diff options
Diffstat (limited to 'arch/x86')
| -rw-r--r-- | arch/x86/boot/compressed/ident_map_64.c | 1 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/mem_encrypt.S | 20 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/misc.h | 2 | ||||
| -rw-r--r-- | arch/x86/hyperv/hv_apic.c | 14 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/x2apic_uv_x.c | 23 | ||||
| -rw-r--r-- | arch/x86/kernel/cpu/bugs.c | 51 | ||||
| -rw-r--r-- | arch/x86/kernel/head_64.S | 16 | ||||
| -rw-r--r-- | arch/x86/kernel/sev-es-shared.c | 26 | ||||
| -rw-r--r-- | arch/x86/kernel/sev-es.c | 20 | ||||
| -rw-r--r-- | arch/x86/kernel/sev_verify_cbit.S | 89 | ||||
| -rw-r--r-- | arch/x86/lib/memcpy_64.S | 4 | ||||
| -rw-r--r-- | arch/x86/lib/memmove_64.S | 4 | ||||
| -rw-r--r-- | arch/x86/lib/memset_64.S | 4 | ||||
| -rw-r--r-- | arch/x86/mm/mem_encrypt.c | 1 |
14 files changed, 230 insertions, 45 deletions
diff --git a/arch/x86/boot/compressed/ident_map_64.c b/arch/x86/boot/compressed/ident_map_64.c index a5e5db6ada3c..39b2eded7bc2 100644 --- a/arch/x86/boot/compressed/ident_map_64.c +++ b/arch/x86/boot/compressed/ident_map_64.c @@ -164,6 +164,7 @@ void initialize_identity_maps(void *rmode) add_identity_map(cmdline, cmdline + COMMAND_LINE_SIZE); /* Load the new page-table. */ + sev_verify_cbit(top_level_pgt); write_cr3(top_level_pgt); } diff --git a/arch/x86/boot/compressed/mem_encrypt.S b/arch/x86/boot/compressed/mem_encrypt.S index dd07e7b41b11..aa561795efd1 100644 --- a/arch/x86/boot/compressed/mem_encrypt.S +++ b/arch/x86/boot/compressed/mem_encrypt.S @@ -68,6 +68,9 @@ SYM_FUNC_START(get_sev_encryption_bit) SYM_FUNC_END(get_sev_encryption_bit) .code64 + +#include "../../kernel/sev_verify_cbit.S" + SYM_FUNC_START(set_sev_encryption_mask) #ifdef CONFIG_AMD_MEM_ENCRYPT push %rbp @@ -81,6 +84,19 @@ SYM_FUNC_START(set_sev_encryption_mask) bts %rax, sme_me_mask(%rip) /* Create the encryption mask */ + /* + * Read MSR_AMD64_SEV again and store it to sev_status. Can't do this in + * get_sev_encryption_bit() because this function is 32-bit code and + * shared between 64-bit and 32-bit boot path. + */ + movl $MSR_AMD64_SEV, %ecx /* Read the SEV MSR */ + rdmsr + + /* Store MSR value in sev_status */ + shlq $32, %rdx + orq %rdx, %rax + movq %rax, sev_status(%rip) + .Lno_sev_mask: movq %rbp, %rsp /* Restore original stack pointer */ @@ -96,5 +112,7 @@ SYM_FUNC_END(set_sev_encryption_mask) #ifdef CONFIG_AMD_MEM_ENCRYPT .balign 8 -SYM_DATA(sme_me_mask, .quad 0) +SYM_DATA(sme_me_mask, .quad 0) +SYM_DATA(sev_status, .quad 0) +SYM_DATA(sev_check_data, .quad 0) #endif diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h index 6d31f1b4c4d1..d9a631c5973c 100644 --- a/arch/x86/boot/compressed/misc.h +++ b/arch/x86/boot/compressed/misc.h @@ -159,4 +159,6 @@ void boot_page_fault(void); void boot_stage1_vc(void); void boot_stage2_vc(void); +unsigned long sev_verify_cbit(unsigned long cr3); + #endif /* BOOT_COMPRESSED_MISC_H */ diff --git a/arch/x86/hyperv/hv_apic.c b/arch/x86/hyperv/hv_apic.c index 40e0e322161d..284e73661a18 100644 --- a/arch/x86/hyperv/hv_apic.c +++ b/arch/x86/hyperv/hv_apic.c @@ -273,11 +273,15 @@ void __init hv_apic_init(void) pr_info("Hyper-V: Using enlightened APIC (%s mode)", x2apic_enabled() ? "x2apic" : "xapic"); /* - * With x2apic, architectural x2apic MSRs are equivalent to the - * respective synthetic MSRs, so there's no need to override - * the apic accessors. The only exception is - * hv_apic_eoi_write, because it benefits from lazy EOI when - * available, but it works for both xapic and x2apic modes. + * When in x2apic mode, don't use the Hyper-V specific APIC + * accessors since the field layout in the ICR register is + * different in x2apic mode. Furthermore, the architectural + * x2apic MSRs function just as well as the Hyper-V + * synthetic APIC MSRs, so there's no benefit in having + * separate Hyper-V accessors for x2apic mode. The only + * exception is hv_apic_eoi_write, because it benefits from + * lazy EOI when available, but the same accessor works for + * both xapic and x2apic because the field layout is the same. */ apic_set_eoi_write(hv_apic_eoi_write); if (!x2apic_enabled()) { diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 714233cee0b5..3115caa7d7d0 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -290,6 +290,9 @@ static void __init uv_stringify(int len, char *to, char *from) { /* Relies on 'to' being NULL chars so result will be NULL terminated */ strncpy(to, from, len-1); + + /* Trim trailing spaces */ + (void)strim(to); } /* Find UV arch type entry in UVsystab */ @@ -366,7 +369,7 @@ static int __init early_get_arch_type(void) return ret; } -static int __init uv_set_system_type(char *_oem_id) +static int __init uv_set_system_type(char *_oem_id, char *_oem_table_id) { /* Save OEM_ID passed from ACPI MADT */ uv_stringify(sizeof(oem_id), oem_id, _oem_id); @@ -386,13 +389,23 @@ static int __init uv_set_system_type(char *_oem_id) /* (Not hubless), not a UV */ return 0; + /* Is UV hubless system */ + uv_hubless_system = 0x01; + + /* UV5 Hubless */ + if (strncmp(uv_archtype, "NSGI5", 5) == 0) + uv_hubless_system |= 0x20; + /* UV4 Hubless: CH */ - if (strncmp(uv_archtype, "NSGI4", 5) == 0) - uv_hubless_system = 0x11; + else if (strncmp(uv_archtype, "NSGI4", 5) == 0) + uv_hubless_system |= 0x10; /* UV3 Hubless: UV300/MC990X w/o hub */ else - uv_hubless_system = 0x9; + uv_hubless_system |= 0x8; + + /* Copy APIC type */ + uv_stringify(sizeof(oem_table_id), oem_table_id, _oem_table_id); pr_info("UV: OEM IDs %s/%s, SystemType %d, HUBLESS ID %x\n", oem_id, oem_table_id, uv_system_type, uv_hubless_system); @@ -456,7 +469,7 @@ static int __init uv_acpi_madt_oem_check(char *_oem_id, char *_oem_table_id) uv_cpu_info->p_uv_hub_info = &uv_hub_info_node0; /* If not UV, return. */ - if (likely(uv_set_system_type(_oem_id) == 0)) + if (uv_set_system_type(_oem_id, _oem_table_id) == 0) return 0; /* Save and Decode OEM Table ID */ diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index d3f0db463f96..581fb7223ad0 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -1254,6 +1254,14 @@ static int ssb_prctl_set(struct task_struct *task, unsigned long ctrl) return 0; } +static bool is_spec_ib_user_controlled(void) +{ + return spectre_v2_user_ibpb == SPECTRE_V2_USER_PRCTL || + spectre_v2_user_ibpb == SPECTRE_V2_USER_SECCOMP || + spectre_v2_user_stibp == SPECTRE_V2_USER_PRCTL || + spectre_v2_user_stibp == SPECTRE_V2_USER_SECCOMP; +} + static int ib_prctl_set(struct task_struct *task, unsigned long ctrl) { switch (ctrl) { @@ -1261,16 +1269,26 @@ static int ib_prctl_set(struct task_struct *task, unsigned long ctrl) if (spectre_v2_user_ibpb == SPECTRE_V2_USER_NONE && spectre_v2_user_stibp == SPECTRE_V2_USER_NONE) return 0; + /* - * Indirect branch speculation is always disabled in strict - * mode. It can neither be enabled if it was force-disabled - * by a previous prctl call. + * With strict mode for both IBPB and STIBP, the instruction + * code paths avoid checking this task flag and instead, + * unconditionally run the instruction. However, STIBP and IBPB + * are independent and either can be set to conditionally + * enabled regardless of the mode of the other. + * + * If either is set to conditional, allow the task flag to be + * updated, unless it was force-disabled by a previous prctl + * call. Currently, this is possible on an AMD CPU which has the + * feature X86_FEATURE_AMD_STIBP_ALWAYS_ON. In this case, if the + * kernel is booted with 'spectre_v2_user=seccomp', then + * spectre_v2_user_ibpb == SPECTRE_V2_USER_SECCOMP and + * spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED. */ - if (spectre_v2_user_ibpb == SPECTRE_V2_USER_STRICT || - spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT || - spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED || + if (!is_spec_ib_user_controlled() || task_spec_ib_force_disable(task)) return -EPERM; + task_clear_spec_ib_disable(task); task_update_spec_tif(task); break; @@ -1283,10 +1301,10 @@ static int ib_prctl_set(struct task_struct *task, unsigned long ctrl) if (spectre_v2_user_ibpb == SPECTRE_V2_USER_NONE && spectre_v2_user_stibp == SPECTRE_V2_USER_NONE) return -EPERM; - if (spectre_v2_user_ibpb == SPECTRE_V2_USER_STRICT || - spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT || - spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED) + + if (!is_spec_ib_user_controlled()) return 0; + task_set_spec_ib_disable(task); if (ctrl == PR_SPEC_FORCE_DISABLE) task_set_spec_ib_force_disable(task); @@ -1351,20 +1369,17 @@ static int ib_prctl_get(struct task_struct *task) if (spectre_v2_user_ibpb == SPECTRE_V2_USER_NONE && spectre_v2_user_stibp == SPECTRE_V2_USER_NONE) return PR_SPEC_ENABLE; - else if (spectre_v2_user_ibpb == SPECTRE_V2_USER_STRICT || - spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT || - spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED) - return PR_SPEC_DISABLE; - else if (spectre_v2_user_ibpb == SPECTRE_V2_USER_PRCTL || - spectre_v2_user_ibpb == SPECTRE_V2_USER_SECCOMP || - spectre_v2_user_stibp == SPECTRE_V2_USER_PRCTL || - spectre_v2_user_stibp == SPECTRE_V2_USER_SECCOMP) { + else if (is_spec_ib_user_controlled()) { if (task_spec_ib_force_disable(task)) return PR_SPEC_PRCTL | PR_SPEC_FORCE_DISABLE; if (task_spec_ib_disable(task)) return PR_SPEC_PRCTL | PR_SPEC_DISABLE; return PR_SPEC_PRCTL | PR_SPEC_ENABLE; - } else + } else if (spectre_v2_user_ibpb == SPECTRE_V2_USER_STRICT || + spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT || + spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED) + return PR_SPEC_DISABLE; + else return PR_SPEC_NOT_AFFECTED; } diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 7eb2a1c87969..3c417734790f 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -161,6 +161,21 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) /* Setup early boot stage 4-/5-level pagetables. */ addq phys_base(%rip), %rax + + /* + * For SEV guests: Verify that the C-bit is correct. A malicious + * hypervisor could lie about the C-bit position to perform a ROP + * attack on the guest by writing to the unencrypted stack and wait for + * the next RET instruction. + * %rsi carries pointer to realmode data and is callee-clobbered. Save + * and restore it. + */ + pushq %rsi + movq %rax, %rdi + call sev_verify_cbit + popq %rsi + + /* Switch to new page-table */ movq %rax, %cr3 /* Ensure I am executing from virtual addresses */ @@ -279,6 +294,7 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) SYM_CODE_END(secondary_startup_64) #include "verify_cpu.S" +#include "sev_verify_cbit.S" #ifdef CONFIG_HOTPLUG_CPU /* diff --git a/arch/x86/kernel/sev-es-shared.c b/arch/x86/kernel/sev-es-shared.c index 5f83ccaab877..7d04b356d44d 100644 --- a/arch/x86/kernel/sev-es-shared.c +++ b/arch/x86/kernel/sev-es-shared.c @@ -178,6 +178,32 @@ void __init do_vc_no_ghcb(struct pt_regs *regs, unsigned long exit_code) goto fail; regs->dx = val >> 32; + /* + * This is a VC handler and the #VC is only raised when SEV-ES is + * active, which means SEV must be active too. Do sanity checks on the + * CPUID results to make sure the hypervisor does not trick the kernel + * into the no-sev path. This could map sensitive data unencrypted and + * make it accessible to the hypervisor. + * + * In particular, check for: + * - Hypervisor CPUID bit + * - Availability of CPUID leaf 0x8000001f + * - SEV CPUID bit. + * + * The hypervisor might still report the wrong C-bit position, but this + * can't be checked here. + */ + + if ((fn == 1 && !(regs->cx & BIT(31)))) + /* Hypervisor bit */ + goto fail; + else if (fn == 0x80000000 && (regs->ax < 0x8000001f)) + /* SEV leaf check */ + goto fail; + else if ((fn == 0x8000001f && !(regs->ax & BIT(1)))) + /* SEV bit */ + goto fail; + /* Skip over the CPUID two-byte opcode */ regs->ip += 2; diff --git a/arch/x86/kernel/sev-es.c b/arch/x86/kernel/sev-es.c index 4a96726fbaf8..0bd1a0fc587e 100644 --- a/arch/x86/kernel/sev-es.c +++ b/arch/x86/kernel/sev-es.c @@ -374,8 +374,8 @@ fault: return ES_EXCEPTION; } -static bool vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt, - unsigned long vaddr, phys_addr_t *paddr) +static enum es_result vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt, + unsigned long vaddr, phys_addr_t *paddr) { unsigned long va = (unsigned long)vaddr; unsigned int level; @@ -394,15 +394,19 @@ static bool vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt, if (user_mode(ctxt->regs)) ctxt->fi.error_code |= X86_PF_USER; - return false; + return ES_EXCEPTION; } + if (WARN_ON_ONCE(pte_val(*pte) & _PAGE_ENC)) + /* Emulated MMIO to/from encrypted memory not supported */ + return ES_UNSUPPORTED; + pa = (phys_addr_t)pte_pfn(*pte) << PAGE_SHIFT; pa |= va & ~page_level_mask(level); *paddr = pa; - return true; + return ES_OK; } /* Include code shared with pre-decompression boot stage */ @@ -731,6 +735,7 @@ static enum es_result vc_do_mmio(struct ghcb *ghcb, struct es_em_ctxt *ctxt, { u64 exit_code, exit_info_1, exit_info_2; unsigned long ghcb_pa = __pa(ghcb); + enum es_result res; phys_addr_t paddr; void __user *ref; @@ -740,11 +745,12 @@ static enum es_result vc_do_mmio(struct ghcb *ghcb, struct es_em_ctxt *ctxt, exit_code = read ? SVM_VMGEXIT_MMIO_READ : SVM_VMGEXIT_MMIO_WRITE; - if (!vc_slow_virt_to_phys(ghcb, ctxt, (unsigned long)ref, &paddr)) { - if (!read) + res = vc_slow_virt_to_phys(ghcb, ctxt, (unsigned long)ref, &paddr); + if (res != ES_OK) { + if (res == ES_EXCEPTION && !read) ctxt->fi.error_code |= X86_PF_WRITE; - return ES_EXCEPTION; + return res; } exit_info_1 = paddr; diff --git a/arch/x86/kernel/sev_verify_cbit.S b/arch/x86/kernel/sev_verify_cbit.S new file mode 100644 index 000000000000..ee04941a6546 --- /dev/null +++ b/arch/x86/kernel/sev_verify_cbit.S @@ -0,0 +1,89 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * sev_verify_cbit.S - Code for verification of the C-bit position reported + * by the Hypervisor when running with SEV enabled. + * + * Copyright (c) 2020 Joerg Roedel (jroedel@suse.de) + * + * sev_verify_cbit() is called before switching to a new long-mode page-table + * at boot. + * + * Verify that the C-bit position is correct by writing a random value to + * an encrypted memory location while on the current page-table. Then it + * switches to the new page-table to verify the memory content is still the + * same. After that it switches back to the current page-table and when the + * check succeeded it returns. If the check failed the code invalidates the + * stack pointer and goes into a hlt loop. The stack-pointer is invalidated to + * make sure no interrupt or exception can get the CPU out of the hlt loop. + * + * New page-table pointer is expected in %rdi (first parameter) + * + */ +SYM_FUNC_START(sev_verify_cbit) +#ifdef CONFIG_AMD_MEM_ENCRYPT + /* First check if a C-bit was detected */ + movq sme_me_mask(%rip), %rsi + testq %rsi, %rsi + jz 3f + + /* sme_me_mask != 0 could mean SME or SEV - Check also for SEV */ + movq sev_status(%rip), %rsi + testq %rsi, %rsi + jz 3f + + /* Save CR4 in %rsi */ + movq %cr4, %rsi + + /* Disable Global Pages */ + movq %rsi, %rdx + andq $(~X86_CR4_PGE), %rdx + movq %rdx, %cr4 + + /* + * Verified that running under SEV - now get a random value using + * RDRAND. This instruction is mandatory when running as an SEV guest. + * + * Don't bail out of the loop if RDRAND returns errors. It is better to + * prevent forward progress than to work with a non-random value here. + */ +1: rdrand %rdx + jnc 1b + + /* Store value to memory and keep it in %rdx */ + movq %rdx, sev_check_data(%rip) + + /* Backup current %cr3 value to restore it later */ + movq %cr3, %rcx + + /* Switch to new %cr3 - This might unmap the stack */ + movq %rdi, %cr3 + + /* + * Compare value in %rdx with memory location. If C-bit is incorrect + * this would read the encrypted data and make the check fail. + */ + cmpq %rdx, sev_check_data(%rip) + + /* Restore old %cr3 */ + movq %rcx, %cr3 + + /* Restore previous CR4 */ + movq %rsi, %cr4 + + /* Check CMPQ result */ + je 3f + + /* + * The check failed, prevent any forward progress to prevent ROP + * attacks, invalidate the stack and go into a hlt loop. + */ + xorq %rsp, %rsp + subq $0x1000, %rsp +2: hlt + jmp 2b +3: +#endif + /* Return page-table pointer */ + movq %rdi, %rax + ret +SYM_FUNC_END(sev_verify_cbit) diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S index 037faac46b0c..1e299ac73c86 100644 --- a/arch/x86/lib/memcpy_64.S +++ b/arch/x86/lib/memcpy_64.S @@ -16,8 +16,6 @@ * to a jmp to memcpy_erms which does the REP; MOVSB mem copy. */ -.weak memcpy - /* * memcpy - Copy a memory block. * @@ -30,7 +28,7 @@ * rax original destination */ SYM_FUNC_START_ALIAS(__memcpy) -SYM_FUNC_START_LOCAL(memcpy) +SYM_FUNC_START_WEAK(memcpy) ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \ "jmp memcpy_erms", X86_FEATURE_ERMS diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S index 7ff00ea64e4f..41902fe8b859 100644 --- a/arch/x86/lib/memmove_64.S +++ b/arch/x86/lib/memmove_64.S @@ -24,9 +24,7 @@ * Output: * rax: dest */ -.weak memmove - -SYM_FUNC_START_ALIAS(memmove) +SYM_FUNC_START_WEAK(memmove) SYM_FUNC_START(__memmove) mov %rdi, %rax diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S index 9ff15ee404a4..0bfd26e4ca9e 100644 --- a/arch/x86/lib/memset_64.S +++ b/arch/x86/lib/memset_64.S @@ -6,8 +6,6 @@ #include <asm/alternative-asm.h> #include <asm/export.h> -.weak memset - /* * ISO C memset - set a memory block to a byte value. This function uses fast * string to get better performance than the original function. The code is @@ -19,7 +17,7 @@ * * rax original destination */ -SYM_FUNC_START_ALIAS(memset) +SYM_FUNC_START_WEAK(memset) SYM_FUNC_START(__memset) /* * Some CPUs support enhanced REP MOVSB/STOSB feature. It is recommended diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c index efbb3de472df..bc0833713be9 100644 --- a/arch/x86/mm/mem_encrypt.c +++ b/arch/x86/mm/mem_encrypt.c @@ -39,6 +39,7 @@ */ u64 sme_me_mask __section(".data") = 0; u64 sev_status __section(".data") = 0; +u64 sev_check_data __section(".data") = 0; EXPORT_SYMBOL(sme_me_mask); DEFINE_STATIC_KEY_FALSE(sev_enable_key); EXPORT_SYMBOL_GPL(sev_enable_key); |