summaryrefslogtreecommitdiff
path: root/tools/hv
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-09-07 00:45:08 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-09-07 00:45:08 +0300
commitaae3dbb4776e7916b6cd442d00159bea27a695c1 (patch)
treed074c5d783a81e7e2e084b1eba77f57459da7e37 /tools/hv
parentec3604c7a5aae8953545b0d05495357009a960e5 (diff)
parent66bed8465a808400eb14562510e26c8818082cb8 (diff)
downloadlinux-aae3dbb4776e7916b6cd442d00159bea27a695c1.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
Diffstat (limited to 'tools/hv')
-rwxr-xr-xtools/hv/bondvf.sh232
1 files changed, 0 insertions, 232 deletions
diff --git a/tools/hv/bondvf.sh b/tools/hv/bondvf.sh
deleted file mode 100755
index 89b25068cd98..000000000000
--- a/tools/hv/bondvf.sh
+++ /dev/null
@@ -1,232 +0,0 @@
-#!/bin/bash
-
-# This example script creates bonding network devices based on synthetic NIC
-# (the virtual network adapter usually provided by Hyper-V) and the matching
-# VF NIC (SRIOV virtual function). So the synthetic NIC and VF NIC can
-# function as one network device, and fail over to the synthetic NIC if VF is
-# down.
-#
-# Usage:
-# - After configured vSwitch and vNIC with SRIOV, start Linux virtual
-# machine (VM)
-# - Run this scripts on the VM. It will create configuration files in
-# distro specific directory.
-# - Reboot the VM, so that the bonding config are enabled.
-#
-# The config files are DHCP by default. You may edit them if you need to change
-# to Static IP or change other settings.
-#
-
-sysdir=/sys/class/net
-netvsc_cls={f8615163-df3e-46c5-913f-f2d2f965ed0e}
-bondcnt=0
-
-# Detect Distro
-if [ -f /etc/redhat-release ];
-then
- cfgdir=/etc/sysconfig/network-scripts
- distro=redhat
-elif grep -q 'Ubuntu' /etc/issue
-then
- cfgdir=/etc/network
- distro=ubuntu
-elif grep -q 'SUSE' /etc/issue
-then
- cfgdir=/etc/sysconfig/network
- distro=suse
-else
- echo "Unsupported Distro"
- exit 1
-fi
-
-echo Detected Distro: $distro, or compatible
-
-# Get a list of ethernet names
-list_eth=(`cd $sysdir && ls -d */ | cut -d/ -f1 | grep -v bond`)
-eth_cnt=${#list_eth[@]}
-
-echo List of net devices:
-
-# Get the MAC addresses
-for (( i=0; i < $eth_cnt; i++ ))
-do
- list_mac[$i]=`cat $sysdir/${list_eth[$i]}/address`
- echo ${list_eth[$i]}, ${list_mac[$i]}
-done
-
-# Find NIC with matching MAC
-for (( i=0; i < $eth_cnt-1; i++ ))
-do
- for (( j=i+1; j < $eth_cnt; j++ ))
- do
- if [ "${list_mac[$i]}" = "${list_mac[$j]}" ]
- then
- list_match[$i]=${list_eth[$j]}
- break
- fi
- done
-done
-
-function create_eth_cfg_redhat {
- local fn=$cfgdir/ifcfg-$1
-
- rm -f $fn
- echo DEVICE=$1 >>$fn
- echo TYPE=Ethernet >>$fn
- echo BOOTPROTO=none >>$fn
- echo UUID=`uuidgen` >>$fn
- echo ONBOOT=yes >>$fn
- echo PEERDNS=yes >>$fn
- echo IPV6INIT=yes >>$fn
- echo MASTER=$2 >>$fn
- echo SLAVE=yes >>$fn
-}
-
-function create_eth_cfg_pri_redhat {
- create_eth_cfg_redhat $1 $2
-}
-
-function create_bond_cfg_redhat {
- local fn=$cfgdir/ifcfg-$1
-
- rm -f $fn
- echo DEVICE=$1 >>$fn
- echo TYPE=Bond >>$fn
- echo BOOTPROTO=dhcp >>$fn
- echo UUID=`uuidgen` >>$fn
- echo ONBOOT=yes >>$fn
- echo PEERDNS=yes >>$fn
- echo IPV6INIT=yes >>$fn
- echo BONDING_MASTER=yes >>$fn
- echo BONDING_OPTS=\"mode=active-backup miimon=100 primary=$2\" >>$fn
-}
-
-function del_eth_cfg_ubuntu {
- local mainfn=$cfgdir/interfaces
- local fnlist=( $mainfn )
-
- local dirlist=(`awk '/^[ \t]*source/{print $2}' $mainfn`)
-
- local i
- for i in "${dirlist[@]}"
- do
- fnlist+=(`ls $i 2>/dev/null`)
- done
-
- local tmpfl=$(mktemp)
-
- local nic_start='^[ \t]*(auto|iface|mapping|allow-.*)[ \t]+'$1
- local nic_end='^[ \t]*(auto|iface|mapping|allow-.*|source)'
-
- local fn
- for fn in "${fnlist[@]}"
- do
- awk "/$nic_end/{x=0} x{next} /$nic_start/{x=1;next} 1" \
- $fn >$tmpfl
-
- cp $tmpfl $fn
- done
-
- rm $tmpfl
-}
-
-function create_eth_cfg_ubuntu {
- local fn=$cfgdir/interfaces
-
- del_eth_cfg_ubuntu $1
- echo $'\n'auto $1 >>$fn
- echo iface $1 inet manual >>$fn
- echo bond-master $2 >>$fn
-}
-
-function create_eth_cfg_pri_ubuntu {
- local fn=$cfgdir/interfaces
-
- del_eth_cfg_ubuntu $1
- echo $'\n'allow-hotplug $1 >>$fn
- echo iface $1 inet manual >>$fn
- echo bond-master $2 >>$fn
- echo bond-primary $1 >>$fn
-}
-
-function create_bond_cfg_ubuntu {
- local fn=$cfgdir/interfaces
-
- del_eth_cfg_ubuntu $1
-
- echo $'\n'auto $1 >>$fn
- echo iface $1 inet dhcp >>$fn
- echo bond-mode active-backup >>$fn
- echo bond-miimon 100 >>$fn
- echo bond-slaves none >>$fn
-}
-
-function create_eth_cfg_suse {
- local fn=$cfgdir/ifcfg-$1
-
- rm -f $fn
- echo BOOTPROTO=none >>$fn
- echo STARTMODE=auto >>$fn
-}
-
-function create_eth_cfg_pri_suse {
- local fn=$cfgdir/ifcfg-$1
-
- rm -f $fn
- echo BOOTPROTO=none >>$fn
- echo STARTMODE=hotplug >>$fn
-}
-
-function create_bond_cfg_suse {
- local fn=$cfgdir/ifcfg-$1
-
- rm -f $fn
- echo BOOTPROTO=dhcp >>$fn
- echo STARTMODE=auto >>$fn
- echo BONDING_MASTER=yes >>$fn
- echo BONDING_SLAVE_0=$2 >>$fn
- echo BONDING_SLAVE_1=$3 >>$fn
- echo BONDING_MODULE_OPTS=\'mode=active-backup miimon=100 primary=$2\' >>$fn
-}
-
-function create_bond {
- local bondname=bond$bondcnt
- local primary
- local secondary
-
- local class_id1=`cat $sysdir/$1/device/class_id 2>/dev/null`
- local class_id2=`cat $sysdir/$2/device/class_id 2>/dev/null`
-
- if [ "$class_id1" = "$netvsc_cls" ]
- then
- primary=$2
- secondary=$1
- elif [ "$class_id2" = "$netvsc_cls" ]
- then
- primary=$1
- secondary=$2
- else
- return 0
- fi
-
- echo $'\nBond name:' $bondname
-
- echo configuring $primary
- create_eth_cfg_pri_$distro $primary $bondname
-
- echo configuring $secondary
- create_eth_cfg_$distro $secondary $bondname
-
- echo creating: $bondname with primary slave: $primary
- create_bond_cfg_$distro $bondname $primary $secondary
-
- let bondcnt=bondcnt+1
-}
-
-for (( i=0; i < $eth_cnt-1; i++ ))
-do
- if [ -n "${list_match[$i]}" ]
- then
- create_bond ${list_eth[$i]} ${list_match[$i]}
- fi
-done