diff options
Diffstat (limited to 'Documentation/devicetree')
8 files changed, 278 insertions, 21 deletions
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt index f4d04a067282..82edbaaa3f85 100644 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt @@ -11,3 +11,15 @@ Example: reg = <0xffd08000 0x1000>; cpu1-start-addr = <0xffd080c4>; }; + +ARM64 - Stratix10 +Required properties: +- compatible : "altr,sys-mgr-s10" +- reg : Should contain 1 register range(address and length) + for system manager register. + +Example: + sysmgr@ffd12000 { + compatible = "altr,sys-mgr-s10"; + reg = <0xffd12000 0x228>; + }; diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.txt b/Documentation/devicetree/bindings/input/max77650-onkey.txt new file mode 100644 index 000000000000..477dc74f452a --- /dev/null +++ b/Documentation/devicetree/bindings/input/max77650-onkey.txt @@ -0,0 +1,26 @@ +Onkey driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The onkey controller is represented as a sub-node of the PMIC node on +the device tree. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-onkey". + +Optional properties: +- linux,code: The key-code to be reported when the key is pressed. + Defaults to KEY_POWER. +- maxim,onkey-slide: The system's button is a slide switch, not the default + push button. + +Example: +-------- + + onkey { + compatible = "maxim,max77650-onkey"; + linux,code = <KEY_END>; + maxim,onkey-slide; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-lm3532.txt b/Documentation/devicetree/bindings/leds/leds-lm3532.txt new file mode 100644 index 000000000000..c087f85ddddc --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3532.txt @@ -0,0 +1,101 @@ +* Texas Instruments - lm3532 White LED driver with ambient light sensing +capability. + +The LM3532 provides the 3 high-voltage, low-side current sinks. The device is +programmable over an I2C-compatible interface and has independent +current control for all three channels. The adaptive current regulation +method allows for different LED currents in each current sink thus allowing +for a wide variety of backlight and keypad applications. + +The main features of the LM3532 include dual ambient light sensor inputs +each with 32 internal voltage setting resistors, 8-bit logarithmic and linear +brightness control, dual external PWM brightness control inputs, and up to +1000:1 dimming ratio with programmable fade in and fade out settings. + +Required properties: + - compatible : "ti,lm3532" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : gpio pin to enable (active high)/disable the device. + - ramp-up-us - The Run time ramp rates/step are from one current + set-point to another after the device has reached its + initial target set point from turn-on + - ramp-down-us - The Run time ramp rates/step are from one current + set-point to another after the device has reached its + initial target set point from turn-on + Range for ramp settings: 8us - 65536us + +Optional properties if ALS mode is used: + - ti,als-vmin - Minimum ALS voltage defined in Volts + - ti,als-vmax - Maximum ALS voltage defined in Volts + Per the data sheet the max ALS voltage is 2V and the min is 0V + + - ti,als1-imp-sel - ALS1 impedance resistor selection in Ohms + - ti,als2-imp-sel - ALS2 impedance resistor selection in Ohms + Range for impedance select: 37000 Ohms - 1190 Ohms + Values above 37kohms will be set to the "High Impedance" setting + + - ti,als-avrg-time-us - Determines the length of time the device needs to + average the two ALS inputs. This is only used if + the input mode is LM3532_ALS_INPUT_AVRG. + Range: 17920us - 2293760us + - ti,als-input-mode - Determines how the device uses the attached ALS + devices. + 0x00 - ALS1 and ALS2 input average + 0x01 - ALS1 Input + 0x02 - ALS2 Input + 0x03 - Max of ALS1 and ALS2 + +Required child properties: + - reg : Indicates control bank the LED string is controlled by + - led-sources : see Documentation/devicetree/bindings/leds/common.txt + - ti,led-mode : Defines if the LED strings are manually controlled or + if the LED strings are controlled by the ALS. + 0x00 - LED strings are I2C controlled via full scale + brightness control register + 0x01 - LED strings are ALS controlled + +Optional LED child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: +led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + ramp-up-us = <1024>; + ramp-down-us = <65536>; + + ti,als-vmin = <0>; + ti,als-vmax = <2000>; + ti,als1-imp-sel = <4110>; + ti,als2-imp-sel = <2180>; + ti,als-avrg-time-us = <17920>; + ti,als-input-mode = <0x00>; + + led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <1>; + label = ":backlight"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; + }; +}; + +For more product information please see the links below: +http://www.ti.com/product/LM3532 diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.txt b/Documentation/devicetree/bindings/leds/leds-max77650.txt new file mode 100644 index 000000000000..3a67115cc1da --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-max77650.txt @@ -0,0 +1,57 @@ +LED driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The LED controller is represented as a sub-node of the PMIC node on +the device tree. + +This device has three current sinks. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-led" +- #address-cells: Must be <1>. +- #size-cells: Must be <0>. + +Each LED is represented as a sub-node of the LED-controller node. Up to +three sub-nodes can be defined. + +Required properties of the sub-node: +------------------------------------ + +- reg: Must be <0>, <1> or <2>. + +Optional properties of the sub-node: +------------------------------------ + +- label: See Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger: See Documentation/devicetree/bindings/leds/common.txt + +For more details, please refer to the generic GPIO DT binding document +<devicetree/bindings/gpio/gpio.txt>. + +Example: +-------- + + leds { + compatible = "maxim,max77650-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "blue:usr0"; + }; + + led@1 { + reg = <1>; + label = "red:usr1"; + linux,default-trigger = "heartbeat"; + }; + + led@2 { + reg = <2>; + label = "green:usr2"; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt index 9c16d51cc15b..5a642a51d58e 100644 --- a/Documentation/devicetree/bindings/mfd/max77620.txt +++ b/Documentation/devicetree/bindings/mfd/max77620.txt @@ -4,7 +4,8 @@ Required properties: ------------------- - compatible: Must be one of "maxim,max77620" - "maxim,max20024". + "maxim,max20024" + "maxim,max77663" - reg: I2C device address. Optional properties: @@ -17,6 +18,11 @@ Optional properties: IRQ numbers for different interrupt source of MAX77620 are defined at dt-bindings/mfd/max77620.h. +- system-power-controller: Indicates that this PMIC is controlling the + system power, see [1] for more details. + +[1] Documentation/devicetree/bindings/power/power-controller.txt + Optional subnodes and their properties: ======================================= @@ -105,6 +111,7 @@ Optional properties: Here supported time periods by device in microseconds are as follows: MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds. MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. +MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. -maxim,power-ok-control: configure map power ok bit 1: Enables POK(Power OK) to control nRST_IO and GPIO1 diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt new file mode 100644 index 000000000000..b529d8d19335 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max77650.txt @@ -0,0 +1,46 @@ +MAX77650 ultra low-power PMIC from Maxim Integrated. + +Required properties: +------------------- +- compatible: Must be "maxim,max77650" +- reg: I2C device address. +- interrupts: The interrupt on the parent the controller is + connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Must be <2>. + +- gpio-controller: Marks the device node as a gpio controller. +- #gpio-cells: Must be <2>. The first cell is the pin number and + the second cell is used to specify the gpio active + state. + +Optional properties: +-------------------- +gpio-line-names: Single string containing the name of the GPIO line. + +The GPIO-controller module is represented as part of the top-level PMIC +node. The device exposes a single GPIO line. + +For device-tree bindings of other sub-modules (regulator, power supply, +LEDs and onkey) refer to the binding documents under the respective +sub-system directories. + +For more details on GPIO bindings, please refer to the generic GPIO DT +binding document <devicetree/bindings/gpio/gpio.txt>. + +Example: +-------- + + pmic@48 { + compatible = "maxim,max77650"; + reg = <0x48>; + + interrupt-controller; + interrupt-parent = <&gpio2>; + #interrupt-cells = <2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "max77650-charger"; + }; diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt index c885cf89b8ce..980394d701a7 100644 --- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt @@ -4,7 +4,6 @@ TI LMU driver supports lighting devices below. Name Child nodes ------ --------------------------------- - LM3532 Backlight LM3631 Backlight and regulator LM3632 Backlight and regulator LM3633 Backlight, LED and fault monitor @@ -13,7 +12,6 @@ TI LMU driver supports lighting devices below. Required properties: - compatible: Should be one of: - "ti,lm3532" "ti,lm3631" "ti,lm3632" "ti,lm3633" @@ -23,7 +21,6 @@ Required properties: 0x11 for LM3632 0x29 for LM3631 0x36 for LM3633, LM3697 - 0x38 for LM3532 0x63 for LM3695 Optional property: @@ -47,23 +44,6 @@ Optional nodes: [2] ../leds/leds-lm3633.txt [3] ../regulator/lm363x-regulator.txt -lm3532@38 { - compatible = "ti,lm3532"; - reg = <0x38>; - - enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; - - backlight { - compatible = "ti,lm3532-backlight"; - - lcd { - led-sources = <0 1 2>; - ramp-up-msec = <30>; - ramp-down-msec = <0>; - }; - }; -}; - lm3631@29 { compatible = "ti,lm3631"; reg = <0x29>; diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.txt b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt new file mode 100644 index 000000000000..e6d0fb6ff94e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt @@ -0,0 +1,28 @@ +Battery charger driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The charger is represented as a sub-node of the PMIC node on the device tree. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-charger" + +Optional properties: +-------------------- +- input-voltage-min-microvolt: Minimum CHGIN regulation voltage. Must be one + of: 4000000, 4100000, 4200000, 4300000, + 4400000, 4500000, 4600000, 4700000. +- input-current-limit-microamp: CHGIN input current limit (in microamps). Must + be one of: 95000, 190000, 285000, 380000, + 475000. + +Example: +-------- + + charger { + compatible = "maxim,max77650-charger"; + input-voltage-min-microvolt = <4200000>; + input-current-limit-microamp = <285000>; + }; |