diff options
Diffstat (limited to 'Documentation/devicetree')
21 files changed, 400 insertions, 14 deletions
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt index f4d04a067282..82edbaaa3f85 100644 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt @@ -11,3 +11,15 @@ Example: reg = <0xffd08000 0x1000>; cpu1-start-addr = <0xffd080c4>; }; + +ARM64 - Stratix10 +Required properties: +- compatible : "altr,sys-mgr-s10" +- reg : Should contain 1 register range(address and length) + for system manager register. + +Example: + sysmgr@ffd12000 { + compatible = "altr,sys-mgr-s10"; + reg = <0xffd12000 0x228>; + }; diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 365dcf384d73..82dd7582e945 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -228,7 +228,7 @@ patternProperties: - renesas,r9a06g032-smp - rockchip,rk3036-smp - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp + - socionext,milbeaut-m10v-smp - ste,dbx500-smp cpu-release-addr: diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt index 08bab0e94d25..d0ae46d7bac3 100644 --- a/Documentation/devicetree/bindings/hwmon/adc128d818.txt +++ b/Documentation/devicetree/bindings/hwmon/adc128d818.txt @@ -26,7 +26,7 @@ Required node properties: Optional node properties: - - ti,mode: Operation mode (see above). + - ti,mode: Operation mode (u8) (see above). Example (operation mode 2): @@ -34,5 +34,5 @@ Example (operation mode 2): adc128d818@1d { compatible = "ti,adc128d818"; reg = <0x1d>; - ti,mode = <2>; + ti,mode = /bits/ 8 <2>; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-xscale.txt b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt index dcc8390e0d24..dcc8390e0d24 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-xscale.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt index ee4c32454198..ee4c32454198 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt b/Documentation/devicetree/bindings/i2c/i2c-stu300.txt index bd81a482634f..bd81a482634f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-stu300.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt index 49df0053347a..49df0053347a 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt index 94a425eaa6c7..94a425eaa6c7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.txt b/Documentation/devicetree/bindings/input/max77650-onkey.txt new file mode 100644 index 000000000000..477dc74f452a --- /dev/null +++ b/Documentation/devicetree/bindings/input/max77650-onkey.txt @@ -0,0 +1,26 @@ +Onkey driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The onkey controller is represented as a sub-node of the PMIC node on +the device tree. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-onkey". + +Optional properties: +- linux,code: The key-code to be reported when the key is pressed. + Defaults to KEY_POWER. +- maxim,onkey-slide: The system's button is a slide switch, not the default + push button. + +Example: +-------- + + onkey { + compatible = "maxim,max77650-onkey"; + linux,code = <KEY_END>; + maxim,onkey-slide; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt index 8de96a4fb2d5..f977ea7617f6 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt @@ -16,6 +16,7 @@ Required properties: - "renesas,irqc-r8a7793" (R-Car M2-N) - "renesas,irqc-r8a7794" (R-Car E2) - "renesas,intc-ex-r8a774a1" (RZ/G2M) + - "renesas,intc-ex-r8a774c0" (RZ/G2E) - "renesas,intc-ex-r8a7795" (R-Car H3) - "renesas,intc-ex-r8a7796" (R-Car M3-W) - "renesas,intc-ex-r8a77965" (R-Car M3-N) diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.txt b/Documentation/devicetree/bindings/leds/leds-max77650.txt new file mode 100644 index 000000000000..3a67115cc1da --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-max77650.txt @@ -0,0 +1,57 @@ +LED driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The LED controller is represented as a sub-node of the PMIC node on +the device tree. + +This device has three current sinks. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-led" +- #address-cells: Must be <1>. +- #size-cells: Must be <0>. + +Each LED is represented as a sub-node of the LED-controller node. Up to +three sub-nodes can be defined. + +Required properties of the sub-node: +------------------------------------ + +- reg: Must be <0>, <1> or <2>. + +Optional properties of the sub-node: +------------------------------------ + +- label: See Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger: See Documentation/devicetree/bindings/leds/common.txt + +For more details, please refer to the generic GPIO DT binding document +<devicetree/bindings/gpio/gpio.txt>. + +Example: +-------- + + leds { + compatible = "maxim,max77650-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "blue:usr0"; + }; + + led@1 { + reg = <1>; + label = "red:usr1"; + linux,default-trigger = "heartbeat"; + }; + + led@2 { + reg = <2>; + label = "green:usr2"; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt index 9c16d51cc15b..5a642a51d58e 100644 --- a/Documentation/devicetree/bindings/mfd/max77620.txt +++ b/Documentation/devicetree/bindings/mfd/max77620.txt @@ -4,7 +4,8 @@ Required properties: ------------------- - compatible: Must be one of "maxim,max77620" - "maxim,max20024". + "maxim,max20024" + "maxim,max77663" - reg: I2C device address. Optional properties: @@ -17,6 +18,11 @@ Optional properties: IRQ numbers for different interrupt source of MAX77620 are defined at dt-bindings/mfd/max77620.h. +- system-power-controller: Indicates that this PMIC is controlling the + system power, see [1] for more details. + +[1] Documentation/devicetree/bindings/power/power-controller.txt + Optional subnodes and their properties: ======================================= @@ -105,6 +111,7 @@ Optional properties: Here supported time periods by device in microseconds are as follows: MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds. MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. +MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. -maxim,power-ok-control: configure map power ok bit 1: Enables POK(Power OK) to control nRST_IO and GPIO1 diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt new file mode 100644 index 000000000000..b529d8d19335 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max77650.txt @@ -0,0 +1,46 @@ +MAX77650 ultra low-power PMIC from Maxim Integrated. + +Required properties: +------------------- +- compatible: Must be "maxim,max77650" +- reg: I2C device address. +- interrupts: The interrupt on the parent the controller is + connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Must be <2>. + +- gpio-controller: Marks the device node as a gpio controller. +- #gpio-cells: Must be <2>. The first cell is the pin number and + the second cell is used to specify the gpio active + state. + +Optional properties: +-------------------- +gpio-line-names: Single string containing the name of the GPIO line. + +The GPIO-controller module is represented as part of the top-level PMIC +node. The device exposes a single GPIO line. + +For device-tree bindings of other sub-modules (regulator, power supply, +LEDs and onkey) refer to the binding documents under the respective +sub-system directories. + +For more details on GPIO bindings, please refer to the generic GPIO DT +binding document <devicetree/bindings/gpio/gpio.txt>. + +Example: +-------- + + pmic@48 { + compatible = "maxim,max77650"; + reg = <0x48>; + + interrupt-controller; + interrupt-parent = <&gpio2>; + #interrupt-cells = <2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "max77650-charger"; + }; diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt new file mode 100644 index 000000000000..f0c2f7fcf5c7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stmfx.txt @@ -0,0 +1,28 @@ +STMicroelectonics Multi-Function eXpander (STMFX) Core bindings + +ST Multi-Function eXpander (STMFX) is a slave controller using I2C for +communication with the main MCU. Its main features are GPIO expansion, main +MCU IDD measurement (IDD is the amount of current that flows through VDD) and +resistive touchscreen controller. + +Required properties: +- compatible: should be "st,stmfx-0300". +- reg: I2C slave address of the device. +- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal. + Please refer to ../interrupt-controller/interrupt.txt + +Optional properties: +- drive-open-drain: configure MFX_IRQ_OUT as open drain. +- vdd-supply: phandle of the regulator supplying STMFX. + +Example: + + stmfx: stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + }; + +Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings. diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt index 24c5cdaba8d2..ca83dcc84fb8 100644 --- a/Documentation/devicetree/bindings/net/davinci_emac.txt +++ b/Documentation/devicetree/bindings/net/davinci_emac.txt @@ -20,6 +20,8 @@ Required properties: Optional properties: - phy-handle: See ethernet.txt file in the same directory. If absent, davinci_emac driver defaults to 100/FULL. +- nvmem-cells: phandle, reference to an nvmem node for the MAC address +- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used - ti,davinci-rmii-en: 1 byte, 1 means use RMII - ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM? diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt index bbcb255c3150..93a7469e70d4 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt @@ -12,10 +12,15 @@ Required properties: Subnodes: The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. As the QCA8K switches do not have a N:N mapping of -port and PHY id, each subnode describing a port needs to have a valid phandle -referencing the internal PHY connected to it. The CPU port of this switch is -always port 0. +described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external +mdio-bus each subnode describing a port needs to have a valid phandle +referencing the internal PHY it is connected to. This is because there's no +N:N mapping of port and PHY id. + +Don't use mixed external and internal mdio-bus configurations, as this is +not supported by the hardware. + +The CPU port of this switch is always port 0. A CPU port node has the following optional node: @@ -31,8 +36,9 @@ For QCA8K the 'fixed-link' sub-node supports only the following properties: - 'full-duplex' (boolean, optional), to indicate that full duplex is used. When absent, half duplex is assumed. -Example: +Examples: +for the external mdio-bus configuration: &mdio0 { phy_port1: phy@0 { @@ -55,12 +61,12 @@ Example: reg = <4>; }; - switch0@0 { + switch@10 { compatible = "qca,qca8337"; #address-cells = <1>; #size-cells = <0>; - reg = <0>; + reg = <0x10>; ports { #address-cells = <1>; @@ -108,3 +114,56 @@ Example: }; }; }; + +for the internal master mdio-bus configuration: + + &mdio0 { + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = 1000; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "wan"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index cfc376bc977a..a68621580584 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -10,15 +10,14 @@ Documentation/devicetree/bindings/phy/phy-bindings.txt. the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the "local-mac-address" property; -- nvmem-cells: phandle, reference to an nvmem node for the MAC address; -- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used; - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in the Devicetree Specification). - phy-mode: string, operation mode of the PHY interface. This is now a de-facto standard property; supported values are: - * "internal" + * "internal" (Internal means there is not a standard bus between the MAC and + the PHY, something proprietary is being used to embed the PHY in the MAC.) * "mii" * "gmii" * "sgmii" diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 174f292d8a3e..8b80515729d7 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -26,6 +26,10 @@ Required properties: Optional elements: 'tsu_clk' - clocks: Phandles to input clocks. +Optional properties: +- nvmem-cells: phandle, reference to an nvmem node for the MAC address +- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used + Optional properties for PHY child node: - reset-gpios : Should specify the gpio for phy reset - magic-packet : If present, indicates that the hardware supports waking diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt new file mode 100644 index 000000000000..c1b4c1819b84 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt @@ -0,0 +1,116 @@ +STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings + +ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion. +Please refer to ../mfd/stmfx.txt for STMFX Core bindings. + +Required properties: +- compatible: should be "st,stmfx-0300-pinctrl". +- #gpio-cells: should be <2>, the first cell is the GPIO number and the second + cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>. +- gpio-controller: marks the device as a GPIO controller. +- #interrupt-cells: should be <2>, the first cell is the GPIO number and the + second cell is the interrupt flags in accordance with + <dt-bindings/interrupt-controller/irq.h>. +- interrupt-controller: marks the device as an interrupt controller. +- gpio-ranges: specifies the mapping between gpio controller and pin + controller pins. Check "Concerning gpio-ranges property" below. +Please refer to ../gpio/gpio.txt. + +Please refer to pinctrl-bindings.txt for pin configuration. + +Required properties for pin configuration sub-nodes: +- pins: list of pins to which the configuration applies. + +Optional properties for pin configuration sub-nodes (pinconf-generic ones): +- bias-disable: disable any bias on the pin. +- bias-pull-up: the pin will be pulled up. +- bias-pull-pin-default: use the pin-default pull state. +- bias-pull-down: the pin will be pulled down. +- drive-open-drain: the pin will be driven with open drain. +- drive-push-pull: the pin will be driven actively high and low. +- output-high: the pin will be configured as an output driving high level. +- output-low: the pin will be configured as an output driving low level. + +Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are +called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2". + +Concerning gpio-ranges property: +- if all STMFX pins[24:0] are available (no other STMFX function in use), you + should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; +- if agpio[3:0] are not available (STMFX Touchscreen function in use), you + should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; +- if agpio[7:4] are not available (STMFX IDD function in use), you + should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; + + +Example: + + stmfx: stmfx@42 { + ... + + stmfx_pinctrl: stmfx-pin-controller { + compatible = "st,stmfx-0300-pinctrl"; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-up; + }; + }; + }; + +Example of STMFX GPIO consumers: + + joystick { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&joystick_pins>; + pinctrl-names = "default"; + button-0 { + label = "JoySel"; + linux,code = <KEY_ENTER>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + }; + button-1 { + label = "JoyDown"; + linux,code = <KEY_DOWN>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + }; + button-2 { + label = "JoyLeft"; + linux,code = <KEY_LEFT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + }; + button-3 { + label = "JoyRight"; + linux,code = <KEY_RIGHT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; + button-4 { + label = "JoyUp"; + linux,code = <KEY_UP>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + }; + }; + + leds { + compatible = "gpio-leds"; + orange { + gpios = <&stmfx_pinctrl 17 1>; + }; + + blue { + gpios = <&stmfx_pinctrl 19 1>; + }; + } diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.txt b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt new file mode 100644 index 000000000000..e6d0fb6ff94e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt @@ -0,0 +1,28 @@ +Battery charger driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The charger is represented as a sub-node of the PMIC node on the device tree. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-charger" + +Optional properties: +-------------------- +- input-voltage-min-microvolt: Minimum CHGIN regulation voltage. Must be one + of: 4000000, 4100000, 4200000, 4300000, + 4400000, 4500000, 4600000, 4700000. +- input-current-limit-microamp: CHGIN input current limit (in microamps). Must + be one of: 95000, 190000, 285000, 380000, + 475000. + +Example: +-------- + + charger { + compatible = "maxim,max77650-charger"; + input-voltage-min-microvolt = <4200000>; + input-current-limit-microamp = <285000>; + }; diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 742cb470595b..bcfb13194f16 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -16,6 +16,7 @@ Required properties: * "mediatek,mt8127-uart" for MT8127 compatible UARTS * "mediatek,mt8135-uart" for MT8135 compatible UARTS * "mediatek,mt8173-uart" for MT8173 compatible UARTS + * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS * "mediatek,mt6577-uart" for MT6577 and all of the above - reg: The base address of the UART register bank. |