Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

1 files changed, 123 insertions, 0 deletions

diff --git a/tools/testing/selftests/bpf/ima_setup.sh b/tools/testing/selftests/bpf/ima_setup.sh
new file mode 100755
index 000000000000..8e62581113a3
--- /dev/null
+++ b/tools/testing/selftests/bpf/ima_setup.sh
@@ -0,0 +1,123 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+set -e
+set -u
+set -o pipefail
+
+IMA_POLICY_FILE="/sys/kernel/security/ima/policy"
+TEST_BINARY="/bin/true"
+VERBOSE="${SELFTESTS_VERBOSE:=0}"
+LOG_FILE="$(mktemp /tmp/ima_setup.XXXX.log)"
+
+usage()
+{
+	echo "Usage: $0 <setup|cleanup|run> <existing_tmp_dir>"
+	exit 1
+}
+
+ensure_mount_securityfs()
+{
+	local securityfs_dir=$(grep "securityfs" /proc/mounts | awk '{print $2}')
+
+	if [ -z "${securityfs_dir}" ]; then
+		securityfs_dir=/sys/kernel/security
+		mount -t securityfs security "${securityfs_dir}"
+	fi
+
+	if [ ! -d "${securityfs_dir}" ]; then
+		echo "${securityfs_dir}: securityfs is not mounted" && exit 1
+	fi
+}
+
+setup()
+{
+	local tmp_dir="$1"
+	local mount_img="${tmp_dir}/test.img"
+	local mount_dir="${tmp_dir}/mnt"
+	local copied_bin_path="${mount_dir}/$(basename ${TEST_BINARY})"
+	mkdir -p ${mount_dir}
+
+	dd if=/dev/zero of="${mount_img}" bs=1M count=10
+
+	losetup -f "${mount_img}"
+	local loop_device=$(losetup -a | grep ${mount_img:?} | cut -d ":" -f1)
+
+	mkfs.ext2 "${loop_device:?}"
+	mount "${loop_device}" "${mount_dir}"
+
+	cp "${TEST_BINARY}" "${mount_dir}"
+	local mount_uuid="$(blkid ${loop_device} | sed 's/.*UUID="\([^"]*\)".*/\1/')"
+
+	ensure_mount_securityfs
+	echo "measure func=BPRM_CHECK fsuuid=${mount_uuid}" > ${IMA_POLICY_FILE}
+}
+
+cleanup() {
+	local tmp_dir="$1"
+	local mount_img="${tmp_dir}/test.img"
+	local mount_dir="${tmp_dir}/mnt"
+
+	local loop_devices=$(losetup -a | grep ${mount_img:?} | cut -d ":" -f1)
+
+	for loop_dev in "${loop_devices}"; do
+		losetup -d $loop_dev
+	done
+
+	umount ${mount_dir}
+	rm -rf ${tmp_dir}
+}
+
+run()
+{
+	local tmp_dir="$1"
+	local mount_dir="${tmp_dir}/mnt"
+	local copied_bin_path="${mount_dir}/$(basename ${TEST_BINARY})"
+
+	exec "${copied_bin_path}"
+}
+
+catch()
+{
+	local exit_code="$1"
+	local log_file="$2"
+
+	if [[ "${exit_code}" -ne 0 ]]; then
+		cat "${log_file}" >&3
+	fi
+
+	rm -f "${log_file}"
+	exit ${exit_code}
+}
+
+main()
+{
+	[[ $# -ne 2 ]] && usage
+
+	local action="$1"
+	local tmp_dir="$2"
+
+	[[ ! -d "${tmp_dir}" ]] && echo "Directory ${tmp_dir} doesn't exist" && exit 1
+
+	if [[ "${action}" == "setup" ]]; then
+		setup "${tmp_dir}"
+	elif [[ "${action}" == "cleanup" ]]; then
+		cleanup "${tmp_dir}"
+	elif [[ "${action}" == "run" ]]; then
+		run "${tmp_dir}"
+	else
+		echo "Unknown action: ${action}"
+		exit 1
+	fi
+}
+
+trap 'catch "$?" "${LOG_FILE}"' EXIT
+
+if [[ "${VERBOSE}" -eq 0 ]]; then
+	# Save the stderr to 3 so that we can output back to
+	# it incase of an error.
+	exec 3>&2 1>"${LOG_FILE}" 2>&1
+fi
+
+main "$@"
+rm -f "${LOG_FILE}"