diff options
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller')
3 files changed, 28 insertions, 20 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt index 4e82fd575cec..c676b03c752e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt @@ -5,21 +5,19 @@ Required properties: - compatible: should be "amazon,al-fic" - reg: physical base address and size of the registers - interrupt-controller: identifies the node as an interrupt controller -- #interrupt-cells: must be 2. - First cell defines the index of the interrupt within the controller. - Second cell is used to specify the trigger type and must be one of the - following: - - bits[3:0] trigger type and level flags - 1 = low-to-high edge triggered - 4 = active high level-sensitive -- interrupt-parent: specifies the parent interrupt controller. +- #interrupt-cells : must be 2. Specifies the number of cells needed to encode + an interrupt source. Supported trigger types are low-to-high edge + triggered and active high level-sensitive. - interrupts: describes which input line in the interrupt parent, this fic's output is connected to. This field property depends on the parent's binding +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + Example: -amazon_fic: interrupt-controller@0xfd8a8500 { +amazon_fic: interrupt-controller@fd8a8500 { compatible = "amazon,al-fic"; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml index bae10e261fa9..507c141ea760 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml @@ -2,7 +2,7 @@ # Copyright 2018 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/interrupt/intel-ixp4xx-interrupt.yaml#" +$id: "http://devicetree.org/schemas/interrupt-controller/intel,ixp4xx-interrupt.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Intel IXP4xx XScale Networking Processors Interrupt Controller diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt index 09fc02b99845..a5c1db95b3ec 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt @@ -1,20 +1,30 @@ * ARC-HS Interrupt Distribution Unit - This optional 2nd level interrupt controller can be used in SMP configurations for - dynamic IRQ routing, load balancing of common/external IRQs towards core intc. + This optional 2nd level interrupt controller can be used in SMP configurations + for dynamic IRQ routing, load balancing of common/external IRQs towards core + intc. Properties: - compatible: "snps,archs-idu-intc" - interrupt-controller: This is an interrupt controller. -- #interrupt-cells: Must be <1>. - - Value of the cell specifies the "common" IRQ from peripheral to IDU. Number N - of the particular interrupt line of IDU corresponds to the line N+24 of the - core interrupt controller. - - intc accessed via the special ARC AUX register interface, hence "reg" property - is not specified. +- #interrupt-cells: Must be <1> or <2>. + + Value of the first cell specifies the "common" IRQ from peripheral to IDU. + Number N of the particular interrupt line of IDU corresponds to the line N+24 + of the core interrupt controller. + + The (optional) second cell specifies any of the following flags: + - bits[3:0] trigger type and level flags + 1 = low-to-high edge triggered + 2 = NOT SUPPORTED (high-to-low edge triggered) + 4 = active high level-sensitive <<< DEFAULT + 8 = NOT SUPPORTED (active low level-sensitive) + When no second cell is specified, the interrupt is assumed to be level + sensitive. + + The interrupt controller is accessed via the special ARC AUX register + interface, hence "reg" property is not specified. Example: core_intc: core-interrupt-controller { |