diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt | 21 |
1 files changed, 15 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt index e70c79bbbc5b..c4de930f2406 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt @@ -40,6 +40,14 @@ MSM8998 platform. Definition: must be 2. Specifying the pin number and flags, as defined in <dt-bindings/gpio/gpio.h> +- gpio-ranges: + Usage: required + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Definition: see ../gpio/gpio.txt + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -124,9 +132,8 @@ to specify in a pin configuration subnode: qlink_request, qua_mi2s, sd_card, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ssbi1, ssc_irq, ter_mi2s, tgu_ch0, tgu_ch1, - tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en, - tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en, - tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present, + tsense_pwm1, tsense_pwm2, tsif0, tsif1, + uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1, vsense_clkout, vsense_data0, vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1, @@ -135,17 +142,17 @@ to specify in a pin configuration subnode: - bias-disable: Usage: optional Value type: <none> - Definition: The specified pins should be configued as no pull. + Definition: The specified pins should be configured as no pull. - bias-pull-down: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull down. + Definition: The specified pins should be configured as pull down. - bias-pull-up: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull up. + Definition: The specified pins should be configured as pull up. - output-high: Usage: optional @@ -175,6 +182,8 @@ Example: interrupts = <0 208 0>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 175>; + gpio-reserved-ranges = <0 4>, <81 4>; interrupt-controller; #interrupt-cells = <2>; |