Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Support offloading wireless authentication to userspace via
    NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari.

 2) A lot of work on network namespace setup/teardown from Kirill Tkhai.
    Setup and cleanup of namespaces now all run asynchronously and thus
    performance is significantly increased.

 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon
    Streiff.

 4) Support zerocopy on RDS sockets, from Sowmini Varadhan.

 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel
    Borkmann.

 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime
    Chevallier.

 7) Support grafting of child qdiscs in mlxsw driver, from Nogah
    Frankel.

 8) Add packet forwarding tests to selftests, from Ido Schimmel.

 9) Deal with sub-optimal GSO packets better in BBR congestion control,
    from Eric Dumazet.

10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern.

11) Add path MTU tests to selftests, from Stefano Brivio.

12) Various bits of IPSEC offloading support for mlx5, from Aviad
    Yehezkel, Yossi Kuperman, and Saeed Mahameed.

13) Support RSS spreading on ntuple filters in SFC driver, from Edward
    Cree.

14) Lots of sockmap work from John Fastabend. Applications can use eBPF
    to filter sendmsg and sendpage operations.

15) In-kernel receive TLS support, from Dave Watson.

16) Add XDP support to ixgbevf, this is significant because it should
    allow optimized XDP usage in various cloud environments. From Tony
    Nguyen.

17) Add new Intel E800 series "ice" ethernet driver, from Anirudh
    Venkataramanan et al.

18) IP fragmentation match offload support in nfp driver, from Pieter
    Jansen van Vuuren.

19) Support XDP redirect in i40e driver, from Björn Töpel.

20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of
    tracepoints in their raw form, from Alexei Starovoitov.

21) Lots of striding RQ improvements to mlx5 driver with many
    performance improvements, from Tariq Toukan.

22) Use rhashtable for inet frag reassembly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits)
  net: mvneta: improve suspend/resume
  net: mvneta: split rxq/txq init and txq deinit into SW and HW parts
  ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh
  net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
  net: bgmac: Correctly annotate register space
  route: check sysctl_fib_multipath_use_neigh earlier than hash
  fix typo in command value in drivers/net/phy/mdio-bitbang.
  sky2: Increase D3 delay to sky2 stops working after suspend
  net/mlx5e: Set EQE based as default TX interrupt moderation mode
  ibmvnic: Disable irqs before exiting reset from closed state
  net: sched: do not emit messages while holding spinlock
  vlan: also check phy_driver ts_info for vlan's real device
  Bluetooth: Mark expected switch fall-throughs
  Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME
  Bluetooth: btrsi: remove unused including <linux/version.h>
  Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4
  sh_eth: kill useless check in __sh_eth_get_regs()
  sh_eth: add sh_eth_cpu_data::no_xdfar flag
  ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()
  ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()
  ...

1 files changed, 22 insertions, 0 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 2b581bd93812..d2279b2d61aa 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -6,6 +6,7 @@
  * Copyright 2007-2010	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014  Intel Mobile Communications GmbH
  * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
+ * Copyright (C) 2018        Intel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -301,6 +302,8 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_MU_GROUPS: VHT MU-MIMO group id or user position changed
  * @BSS_CHANGED_KEEP_ALIVE: keep alive options (idle period or protected
  *	keep alive) changed.
+ * @BSS_CHANGED_MCAST_RATE: Multicast Rate setting changed for this interface
+ *
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -328,6 +331,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_OCB                 = 1<<22,
 	BSS_CHANGED_MU_GROUPS		= 1<<23,
 	BSS_CHANGED_KEEP_ALIVE		= 1<<24,
+	BSS_CHANGED_MCAST_RATE		= 1<<25,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -934,6 +938,7 @@ struct ieee80211_tx_info {
 			u8 ampdu_len;
 			u8 antenna;
 			u16 tx_time;
+			bool is_valid_ack_signal;
 			void *status_driver_data[19 / sizeof(void *)];
 		} status;
 		struct {
@@ -1098,6 +1103,9 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	the first subframe.
  * @RX_FLAG_ICV_STRIPPED: The ICV is stripped from this frame. CRC checking must
  *	be done in the hardware.
+ * @RX_FLAG_AMPDU_EOF_BIT: Value of the EOF bit in the A-MPDU delimiter for this
+ *	frame
+ * @RX_FLAG_AMPDU_EOF_BIT_KNOWN: The EOF value is known
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR		= BIT(0),
@@ -1124,6 +1132,8 @@ enum mac80211_rx_flags {
 	RX_FLAG_MIC_STRIPPED		= BIT(21),
 	RX_FLAG_ALLOW_SAME_PN		= BIT(22),
 	RX_FLAG_ICV_STRIPPED		= BIT(23),
+	RX_FLAG_AMPDU_EOF_BIT		= BIT(24),
+	RX_FLAG_AMPDU_EOF_BIT_KNOWN	= BIT(25),
 };
 
 /**
@@ -2063,6 +2073,14 @@ struct ieee80211_txq {
  * @IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA: Hardware supports buffer STA on
  *	TDLS links.
  *
+ * @IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP: The driver requires the
+ *	mgd_prepare_tx() callback to be called before transmission of a
+ *	deauthentication frame in case the association was completed but no
+ *	beacon was heard. This is required in multi-channel scenarios, where the
+ *	virtual interface might not be given air time for the transmission of
+ *	the frame, as it is not synced with the AP/P2P GO yet, and thus the
+ *	deauthentication frame might not be transmitted.
+ >
  * @IEEE80211_HW_DOESNT_SUPPORT_QOS_NDP: The driver (or firmware) doesn't
  *	support QoS NDP for AP probing - that's most likely a driver bug.
  *
@@ -2109,6 +2127,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_REPORTS_LOW_ACK,
 	IEEE80211_HW_SUPPORTS_TX_FRAG,
 	IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA,
+	IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP,
 	IEEE80211_HW_DOESNT_SUPPORT_QOS_NDP,
 
 	/* keep last, obviously */
@@ -3354,6 +3373,9 @@ enum ieee80211_reconfig_type {
  *	management frame prior to having successfully associated to allow the
  *	driver to give it channel time for the transmission, to get a response
  *	and to be able to synchronize with the GO.
+ *	For drivers that set %IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP, mac80211
+ *	would also call this function before transmitting a deauthentication
+ *	frame in case that no beacon was heard from the AP/P2P GO.
  *	The callback will be called before each transmission and upon return
  *	mac80211 will transmit the frame right away.
  *	The callback is optional and can (should!) sleep.