summaryrefslogtreecommitdiff
path: root/Documentation/media/kapi/csi2.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/media/kapi/csi2.rst')
-rw-r--r--Documentation/media/kapi/csi2.rst17
1 files changed, 14 insertions, 3 deletions
diff --git a/Documentation/media/kapi/csi2.rst b/Documentation/media/kapi/csi2.rst
index a7e75e2eba85..030a5c41ec75 100644
--- a/Documentation/media/kapi/csi2.rst
+++ b/Documentation/media/kapi/csi2.rst
@@ -49,9 +49,13 @@ where
The transmitter drivers must, if possible, configure the CSI-2
transmitter to *LP-11 mode* whenever the transmitter is powered on but
-not active. Some transmitters do this automatically but some have to
-be explicitly programmed to do so, and some are unable to do so
-altogether due to hardware constraints.
+not active, and maintain *LP-11 mode* until stream on. Only at stream
+on should the transmitter activate the clock on the clock lane and
+transition to *HS mode*.
+
+Some transmitters do this automatically but some have to be explicitly
+programmed to do so, and some are unable to do so altogether due to
+hardware constraints.
Stopping the transmitter
^^^^^^^^^^^^^^^^^^^^^^^^
@@ -72,3 +76,10 @@ the transmitter up by using the
:c:type:`v4l2_subdev_core_ops`->s_power() callback. This may take
place either indirectly by using :c:func:`v4l2_pipeline_pm_use` or
directly.
+
+Formats
+-------
+
+The media bus pixel codes document parallel formats. Should the pixel data be
+transported over a serial bus, the media bus pixel code that describes a
+parallel format that transfers a sample on a single clock cycle is used.