQS626_MISC_B_TRACKING_UI_ENABLE;
+ if (device_property_present(&client->dev, "azoteq,tracking-enable"))
+ sys_reg->misc_b |= IQS626_MISC_B_TRACKING_UI_ENABLE;
+
+ sys_reg->misc_b &= ~IQS626_MISC_B_RESEED_OFFSET;
+ if (device_property_present(&client->dev, "azoteq,reseed-offset"))
+ sys_reg->misc_b |= IQS626_MISC_B_RESEED_OFFSET;
+
+ if (!device_property_read_u32(&client->dev, "azoteq,rate-np-ms",
+ &val)) {
+ if (val > IQS626_RATE_NP_MS_MAX) {
+ dev_err(&client->dev, "Invalid report rate: %u\n", val);
+ return -EINVAL;
+ }
+
+ sys_reg->rate_np = val;
+ }
+
+ if (!device_property_read_u32(&client->dev, "azoteq,rate-lp-ms",
+ &val)) {
+ if (val > IQS626_RATE_LP_MS_MAX) {
+ dev_err(&client->dev, "Invalid report rate: %u\n", val);
+ return -EINVAL;
+ }
+
+ sys_reg->rate_lp = val;
+ }
+
+ if (!device_property_read_u32(&client->dev, "azoteq,rate-ulp-ms",
+ &val)) {
+ if (val > IQS626_RATE_ULP_MS_MAX) {
+ dev_err(&client->dev, "Invalid report rate: %u\n", val);
+ return -EINVAL;
+ }
+
+ sys_reg->rate_ulp = val / 16;
+ }
+
+ if (!device_property_read_u32(&client->dev, "azoteq,timeout-pwr-ms",
+ &val)) {
+ if (val > IQS626_TIMEOUT_PWR_MS_MAX) {
+ dev_err(&client->dev, "Invalid timeout: %u\n", val);
+ return -EINVAL;
+ }
+
+ sys_reg->timeout_pwr = val / 512;
+ }
+
+ if (!device_property_read_u32(&client->dev, "azoteq,timeout-lta-ms",
+ &val)) {
+ if (val > IQS626_TIMEOUT_LTA_MS_MAX) {
+ dev_err(&client->dev, "Invalid timeout: %u\n", val);
+ return -EINVAL;
+ }
+
+ sys_reg->timeout_lta = val / 512;
+ }
+
+ sys_reg->event_mask = ~((u8)IQS626_EVENT_MASK_SYS);
+ sys_reg->redo_ati = 0;
+
+ sys_reg->reseed = 0;
+ sys_reg->active = 0;
+
+ for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) {
+ ch_node = device_get_named_child_node(&client->dev,
+ iqs626_channels[i].name);
+ if (!ch_node)
+ continue;
+
+ error = iqs626_parse_channel(iqs626, ch_node, i);
+ if (error)
+ return error;
+
+ error = iqs626_parse_ati_target(iqs626, ch_node, i);
+ if (error)
+ return error;
+
+ error = iqs626_parse_events(iqs626, ch_node, i);
+ if (error)
+ return error;
+
+ if (!fwnode_property_present(ch_node, "azoteq,ati-exclude"))
+ sys_reg->redo_ati |= iqs626_channels[i].active;
+
+ if (!fwnode_property_present(ch_node, "azoteq,reseed-disable"))
+ sys_reg->reseed |= iqs626_channels[i].active;
+
+ sys_reg->active |= iqs626_channels[i].active;
+ }
+
+ general |= IQS626_SYS_SETTINGS_EVENT_MODE;
+
+ /*
+ * Enable streaming during normal-power mode if the trackpad is used to
+ * report raw coordinates instead of gestures. In that case, the device
+ * returns to event mode during low-power mode.
+ */
+ if (sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active &&
+ sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE)
+ general |= IQS626_SYS_SETTINGS_EVENT_MODE_LP;
+
+ general |= IQS626_SYS_SETTINGS_REDO_ATI;
+ general |= IQS626_SYS_SETTINGS_ACK_RESET;
+
+ sys_reg->general = cpu_to_be16(general);
+
+ error = regmap_raw_write(iqs626->regmap, IQS626_SYS_SETTINGS,
+ &iqs626->sys_reg, sizeof(iqs626->sys_reg));
+ if (error)
+ return error;
+
+ iqs626_irq_wait();
+
+ return 0;
+}
+
+static int iqs626_input_init(struct iqs626_private *iqs626)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ int error, i, j;
+
+ iqs626->keypad = devm_input_allocate_device(&client->dev);
+ if (!iqs626->keypad)
+ return -ENOMEM;
+
+ iqs626->keypad->keycodemax = ARRAY_SIZE(iqs626->kp_code);
+ iqs626->keypad->keycode = iqs626->kp_code;
+ iqs626->keypad->keycodesize = sizeof(**iqs626->kp_code);
+
+ iqs626->keypad->name = "iqs626a_keypad";
+ iqs626->keypad->id.bustype = BUS_I2C;
+
+ for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) {
+ if (!(sys_reg->active & iqs626_channels[i].active))
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(iqs626_events); j++) {
+ if (!iqs626->kp_type[i][j])
+ continue;
+
+ input_set_capability(iqs626->keypad,
+ iqs626->kp_type[i][j],
+ iqs626->kp_code[i][j]);
+ }
+ }
+
+ if (!(sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active))
+ return 0;
+
+ iqs626->trackpad = devm_input_allocate_device(&client->dev);
+ if (!iqs626->trackpad)
+ return -ENOMEM;
+
+ iqs626->trackpad->keycodemax = ARRAY_SIZE(iqs626->tp_code);
+ iqs626->trackpad->keycode = iqs626->tp_code;
+ iqs626->trackpad->keycodesize = sizeof(*iqs626->tp_code);
+
+ iqs626->trackpad->name = "iqs626a_trackpad";
+ iqs626->trackpad->id.bustype = BUS_I2C;
+
+ /*
+ * Present the trackpad as a traditional pointing device if no gestures
+ * have been mapped to a keycode.
+ */
+ if (sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE) {
+ u8 tp_mask = iqs626_channels[IQS626_CH_TP_3].active;
+
+ input_set_capability(iqs626->trackpad, EV_KEY, BTN_TOUCH);
+ input_set_abs_params(iqs626->trackpad, ABS_Y, 0, 255, 0, 0);
+
+ if ((sys_reg->active & tp_mask) == tp_mask)
+ input_set_abs_params(iqs626->trackpad,
+ ABS_X, 0, 255, 0, 0);
+ else
+ input_set_abs_params(iqs626->trackpad,
+ ABS_X, 0, 128, 0, 0);
+
+ touchscreen_parse_properties(iqs626->trackpad, false,
+ &iqs626->prop);
+ } else {
+ for (i = 0; i < IQS626_NUM_GESTURES; i++)
+ if (iqs626->tp_code[i] != KEY_RESERVED)
+ input_set_capability(iqs626->trackpad, EV_KEY,
+ iqs626->tp_code[i]);
+ }
+
+ error = input_register_device(iqs626->trackpad);
+ if (error)
+ dev_err(&client->dev, "Failed to register trackpad: %d\n",
+ error);
+
+ return error;
+}
+
+static int iqs626_report(struct iqs626_private *iqs626)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ struct iqs626_flags flags;
+ __le16 hall_output;
+ int error, i, j;
+ u8 state;
+ u8 *dir_mask = &flags.states[IQS626_ST_OFFS_DIR];
+
+ error = regmap_raw_read(iqs626->regmap, IQS626_SYS_FLAGS, &flags,
+ sizeof(flags));
+ if (error) {
+ dev_err(&client->dev, "Failed to read device status: %d\n",
+ error);
+ return error;
+ }
+
+ /*
+ * The device resets itself if its own watchdog bites, which can happen
+ * in the event of an I2C communication error. In this case, the device
+ * asserts a SHOW_RESET interrupt and all registers must be restored.
+ */
+ if (be16_to_cpu(flags.system) & IQS626_SYS_FLAGS_SHOW_RESET) {
+ dev_err(&client->dev, "Unexpected device reset\n");
+
+ error = regmap_raw_write(iqs626->regmap, IQS626_SYS_SETTINGS,
+ sys_reg, sizeof(*sys_reg));
+ if (error)
+ dev_err(&client->dev,
+ "Failed to re-initialize device: %d\n", error);
+
+ return error;
+ }
+
+ if (be16_to_cpu(flags.system) & IQS626_SYS_FLAGS_IN_ATI)
+ return 0;
+
+ /*
+ * Unlike the ULP or generic channels, the Hall channel does not have a
+ * direction flag. Instead, the direction (i.e. magnet polarity) can be
+ * derived based on the sign of the 2's complement differential output.
+ */
+ if (sys_reg->active & iqs626_channels[IQS626_CH_HALL].active) {
+ error = regmap_raw_read(iqs626->regmap, IQS626_HALL_OUTPUT,
+ &hall_output, sizeof(hall_output));
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to read Hall output: %d\n", error);
+ return error;
+ }
+
+ *dir_mask &= ~iqs626_channels[IQS626_CH_HALL].active;
+ if (le16_to_cpu(hall_output) < 0x8000)
+ *dir_mask |= iqs626_channels[IQS626_CH_HALL].active;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) {
+ if (!(sys_reg->active & iqs626_channels[i].active))
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(iqs626_events); j++) {
+ if (!iqs626->kp_type[i][j])
+ continue;
+
+ state = flags.states[iqs626_events[j].st_offs];
+ state &= iqs626_events[j].dir_up ? *dir_mask
+ : ~(*dir_mask);
+ state &= iqs626_channels[i].active;
+
+ input_event(iqs626->keypad, iqs626->kp_type[i][j],
+ iqs626->kp_code[i][j], !!state);
+ }
+ }
+
+ input_sync(iqs626->keypad);
+
+ /*
+ * The following completion signals that ATI has finished, any initial
+ * switch states have been reported and the keypad can be registered.
+ */
+ complete_all(&iqs626->ati_done);
+
+ if (!(sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active))
+ return 0;
+
+ if (sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE) {
+ state = flags.states[IQS626_ST_OFFS_TOUCH];
+ state &= iqs626_channels[IQS626_CH_TP_2].active;
+
+ input_report_key(iqs626->trackpad, BTN_TOUCH, state);
+
+ if (state)
+ touchscreen_report_pos(iqs626->trackpad, &iqs626->prop,
+ flags.trackpad_x,
+ flags.trackpad_y, false);
+ } else {
+ for (i = 0; i < IQS626_NUM_GESTURES; i++)
+ input_report_key(iqs626->trackpad, iqs626->tp_code[i],
+ flags.gesture & BIT(i));
+
+ if (flags.gesture & GENMASK(IQS626_GESTURE_TAP, 0)) {
+ input_sync(iqs626->trackpad);
+
+ /*
+ * Momentary gestures are followed by a complementary
+ * release cycle so as to emulate a full keystroke.
+ */
+ for (i = 0; i < IQS626_GESTURE_HOLD; i++)
+ input_report_key(iqs626->trackpad,
+ iqs626->tp_code[i], 0);
+ }
+ }
+
+ input_sync(iqs626->trackpad);
+
+ return 0;
+}
+
+static irqreturn_t iqs626_irq(int irq, void *context)
+{
+ struct iqs626_private *iqs626 = context;
+
+ if (iqs626_report(iqs626))
+ return IRQ_NONE;
+
+ /*
+ * The device does not deassert its interrupt (RDY) pin until shortly
+ * after receiving an I2C stop condition; the following delay ensures
+ * the interrupt handler does not return before this time.
+ */
+ iqs626_irq_wait();
+
+ return IRQ_HANDLED;
+}
+
+static const struct regmap_config iqs626_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .max_register = IQS626_MAX_REG,
+};
+
+static int iqs626_probe(struct i2c_client *client)
+{
+ struct iqs626_ver_info ver_info;
+ struct iqs626_private *iqs626;
+ int error;
+
+ iqs626 = devm_kzalloc(&client->dev, sizeof(*iqs626), GFP_KERNEL);
+ if (!iqs626)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, iqs626);
+ iqs626->client = client;
+
+ iqs626->regmap = devm_regmap_init_i2c(client, &iqs626_regmap_config);
+ if (IS_ERR(iqs626->regmap)) {
+ error = PTR_ERR(iqs626->regmap);
+ dev_err(&client->dev, "Failed to initialize register map: %d\n",
+ error);
+ return error;
+ }
+
+ init_completion(&iqs626->ati_done);
+
+ error = regmap_raw_read(iqs626->regmap, IQS626_VER_INFO, &ver_info,
+ sizeof(ver_info));
+ if (error)
+ return error;
+
+ if (ver_info.prod_num != IQS626_VER_INFO_PROD_NUM) {
+ dev_err(&client->dev, "Unrecognized product number: 0x%02X\n",
+ ver_info.prod_num);
+ return -EINVAL;
+ }
+
+ error = iqs626_parse_prop(iqs626);
+ if (error)
+ return error;
+
+ error = iqs626_input_init(iqs626);
+ if (error)
+ return error;
+
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, iqs626_irq, IRQF_ONESHOT,
+ client->name, iqs626);
+ if (error) {
+ dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
+ return error;
+ }
+
+ if (!wait_for_completion_timeout(&iqs626->ati_done,
+ msecs_to_jiffies(2000))) {
+ dev_err(&client->dev, "Failed to complete ATI\n");
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * The keypad may include one or more switches and is not registered
+ * until ATI is complete and the initial switch states are read.
+ */
+ error = input_register_device(iqs626->keypad);
+ if (error)
+ dev_err(&client->dev, "Failed to register keypad: %d\n", error);
+
+ return error;
+}
+
+static int __maybe_unused iqs626_suspend(struct device *dev)
+{
+ struct iqs626_private *iqs626 = dev_get_drvdata(dev);
+ struct i2c_client *client = iqs626->client;
+ unsigned int val;
+ int error;
+
+ if (!iqs626->suspend_mode)
+ return 0;
+
+ disable_irq(client->irq);
+
+ /*
+ * Automatic power mode switching must be disabled before the device is
+ * forced into any particular power mode. In this case, the device will
+ * transition into normal-power mode.
+ */
+ error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS,
+ IQS626_SYS_SETTINGS_DIS_AUTO, ~0);
+ if (error)
+ goto err_irq;
+
+ /*
+ * The following check ensures the device has completed its transition
+ * into normal-power mode before a manual mode switch is performed.
+ */
+ error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val,
+ !(val & IQS626_SYS_FLAGS_PWR_MODE_MASK),
+ IQS626_PWR_MODE_POLL_SLEEP_US,
+ IQS626_PWR_MODE_POLL_TIMEOUT_US);
+ if (error)
+ goto err_irq;
+
+ error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS,
+ IQS626_SYS_SETTINGS_PWR_MODE_MASK,
+ iqs626->suspend_mode <<
+ IQS626_SYS_SETTINGS_PWR_MODE_SHIFT);
+ if (error)
+ goto err_irq;
+
+ /*
+ * This last check ensures the device has completed its transition into
+ * the desired power mode to prevent any spurious interrupts from being
+ * triggered after iqs626_suspend has already returned.
+ */
+ error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val,
+ (val & IQS626_SYS_FLAGS_PWR_MODE_MASK)
+ == (iqs626->suspend_mode <<
+ IQS626_SYS_FLAGS_PWR_MODE_SHIFT),
+ IQS626_PWR_MODE_POLL_SLEEP_US,
+ IQS626_PWR_MODE_POLL_TIMEOUT_US);
+
+err_irq:
+ iqs626_irq_wait();
+ enable_irq(client->irq);
+
+ return error;
+}
+
+static int __maybe_unused iqs626_resume(struct device *dev)
+{
+ struct iqs626_private *iqs626 = dev_get_drvdata(dev);
+ struct i2c_client *client = iqs626->client;
+ unsigned int val;
+ int error;
+
+ if (!iqs626->suspend_mode)
+ return 0;
+
+ disable_irq(client->irq);
+
+ error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS,
+ IQS626_SYS_SETTINGS_PWR_MODE_MASK, 0);
+ if (error)
+ goto err_irq;
+
+ /*
+ * This check ensures the device has returned to normal-power mode
+ * before automatic power mode switching is re-enabled.
+ */
+ error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val,
+ !(val & IQS626_SYS_FLAGS_PWR_MODE_MASK),
+ IQS626_PWR_MODE_POLL_SLEEP_US,
+ IQS626_PWR_MODE_POLL_TIMEOUT_US);
+ if (error)
+ goto err_irq;
+
+ error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS,
+ IQS626_SYS_SETTINGS_DIS_AUTO, 0);
+ if (error)
+ goto err_irq;
+
+ /*
+ * This step reports any events that may have been "swallowed" as a
+ * result of polling PWR_MODE (which automatically acknowledges any
+ * pending interrupts).
+ */
+ error = iqs626_report(iqs626);
+
+err_irq:
+ iqs626_irq_wait();
+ enable_irq(client->irq);
+
+ return error;
+}
+
+static SIMPLE_DEV_PM_OPS(iqs626_pm, iqs626_suspend, iqs626_resume);
+
+static const struct of_device_id iqs626_of_match[] = {
+ { .compatible = "azoteq,iqs626a" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, iqs626_of_match);
+
+static struct i2c_driver iqs626_i2c_driver = {
+ .driver = {
+ .name = "iqs626a",
+ .of_match_table = iqs626_of_match,
+ .pm = &iqs626_pm,
+ },
+ .probe_new = iqs626_probe,
+};
+module_i2c_driver(iqs626_i2c_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS626A Capacitive Touch Controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/max8997_haptic.c b/drivers/input/misc/max8997_haptic.c
index 20ff087b8a44..cd5e99ec1d3c 100644
--- a/drivers/input/misc/max8997_haptic.c
+++ b/drivers/input/misc/max8997_haptic.c
@@ -61,15 +61,10 @@ static int max8997_haptic_set_duty_cycle(struct max8997_haptic *chip)
unsigned int duty = chip->pwm_period * chip->level / 100;
ret = pwm_config(chip->pwm, duty, chip->pwm_period);
} else {
- int i;
u8 duty_index = 0;
- for (i = 0; i <= 64; i++) {
- if (chip->level <= i * 100 / 64) {
- duty_index = i;
- break;
- }
- }
+ duty_index = DIV_ROUND_UP(chip->level * 64, 100);
+
switch (chip->internal_mode_pattern) {
case 0:
max8997_write_reg(chip->client,
diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h
index e12da5b024b0..dc4a240f4489 100644
--- a/drivers/input/mouse/elan_i2c.h
+++ b/drivers/input/mouse/elan_i2c.h
@@ -55,6 +55,11 @@
#define ETP_FW_PAGE_SIZE_512 512
#define ETP_FW_SIGNATURE_SIZE 6
+#define ETP_PRODUCT_ID_DELBIN 0x00C2
+#define ETP_PRODUCT_ID_VOXEL 0x00BF
+#define ETP_PRODUCT_ID_MAGPIE 0x0120
+#define ETP_PRODUCT_ID_BOBBA 0x0121
+
struct i2c_client;
struct completion;
@@ -73,7 +78,7 @@ struct elan_transport_ops {
int (*calibrate_result)(struct i2c_client *client, u8 *val);
int (*get_baseline_data)(struct i2c_client *client,
- bool max_baseliune, u8 *value);
+ bool max_baseline, u8 *value);
int (*get_version)(struct i2c_client *client, u8 pattern, bool iap,
u8 *version);
diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index bef73822315d..dad22c1ea6a0 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -46,6 +46,9 @@
#define ETP_FINGER_WIDTH 15
#define ETP_RETRY_COUNT 3
+/* quirks to control the device */
+#define ETP_QUIRK_QUICK_WAKEUP BIT(0)
+
/* The main device structure */
struct elan_tp_data {
struct i2c_client *client;
@@ -90,8 +93,38 @@ struct elan_tp_data {
bool baseline_ready;
u8 clickpad;
bool middle_button;
+
+ u32 quirks; /* Various quirks */
};
+static u32 elan_i2c_lookup_quirks(u16 ic_type, u16 product_id)
+{
+ static const struct {
+ u16 ic_type;
+ u16 product_id;
+ u32 quirks;
+ } elan_i2c_quirks[] = {
+ { 0x0D, ETP_PRODUCT_ID_DELBIN, ETP_QUIRK_QUICK_WAKEUP },
+ { 0x10, ETP_PRODUCT_ID_VOXEL, ETP_QUIRK_QUICK_WAKEUP },
+ { 0x14, ETP_PRODUCT_ID_MAGPIE, ETP_QUIRK_QUICK_WAKEUP },
+ { 0x14, ETP_PRODUCT_ID_BOBBA, ETP_QUIRK_QUICK_WAKEUP },
+ };
+ u32 quirks = 0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(elan_i2c_quirks); i++) {
+ if (elan_i2c_quirks[i].ic_type == ic_type &&
+ elan_i2c_quirks[i].product_id == product_id) {
+ quirks = elan_i2c_quirks[i].quirks;
+ }
+ }
+
+ if (ic_type >= 0x0D && product_id >= 0x123)
+ quirks |= ETP_QUIRK_QUICK_WAKEUP;
+
+ return quirks;
+}
+
static int elan_get_fwinfo(u16 ic_type, u8 iap_version, u16 *validpage_count,
u32 *signature_address, u16 *page_size)
{
@@ -258,16 +291,18 @@ static int elan_check_ASUS_special_fw(struct elan_tp_data *data)
return false;
}
-static int __elan_initialize(struct elan_tp_data *data)
+static int __elan_initialize(struct elan_tp_data *data, bool skip_reset)
{
struct i2c_client *client = data->client;
bool woken_up = false;
int error;
- error = data->ops->initialize(client);
- if (error) {
- dev_err(&client->dev, "device initialize failed: %d\n", error);
- return error;
+ if (!skip_reset) {
+ error = data->ops->initialize(client);
+ if (error) {
+ dev_err(&client->dev, "device initialize failed: %d\n", error);
+ return error;
+ }
}
error = elan_query_product(data);
@@ -311,16 +346,17 @@ static int __elan_initialize(struct elan_tp_data *data)
return 0;
}
-static int elan_initialize(struct elan_tp_data *data)
+static int elan_initialize(struct elan_tp_data *data, bool skip_reset)
{
int repeat = ETP_RETRY_COUNT;
int error;
do {
- error = __elan_initialize(data);
+ error = __elan_initialize(data, skip_reset);
if (!error)
return 0;
+ skip_reset = false;
msleep(30);
} while (--repeat > 0);
@@ -357,6 +393,8 @@ static int elan_query_device_info(struct elan_tp_data *data)
if (error)
return error;
+ data->quirks = elan_i2c_lookup_quirks(data->ic_type, data->product_id);
+
error = elan_get_fwinfo(data->ic_type, data->iap_version,
&data->fw_validpage_count,
&data->fw_signature_address,
@@ -546,7 +584,7 @@ static int elan_update_firmware(struct elan_tp_data *data,
data->ops->iap_reset(client);
} else {
/* Reinitialize TP after fw is updated */
- elan_initialize(data);
+ elan_initialize(data, false);
elan_query_device_info(data);
}
@@ -1247,7 +1285,7 @@ static int elan_probe(struct i2c_client *client,
}
/* Initialize the touchpad. */
- error = elan_initialize(data);
+ error = elan_initialize(data, false);
if (error)
return error;
@@ -1384,7 +1422,7 @@ static int __maybe_unused elan_resume(struct device *dev)
goto err;
}
- error = elan_initialize(data);
+ error = elan_initialize(data, data->quirks & ETP_QUIRK_QUICK_WAKEUP);
if (error)
dev_err(dev, "initialize when resuming failed: %d\n", error);
diff --git a/drivers/input/serio/apbps2.c b/drivers/input/serio/apbps2.c
index 594ac4e6f8ea..974d7bfae0a0 100644
--- a/drivers/input/serio/apbps2.c
+++ b/drivers/input/serio/apbps2.c
@@ -103,7 +103,6 @@ static int apbps2_open(struct serio *io)
{
struct apbps2_priv *priv = io->port_data;
int limit;
- unsigned long tmp;
/* clear error flags */
iowrite32be(0, &priv->regs->status);
@@ -111,7 +110,7 @@ static int apbps2_open(struct serio *io)
/* Clear old data if available (unlikely) */
limit = 1024;
while ((ioread32be(&priv->regs->status) & APBPS2_STATUS_DR) && --limit)
- tmp = ioread32be(&priv->regs->data);
+ ioread32be(&priv->regs->data);
/* Enable reciever and it's interrupt */
iowrite32be(APBPS2_CTRL_RE | APBPS2_CTRL_RI, &priv->regs->ctrl);
diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen.c
index 97342e14b4f1..dd18cb917c4d 100644
--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Generic DT helper functions for touchscreen devices
+ * Generic helper functions for touchscreens and other two-dimensional
+ * pointing devices
*
* Copyright (c) 2014 Sebastian Reichel <sre@kernel.org>
*/
@@ -37,7 +38,7 @@ static void touchscreen_set_params(struct input_dev *dev,
if (!test_bit(axis, dev->absbit)) {
dev_warn(&dev->dev,
- "DT specifies parameters but the axis %lu is not set up\n",
+ "Parameters are specified but the axis %lu is not set up\n",
axis);
return;
}
@@ -49,7 +50,7 @@ static void touchscreen_set_params(struct input_dev *dev,
}
/**
- * touchscreen_parse_properties - parse common touchscreen DT properties
+ * touchscreen_parse_properties - parse common touchscreen properties
* @input: input device that should be parsed
* @multitouch: specifies whether parsed properties should be applied to
* single-touch or multi-touch axes
@@ -57,9 +58,9 @@ static void touchscreen_set_params(struct input_dev *dev,
* axis swap and invert info for use with touchscreen_report_x_y();
* or %NULL
*
- * This function parses common DT properties for touchscreens and setups the
+ * This function parses common properties for touchscreens and sets up the
* input device accordingly. The function keeps previously set up default
- * values if no value is specified via DT.
+ * values if no value is specified.
*/
void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
struct touchscreen_properties *prop)
@@ -203,4 +204,4 @@ void touchscreen_report_pos(struct input_dev *input,
EXPORT_SYMBOL(touchscreen_report_pos);
MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Device-tree helpers functions for touchscreen devices");
+MODULE_DESCRIPTION("Helper functions for touchscreens and other devices");
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 529614d364fe..ad454cd2855a 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -12,10 +12,6 @@ menuconfig INPUT_TOUCHSCREEN
if INPUT_TOUCHSCREEN
-config TOUCHSCREEN_PROPERTIES
- def_tristate INPUT
- depends on INPUT
-
config TOUCHSCREEN_88PM860X
tristate "Marvell 88PM860x touchscreen"
depends on MFD_88PM860X
@@ -415,6 +411,17 @@ config TOUCHSCREEN_HIDEEP
To compile this driver as a module, choose M here : the
module will be called hideep_ts.
+config TOUCHSCREEN_HYCON_HY46XX
+ tristate "Hycon hy46xx touchscreen support"
+ depends on I2C
+ help
+ Say Y here if you have a touchscreen using Hycon hy46xx
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hycon-hy46xx.
+
config TOUCHSCREEN_ILI210X
tristate "Ilitek ILI210X based touchscreen"
depends on I2C
@@ -430,6 +437,18 @@ config TOUCHSCREEN_ILI210X
To compile this driver as a module, choose M here: the
module will be called ili210x.
+config TOUCHSCREEN_ILITEK
+ tristate "Ilitek I2C 213X/23XX/25XX/Lego Series Touch ICs"
+ depends on I2C
+ help
+ Say Y here if you have touchscreen with ILITEK touch IC,
+ it supports 213X/23XX/25XX and other Lego series.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ilitek_ts_i2c.
+
config TOUCHSCREEN_IPROC
tristate "IPROC touch panel driver support"
depends on ARCH_BCM_IPROC || COMPILE_TEST
@@ -594,6 +613,18 @@ config TOUCHSCREEN_MELFAS_MIP4
To compile this driver as a module, choose M here:
the module will be called melfas_mip4.
+config TOUCHSCREEN_MSG2638
+ tristate "MStar msg2638 touchscreen support"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y here if you have an I2C touchscreen using MStar msg2638.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called msg2638.
+
config TOUCHSCREEN_MTOUCH
tristate "MicroTouch serial touchscreens"
select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 6233541e9173..7d34100f7f22 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -7,7 +7,6 @@
wm97xx-ts-y := wm97xx-core.o
-obj-$(CONFIG_TOUCHSCREEN_PROPERTIES) += of_touchscreen.o
obj-$(CONFIG_TOUCHSCREEN_88PM860X) += 88pm860x-ts.o
obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o
obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o
@@ -35,6 +34,7 @@ obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o
obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o
obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06) += edt-ft5x06.o
obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o
+obj-$(CONFIG_TOUCHSCREEN_HYCON_HY46XX) += hycon-hy46xx.o
obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o
obj-$(CONFIG_TOUCHSCREEN_EKTF2127) += ektf2127.o
@@ -47,6 +47,7 @@ obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o
obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
+obj-$(CONFIG_TOUCHSCREEN_ILITEK) += ilitek_ts_i2c.o
obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o
@@ -59,6 +60,7 @@ obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o
obj-$(CONFIG_TOUCHSCREEN_MELFAS_MIP4) += melfas_mip4.o
obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o
obj-$(CONFIG_TOUCHSCREEN_MMS114) += mms114.o
+obj-$(CONFIG_TOUCHSCREEN_MSG2638) += msg2638.o
obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c
index c0d5c2413356..dc6a85362a40 100644
--- a/drivers/input/touchscreen/ar1021_i2c.c
+++ b/drivers/input/touchscreen/ar1021_i2c.c
@@ -125,7 +125,7 @@ static int ar1021_i2c_probe(struct i2c_client *client,
error = devm_request_threaded_irq(&client->dev, client->irq,
NULL, ar1021_i2c_irq,
- IRQF_ONESHOT,
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
"ar1021_i2c", ar1021);
if (error) {
dev_err(&client->dev,
@@ -133,9 +133,6 @@ static int ar1021_i2c_probe(struct i2c_client *client,
return error;
}
- /* Disable the IRQ, we'll enable it in ar1021_i2c_open() */
- disable_irq(client->irq);
-
error = input_register_device(ar1021->input);
if (error) {
dev_err(&client->dev,
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 383a848eb601..05de92c0293b 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -31,6 +31,7 @@
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-v4l2.h>
#include <media/videobuf2-vmalloc.h>
+#include <dt-bindings/input/atmel-maxtouch.h>
/* Firmware files */
#define MXT_FW_NAME "maxtouch.fw"
@@ -199,6 +200,7 @@ enum t100_type {
#define MXT_CRC_TIMEOUT 1000 /* msec */
#define MXT_FW_RESET_TIME 3000 /* msec */
#define MXT_FW_CHG_TIMEOUT 300 /* msec */
+#define MXT_WAKEUP_TIME 25 /* msec */
/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
@@ -312,6 +314,7 @@ struct mxt_data {
struct mxt_dbg dbg;
struct regulator_bulk_data regulators[2];
struct gpio_desc *reset_gpio;
+ struct gpio_desc *wake_gpio;
bool use_retrigen_workaround;
/* Cached parameters from object table */
@@ -342,6 +345,8 @@ struct mxt_data {
unsigned int t19_num_keys;
enum mxt_suspend_mode suspend_mode;
+
+ u32 wakeup_method;
};
struct mxt_vb2_buffer {
@@ -621,10 +626,42 @@ static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock)
return mxt_bootloader_write(data, buf, sizeof(buf));
}
+static bool mxt_wakeup_toggle(struct i2c_client *client,
+ bool wake_up, bool in_i2c)
+{
+ struct mxt_data *data = i2c_get_clientdata(client);
+
+ switch (data->wakeup_method) {
+ case ATMEL_MXT_WAKEUP_I2C_SCL:
+ if (!in_i2c)
+ return false;
+ break;
+
+ case ATMEL_MXT_WAKEUP_GPIO:
+ if (in_i2c)
+ return false;
+
+ gpiod_set_value(data->wake_gpio, wake_up);
+ break;
+
+ default:
+ return false;
+ }
+
+ if (wake_up) {
+ dev_dbg(&client->dev, "waking up controller\n");
+
+ msleep(MXT_WAKEUP_TIME);
+ }
+
+ return true;
+}
+
static int __mxt_read_reg(struct i2c_client *client,
u16 reg, u16 len, void *val)
{
struct i2c_msg xfer[2];
+ bool retried = false;
u8 buf[2];
int ret;
@@ -643,9 +680,13 @@ static int __mxt_read_reg(struct i2c_client *client,
xfer[1].len = len;
xfer[1].buf = val;
+retry:
ret = i2c_transfer(client->adapter, xfer, 2);
if (ret == 2) {
ret = 0;
+ } else if (!retried && mxt_wakeup_toggle(client, true, true)) {
+ retried = true;
+ goto retry;
} else {
if (ret >= 0)
ret = -EIO;
@@ -659,6 +700,7 @@ static int __mxt_read_reg(struct i2c_client *client,
static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
const void *val)
{
+ bool retried = false;
u8 *buf;
size_t count;
int ret;
@@ -672,9 +714,13 @@ static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
buf[1] = (reg >> 8) & 0xff;
memcpy(&buf[2], val, len);
+retry:
ret = i2c_master_send(client, buf, count);
if (ret == count) {
ret = 0;
+ } else if (!retried && mxt_wakeup_toggle(client, true, true)) {
+ retried = true;
+ goto retry;
} else {
if (ret >= 0)
ret = -EIO;
@@ -2975,6 +3021,8 @@ static const struct attribute_group mxt_attr_group = {
static void mxt_start(struct mxt_data *data)
{
+ mxt_wakeup_toggle(data->client, true, false);
+
switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
mxt_soft_reset(data);
@@ -3009,6 +3057,8 @@ static void mxt_stop(struct mxt_data *data)
mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
break;
}
+
+ mxt_wakeup_toggle(data->client, false, false);
}
static int mxt_input_open(struct input_dev *dev)
@@ -3155,16 +3205,24 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return error;
}
+ /* Request the WAKE line as asserted so we go out of sleep */
+ data->wake_gpio = devm_gpiod_get_optional(&client->dev,
+ "wake", GPIOD_OUT_HIGH);
+ if (IS_ERR(data->wake_gpio)) {
+ error = PTR_ERR(data->wake_gpio);
+ dev_err(&client->dev, "Failed to get wake gpio: %d\n", error);
+ return error;
+ }
+
error = devm_request_threaded_irq(&client->dev, client->irq,
- NULL, mxt_interrupt, IRQF_ONESHOT,
+ NULL, mxt_interrupt,
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
client->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
return error;
}
- disable_irq(client->irq);
-
error = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
data->regulators);
if (error) {
@@ -3185,6 +3243,25 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
msleep(MXT_RESET_INVALID_CHG);
}
+ /*
+ * Controllers like mXT1386 have a dedicated WAKE line that could be
+ * connected to a GPIO or to I2C SCL pin, or permanently asserted low.
+ *
+ * This WAKE line is used for waking controller from a deep-sleep and
+ * it needs to be asserted low for 25 milliseconds before I2C transfers
+ * could be accepted by controller if it was in a deep-sleep mode.
+ * Controller will go into sleep automatically after 2 seconds of
+ * inactivity if WAKE line is deasserted and deep sleep is activated.
+ *
+ * If WAKE line is connected to I2C SCL pin, then the first I2C transfer
+ * will get an instant NAK and transfer needs to be retried after 25ms.
+ *
+ * If WAKE line is connected to a GPIO line, the line must be asserted
+ * 25ms before the host attempts to communicate with the controller.
+ */
+ device_property_read_u32(&client->dev, "atmel,wakeup-method",
+ &data->wakeup_method);
+
error = mxt_initialize(data);
if (error)
goto err_disable_regulators;
diff --git a/drivers/input/touchscreen/bu21029_ts.c b/drivers/input/touchscreen/bu21029_ts.c
index 341925edb8e6..392950aa7856 100644
--- a/drivers/input/touchscreen/bu21029_ts.c
+++ b/drivers/input/touchscreen/bu21029_ts.c
@@ -401,10 +401,10 @@ static int bu21029_probe(struct i2c_client *client,
input_set_drvdata(in_dev, bu21029);
- irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
error = devm_request_threaded_irq(&client->dev, client->irq,
NULL, bu21029_touch_soft_irq,
- IRQF_ONESHOT, DRIVER_NAME, bu21029);
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
+ DRIVER_NAME, bu21029);
if (error) {
dev_err(&client->dev,
"unable to request touch irq: %d\n", error);
diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c
index 73c854f35f33..106dd4962785 100644
--- a/drivers/input/touchscreen/cyttsp_core.c
+++ b/drivers/input/touchscreen/cyttsp_core.c
@@ -229,16 +229,21 @@ static int cyttsp_set_sysinfo_regs(struct cyttsp *ts)
static void cyttsp_hard_reset(struct cyttsp *ts)
{
if (ts->reset_gpio) {
+ /*
+ * According to the CY8CTMA340 datasheet page 21, the external
+ * reset pulse width should be >= 1 ms. The datasheet does not
+ * specify how long we have to wait after reset but a vendor
+ * tree specifies 5 ms here.
+ */
gpiod_set_value_cansleep(ts->reset_gpio, 1);
- msleep(CY_DELAY_DFLT);
+ usleep_range(1000, 2000);
gpiod_set_value_cansleep(ts->reset_gpio, 0);
- msleep(CY_DELAY_DFLT);
+ usleep_range(5000, 6000);
}
}
static int cyttsp_soft_reset(struct cyttsp *ts)
{
- unsigned long timeout;
int retval;
/* wait for interrupt to set ready completion */
@@ -248,12 +253,16 @@ static int cyttsp_soft_reset(struct cyttsp *ts)
enable_irq(ts->irq);
retval = ttsp_send_command(ts, CY_SOFT_RESET_MODE);
- if (retval)
+ if (retval) {
+ dev_err(ts->dev, "failed to send soft reset\n");
goto out;
+ }
- timeout = wait_for_completion_timeout(&ts->bl_ready,
- msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX));
- retval = timeout ? 0 : -EIO;
+ if (!wait_for_completion_timeout(&ts->bl_ready,
+ msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX))) {
+ dev_err(ts->dev, "timeout waiting for soft reset\n");
+ retval = -EIO;
+ }
out:
ts->state = CY_IDLE_STATE;
@@ -405,8 +414,10 @@ static int cyttsp_power_on(struct cyttsp *ts)
if (GET_BOOTLOADERMODE(ts->bl_data.bl_status) &&
IS_VALID_APP(ts->bl_data.bl_status)) {
error = cyttsp_exit_bl_mode(ts);
- if (error)
+ if (error) {
+ dev_err(ts->dev, "failed to exit bootloader mode\n");
return error;
+ }
}
if (GET_HSTMODE(ts->bl_data.bl_file) != CY_OPERATE_MODE ||
@@ -629,10 +640,8 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
return ERR_PTR(error);
init_completion(&ts->bl_ready);
- snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
input_dev->name = "Cypress TTSP TouchScreen";
- input_dev->phys = ts->phys;
input_dev->id.bustype = bus_ops->bustype;
input_dev->dev.parent = ts->dev;
@@ -643,16 +652,20 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
+ /* One byte for width 0..255 so this is the limit */
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
touchscreen_parse_properties(input_dev, true, NULL);
- error = input_mt_init_slots(input_dev, CY_MAX_ID, 0);
+ error = input_mt_init_slots(input_dev, CY_MAX_ID, INPUT_MT_DIRECT);
if (error) {
dev_err(dev, "Unable to init MT slots.\n");
return ERR_PTR(error);
}
error = devm_request_threaded_irq(dev, ts->irq, NULL, cyttsp_irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
+ IRQF_NO_AUTOEN,
"cyttsp", ts);
if (error) {
dev_err(ts->dev, "failed to request IRQ %d, err: %d\n",
@@ -660,8 +673,6 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
return ERR_PTR(error);
}
- disable_irq(ts->irq);
-
cyttsp_hard_reset(ts);
error = cyttsp_power_on(ts);
diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h
index 8c651336ac12..9bc4fe7e6ac5 100644
--- a/drivers/input/touchscreen/cyttsp_core.h
+++ b/drivers/input/touchscreen/cyttsp_core.h
@@ -114,7 +114,6 @@ struct cyttsp {
struct device *dev;
int irq;
struct input_dev *input;
- char phys[32];
const struct cyttsp_bus_ops *bus_ops;
struct cyttsp_bootloader_data bl_data;
struct cyttsp_sysinfo_data sysinfo_data;
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 5f7706febcb0..17540bdb1eaf 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -38,6 +38,7 @@
#include <linux/of.h>
#include <linux/gpio/consumer.h>
#include <linux/regulator/consumer.h>
+#include <linux/uuid.h>
#include <asm/unaligned.h>
/* Device, Driver information */
@@ -1334,6 +1335,40 @@ static void elants_i2c_power_off(void *_data)
}
}
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id i2c_hid_ids[] = {
+ {"ACPI0C50", 0 },
+ {"PNP0C50", 0 },
+ { },
+};
+
+static const guid_t i2c_hid_guid =
+ GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555,
+ 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE);
+
+static bool elants_acpi_is_hid_device(struct device *dev)
+{
+ acpi_handle handle = ACPI_HANDLE(dev);
+ union acpi_object *obj;
+
+ if (acpi_match_device_ids(ACPI_COMPANION(dev), i2c_hid_ids))
+ return false;
+
+ obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid, 1, 1, NULL, ACPI_TYPE_INTEGER);
+ if (obj) {
+ ACPI_FREE(obj);
+ return true;
+ }
+
+ return false;
+}
+#else
+static bool elants_acpi_is_hid_device(struct device *dev)
+{
+ return false;
+}
+#endif
+
static int elants_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1342,9 +1377,14 @@ static int elants_i2c_probe(struct i2c_client *client,
unsigned long irqflags;
int error;
+ /* Don't bind to i2c-hid compatible devices, these are handled by the i2c-hid drv. */
+ if (elants_acpi_is_hid_device(&client->dev)) {
+ dev_warn(&client->dev, "This device appears to be an I2C-HID device, not binding\n");
+ return -ENODEV;
+ }
+
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
- dev_err(&client->dev,
- "%s: i2c check functionality error\n", DEVICE_NAME);
+ dev_err(&client->dev, "I2C check functionality error\n");
return -ENXIO;
}
diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
index a6597f026980..cbe0dd412912 100644
--- a/drivers/input/touchscreen/exc3000.c
+++ b/drivers/input/touchscreen/exc3000.c
@@ -25,11 +25,13 @@
#define EXC3000_NUM_SLOTS 10
#define EXC3000_SLOTS_PER_FRAME 5
#define EXC3000_LEN_FRAME 66
+#define EXC3000_LEN_VENDOR_REQUEST 68
#define EXC3000_LEN_POINT 10
#define EXC3000_LEN_MODEL_NAME 16
#define EXC3000_LEN_FW_VERSION 16
+#define EXC3000_VENDOR_EVENT 0x03
#define EXC3000_MT1_EVENT 0x06
#define EXC3000_MT2_EVENT 0x18
@@ -76,9 +78,6 @@ struct exc3000_data {
u8 buf[2 * EXC3000_LEN_FRAME];
struct completion wait_event;
struct mutex query_lock;
- int query_result;
- char model[EXC3000_LEN_MODEL_NAME];
- char fw_version[EXC3000_LEN_FW_VERSION];
};
static void exc3000_report_slots(struct input_dev *input,
@@ -105,15 +104,16 @@ static void exc3000_timer(struct timer_list *t)
input_sync(data->input);
}
+static inline void exc3000_schedule_timer(struct exc3000_data *data)
+{
+ mod_timer(&data->timer, jiffies + msecs_to_jiffies(EXC3000_TIMEOUT_MS));
+}
+
static int exc3000_read_frame(struct exc3000_data *data, u8 *buf)
{
struct i2c_client *client = data->client;
- u8 expected_event = EXC3000_MT1_EVENT;
int ret;
- if (data->info->max_xy == SZ_16K - 1)
- expected_event = EXC3000_MT2_EVENT;
-
ret = i2c_master_send(client, "'", 2);
if (ret < 0)
return ret;
@@ -131,175 +131,196 @@ static int exc3000_read_frame(struct exc3000_data *data, u8 *buf)
if (get_unaligned_le16(buf) != EXC3000_LEN_FRAME)
return -EINVAL;
- if (buf[2] != expected_event)
- return -EINVAL;
-
return 0;
}
-static int exc3000_read_data(struct exc3000_data *data,
- u8 *buf, int *n_slots)
+static int exc3000_handle_mt_event(struct exc3000_data *data)
{
- int error;
-
- error = exc3000_read_frame(data, buf);
- if (error)
- return error;
+ struct input_dev *input = data->input;
+ int ret, total_slots;
+ u8 *buf = data->buf;
- *n_slots = buf[3];
- if (!*n_slots || *n_slots > EXC3000_NUM_SLOTS)
- return -EINVAL;
+ total_slots = buf[3];
+ if (!total_slots || total_slots > EXC3000_NUM_SLOTS) {
+ ret = -EINVAL;
+ goto out_fail;
+ }
- if (*n_slots > EXC3000_SLOTS_PER_FRAME) {
+ if (total_slots > EXC3000_SLOTS_PER_FRAME) {
/* Read 2nd frame to get the rest of the contacts. */
- error = exc3000_read_frame(data, buf + EXC3000_LEN_FRAME);
- if (error)
- return error;
+ ret = exc3000_read_frame(data, buf + EXC3000_LEN_FRAME);
+ if (ret)
+ goto out_fail;
/* 2nd chunk must have number of contacts set to 0. */
- if (buf[EXC3000_LEN_FRAME + 3] != 0)
- return -EINVAL;
+ if (buf[EXC3000_LEN_FRAME + 3] != 0) {
+ ret = -EINVAL;
+ goto out_fail;
+ }
}
- return 0;
-}
-
-static int exc3000_query_interrupt(struct exc3000_data *data)
-{
- u8 *buf = data->buf;
- int error;
+ /*
+ * We read full state successfully, no contacts will be "stuck".
+ */
+ del_timer_sync(&data->timer);
- error = i2c_master_recv(data->client, buf, EXC3000_LEN_FRAME);
- if (error < 0)
- return error;
+ while (total_slots > 0) {
+ int slots = min(total_slots, EXC3000_SLOTS_PER_FRAME);
- if (buf[0] != 'B')
- return -EPROTO;
+ exc3000_report_slots(input, &data->prop, buf + 4, slots);
+ total_slots -= slots;
+ buf += EXC3000_LEN_FRAME;
+ }
- if (buf[4] == 'E')
- strlcpy(data->model, buf + 5, sizeof(data->model));
- else if (buf[4] == 'D')
- strlcpy(data->fw_version, buf + 5, sizeof(data->fw_version));
- else
- return -EPROTO;
+ input_mt_sync_frame(input);
+ input_sync(input);
return 0;
+
+out_fail:
+ /* Schedule a timer to release "stuck" contacts */
+ exc3000_schedule_timer(data);
+
+ return ret;
}
static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
{
struct exc3000_data *data = dev_id;
- struct input_dev *input = data->input;
u8 *buf = data->buf;
- int slots, total_slots;
- int error;
-
- if (mutex_is_locked(&data->query_lock)) {
- data->query_result = exc3000_query_interrupt(data);
- complete(&data->wait_event);
- goto out;
- }
+ int ret;
- error = exc3000_read_data(data, buf, &total_slots);
- if (error) {
+ ret = exc3000_read_frame(data, buf);
+ if (ret) {
/* Schedule a timer to release "stuck" contacts */
- mod_timer(&data->timer,
- jiffies + msecs_to_jiffies(EXC3000_TIMEOUT_MS));
+ exc3000_schedule_timer(data);
goto out;
}
- /*
- * We read full state successfully, no contacts will be "stuck".
- */
- del_timer_sync(&data->timer);
+ switch (buf[2]) {
+ case EXC3000_VENDOR_EVENT:
+ complete(&data->wait_event);
+ break;
- while (total_slots > 0) {
- slots = min(total_slots, EXC3000_SLOTS_PER_FRAME);
- exc3000_report_slots(input, &data->prop, buf + 4, slots);
- total_slots -= slots;
- buf += EXC3000_LEN_FRAME;
- }
+ case EXC3000_MT1_EVENT:
+ case EXC3000_MT2_EVENT:
+ exc3000_handle_mt_event(data);
+ break;
- input_mt_sync_frame(input);
- input_sync(input);
+ default:
+ break;
+ }
out:
return IRQ_HANDLED;
}
-static ssize_t fw_version_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static int exc3000_vendor_data_request(struct exc3000_data *data, u8 *request,
+ u8 request_len, u8 *response, int timeout)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct exc3000_data *data = i2c_get_clientdata(client);
- static const u8 request[68] = {
- 0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'D', 0x00
- };
- int error;
+ u8 buf[EXC3000_LEN_VENDOR_REQUEST] = { 0x67, 0x00, 0x42, 0x00, 0x03 };
+ int ret;
mutex_lock(&data->query_lock);
- data->query_result = -ETIMEDOUT;
reinit_completion(&data->wait_event);
- error = i2c_master_send(client, request, sizeof(request));
- if (error < 0) {
- mutex_unlock(&data->query_lock);
- return error;
+ buf[5] = request_len;
+ memcpy(&buf[6], request, request_len);
+
+ ret = i2c_master_send(data->client, buf, EXC3000_LEN_VENDOR_REQUEST);
+ if (ret < 0)
+ goto out_unlock;
+
+ if (response) {
+ ret = wait_for_completion_timeout(&data->wait_event,
+ timeout * HZ);
+ if (ret <= 0) {
+ ret = -ETIMEDOUT;
+ goto out_unlock;
+ }
+
+ if (data->buf[3] >= EXC3000_LEN_FRAME) {
+ ret = -ENOSPC;
+ goto out_unlock;
+ }
+
+ memcpy(response, &data->buf[4], data->buf[3]);
+ ret = data->buf[3];
}
- wait_for_completion_interruptible_timeout(&data->wait_event, 1 * HZ);
+out_unlock:
mutex_unlock(&data->query_lock);
- if (data->query_result < 0)
- return data->query_result;
-
- return sprintf(buf, "%s\n", data->fw_version);
+ return ret;
}
-static DEVICE_ATTR_RO(fw_version);
-static ssize_t exc3000_get_model(struct exc3000_data *data)
+static ssize_t fw_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- static const u8 request[68] = {
- 0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'E', 0x00
- };
- struct i2c_client *client = data->client;
- int error;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct exc3000_data *data = i2c_get_clientdata(client);
+ u8 response[EXC3000_LEN_FRAME];
+ int ret;
- mutex_lock(&data->query_lock);
- data->query_result = -ETIMEDOUT;
- reinit_completion(&data->wait_event);
+ /* query bootloader info */
+ ret = exc3000_vendor_data_request(data,
+ (u8[]){0x39, 0x02}, 2, response, 1);
+ if (ret < 0)
+ return ret;
- error = i2c_master_send(client, request, sizeof(request));
- if (error < 0) {
- mutex_unlock(&data->query_lock);
- return error;
- }
+ /*
+ * If the bootloader version is non-zero then the device is in
+ * bootloader mode and won't answer a query for the application FW
+ * version, so we just use the bootloader version info.
+ */
+ if (response[2] || response[3])
+ return sprintf(buf, "%d.%d\n", response[2], response[3]);
- wait_for_completion_interruptible_timeout(&data->wait_event, 1 * HZ);
- mutex_unlock(&data->query_lock);
+ ret = exc3000_vendor_data_request(data, (u8[]){'D'}, 1, response, 1);
+ if (ret < 0)
+ return ret;
- return data->query_result;
+ return sprintf(buf, "%s\n", &response[1]);
}
+static DEVICE_ATTR_RO(fw_version);
static ssize_t model_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct exc3000_data *data = i2c_get_clientdata(client);
- int error;
+ u8 response[EXC3000_LEN_FRAME];
+ int ret;
- error = exc3000_get_model(data);
- if (error < 0)
- return error;
+ ret = exc3000_vendor_data_request(data, (u8[]){'E'}, 1, response, 1);
+ if (ret < 0)
+ return ret;
- return sprintf(buf, "%s\n", data->model);
+ return sprintf(buf, "%s\n", &response[1]);
}
static DEVICE_ATTR_RO(model);
+static ssize_t type_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct exc3000_data *data = i2c_get_clientdata(client);
+ u8 response[EXC3000_LEN_FRAME];
+ int ret;
+
+ ret = exc3000_vendor_data_request(data, (u8[]){'F'}, 1, response, 1);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%s\n", &response[1]);
+}
+static DEVICE_ATTR_RO(type);
+
static struct attribute *sysfs_attrs[] = {
&dev_attr_fw_version.attr,
&dev_attr_model.attr,
+ &dev_attr_type.attr,
NULL
};
@@ -379,9 +400,15 @@ static int exc3000_probe(struct i2c_client *client)
* or two touch events anyways).
*/
for (retry = 0; retry < 3; retry++) {
- error = exc3000_get_model(data);
- if (!error)
+ u8 response[EXC3000_LEN_FRAME];
+
+ error = exc3000_vendor_data_request(data, (u8[]){'E'}, 1,
+ response, 1);
+ if (error > 0) {
+ dev_dbg(&client->dev, "TS Model: %s", &response[1]);
+ error = 0;
break;
+ }
dev_warn(&client->dev, "Retry %d get EETI EXC3000 model: %d\n",
retry + 1, error);
}
@@ -389,8 +416,6 @@ static int exc3000_probe(struct i2c_client *client)
if (error)
return error;
- dev_dbg(&client->dev, "TS Model: %s", data->model);
-
i2c_set_clientdata(client, data);
error = devm_device_add_group(&client->dev, &exc3000_attribute_group);
diff --git a/drivers/input/touchscreen/hycon-hy46xx.c b/drivers/input/touchscreen/hycon-hy46xx.c
new file mode 100644
index 000000000000..891d0430083e
--- /dev/null
+++ b/drivers/input/touchscreen/hycon-hy46xx.c
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/irq.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
+
+#include <asm/unaligned.h>
+
+#define HY46XX_CHKSUM_CODE 0x1
+#define HY46XX_FINGER_NUM 0x2
+#define HY46XX_CHKSUM_LEN 0x7
+#define HY46XX_THRESHOLD 0x80
+#define HY46XX_GLOVE_EN 0x84
+#define HY46XX_REPORT_SPEED 0x88
+#define HY46XX_PWR_NOISE_EN 0x89
+#define HY46XX_FILTER_DATA 0x8A
+#define HY46XX_GAIN 0x92
+#define HY46XX_EDGE_OFFSET 0x93
+#define HY46XX_RX_NR_USED 0x94
+#define HY46XX_TX_NR_USED 0x95
+#define HY46XX_PWR_MODE 0xA5
+#define HY46XX_FW_VERSION 0xA6
+#define HY46XX_LIB_VERSION 0xA7
+#define HY46XX_TP_INFO 0xA8
+#define HY46XX_TP_CHIP_ID 0xA9
+#define HY46XX_BOOT_VER 0xB0
+
+#define HY46XX_TPLEN 0x6
+#define HY46XX_REPORT_PKT_LEN 0x44
+
+#define HY46XX_MAX_SUPPORTED_POINTS 11
+
+#define TOUCH_EVENT_DOWN 0x00
+#define TOUCH_EVENT_UP 0x01
+#define TOUCH_EVENT_CONTACT 0x02
+#define TOUCH_EVENT_RESERVED 0x03
+
+struct hycon_hy46xx_data {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct touchscreen_properties prop;
+ struct regulator *vcc;
+
+ struct gpio_desc *reset_gpio;
+
+ struct mutex mutex;
+ struct regmap *regmap;
+
+ int threshold;
+ bool glove_enable;
+ int report_speed;
+ bool noise_filter_enable;
+ int filter_data;
+ int gain;
+ int edge_offset;
+ int rx_number_used;
+ int tx_number_used;
+ int power_mode;
+ int fw_version;
+ int lib_version;
+ int tp_information;
+ int tp_chip_id;
+ int bootloader_version;
+};
+
+static const struct regmap_config hycon_hy46xx_i2c_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static bool hycon_hy46xx_check_checksum(struct hycon_hy46xx_data *tsdata, u8 *buf)
+{
+ u8 chksum = 0;
+ int i;
+
+ for (i = 2; i < buf[HY46XX_CHKSUM_LEN]; i++)
+ chksum += buf[i];
+
+ if (chksum == buf[HY46XX_CHKSUM_CODE])
+ return true;
+
+ dev_err_ratelimited(&tsdata->client->dev,
+ "checksum error: 0x%02x expected, got 0x%02x\n",
+ chksum, buf[HY46XX_CHKSUM_CODE]);
+
+ return false;
+}
+
+static irqreturn_t hycon_hy46xx_isr(int irq, void *dev_id)
+{
+ struct hycon_hy46xx_data *tsdata = dev_id;
+ struct device *dev = &tsdata->client->dev;
+ u8 rdbuf[HY46XX_REPORT_PKT_LEN];
+ int i, x, y, id;
+ int error;
+
+ memset(rdbuf, 0, sizeof(rdbuf));
+
+ error = regmap_bulk_read(tsdata->regmap, 0, rdbuf, sizeof(rdbuf));
+ if (error) {
+ dev_err_ratelimited(dev, "Unable to fetch data, error: %d\n",
+ error);
+ goto out;
+ }
+
+ if (!hycon_hy46xx_check_checksum(tsdata, rdbuf))
+ goto out;
+
+ for (i = 0; i < HY46XX_MAX_SUPPORTED_POINTS; i++) {
+ u8 *buf = &rdbuf[3 + (HY46XX_TPLEN * i)];
+ int type = buf[0] >> 6;
+
+ if (type == TOUCH_EVENT_RESERVED)
+ continue;
+
+ x = get_unaligned_be16(buf) & 0x0fff;
+ y = get_unaligned_be16(buf + 2) & 0x0fff;
+
+ id = buf[2] >> 4;
+
+ input_mt_slot(tsdata->input, id);
+ if (input_mt_report_slot_state(tsdata->input, MT_TOOL_FINGER,
+ type != TOUCH_EVENT_UP))
+ touchscreen_report_pos(tsdata->input, &tsdata->prop,
+ x, y, true);
+ }
+
+ input_mt_report_pointer_emulation(tsdata->input, false);
+ input_sync(tsdata->input);
+
+out:
+ return IRQ_HANDLED;
+}
+
+struct hycon_hy46xx_attribute {
+ struct device_attribute dattr;
+ size_t field_offset;
+ u8 address;
+ u8 limit_low;
+ u8 limit_high;
+};
+
+#define HYCON_ATTR_U8(_field, _mode, _address, _limit_low, _limit_high) \
+ struct hycon_hy46xx_attribute hycon_hy46xx_attr_##_field = { \
+ .dattr = __ATTR(_field, _mode, \
+ hycon_hy46xx_setting_show, \
+ hycon_hy46xx_setting_store), \
+ .field_offset = offsetof(struct hycon_hy46xx_data, _field), \
+ .address = _address, \
+ .limit_low = _limit_low, \
+ .limit_high = _limit_high, \
+ }
+
+#define HYCON_ATTR_BOOL(_field, _mode, _address) \
+ struct hycon_hy46xx_attribute hycon_hy46xx_attr_##_field = { \
+ .dattr = __ATTR(_field, _mode, \
+ hycon_hy46xx_setting_show, \
+ hycon_hy46xx_setting_store), \
+ .field_offset = offsetof(struct hycon_hy46xx_data, _field), \
+ .address = _address, \
+ .limit_low = false, \
+ .limit_high = true, \
+ }
+
+static ssize_t hycon_hy46xx_setting_show(struct device *dev,
+ struct device_attribute *dattr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct hycon_hy46xx_data *tsdata = i2c_get_clientdata(client);
+ struct hycon_hy46xx_attribute *attr =
+ container_of(dattr, struct hycon_hy46xx_attribute, dattr);
+ u8 *field = (u8 *)tsdata + attr->field_offset;
+ size_t count = 0;
+ int error = 0;
+ int val;
+
+ mutex_lock(&tsdata->mutex);
+
+ error = regmap_read(tsdata->regmap, attr->address, &val);
+ if (error < 0) {
+ dev_err(&tsdata->client->dev,
+ "Failed to fetch attribute %s, error %d\n",
+ dattr->attr.name, error);
+ goto out;
+ }
+
+ if (val != *field) {
+ dev_warn(&tsdata->client->dev,
+ "%s: read (%d) and stored value (%d) differ\n",
+ dattr->attr.name, val, *field);
+ *field = val;
+ }
+
+ count = scnprintf(buf, PAGE_SIZE, "%d\n", val);
+
+out:
+ mutex_unlock(&tsdata->mutex);
+ return error ?: count;
+}
+
+static ssize_t hycon_hy46xx_setting_store(struct device *dev,
+ struct device_attribute *dattr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct hycon_hy46xx_data *tsdata = i2c_get_clientdata(client);
+ struct hycon_hy46xx_attribute *attr =
+ container_of(dattr, struct hycon_hy46xx_attribute, dattr);
+ u8 *field = (u8 *)tsdata + attr->field_offset;
+ unsigned int val;
+ int error;
+
+ mutex_lock(&tsdata->mutex);
+
+ error = kstrtouint(buf, 0, &val);
+ if (error)
+ goto out;
+
+ if (val < attr->limit_low || val > attr->limit_high) {
+ error = -ERANGE;
+ goto out;
+ }
+
+ error = regmap_write(tsdata->regmap, attr->address, val);
+ if (error < 0) {
+ dev_err(&tsdata->client->dev,
+ "Failed to update attribute %s, error: %d\n",
+ dattr->attr.name, error);
+ goto out;
+ }
+ *field = val;
+
+out:
+ mutex_unlock(&tsdata->mutex);
+ return error ?: count;
+}
+
+static HYCON_ATTR_U8(threshold, 0644, HY46XX_THRESHOLD, 0, 255);
+static HYCON_ATTR_BOOL(glove_enable, 0644, HY46XX_GLOVE_EN);
+static HYCON_ATTR_U8(report_speed, 0644, HY46XX_REPORT_SPEED, 0, 255);
+static HYCON_ATTR_BOOL(noise_filter_enable, 0644, HY46XX_PWR_NOISE_EN);
+static HYCON_ATTR_U8(filter_data, 0644, HY46XX_FILTER_DATA, 0, 5);
+static HYCON_ATTR_U8(gain, 0644, HY46XX_GAIN, 0, 5);
+static HYCON_ATTR_U8(edge_offset, 0644, HY46XX_EDGE_OFFSET, 0, 5);
+static HYCON_ATTR_U8(fw_version, 0444, HY46XX_FW_VERSION, 0, 255);
+static HYCON_ATTR_U8(lib_version, 0444, HY46XX_LIB_VERSION, 0, 255);
+static HYCON_ATTR_U8(tp_information, 0444, HY46XX_TP_INFO, 0, 255);
+static HYCON_ATTR_U8(tp_chip_id, 0444, HY46XX_TP_CHIP_ID, 0, 255);
+static HYCON_ATTR_U8(bootloader_version, 0444, HY46XX_BOOT_VER, 0, 255);
+
+static struct attribute *hycon_hy46xx_attrs[] = {
+ &hycon_hy46xx_attr_threshold.dattr.attr,
+ &hycon_hy46xx_attr_glove_enable.dattr.attr,
+ &hycon_hy46xx_attr_report_speed.dattr.attr,
+ &hycon_hy46xx_attr_noise_filter_enable.dattr.attr,
+ &hycon_hy46xx_attr_filter_data.dattr.attr,
+ &hycon_hy46xx_attr_gain.dattr.attr,
+ &hycon_hy46xx_attr_edge_offset.dattr.attr,
+ &hycon_hy46xx_attr_fw_version.dattr.attr,
+ &hycon_hy46xx_attr_lib_version.dattr.attr,
+ &hycon_hy46xx_attr_tp_information.dattr.attr,
+ &hycon_hy46xx_attr_tp_chip_id.dattr.attr,
+ &hycon_hy46xx_attr_bootloader_version.dattr.attr,
+ NULL
+};
+
+static const struct attribute_group hycon_hy46xx_attr_group = {
+ .attrs = hycon_hy46xx_attrs,
+};
+
+static void hycon_hy46xx_get_defaults(struct device *dev, struct hycon_hy46xx_data *tsdata)
+{
+ bool val_bool;
+ int error;
+ u32 val;
+
+ error = device_property_read_u32(dev, "hycon,threshold", &val);
+ if (!error) {
+ error = regmap_write(tsdata->regmap, HY46XX_THRESHOLD, val);
+ if (error < 0)
+ goto out;
+
+ tsdata->threshold = val;
+ }
+
+ val_bool = device_property_read_bool(dev, "hycon,glove-enable");
+ error = regmap_write(tsdata->regmap, HY46XX_GLOVE_EN, val_bool);
+ if (error < 0)
+ goto out;
+ tsdata->glove_enable = val_bool;
+
+ error = device_property_read_u32(dev, "hycon,report-speed-hz", &val);
+ if (!error) {
+ error = regmap_write(tsdata->regmap, HY46XX_REPORT_SPEED, val);
+ if (error < 0)
+ goto out;
+
+ tsdata->report_speed = val;
+ }
+
+ val_bool = device_property_read_bool(dev, "hycon,noise-filter-enable");
+ error = regmap_write(tsdata->regmap, HY46XX_PWR_NOISE_EN, val_bool);
+ if (error < 0)
+ goto out;
+ tsdata->noise_filter_enable = val_bool;
+
+ error = device_property_read_u32(dev, "hycon,filter-data", &val);
+ if (!error) {
+ error = regmap_write(tsdata->regmap, HY46XX_FILTER_DATA, val);
+ if (error < 0)
+ goto out;
+
+ tsdata->filter_data = val;
+ }
+
+ error = device_property_read_u32(dev, "hycon,gain", &val);
+ if (!error) {
+ error = regmap_write(tsdata->regmap, HY46XX_GAIN, val);
+ if (error < 0)
+ goto out;
+
+ tsdata->gain = val;
+ }
+
+ error = device_property_read_u32(dev, "hycon,edge-offset", &val);
+ if (!error) {
+ error = regmap_write(tsdata->regmap, HY46XX_EDGE_OFFSET, val);
+ if (error < 0)
+ goto out;
+
+ tsdata->edge_offset = val;
+ }
+
+ return;
+out:
+ dev_err(&tsdata->client->dev, "Failed to set default settings");
+}
+
+static void hycon_hy46xx_get_parameters(struct hycon_hy46xx_data *tsdata)
+{
+ int error;
+ u32 val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_THRESHOLD, &val);
+ if (error < 0)
+ goto out;
+ tsdata->threshold = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_GLOVE_EN, &val);
+ if (error < 0)
+ goto out;
+ tsdata->glove_enable = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_REPORT_SPEED, &val);
+ if (error < 0)
+ goto out;
+ tsdata->report_speed = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_PWR_NOISE_EN, &val);
+ if (error < 0)
+ goto out;
+ tsdata->noise_filter_enable = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_FILTER_DATA, &val);
+ if (error < 0)
+ goto out;
+ tsdata->filter_data = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_GAIN, &val);
+ if (error < 0)
+ goto out;
+ tsdata->gain = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_EDGE_OFFSET, &val);
+ if (error < 0)
+ goto out;
+ tsdata->edge_offset = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_RX_NR_USED, &val);
+ if (error < 0)
+ goto out;
+ tsdata->rx_number_used = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_TX_NR_USED, &val);
+ if (error < 0)
+ goto out;
+ tsdata->tx_number_used = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_PWR_MODE, &val);
+ if (error < 0)
+ goto out;
+ tsdata->power_mode = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_FW_VERSION, &val);
+ if (error < 0)
+ goto out;
+ tsdata->fw_version = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_LIB_VERSION, &val);
+ if (error < 0)
+ goto out;
+ tsdata->lib_version = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_TP_INFO, &val);
+ if (error < 0)
+ goto out;
+ tsdata->tp_information = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_TP_CHIP_ID, &val);
+ if (error < 0)
+ goto out;
+ tsdata->tp_chip_id = val;
+
+ error = regmap_read(tsdata->regmap, HY46XX_BOOT_VER, &val);
+ if (error < 0)
+ goto out;
+ tsdata->bootloader_version = val;
+
+ return;
+out:
+ dev_err(&tsdata->client->dev, "Failed to read default settings");
+}
+
+static void hycon_hy46xx_disable_regulator(void *arg)
+{
+ struct hycon_hy46xx_data *data = arg;
+
+ regulator_disable(data->vcc);
+}
+
+static int hycon_hy46xx_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct hycon_hy46xx_data *tsdata;
+ struct input_dev *input;
+ int error;
+
+ dev_dbg(&client->dev, "probing for HYCON HY46XX I2C\n");
+
+ tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL);
+ if (!tsdata)
+ return -ENOMEM;
+
+ tsdata->vcc = devm_regulator_get(&client->dev, "vcc");
+ if (IS_ERR(tsdata->vcc)) {
+ error = PTR_ERR(tsdata->vcc);
+ if (error != -EPROBE_DEFER)
+ dev_err(&client->dev,
+ "failed to request regulator: %d\n", error);
+ return error;
+ }
+
+ error = regulator_enable(tsdata->vcc);
+ if (error < 0) {
+ dev_err(&client->dev, "failed to enable vcc: %d\n", error);
+ return error;
+ }
+
+ error = devm_add_action_or_reset(&client->dev,
+ hycon_hy46xx_disable_regulator,
+ tsdata);
+ if (error)
+ return error;
+
+ tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev,
+ "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(tsdata->reset_gpio)) {
+ error = PTR_ERR(tsdata->reset_gpio);
+ dev_err(&client->dev,
+ "Failed to request GPIO reset pin, error %d\n", error);
+ return error;
+ }
+
+ if (tsdata->reset_gpio) {
+ usleep_range(5000, 6000);
+ gpiod_set_value_cansleep(tsdata->reset_gpio, 1);
+ usleep_range(5000, 6000);
+ gpiod_set_value_cansleep(tsdata->reset_gpio, 0);
+ msleep(1000);
+ }
+
+ input = devm_input_allocate_device(&client->dev);
+ if (!input) {
+ dev_err(&client->dev, "failed to allocate input device.\n");
+ return -ENOMEM;
+ }
+
+ mutex_init(&tsdata->mutex);
+ tsdata->client = client;
+ tsdata->input = input;
+
+ tsdata->regmap = devm_regmap_init_i2c(client,
+ &hycon_hy46xx_i2c_regmap_config);
+ if (IS_ERR(tsdata->regmap)) {
+ dev_err(&client->dev, "regmap allocation failed\n");
+ return PTR_ERR(tsdata->regmap);
+ }
+
+ hycon_hy46xx_get_defaults(&client->dev, tsdata);
+ hycon_hy46xx_get_parameters(tsdata);
+
+ input->name = "Hycon Capacitive Touch";
+ input->id.bustype = BUS_I2C;
+ input->dev.parent = &client->dev;
+
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, -1, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, -1, 0, 0);
+
+ touchscreen_parse_properties(input, true, &tsdata->prop);
+
+ error = input_mt_init_slots(input, HY46XX_MAX_SUPPORTED_POINTS,
+ INPUT_MT_DIRECT);
+ if (error) {
+ dev_err(&client->dev, "Unable to init MT slots.\n");
+ return error;
+ }
+
+ i2c_set_clientdata(client, tsdata);
+
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, hycon_hy46xx_isr, IRQF_ONESHOT,
+ client->name, tsdata);
+ if (error) {
+ dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
+ return error;
+ }
+
+ error = devm_device_add_group(&client->dev, &hycon_hy46xx_attr_group);
+ if (error)
+ return error;
+
+ error = input_register_device(input);
+ if (error)
+ return error;
+
+ dev_dbg(&client->dev,
+ "HYCON HY46XX initialized: IRQ %d, Reset pin %d.\n",
+ client->irq,
+ tsdata->reset_gpio ? desc_to_gpio(tsdata->reset_gpio) : -1);
+
+ return 0;
+}
+
+static const struct i2c_device_id hycon_hy46xx_id[] = {
+ { .name = "hy4613" },
+ { .name = "hy4614" },
+ { .name = "hy4621" },
+ { .name = "hy4623" },
+ { .name = "hy4633" },
+ { .name = "hy4635" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, hycon_hy46xx_id);
+
+static const struct of_device_id hycon_hy46xx_of_match[] = {
+ { .compatible = "hycon,hy4613" },
+ { .compatible = "hycon,hy4614" },
+ { .compatible = "hycon,hy4621" },
+ { .compatible = "hycon,hy4623" },
+ { .compatible = "hycon,hy4633" },
+ { .compatible = "hycon,hy4635" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, hycon_hy46xx_of_match);
+
+static struct i2c_driver hycon_hy46xx_driver = {
+ .driver = {
+ .name = "hycon_hy46xx",
+ .of_match_table = hycon_hy46xx_of_match,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ },
+ .id_table = hycon_hy46xx_id,
+ .probe = hycon_hy46xx_probe,
+};
+
+module_i2c_driver(hycon_hy46xx_driver);
+
+MODULE_AUTHOR("Giulio Benetti <giulio.benetti@benettiengineering.com>");
+MODULE_DESCRIPTION("HYCON HY46XX I2C Touchscreen Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
index d8fccf048bf4..30576a5f2f04 100644
--- a/drivers/input/touchscreen/ili210x.c
+++ b/drivers/input/touchscreen/ili210x.c
@@ -87,7 +87,7 @@ static bool ili210x_touchdata_to_coords(const u8 *touchdata,
unsigned int *x, unsigned int *y,
unsigned int *z)
{
- if (touchdata[0] & BIT(finger))
+ if (!(touchdata[0] & BIT(finger)))
return false;
*x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0);
diff --git a/drivers/input/touchscreen/ilitek_ts_i2c.c b/drivers/input/touchscreen/ilitek_ts_i2c.c
new file mode 100644
index 000000000000..c5d259c76adc
--- /dev/null
+++ b/drivers/input/touchscreen/ilitek_ts_i2c.c
@@ -0,0 +1,690 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ILITEK Touch IC driver for 23XX, 25XX and Lego series
+ *
+ * Copyright (C) 2011 ILI Technology Corporation.
+ * Copyright (C) 2020 Luca Hsu <luca_hsu@ilitek.com>
+ * Copyright (C) 2021 Joe Hung <joe_hung@ilitek.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/errno.h>
+#include <linux/acpi.h>
+#include <linux/input/touchscreen.h>
+#include <asm/unaligned.h>
+
+
+#define ILITEK_TS_NAME "ilitek_ts"
+#define BL_V1_8 0x108
+#define BL_V1_7 0x107
+#define BL_V1_6 0x106
+
+#define ILITEK_TP_CMD_GET_TP_RES 0x20
+#define ILITEK_TP_CMD_GET_SCRN_RES 0x21
+#define ILITEK_TP_CMD_SET_IC_SLEEP 0x30
+#define ILITEK_TP_CMD_SET_IC_WAKE 0x31
+#define ILITEK_TP_CMD_GET_FW_VER 0x40
+#define ILITEK_TP_CMD_GET_PRL_VER 0x42
+#define ILITEK_TP_CMD_GET_MCU_VER 0x61
+#define ILITEK_TP_CMD_GET_IC_MODE 0xC0
+
+#define REPORT_COUNT_ADDRESS 61
+#define ILITEK_SUPPORT_MAX_POINT 40
+
+struct ilitek_protocol_info {
+ u16 ver;
+ u8 ver_major;
+};
+
+struct ilitek_ts_data {
+ struct i2c_client *client;
+ struct gpio_desc *reset_gpio;
+ struct input_dev *input_dev;
+ struct touchscreen_properties prop;
+
+ const struct ilitek_protocol_map *ptl_cb_func;
+ struct ilitek_protocol_info ptl;
+
+ char product_id[30];
+ u16 mcu_ver;
+ u8 ic_mode;
+ u8 firmware_ver[8];
+
+ s32 reset_time;
+ s32 screen_max_x;
+ s32 screen_max_y;
+ s32 screen_min_x;
+ s32 screen_min_y;
+ s32 max_tp;
+};
+
+struct ilitek_protocol_map {
+ u16 cmd;
+ const char *name;
+ int (*func)(struct ilitek_ts_data *ts, u16 cmd, u8 *inbuf, u8 *outbuf);
+};
+
+enum ilitek_cmds {
+ /* common cmds */
+ GET_PTL_VER = 0,
+ GET_FW_VER,
+ GET_SCRN_RES,
+ GET_TP_RES,
+ GET_IC_MODE,
+ GET_MCU_VER,
+ SET_IC_SLEEP,
+ SET_IC_WAKE,
+
+ /* ALWAYS keep at the end */
+ MAX_CMD_CNT
+};
+
+/* ILITEK I2C R/W APIs */
+static int ilitek_i2c_write_and_read(struct ilitek_ts_data *ts,
+ u8 *cmd, int write_len, int delay,
+ u8 *data, int read_len)
+{
+ int error;
+ struct i2c_client *client = ts->client;
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = write_len,
+ .buf = cmd,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = read_len,
+ .buf = data,
+ },
+ };
+
+ if (delay == 0 && write_len > 0 && read_len > 0) {
+ error = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (error < 0)
+ return error;
+ } else {
+ if (write_len > 0) {
+ error = i2c_transfer(client->adapter, msgs, 1);
+ if (error < 0)
+ return error;
+ }
+ if (delay > 0)
+ mdelay(delay);
+
+ if (read_len > 0) {
+ error = i2c_transfer(client->adapter, msgs + 1, 1);
+ if (error < 0)
+ return error;
+ }
+ }
+
+ return 0;
+}
+
+/* ILITEK ISR APIs */
+static void ilitek_touch_down(struct ilitek_ts_data *ts, unsigned int id,
+ unsigned int x, unsigned int y)
+{
+ struct input_dev *input = ts->input_dev;
+
+ input_mt_slot(input, id);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+
+ touchscreen_report_pos(input, &ts->prop, x, y, true);
+}
+
+static int ilitek_process_and_report_v6(struct ilitek_ts_data *ts)
+{
+ int error = 0;
+ u8 buf[512];
+ int packet_len = 5;
+ int packet_max_point = 10;
+ int report_max_point;
+ int i, count;
+ struct input_dev *input = ts->input_dev;
+ struct device *dev = &ts->client->dev;
+ unsigned int x, y, status, id;
+
+ error = ilitek_i2c_write_and_read(ts, NULL, 0, 0, buf, 64);
+ if (error) {
+ dev_err(dev, "get touch info failed, err:%d\n", error);
+ goto err_sync_frame;
+ }
+
+ report_max_point = buf[REPORT_COUNT_ADDRESS];
+ if (report_max_point > ts->max_tp) {
+ dev_err(dev, "FW report max point:%d > panel info. max:%d\n",
+ report_max_point, ts->max_tp);
+ error = -EINVAL;
+ goto err_sync_frame;
+ }
+
+ count = DIV_ROUND_UP(report_max_point, packet_max_point);
+ for (i = 1; i < count; i++) {
+ error = ilitek_i2c_write_and_read(ts, NULL, 0, 0,
+ buf + i * 64, 64);
+ if (error) {
+ dev_err(dev, "get touch info. failed, cnt:%d, err:%d\n",
+ count, error);
+ goto err_sync_frame;
+ }
+ }
+
+ for (i = 0; i < report_max_point; i++) {
+ status = buf[i * packet_len + 1] & 0x40;
+ if (!status)
+ continue;
+
+ id = buf[i * packet_len + 1] & 0x3F;
+
+ x = get_unaligned_le16(buf + i * packet_len + 2);
+ y = get_unaligned_le16(buf + i * packet_len + 4);
+
+ if (x > ts->screen_max_x || x < ts->screen_min_x ||
+ y > ts->screen_max_y || y < ts->screen_min_y) {
+ dev_warn(dev, "invalid position, X[%d,%u,%d], Y[%d,%u,%d]\n",
+ ts->screen_min_x, x, ts->screen_max_x,
+ ts->screen_min_y, y, ts->screen_max_y);
+ continue;
+ }
+
+ ilitek_touch_down(ts, id, x, y);
+ }
+
+err_sync_frame:
+ input_mt_sync_frame(input);
+ input_sync(input);
+ return error;
+}
+
+/* APIs of cmds for ILITEK Touch IC */
+static int api_protocol_set_cmd(struct ilitek_ts_data *ts,
+ u16 idx, u8 *inbuf, u8 *outbuf)
+{
+ u16 cmd;
+ int error;
+
+ if (idx >= MAX_CMD_CNT)
+ return -EINVAL;
+
+ cmd = ts->ptl_cb_func[idx].cmd;
+ error = ts->ptl_cb_func[idx].func(ts, cmd, inbuf, outbuf);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+static int api_protocol_get_ptl_ver(struct ilitek_ts_data *ts,
+ u16 cmd, u8 *inbuf, u8 *outbuf)
+{
+ int error;
+ u8 buf[64];
+
+ buf[0] = cmd;
+ error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 3);
+ if (error)
+ return error;
+
+ ts->ptl.ver = get_unaligned_be16(outbuf);
+ ts->ptl.ver_major = outbuf[0];
+
+ return 0;
+}
+
+static int api_protocol_get_mcu_ver(struct ilitek_ts_data *ts,
+ u16 cmd, u8 *inbuf, u8 *outbuf)
+{
+ int error;
+ u8 buf[64];
+
+ buf[0] = cmd;
+ error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 32);
+ if (error)
+ return error;
+
+ ts->mcu_ver = get_unaligned_le16(outbuf);
+ memset(ts->product_id, 0, sizeof(ts->product_id));
+ memcpy(ts->product_id, outbuf + 6, 26);
+
+ return 0;
+}
+
+static int api_protocol_get_fw_ver(struct ilitek_ts_data *ts,
+ u16 cmd, u8 *inbuf, u8 *outbuf)
+{
+ int error;
+ u8 buf[64];
+
+ buf[0] = cmd;
+ error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 8);
+ if (error)
+ return error;
+
+ memcpy(ts->firmware_ver, outbuf, 8);
+
+ return 0;
+}
+
+static int api_protocol_get_scrn_res(struct ilitek_ts_data *ts,
+ u16 cmd, u8 *inbuf, u8 *outbuf)
+{
+ int error;
+ u8 buf[64];
+
+ buf[0] = cmd;
+ error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 8);
+ if (error)
+ return error;
+
+ ts->screen_min_x = get_unaligned_le16(outbuf);
+ ts->screen_min_y = get_unaligned_le16(outbuf + 2);
+ ts->screen_max_x = get_unaligned_le16(outbuf + 4);
+ ts->screen_max_y = get_unaligned_le16(outbuf + 6);
+
+ return 0;
+}
+
+static int api_protocol_get_tp_res(struct ilitek_ts_data *ts,
+ u16 cmd, u8 *inbuf, u8 *outbuf)
+{
+ int error;
+ u8 buf[64];
+
+ buf[0] = cmd;
+ error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 15);
+ if (error)
+ return error;
+
+ ts->max_tp = outbuf[8];
+ if (ts->max_tp > ILITEK_SUPPORT_MAX_POINT) {
+ dev_err(&ts->client->dev, "Invalid MAX_TP:%d from FW\n",
+ ts->max_tp);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int api_protocol_get_ic_mode(struct ilitek_ts_data *ts,
+ u16 cmd, u8 *inbuf, u8 *outbuf)
+{
+ int error;
+ u8 buf[64];
+
+ buf[0] = cmd;
+ error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 2);
+ if (error)
+ return error;
+
+ ts->ic_mode = outbuf[0];
+ return 0;
+}
+
+static int api_protocol_set_ic_sleep(struct ilitek_ts_data *ts,
+ u16 cmd, u8 *inbuf, u8 *outbuf)
+{
+ u8 buf[64];
+
+ buf[0] = cmd;
+ return ilitek_i2c_write_and_read(ts, buf, 1, 0, NULL, 0);
+}
+
+static int api_protocol_set_ic_wake(struct ilitek_ts_data *ts,
+ u16 cmd, u8 *inbuf, u8 *outbuf)
+{
+ u8 buf[64];
+
+ buf[0] = cmd;
+ return ilitek_i2c_write_and_read(ts, buf, 1, 0, NULL, 0);
+}
+
+static const struct ilitek_protocol_map ptl_func_map[] = {
+ /* common cmds */
+ [GET_PTL_VER] = {
+ ILITEK_TP_CMD_GET_PRL_VER, "GET_PTL_VER",
+ api_protocol_get_ptl_ver
+ },
+ [GET_FW_VER] = {
+ ILITEK_TP_CMD_GET_FW_VER, "GET_FW_VER",
+ api_protocol_get_fw_ver
+ },
+ [GET_SCRN_RES] = {
+ ILITEK_TP_CMD_GET_SCRN_RES, "GET_SCRN_RES",
+ api_protocol_get_scrn_res
+ },
+ [GET_TP_RES] = {
+ ILITEK_TP_CMD_GET_TP_RES, "GET_TP_RES",
+ api_protocol_get_tp_res
+ },
+ [GET_IC_MODE] = {
+ ILITEK_TP_CMD_GET_IC_MODE, "GET_IC_MODE",
+ api_protocol_get_ic_mode
+ },
+ [GET_MCU_VER] = {
+ ILITEK_TP_CMD_GET_MCU_VER, "GET_MOD_VER",
+ api_protocol_get_mcu_ver
+ },
+ [SET_IC_SLEEP] = {
+ ILITEK_TP_CMD_SET_IC_SLEEP, "SET_IC_SLEEP",
+ api_protocol_set_ic_sleep
+ },
+ [SET_IC_WAKE] = {
+ ILITEK_TP_CMD_SET_IC_WAKE, "SET_IC_WAKE",
+ api_protocol_set_ic_wake
+ },
+};
+
+/* Probe APIs */
+static void ilitek_reset(struct ilitek_ts_data *ts, int delay)
+{
+ if (ts->reset_gpio) {
+ gpiod_set_value(ts->reset_gpio, 1);
+ mdelay(10);
+ gpiod_set_value(ts->reset_gpio, 0);
+ mdelay(delay);
+ }
+}
+
+static int ilitek_protocol_init(struct ilitek_ts_data *ts)
+{
+ int error;
+ u8 outbuf[64];
+
+ ts->ptl_cb_func = ptl_func_map;
+ ts->reset_time = 600;
+
+ error = api_protocol_set_cmd(ts, GET_PTL_VER, NULL, outbuf);
+ if (error)
+ return error;
+
+ /* Protocol v3 is not support currently */
+ if (ts->ptl.ver_major == 0x3 ||
+ ts->ptl.ver == BL_V1_6 ||
+ ts->ptl.ver == BL_V1_7)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ilitek_read_tp_info(struct ilitek_ts_data *ts, bool boot)
+{
+ u8 outbuf[256];
+ int error;
+
+ error = api_protocol_set_cmd(ts, GET_PTL_VER, NULL, outbuf);
+ if (error)
+ return error;
+
+ error = api_protocol_set_cmd(ts, GET_MCU_VER, NULL, outbuf);
+ if (error)
+ return error;
+
+ error = api_protocol_set_cmd(ts, GET_FW_VER, NULL, outbuf);
+ if (error)
+ return error;
+
+ if (boot) {
+ error = api_protocol_set_cmd(ts, GET_SCRN_RES, NULL,
+ outbuf);
+ if (error)
+ return error;
+ }
+
+ error = api_protocol_set_cmd(ts, GET_TP_RES, NULL, outbuf);
+ if (error)
+ return error;
+
+ error = api_protocol_set_cmd(ts, GET_IC_MODE, NULL, outbuf);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+static int ilitek_input_dev_init(struct device *dev, struct ilitek_ts_data *ts)
+{
+ int error;
+ struct input_dev *input;
+
+ input = devm_input_allocate_device(dev);
+ if (!input)
+ return -ENOMEM;
+
+ ts->input_dev = input;
+ input->name = ILITEK_TS_NAME;
+ input->id.bustype = BUS_I2C;
+
+ __set_bit(INPUT_PROP_DIRECT, input->propbit);
+
+ input_set_abs_params(input, ABS_MT_POSITION_X,
+ ts->screen_min_x, ts->screen_max_x, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y,
+ ts->screen_min_y, ts->screen_max_y, 0, 0);
+
+ touchscreen_parse_properties(input, true, &ts->prop);
+
+ error = input_mt_init_slots(input, ts->max_tp,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(dev, "initialize MT slots failed, err:%d\n", error);
+ return error;
+ }
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(dev, "register input device failed, err:%d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static irqreturn_t ilitek_i2c_isr(int irq, void *dev_id)
+{
+ struct ilitek_ts_data *ts = dev_id;
+ int error;
+
+ error = ilitek_process_and_report_v6(ts);
+ if (error < 0) {
+ dev_err(&ts->client->dev, "[%s] err:%d\n", __func__, error);
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static ssize_t firmware_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ilitek_ts_data *ts = i2c_get_clientdata(client);
+
+ return scnprintf(buf, PAGE_SIZE,
+ "fw version: [%02X%02X.%02X%02X.%02X%02X.%02X%02X]\n",
+ ts->firmware_ver[0], ts->firmware_ver[1],
+ ts->firmware_ver[2], ts->firmware_ver[3],
+ ts->firmware_ver[4], ts->firmware_ver[5],
+ ts->firmware_ver[6], ts->firmware_ver[7]);
+}
+static DEVICE_ATTR_RO(firmware_version);
+
+static ssize_t product_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ilitek_ts_data *ts = i2c_get_clientdata(client);
+
+ return scnprintf(buf, PAGE_SIZE, "product id: [%04X], module: [%s]\n",
+ ts->mcu_ver, ts->product_id);
+}
+static DEVICE_ATTR_RO(product_id);
+
+static struct attribute *ilitek_sysfs_attrs[] = {
+ &dev_attr_firmware_version.attr,
+ &dev_attr_product_id.attr,
+ NULL
+};
+
+static struct attribute_group ilitek_attrs_group = {
+ .attrs = ilitek_sysfs_attrs,
+};
+
+static int ilitek_ts_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ilitek_ts_data *ts;
+ struct device *dev = &client->dev;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(dev, "i2c check functionality failed\n");
+ return -ENXIO;
+ }
+
+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ ts->client = client;
+ i2c_set_clientdata(client, ts);
+
+ ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ts->reset_gpio)) {
+ error = PTR_ERR(ts->reset_gpio);
+ dev_err(dev, "request gpiod failed: %d", error);
+ return error;
+ }
+
+ ilitek_reset(ts, 1000);
+
+ error = ilitek_protocol_init(ts);
+ if (error) {
+ dev_err(dev, "protocol init failed: %d", error);
+ return error;
+ }
+
+ error = ilitek_read_tp_info(ts, true);
+ if (error) {
+ dev_err(dev, "read tp info failed: %d", error);
+ return error;
+ }
+
+ error = ilitek_input_dev_init(dev, ts);
+ if (error) {
+ dev_err(dev, "input dev init failed: %d", error);
+ return error;
+ }
+
+ error = devm_request_threaded_irq(dev, ts->client->irq,
+ NULL, ilitek_i2c_isr, IRQF_ONESHOT,
+ "ilitek_touch_irq", ts);
+ if (error) {
+ dev_err(dev, "request threaded irq failed: %d\n", error);
+ return error;
+ }
+
+ error = devm_device_add_group(dev, &ilitek_attrs_group);
+ if (error) {
+ dev_err(dev, "sysfs create group failed: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused ilitek_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ilitek_ts_data *ts = i2c_get_clientdata(client);
+ int error;
+
+ disable_irq(client->irq);
+
+ if (!device_may_wakeup(dev)) {
+ error = api_protocol_set_cmd(ts, SET_IC_SLEEP, NULL, NULL);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused ilitek_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ilitek_ts_data *ts = i2c_get_clientdata(client);
+ int error;
+
+ if (!device_may_wakeup(dev)) {
+ error = api_protocol_set_cmd(ts, SET_IC_WAKE, NULL, NULL);
+ if (error)
+ return error;
+
+ ilitek_reset(ts, ts->reset_time);
+ }
+
+ enable_irq(client->irq);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ilitek_pm_ops, ilitek_suspend, ilitek_resume);
+
+static const struct i2c_device_id ilitek_ts_i2c_id[] = {
+ { ILITEK_TS_NAME, 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, ilitek_ts_i2c_id);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id ilitekts_acpi_id[] = {
+ { "ILTK0001", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, ilitekts_acpi_id);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id ilitek_ts_i2c_match[] = {
+ {.compatible = "ilitek,ili2130",},
+ {.compatible = "ilitek,ili2131",},
+ {.compatible = "ilitek,ili2132",},
+ {.compatible = "ilitek,ili2316",},
+ {.compatible = "ilitek,ili2322",},
+ {.compatible = "ilitek,ili2323",},
+ {.compatible = "ilitek,ili2326",},
+ {.compatible = "ilitek,ili2520",},
+ {.compatible = "ilitek,ili2521",},
+ { },
+};
+MODULE_DEVICE_TABLE(of, ilitek_ts_i2c_match);
+#endif
+
+static struct i2c_driver ilitek_ts_i2c_driver = {
+ .driver = {
+ .name = ILITEK_TS_NAME,
+ .pm = &ilitek_pm_ops,
+ .of_match_table = of_match_ptr(ilitek_ts_i2c_match),
+ .acpi_match_table = ACPI_PTR(ilitekts_acpi_id),
+ },
+ .probe = ilitek_ts_i2c_probe,
+ .id_table = ilitek_ts_i2c_id,
+};
+module_i2c_driver(ilitek_ts_i2c_driver);
+
+MODULE_AUTHOR("ILITEK");
+MODULE_DESCRIPTION("ILITEK I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/iqs5xx.c b/drivers/input/touchscreen/iqs5xx.c
index 54f30038dca4..b3fa71213d60 100644
--- a/drivers/input/touchscreen/iqs5xx.c
+++ b/drivers/input/touchscreen/iqs5xx.c
@@ -8,7 +8,7 @@
* made available by the vendor. Firmware files may be pushed to the device's
* nonvolatile memory by writing the filename to the 'fw_file' sysfs control.
*
- * Link to PC-based configuration tool and data sheet: http://www.azoteq.com/
+ * Link to PC-based configuration tool and datasheet: https://www.azoteq.com/
*/
#include <linux/bits.h>
@@ -32,14 +32,10 @@
#define IQS5XX_NUM_RETRIES 10
#define IQS5XX_NUM_CONTACTS 5
#define IQS5XX_WR_BYTES_MAX 2
-#define IQS5XX_XY_RES_MAX 0xFFFE
#define IQS5XX_PROD_NUM_IQS550 40
#define IQS5XX_PROD_NUM_IQS572 58
#define IQS5XX_PROD_NUM_IQS525 52
-#define IQS5XX_PROJ_NUM_A000 0
-#define IQS5XX_PROJ_NUM_B000 15
-#define IQS5XX_MAJOR_VER_MIN 2
#define IQS5XX_SHOW_RESET BIT(7)
#define IQS5XX_ACK_RESET BIT(7)
@@ -64,6 +60,7 @@
#define IQS5XX_SYS_CFG1 0x058F
#define IQS5XX_X_RES 0x066E
#define IQS5XX_Y_RES 0x0670
+#define IQS5XX_EXP_FILE 0x0677
#define IQS5XX_CHKSM 0x83C0
#define IQS5XX_APP 0x8400
#define IQS5XX_CSTM 0xBE00
@@ -87,22 +84,11 @@
#define IQS5XX_BL_CMD_CRC 0x03
#define IQS5XX_BL_BLK_LEN_MAX 64
#define IQS5XX_BL_ID 0x0200
-#define IQS5XX_BL_STATUS_RESET 0x00
-#define IQS5XX_BL_STATUS_AVAIL 0xA5
#define IQS5XX_BL_STATUS_NONE 0xEE
#define IQS5XX_BL_CRC_PASS 0x00
#define IQS5XX_BL_CRC_FAIL 0x01
#define IQS5XX_BL_ATTEMPTS 3
-struct iqs5xx_private {
- struct i2c_client *client;
- struct input_dev *input;
- struct gpio_desc *reset_gpio;
- struct touchscreen_properties prop;
- struct mutex lock;
- u8 bl_status;
-};
-
struct iqs5xx_dev_id_info {
__be16 prod_num;
__be16 proj_num;
@@ -134,6 +120,16 @@ struct iqs5xx_status {
struct iqs5xx_touch_data touch_data[IQS5XX_NUM_CONTACTS];
} __packed;
+struct iqs5xx_private {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct gpio_desc *reset_gpio;
+ struct touchscreen_properties prop;
+ struct mutex lock;
+ struct iqs5xx_dev_id_info dev_id_info;
+ u8 exp_file[2];
+};
+
static int iqs5xx_read_burst(struct i2c_client *client,
u16 reg, void *val, u16 len)
{
@@ -446,7 +442,7 @@ static int iqs5xx_set_state(struct i2c_client *client, u8 state)
struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
int error1, error2;
- if (iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
+ if (!iqs5xx->dev_id_info.bl_status)
return 0;
mutex_lock(&iqs5xx->lock);
@@ -504,10 +500,6 @@ static int iqs5xx_axis_init(struct i2c_client *client)
input->open = iqs5xx_open;
input->close = iqs5xx_close;
- input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
- input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
- input_set_capability(input, EV_ABS, ABS_MT_PRESSURE);
-
input_set_drvdata(input, iqs5xx);
iqs5xx->input = input;
}
@@ -520,26 +512,29 @@ static int iqs5xx_axis_init(struct i2c_client *client)
if (error)
return error;
- input_abs_set_max(iqs5xx->input, ABS_MT_POSITION_X, max_x);
- input_abs_set_max(iqs5xx->input, ABS_MT_POSITION_Y, max_y);
+ input_set_abs_params(iqs5xx->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
+ input_set_abs_params(iqs5xx->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
+ input_set_abs_params(iqs5xx->input, ABS_MT_PRESSURE, 0, U16_MAX, 0, 0);
touchscreen_parse_properties(iqs5xx->input, true, prop);
- if (prop->max_x > IQS5XX_XY_RES_MAX) {
- dev_err(&client->dev, "Invalid maximum x-coordinate: %u > %u\n",
- prop->max_x, IQS5XX_XY_RES_MAX);
+ /*
+ * The device reserves 0xFFFF for coordinates that correspond to slots
+ * which are not in a state of touch.
+ */
+ if (prop->max_x >= U16_MAX || prop->max_y >= U16_MAX) {
+ dev_err(&client->dev, "Invalid touchscreen size: %u*%u\n",
+ prop->max_x, prop->max_y);
return -EINVAL;
- } else if (prop->max_x != max_x) {
+ }
+
+ if (prop->max_x != max_x) {
error = iqs5xx_write_word(client, IQS5XX_X_RES, prop->max_x);
if (error)
return error;
}
- if (prop->max_y > IQS5XX_XY_RES_MAX) {
- dev_err(&client->dev, "Invalid maximum y-coordinate: %u > %u\n",
- prop->max_y, IQS5XX_XY_RES_MAX);
- return -EINVAL;
- } else if (prop->max_y != max_y) {
+ if (prop->max_y != max_y) {
error = iqs5xx_write_word(client, IQS5XX_Y_RES, prop->max_y);
if (error)
return error;
@@ -574,7 +569,7 @@ static int iqs5xx_dev_init(struct i2c_client *client)
* the missing zero is prepended).
*/
buf[0] = 0;
- dev_id_info = (struct iqs5xx_dev_id_info *)&buf[(buf[1] > 0) ? 0 : 1];
+ dev_id_info = (struct iqs5xx_dev_id_info *)&buf[buf[1] ? 0 : 1];
switch (be16_to_cpu(dev_id_info->prod_num)) {
case IQS5XX_PROD_NUM_IQS550:
@@ -587,35 +582,20 @@ static int iqs5xx_dev_init(struct i2c_client *client)
return -EINVAL;
}
- switch (be16_to_cpu(dev_id_info->proj_num)) {
- case IQS5XX_PROJ_NUM_A000:
- dev_err(&client->dev, "Unsupported project number: %u\n",
- be16_to_cpu(dev_id_info->proj_num));
- return iqs5xx_bl_open(client);
- case IQS5XX_PROJ_NUM_B000:
- break;
- default:
- dev_err(&client->dev, "Unrecognized project number: %u\n",
- be16_to_cpu(dev_id_info->proj_num));
- return -EINVAL;
- }
-
- if (dev_id_info->major_ver < IQS5XX_MAJOR_VER_MIN) {
- dev_err(&client->dev, "Unsupported major version: %u\n",
- dev_id_info->major_ver);
+ /*
+ * With the product number recognized yet shifted by one byte, open the
+ * bootloader and wait for user space to convert the A000 device into a
+ * B000 device via new firmware.
+ */
+ if (buf[1]) {
+ dev_err(&client->dev, "Opening bootloader for A000 device\n");
return iqs5xx_bl_open(client);
}
- switch (dev_id_info->bl_status) {
- case IQS5XX_BL_STATUS_AVAIL:
- case IQS5XX_BL_STATUS_NONE:
- break;
- default:
- dev_err(&client->dev,
- "Unrecognized bootloader status: 0x%02X\n",
- dev_id_info->bl_status);
- return -EINVAL;
- }
+ error = iqs5xx_read_burst(client, IQS5XX_EXP_FILE,
+ iqs5xx->exp_file, sizeof(iqs5xx->exp_file));
+ if (error)
+ return error;
error = iqs5xx_axis_init(client);
if (error)
@@ -640,7 +620,7 @@ static int iqs5xx_dev_init(struct i2c_client *client)
if (error)
return error;
- iqs5xx->bl_status = dev_id_info->bl_status;
+ iqs5xx->dev_id_info = *dev_id_info;
/*
* The following delay allows ATI to complete before the open and close
@@ -666,7 +646,7 @@ static irqreturn_t iqs5xx_irq(int irq, void *data)
* RDY output during bootloader mode. If the device operates outside of
* bootloader mode, the input device is guaranteed to be allocated.
*/
- if (iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
+ if (!iqs5xx->dev_id_info.bl_status)
return IRQ_NONE;
error = iqs5xx_read_burst(client, IQS5XX_SYS_INFO0,
@@ -852,12 +832,9 @@ static int iqs5xx_fw_file_parse(struct i2c_client *client,
static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file)
{
struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
- int error, error_bl = 0;
+ int error, error_init = 0;
u8 *pmap;
- if (iqs5xx->bl_status == IQS5XX_BL_STATUS_NONE)
- return -EPERM;
-
pmap = kzalloc(IQS5XX_PMAP_LEN, GFP_KERNEL);
if (!pmap)
return -ENOMEM;
@@ -875,7 +852,7 @@ static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file)
*/
disable_irq(client->irq);
- iqs5xx->bl_status = IQS5XX_BL_STATUS_RESET;
+ iqs5xx->dev_id_info.bl_status = 0;
error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_VER, 0);
if (error) {
@@ -895,21 +872,14 @@ static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file)
error = iqs5xx_bl_verify(client, IQS5XX_CSTM,
pmap + IQS5XX_CHKSM_LEN + IQS5XX_APP_LEN,
IQS5XX_CSTM_LEN);
- if (error)
- goto err_reset;
-
- error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_EXEC, 0);
err_reset:
- if (error) {
- iqs5xx_reset(client);
- usleep_range(10000, 10100);
- }
+ iqs5xx_reset(client);
+ usleep_range(15000, 15100);
- error_bl = error;
- error = iqs5xx_dev_init(client);
- if (!error && iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
- error = -EINVAL;
+ error_init = iqs5xx_dev_init(client);
+ if (!iqs5xx->dev_id_info.bl_status)
+ error_init = error_init ? : -EINVAL;
enable_irq(client->irq);
@@ -918,10 +888,7 @@ err_reset:
err_kfree:
kfree(pmap);
- if (error_bl)
- return error_bl;
-
- return error;
+ return error ? : error_init;
}
static ssize_t fw_file_store(struct device *dev,
@@ -968,14 +935,47 @@ static ssize_t fw_file_store(struct device *dev,
return count;
}
+static ssize_t fw_info_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev);
+
+ if (!iqs5xx->dev_id_info.bl_status)
+ return -ENODATA;
+
+ return scnprintf(buf, PAGE_SIZE, "%u.%u.%u.%u:%u.%u\n",
+ be16_to_cpu(iqs5xx->dev_id_info.prod_num),
+ be16_to_cpu(iqs5xx->dev_id_info.proj_num),
+ iqs5xx->dev_id_info.major_ver,
+ iqs5xx->dev_id_info.minor_ver,
+ iqs5xx->exp_file[0], iqs5xx->exp_file[1]);
+}
+
static DEVICE_ATTR_WO(fw_file);
+static DEVICE_ATTR_RO(fw_info);
static struct attribute *iqs5xx_attrs[] = {
&dev_attr_fw_file.attr,
+ &dev_attr_fw_info.attr,
NULL,
};
+static umode_t iqs5xx_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int i)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev);
+
+ if (attr == &dev_attr_fw_file.attr &&
+ (iqs5xx->dev_id_info.bl_status == IQS5XX_BL_STATUS_NONE ||
+ !iqs5xx->reset_gpio))
+ return 0;
+
+ return attr->mode;
+}
+
static const struct attribute_group iqs5xx_attr_group = {
+ .is_visible = iqs5xx_attr_is_visible,
.attrs = iqs5xx_attrs,
};
@@ -1032,8 +1032,8 @@ static int iqs5xx_probe(struct i2c_client *client,
i2c_set_clientdata(client, iqs5xx);
iqs5xx->client = client;
- iqs5xx->reset_gpio = devm_gpiod_get(&client->dev,
- "reset", GPIOD_OUT_LOW);
+ iqs5xx->reset_gpio = devm_gpiod_get_optional(&client->dev,
+ "reset", GPIOD_OUT_LOW);
if (IS_ERR(iqs5xx->reset_gpio)) {
error = PTR_ERR(iqs5xx->reset_gpio);
dev_err(&client->dev, "Failed to request GPIO: %d\n", error);
@@ -1042,9 +1042,6 @@ static int iqs5xx_probe(struct i2c_client *client,
mutex_init(&iqs5xx->lock);
- iqs5xx_reset(client);
- usleep_range(10000, 10100);
-
error = iqs5xx_dev_init(client);
if (error)
return error;
diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c
index b51450b3d943..15b5cb763526 100644
--- a/drivers/input/touchscreen/lpc32xx_ts.c
+++ b/drivers/input/touchscreen/lpc32xx_ts.c
@@ -34,18 +34,18 @@
#define LPC32XX_TSC_AUX_MIN 0x38
#define LPC32XX_TSC_AUX_MAX 0x3C
-#define LPC32XX_TSC_STAT_FIFO_OVRRN (1 << 8)
-#define LPC32XX_TSC_STAT_FIFO_EMPTY (1 << 7)
+#define LPC32XX_TSC_STAT_FIFO_OVRRN BIT(8)
+#define LPC32XX_TSC_STAT_FIFO_EMPTY BIT(7)
#define LPC32XX_TSC_SEL_DEFVAL 0x0284
#define LPC32XX_TSC_ADCCON_IRQ_TO_FIFO_4 (0x1 << 11)
#define LPC32XX_TSC_ADCCON_X_SAMPLE_SIZE(s) ((10 - (s)) << 7)
#define LPC32XX_TSC_ADCCON_Y_SAMPLE_SIZE(s) ((10 - (s)) << 4)
-#define LPC32XX_TSC_ADCCON_POWER_UP (1 << 2)
-#define LPC32XX_TSC_ADCCON_AUTO_EN (1 << 0)
+#define LPC32XX_TSC_ADCCON_POWER_UP BIT(2)
+#define LPC32XX_TSC_ADCCON_AUTO_EN BIT(0)
-#define LPC32XX_TSC_FIFO_TS_P_LEVEL (1 << 31)
+#define LPC32XX_TSC_FIFO_TS_P_LEVEL BIT(31)
#define LPC32XX_TSC_FIFO_NORMALIZE_X_VAL(x) (((x) & 0x03FF0000) >> 16)
#define LPC32XX_TSC_FIFO_NORMALIZE_Y_VAL(y) ((y) & 0x000003FF)
diff --git a/drivers/input/touchscreen/melfas_mip4.c b/drivers/input/touchscreen/melfas_mip4.c
index 225796a3f546..2745bf1aee38 100644
--- a/drivers/input/touchscreen/melfas_mip4.c
+++ b/drivers/input/touchscreen/melfas_mip4.c
@@ -1502,7 +1502,8 @@ static int mip4_probe(struct i2c_client *client, const struct i2c_device_id *id)
error = devm_request_threaded_irq(&client->dev, client->irq,
NULL, mip4_interrupt,
- IRQF_ONESHOT, MIP4_DEVICE_NAME, ts);
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
+ MIP4_DEVICE_NAME, ts);
if (error) {
dev_err(&client->dev,
"Failed to request interrupt %d: %d\n",
@@ -1510,8 +1511,6 @@ static int mip4_probe(struct i2c_client *client, const struct i2c_device_id *id)
return error;
}
- disable_irq(client->irq);
-
error = input_register_device(input);
if (error) {
dev_err(&client->dev,
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index 16557f51b09d..0efd1a1bb192 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-// Melfas MMS114/MMS152 touchscreen device driver
+// Melfas MMS114/MMS136/MMS152 touchscreen device driver
//
// Copyright (c) 2012 Samsung Electronics Co., Ltd.
// Author: Joonyoung Shim <jy0922.shim@samsung.com>
@@ -44,7 +44,8 @@
#define MMS114_MAX_AREA 0xff
#define MMS114_MAX_TOUCH 10
-#define MMS114_PACKET_NUM 8
+#define MMS114_EVENT_SIZE 8
+#define MMS136_EVENT_SIZE 6
/* Touch type */
#define MMS114_TYPE_NONE 0
@@ -53,6 +54,7 @@
enum mms_type {
TYPE_MMS114 = 114,
+ TYPE_MMS136 = 136,
TYPE_MMS152 = 152,
TYPE_MMS345L = 345,
};
@@ -209,7 +211,11 @@ static irqreturn_t mms114_interrupt(int irq, void *dev_id)
if (packet_size <= 0)
goto out;
- touch_size = packet_size / MMS114_PACKET_NUM;
+ /* MMS136 has slightly different event size */
+ if (data->type == TYPE_MMS136)
+ touch_size = packet_size / MMS136_EVENT_SIZE;
+ else
+ touch_size = packet_size / MMS114_EVENT_SIZE;
error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
(u8 *)touch);
@@ -275,6 +281,7 @@ static int mms114_get_version(struct mms114_data *data)
break;
case TYPE_MMS114:
+ case TYPE_MMS136:
error = __mms114_read_reg(data, MMS114_TSP_REV, 6, buf);
if (error)
return error;
@@ -297,8 +304,8 @@ static int mms114_setup_regs(struct mms114_data *data)
if (error < 0)
return error;
- /* Only MMS114 has configuration and power on registers */
- if (data->type != TYPE_MMS114)
+ /* Only MMS114 and MMS136 have configuration and power on registers */
+ if (data->type != TYPE_MMS114 && data->type != TYPE_MMS136)
return 0;
error = mms114_set_active(data, true);
@@ -480,7 +487,7 @@ static int mms114_probe(struct i2c_client *client,
0, data->props.max_y, 0, 0);
}
- if (data->type == TYPE_MMS114) {
+ if (data->type == TYPE_MMS114 || data->type == TYPE_MMS136) {
/*
* The firmware handles movement and pressure fuzz, so
* don't duplicate that in software.
@@ -530,13 +537,13 @@ static int mms114_probe(struct i2c_client *client,
}
error = devm_request_threaded_irq(&client->dev, client->irq,
- NULL, mms114_interrupt, IRQF_ONESHOT,
+ NULL, mms114_interrupt,
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
dev_name(&client->dev), data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
return error;
}
- disable_irq(client->irq);
error = input_register_device(data->input_dev);
if (error) {
@@ -605,6 +612,9 @@ static const struct of_device_id mms114_dt_match[] = {
.compatible = "melfas,mms114",
.data = (void *)TYPE_MMS114,
}, {
+ .compatible = "melfas,mms136",
+ .data = (void *)TYPE_MMS136,
+ }, {
.compatible = "melfas,mms152",
.data = (void *)TYPE_MMS152,
}, {
diff --git a/drivers/input/touchscreen/msg2638.c b/drivers/input/touchscreen/msg2638.c
new file mode 100644
index 000000000000..75536bc88969
--- /dev/null
+++ b/drivers/input/touchscreen/msg2638.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for MStar msg2638 touchscreens
+ *
+ * Copyright (c) 2021 Vincent Knecht <vincent.knecht@mailoo.org>
+ *
+ * Checksum and IRQ handler based on mstar_drv_common.c and
+ * mstar_drv_mutual_fw_control.c
+ * Copyright (c) 2006-2012 MStar Semiconductor, Inc.
+ *
+ * Driver structure based on zinitix.c by Michael Srba <Michael.Srba@seznam.cz>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#define MODE_DATA_RAW 0x5A
+
+#define MAX_SUPPORTED_FINGER_NUM 5
+
+#define CHIP_ON_DELAY_MS 15
+#define FIRMWARE_ON_DELAY_MS 50
+#define RESET_DELAY_MIN_US 10000
+#define RESET_DELAY_MAX_US 11000
+
+struct packet {
+ u8 xy_hi; /* higher bits of x and y coordinates */
+ u8 x_low;
+ u8 y_low;
+ u8 pressure;
+};
+
+struct touch_event {
+ u8 mode;
+ struct packet pkt[MAX_SUPPORTED_FINGER_NUM];
+ u8 proximity;
+ u8 checksum;
+};
+
+struct msg2638_ts_data {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct touchscreen_properties prop;
+ struct regulator_bulk_data supplies[2];
+ struct gpio_desc *reset_gpiod;
+};
+
+static u8 msg2638_checksum(u8 *data, u32 length)
+{
+ s32 sum = 0;
+ u32 i;
+
+ for (i = 0; i < length; i++)
+ sum += data[i];
+
+ return (u8)((-sum) & 0xFF);
+}
+
+static irqreturn_t msg2638_ts_irq_handler(int irq, void *msg2638_handler)
+{
+ struct msg2638_ts_data *msg2638 = msg2638_handler;
+ struct i2c_client *client = msg2638->client;
+ struct input_dev *input = msg2638->input_dev;
+ struct touch_event touch_event;
+ u32 len = sizeof(touch_event);
+ struct i2c_msg msg[] = {
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = sizeof(touch_event),
+ .buf = (u8 *)&touch_event,
+ },
+ };
+ struct packet *p;
+ u16 x, y;
+ int ret;
+ int i;
+
+ ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+ if (ret != ARRAY_SIZE(msg)) {
+ dev_err(&client->dev,
+ "Failed I2C transfer in irq handler: %d\n",
+ ret < 0 ? ret : -EIO);
+ goto out;
+ }
+
+ if (touch_event.mode != MODE_DATA_RAW)
+ goto out;
+
+ if (msg2638_checksum((u8 *)&touch_event, len - 1) !=
+ touch_event.checksum) {
+ dev_err(&client->dev, "Failed checksum!\n");
+ goto out;
+ }
+
+ for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++) {
+ p = &touch_event.pkt[i];
+
+ /* Ignore non-pressed finger data */
+ if (p->xy_hi == 0xFF && p->x_low == 0xFF && p->y_low == 0xFF)
+ continue;
+
+ x = (((p->xy_hi & 0xF0) << 4) | p->x_low);
+ y = (((p->xy_hi & 0x0F) << 8) | p->y_low);
+
+ input_mt_slot(input, i);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+ touchscreen_report_pos(input, &msg2638->prop, x, y, true);
+ }
+
+ input_mt_sync_frame(msg2638->input_dev);
+ input_sync(msg2638->input_dev);
+
+out:
+ return IRQ_HANDLED;
+}
+
+static void msg2638_reset(struct msg2638_ts_data *msg2638)
+{
+ gpiod_set_value_cansleep(msg2638->reset_gpiod, 1);
+ usleep_range(RESET_DELAY_MIN_US, RESET_DELAY_MAX_US);
+ gpiod_set_value_cansleep(msg2638->reset_gpiod, 0);
+ msleep(FIRMWARE_ON_DELAY_MS);
+}
+
+static int msg2638_start(struct msg2638_ts_data *msg2638)
+{
+ int error;
+
+ error = regulator_bulk_enable(ARRAY_SIZE(msg2638->supplies),
+ msg2638->supplies);
+ if (error) {
+ dev_err(&msg2638->client->dev,
+ "Failed to enable regulators: %d\n", error);
+ return error;
+ }
+
+ msleep(CHIP_ON_DELAY_MS);
+
+ msg2638_reset(msg2638);
+
+ enable_irq(msg2638->client->irq);
+
+ return 0;
+}
+
+static int msg2638_stop(struct msg2638_ts_data *msg2638)
+{
+ int error;
+
+ disable_irq(msg2638->client->irq);
+
+ error = regulator_bulk_disable(ARRAY_SIZE(msg2638->supplies),
+ msg2638->supplies);
+ if (error) {
+ dev_err(&msg2638->client->dev,
+ "Failed to disable regulators: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int msg2638_input_open(struct input_dev *dev)
+{
+ struct msg2638_ts_data *msg2638 = input_get_drvdata(dev);
+
+ return msg2638_start(msg2638);
+}
+
+static void msg2638_input_close(struct input_dev *dev)
+{
+ struct msg2638_ts_data *msg2638 = input_get_drvdata(dev);
+
+ msg2638_stop(msg2638);
+}
+
+static int msg2638_init_input_dev(struct msg2638_ts_data *msg2638)
+{
+ struct device *dev = &msg2638->client->dev;
+ struct input_dev *input_dev;
+ int error;
+
+ input_dev = devm_input_allocate_device(dev);
+ if (!input_dev) {
+ dev_err(dev, "Failed to allocate input device.\n");
+ return -ENOMEM;
+ }
+
+ input_set_drvdata(input_dev, msg2638);
+ msg2638->input_dev = input_dev;
+
+ input_dev->name = "MStar TouchScreen";
+ input_dev->phys = "input/ts";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->open = msg2638_input_open;
+ input_dev->close = msg2638_input_close;
+
+ input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
+ input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
+
+ touchscreen_parse_properties(input_dev, true, &msg2638->prop);
+ if (!msg2638->prop.max_x || !msg2638->prop.max_y) {
+ dev_err(dev, "touchscreen-size-x and/or touchscreen-size-y not set in properties\n");
+ return -EINVAL;
+ }
+
+ error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(dev, "Failed to initialize MT slots: %d\n", error);
+ return error;
+ }
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(dev, "Failed to register input device: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int msg2638_ts_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct msg2638_ts_data *msg2638;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(dev, "Failed to assert adapter's support for plain I2C.\n");
+ return -ENXIO;
+ }
+
+ msg2638 = devm_kzalloc(dev, sizeof(*msg2638), GFP_KERNEL);
+ if (!msg2638)
+ return -ENOMEM;
+
+ msg2638->client = client;
+ i2c_set_clientdata(client, msg2638);
+
+ msg2638->supplies[0].supply = "vdd";
+ msg2638->supplies[1].supply = "vddio";
+ error = devm_regulator_bulk_get(dev, ARRAY_SIZE(msg2638->supplies),
+ msg2638->supplies);
+ if (error) {
+ dev_err(dev, "Failed to get regulators: %d\n", error);
+ return error;
+ }
+
+ msg2638->reset_gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(msg2638->reset_gpiod)) {
+ error = PTR_ERR(msg2638->reset_gpiod);
+ dev_err(dev, "Failed to request reset GPIO: %d\n", error);
+ return error;
+ }
+
+ error = msg2638_init_input_dev(msg2638);
+ if (error) {
+ dev_err(dev, "Failed to initialize input device: %d\n", error);
+ return error;
+ }
+
+ error = devm_request_threaded_irq(dev, client->irq,
+ NULL, msg2638_ts_irq_handler,
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
+ client->name, msg2638);
+ if (error) {
+ dev_err(dev, "Failed to request IRQ: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused msg2638_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct msg2638_ts_data *msg2638 = i2c_get_clientdata(client);
+
+ mutex_lock(&msg2638->input_dev->mutex);
+
+ if (input_device_enabled(msg2638->input_dev))
+ msg2638_stop(msg2638);
+
+ mutex_unlock(&msg2638->input_dev->mutex);
+
+ return 0;
+}
+
+static int __maybe_unused msg2638_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct msg2638_ts_data *msg2638 = i2c_get_clientdata(client);
+ int ret = 0;
+
+ mutex_lock(&msg2638->input_dev->mutex);
+
+ if (input_device_enabled(msg2638->input_dev))
+ ret = msg2638_start(msg2638);
+
+ mutex_unlock(&msg2638->input_dev->mutex);
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(msg2638_pm_ops, msg2638_suspend, msg2638_resume);
+
+static const struct of_device_id msg2638_of_match[] = {
+ { .compatible = "mstar,msg2638" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, msg2638_of_match);
+
+static struct i2c_driver msg2638_ts_driver = {
+ .probe_new = msg2638_ts_probe,
+ .driver = {
+ .name = "MStar-TS",
+ .pm = &msg2638_pm_ops,
+ .of_match_table = msg2638_of_match,
+ },
+};
+module_i2c_driver(msg2638_ts_driver);
+
+MODULE_AUTHOR("Vincent Knecht <vincent.knecht@mailoo.org>");
+MODULE_DESCRIPTION("MStar MSG2638 touchscreen driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
index 8fa2f3b7cfd8..1ee760bac0cf 100644
--- a/drivers/input/touchscreen/silead.c
+++ b/drivers/input/touchscreen/silead.c
@@ -20,6 +20,7 @@
#include <linux/input/mt.h>
#include <linux/input/touchscreen.h>
#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/irq.h>
#include <linux/regulator/consumer.h>
@@ -335,10 +336,8 @@ static int silead_ts_get_id(struct i2c_client *client)
error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_ID,
sizeof(chip_id), (u8 *)&chip_id);
- if (error < 0) {
- dev_err(&client->dev, "Chip ID read error %d\n", error);
+ if (error < 0)
return error;
- }
data->chip_id = le32_to_cpu(chip_id);
dev_info(&client->dev, "Silead chip ID: 0x%8X", data->chip_id);
@@ -351,12 +350,49 @@ static int silead_ts_setup(struct i2c_client *client)
int error;
u32 status;
+ /*
+ * Some buggy BIOS-es bring up the chip in a stuck state where it
+ * blocks the I2C bus. The following steps are necessary to
+ * unstuck the chip / bus:
+ * 1. Turn off the Silead chip.
+ * 2. Try to do an I2C transfer with the chip, this will fail in
+ * response to which the I2C-bus-driver will call:
+ * i2c_recover_bus() which will unstuck the I2C-bus. Note the
+ * unstuck-ing of the I2C bus only works if we first drop the
+ * chip off the bus by turning it off.
+ * 3. Turn the chip back on.
+ *
+ * On the x86/ACPI systems were this problem is seen, step 1. and
+ * 3. require making ACPI calls and dealing with ACPI Power
+ * Resources. The workaround below runtime-suspends the chip to
+ * turn it off, leaving it up to the ACPI subsystem to deal with
+ * this.
+ */
+
+ if (device_property_read_bool(&client->dev,
+ "silead,stuck-controller-bug")) {
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_enable(&client->dev);
+ pm_runtime_allow(&client->dev);
+
+ pm_runtime_suspend(&client->dev);
+
+ dev_warn(&client->dev, FW_BUG "Stuck I2C bus: please ignore the next 'controller timed out' error\n");
+ silead_ts_get_id(client);
+
+ /* The forbid will also resume the device */
+ pm_runtime_forbid(&client->dev);
+ pm_runtime_disable(&client->dev);
+ }
+
silead_ts_set_power(client, SILEAD_POWER_OFF);
silead_ts_set_power(client, SILEAD_POWER_ON);
error = silead_ts_get_id(client);
- if (error)
+ if (error) {
+ dev_err(&client->dev, "Chip ID read error %d\n", error);
return error;
+ }
error = silead_ts_init(client);
if (error)
@@ -486,7 +522,7 @@ static int silead_ts_probe(struct i2c_client *client,
silead_ts_read_props(client);
- /* We must have the IRQ provided by DT or ACPI subsytem */
+ /* We must have the IRQ provided by DT or ACPI subsystem */
if (client->irq <= 0)
return -ENODEV;
diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index 9a64e1dbc04a..bc11203c9cf7 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -691,10 +691,9 @@ static int stmfts_probe(struct i2c_client *client,
* interrupts. To be on the safe side it's better to not enable
* the interrupts during their request.
*/
- irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
err = devm_request_threaded_irq(&client->dev, client->irq,
NULL, stmfts_irq_handler,
- IRQF_ONESHOT,
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
"stmfts_irq", sdata);
if (err)
return err;
diff --git a/drivers/input/touchscreen/tsc2007.h b/drivers/input/touchscreen/tsc2007.h
index 91c60bf6dcaf..69b08dd6c8df 100644
--- a/drivers/input/touchscreen/tsc2007.h
+++ b/drivers/input/touchscreen/tsc2007.h
@@ -19,6 +19,8 @@
#ifndef _TSC2007_H
#define _TSC2007_H
+struct gpio_desc;
+
#define TSC2007_MEASURE_TEMP0 (0x0 << 4)
#define TSC2007_MEASURE_AUX (0x2 << 4)
#define TSC2007_MEASURE_TEMP1 (0x4 << 4)
@@ -69,7 +71,7 @@ struct tsc2007 {
int fuzzy;
int fuzzz;
- unsigned int gpio;
+ struct gpio_desc *gpiod;
int irq;
wait_queue_head_t wait;
diff --git a/drivers/input/touchscreen/tsc2007_core.c b/drivers/input/touchscreen/tsc2007_core.c
index 3b80abfc1eca..3e871d182c40 100644
--- a/drivers/input/touchscreen/tsc2007_core.c
+++ b/drivers/input/touchscreen/tsc2007_core.c
@@ -19,11 +19,12 @@
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
-#include <linux/of_device.h>
-#include <linux/of_gpio.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
#include <linux/platform_data/tsc2007.h>
#include "tsc2007.h"
@@ -220,71 +221,58 @@ static void tsc2007_close(struct input_dev *input_dev)
tsc2007_stop(ts);
}
-#ifdef CONFIG_OF
static int tsc2007_get_pendown_state_gpio(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct tsc2007 *ts = i2c_get_clientdata(client);
- return !gpio_get_value(ts->gpio);
+ return gpiod_get_value(ts->gpiod);
}
-static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts)
+static int tsc2007_probe_properties(struct device *dev, struct tsc2007 *ts)
{
- struct device_node *np = client->dev.of_node;
u32 val32;
u64 val64;
- if (!np) {
- dev_err(&client->dev, "missing device tree data\n");
- return -EINVAL;
- }
-
- if (!of_property_read_u32(np, "ti,max-rt", &val32))
+ if (!device_property_read_u32(dev, "ti,max-rt", &val32))
ts->max_rt = val32;
else
ts->max_rt = MAX_12BIT;
- if (!of_property_read_u32(np, "ti,fuzzx", &val32))
+ if (!device_property_read_u32(dev, "ti,fuzzx", &val32))
ts->fuzzx = val32;
- if (!of_property_read_u32(np, "ti,fuzzy", &val32))
+ if (!device_property_read_u32(dev, "ti,fuzzy", &val32))
ts->fuzzy = val32;
- if (!of_property_read_u32(np, "ti,fuzzz", &val32))
+ if (!device_property_read_u32(dev, "ti,fuzzz", &val32))
ts->fuzzz = val32;
- if (!of_property_read_u64(np, "ti,poll-period", &val64))
+ if (!device_property_read_u64(dev, "ti,poll-period", &val64))
ts->poll_period = msecs_to_jiffies(val64);
else
ts->poll_period = msecs_to_jiffies(1);
- if (!of_property_read_u32(np, "ti,x-plate-ohms", &val32)) {
+ if (!device_property_read_u32(dev, "ti,x-plate-ohms", &val32)) {
ts->x_plate_ohms = val32;
} else {
- dev_err(&client->dev, "missing ti,x-plate-ohms devicetree property.");
+ dev_err(dev, "Missing ti,x-plate-ohms device property\n");
return -EINVAL;
}
- ts->gpio = of_get_gpio(np, 0);
- if (gpio_is_valid(ts->gpio))
+ ts->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
+ if (IS_ERR(ts->gpiod))
+ return PTR_ERR(ts->gpiod);
+
+ if (ts->gpiod)
ts->get_pendown_state = tsc2007_get_pendown_state_gpio;
else
- dev_warn(&client->dev,
- "GPIO not specified in DT (of_get_gpio returned %d)\n",
- ts->gpio);
+ dev_warn(dev, "Pen down GPIO is not specified in properties\n");
return 0;
}
-#else
-static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts)
-{
- dev_err(&client->dev, "platform data is required!\n");
- return -EINVAL;
-}
-#endif
-static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts,
+static int tsc2007_probe_pdev(struct device *dev, struct tsc2007 *ts,
const struct tsc2007_platform_data *pdata,
const struct i2c_device_id *id)
{
@@ -299,7 +287,7 @@ static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts,
ts->fuzzz = pdata->fuzzz;
if (pdata->x_plate_ohms == 0) {
- dev_err(&client->dev, "x_plate_ohms is not set up in platform data");
+ dev_err(dev, "x_plate_ohms is not set up in platform data\n");
return -EINVAL;
}
@@ -332,9 +320,9 @@ static int tsc2007_probe(struct i2c_client *client,
return -ENOMEM;
if (pdata)
- err = tsc2007_probe_pdev(client, ts, pdata, id);
+ err = tsc2007_probe_pdev(&client->dev, ts, pdata, id);
else
- err = tsc2007_probe_dt(client, ts);
+ err = tsc2007_probe_properties(&client->dev, ts);
if (err)
return err;
@@ -431,18 +419,16 @@ static const struct i2c_device_id tsc2007_idtable[] = {
MODULE_DEVICE_TABLE(i2c, tsc2007_idtable);
-#ifdef CONFIG_OF
static const struct of_device_id tsc2007_of_match[] = {
{ .compatible = "ti,tsc2007" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, tsc2007_of_match);
-#endif
static struct i2c_driver tsc2007_driver = {
.driver = {
.name = "tsc2007",
- .of_match_table = of_match_ptr(tsc2007_of_match),
+ .of_match_table = tsc2007_of_match,
},
.id_table = tsc2007_idtable,
.probe = tsc2007_probe,
diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
index 1afc6bde2891..22826c387da5 100644
--- a/drivers/input/touchscreen/wacom_i2c.c
+++ b/drivers/input/touchscreen/wacom_i2c.c
@@ -145,15 +145,16 @@ static void wacom_i2c_close(struct input_dev *dev)
}
static int wacom_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+ const struct i2c_device_id *id)
{
+ struct device *dev = &client->dev;
struct wacom_i2c *wac_i2c;
struct input_dev *input;
struct wacom_features features = { 0 };
int error;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
- dev_err(&client->dev, "i2c_check_functionality error\n");
+ dev_err(dev, "i2c_check_functionality error\n");
return -EIO;
}
@@ -161,21 +162,22 @@ static int wacom_i2c_probe(struct i2c_client *client,
if (error)
return error;
- wac_i2c = kzalloc(sizeof(*wac_i2c), GFP_KERNEL);
- input = input_allocate_device();
- if (!wac_i2c || !input) {
- error = -ENOMEM;
- goto err_free_mem;
- }
+ wac_i2c = devm_kzalloc(dev, sizeof(*wac_i2c), GFP_KERNEL);
+ if (!wac_i2c)
+ return -ENOMEM;
wac_i2c->client = client;
+
+ input = devm_input_allocate_device(dev);
+ if (!input)
+ return -ENOMEM;
+
wac_i2c->input = input;
input->name = "Wacom I2C Digitizer";
input->id.bustype = BUS_I2C;
input->id.vendor = 0x56a;
input->id.version = features.fw_version;
- input->dev.parent = &client->dev;
input->open = wacom_i2c_open;
input->close = wacom_i2c_close;
@@ -194,13 +196,11 @@ static int wacom_i2c_probe(struct i2c_client *client,
input_set_drvdata(input, wac_i2c);
- error = request_threaded_irq(client->irq, NULL, wacom_i2c_irq,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- "wacom_i2c", wac_i2c);
+ error = devm_request_threaded_irq(dev, client->irq, NULL, wacom_i2c_irq,
+ IRQF_ONESHOT, "wacom_i2c", wac_i2c);
if (error) {
- dev_err(&client->dev,
- "Failed to enable IRQ, error: %d\n", error);
- goto err_free_mem;
+ dev_err(dev, "Failed to request IRQ: %d\n", error);
+ return error;
}
/* Disable the IRQ, we'll enable it in wac_i2c_open() */
@@ -208,31 +208,10 @@ static int wacom_i2c_probe(struct i2c_client *client,
error = input_register_device(wac_i2c->input);
if (error) {
- dev_err(&client->dev,
- "Failed to register input device, error: %d\n", error);
- goto err_free_irq;
+ dev_err(dev, "Failed to register input device: %d\n", error);
+ return error;
}
- i2c_set_clientdata(client, wac_i2c);
- return 0;
-
-err_free_irq:
- free_irq(client->irq, wac_i2c);
-err_free_mem:
- input_free_device(input);
- kfree(wac_i2c);
-
- return error;
-}
-
-static int wacom_i2c_remove(struct i2c_client *client)
-{
- struct wacom_i2c *wac_i2c = i2c_get_clientdata(client);
-
- free_irq(client->irq, wac_i2c);
- input_unregister_device(wac_i2c->input);
- kfree(wac_i2c);
-
return 0;
}
@@ -269,7 +248,6 @@ static struct i2c_driver wacom_i2c_driver = {
},
.probe = wacom_i2c_probe,
- .remove = wacom_i2c_remove,
.id_table = wacom_i2c_id,
};
module_i2c_driver(wacom_i2c_driver);
diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c
index bb1699e0d3c7..319f57fb9af5 100644
--- a/drivers/input/touchscreen/wm831x-ts.c
+++ b/drivers/input/touchscreen/wm831x-ts.c
@@ -317,14 +317,13 @@ static int wm831x_ts_probe(struct platform_device *pdev)
error = request_threaded_irq(wm831x_ts->data_irq,
NULL, wm831x_ts_data_irq,
- irqf | IRQF_ONESHOT,
+ irqf | IRQF_ONESHOT | IRQF_NO_AUTOEN,
"Touchscreen data", wm831x_ts);
if (error) {
dev_err(&pdev->dev, "Failed to request data IRQ %d: %d\n",
wm831x_ts->data_irq, error);
goto err_alloc;
}
- disable_irq(wm831x_ts->data_irq);
if (pdata && pdata->pd_irqf)
irqf = pdata->pd_irqf;
diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c
index 3b636beb583c..b8d901099378 100644
--- a/drivers/input/touchscreen/zinitix.c
+++ b/drivers/input/touchscreen/zinitix.c
@@ -513,10 +513,10 @@ static int zinitix_ts_probe(struct i2c_client *client)
return -EINVAL;
}
- irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
error = devm_request_threaded_irq(&client->dev, client->irq,
NULL, zinitix_ts_irq_handler,
- IRQF_ONESHOT, client->name, bt541);
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
+ client->name, bt541);
if (error) {
dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
return error;