Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

1 files changed, 192 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/forwarding/tc_mpls_l2vpn.sh b/tools/testing/selftests/net/forwarding/tc_mpls_l2vpn.sh
new file mode 100755
index 000000000000..03743f04e178
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_mpls_l2vpn.sh
@@ -0,0 +1,192 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+
+# | H1 (v$h1)             |
+# | 192.0.2.1/24          |
+# | 2001:db8::1/124       |
+# |                 + $h1 |
+# +-----------------|-----+
+#                   |
+#                   | (Plain Ethernet traffic)
+#                   |
+# +-----------------|-----------------------------------------+
+# | LER1            + $edge1                                  |
+# |                     -ingress:                             |
+# |                       -encapsulate Ethernet into MPLS     |
+# |                       -add outer Ethernet header          |
+# |                       -redirect to $mpls1 (egress)        |
+# |                                                           |
+# |                 + $mpls1                                  |
+# |                 |   -ingress:                             |
+# |                 |     -remove outer Ethernet header       |
+# |                 |     -remove MPLS header                 |
+# |                 |     -redirect to $edge1 (egress)        |
+# +-----------------|-----------------------------------------+
+#                   |
+#                   | (Ethernet over MPLS traffic)
+#                   |
+# +-----------------|-----------------------------------------+
+# | LER2            + $mpls2                                  |
+# |                     -ingress:                             |
+# |                       -remove outer Ethernet header       |
+# |                       -remove MPLS header                 |
+# |                       -redirect to $edge2 (egress)        |
+# |                                                           |
+# |                 + $edge2                                  |
+# |                 |   -ingress:                             |
+# |                 |     -encapsulate Ethernet into MPLS     |
+# |                 |     -add outer Ethernet header          |
+# |                 |     -redirect to $mpls2 (egress)        |
+# +-----------------|-----------------------------------------|
+#                   |
+#                   | (Plain Ethernet traffic)
+#                   |
+# +-----------------|-----+
+# | H2 (v$h2)       |     |
+# |                 + $h2 |
+# | 192.0.2.2/24          |
+# | 2001:db8::2/124       |
+# +-----------------------+
+#
+# LER1 and LER2 logically represent two different routers. However, no VRF is
+# created for them, as they don't do any IP routing.
+
+ALL_TESTS="mpls_forward_eth"
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8::1/124
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8::1/124
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8::2/124
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24 2001:db8::2/124
+}
+
+ler1_create()
+{
+	tc qdisc add dev $edge1 ingress
+	tc filter add dev $edge1 ingress                            \
+	   matchall                                                 \
+	   action mpls mac_push label 102                           \
+	   action vlan push_eth dst_mac $mpls2mac src_mac $mpls1mac \
+	   action mirred egress redirect dev $mpls1
+	ip link set dev $edge1 up
+
+	tc qdisc add dev $mpls1 ingress
+	tc filter add dev $mpls1 ingress            \
+	   protocol mpls_uc                         \
+	   flower mpls_label 101                    \
+	   action vlan pop_eth                      \
+	   action mpls pop protocol teb             \
+	   action mirred egress redirect dev $edge1
+	ip link set dev $mpls1 up
+}
+
+ler1_destroy()
+{
+	ip link set dev $mpls1 down
+	tc qdisc del dev $mpls1 ingress
+
+	ip link set dev $edge1 down
+	tc qdisc del dev $edge1 ingress
+}
+
+ler2_create()
+{
+	tc qdisc add dev $edge2 ingress
+	tc filter add dev $edge2 ingress                            \
+	   matchall                                                 \
+	   action mpls mac_push label 101                           \
+	   action vlan push_eth dst_mac $mpls1mac src_mac $mpls2mac \
+	   action mirred egress redirect dev $mpls2
+	ip link set dev $edge2 up
+
+	tc qdisc add dev $mpls2 ingress
+	tc filter add dev $mpls2 ingress            \
+	   protocol mpls_uc                         \
+	   flower mpls_label 102                    \
+	   action vlan pop_eth                      \
+	   action mpls pop protocol teb             \
+	   action mirred egress redirect dev $edge2
+	ip link set dev $mpls2 up
+}
+
+ler2_destroy()
+{
+	ip link set dev $mpls2 down
+	tc qdisc del dev $mpls2 ingress
+
+	ip link set dev $edge2 down
+	tc qdisc del dev $edge2 ingress
+}
+
+mpls_forward_eth()
+{
+	ping_test $h1 192.0.2.2
+	ping6_test $h1 2001:db8::2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	edge1=${NETIFS[p2]}
+
+	mpls1=${NETIFS[p3]}
+	mpls2=${NETIFS[p4]}
+
+	edge2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	mpls1mac=$(mac_get $mpls1)
+	mpls2mac=$(mac_get $mpls2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	ler1_create
+	ler2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ler2_destroy
+	ler1_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS