diff options
Diffstat (limited to 'Documentation/devicetree/bindings/dma/sun4i-dma.txt')
-rw-r--r-- | Documentation/devicetree/bindings/dma/sun4i-dma.txt | 45 |
1 files changed, 0 insertions, 45 deletions
diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt deleted file mode 100644 index 8ad556aca70b..000000000000 --- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt +++ /dev/null @@ -1,45 +0,0 @@ -Allwinner A10 DMA Controller - -This driver follows the generic DMA bindings defined in dma.txt. - -Required properties: - -- compatible: Must be "allwinner,sun4i-a10-dma" -- reg: Should contain the registers base address and length -- interrupts: Should contain a reference to the interrupt used by this device -- clocks: Should contain a reference to the parent AHB clock -- #dma-cells : Should be 2, first cell denoting normal or dedicated dma, - second cell holding the request line number. - -Example: - dma: dma-controller@1c02000 { - compatible = "allwinner,sun4i-a10-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <27>; - clocks = <&ahb_gates 6>; - #dma-cells = <2>; - }; - -Clients: - -DMA clients connected to the Allwinner A10 DMA controller must use the -format described in the dma.txt file, using a three-cell specifier for -each channel: a phandle plus two integer cells. -The three cells in order are: - -1. A phandle pointing to the DMA controller. -2. Whether it is using normal (0) or dedicated (1) channels -3. The port ID as specified in the datasheet - -Example: - spi2: spi@1c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; - interrupts = <0 12 4>; - clocks = <&ahb_gates 22>, <&spi2_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma 1 29>, <&dma 1 28>; - dma-names = "rx", "tx"; - #address-cells = <1>; - #size-cells = <0>; - }; |