diff options
Diffstat (limited to 'Documentation/devicetree')
79 files changed, 1947 insertions, 402 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 325c6fd3566d..99015cef8bb1 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -91,13 +91,11 @@ properties: - description: Boards with the Amlogic Meson GXL S905X SoC items: - enum: - - amediatech,x96-max - amlogic,p212 - hwacom,amazetv - khadas,vim - libretech,cc - nexbox,a95x - - seirobotics,sei510 - const: amlogic,s905x - const: amlogic,meson-gxl @@ -129,16 +127,33 @@ properties: - const: amlogic,a113d - const: amlogic,meson-axg - - description: Boards with the Amlogic Meson G12A S905D2 SoC + - description: Boards with the Amlogic Meson G12A S905D2/X2/Y2 SoC items: - enum: + - amediatech,x96-max - amlogic,u200 + - seirobotics,sei510 - const: amlogic,g12a + - description: Boards with the Amlogic Meson G12B A311D SoC + items: + - enum: + - khadas,vim3 + - const: amlogic,a311d + - const: amlogic,g12b + - description: Boards with the Amlogic Meson G12B S922X SoC items: - enum: - hardkernel,odroid-n2 + - khadas,vim3 + - const: amlogic,s922x - const: amlogic,g12b + - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC + items: + - enum: + - seirobotics,sei610 + - khadas,vim3l + - const: amlogic,sm1 ... diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt index 317a2fc3667a..083dbf96ee00 100644 --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt @@ -73,6 +73,16 @@ Required properties: as used by the firmware. Refer to platform details for your implementation for the IDs to use. +Reset signal bindings for the reset domains based on SCMI Message Protocol +------------------------------------------------------------ + +This binding for the SCMI reset domain providers uses the generic reset +signal binding[5]. + +Required properties: + - #reset-cells : Should be 1. Contains the reset domain ID value used + by SCMI commands. + SRAM and Shared Memory for SCMI ------------------------------- @@ -93,6 +103,7 @@ Required sub-node properties: [2] Documentation/devicetree/bindings/power/power_domain.txt [3] Documentation/devicetree/bindings/thermal/thermal.txt [4] Documentation/devicetree/bindings/sram/sram.txt +[5] Documentation/devicetree/bindings/reset/reset.txt Example: @@ -152,6 +163,11 @@ firmware { reg = <0x15>; #thermal-sensor-cells = <1>; }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; }; }; @@ -166,6 +182,7 @@ hdlcd@7ff60000 { reg = <0 0x7ff60000 0 0x1000>; clocks = <&scmi_clk 4>; power-domains = <&scmi_devpd 1>; + resets = <&scmi_reset 10>; }; thermal-zones { diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index aa40b074b864..727e0ffc702b 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -175,6 +175,7 @@ properties: - amlogic,meson8-smp - amlogic,meson8b-smp - arm,realview-smp + - aspeed,ast2600-smp - brcm,bcm11351-cpu-method - brcm,bcm23550 - brcm,bcm2836-smp diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 7294ac36f4c0..1b4b4e6573b5 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -161,6 +161,20 @@ properties: items: - enum: - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board + - kontron,imx6ul-n6310-som # Kontron N6310 SOM + - const: fsl,imx6ul + + - description: Kontron N6310 S Board + items: + - const: kontron,imx6ul-n6310-s + - const: kontron,imx6ul-n6310-som + - const: fsl,imx6ul + + - description: Kontron N6310 S 43 Board + items: + - const: kontron,imx6ul-n6310-s-43 + - const: kontron,imx6ul-n6310-s + - const: kontron,imx6ul-n6310-som - const: fsl,imx6ul - description: i.MX6ULL based Boards @@ -188,6 +202,7 @@ properties: - fsl,imx7d-sdb # i.MX7 SabreSD Board - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM + - zii,imx7d-rmu2 # ZII RMU2 Board - zii,imx7d-rpu2 # ZII RPU2 Board - const: fsl,imx7d @@ -214,16 +229,26 @@ properties: - fsl,imx8mm-evk # i.MX8MM EVK Board - const: fsl,imx8mm + - description: i.MX8MN based Boards + items: + - enum: + - fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board + - const: fsl,imx8mn + - description: i.MX8MQ based Boards items: - enum: + - boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board - fsl,imx8mq-evk # i.MX8MQ EVK Board - purism,librem5-devkit # Purism Librem5 devkit + - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse + - technexion,pico-pi-imx8m # TechNexion PICO-PI-8M evk - const: fsl,imx8mq - description: i.MX8QXP based Boards items: - enum: + - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board - fsl,imx8qxp-mek # i.MX8QXP MEK Board - const: fsl,imx8qxp @@ -283,6 +308,7 @@ properties: - description: LS1046A based Boards items: - enum: + - fsl,ls1046a-frwy - fsl,ls1046a-qds - fsl,ls1046a-rdb - const: fsl,ls1046a diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index a4ad2eb926f9..4043c5046441 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -48,6 +48,10 @@ properties: - const: mediatek,mt6765 - items: - enum: + - mediatek,mt6779-evb + - const: mediatek,mt6779 + - items: + - enum: - mediatek,mt6795-evb - const: mediatek,mt6795 - items: diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 54ef6b6b9189..e39d8f02e33c 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -45,6 +45,7 @@ description: | mtp sbc hk01 + qrd The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> where the minor number may be omitted when it's zero, i.e. v1.0 is the same @@ -116,6 +117,13 @@ properties: - const: qcom,msm8916 - items: + - enum: + - longcheer,l8150 + - samsung,a3u-eur + - samsung,a5u-eur + - const: qcom,msm8916 + + - items: - const: qcom,msm8996-mtp - items: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 34865042f4e4..c82c5e57d44c 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -128,6 +128,21 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: Google Fievel (AOPEN Chromebox Mini) + items: + - const: google,veyron-fievel-rev8 + - const: google,veyron-fievel-rev7 + - const: google,veyron-fievel-rev6 + - const: google,veyron-fievel-rev5 + - const: google,veyron-fievel-rev4 + - const: google,veyron-fievel-rev3 + - const: google,veyron-fievel-rev2 + - const: google,veyron-fievel-rev1 + - const: google,veyron-fievel-rev0 + - const: google,veyron-fievel + - const: google,veyron + - const: rockchip,rk3288 + - description: Google Gru (dev-board) items: - const: google,gru-rev15 @@ -311,6 +326,21 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: Google Tiger (AOpen Chromebase Mini) + items: + - const: google,veyron-tiger-rev8 + - const: google,veyron-tiger-rev7 + - const: google,veyron-tiger-rev6 + - const: google,veyron-tiger-rev5 + - const: google,veyron-tiger-rev4 + - const: google,veyron-tiger-rev3 + - const: google,veyron-tiger-rev2 + - const: google,veyron-tiger-rev1 + - const: google,veyron-tiger-rev0 + - const: google,veyron-tiger + - const: google,veyron + - const: rockchip,rk3288 + - description: Haoyu MarsBoard RK3066 items: - const: haoyu,marsboard-rk3066 @@ -329,6 +359,16 @@ properties: - khadas,edge-v - const: rockchip,rk3399 + - description: Mecer Xtreme Mini S6 + items: + - const: mecer,xms6 + - const: rockchip,rk3229 + + - description: Leez RK3399 P710 + items: + - const: leez,p710 + - const: rockchip,rk3399 + - description: mqmaker MiQi items: - const: mqmaker,miqi @@ -424,11 +464,6 @@ properties: - rockchip,rk3288-evb-rk808 - const: rockchip,rk3288 - - description: Rockchip RK3288 Fennec - items: - - const: rockchip,rk3288-fennec - - const: rockchip,rk3288 - - description: Rockchip RK3328 Evaluation board items: - const: rockchip,rk3328-evb diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 000a00d12d6a..972b1e9ee804 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -353,6 +353,12 @@ properties: - const: licheepi,licheepi-zero - const: allwinner,sun8i-v3s + - description: Lichee Zero Plus (with S3, without eMMC/SPI Flash) + items: + - const: sipeed,lichee-zero-plus + - const: sochip,s3 + - const: allwinner,sun8i-v3 + - description: Linksprite PCDuino items: - const: linksprite,a10-pcduino @@ -568,6 +574,11 @@ properties: - const: olimex,a64-olinuxino - const: allwinner,sun50i-a64 + - description: Olimex A64-OlinuXino (with eMMC) + items: + - const: olimex,a64-olinuxino-emmc + - const: allwinner,sun50i-a64 + - description: Olimex A64 Teres-I items: - const: olimex,a64-teres-i @@ -671,6 +682,11 @@ properties: - const: sinlinx,sina33 - const: allwinner,sun8i-a33 + - description: Tanix TX6 + items: + - const: oranth,tanix-tx6 + - const: allwinner,sun50i-h6 + - description: TBS A711 Tablet items: - const: tbs-biometrics,a711 diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt index dda7d6d66479..1b1d1c5c21ea 100644 --- a/Documentation/devicetree/bindings/bus/imx-weim.txt +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt @@ -44,6 +44,10 @@ Optional properties: what bootloader sets up in IOMUXC_GPR1[11:0] will be used. + - fsl,burst-clk-enable For "fsl,imx50-weim" and "fsl,imx6q-weim" type of + devices, the presence of this property indicates that + the weim bus should operate in Burst Clock Mode. + Timing property for child nodes. It is mandatory, not optional. - fsl,weim-cs-timing: The timing array, contains timing values for the diff --git a/Documentation/devicetree/bindings/bus/moxtet.txt b/Documentation/devicetree/bindings/bus/moxtet.txt new file mode 100644 index 000000000000..fb50fc865336 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/moxtet.txt @@ -0,0 +1,46 @@ +Turris Mox module status and configuration bus (over SPI) + +Required properties: + - compatible : Should be "cznic,moxtet" + - #address-cells : Has to be 1 + - #size-cells : Has to be 0 + - spi-cpol : Required inverted clock polarity + - spi-cpha : Required shifted clock phase + - interrupts : Must contain reference to the shared interrupt line + - interrupt-controller : Required + - #interrupt-cells : Has to be 1 + +For other required and optional properties of SPI slave nodes please refer to +../spi/spi-bus.txt. + +Required properties of subnodes: + - reg : Should be position on the Moxtet bus (how many Moxtet + modules are between this module and CPU module, so + either 0 or a positive integer) + +The driver finds the devices connected to the bus by itself, but it may be +needed to reference some of them from other parts of the device tree. In that +case the devices can be defined as subnodes of the moxtet node. + +Example: + + moxtet@1 { + compatible = "cznic,moxtet"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <10000000>; + spi-cpol; + spi-cpha; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + + moxtet_sfp: gpio@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + } + }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt index 0f777749f4f1..b3957d10d241 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt @@ -22,6 +22,7 @@ Required Properties: components. - resets : phandle of the internal reset line - #clock-cells : should be 1. +- #reset-cells : should be 1 on the g12a (and following) soc family Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt index 6eaa52092313..7ccecd5c02c1 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -11,6 +11,7 @@ Required Properties: "amlogic,axg-clkc" for AXG SoC. "amlogic,g12a-clkc" for G12A SoC. "amlogic,g12b-clkc" for G12B SoC. + "amlogic,sm1-clkc" for SM1 SoC. - clocks : list of clock phandle, one for each entry clock-names. - clock-names : should contain the following: * "xtal": the platform xtal diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml new file mode 100644 index 000000000000..622f3658bd9f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/clock/imx8mn-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Nano Clock Control Module Binding + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: | + NXP i.MX8M Nano clock control module is an integrated clock controller, which + generates and supplies to all modules. + +properties: + compatible: + const: fsl,imx8mn-ccm + + reg: + maxItems: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ext1 clock input + - description: ext2 clock input + - description: ext3 clock input + - description: ext4 clock input + + clock-names: + items: + - const: osc_32k + - const: osc_24m + - const: clk_ext1 + - const: clk_ext2 + - const: clk_ext3 + - const: clk_ext4 + + '#clock-cells': + const: 1 + description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h + for the full list of i.MX8M Nano clock IDs. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +examples: + # Clock Control Module node: + - | + clk: clock-controller@30380000 { + compatible = "fsl,imx8mn-ccm"; + reg = <0x0 0x30380000 0x0 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, + <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", + "clk_ext2", "clk_ext3", "clk_ext4"; + }; + + # Required external clocks for Clock Control Module node: + - | + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock-ext2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock-ext3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock-ext4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/topology.txt b/Documentation/devicetree/bindings/cpu/cpu-topology.txt index b0d80c0fb265..99918189403c 100644 --- a/Documentation/devicetree/bindings/arm/topology.txt +++ b/Documentation/devicetree/bindings/cpu/cpu-topology.txt @@ -1,21 +1,19 @@ =========================================== -ARM topology binding description +CPU topology binding description =========================================== =========================================== 1 - Introduction =========================================== -In an ARM system, the hierarchy of CPUs is defined through three entities that +In a SMP system, the hierarchy of CPUs is defined through three entities that are used to describe the layout of physical CPUs in the system: +- socket - cluster - core - thread -The cpu nodes (bindings defined in [1]) represent the devices that -correspond to physical CPUs and are to be mapped to the hierarchy levels. - The bottom hierarchy level sits at core or thread level depending on whether symmetric multi-threading (SMT) is supported or not. @@ -24,33 +22,31 @@ threads existing in the system and map to the hierarchy level "thread" above. In systems where SMT is not supported "cpu" nodes represent all cores present in the system and map to the hierarchy level "core" above. -ARM topology bindings allow one to associate cpu nodes with hierarchical groups +CPU topology bindings allow one to associate cpu nodes with hierarchical groups corresponding to the system hierarchy; syntactically they are defined as device tree nodes. -The remainder of this document provides the topology bindings for ARM, based -on the Devicetree Specification, available from: +Currently, only ARM/RISC-V intend to use this cpu topology binding but it may be +used for any other architecture as well. -https://www.devicetree.org/specifications/ +The cpu nodes, as per bindings defined in [4], represent the devices that +correspond to physical CPUs and are to be mapped to the hierarchy levels. -If not stated otherwise, whenever a reference to a cpu node phandle is made its -value must point to a cpu node compliant with the cpu node bindings as -documented in [1]. A topology description containing phandles to cpu nodes that are not compliant -with bindings standardized in [1] is therefore considered invalid. +with bindings standardized in [4] is therefore considered invalid. =========================================== 2 - cpu-map node =========================================== -The ARM CPU topology is defined within the cpu-map node, which is a direct +The ARM/RISC-V CPU topology is defined within the cpu-map node, which is a direct child of the cpus node and provides a container where the actual topology nodes are listed. - cpu-map node - Usage: Optional - On ARM SMP systems provide CPUs topology to the OS. - ARM uniprocessor systems do not require a topology + Usage: Optional - On SMP systems provide CPUs topology to the OS. + Uniprocessor systems do not require a topology description and therefore should not define a cpu-map node. @@ -63,21 +59,23 @@ nodes are listed. The cpu-map node's child nodes can be: - - one or more cluster nodes + - one or more cluster nodes or + - one or more socket nodes in a multi-socket system Any other configuration is considered invalid. -The cpu-map node can only contain three types of child nodes: +The cpu-map node can only contain 4 types of child nodes: +- socket node - cluster node - core node - thread node whose bindings are described in paragraph 3. -The nodes describing the CPU topology (cluster/core/thread) can only -be defined within the cpu-map node and every core/thread in the system -must be defined within the topology. Any other configuration is +The nodes describing the CPU topology (socket/cluster/core/thread) can +only be defined within the cpu-map node and every core/thread in the +system must be defined within the topology. Any other configuration is invalid and therefore must be ignored. =========================================== @@ -85,26 +83,44 @@ invalid and therefore must be ignored. =========================================== cpu-map child nodes must follow a naming convention where the node name -must be "clusterN", "coreN", "threadN" depending on the node type (ie -cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes which -are siblings within a single common parent node must be given a unique and +must be "socketN", "clusterN", "coreN", "threadN" depending on the node type +(ie socket/cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes +which are siblings within a single common parent node must be given a unique and sequential N value, starting from 0). cpu-map child nodes which do not share a common parent node can have the same name (ie same number N as other cpu-map child nodes at different device tree levels) since name uniqueness will be guaranteed by the device tree hierarchy. =========================================== -3 - cluster/core/thread node bindings +3 - socket/cluster/core/thread node bindings =========================================== -Bindings for cluster/cpu/thread nodes are defined as follows: +Bindings for socket/cluster/cpu/thread nodes are defined as follows: + +- socket node + + Description: must be declared within a cpu-map node, one node + per physical socket in the system. A system can + contain single or multiple physical socket. + The association of sockets and NUMA nodes is beyond + the scope of this bindings, please refer [2] for + NUMA bindings. + + This node is optional for a single socket system. + + The socket node name must be "socketN" as described in 2.1 above. + A socket node can not be a leaf node. + + A socket node's child nodes must be one or more cluster nodes. + + Any other configuration is considered invalid. - cluster node Description: must be declared within a cpu-map node, one node per cluster. A system can contain several layers of - clustering and cluster nodes can be contained in parent - cluster nodes. + clustering within a single physical socket and cluster + nodes can be contained in parent cluster nodes. The cluster node name must be "clusterN" as described in 2.1 above. A cluster node can not be a leaf node. @@ -164,90 +180,93 @@ Bindings for cluster/cpu/thread nodes are defined as follows: 4 - Example dts =========================================== -Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters): +Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters in a single +physical socket): cpus { #size-cells = <0>; #address-cells = <2>; cpu-map { - cluster0 { + socket0 { cluster0 { - core0 { - thread0 { - cpu = <&CPU0>; + cluster0 { + core0 { + thread0 { + cpu = <&CPU0>; + }; + thread1 { + cpu = <&CPU1>; + }; }; - thread1 { - cpu = <&CPU1>; - }; - }; - core1 { - thread0 { - cpu = <&CPU2>; - }; - thread1 { - cpu = <&CPU3>; + core1 { + thread0 { + cpu = <&CPU2>; + }; + thread1 { + cpu = <&CPU3>; + }; }; }; - }; - cluster1 { - core0 { - thread0 { - cpu = <&CPU4>; - }; - thread1 { - cpu = <&CPU5>; + cluster1 { + core0 { + thread0 { + cpu = <&CPU4>; + }; + thread1 { + cpu = <&CPU5>; + }; }; - }; - core1 { - thread0 { - cpu = <&CPU6>; - }; - thread1 { - cpu = <&CPU7>; - }; - }; - }; - }; - - cluster1 { - cluster0 { - core0 { - thread0 { - cpu = <&CPU8>; - }; - thread1 { - cpu = <&CPU9>; - }; - }; - core1 { - thread0 { - cpu = <&CPU10>; - }; - thread1 { - cpu = <&CPU11>; + core1 { + thread0 { + cpu = <&CPU6>; + }; + thread1 { + cpu = <&CPU7>; + }; }; }; }; cluster1 { - core0 { - thread0 { - cpu = <&CPU12>; + cluster0 { + core0 { + thread0 { + cpu = <&CPU8>; + }; + thread1 { + cpu = <&CPU9>; + }; }; - thread1 { - cpu = <&CPU13>; + core1 { + thread0 { + cpu = <&CPU10>; + }; + thread1 { + cpu = <&CPU11>; + }; }; }; - core1 { - thread0 { - cpu = <&CPU14>; + + cluster1 { + core0 { + thread0 { + cpu = <&CPU12>; + }; + thread1 { + cpu = <&CPU13>; + }; }; - thread1 { - cpu = <&CPU15>; + core1 { + thread0 { + cpu = <&CPU14>; + }; + thread1 { + cpu = <&CPU15>; + }; }; }; }; @@ -470,6 +489,65 @@ cpus { }; }; +Example 3: HiFive Unleashed (RISC-V 64 bit, 4 core system) + +{ + #address-cells = <2>; + #size-cells = <2>; + compatible = "sifive,fu540g", "sifive,fu500"; + model = "sifive,hifive-unleashed-a00"; + + ... + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + socket0 { + cluster0 { + core0 { + cpu = <&CPU1>; + }; + core1 { + cpu = <&CPU2>; + }; + core2 { + cpu0 = <&CPU2>; + }; + core3 { + cpu0 = <&CPU3>; + }; + }; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "sifive,rocket0", "riscv"; + reg = <0x1>; + } + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "sifive,rocket0", "riscv"; + reg = <0x2>; + } + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "sifive,rocket0", "riscv"; + reg = <0x3>; + } + CPU4: cpu@4 { + device_type = "cpu"; + compatible = "sifive,rocket0", "riscv"; + reg = <0x4>; + } + } +}; =============================================================================== [1] ARM Linux kernel documentation Documentation/devicetree/bindings/arm/cpus.yaml +[2] Devicetree NUMA binding description + Documentation/devicetree/bindings/numa.txt +[3] RISC-V Linux kernel documentation + Documentation/devicetree/bindings/riscv/cpus.txt +[4] https://www.devicetree.org/specifications/ diff --git a/Documentation/devicetree/bindings/eeprom/at25.txt b/Documentation/devicetree/bindings/eeprom/at25.txt index b3bde97dc199..42577dd113dd 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.txt +++ b/Documentation/devicetree/bindings/eeprom/at25.txt @@ -3,6 +3,7 @@ EEPROMs (SPI) compatible with Atmel at25. Required properties: - compatible : Should be "<vendor>,<type>", and generic value "atmel,at25". Example "<vendor>,<type>" values: + "anvo,anv32e61w" "microchip,25lc040" "st,m95m02" "st,m95256" diff --git a/Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt b/Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt new file mode 100644 index 000000000000..338169dea7bb --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt @@ -0,0 +1,19 @@ +Turris Mox rWTM firmware driver + +Required properties: + - compatible : Should be "cznic,turris-mox-rwtm" + - mboxes : Must contain a reference to associated mailbox + +This device tree node should be used on Turris Mox, or potentially another A3700 +compatible device running the Mox's rWTM firmware in the secure processor (for +example it is possible to flash this firmware into EspressoBin). + +Example: + + firmware { + turris-mox-rwtm { + compatible = "cznic,turris-mox-rwtm"; + mboxes = <&rwtm 0>; + status = "okay"; + }; + }; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index 41f133a4e2fa..3f29ea04b5fe 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -9,14 +9,16 @@ Required properties: - compatible: must contain one of the following: * "qcom,scm-apq8064" * "qcom,scm-apq8084" + * "qcom,scm-ipq4019" * "qcom,scm-msm8660" * "qcom,scm-msm8916" * "qcom,scm-msm8960" * "qcom,scm-msm8974" * "qcom,scm-msm8996" * "qcom,scm-msm8998" - * "qcom,scm-ipq4019" + * "qcom,scm-sc7180" * "qcom,scm-sdm845" + * "qcom,scm-sm8150" and: * "qcom,scm" - clocks: Specifies clocks needed by the SCM interface, if any: diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt index 7e9b586770b0..b2033fc3a71a 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt @@ -2,7 +2,8 @@ Aspeed GPIO controller Device Tree Bindings ------------------------------------------- Required properties: -- compatible : Either "aspeed,ast2400-gpio" or "aspeed,ast2500-gpio" +- compatible : Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio", + or "aspeed,ast2600-gpio". - #gpio-cells : Should be two - First cell is the GPIO line number @@ -17,7 +18,9 @@ Required properties: Optional properties: -- clocks : A phandle to the clock to use for debounce timings +- clocks : A phandle to the clock to use for debounce timings +- ngpios : Number of GPIOs controlled by this controller. Should be set + when there are multiple GPIO controllers on a SoC (ast2600). The gpio and interrupt properties are further described in their respective bindings documentation: diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt index bc6b4b62df83..cd91d61eac31 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt @@ -6,6 +6,7 @@ Required Properties: 66AK2E SoCs "ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G "ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654 + "ti,j721e-gpio", "ti,keystone-gpio": for J721E SoCs - reg: Physical base address of the controller and the size of memory mapped registers. diff --git a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt new file mode 100644 index 000000000000..410759de9f09 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt @@ -0,0 +1,18 @@ +Turris Mox Moxtet GPIO expander via Moxtet bus + +Required properties: + - compatible : Should be "cznic,moxtet-gpio". + - gpio-controller : Marks the device node as a GPIO controller. + - #gpio-cells : Should be two. For consumer use see gpio.txt. + +Other properties are required for a Moxtet bus device, please refer to +Documentation/devicetree/bindings/bus/moxtet.txt. + +Example: + + moxtet_sfp: gpio@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + } diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt index 69d46162d0f5..cd28e932bf50 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt @@ -4,7 +4,7 @@ Required properties: - compatible : Should be "fsl,<soc>-gpio" The following <soc>s are known to be supported: mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq, - ls1021a, ls1043a, ls2080a. + ls1021a, ls1043a, ls2080a, ls1028a, ls1088a. - reg : Address and length of the register set for the device - interrupts : Should be the port interrupt shared by all 32 pins. - #gpio-cells : Should be two. The first cell is the pin number and @@ -37,3 +37,17 @@ gpio0: gpio@2300000 { interrupt-controller; #interrupt-cells = <2>; }; + + +Example of gpio-controller node for a ls1028a/ls1088a SoC: + +gpio1: gpio@2300000 { + compatible = "fsl,ls1028a-gpio", "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + little-endian; +}; diff --git a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt new file mode 100644 index 000000000000..d4d83916c09d --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt @@ -0,0 +1,45 @@ +Aspeed SGPIO controller Device Tree Bindings +-------------------------------------------- + +This SGPIO controller is for ASPEED AST2500 SoC, it supports up to 80 full +featured Serial GPIOs. Each of the Serial GPIO pins can be programmed to +support the following options: +- Support interrupt option for each input port and various interrupt + sensitivity option (level-high, level-low, edge-high, edge-low) +- Support reset tolerance option for each output port +- Directly connected to APB bus and its shift clock is from APB bus clock + divided by a programmable value. +- Co-work with external signal-chained TTL components (74LV165/74LV595) + +Required properties: + +- compatible : Should be one of + "aspeed,ast2400-sgpio", "aspeed,ast2500-sgpio" +- #gpio-cells : Should be 2, see gpio.txt +- reg : Address and length of the register set for the device +- gpio-controller : Marks the device node as a GPIO controller +- interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt +- interrupt-controller : Mark the GPIO controller as an interrupt-controller +- ngpios : number of GPIO lines, see gpio.txt + (should be multiple of 8, up to 80 pins) +- clocks : A phandle to the APB clock for SGPM clock division +- bus-frequency : SGPM CLK frequency + +The sgpio and interrupt properties are further described in their respective +bindings documentation: + +- Documentation/devicetree/bindings/gpio/gpio.txt +- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + + Example: + sgpio: sgpio@1e780200 { + #gpio-cells = <2>; + compatible = "aspeed,ast2500-sgpio"; + gpio-controller; + interrupts = <40>; + reg = <0x1e780200 0x0100>; + clocks = <&syscon ASPEED_CLK_APB>; + interrupt-controller; + ngpios = <8>; + bus-frequency = <12000000>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/as370.txt b/Documentation/devicetree/bindings/hwmon/as370.txt new file mode 100644 index 000000000000..d102fe765124 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/as370.txt @@ -0,0 +1,11 @@ +Bindings for Synaptics AS370 PVT sensors + +Required properties: +- compatible : "syna,as370-hwmon" +- reg : address and length of the register set. + +Example: + hwmon@ea0810 { + compatible = "syna,as370-hwmon"; + reg = <0xea0810 0xc>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt index f68a0a68fc52..1036f65fb778 100644 --- a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt +++ b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt @@ -1,8 +1,10 @@ -Device-tree bindings for IBM Common Form Factor Power Supply Version 1 ----------------------------------------------------------------------- +Device-tree bindings for IBM Common Form Factor Power Supply Versions 1 and 2 +----------------------------------------------------------------------------- Required properties: - - compatible = "ibm,cffps1"; + - compatible : Must be one of the following: + "ibm,cffps1" + "ibm,cffps2" - reg = < I2C bus address >; : Address of the power supply on the I2C bus. diff --git a/Documentation/devicetree/bindings/hwmon/lm75.txt b/Documentation/devicetree/bindings/hwmon/lm75.txt index 586b5ed70be7..273616702c51 100644 --- a/Documentation/devicetree/bindings/hwmon/lm75.txt +++ b/Documentation/devicetree/bindings/hwmon/lm75.txt @@ -15,6 +15,7 @@ Required properties: "maxim,max31725", "maxim,max31726", "maxim,mcp980x", + "nxp,pct2075", "st,stds75", "st,stlm75", "microchip,tcn75", diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt index 2907dab56298..8b444b94e92f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt @@ -42,7 +42,7 @@ Optional properties: This means that no unrelated I2C transactions are allowed on the parent I2C adapter for the complete multiplexed I2C transaction. The properties of mux-locked and parent-locked multiplexers are discussed - in more detail in Documentation/i2c/i2c-topology. + in more detail in Documentation/i2c/i2c-topology.rst. For each i2c child node, an I2C child bus will be created. They will be numbered based on their order in the device tree. diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml index 001f2b7abad0..c779000515d6 100644 --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -26,6 +26,9 @@ properties: - items: - const: allwinner,sun50i-a64-i2c - const: allwinner,sun6i-a31-i2c + - items: + - const: allwinner,sun50i-h6-i2c + - const: allwinner,sun6i-a31-i2c - const: marvell,mv64xxx-i2c - const: marvell,mv78230-i2c diff --git a/Documentation/devicetree/bindings/hwmon/ads1015.txt b/Documentation/devicetree/bindings/iio/adc/ads1015.txt index 918a507d1159..918a507d1159 100644 --- a/Documentation/devicetree/bindings/hwmon/ads1015.txt +++ b/Documentation/devicetree/bindings/iio/adc/ads1015.txt diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml new file mode 100644 index 000000000000..d74962c0f5ae --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/allwinner,sun8i-a33-ths.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A33 Thermal Sensor Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#io-channel-cells": + const: 0 + + "#thermal-sensor-cells": + const: 0 + + compatible: + const: allwinner,sun8i-a33-ths + + reg: + maxItems: 1 + +required: + - "#io-channel-cells" + - "#thermal-sensor-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + ths: ths@1c25000 { + compatible = "allwinner,sun8i-a33-ths"; + reg = <0x01c25000 0x100>; + #thermal-sensor-cells = <0>; + #io-channel-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt index 7d531d5fff29..684bb1cd75ec 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt @@ -16,6 +16,7 @@ Required properties: "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912) "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X) "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2) + "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3) - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller. - #interrupt-cells : Specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index c34df35a25fc..1fe147daca4c 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -44,11 +44,13 @@ properties: be at least 4. The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI - interrupts. Other values are reserved for future use. + interrupts, 2 for interrupts in the Extended SPI range, 3 for the + Extended PPI range. Other values are reserved for future use. The 2nd cell contains the interrupt number for the interrupt type. SPI interrupts are in the range [0-987]. PPI interrupts are in the - range [0-15]. + range [0-15]. Extented SPI interrupts are in the range [0-1023]. + Extended PPI interrupts are in the range [0-127]. The 3rd cell is the flags, encoded as follows: bits[3:0] trigger type and level flags. diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt index 0e312fea2a5d..84ced3f4179b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt @@ -15,6 +15,7 @@ Required properties: "mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629 "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795 "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797 + "mediatek,mt6779-sysirq", "mediatek,mt6577-sysirq": for MT6779 "mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765 "mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755 "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592 diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt index 6922db598def..ce59a505f5a4 100644 --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt @@ -11,10 +11,23 @@ ARM Short-Descriptor translation table format for address translation. | m4u (Multimedia Memory Management Unit) | + +--------+ + | | + gals0-rx gals1-rx (Global Async Local Sync rx) + | | + | | + gals0-tx gals1-tx (Global Async Local Sync tx) + | | Some SoCs may have GALS. + +--------+ + | SMI Common(Smart Multimedia Interface Common) | +----------------+------- | | + | gals-rx There may be GALS in some larbs. + | | + | | + | gals-tx | | SMI larb0 SMI larb1 ... SoCs have several SMI local arbiter(larb). (display) (vdec) @@ -36,6 +49,10 @@ each local arbiter. like display, video decode, and camera. And there are different ports in each larb. Take a example, There are many ports like MC, PP, VLD in the video decode local arbiter, all these ports are according to the video HW. + In some SoCs, there may be a GALS(Global Async Local Sync) module between +smi-common and m4u, and additional GALS module between smi-larb and +smi-common. GALS can been seen as a "asynchronous fifo" which could help +synchronize for the modules in different clock frequency. Required properties: - compatible : must be one of the following string: @@ -44,18 +61,25 @@ Required properties: "mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses generation one m4u HW. "mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW. + "mediatek,mt8183-m4u" for mt8183 which uses generation two m4u HW. - reg : m4u register base and size. - interrupts : the interrupt of m4u. - clocks : must contain one entry for each clock-names. -- clock-names : must be "bclk", It is the block clock of m4u. +- clock-names : Only 1 optional clock: + - "bclk": the block clock of m4u. + Here is the list which require this "bclk": + - mt2701, mt2712, mt7623 and mt8173. + Note that m4u use the EMI clock which always has been enabled before kernel + if there is no this "bclk". - mediatek,larbs : List of phandle to the local arbiters in the current Socs. Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort according to the local arbiter index, like larb0, larb1, larb2... - iommu-cells : must be 1. This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as defined in dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623 - dt-binding/memory/mt2712-larb-port.h for mt2712, and - dt-binding/memory/mt8173-larb-port.h for mt8173. + dt-binding/memory/mt2712-larb-port.h for mt2712, + dt-binding/memory/mt8173-larb-port.h for mt8173, and + dt-binding/memory/mt8183-larb-port.h for mt8183. Example: iommu: iommu@10205000 { diff --git a/Documentation/devicetree/bindings/media/amlogic,vdec.txt b/Documentation/devicetree/bindings/media/amlogic,vdec.txt index aabdd01bcf32..9b6aace86ca7 100644 --- a/Documentation/devicetree/bindings/media/amlogic,vdec.txt +++ b/Documentation/devicetree/bindings/media/amlogic,vdec.txt @@ -26,6 +26,7 @@ Required properties: - GXBB (S905) : "amlogic,gxbb-vdec" - GXL (S905X, S905D) : "amlogic,gxl-vdec" - GXM (S912) : "amlogic,gxm-vdec" + followed by the common "amlogic,gx-vdec" - reg: base address and size of he following memory-mapped regions : - dos - esparser @@ -47,8 +48,8 @@ Required properties: Example: -vdec: video-decoder@c8820000 { - compatible = "amlogic,gxbb-vdec"; +vdec: video-codec@c8820000 { + compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec"; reg = <0x0 0xc8820000 0x0 0x10000>, <0x0 0xc110a580 0x0 0xe4>; reg-names = "dos", "esparser"; diff --git a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt b/Documentation/devicetree/bindings/media/renesas,csi2.txt index 331409259752..331409259752 100644 --- a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt +++ b/Documentation/devicetree/bindings/media/renesas,csi2.txt diff --git a/Documentation/devicetree/bindings/media/rcar_imr.txt b/Documentation/devicetree/bindings/media/renesas,imr.txt index b0614153ed36..b0614153ed36 100644 --- a/Documentation/devicetree/bindings/media/rcar_imr.txt +++ b/Documentation/devicetree/bindings/media/renesas,imr.txt diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt index aa217b096279..aa217b096279 100644 --- a/Documentation/devicetree/bindings/media/rcar_vin.txt +++ b/Documentation/devicetree/bindings/media/renesas,vin.txt diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt index e937ddd871a6..b478ade4da65 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt @@ -2,9 +2,10 @@ SMI (Smart Multimedia Interface) Common The hardware block diagram please check bindings/iommu/mediatek,iommu.txt -Mediatek SMI have two generations of HW architecture, mt2712 and mt8173 use -the second generation of SMI HW while mt2701 uses the first generation HW of -SMI. +Mediatek SMI have two generations of HW architecture, here is the list +which generation the SoCs use: +generation 1: mt2701 and mt7623. +generation 2: mt2712, mt8173 and mt8183. There's slight differences between the two SMI, for generation 2, the register which control the iommu port is at each larb's register base. But @@ -19,6 +20,7 @@ Required properties: "mediatek,mt2712-smi-common" "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common" "mediatek,mt8173-smi-common" + "mediatek,mt8183-smi-common" - reg : the register and size of the SMI block. - power-domains : a phandle to the power domain of this local arbiter. - clocks : Must contain an entry for each entry in clock-names. @@ -30,6 +32,10 @@ Required properties: They may be the same if both source clocks are the same. - "async" : asynchronous clock, it help transform the smi clock into the emi clock domain, this clock is only needed by generation 1 smi HW. + and these 2 option clocks for generation 2 smi HW: + - "gals0": the path0 clock of GALS(Global Async Local Sync). + - "gals1": the path1 clock of GALS(Global Async Local Sync). + Here is the list which has this GALS: mt8183. Example: smi_common: smi@14022000 { diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt index 94eddcae77ab..4b369b3e1a69 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt @@ -8,6 +8,7 @@ Required properties: "mediatek,mt2712-smi-larb" "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb" "mediatek,mt8173-smi-larb" + "mediatek,mt8183-smi-larb" - reg : the register and size of this local arbiter. - mediatek,smi : a phandle to the smi_common node. - power-domains : a phandle to the power domain of this local arbiter. @@ -16,6 +17,9 @@ Required properties: - "apb" : Advanced Peripheral Bus clock, It's the clock for setting the register. - "smi" : It's the clock for transfer data and command. + and this optional clock name: + - "gals": the clock for GALS(Global Async Local Sync). + Here is the list which has this GALS: mt8183. Required property for mt2701, mt2712 and mt7623: - mediatek,larb-id :the hardware id of this larb. diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.txt index 9f78e6c82740..9f78e6c82740 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.txt diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml new file mode 100644 index 000000000000..4b1a09acb98b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#thermal-sensor-cells": + const: 0 + + compatible: + enum: + - allwinner,sun4i-a10-ts + - allwinner,sun5i-a13-ts + - allwinner,sun6i-a31-ts + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + allwinner,ts-attached: + $ref: /schemas/types.yaml#/definitions/flag + description: A touchscreen is attached to the controller + + allwinner,tp-sensitive-adjust: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 15 + default: 15 + description: Sensitivity of pen down detection + + allwinner,filter-type: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 3 + default: 1 + description: | + Select median and averaging filter. Sample used for median / + averaging filter: + 0: 4/2 + 1: 5/3 + 2: 8/4 + 3: 16/8 + +required: + - "#thermal-sensor-cells" + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + rtp: rtp@1c25000 { + compatible = "allwinner,sun4i-a10-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + allwinner,ts-attached; + #thermal-sensor-cells = <0>; + /* sensitive/noisy touch panel */ + allwinner,tp-sensitive-adjust = <0>; + allwinner,filter-type = <3>; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt deleted file mode 100644 index 86dd8191b04c..000000000000 --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt +++ /dev/null @@ -1,59 +0,0 @@ -Allwinner SoCs' GPADC Device Tree bindings ------------------------------------------- -The Allwinner SoCs all have an ADC that can also act as a thermal sensor -and sometimes as a touchscreen controller. - -Required properties: - - compatible: "allwinner,sun8i-a33-ths", - - reg: mmio address range of the chip, - - #thermal-sensor-cells: shall be 0, - - #io-channel-cells: shall be 0, - -Example: - ths: ths@1c25000 { - compatible = "allwinner,sun8i-a33-ths"; - reg = <0x01c25000 0x100>; - #thermal-sensor-cells = <0>; - #io-channel-cells = <0>; - }; - -sun4i, sun5i and sun6i SoCs are also supported via the older binding: - -sun4i resistive touchscreen controller --------------------------------------- - -Required properties: - - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or - "allwinner,sun6i-a31-ts" - - reg: mmio address range of the chip - - interrupts: interrupt to which the chip is connected - - #thermal-sensor-cells: shall be 0 - -Optional properties: - - allwinner,ts-attached : boolean indicating that an actual touchscreen - is attached to the controller - - allwinner,tp-sensitive-adjust : integer (4 bits) - adjust sensitivity of pen down detection - between 0 (least sensitive) and 15 - (defaults to 15) - - allwinner,filter-type : integer (2 bits) - select median and averaging filter - samples used for median / averaging filter - 0: 4/2 - 1: 5/3 - 2: 8/4 - 3: 16/8 - (defaults to 1) - -Example: - - rtp: rtp@1c25000 { - compatible = "allwinner,sun4i-a10-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - allwinner,ts-attached; - #thermal-sensor-cells = <0>; - /* sensitive/noisy touch panel */ - allwinner,tp-sensitive-adjust = <0>; - allwinner,filter-type = <3>; - }; diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml index df0280edef97..d2d4308596b8 100644 --- a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml @@ -30,16 +30,22 @@ properties: - const: allwinner,sun8i-a83t-mmc - const: allwinner,sun7i-a20-mmc - items: - - const: allwinner,sun50i-h6-emmc + - const: allwinner,sun8i-r40-emmc - const: allwinner,sun50i-a64-emmc - items: - - const: allwinner,sun50i-h6-mmc + - const: allwinner,sun8i-r40-mmc - const: allwinner,sun50i-a64-mmc - items: - - const: allwinner,sun8i-r40-emmc + - const: allwinner,sun50i-h5-emmc - const: allwinner,sun50i-a64-emmc - items: - - const: allwinner,sun8i-r40-mmc + - const: allwinner,sun50i-h5-mmc + - const: allwinner,sun50i-a64-mmc + - items: + - const: allwinner,sun50i-h6-emmc + - const: allwinner,sun50i-a64-emmc + - items: + - const: allwinner,sun50i-h6-mmc - const: allwinner,sun50i-a64-mmc reg: diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index 1edbb049cccb..7ca0aa7ccc0b 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -17,6 +17,8 @@ Required Properties: For this device it is strongly suggested to include arasan,soc-ctl-syscon. - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY Note: This binding has been deprecated and moved to [5]. + - "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel LGM eMMC PHY + For this device it is strongly suggested to include arasan,soc-ctl-syscon. [5] Documentation/devicetree/bindings/mmc/sdhci-am654.txt @@ -80,3 +82,18 @@ Example: phy-names = "phy_arasan"; #clock-cells = <0>; }; + + emmc: sdhci@ec700000 { + compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1"; + reg = <0xec700000 0x300>; + interrupt-parent = <&ioapic1>; + interrupts = <44 1>; + clocks = <&cgu0 LGM_CLK_EMMC5>, <&cgu0 LGM_CLK_NGI>, + <&cgu0 LGM_GCLK_EMMC>; + clock-names = "clk_xin", "clk_ahb", "gate"; + clock-output-names = "emmc_cardclock"; + #clock-cells = <0>; + phys = <&emmc_phy>; + phy-names = "phy_arasan"; + arasan,soc-ctl-syscon = <&sysconf>; + }; diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml new file mode 100644 index 000000000000..200de9396036 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright 2019 IBM Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED SD/SDIO/MMC Controller + +maintainers: + - Andrew Jeffery <andrew@aj.id.au> + - Ryan Chen <ryanchen.aspeed@gmail.com> + +description: |+ + The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO + Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if + only a single slot is enabled. + + The two slots are supported by a common configuration area. As the SDHCIs for + the slots are dependent on the common configuration area, they are described + as child nodes. + +properties: + compatible: + enum: + - aspeed,ast2400-sd-controller + - aspeed,ast2500-sd-controller + - aspeed,ast2600-sd-controller + reg: + maxItems: 1 + description: Common configuration registers + "#address-cells": + const: 1 + "#size-cells": + const: 1 + ranges: true + clocks: + maxItems: 1 + description: The SD/SDIO controller clock gate + +patternProperties: + "^sdhci@[0-9a-f]+$": + type: object + allOf: + - $ref: mmc-controller.yaml + properties: + compatible: + enum: + - aspeed,ast2400-sdhci + - aspeed,ast2500-sdhci + - aspeed,ast2600-sdhci + reg: + maxItems: 1 + description: The SDHCI registers + clocks: + maxItems: 1 + description: The SD bus clock + interrupts: + maxItems: 1 + description: The SD interrupt shared between both slots + sdhci,auto-cmd12: + type: boolean + description: Specifies that controller should use auto CMD12 + required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - clocks + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + sdc@1e740000 { + compatible = "aspeed,ast2500-sd-controller"; + reg = <0x1e740000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e740000 0x20000>; + clocks = <&syscon ASPEED_CLK_GATE_SDCLK>; + + sdhci0: sdhci@100 { + compatible = "aspeed,ast2500-sdhci"; + reg = <0x100 0x100>; + interrupts = <26>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + }; + + sdhci1: sdhci@200 { + compatible = "aspeed,ast2500-sdhci"; + reg = <0x200 0x100>; + interrupts = <26>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt index fa90d253dc7e..09d87cc1182a 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt @@ -6,10 +6,12 @@ by mmc.txt and the properties that represent the IPROC SDHCI controller. Required properties: - compatible : Should be one of the following "brcm,bcm2835-sdhci" + "brcm,bcm2711-emmc2" "brcm,sdhci-iproc-cygnus" "brcm,sdhci-iproc" -Use brcm2835-sdhci for Rasperry PI. +Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and +bcm2711-emmc2 for the additional eMMC2 controller on BCM2711. Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers restricted to 32bit host accesses to SDHCI registers. diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index b463e1268ac4..19e4a7d91511 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -5,6 +5,7 @@ Required properties: - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC. "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. + "renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC. "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC. "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. @@ -17,6 +18,8 @@ Required properties: "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC. + "renesas,can-r8a77990" if CAN controller is a part of R8A77990 SoC. + "renesas,can-r8a77995" if CAN controller is a part of R8A77995 SoC. "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 compatible device. @@ -33,7 +36,8 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". -Required properties for R8A7795, R8A7796 and R8A77965: +Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965, +R8A77990, and R8A77995: For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can be used by both CAN and CAN FD controller at the same time. It needs to be scaled to maximum frequency if any of these controllers use it. This is done diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt index 32f051f6d338..a901cd9be29e 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt @@ -4,6 +4,7 @@ Renesas R-Car CAN FD controller Device Tree Bindings Required properties: - compatible: Must contain one or more of the following: - "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers. + - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller. - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller. - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller. - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller. @@ -11,6 +12,7 @@ Required properties: - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller. - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller. - "renesas,r8a77990-canfd" for R8A77990 (R-Car E3) compatible controller. + - "renesas,r8a77995-canfd" for R8A77995 (R-Car D3) compatible controller. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first, followed by the @@ -29,13 +31,12 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each child node supports the "status" property only, which is used to enable/disable the respective channel. -Required properties for "renesas,r8a774c0-canfd", "renesas,r8a7795-canfd", -"renesas,r8a7796-canfd", "renesas,r8a77965-canfd", and "renesas,r8a77990-canfd" -compatible: -In R8A774C0, R8A7795, R8A7796, R8A77965, and R8A77990 SoCs, canfd clock is a -div6 clock and can be used by both CAN and CAN FD controller at the same time. -It needs to be scaled to maximum frequency if any of these controllers use it. -This is done using the below properties: +Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965, +R8A77990, and R8A77995: +In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN +and CAN FD controller at the same time. It needs to be scaled to maximum +frequency if any of these controllers use it. This is done using the below +properties: - assigned-clocks: phandle of canfd clock. - assigned-clock-rates: maximum frequency of this clock. diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml new file mode 100644 index 000000000000..aab70e8b681e --- /dev/null +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson Everything-Else Power Domains + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +description: |+ + The Everything-Else Power Domains node should be the child of a syscon + node with the required property: + + - compatible: Should be the following: + "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon" + + Refer to the the bindings described in + Documentation/devicetree/bindings/mfd/syscon.txt + +properties: + compatible: + enum: + - amlogic,meson-g12a-pwrc + - amlogic,meson-sm1-pwrc + + clocks: + minItems: 2 + + clock-names: + items: + - const: vpu + - const: vapb + + resets: + minItems: 11 + + reset-names: + items: + - const: viu + - const: venc + - const: vcbus + - const: bt656 + - const: rdma + - const: venci + - const: vencp + - const: vdac + - const: vdi6 + - const: vencl + - const: vid_lock + + "#power-domain-cells": + const: 1 + + amlogic,ao-sysctrl: + description: phandle to the AO sysctrl node + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - clocks + - clock-names + - resets + - reset-names + - "#power-domain-cells" + - amlogic,ao-sysctrl + +examples: + - | + pwrc: power-controller { + compatible = "amlogic,meson-sm1-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&rti>; + resets = <&reset_viu>, + <&reset_venc>, + <&reset_vcbus>, + <&reset_bt656>, + <&reset_rdma>, + <&reset_venci>, + <&reset_vencp>, + <&reset_vdac>, + <&reset_vdi6>, + <&reset_vencl>, + <&reset_vid_lock>; + reset-names = "viu", "venc", "vcbus", "bt656", + "rdma", "venci", "vencp", "vdac", + "vdi6", "vencl", "vid_lock"; + clocks = <&clk_vpu>, <&clk_vapb>; + clock-names = "vpu", "vapb"; + }; diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index 3ae9f1088845..b9f58e480349 100644 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -34,6 +34,9 @@ Optional input supply properties: - inl67-supply: The input supply for LDO_REG3 and LDO_REG4 Any standard regulator properties can be used to configure the single regulator. +regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified +for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h +file. The valid names for regulators are: - for act8846: @@ -47,6 +50,8 @@ The valid names for regulators are: Example: -------- +#include <dt-bindings/regulator/active-semi,8865-regulator.h> + i2c1: i2c@f0018000 { pmic: act8865@5b { compatible = "active-semi,act8865"; @@ -65,9 +70,19 @@ Example: regulator-name = "VCC_1V2"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; - regulator-suspend-mem-microvolt = <1150000>; - regulator-suspend-standby-microvolt = <1150000>; regulator-always-on; + + regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>, + <ACT8865_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <1150000>; + regulator-suspend-max-microvolt = <1150000>; + regulator-changeable-in-suspend; + regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>; + }; }; vcc_3v3_reg: DCDC_REG3 { @@ -82,6 +97,14 @@ Example: regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>, + <ACT8865_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vddfuse_reg: LDO_REG2 { diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml index a650b457085d..a78150c47aa2 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -19,9 +19,19 @@ description: allOf: - $ref: "regulator.yaml#" +if: + properties: + compatible: + contains: + const: regulator-fixed-clock + required: + - clocks + properties: compatible: - const: regulator-fixed + enum: + - const: regulator-fixed + - const: regulator-fixed-clock regulator-name: true @@ -29,6 +39,13 @@ properties: description: gpio to use for enable control maxItems: 1 + clocks: + description: + clock to use for enable control. This binding is only available if + the compatible is chosen to regulator-fixed-clock. The clock binding + is mandatory if compatible is chosen to regulator-fixed-clock. + maxItems: 1 + startup-delay-us: description: startup time in microseconds $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt new file mode 100644 index 000000000000..9a90a92f2d7e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt @@ -0,0 +1,358 @@ +MediaTek MT6358 Regulator + +All voltage regulators provided by the MT6358 PMIC are described as the +subnodes of the MT6358 regulators node. Each regulator is named according +to its regulator type, buck_<name> and ldo_<name>. The definition for each +of these nodes is defined using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu, + buck_vs2, buck_vmodem, buck_vs1 +LDO: + ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio, + ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others, + ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28, + ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18, + ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, + ldo_vsim2 + +Example: + + pmic { + compatible = "mediatek,mt6358"; + + mt6358regulator: mt6358regulator { + compatible = "mediatek,mt6358-regulator"; + + mt6358_vdram1_reg: buck_vdram1 { + regulator-compatible = "buck_vdram1"; + regulator-name = "vdram1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2087500>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + mt6358_vcore_reg: buck_vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-always-on; + }; + + mt6358_vpa_reg: buck_vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3650000>; + regulator-ramp-delay = <50000>; + regulator-enable-ramp-delay = <250>; + }; + + mt6358_vproc11_reg: buck_vproc11 { + regulator-name = "vproc11"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-always-on; + }; + + mt6358_vproc12_reg: buck_vproc12 { + regulator-name = "vproc12"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-always-on; + }; + + mt6358_vgpu_reg: buck_vgpu { + regulator-name = "vgpu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + }; + + mt6358_vs2_reg: buck_vs2 { + regulator-name = "vs2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2087500>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + mt6358_vmodem_reg: buck_vmodem { + regulator-name = "vmodem"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <900>; + regulator-always-on; + }; + + mt6358_vs1_reg: buck_vs1 { + regulator-name = "vs1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2587500>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + mt6358_vdram2_reg: ldo_vdram2 { + regulator-name = "vdram2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <3300>; + }; + + mt6358_vsim1_reg: ldo_vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <540>; + }; + + mt6358_vibr_reg: ldo_vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6358_vrf12_reg: ldo_vrf12 { + compatible = "regulator-fixed"; + regulator-name = "vrf12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <120>; + }; + + mt6358_vio18_reg: ldo_vio18 { + compatible = "regulator-fixed"; + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <2700>; + regulator-always-on; + }; + + mt6358_vusb_reg: ldo_vusb { + regulator-name = "vusb"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <270>; + regulator-always-on; + }; + + mt6358_vcamio_reg: ldo_vcamio { + compatible = "regulator-fixed"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vcamd_reg: ldo_vcamd { + regulator-name = "vcamd"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vcn18_reg: ldo_vcn18 { + compatible = "regulator-fixed"; + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vfe28_reg: ldo_vfe28 { + compatible = "regulator-fixed"; + regulator-name = "vfe28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vsram_proc11_reg: ldo_vsram_proc11 { + regulator-name = "vsram_proc11"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6358_vcn28_reg: ldo_vcn28 { + compatible = "regulator-fixed"; + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vsram_others_reg: ldo_vsram_others { + regulator-name = "vsram_others"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6358_vsram_gpu_reg: ldo_vsram_gpu { + regulator-name = "vsram_gpu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + }; + + mt6358_vxo22_reg: ldo_vxo22 { + compatible = "regulator-fixed"; + regulator-name = "vxo22"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <120>; + regulator-always-on; + }; + + mt6358_vefuse_reg: ldo_vefuse { + regulator-name = "vefuse"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vaux18_reg: ldo_vaux18 { + compatible = "regulator-fixed"; + regulator-name = "vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vmch_reg: ldo_vmch { + regulator-name = "vmch"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6358_vbif28_reg: ldo_vbif28 { + compatible = "regulator-fixed"; + regulator-name = "vbif28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vsram_proc12_reg: ldo_vsram_proc12 { + regulator-name = "vsram_proc12"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6358_vcama1_reg: ldo_vcama1 { + regulator-name = "vcama1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vemc_reg: ldo_vemc { + regulator-name = "vemc"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <60>; + regulator-always-on; + }; + + mt6358_vio28_reg: ldo_vio28 { + compatible = "regulator-fixed"; + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_va12_reg: ldo_va12 { + compatible = "regulator-fixed"; + regulator-name = "va12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <270>; + regulator-always-on; + }; + + mt6358_vrf18_reg: ldo_vrf18 { + compatible = "regulator-fixed"; + regulator-name = "vrf18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <120>; + }; + + mt6358_vcn33_bt_reg: ldo_vcn33_bt { + regulator-name = "vcn33_bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vcn33_wifi_reg: ldo_vcn33_wifi { + regulator-name = "vcn33_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vcama2_reg: ldo_vcama2 { + regulator-name = "vcama2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vmc_reg: ldo_vmc { + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6358_vldo28_reg: ldo_vldo28 { + regulator-name = "vldo28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vaud28_reg: ldo_vaud28 { + compatible = "regulator-fixed"; + regulator-name = "vaud28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vsim2_reg: ldo_vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <540>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt index 14d2eee96b3d..bab9f71140b8 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt @@ -22,9 +22,12 @@ RPMh resource. The names used for regulator nodes must match those supported by a given PMIC. Supported regulator node names: + PM8005: smps1 - smps4 + PM8009: smps1 - smps2, ldo1 - ldo7 + PM8150: smps1 - smps10, ldo1 - ldo18 + PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 PMI8998: bob - PM8005: smps1 - smps4 ======================== First Level Nodes - PMIC @@ -33,9 +36,13 @@ First Level Nodes - PMIC - compatible Usage: required Value type: <string> - Definition: Must be one of: "qcom,pm8998-rpmh-regulators", - "qcom,pmi8998-rpmh-regulators" or - "qcom,pm8005-rpmh-regulators". + Definition: Must be one of below: + "qcom,pm8005-rpmh-regulators" + "qcom,pm8009-rpmh-regulators" + "qcom,pm8150-rpmh-regulators" + "qcom,pm8150l-rpmh-regulators" + "qcom,pm8998-rpmh-regulators" + "qcom,pmi8998-rpmh-regulators" - qcom,pmic-id Usage: required diff --git a/Documentation/devicetree/bindings/regulator/sy8824x.txt b/Documentation/devicetree/bindings/regulator/sy8824x.txt new file mode 100644 index 000000000000..c5e95850c427 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/sy8824x.txt @@ -0,0 +1,24 @@ +SY8824C/SY8824E/SY20276 Voltage regulator + +Required properties: +- compatible: Must be one of the following. + "silergy,sy8824c" + "silergy,sy8824e" + "silergy,sy20276" + "silergy,sy20278" +- reg: I2C slave address + +Any property defined as part of the core regulator binding, defined in +./regulator.txt, can also be used. + +Example: + + vcore: regulator@00 { + compatible = "silergy,sy8824c"; + reg = <0x66>; + regulator-name = "vcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt index 74a91c4f8530..549f80436deb 100644 --- a/Documentation/devicetree/bindings/regulator/twl-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/twl-regulator.txt @@ -71,3 +71,10 @@ Example: regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; }; + +For twl6030 regulators/LDOs: + + - ti,retain-on-reset: Does not turn off the supplies during warm + reset. Could be needed for VMMC, as TWL6030 + reset sequence for this signal does not comply + with the SD specification. diff --git a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt index c9919f4b92d2..94fd38b0d163 100644 --- a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt @@ -13,6 +13,7 @@ this layer. These clocks and resets should be described in each property. Required properties: - compatible: Should be "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC + "socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC @@ -20,12 +21,12 @@ Required properties: - clocks: A list of phandles to the clock gate for USB3 glue layer. According to the clock-names, appropriate clocks are required. - clock-names: Should contain - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoCs "link" - for others - resets: A list of phandles to the reset control for USB3 glue layer. According to the reset-names, appropriate resets are required. - reset-names: Should contain - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoCs "link" - for others See Documentation/devicetree/bindings/regulator/regulator.txt diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt index 13e095182db4..c2489e41a801 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt @@ -8,6 +8,7 @@ Required properties: - compatible: - For i.MX7 SoCs should be "fsl,imx7d-src", "syscon" - For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon" + - For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon" - reg: should be register base and length as documented in the datasheet - interrupts: Should contain SRC interrupt @@ -46,5 +47,6 @@ Example: For list of all valid reset indices see -<dt-bindings/reset/imx7-reset.h> for i.MX7 and -<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ +<dt-bindings/reset/imx7-reset.h> for i.MX7, +<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and +<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM diff --git a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt new file mode 100644 index 000000000000..f94f911dd98d --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt @@ -0,0 +1,30 @@ +Synopsys DesignWare Reset controller +======================================= + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: + +- compatible: should be one of the following. + "snps,dw-high-reset" - for active high configuration + "snps,dw-low-reset" - for active low configuration + +- reg: physical base address of the controller and length of memory mapped + region. + +- #reset-cells: must be 1. + +example: + + dw_rst_1: reset-controller@0000 { + compatible = "snps,dw-high-reset"; + reg = <0x0000 0x4>; + #reset-cells = <1>; + }; + + dw_rst_2: reset-controller@1000 {i + compatible = "snps,dw-low-reset"; + reg = <0x1000 0x8>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index 21483ba820bc..3495eee81d53 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -13,7 +13,10 @@ Required properties: - reg : Address and length of the register set for the device - interrupts : Should contain uart interrupt - clocks : phandle + clock specifier pairs, one for each entry in clock-names -- clock-names : should contain: "ipg" - the uart clock +- clock-names : For vf610/ls1021a/imx7ulp, "ipg" clock is for uart bus/baud + clock. For imx8qxp lpuart, "ipg" clock is bus clock that is used to access + lpuart controller registers, it also requires "baud" clock for module to + receive/transmit data. Optional properties: - dmas: A list of two dma specifiers, one for each entry in dma-names. diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 6fdffb735fb9..3a3b57079f0d 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -9,6 +9,7 @@ Required properties: * "mediatek,mt6589-uart" for MT6589 compatible UARTS * "mediatek,mt6755-uart" for MT6755 compatible UARTS * "mediatek,mt6765-uart" for MT6765 compatible UARTS + * "mediatek,mt6779-uart" for MT6779 compatible UARTS * "mediatek,mt6795-uart" for MT6795 compatible UARTS * "mediatek,mt6797-uart" for MT6797 compatible UARTS * "mediatek,mt7622-uart" for MT7622 compatible UARTS diff --git a/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt b/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt index 6bf6b43f8dd8..3dd563cec794 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt +++ b/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt @@ -11,6 +11,7 @@ Required properties: "amlogic,meson8b-clk-measure" for Meson8b SoCs "amlogic,meson-axg-clk-measure" for AXG SoCs "amlogic,meson-g12a-clk-measure" for G12a SoCs + "amlogic,meson-sm1-clk-measure" for SM1 SoCs - reg: base address and size of the Clock Measurer register space. Example: diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt index d7afaff5faff..05ec2a838c54 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt @@ -18,7 +18,8 @@ Required properties: - reg : offset and length of the device registers. - bus-frequency : the clock frequency for QUICC Engine. - fsl,qe-num-riscs: define how many RISC engines the QE has. -- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the +- fsl,qe-snums: This property has to be specified as '/bits/ 8' value, + defining the array of serial number (SNUM) values for the virtual threads. Optional properties: @@ -34,6 +35,11 @@ Recommended properties - brg-frequency : the internal clock source frequency for baud-rate generators in Hz. +Deprecated properties +- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use + for the threads. Use fsl,qe-snums instead to not only specify the + number of snums, but also their values. + Example: qe@e0100000 { #address-cells = <1>; @@ -44,6 +50,11 @@ Example: reg = <e0100000 480>; brg-frequency = <0>; bus-frequency = <179A7B00>; + fsl,qe-snums = /bits/ 8 < + 0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D + 0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89 + 0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9 + 0xD8 0xD9 0xE8 0xE9>; } * Multi-User RAM (MURAM) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt index 954ffee0a9c4..4fc571e78f01 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt @@ -15,7 +15,10 @@ power-domains. - compatible: Usage: required Value type: <string> - Definition: must be "qcom,sdm845-aoss-qmp" + Definition: must be one of: + "qcom,sc7180-aoss-qmp" + "qcom,sdm845-aoss-qmp" + "qcom,sm8150-aoss-qmp" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt index f7b00a7c0f68..f541d1f776a2 100644 --- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt @@ -19,8 +19,15 @@ child of the pmmc node. Required Properties: -------------------- - compatible: should be "ti,sci-pm-domain" -- #power-domain-cells: Must be 1 so that an id can be provided in each - device node. +- #power-domain-cells: Can be one of the following: + 1: Containing the device id of each node + 2: First entry should be device id + Second entry should be one of the floowing: + TI_SCI_PD_EXCLUSIVE: To allow device to be + exclusively controlled by + the requesting hosts. + TI_SCI_PD_SHARED: To allow device to be shared + by multiple hosts. Example (K2G): ------------- diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt new file mode 100644 index 000000000000..a388005842ad --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt @@ -0,0 +1,47 @@ +* Nuvoton FLASH Interface Unit (FIU) SPI Controller + +NPCM FIU supports single, dual and quad communication interface. + +The NPCM7XX supports three FIU modules, +FIU0 and FIUx supports two chip selects, +FIU3 support four chip select. + +Required properties: + - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC + - #address-cells : should be 1. + - #size-cells : should be 0. + - reg : the first contains the register location and length, + the second contains the memory mapping address and length + - reg-names: Should contain the reg names "control" and "memory" + - clocks : phandle of FIU reference clock. + +Required properties in case the pins can be muxed: + - pinctrl-names : a pinctrl state named "default" must be defined. + - pinctrl-0 : phandle referencing pin configuration of the device. + +Optional property: + - nuvoton,spix-mode: enable spix-mode for an expansion bus to an ASIC or CPLD. + +Aliases: +- All the FIU controller nodes should be represented in the aliases node using + the following format 'fiu{n}' where n is a unique number for the alias. + In the NPCM7XX BMC: + fiu0 represent fiu 0 controller + fiu1 represent fiu 3 controller + fiu2 represent fiu x controller + +Example: +fiu3: spi@c00000000 { + compatible = "nuvoton,npcm750-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>; + reg-names = "control", "memory"; + clocks = <&clk NPCM7XX_CLK_AHB>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + spi-nor@0 { + ... + }; +}; + diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index a02e2fe2bfb2..732339275848 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -31,7 +31,7 @@ properties: If that property is used, the number of chip selects will be increased automatically with max(cs-gpios, hardware chip selects). - So if, for example, the controller has 2 CS lines, and the + So if, for example, the controller has 4 CS lines, and the cs-gpios looks like this cs-gpios = <&gpio1 0 0>, <0>, <&gpio1 1 0>, <&gpio1 2 0>; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index dcc7eaada511..162e024b95a0 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -6,6 +6,7 @@ Required properties: or "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" "fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi" + "fsl,ls1088a-dspi" followed by "fsl,ls1021a-v1.0-dspi" - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt index e8f1d627d288..69dc5d57b1ef 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt @@ -3,9 +3,8 @@ Required properties: - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi", "fsl,imx7d-qspi", "fsl,imx6ul-qspi", - "fsl,ls1021a-qspi" + "fsl,ls1021a-qspi", "fsl,ls2080a-qspi" or - "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi", "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi" - reg : the first contains the register location and length, the second contains the memory mapping address and length @@ -34,7 +33,11 @@ qspi0: quadspi@40044000 { clock-names = "qspi_en", "qspi"; flash0: s25fl128s@0 { - .... + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; }; }; diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index c0f6c8ecfa2e..3a8079eb18c8 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -5,6 +5,7 @@ Required properties: - mediatek,mt2701-spi: for mt2701 platforms - mediatek,mt2712-spi: for mt2712 platforms - mediatek,mt6589-spi: for mt6589 platforms + - mediatek,mt6765-spi: for mt6765 platforms - mediatek,mt7622-spi: for mt7622 platforms - "mediatek,mt7629-spi", "mediatek,mt7622-spi": for mt7629 platforms - mediatek,mt8135-spi: for mt8135 platforms diff --git a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt index 8de589b376ce..2567c829e2dc 100644 --- a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt +++ b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt @@ -25,18 +25,23 @@ data by ADI software channels at the same time, or two parallel routine of setti ADI registers will make ADI controller registers chaos to lead incorrect results. Then we need one hardware spinlock to synchronize between the multiple subsystems. +The new version ADI controller supplies multiple master channels for different +subsystem accessing, that means no need to add hardware spinlock to synchronize, +thus change the hardware spinlock support to be optional to keep backward +compatibility. + Required properties: - compatible: Should be "sprd,sc9860-adi". - reg: Offset and length of ADI-SPI controller register space. -- hwlocks: Reference to a phandle of a hwlock provider node. -- hwlock-names: Reference to hwlock name strings defined in the same order - as the hwlocks, should be "adi". - #address-cells: Number of cells required to define a chip select address on the ADI-SPI bus. Should be set to 1. - #size-cells: Size of cells required to define a chip select address size on the ADI-SPI bus. Should be set to 0. Optional properties: +- hwlocks: Reference to a phandle of a hwlock provider node. +- hwlock-names: Reference to hwlock name strings defined in the same order + as the hwlocks, should be "adi". - sprd,hw-channels: This is an array of channel values up to 49 channels. The first value specifies the hardware channel id which is used to transfer data triggered by hardware automatically, and the second diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml new file mode 100644 index 000000000000..20adc1c8e9cc --- /dev/null +++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/allwinner,sun4i-a10-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Timer Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + enum: + - allwinner,sun4i-a10-timer + - allwinner,sun8i-a23-timer + - allwinner,sun8i-v3s-timer + - allwinner,suniv-f1c100s-timer + + reg: + maxItems: 1 + + interrupts: + description: + List of timers interrupts + + clocks: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + items: + const: allwinner,sun4i-a10-timer + + then: + properties: + interrupts: + minItems: 6 + maxItems: 6 + + - if: + properties: + compatible: + items: + const: allwinner,sun8i-a23-timer + + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + items: + const: allwinner,sun8i-v3s-timer + + then: + properties: + interrupts: + minItems: 3 + maxItems: 3 + + - if: + properties: + compatible: + items: + const: allwinner,suniv-f1c100s-timer + + then: + properties: + interrupts: + minItems: 3 + maxItems: 3 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + timer { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0x400>; + interrupts = <22>, + <23>, + <24>, + <25>, + <67>, + <68>; + clocks = <&osc>; + }; + +... diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt deleted file mode 100644 index 3da9d515c03a..000000000000 --- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt +++ /dev/null @@ -1,19 +0,0 @@ -Allwinner A1X SoCs Timer Controller - -Required properties: - -- compatible : should be one of the following: - "allwinner,sun4i-a10-timer" - "allwinner,suniv-f1c100s-timer" -- reg : Specifies base physical address and size of the registers. -- interrupts : The interrupt of the first timer -- clocks: phandle to the source clock (usually a 24 MHz fixed clock) - -Example: - -timer { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0x400>; - interrupts = <22>; - clocks = <&osc>; -}; diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt deleted file mode 100644 index 2c5c1be78360..000000000000 --- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt +++ /dev/null @@ -1,26 +0,0 @@ -Allwinner SoCs High Speed Timer Controller - -Required properties: - -- compatible : should be "allwinner,sun5i-a13-hstimer" or - "allwinner,sun7i-a20-hstimer" -- reg : Specifies base physical address and size of the registers. -- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i - one) -- clocks: phandle to the source clock (usually the AHB clock) - -Optional properties: -- resets: phandle to a reset controller asserting the timer - -Example: - -timer@1c60000 { - compatible = "allwinner,sun7i-a20-hstimer"; - reg = <0x01c60000 0x1000>; - interrupts = <0 51 1>, - <0 52 1>, - <0 53 1>, - <0 54 1>; - clocks = <&ahb1_gates 19>; - resets = <&ahb1rst 19>; -}; diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml new file mode 100644 index 000000000000..dfa0c41fd261 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/allwinner,sun5i-a13-hstimer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A13 High-Speed Timer Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + oneOf: + - const: allwinner,sun5i-a13-hstimer + - const: allwinner,sun7i-a20-hstimer + - items: + - const: allwinner,sun6i-a31-hstimer + - const: allwinner,sun7i-a20-hstimer + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + maxItems: 4 + items: + - description: Timer 0 Interrupt + - description: Timer 1 Interrupt + - description: Timer 2 Interrupt + - description: Timer 3 Interrupt + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +if: + properties: + compatible: + items: + const: allwinner,sun5i-a13-hstimer + +then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + +else: + properties: + interrupts: + minItems: 4 + maxItems: 4 + +additionalProperties: false + +examples: + - | + timer@1c60000 { + compatible = "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <0 51 1>, + <0 52 1>, + <0 53 1>, + <0 54 1>; + clocks = <&ahb1_gates 19>; + resets = <&ahb1rst 19>; + }; + +... diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt index c5220bcd852b..a444cfc5852a 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt @@ -12,16 +12,13 @@ datasheets. Required Properties: - compatible: must contain one or more of the following: - - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT - (CMT1) - - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT - (CMT1) - - "renesas,cmt-48" for all non-second generation 48-bit CMT - (CMT1 on sh73a0 and r8a7740) - This is a fallback for the above renesas,cmt-48-* entries. - - "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4. - "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4. + - "renesas,r8a7740-cmt0" for the 32-bit CMT0 device included in r8a7740. + - "renesas,r8a7740-cmt1" for the 48-bit CMT1 device included in r8a7740. + - "renesas,r8a7740-cmt2" for the 32-bit CMT2 device included in r8a7740. + - "renesas,r8a7740-cmt3" for the 32-bit CMT3 device included in r8a7740. + - "renesas,r8a7740-cmt4" for the 32-bit CMT4 device included in r8a7740. - "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743. - "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743. - "renesas,r8a7744-cmt0" for the 32-bit CMT0 device included in r8a7744. @@ -31,29 +28,38 @@ Required Properties: - "renesas,r8a77470-cmt0" for the 32-bit CMT0 device included in r8a77470. - "renesas,r8a77470-cmt1" for the 48-bit CMT1 device included in r8a77470. - "renesas,r8a774a1-cmt0" for the 32-bit CMT0 device included in r8a774a1. - - "renesas,r8a774a1-cmt1" for the 48-bit CMT1 device included in r8a774a1. + - "renesas,r8a774a1-cmt1" for the 48-bit CMT devices included in r8a774a1. - "renesas,r8a774c0-cmt0" for the 32-bit CMT0 device included in r8a774c0. - - "renesas,r8a774c0-cmt1" for the 48-bit CMT1 device included in r8a774c0. + - "renesas,r8a774c0-cmt1" for the 48-bit CMT devices included in r8a774c0. - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790. - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790. - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791. - "renesas,r8a7791-cmt1" for the 48-bit CMT1 device included in r8a7791. + - "renesas,r8a7792-cmt0" for the 32-bit CMT0 device included in r8a7792. + - "renesas,r8a7792-cmt1" for the 48-bit CMT1 device included in r8a7792. - "renesas,r8a7793-cmt0" for the 32-bit CMT0 device included in r8a7793. - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793. - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794. - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794. - "renesas,r8a7795-cmt0" for the 32-bit CMT0 device included in r8a7795. - - "renesas,r8a7795-cmt1" for the 48-bit CMT1 device included in r8a7795. + - "renesas,r8a7795-cmt1" for the 48-bit CMT devices included in r8a7795. - "renesas,r8a7796-cmt0" for the 32-bit CMT0 device included in r8a7796. - - "renesas,r8a7796-cmt1" for the 48-bit CMT1 device included in r8a7796. + - "renesas,r8a7796-cmt1" for the 48-bit CMT devices included in r8a7796. - "renesas,r8a77965-cmt0" for the 32-bit CMT0 device included in r8a77965. - - "renesas,r8a77965-cmt1" for the 48-bit CMT1 device included in r8a77965. + - "renesas,r8a77965-cmt1" for the 48-bit CMT devices included in r8a77965. - "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970. - - "renesas,r8a77970-cmt1" for the 48-bit CMT1 device included in r8a77970. + - "renesas,r8a77970-cmt1" for the 48-bit CMT devices included in r8a77970. - "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980. - - "renesas,r8a77980-cmt1" for the 48-bit CMT1 device included in r8a77980. + - "renesas,r8a77980-cmt1" for the 48-bit CMT devices included in r8a77980. - "renesas,r8a77990-cmt0" for the 32-bit CMT0 device included in r8a77990. - - "renesas,r8a77990-cmt1" for the 48-bit CMT1 device included in r8a77990. + - "renesas,r8a77990-cmt1" for the 48-bit CMT devices included in r8a77990. + - "renesas,r8a77995-cmt0" for the 32-bit CMT0 device included in r8a77995. + - "renesas,r8a77995-cmt1" for the 48-bit CMT devices included in r8a77995. + - "renesas,sh73a0-cmt0" for the 32-bit CMT0 device included in sh73a0. + - "renesas,sh73a0-cmt1" for the 48-bit CMT1 device included in sh73a0. + - "renesas,sh73a0-cmt2" for the 32-bit CMT2 device included in sh73a0. + - "renesas,sh73a0-cmt3" for the 32-bit CMT3 device included in sh73a0. + - "renesas,sh73a0-cmt4" for the 32-bit CMT4 device included in sh73a0. - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2 and RZ/G1. @@ -63,7 +69,7 @@ Required Properties: listed above. - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3 and RZ/G2. - - "renesas,rcar-gen3-cmt1" for 48-bit CMT1 devices included in R-Car Gen3 + - "renesas,rcar-gen3-cmt1" for 48-bit CMT devices included in R-Car Gen3 and RZ/G2. These are fallbacks for R-Car Gen3 and RZ/G2 entries listed above. diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 2e742d399e87..870ac52d2225 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -104,6 +104,8 @@ properties: - infineon,slb9645tt # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor - infineon,tlv493d-a1b6 + # Inspur Power System power supply unit version 1 + - inspur,ipsps1 # Intersil ISL29028 Ambient Light and Proximity Sensor - isil,isl29028 # Intersil ISL29030 Ambient Light and Proximity Sensor diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 6992bbbbffab..de4240e0aa82 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -27,6 +27,8 @@ patternProperties: description: Abilis Systems "^abracon,.*": description: Abracon Corporation + "^acme,.*": + description: Acme Systems srl "^actions,.*": description: Actions Semiconductor Co., Ltd. "^active-semi,.*": @@ -81,6 +83,8 @@ patternProperties: description: Analogix Semiconductor, Inc. "^andestech,.*": description: Andes Technology Corporation + "^anvo,.*": + description: Anvo-Systems Dresden GmbH "^apm,.*": description: Applied Micro Circuits Corporation (APM) "^aptina,.*": @@ -269,6 +273,8 @@ patternProperties: description: Emerging Display Technologies "^eeti,.*": description: eGalax_eMPIA Technology Inc + "^einfochips,.*": + description: Einfochips "^elan,.*": description: Elan Microelectronic Corp. "^elgin,.*": @@ -503,6 +509,8 @@ patternProperties: description: Lantiq Semiconductor "^lattice,.*": description: Lattice Semiconductor + "^leez,.*": + description: Leez "^lego,.*": description: LEGO Systems A/S "^lemaker,.*": @@ -529,6 +537,8 @@ patternProperties: description: Linear Technology Corporation "^logicpd,.*": description: Logic PD, Inc. + "^longcheer,.*": + description: Longcheer Technology (Shanghai) Co., Ltd. "^lsi,.*": description: LSI Corp. (LSI Logic) "^lwn,.*": @@ -549,6 +559,8 @@ patternProperties: description: mCube "^meas,.*": description: Measurement Specialties + "^mecer,.*": + description: Mustek Limited "^mediatek,.*": description: MediaTek Inc. "^megachips,.*": @@ -575,6 +587,8 @@ patternProperties: description: Micro Crystal AG "^micron,.*": description: Micron Technology Inc. + "^microsoft,.*": + description: Microsoft Corporation "^mikroe,.*": description: MikroElektronika d.o.o. "^miniand,.*": diff --git a/Documentation/devicetree/writing-schema.md b/Documentation/devicetree/writing-schema.md deleted file mode 100644 index dc032db36262..000000000000 --- a/Documentation/devicetree/writing-schema.md +++ /dev/null @@ -1,130 +0,0 @@ -# Writing DeviceTree Bindings in json-schema - -Devicetree bindings are written using json-schema vocabulary. Schema files are -written in a JSON compatible subset of YAML. YAML is used instead of JSON as it -considered more human readable and has some advantages such as allowing -comments (Prefixed with '#'). - -## Schema Contents - -Each schema doc is a structured json-schema which is defined by a set of -top-level properties. Generally, there is one binding defined per file. The -top-level json-schema properties used are: - -- __$id__ - A json-schema unique identifier string. The string must be a valid -URI typically containing the binding's filename and path. For DT schema, it must -begin with "http://devicetree.org/schemas/". The URL is used in constructing -references to other files specified in schema "$ref" properties. A $ref values -with a leading '/' will have the hostname prepended. A $ref value a relative -path or filename only will be prepended with the hostname and path components -of the current schema file's '$id' value. A URL is used even for local files, -but there may not actually be files present at those locations. - -- __$schema__ - Indicates the meta-schema the schema file adheres to. - -- __title__ - A one line description on the contents of the binding schema. - -- __maintainers__ - A DT specific property. Contains a list of email address(es) -for maintainers of this binding. - -- __description__ - Optional. A multi-line text block containing any detailed -information about this binding. It should contain things such as what the block -or device does, standards the device conforms to, and links to datasheets for -more information. - -- __select__ - Optional. A json-schema used to match nodes for applying the -schema. By default without 'select', nodes are matched against their possible -compatible string values or node name. Most bindings should not need select. - -- __allOf__ - Optional. A list of other schemas to include. This is used to -include other schemas the binding conforms to. This may be schemas for a -particular class of devices such as I2C or SPI controllers. - -- __properties__ - A set of sub-schema defining all the DT properties for the -binding. The exact schema syntax depends on whether properties are known, -common properties (e.g. 'interrupts') or are binding/vendor specific properties. - - A property can also define a child DT node with child properties defined -under it. - - For more details on properties sections, see 'Property Schema' section. - -- __patternProperties__ - Optional. Similar to 'properties', but names are regex. - -- __required__ - A list of DT properties from the 'properties' section that -must always be present. - -- __examples__ - Optional. A list of one or more DTS hunks implementing the -binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead. - -Unless noted otherwise, all properties are required. - -## Property Schema - -The 'properties' section of the schema contains all the DT properties for a -binding. Each property contains a set of constraints using json-schema -vocabulary for that property. The properties schemas are what is used for -validation of DT files. - -For common properties, only additional constraints not covered by the common -binding schema need to be defined such as how many values are valid or what -possible values are valid. - -Vendor specific properties will typically need more detailed schema. With the -exception of boolean properties, they should have a reference to a type in -schemas/types.yaml. A "description" property is always required. - -The Devicetree schemas don't exactly match the YAML encoded DT data produced by -dtc. They are simplified to make them more compact and avoid a bunch of -boilerplate. The tools process the schema files to produce the final schema for -validation. There are currently 2 transformations the tools perform. - -The default for arrays in json-schema is they are variable sized and allow more -entries than explicitly defined. This can be restricted by defining 'minItems', -'maxItems', and 'additionalItems'. However, for DeviceTree Schemas, a fixed -size is desired in most cases, so these properties are added based on the -number of entries in an 'items' list. - -The YAML Devicetree format also makes all string values an array and scalar -values a matrix (in order to define groupings) even when only a single value -is present. Single entries in schemas are fixed up to match this encoding. - -## Testing - -### Dependencies - -The DT schema project must be installed in order to validate the DT schema -binding documents and validate DTS files using the DT schema. The DT schema -project can be installed with pip: - -`pip3 install git+https://github.com/devicetree-org/dt-schema.git@master` - -dtc must also be built with YAML output support enabled. This requires that -libyaml and its headers be installed on the host system. - -### Running checks - -The DT schema binding documents must be validated using the meta-schema (the -schema for the schema) to ensure they are both valid json-schema and valid -binding schema. All of the DT binding documents can be validated using the -`dt_binding_check` target: - -`make dt_binding_check` - -In order to perform validation of DT source files, use the `dtbs_check` target: - -`make dtbs_check` - -This will first run the `dt_binding_check` which generates the processed schema. - -It is also possible to run checks with a single schema file by setting the -'DT_SCHEMA_FILES' variable to a specific schema file. - -`make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml` - - -## json-schema Resources - -[JSON-Schema Specifications](http://json-schema.org/) - -[Using JSON Schema Book](http://usingjsonschema.com/) diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst new file mode 100644 index 000000000000..8f71d1e2ac52 --- /dev/null +++ b/Documentation/devicetree/writing-schema.rst @@ -0,0 +1,153 @@ +:orphan: + +Writing DeviceTree Bindings in json-schema +========================================== + +Devicetree bindings are written using json-schema vocabulary. Schema files are +written in a JSON compatible subset of YAML. YAML is used instead of JSON as it +considered more human readable and has some advantages such as allowing +comments (Prefixed with '#'). + +Schema Contents +--------------- + +Each schema doc is a structured json-schema which is defined by a set of +top-level properties. Generally, there is one binding defined per file. The +top-level json-schema properties used are: + +$id + A json-schema unique identifier string. The string must be a valid + URI typically containing the binding's filename and path. For DT schema, it must + begin with "http://devicetree.org/schemas/". The URL is used in constructing + references to other files specified in schema "$ref" properties. A $ref values + with a leading '/' will have the hostname prepended. A $ref value a relative + path or filename only will be prepended with the hostname and path components + of the current schema file's '$id' value. A URL is used even for local files, + but there may not actually be files present at those locations. + +$schema + Indicates the meta-schema the schema file adheres to. + +title + A one line description on the contents of the binding schema. + +maintainers + A DT specific property. Contains a list of email address(es) + for maintainers of this binding. + +description + Optional. A multi-line text block containing any detailed + information about this binding. It should contain things such as what the block + or device does, standards the device conforms to, and links to datasheets for + more information. + +select + Optional. A json-schema used to match nodes for applying the + schema. By default without 'select', nodes are matched against their possible + compatible string values or node name. Most bindings should not need select. + + allOf + Optional. A list of other schemas to include. This is used to + include other schemas the binding conforms to. This may be schemas for a + particular class of devices such as I2C or SPI controllers. + + properties + A set of sub-schema defining all the DT properties for the + binding. The exact schema syntax depends on whether properties are known, + common properties (e.g. 'interrupts') or are binding/vendor specific properties. + +A property can also define a child DT node with child properties defined +under it. + +For more details on properties sections, see 'Property Schema' section. + +patternProperties + Optional. Similar to 'properties', but names are regex. + +required + A list of DT properties from the 'properties' section that + must always be present. + +examples + Optional. A list of one or more DTS hunks implementing the + binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead. + +Unless noted otherwise, all properties are required. + +Property Schema +--------------- + +The 'properties' section of the schema contains all the DT properties for a +binding. Each property contains a set of constraints using json-schema +vocabulary for that property. The properties schemas are what is used for +validation of DT files. + +For common properties, only additional constraints not covered by the common +binding schema need to be defined such as how many values are valid or what +possible values are valid. + +Vendor specific properties will typically need more detailed schema. With the +exception of boolean properties, they should have a reference to a type in +schemas/types.yaml. A "description" property is always required. + +The Devicetree schemas don't exactly match the YAML encoded DT data produced by +dtc. They are simplified to make them more compact and avoid a bunch of +boilerplate. The tools process the schema files to produce the final schema for +validation. There are currently 2 transformations the tools perform. + +The default for arrays in json-schema is they are variable sized and allow more +entries than explicitly defined. This can be restricted by defining 'minItems', +'maxItems', and 'additionalItems'. However, for DeviceTree Schemas, a fixed +size is desired in most cases, so these properties are added based on the +number of entries in an 'items' list. + +The YAML Devicetree format also makes all string values an array and scalar +values a matrix (in order to define groupings) even when only a single value +is present. Single entries in schemas are fixed up to match this encoding. + +Testing +------- + +Dependencies +~~~~~~~~~~~~ + +The DT schema project must be installed in order to validate the DT schema +binding documents and validate DTS files using the DT schema. The DT schema +project can be installed with pip:: + + pip3 install git+https://github.com/devicetree-org/dt-schema.git@master + +dtc must also be built with YAML output support enabled. This requires that +libyaml and its headers be installed on the host system. + +Running checks +~~~~~~~~~~~~~~ + +The DT schema binding documents must be validated using the meta-schema (the +schema for the schema) to ensure they are both valid json-schema and valid +binding schema. All of the DT binding documents can be validated using the +``dt_binding_check`` target:: + + make dt_binding_check + +In order to perform validation of DT source files, use the `dtbs_check` target:: + + make dtbs_check + +This will first run the `dt_binding_check` which generates the processed schema. + +It is also possible to run checks with a single schema file by setting the +``DT_SCHEMA_FILES`` variable to a specific schema file. + +:: + + make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml + + +json-schema Resources +--------------------- + + +`JSON-Schema Specifications <http://json-schema.org/>`_ + +`Using JSON Schema Book <http://usingjsonschema.com/>`_ |