diff options
Diffstat (limited to 'Documentation/devicetree/bindings/remoteproc')
-rw-r--r-- | Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt (renamed from Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt) | 35 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt | 63 |
2 files changed, 88 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt index 66af2c30944f..1337a3d93d35 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt @@ -1,12 +1,13 @@ -Qualcomm Technology Inc. ADSP Peripheral Image Loader +Qualcomm Technology Inc. Hexagon v56 Peripheral Image Loader This document defines the binding for a component that loads and boots firmware -on the Qualcomm Technology Inc. ADSP Hexagon core. +on the Qualcomm Technology Inc. Hexagon v56 core. - compatible: Usage: required Value type: <string> Definition: must be one of: + "qcom,qcs404-cdsp-pil", "qcom,sdm845-adsp-pil" - reg: @@ -28,10 +29,11 @@ on the Qualcomm Technology Inc. ADSP Hexagon core. - clocks: Usage: required Value type: <prop-encoded-array> - Definition: List of 8 phandle and clock specifier pairs for the adsp. + Definition: List of phandles and clock specifier pairs for the Hexagon, + per clock-names below. - clock-names: - Usage: required + Usage: required for SDM845 ADSP Value type: <stringlist> Definition: List of clock input name strings sorted in the same order as the clocks property. Definition must have @@ -39,6 +41,14 @@ on the Qualcomm Technology Inc. ADSP Hexagon core. "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep" and "qdsp6ss_core". +- clock-names: + Usage: required for QCS404 CDSP + Value type: <stringlist> + Definition: List of clock input name strings sorted in the same + order as the clocks property. Definition must have + "xo", "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave", + "q6ss_master", "q6_axim". + - power-domains: Usage: required Value type: <phandle> @@ -47,28 +57,33 @@ on the Qualcomm Technology Inc. ADSP Hexagon core. - resets: Usage: required Value type: <phandle> - Definition: reference to the list of 2 reset-controller for the adsp. + Definition: reference to the list of resets for the Hexagon. - reset-names: - Usage: required + Usage: required for SDM845 ADSP Value type: <stringlist> Definition: must be "pdc_sync" and "cc_lpass" +- reset-names: + Usage: required for QCS404 CDSP + Value type: <stringlist> + Definition: must be "restart" + - qcom,halt-regs: Usage: required Value type: <prop-encoded-array> Definition: a phandle reference to a syscon representing TCSR followed - by the offset within syscon for lpass halt register. + by the offset within syscon for Hexagon halt register. - memory-region: Usage: required Value type: <phandle> - Definition: reference to the reserved-memory for the ADSP + Definition: reference to the reserved-memory for the firmware - qcom,smem-states: Usage: required Value type: <phandle> - Definition: reference to the smem state for requesting the ADSP to + Definition: reference to the smem state for requesting the Hexagon to shut down - qcom,smem-state-names: @@ -79,7 +94,7 @@ on the Qualcomm Technology Inc. ADSP Hexagon core. = SUBNODES The adsp node may have an subnode named "glink-edge" that describes the -communication edge, channels and devices related to the ADSP. +communication edge, channels and devices related to the Hexagon. See ../soc/qcom/qcom,glink.txt for details on how to describe these. = EXAMPLE diff --git a/Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt b/Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt new file mode 100644 index 000000000000..5fa915a4b736 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt @@ -0,0 +1,63 @@ +STMicroelectronics STM32 Remoteproc +----------------------------------- +This document defines the binding for the remoteproc component that loads and +boots firmwares on the ST32MP family chipset. + +Required properties: +- compatible: Must be "st,stm32mp1-m4" +- reg: Address ranges of the RETRAM and MCU SRAM memories used by the + remote processor. +- resets: Reference to a reset controller asserting the remote processor. +- st,syscfg-holdboot: Reference to the system configuration which holds the + remote processor reset hold boot + 1st cell: phandle of syscon block + 2nd cell: register offset containing the hold boot setting + 3rd cell: register bitmask for the hold boot field +- st,syscfg-tz: Reference to the system configuration which holds the RCC trust + zone mode + 1st cell: phandle to syscon block + 2nd cell: register offset containing the RCC trust zone mode setting + 3rd cell: register bitmask for the RCC trust zone mode bit + +Optional properties: +- interrupts: Should contain the watchdog interrupt +- mboxes: This property is required only if the rpmsg/virtio functionality + is used. List of phandle and mailbox channel specifiers: + - a channel (a) used to communicate through virtqueues with the + remote proc. + Bi-directional channel: + - from local to remote = send message + - from remote to local = send message ack + - a channel (b) working the opposite direction of channel (a) + - a channel (c) used by the local proc to notify the remote proc + that it is about to be shut down. + Unidirectional channel: + - from local to remote, where ACK from the remote means + that it is ready for shutdown +- mbox-names: This property is required if the mboxes property is used. + - must be "vq0" for channel (a) + - must be "vq1" for channel (b) + - must be "shutdown" for channel (c) +- memory-region: List of phandles to the reserved memory regions associated with + the remoteproc device. This is variable and describes the + memories shared with the remote processor (eg: remoteproc + firmware and carveouts, rpmsg vrings, ...). + (see ../reserved-memory/reserved-memory.txt) +- st,syscfg-pdds: Reference to the system configuration which holds the remote + processor deep sleep setting + 1st cell: phandle to syscon block + 2nd cell: register offset containing the deep sleep setting + 3rd cell: register bitmask for the deep sleep bit +- st,auto-boot: If defined, when remoteproc is probed, it loads the default + firmware and starts the remote processor. + +Example: + m4_rproc: m4@10000000 { + compatible = "st,stm32mp1-m4"; + reg = <0x10000000 0x40000>, + <0x30000000 0x40000>, + <0x38000000 0x10000>; + resets = <&rcc MCU_R>; + st,syscfg-holdboot = <&rcc 0x10C 0x1>; + st,syscfg-tz = <&rcc 0x000 0x1>; + }; |