summaryrefslogtreecommitdiff
path: root/arch/m68knommu/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68knommu/Kconfig')
-rw-r--r--arch/m68knommu/Kconfig58
1 files changed, 47 insertions, 11 deletions
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 8b9dacaa0f6e..b5424cf948e6 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -3,6 +3,7 @@ config M68K
default y
select HAVE_IDE
select HAVE_GENERIC_HARDIRQS
+ select GENERIC_HARDIRQS_NO_DEPRECATED
config MMU
bool
@@ -78,6 +79,12 @@ config HAVE_CACHE_SPLIT
config HAVE_CACHE_CB
bool
+config HAVE_MBAR
+ bool
+
+config HAVE_IPSBAR
+ bool
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
@@ -111,12 +118,14 @@ config M68360
config M5206
bool "MCF5206"
select COLDFIRE_SW_A7
+ select HAVE_MBAR
help
Motorola ColdFire 5206 processor support.
config M5206e
bool "MCF5206e"
select COLDFIRE_SW_A7
+ select HAVE_MBAR
help
Motorola ColdFire 5206e processor support.
@@ -131,30 +140,35 @@ config M523x
bool "MCF523x"
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
+ select HAVE_IPSBAR
help
Freescale Coldfire 5230/1/2/4/5 processor support
config M5249
bool "MCF5249"
select COLDFIRE_SW_A7
+ select HAVE_MBAR
help
Motorola ColdFire 5249 processor support.
config M5271
bool "MCF5271"
select HAVE_CACHE_SPLIT
+ select HAVE_IPSBAR
help
Freescale (Motorola) ColdFire 5270/5271 processor support.
config M5272
bool "MCF5272"
select COLDFIRE_SW_A7
+ select HAVE_MBAR
help
Motorola ColdFire 5272 processor support.
config M5275
bool "MCF5275"
select HAVE_CACHE_SPLIT
+ select HAVE_IPSBAR
help
Freescale (Motorola) ColdFire 5274/5275 processor support.
@@ -162,6 +176,7 @@ config M528x
bool "MCF528x"
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
+ select HAVE_IPSBAR
help
Motorola ColdFire 5280/5282 processor support.
@@ -169,6 +184,7 @@ config M5307
bool "MCF5307"
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
+ select HAVE_MBAR
help
Motorola ColdFire 5307 processor support.
@@ -182,18 +198,21 @@ config M5407
bool "MCF5407"
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
+ select HAVE_MBAR
help
Motorola ColdFire 5407 processor support.
config M547x
bool "MCF547x"
select HAVE_CACHE_CB
+ select HAVE_MBAR
help
Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
config M548x
bool "MCF548x"
select HAVE_CACHE_CB
+ select HAVE_MBAR
help
Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
@@ -241,17 +260,6 @@ config CLOCK_FREQ
if it is fitted (there are some exceptions). This value will be
specific to the exact CPU that you are using.
-config CLOCK_DIV
- int "Set the core/bus clock divide ratio"
- default "1"
- depends on CLOCK_SET
- help
- On many SoC style CPUs the master CPU clock is also used to drive
- on-chip peripherals. The clock that is distributed to these
- peripherals is sometimes a fixed ratio of the master clock
- frequency. If so then set this to the divider ratio of the
- master clock to the peripheral clock. If not sure then select 1.
-
config OLDMASK
bool "Old mask 5307 (1H55J) silicon"
depends on M5307
@@ -500,6 +508,12 @@ config M5407C3
help
Support for the Motorola M5407C3 board.
+config FIREBEE
+ bool "FireBee board support"
+ depends on M547x
+ help
+ Support for the FireBee ColdFire 5475 based board.
+
config CLEOPATRA
bool "Feith CLEOPATRA board support"
depends on (M5307 || M5407)
@@ -649,6 +663,28 @@ config VECTORBASE
platforms this address is programmed into the VBR register, thus
actually setting the address to use.
+config MBAR
+ hex "Address of the MBAR (internal peripherals)"
+ default "0x10000000"
+ depends on HAVE_MBAR
+ help
+ Define the address of the internal system peripherals. This value
+ is set in the processors MBAR register. This is generally setup by
+ the boot loader, and will not be written by the kernel. By far most
+ ColdFire boards use the default 0x10000000 value, so if unsure then
+ use this.
+
+config IPSBAR
+ hex "Address of the IPSBAR (internal peripherals)"
+ default "0x40000000"
+ depends on HAVE_IPSBAR
+ help
+ Define the address of the internal system peripherals. This value
+ is set in the processors IPSBAR register. This is generally setup by
+ the boot loader, and will not be written by the kernel. By far most
+ ColdFire boards use the default 0x40000000 value, so if unsure then
+ use this.
+
config KERNELBASE
hex "Address of the base of kernel code"
default "0x400"