Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

1 files changed, 1 insertions, 246 deletions

diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c
index 0ecaf1bb0068..e4455babe4c2 100644
--- a/net/batman-adv/bat_v.c
+++ b/net/batman-adv/bat_v.c
@@ -13,14 +13,13 @@
 #include <linux/if_ether.h>
 #include <linux/init.h>
 #include <linux/jiffies.h>
-#include <linux/kernel.h>
 #include <linux/kref.h>
 #include <linux/list.h>
+#include <linux/minmax.h>
 #include <linux/netdevice.h>
 #include <linux/netlink.h>
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
-#include <linux/seq_file.h>
 #include <linux/skbuff.h>
 #include <linux/spinlock.h>
 #include <linux/stddef.h>
@@ -119,92 +118,6 @@ batadv_v_hardif_neigh_init(struct batadv_hardif_neigh_node *hardif_neigh)
 		  batadv_v_elp_throughput_metric_update);
 }
 
-#ifdef CONFIG_BATMAN_ADV_DEBUGFS
-/**
- * batadv_v_orig_print_neigh() - print neighbors for the originator table
- * @orig_node: the orig_node for which the neighbors are printed
- * @if_outgoing: outgoing interface for these entries
- * @seq: debugfs table seq_file struct
- *
- * Must be called while holding an rcu lock.
- */
-static void
-batadv_v_orig_print_neigh(struct batadv_orig_node *orig_node,
-			  struct batadv_hard_iface *if_outgoing,
-			  struct seq_file *seq)
-{
-	struct batadv_neigh_node *neigh_node;
-	struct batadv_neigh_ifinfo *n_ifinfo;
-
-	hlist_for_each_entry_rcu(neigh_node, &orig_node->neigh_list, list) {
-		n_ifinfo = batadv_neigh_ifinfo_get(neigh_node, if_outgoing);
-		if (!n_ifinfo)
-			continue;
-
-		seq_printf(seq, " %pM (%9u.%1u)",
-			   neigh_node->addr,
-			   n_ifinfo->bat_v.throughput / 10,
-			   n_ifinfo->bat_v.throughput % 10);
-
-		batadv_neigh_ifinfo_put(n_ifinfo);
-	}
-}
-
-/**
- * batadv_v_hardif_neigh_print() - print a single ELP neighbour node
- * @seq: neighbour table seq_file struct
- * @hardif_neigh: hardif neighbour information
- */
-static void
-batadv_v_hardif_neigh_print(struct seq_file *seq,
-			    struct batadv_hardif_neigh_node *hardif_neigh)
-{
-	int last_secs, last_msecs;
-	u32 throughput;
-
-	last_secs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen) / 1000;
-	last_msecs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen) % 1000;
-	throughput = ewma_throughput_read(&hardif_neigh->bat_v.throughput);
-
-	seq_printf(seq, "%pM %4i.%03is (%9u.%1u) [%10s]\n",
-		   hardif_neigh->addr, last_secs, last_msecs, throughput / 10,
-		   throughput % 10, hardif_neigh->if_incoming->net_dev->name);
-}
-
-/**
- * batadv_v_neigh_print() - print the single hop neighbour list
- * @bat_priv: the bat priv with all the soft interface information
- * @seq: neighbour table seq_file struct
- */
-static void batadv_v_neigh_print(struct batadv_priv *bat_priv,
-				 struct seq_file *seq)
-{
-	struct net_device *net_dev = (struct net_device *)seq->private;
-	struct batadv_hardif_neigh_node *hardif_neigh;
-	struct batadv_hard_iface *hard_iface;
-	int batman_count = 0;
-
-	seq_puts(seq,
-		 "  Neighbor        last-seen ( throughput) [        IF]\n");
-
-	rcu_read_lock();
-	list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) {
-		if (hard_iface->soft_iface != net_dev)
-			continue;
-
-		hlist_for_each_entry_rcu(hardif_neigh,
-					 &hard_iface->neigh_list, list) {
-			batadv_v_hardif_neigh_print(seq, hardif_neigh);
-			batman_count++;
-		}
-	}
-	rcu_read_unlock();
-
-	if (batman_count == 0)
-		seq_puts(seq, "No batman nodes in range ...\n");
-}
-#endif
-
 /**
  * batadv_v_neigh_dump_neigh() - Dump a neighbour into a message
  * @msg: Netlink message to dump into
@@ -337,75 +250,6 @@ batadv_v_neigh_dump(struct sk_buff *msg, struct netlink_callback *cb,
 	cb->args[1] = idx;
 }
 
-#ifdef CONFIG_BATMAN_ADV_DEBUGFS
-/**
- * batadv_v_orig_print() - print the originator table
- * @bat_priv: the bat priv with all the soft interface information
- * @seq: debugfs table seq_file struct
- * @if_outgoing: the outgoing interface for which this should be printed
- */
-static void batadv_v_orig_print(struct batadv_priv *bat_priv,
-				struct seq_file *seq,
-				struct batadv_hard_iface *if_outgoing)
-{
-	struct batadv_neigh_node *neigh_node;
-	struct batadv_hashtable *hash = bat_priv->orig_hash;
-	int last_seen_msecs, last_seen_secs;
-	struct batadv_orig_node *orig_node;
-	struct batadv_neigh_ifinfo *n_ifinfo;
-	unsigned long last_seen_jiffies;
-	struct hlist_head *head;
-	int batman_count = 0;
-	u32 i;
-
-	seq_puts(seq,
-		 "  Originator      last-seen ( throughput)           Nexthop [outgoingIF]:   Potential nexthops ...\n");
-
-	for (i = 0; i < hash->size; i++) {
-		head = &hash->table[i];
-
-		rcu_read_lock();
-		hlist_for_each_entry_rcu(orig_node, head, hash_entry) {
-			neigh_node = batadv_orig_router_get(orig_node,
-							    if_outgoing);
-			if (!neigh_node)
-				continue;
-
-			n_ifinfo = batadv_neigh_ifinfo_get(neigh_node,
-							   if_outgoing);
-			if (!n_ifinfo)
-				goto next;
-
-			last_seen_jiffies = jiffies - orig_node->last_seen;
-			last_seen_msecs = jiffies_to_msecs(last_seen_jiffies);
-			last_seen_secs = last_seen_msecs / 1000;
-			last_seen_msecs = last_seen_msecs % 1000;
-
-			seq_printf(seq, "%pM %4i.%03is (%9u.%1u) %pM [%10s]:",
-				   orig_node->orig, last_seen_secs,
-				   last_seen_msecs,
-				   n_ifinfo->bat_v.throughput / 10,
-				   n_ifinfo->bat_v.throughput % 10,
-				   neigh_node->addr,
-				   neigh_node->if_incoming->net_dev->name);
-
-			batadv_v_orig_print_neigh(orig_node, if_outgoing, seq);
-			seq_putc(seq, '\n');
-			batman_count++;
-
-next:
-			batadv_neigh_node_put(neigh_node);
-			if (n_ifinfo)
-				batadv_neigh_ifinfo_put(n_ifinfo);
-		}
-		rcu_read_unlock();
-	}
-
-	if (batman_count == 0)
-		seq_puts(seq, "No batman nodes in range ...\n");
-}
-#endif
-
 /**
  * batadv_v_orig_dump_subentry() - Dump an originator subentry into a message
  * @msg: Netlink message to dump into
@@ -685,13 +529,6 @@ static ssize_t batadv_v_store_sel_class(struct batadv_priv *bat_priv,
 	return count;
 }
 
-static ssize_t batadv_v_show_sel_class(struct batadv_priv *bat_priv, char *buff)
-{
-	u32 class = atomic_read(&bat_priv->gw.sel_class);
-
-	return sprintf(buff, "%u.%u MBit\n", class / 10, class % 10);
-}
-
 /**
  * batadv_v_gw_throughput_get() - retrieve the GW-bandwidth for a given GW
  * @gw_node: the GW to retrieve the metric for
@@ -829,78 +666,6 @@ out:
 	return ret;
 }
 
-#ifdef CONFIG_BATMAN_ADV_DEBUGFS
-/* fails if orig_node has no router */
-static int batadv_v_gw_write_buffer_text(struct batadv_priv *bat_priv,
-					 struct seq_file *seq,
-					 const struct batadv_gw_node *gw_node)
-{
-	struct batadv_gw_node *curr_gw;
-	struct batadv_neigh_node *router;
-	struct batadv_neigh_ifinfo *router_ifinfo = NULL;
-	int ret = -1;
-
-	router = batadv_orig_router_get(gw_node->orig_node, BATADV_IF_DEFAULT);
-	if (!router)
-		goto out;
-
-	router_ifinfo = batadv_neigh_ifinfo_get(router, BATADV_IF_DEFAULT);
-	if (!router_ifinfo)
-		goto out;
-
-	curr_gw = batadv_gw_get_selected_gw_node(bat_priv);
-
-	seq_printf(seq, "%s %pM (%9u.%1u) %pM [%10s]: %u.%u/%u.%u MBit\n",
-		   (curr_gw == gw_node ? "=>" : "  "),
-		   gw_node->orig_node->orig,
-		   router_ifinfo->bat_v.throughput / 10,
-		   router_ifinfo->bat_v.throughput % 10, router->addr,
-		   router->if_incoming->net_dev->name,
-		   gw_node->bandwidth_down / 10,
-		   gw_node->bandwidth_down % 10,
-		   gw_node->bandwidth_up / 10,
-		   gw_node->bandwidth_up % 10);
-	ret = seq_has_overflowed(seq) ? -1 : 0;
-
-	if (curr_gw)
-		batadv_gw_node_put(curr_gw);
-out:
-	if (router_ifinfo)
-		batadv_neigh_ifinfo_put(router_ifinfo);
-	if (router)
-		batadv_neigh_node_put(router);
-	return ret;
-}
-
-/**
- * batadv_v_gw_print() - print the gateway list
- * @bat_priv: the bat priv with all the soft interface information
- * @seq: gateway table seq_file struct
- */
-static void batadv_v_gw_print(struct batadv_priv *bat_priv,
-			      struct seq_file *seq)
-{
-	struct batadv_gw_node *gw_node;
-	int gw_count = 0;
-
-	seq_puts(seq,
-		 "      Gateway        ( throughput)           Nexthop [outgoingIF]: advertised uplink bandwidth\n");
-
-	rcu_read_lock();
-	hlist_for_each_entry_rcu(gw_node, &bat_priv->gw.gateway_list, list) {
-		/* fails if orig_node has no router */
-		if (batadv_v_gw_write_buffer_text(bat_priv, seq, gw_node) < 0)
-			continue;
-
-		gw_count++;
-	}
-	rcu_read_unlock();
-
-	if (gw_count == 0)
-		seq_puts(seq, "No gateways in range ...\n");
-}
-#endif
-
 /**
  * batadv_v_gw_dump_entry() - Dump a gateway into a message
  * @msg: Netlink message to dump into
@@ -1046,26 +811,16 @@ static struct batadv_algo_ops batadv_batman_v __read_mostly = {
 		.hardif_init = batadv_v_hardif_neigh_init,
 		.cmp = batadv_v_neigh_cmp,
 		.is_similar_or_better = batadv_v_neigh_is_sob,
-#ifdef CONFIG_BATMAN_ADV_DEBUGFS
-		.print = batadv_v_neigh_print,
-#endif
 		.dump = batadv_v_neigh_dump,
 	},
 	.orig = {
-#ifdef CONFIG_BATMAN_ADV_DEBUGFS
-		.print = batadv_v_orig_print,
-#endif
 		.dump = batadv_v_orig_dump,
 	},
 	.gw = {
 		.init_sel_class = batadv_v_init_sel_class,
 		.store_sel_class = batadv_v_store_sel_class,
-		.show_sel_class = batadv_v_show_sel_class,
 		.get_best_gw_node = batadv_v_gw_get_best_gw_node,
 		.is_eligible = batadv_v_gw_is_eligible,
-#ifdef CONFIG_BATMAN_ADV_DEBUGFS
-		.print = batadv_v_gw_print,
-#endif
 		.dump = batadv_v_gw_dump,
 	},
 };