summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/fddi/defxx.c40
-rw-r--r--drivers/net/fddi/defxx.h12
2 files changed, 32 insertions, 20 deletions
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
index 15a18fbe30cf..caed6eee289c 100644
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -466,7 +466,8 @@ static void dfx_get_bars(struct device *bdev,
*bar_len = (bar | PI_MEM_ADD_MASK_M) + 1;
} else {
*bar_start = base_addr;
- *bar_len = PI_ESIC_K_CSR_IO_LEN;
+ *bar_len = PI_ESIC_K_CSR_IO_LEN +
+ PI_ESIC_K_BURST_HOLDOFF_LEN;
}
}
if (dfx_bus_tc) {
@@ -683,6 +684,9 @@ static void dfx_bus_init(struct net_device *dev)
if (dfx_bus_eisa) {
unsigned long base_addr = to_eisa_device(bdev)->base_addr;
+ /* Disable the board before fiddling with the decoders. */
+ outb(0, base_addr + PI_ESIC_K_SLOT_CNTRL);
+
/* Get the interrupt level from the ESIC chip. */
val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
val &= PI_CONFIG_STAT_0_M_IRQ;
@@ -709,25 +713,33 @@ static void dfx_bus_init(struct net_device *dev)
/*
* Enable memory decoding (MEMCS0) and/or port decoding
* (IOCS1/IOCS0) as appropriate in Function Control
- * Register. One of the port chip selects seems to be
- * used for the Burst Holdoff register, but this bit of
- * documentation is missing and as yet it has not been
- * determined which of the two. This is also the reason
- * the size of the decoded port range is twice as large
- * as one required by the PDQ.
+ * Register. IOCS0 is used for PDQ registers, taking 16
+ * 32-bit words, while IOCS1 is used for the Burst Holdoff
+ * register, taking a single 32-bit word only. We use the
+ * slot-specific I/O range as per the ESIC spec, that is
+ * set bits 15:12 in the mask registers to mask them out.
*/
/* Set the decode range of the board. */
- val = ((bp->base.port >> 12) << PI_IO_CMP_V_SLOT);
+ val = 0;
outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_0_1);
- outb(0, base_addr + PI_ESIC_K_IO_ADD_CMP_0_0);
- outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_1_1);
- outb(0, base_addr + PI_ESIC_K_IO_ADD_CMP_1_0);
- val = PI_ESIC_K_CSR_IO_LEN - 1;
+ val = PI_DEFEA_K_CSR_IO;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_0_0);
+
+ val = PI_IO_CMP_M_SLOT;
outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_0_1);
- outb(0, base_addr + PI_ESIC_K_IO_ADD_MASK_0_0);
+ val = (PI_ESIC_K_CSR_IO_LEN - 1) & ~3;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_0_0);
+
+ val = 0;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_1_1);
+ val = PI_DEFEA_K_BURST_HOLDOFF;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_1_0);
+
+ val = PI_IO_CMP_M_SLOT;
outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_1_1);
- outb(0, base_addr + PI_ESIC_K_IO_ADD_MASK_1_0);
+ val = (PI_ESIC_K_BURST_HOLDOFF_LEN - 1) & ~3;
+ outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_1_0);
/* Enable the decoders. */
val = PI_FUNCTION_CNTRL_M_IOCS1 | PI_FUNCTION_CNTRL_M_IOCS0;
diff --git a/drivers/net/fddi/defxx.h b/drivers/net/fddi/defxx.h
index adb63f3f7b4a..9527f0182fd4 100644
--- a/drivers/net/fddi/defxx.h
+++ b/drivers/net/fddi/defxx.h
@@ -1479,8 +1479,10 @@ typedef union
/* Define EISA controller register offsets */
-#define PI_ESIC_K_CSR_IO_LEN 0x80 /* 128 bytes */
+#define PI_ESIC_K_CSR_IO_LEN 0x40 /* 64 bytes */
+#define PI_ESIC_K_BURST_HOLDOFF_LEN 0x04 /* 4 bytes */
+#define PI_DEFEA_K_CSR_IO 0x000
#define PI_DEFEA_K_BURST_HOLDOFF 0x040
#define PI_ESIC_K_SLOT_ID 0xC80
@@ -1558,11 +1560,9 @@ typedef union
#define PI_MEM_ADD_MASK_M 0x3ff
-/*
- * Define the fields in the IO Compare registers.
- * The driver must initialize the slot field with the slot ID shifted by the
- * amount shown below.
- */
+/* Define the fields in the I/O Address Compare and Mask registers. */
+
+#define PI_IO_CMP_M_SLOT 0xf0
#define PI_IO_CMP_V_SLOT 4