Merge tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC and MEMSTICK updates from Ulf Hansson:
 "MMC core:
   - Return a proper response in case of an ioctl error
   - Issue HPI to interrupt BKOPS for eMMC if it timed out
   - Avoid hogging the CPU while polling for busy
   - Extend sd8787 pwrseq to support the wilc1000 SDIO
   - Remove a couple of confusing warning messages
   - Clarify comment for ->card_busy() host ops

  MMC host:
   - dw_mmc: Add data CRC error injection
   - mmci: De-assert reset during ->probe()
   - rtsx_pci: Fix long reads when clock is pre-scaled
   - sdhci: Correct the tuning command handle for PIO mode
   - sdhci-esdhc-imx: Improve support for auto tuning
   - sdhci-msm: Add support for the sc7280
   - sdhci-of-arasan: Don't auto tune for DDR50 mode for ZynqMP
   - sdhci-of-arasan: Enable support for auto cmd12
   - sdhci-of-arasan: Use 19MHz for SD default speed for ZynqMP for level shifter
   - usdhi6rol0: Implement the ->card_busy() host ops

  MEMSTICK:
   - A couple of minor cleanups"

* tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits)
  mmc: queue: Remove unused parameters(request_queue)
  mmc: pwrseq: sd8787: fix compilation warning
  mmc: core: Return correct emmc response in case of ioctl error
  mmc: sdhci-esdhc-imx: Select the correct mode for auto tuning
  mmc: sdhci-esdhc-imx: Remove redundant code for manual tuning
  mmc: core: Issue HPI in case the BKOPS timed out
  mmc: queue: Match the data type of max_segments
  mmc: switch from 'pci_' to 'dma_' API
  memstick: switch from 'pci_' to 'dma_' API
  memstick: r592: Change the name of the 'pci_driver' structure to be consistent
  mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787
  mmc: pwrseq: sd8787: add support for wilc1000
  dt-bindings: mmc: Extend pwrseq-sd8787 binding for wilc1000
  dt-bindings: mmc: fsl-imx-esdhc: change the pinctrl-names rule
  dt-bindings: mmc: fsl-imx-esdhc: add a new compatible string
  dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings
  dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning
  mmc: core: Update ->card_busy() callback comment
  mmc: usdhi6rol0: Implement card_busy function
  mmc: sdhci: Correct the tuning command handle for PIO mode
  ...

1 files changed, 0 insertions, 42 deletions

diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
deleted file mode 100644
index cba1184b364c..000000000000
--- a/include/linux/platform_data/mmc-esdhc-imx.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2010 Wolfram Sang <kernel@pengutronix.de>
- */
-
-#ifndef __ASM_ARCH_IMX_ESDHC_H
-#define __ASM_ARCH_IMX_ESDHC_H
-
-#include <linux/types.h>
-
-enum wp_types {
-	ESDHC_WP_NONE,		/* no WP, neither controller nor gpio */
-	ESDHC_WP_CONTROLLER,	/* mmc controller internal WP */
-	ESDHC_WP_GPIO,		/* external gpio pin for WP */
-};
-
-enum cd_types {
-	ESDHC_CD_NONE,		/* no CD, neither controller nor gpio */
-	ESDHC_CD_CONTROLLER,	/* mmc controller internal CD */
-	ESDHC_CD_GPIO,		/* external gpio pin for CD */
-	ESDHC_CD_PERMANENT,	/* no CD, card permanently wired to host */
-};
-
-/**
- * struct esdhc_platform_data - platform data for esdhc on i.MX
- *
- * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
- *
- * @wp_type:	type of write_protect method (see wp_types enum above)
- * @cd_type:	type of card_detect method (see cd_types enum above)
- */
-
-struct esdhc_platform_data {
-	enum wp_types wp_type;
-	enum cd_types cd_type;
-	int max_bus_width;
-	unsigned int delay_line;
-	unsigned int tuning_step;       /* The delay cell steps in tuning procedure */
-	unsigned int tuning_start_tap;	/* The start delay cell point in tuning procedure */
-	unsigned int strobe_dll_delay_target;	/* The delay cell for strobe pad (read clock) */
-};
-#endif /* __ASM_ARCH_IMX_ESDHC_H */