summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/pci/designware-pcie.txt7
-rw-r--r--Documentation/devicetree/bindings/pci/pci-keystone.txt58
2 files changed, 60 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index c124f9bc11f3..5561a1c060d0 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -4,8 +4,11 @@ Required properties:
- compatible:
"snps,dw-pcie" for RC mode;
"snps,dw-pcie-ep" for EP mode;
-- reg: Should contain the configuration address space.
-- reg-names: Must be "config" for the PCIe configuration space.
+- reg: For designware cores version < 4.80 contains the configuration
+ address space. For designware core version >= 4.80, contains
+ the configuration and ATU address space
+- reg-names: Must be "config" for the PCIe configuration space and "atu" for
+ the ATU address space.
(The old way of getting the configuration address space from "ranges"
is deprecated and should be avoided.)
- num-lanes: number of lanes to use
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
index 2030ee0dc4f9..47202a2938f2 100644
--- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -11,16 +11,24 @@ described here as well as properties that are not applicable.
Required Properties:-
-compatibility: "ti,keystone-pcie"
-reg: index 1 is the base address and length of DW application registers.
- index 2 is the base address and length of PCI device ID register.
+compatibility: Should be "ti,keystone-pcie" for RC on Keystone2 SoC
+ Should be "ti,am654-pcie-rc" for RC on AM654x SoC
+reg: Three register ranges as listed in the reg-names property
+reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
+ TI specific application registers, "config" for the
+ configuration space address
pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
interrupt-cells: should be set to 1
interrupts: GIC interrupt lines connected to PCI MSI interrupt lines
+ (required if the compatible is "ti,keystone-pcie")
+msi-map: As specified in Documentation/devicetree/bindings/pci/pci-msi.txt
+ (required if the compatible is "ti,am654-pcie-rc".
ti,syscon-pcie-id : phandle to the device control module required to set device
id and vendor id.
+ti,syscon-pcie-mode : phandle to the device control module required to configure
+ PCI in either RC mode or EP mode.
Example:
pcie_msi_intc: msi-interrupt-controller {
@@ -61,3 +69,47 @@ Optional properties:-
DesignWare DT Properties not applicable for Keystone PCI
1. pcie_bus clock-names not used. Instead, a phandle to phys is used.
+
+AM654 PCIe Endpoint
+===================
+
+Required Properties:-
+
+compatibility: Should be "ti,am654-pcie-ep" for EP on AM654x SoC
+reg: Four register ranges as listed in the reg-names property
+reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
+ TI specific application registers, "atu" for the
+ Address Translation Unit configuration registers and
+ "addr_space" used to map remote RC address space
+num-ib-windows: As specified in
+ Documentation/devicetree/bindings/pci/designware-pcie.txt
+num-ob-windows: As specified in
+ Documentation/devicetree/bindings/pci/designware-pcie.txt
+num-lanes: As specified in
+ Documentation/devicetree/bindings/pci/designware-pcie.txt
+power-domains: As documented by the generic PM domain bindings in
+ Documentation/devicetree/bindings/power/power_domain.txt.
+ti,syscon-pcie-mode: phandle to the device control module required to configure
+ PCI in either RC mode or EP mode.
+
+Optional properties:-
+
+phys: list of PHY specifiers (used by generic PHY framework)
+phy-names: must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+ number of lanes as specified in *num-lanes* property.
+("phys" and "phy-names" DT bindings are specified in
+Documentation/devicetree/bindings/phy/phy-bindings.txt)
+interrupts: platform interrupt for error interrupts.
+
+pcie-ep {
+ compatible = "ti,am654-pcie-ep";
+ reg = <0x5500000 0x1000>, <0x5501000 0x1000>,
+ <0x10000000 0x8000000>, <0x5506000 0x1000>;
+ reg-names = "app", "dbics", "addr_space", "atu";
+ power-domains = <&k3_pds 120>;
+ ti,syscon-pcie-mode = <&pcie0_mode>;
+ num-lanes = <1>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+};