summaryrefslogtreecommitdiff
path: root/net/bridge/br.c
diff options
context:
space:
mode:
authorVladimir Oltean <vladimir.oltean@nxp.com>2021-08-03 23:34:08 +0300
committerDavid S. Miller <davem@davemloft.net>2021-08-04 14:35:07 +0300
commit957e2235e5264c97cd6be8e2e17f2e11b41f2239 (patch)
tree7b4525ee1332b61e8929f0ef0704bc682f31224c /net/bridge/br.c
parent9c0532f9cc939b470e7008fdb659f46d463f386b (diff)
downloadlinux-957e2235e5264c97cd6be8e2e17f2e11b41f2239.tar.xz
net: make switchdev_bridge_port_{,unoffload} loosely coupled with the bridge
With the introduction of explicit offloading API in switchdev in commit 2f5dc00f7a3e ("net: bridge: switchdev: let drivers inform which bridge ports are offloaded"), we started having Ethernet switch drivers calling directly into a function exported by net/bridge/br_switchdev.c, which is a function exported by the bridge driver. This means that drivers that did not have an explicit dependency on the bridge before, like cpsw and am65-cpsw, now do - otherwise it is not possible to call a symbol exported by a driver that can be built as module unless you are a module too. There was an attempt to solve the dependency issue in the form of commit b0e81817629a ("net: build all switchdev drivers as modules when the bridge is a module"). Grygorii Strashko, however, says about it: | In my opinion, the problem is a bit bigger here than just fixing the | build :( | | In case, of ^cpsw the switchdev mode is kinda optional and in many | cases (especially for testing purposes, NFS) the multi-mac mode is | still preferable mode. | | There were no such tight dependency between switchdev drivers and | bridge core before and switchdev serviced as independent, notification | based layer between them, so ^cpsw still can be "Y" and bridge can be | "M". Now for mostly every kernel build configuration the CONFIG_BRIDGE | will need to be set as "Y", or we will have to update drivers to | support build with BRIDGE=n and maintain separate builds for | networking vs non-networking testing. But is this enough? Wouldn't | it cause 'chain reaction' required to add more and more "Y" options | (like CONFIG_VLAN_8021Q)? | | PS. Just to be sure we on the same page - ARM builds will be forced | (with this patch) to have CONFIG_TI_CPSW_SWITCHDEV=m and so all our | automation testing will just fail with omap2plus_defconfig. In the light of this, it would be desirable for some configurations to avoid dependencies between switchdev drivers and the bridge, and have the switchdev mode as completely optional within the driver. Arnd Bergmann also tried to write a patch which better expressed the build time dependency for Ethernet switch drivers where the switchdev support is optional, like cpsw/am65-cpsw, and this made the drivers follow the bridge (compile as module if the bridge is a module) only if the optional switchdev support in the driver was enabled in the first place: https://patchwork.kernel.org/project/netdevbpf/patch/20210802144813.1152762-1-arnd@kernel.org/ but this still did not solve the fact that cpsw and am65-cpsw now must be built as modules when the bridge is a module - it just expressed correctly that optional dependency. But the new behavior is an apparent regression from Grygorii's perspective. So to support the use case where the Ethernet driver is built-in, NET_SWITCHDEV (a bool option) is enabled, and the bridge is a module, we need a framework that can handle the possible absence of the bridge from the running system, i.e. runtime bloatware as opposed to build-time bloatware. Luckily we already have this framework, since switchdev has been using it extensively. Events from the bridge side are transmitted to the driver side using notifier chains - this was originally done so that unrelated drivers could snoop for events emitted by the bridge towards ports that are implemented by other drivers (think of a switch driver with LAG offload that listens for switchdev events on a bonding/team interface that it offloads). There are also events which are transmitted from the driver side to the bridge side, which again are modeled using notifiers. SWITCHDEV_FDB_ADD_TO_BRIDGE is an example of this, and deals with notifying the bridge that a MAC address has been dynamically learned. So there is a precedent we can use for modeling the new framework. The difference compared to SWITCHDEV_FDB_ADD_TO_BRIDGE is that the work that the bridge needs to do when a port becomes offloaded is blocking in its nature: replay VLANs, MDBs etc. The calling context is indeed blocking (we are under rtnl_mutex), but the existing switchdev notification chain that the bridge is subscribed to is only the atomic one. So we need to subscribe the bridge to the blocking switchdev notification chain too. This patch: - keeps the driver-side perception of the switchdev_bridge_port_{,un}offload unchanged - moves the implementation of switchdev_bridge_port_{,un}offload from the bridge module into the switchdev module. - makes everybody that is subscribed to the switchdev blocking notifier chain "hear" offload & unoffload events - makes the bridge driver subscribe and handle those events - moves the bridge driver's handling of those events into 2 new functions called br_switchdev_port_{,un}offload. These functions contain in fact the core of the logic that was previously in switchdev_bridge_port_{,un}offload, just that now we go through an extra indirection layer to reach them. Unlike all the other switchdev notification structures, the structure used to carry the bridge port information, struct switchdev_notifier_brport_info, does not contain a "bool handled". This is because in the current usage pattern, we always know that a switchdev bridge port offloading event will be handled by the bridge, because the switchdev_bridge_port_offload() call was initiated by a NETDEV_CHANGEUPPER event in the first place, where info->upper_dev is a bridge. So if the bridge wasn't loaded, then the CHANGEUPPER event couldn't have happened. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/bridge/br.c')
-rw-r--r--net/bridge/br.c51
1 files changed, 50 insertions, 1 deletions
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 8fb5dca5f8e0..d3a32c6813e0 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -201,6 +201,48 @@ static struct notifier_block br_switchdev_notifier = {
.notifier_call = br_switchdev_event,
};
+/* called under rtnl_mutex */
+static int br_switchdev_blocking_event(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct netlink_ext_ack *extack = netdev_notifier_info_to_extack(ptr);
+ struct net_device *dev = switchdev_notifier_info_to_dev(ptr);
+ struct switchdev_notifier_brport_info *brport_info;
+ const struct switchdev_brport *b;
+ struct net_bridge_port *p;
+ int err = NOTIFY_DONE;
+
+ p = br_port_get_rtnl(dev);
+ if (!p)
+ goto out;
+
+ switch (event) {
+ case SWITCHDEV_BRPORT_OFFLOADED:
+ brport_info = ptr;
+ b = &brport_info->brport;
+
+ err = br_switchdev_port_offload(p, b->dev, b->ctx,
+ b->atomic_nb, b->blocking_nb,
+ b->tx_fwd_offload, extack);
+ err = notifier_from_errno(err);
+ break;
+ case SWITCHDEV_BRPORT_UNOFFLOADED:
+ brport_info = ptr;
+ b = &brport_info->brport;
+
+ br_switchdev_port_unoffload(p, b->ctx, b->atomic_nb,
+ b->blocking_nb);
+ break;
+ }
+
+out:
+ return err;
+}
+
+static struct notifier_block br_switchdev_blocking_notifier = {
+ .notifier_call = br_switchdev_blocking_event,
+};
+
/* br_boolopt_toggle - change user-controlled boolean option
*
* @br: bridge device
@@ -355,10 +397,14 @@ static int __init br_init(void)
if (err)
goto err_out4;
- err = br_netlink_init();
+ err = register_switchdev_blocking_notifier(&br_switchdev_blocking_notifier);
if (err)
goto err_out5;
+ err = br_netlink_init();
+ if (err)
+ goto err_out6;
+
brioctl_set(br_ioctl_stub);
#if IS_ENABLED(CONFIG_ATM_LANE)
@@ -373,6 +419,8 @@ static int __init br_init(void)
return 0;
+err_out6:
+ unregister_switchdev_blocking_notifier(&br_switchdev_blocking_notifier);
err_out5:
unregister_switchdev_notifier(&br_switchdev_notifier);
err_out4:
@@ -392,6 +440,7 @@ static void __exit br_deinit(void)
{
stp_proto_unregister(&br_stp_proto);
br_netlink_fini();
+ unregister_switchdev_blocking_notifier(&br_switchdev_blocking_notifier);
unregister_switchdev_notifier(&br_switchdev_notifier);
unregister_netdevice_notifier(&br_device_notifier);
brioctl_set(NULL);