summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/armada-38x.dtsi3
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw551x.dtsi19
-rw-r--r--arch/arm/boot/dts/imx6qdl-icore.dtsi3
-rw-r--r--arch/arm/boot/dts/imx6sx-sabreauto.dts2
-rw-r--r--arch/arm/boot/dts/imx6sx-sdb.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts12
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi2
-rw-r--r--arch/arm/boot/dts/sun5i.dtsi2
-rw-r--r--arch/arm/boot/dts/sun7i-a20.dtsi2
-rw-r--r--arch/arm/include/asm/percpu.h2
-rw-r--r--arch/arm/kernel/hw_breakpoint.c27
11 files changed, 49 insertions, 27 deletions
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 3f4bb44d85f0..669da3a33d82 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -339,7 +339,8 @@
comphy: phy@18300 {
compatible = "marvell,armada-380-comphy";
- reg = <0x18300 0x100>;
+ reg-names = "comphy", "conf";
+ reg = <0x18300 0x100>, <0x18460 4>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index c23ba229fd05..8c33510c9519 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -105,19 +105,16 @@
sound-digital {
compatible = "simple-audio-card";
simple-audio-card,name = "tda1997x-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_codec>;
+ simple-audio-card,frame-master = <&sound_codec>;
- simple-audio-card,dai-link@0 {
- format = "i2s";
-
- cpu {
- sound-dai = <&ssi2>;
- };
+ sound_cpu: simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ };
- codec {
- bitclock-master;
- frame-master;
- sound-dai = <&hdmi_receiver>;
- };
+ sound_codec: simple-audio-card,codec {
+ sound-dai = <&hdmi_receiver>;
};
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 7814f1ef0804..fde56f98398d 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -384,7 +384,7 @@
pinctrl_usbotg: usbotggrp {
fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
@@ -396,6 +396,7 @@
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+ MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
>;
};
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 315044ccd65f..e4719566133c 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -99,7 +99,7 @@
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index f6972deb5e39..865528b134d8 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -213,7 +213,7 @@
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ethphy2>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 7f2ddb78da5f..4227da71cc62 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -105,6 +105,14 @@
linux,code = <SW_FRONT_PROXIMITY>;
linux,can-disable;
};
+
+ machine_cover {
+ label = "Machine Cover";
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_MACHINE_COVER>;
+ linux,can-disable;
+ };
};
isp1707: isp1707 {
@@ -814,10 +822,6 @@
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
- /* For debugging, it is often good idea to remove this GPIO.
- It means you can remove back cover (to reboot by removing
- battery) and still use the MMC card. */
- cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
};
/* most boards use vaux3, only some old versions use vmmc2 instead */
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 4c268b70b735..e0a9b371c248 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -198,7 +198,7 @@
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
- alloc-ranges = <0x4a000000 0x6000000>;
+ alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 6befa236ba99..fd31da8fd311 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -117,7 +117,7 @@
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
- alloc-ranges = <0x4a000000 0x6000000>;
+ alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 8aebefd6accf..1f8b45f07e58 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -180,7 +180,7 @@
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
- alloc-ranges = <0x4a000000 0x6000000>;
+ alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
index f44f448537f2..1a3eedbac4a2 100644
--- a/arch/arm/include/asm/percpu.h
+++ b/arch/arm/include/asm/percpu.h
@@ -5,6 +5,8 @@
#ifndef _ASM_ARM_PERCPU_H_
#define _ASM_ARM_PERCPU_H_
+#include <asm/thread_info.h>
+
/*
* Same as asm-generic/percpu.h, except that we store the per cpu offset
* in the TPIDRPRW. TPIDRPRW only exists on V6K and V7
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index b0c195e3a06d..5f95e4b911a0 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -680,6 +680,12 @@ static void disable_single_step(struct perf_event *bp)
arch_install_hw_breakpoint(bp);
}
+static int watchpoint_fault_on_uaccess(struct pt_regs *regs,
+ struct arch_hw_breakpoint *info)
+{
+ return !user_mode(regs) && info->ctrl.privilege == ARM_BREAKPOINT_USER;
+}
+
static void watchpoint_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
@@ -739,16 +745,27 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
}
pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
+
+ /*
+ * If we triggered a user watchpoint from a uaccess routine,
+ * then handle the stepping ourselves since userspace really
+ * can't help us with this.
+ */
+ if (watchpoint_fault_on_uaccess(regs, info))
+ goto step;
+
perf_bp_event(wp, regs);
/*
- * If no overflow handler is present, insert a temporary
- * mismatch breakpoint so we can single-step over the
- * watchpoint trigger.
+ * Defer stepping to the overflow handler if one is installed.
+ * Otherwise, insert a temporary mismatch breakpoint so that
+ * we can single-step over the watchpoint trigger.
*/
- if (is_default_overflow_handler(wp))
- enable_single_step(wp, instruction_pointer(regs));
+ if (!is_default_overflow_handler(wp))
+ goto unlock;
+step:
+ enable_single_step(wp, instruction_pointer(regs));
unlock:
rcu_read_unlock();
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-12 02:28:10 +0300