summaryrefslogtreecommitdiff
path: root/net/dsa
diff options
context:
space:
mode:
authorAndrew Lunn <andrew@lunn.ch>2020-03-11 18:24:24 +0300
committerDavid S. Miller <davem@davemloft.net>2020-03-12 09:46:11 +0300
commita20f997010c4ec76eaa55b8cc047d76dcac69f70 (patch)
treea39581cb7cb4b62a39c4a987058f4f53726a88da /net/dsa
parent46e4c421a053c36bf7a33dda2272481bcaf3eed3 (diff)
downloadlinux-a20f997010c4ec76eaa55b8cc047d76dcac69f70.tar.xz
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
By default, DSA drivers should configure CPU and DSA ports to their maximum speed. In many configurations this is sufficient to make the link work. In some cases it is necessary to configure the link to run slower, e.g. because of limitations of the SoC it is connected to. Or back to back PHYs are used and the PHY needs to be driven in order to establish link. In this case, phylink is used. Only instantiate phylink if it is required. If there is no PHY, or no fixed link properties, phylink can upset a link which works in the default configuration. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/dsa')
-rw-r--r--net/dsa/port.c12
1 files changed, 9 insertions, 3 deletions
diff --git a/net/dsa/port.c b/net/dsa/port.c
index ed7dabb57985..ec13dc666788 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -648,9 +648,14 @@ err_phy_connect:
int dsa_port_link_register_of(struct dsa_port *dp)
{
struct dsa_switch *ds = dp->ds;
+ struct device_node *phy_np;
- if (!ds->ops->adjust_link)
- return dsa_port_phylink_register(dp);
+ if (!ds->ops->adjust_link) {
+ phy_np = of_parse_phandle(dp->dn, "phy-handle", 0);
+ if (of_phy_is_fixed_link(dp->dn) || phy_np)
+ return dsa_port_phylink_register(dp);
+ return 0;
+ }
dev_warn(ds->dev,
"Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n");
@@ -665,11 +670,12 @@ void dsa_port_link_unregister_of(struct dsa_port *dp)
{
struct dsa_switch *ds = dp->ds;
- if (!ds->ops->adjust_link) {
+ if (!ds->ops->adjust_link && dp->pl) {
rtnl_lock();
phylink_disconnect_phy(dp->pl);
rtnl_unlock();
phylink_destroy(dp->pl);
+ dp->pl = NULL;
return;
}