diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt')
-rw-r--r-- | Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt | 33 |
1 files changed, 0 insertions, 33 deletions
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt deleted file mode 100644 index b2df82b44625..000000000000 --- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt +++ /dev/null @@ -1,33 +0,0 @@ -Broadcom V3D GPU - -Only the Broadcom V3D 3.x and newer GPUs are covered by this binding. -For V3D 2.x, see brcm,bcm-vc4.txt. - -Required properties: -- compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d" -- reg: Physical base addresses and lengths of the register areas -- reg-names: Names for the register areas. The "hub" and "core0" - register areas are always required. The "gca" register area - is required if the GCA cache controller is present. The - "bridge" register area is required if an external reset - controller is not present. -- interrupts: The interrupt numbers. The first interrupt is for the hub, - while the following interrupts are separate interrupt lines - for the cores (if they don't share the hub's interrupt). - See bindings/interrupt-controller/interrupts.txt - -Optional properties: -- clocks: The core clock the unit runs on -- resets: The reset line for v3d, if not using a mapping of the bridge - See bindings/reset/reset.txt - -v3d { - compatible = "brcm,7268-v3d"; - reg = <0xf1204000 0x100>, - <0xf1200000 0x4000>, - <0xf1208000 0x4000>, - <0xf1204100 0x100>; - reg-names = "bridge", "hub", "core0", "gca"; - interrupts = <0 78 4>, - <0 77 4>; -}; |