summaryrefslogtreecommitdiff
path: root/include/linux/sfp.h
diff options
context:
space:
mode:
authorAndrew Lunn <andrew@lunn.ch>2018-07-17 22:48:13 +0300
committerDavid S. Miller <davem@davemloft.net>2018-07-18 04:02:02 +0300
commit1323061a018a7514287894a552c4ec2a5f0cb0cd (patch)
tree91dbd6f546d779158a89d37828288db51827ad34 /include/linux/sfp.h
parentdcb5d0fcaa1ddd0af9c18ef51e6b05e38a6cec71 (diff)
downloadlinux-1323061a018a7514287894a552c4ec2a5f0cb0cd.tar.xz
net: phy: sfp: Add HWMON support for module sensors
SFP modules can contain a number of sensors. The EEPROM also contains recommended alarm and critical values for each sensor, and indications of if these have been exceeded. Export this information via HWMON. Currently temperature, VCC, bias current, transmit power, and possibly receiver power is supported. The sensors in the modules can either return calibrate or uncalibrated values. Uncalibrated values need to be manipulated, using coefficients provided in the SFP EEPROM. Uncalibrated receive power values require floating point maths in order to calibrate them. Performing this in the kernel is hard. So if the SFP module indicates it uses uncalibrated values, RX power is not made available. With this hwmon device, it is possible to view the sensor values using lm-sensors programs: in0: +3.29 V (crit min = +2.90 V, min = +3.00 V) (max = +3.60 V, crit max = +3.70 V) temp1: +33.0°C (low = -5.0°C, high = +80.0°C) (crit low = -10.0°C, crit = +85.0°C) power1: 1000.00 nW (max = 794.00 uW, min = 50.00 uW) ALARM (LCRIT) (lcrit = 40.00 uW, crit = 1000.00 uW) curr1: +0.00 A (crit min = +0.00 A, min = +0.00 A) ALARM (LCRIT, MIN) (max = +0.01 A, crit max = +0.01 A) The scaling sensors performs on the bias current is not particularly good. The raw values are more useful: curr1: curr1_input: 0.000 curr1_min: 0.002 curr1_max: 0.010 curr1_lcrit: 0.000 curr1_crit: 0.011 curr1_min_alarm: 1.000 curr1_max_alarm: 0.000 curr1_lcrit_alarm: 1.000 curr1_crit_alarm: 0.000 In order to keep the I2C overhead to a minimum, the constant values, such as limits and calibration coefficients are read once at module insertion time. Thus only reading *_input and *_alarm properties requires i2c read operations. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include/linux/sfp.h')
-rw-r--r--include/linux/sfp.h72
1 files changed, 71 insertions, 1 deletions
diff --git a/include/linux/sfp.h b/include/linux/sfp.h
index ebce9e24906a..d37518e89db2 100644
--- a/include/linux/sfp.h
+++ b/include/linux/sfp.h
@@ -231,6 +231,50 @@ struct sfp_eeprom_id {
struct sfp_eeprom_ext ext;
} __packed;
+struct sfp_diag {
+ __be16 temp_high_alarm;
+ __be16 temp_low_alarm;
+ __be16 temp_high_warn;
+ __be16 temp_low_warn;
+ __be16 volt_high_alarm;
+ __be16 volt_low_alarm;
+ __be16 volt_high_warn;
+ __be16 volt_low_warn;
+ __be16 bias_high_alarm;
+ __be16 bias_low_alarm;
+ __be16 bias_high_warn;
+ __be16 bias_low_warn;
+ __be16 txpwr_high_alarm;
+ __be16 txpwr_low_alarm;
+ __be16 txpwr_high_warn;
+ __be16 txpwr_low_warn;
+ __be16 rxpwr_high_alarm;
+ __be16 rxpwr_low_alarm;
+ __be16 rxpwr_high_warn;
+ __be16 rxpwr_low_warn;
+ __be16 laser_temp_high_alarm;
+ __be16 laser_temp_low_alarm;
+ __be16 laser_temp_high_warn;
+ __be16 laser_temp_low_warn;
+ __be16 tec_cur_high_alarm;
+ __be16 tec_cur_low_alarm;
+ __be16 tec_cur_high_warn;
+ __be16 tec_cur_low_warn;
+ __be32 cal_rxpwr4;
+ __be32 cal_rxpwr3;
+ __be32 cal_rxpwr2;
+ __be32 cal_rxpwr1;
+ __be32 cal_rxpwr0;
+ __be16 cal_txi_slope;
+ __be16 cal_txi_offset;
+ __be16 cal_txpwr_slope;
+ __be16 cal_txpwr_offset;
+ __be16 cal_t_slope;
+ __be16 cal_t_offset;
+ __be16 cal_v_slope;
+ __be16 cal_v_offset;
+} __packed;
+
/* SFP EEPROM registers */
enum {
SFP_PHYS_ID = 0x00,
@@ -384,7 +428,33 @@ enum {
SFP_TEC_CUR = 0x6c,
SFP_STATUS = 0x6e,
- SFP_ALARM = 0x70,
+ SFP_ALARM0 = 0x70,
+ SFP_ALARM0_TEMP_HIGH = BIT(7),
+ SFP_ALARM0_TEMP_LOW = BIT(6),
+ SFP_ALARM0_VCC_HIGH = BIT(5),
+ SFP_ALARM0_VCC_LOW = BIT(4),
+ SFP_ALARM0_TX_BIAS_HIGH = BIT(3),
+ SFP_ALARM0_TX_BIAS_LOW = BIT(2),
+ SFP_ALARM0_TXPWR_HIGH = BIT(1),
+ SFP_ALARM0_TXPWR_LOW = BIT(0),
+
+ SFP_ALARM1 = 0x71,
+ SFP_ALARM1_RXPWR_HIGH = BIT(7),
+ SFP_ALARM1_RXPWR_LOW = BIT(6),
+
+ SFP_WARN0 = 0x74,
+ SFP_WARN0_TEMP_HIGH = BIT(7),
+ SFP_WARN0_TEMP_LOW = BIT(6),
+ SFP_WARN0_VCC_HIGH = BIT(5),
+ SFP_WARN0_VCC_LOW = BIT(4),
+ SFP_WARN0_TX_BIAS_HIGH = BIT(3),
+ SFP_WARN0_TX_BIAS_LOW = BIT(2),
+ SFP_WARN0_TXPWR_HIGH = BIT(1),
+ SFP_WARN0_TXPWR_LOW = BIT(0),
+
+ SFP_WARN1 = 0x75,
+ SFP_WARN1_RXPWR_HIGH = BIT(7),
+ SFP_WARN1_RXPWR_LOW = BIT(6),
SFP_EXT_STATUS = 0x76,
SFP_VSL = 0x78,