diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-11-15 03:49:31 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-11-15 03:49:31 +0300 |
commit | 23c258763ba992f6a95a4b8980ffa7c1890bc8d8 (patch) | |
tree | 7f089cb2c2a3f01ff071bca2dc9cc4e2b939a8c4 /include | |
parent | e0ca3826b147a7ada526856af25a87c8ffad489f (diff) | |
parent | cecd5fc5512349662b9e7a9e06231055d803e3f6 (diff) | |
download | linux-23c258763ba992f6a95a4b8980ffa7c1890bc8d8.tar.xz |
Merge tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"Updates for this cycle include:
- new driver for Spreadtrum dma controller, ST MDMA and DMAMUX
controllers
- PM support for IMG MDC drivers
- updates to bcm-sba-raid driver and improvements to sun6i driver
- subsystem conversion for:
- timers to use timer_setup()
- remove usage of PCI pool API
- usage of %p format specifier
- minor updates to bunch of drivers"
* tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (49 commits)
dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type
dmaengine: dmatest: warn user when dma test times out
dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue"
dmaengine: stm32_mdma: activate pack/unpack feature
dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %pad
dmaengine: coh901318: Remove unnecessary 0x prefixes before %pad
MAINTAINERS: Step down from a co-maintaner of DW DMAC driver
dmaengine: pch_dma: Replace PCI pool old API
dmaengine: Convert timers to use timer_setup()
dmaengine: sprd: Add Spreadtrum DMA driver
dt-bindings: dmaengine: Add Spreadtrum SC9860 DMA controller
dmaengine: sun6i: Retrieve channel count/max request from devicetree
dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs
dmaengine: bcm-sba-raid: Use common GPL comment header
dmaengine: bcm-sba-raid: Use only single mailbox channel
dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lock
dmaengine: pl330: fix descriptor allocation fail
dmaengine: rcar-dmac: use TCRB instead of TCR for residue
dmaengine: sun6i: Add support for Allwinner A64 and compatibles
arm64: allwinner: a64: Add devicetree binding for DMA controller
...
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/dma/xilinx_dma.h | 14 | ||||
-rw-r--r-- | include/linux/dmaengine.h | 30 |
2 files changed, 17 insertions, 27 deletions
diff --git a/include/linux/dma/xilinx_dma.h b/include/linux/dma/xilinx_dma.h index 3ae300052553..34b98f276ed0 100644 --- a/include/linux/dma/xilinx_dma.h +++ b/include/linux/dma/xilinx_dma.h @@ -41,20 +41,6 @@ struct xilinx_vdma_config { int ext_fsync; }; -/** - * enum xdma_ip_type: DMA IP type. - * - * XDMA_TYPE_AXIDMA: Axi dma ip. - * XDMA_TYPE_CDMA: Axi cdma ip. - * XDMA_TYPE_VDMA: Axi vdma ip. - * - */ -enum xdma_ip_type { - XDMA_TYPE_AXIDMA = 0, - XDMA_TYPE_CDMA, - XDMA_TYPE_VDMA, -}; - int xilinx_vdma_channel_set_config(struct dma_chan *dchan, struct xilinx_vdma_config *cfg); diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 8319101170fc..f838764993eb 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -329,7 +329,7 @@ enum dma_slave_buswidth { * @src_addr_width: this is the width in bytes of the source (RX) * register where DMA data shall be read. If the source * is memory this may be ignored depending on architecture. - * Legal values: 1, 2, 4, 8. + * Legal values: 1, 2, 3, 4, 8, 16, 32, 64. * @dst_addr_width: same as src_addr_width but for destination * target (TX) mutatis mutandis. * @src_maxburst: the maximum number of words (note: words, as in @@ -404,14 +404,16 @@ enum dma_residue_granularity { DMA_RESIDUE_GRANULARITY_BURST = 2, }; -/* struct dma_slave_caps - expose capabilities of a slave channel only - * - * @src_addr_widths: bit mask of src addr widths the channel supports - * @dst_addr_widths: bit mask of dstn addr widths the channel supports - * @directions: bit mask of slave direction the channel supported - * since the enum dma_transfer_direction is not defined as bits for each - * type of direction, the dma controller should fill (1 << <TYPE>) and same - * should be checked by controller as well +/** + * struct dma_slave_caps - expose capabilities of a slave channel only + * @src_addr_widths: bit mask of src addr widths the channel supports. + * Width is specified in bytes, e.g. for a channel supporting + * a width of 4 the mask should have BIT(4) set. + * @dst_addr_widths: bit mask of dst addr widths the channel supports + * @directions: bit mask of slave directions the channel supports. + * Since the enum dma_transfer_direction is not defined as bit flag for + * each type, the dma controller should set BIT(<TYPE>) and same + * should be checked by controller as well * @max_burst: max burst capability per-transfer * @cmd_pause: true, if pause and thereby resume is supported * @cmd_terminate: true, if terminate cmd is supported @@ -678,11 +680,13 @@ struct dma_filter { * @dev_id: unique device ID * @dev: struct device reference for dma mapping api * @src_addr_widths: bit mask of src addr widths the device supports + * Width is specified in bytes, e.g. for a device supporting + * a width of 4 the mask should have BIT(4) set. * @dst_addr_widths: bit mask of dst addr widths the device supports - * @directions: bit mask of slave direction the device supports since - * the enum dma_transfer_direction is not defined as bits for - * each type of direction, the dma controller should fill (1 << - * <TYPE>) and same should be checked by controller as well + * @directions: bit mask of slave directions the device supports. + * Since the enum dma_transfer_direction is not defined as bit flag for + * each type, the dma controller should set BIT(<TYPE>) and same + * should be checked by controller as well * @max_burst: max burst capability per-transfer * @residue_granularity: granularity of the transfer residue reported * by tx_status |