summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/block/writeback_cache_control.txt22
-rw-r--r--Documentation/device-mapper/log-writes.txt10
2 files changed, 16 insertions, 16 deletions
diff --git a/Documentation/block/writeback_cache_control.txt b/Documentation/block/writeback_cache_control.txt
index da70bdacd503..8a6bdada5f6b 100644
--- a/Documentation/block/writeback_cache_control.txt
+++ b/Documentation/block/writeback_cache_control.txt
@@ -20,11 +20,11 @@ a forced cache flush, and the Force Unit Access (FUA) flag for requests.
Explicit cache flushes
----------------------
-The REQ_FLUSH flag can be OR ed into the r/w flags of a bio submitted from
+The REQ_PREFLUSH flag can be OR ed into the r/w flags of a bio submitted from
the filesystem and will make sure the volatile cache of the storage device
has been flushed before the actual I/O operation is started. This explicitly
guarantees that previously completed write requests are on non-volatile
-storage before the flagged bio starts. In addition the REQ_FLUSH flag can be
+storage before the flagged bio starts. In addition the REQ_PREFLUSH flag can be
set on an otherwise empty bio structure, which causes only an explicit cache
flush without any dependent I/O. It is recommend to use
the blkdev_issue_flush() helper for a pure cache flush.
@@ -41,21 +41,21 @@ signaled after the data has been committed to non-volatile storage.
Implementation details for filesystems
--------------------------------------
-Filesystems can simply set the REQ_FLUSH and REQ_FUA bits and do not have to
+Filesystems can simply set the REQ_PREFLUSH and REQ_FUA bits and do not have to
worry if the underlying devices need any explicit cache flushing and how
-the Forced Unit Access is implemented. The REQ_FLUSH and REQ_FUA flags
+the Forced Unit Access is implemented. The REQ_PREFLUSH and REQ_FUA flags
may both be set on a single bio.
Implementation details for make_request_fn based block drivers
--------------------------------------------------------------
-These drivers will always see the REQ_FLUSH and REQ_FUA bits as they sit
+These drivers will always see the REQ_PREFLUSH and REQ_FUA bits as they sit
directly below the submit_bio interface. For remapping drivers the REQ_FUA
bits need to be propagated to underlying devices, and a global flush needs
-to be implemented for bios with the REQ_FLUSH bit set. For real device
-drivers that do not have a volatile cache the REQ_FLUSH and REQ_FUA bits
-on non-empty bios can simply be ignored, and REQ_FLUSH requests without
+to be implemented for bios with the REQ_PREFLUSH bit set. For real device
+drivers that do not have a volatile cache the REQ_PREFLUSH and REQ_FUA bits
+on non-empty bios can simply be ignored, and REQ_PREFLUSH requests without
data can be completed successfully without doing any work. Drivers for
devices with volatile caches need to implement the support for these
flags themselves without any help from the block layer.
@@ -65,8 +65,8 @@ Implementation details for request_fn based block drivers
--------------------------------------------------------------
For devices that do not support volatile write caches there is no driver
-support required, the block layer completes empty REQ_FLUSH requests before
-entering the driver and strips off the REQ_FLUSH and REQ_FUA bits from
+support required, the block layer completes empty REQ_PREFLUSH requests before
+entering the driver and strips off the REQ_PREFLUSH and REQ_FUA bits from
requests that have a payload. For devices with volatile write caches the
driver needs to tell the block layer that it supports flushing caches by
doing:
@@ -74,7 +74,7 @@ doing:
blk_queue_write_cache(sdkp->disk->queue, true, false);
and handle empty REQ_OP_FLUSH requests in its prep_fn/request_fn. Note that
-REQ_FLUSH requests with a payload are automatically turned into a sequence
+REQ_PREFLUSH requests with a payload are automatically turned into a sequence
of an empty REQ_OP_FLUSH request followed by the actual write by the block
layer. For devices that also support the FUA bit the block layer needs
to be told to pass through the REQ_FUA bit using:
diff --git a/Documentation/device-mapper/log-writes.txt b/Documentation/device-mapper/log-writes.txt
index c10f30c9b534..f4ebcbaf50f3 100644
--- a/Documentation/device-mapper/log-writes.txt
+++ b/Documentation/device-mapper/log-writes.txt
@@ -14,14 +14,14 @@ Log Ordering
We log things in order of completion once we are sure the write is no longer in
cache. This means that normal WRITE requests are not actually logged until the
-next REQ_FLUSH request. This is to make it easier for userspace to replay the
-log in a way that correlates to what is on disk and not what is in cache, to
-make it easier to detect improper waiting/flushing.
+next REQ_PREFLUSH request. This is to make it easier for userspace to replay
+the log in a way that correlates to what is on disk and not what is in cache,
+to make it easier to detect improper waiting/flushing.
This works by attaching all WRITE requests to a list once the write completes.
-Once we see a REQ_FLUSH request we splice this list onto the request and once
+Once we see a REQ_PREFLUSH request we splice this list onto the request and once
the FLUSH request completes we log all of the WRITEs and then the FLUSH. Only
-completed WRITEs, at the time the REQ_FLUSH is issued, are added in order to
+completed WRITEs, at the time the REQ_PREFLUSH is issued, are added in order to
simulate the worst case scenario with regard to power failures. Consider the
following example (W means write, C means complete):