summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_runtime_pm.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_runtime_pm.c')
-rw-r--r--drivers/gpu/drm/i915/intel_runtime_pm.c492
1 files changed, 426 insertions, 66 deletions
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 7401cf90b0db..d89c1d0aa1b7 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -464,14 +464,14 @@ static void assert_can_enable_dc5(struct drm_i915_private *dev_priv)
bool pg2_enabled = intel_display_power_well_is_enabled(dev_priv,
SKL_DISP_PW_2);
- WARN(!IS_SKYLAKE(dev), "Platform doesn't support DC5.\n");
- WARN(!HAS_RUNTIME_PM(dev), "Runtime PM not enabled.\n");
- WARN(pg2_enabled, "PG2 not disabled to enable DC5.\n");
+ WARN_ONCE(!IS_SKYLAKE(dev), "Platform doesn't support DC5.\n");
+ WARN_ONCE(!HAS_RUNTIME_PM(dev), "Runtime PM not enabled.\n");
+ WARN_ONCE(pg2_enabled, "PG2 not disabled to enable DC5.\n");
- WARN((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5),
- "DC5 already programmed to be enabled.\n");
- WARN(dev_priv->pm.suspended,
- "DC5 cannot be enabled, if platform is runtime-suspended.\n");
+ WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5),
+ "DC5 already programmed to be enabled.\n");
+ WARN_ONCE(dev_priv->pm.suspended,
+ "DC5 cannot be enabled, if platform is runtime-suspended.\n");
assert_csr_loaded(dev_priv);
}
@@ -487,8 +487,8 @@ static void assert_can_disable_dc5(struct drm_i915_private *dev_priv)
if (dev_priv->power_domains.initializing)
return;
- WARN(!pg2_enabled, "PG2 not enabled to disable DC5.\n");
- WARN(dev_priv->pm.suspended,
+ WARN_ONCE(!pg2_enabled, "PG2 not enabled to disable DC5.\n");
+ WARN_ONCE(dev_priv->pm.suspended,
"Disabling of DC5 while platform is runtime-suspended should never happen.\n");
}
@@ -527,12 +527,12 @@ static void assert_can_enable_dc6(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
- WARN(!IS_SKYLAKE(dev), "Platform doesn't support DC6.\n");
- WARN(!HAS_RUNTIME_PM(dev), "Runtime PM not enabled.\n");
- WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
- "Backlight is not disabled.\n");
- WARN((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6),
- "DC6 already programmed to be enabled.\n");
+ WARN_ONCE(!IS_SKYLAKE(dev), "Platform doesn't support DC6.\n");
+ WARN_ONCE(!HAS_RUNTIME_PM(dev), "Runtime PM not enabled.\n");
+ WARN_ONCE(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
+ "Backlight is not disabled.\n");
+ WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6),
+ "DC6 already programmed to be enabled.\n");
assert_csr_loaded(dev_priv);
}
@@ -547,8 +547,8 @@ static void assert_can_disable_dc6(struct drm_i915_private *dev_priv)
return;
assert_csr_loaded(dev_priv);
- WARN(!(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6),
- "DC6 already programmed to be disabled.\n");
+ WARN_ONCE(!(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6),
+ "DC6 already programmed to be disabled.\n");
}
static void skl_enable_dc6(struct drm_i915_private *dev_priv)
@@ -657,9 +657,15 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
}
} else {
if (enable_requested) {
- I915_WRITE(HSW_PWR_WELL_DRIVER, tmp & ~req_mask);
- POSTING_READ(HSW_PWR_WELL_DRIVER);
- DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
+ if (IS_SKYLAKE(dev) &&
+ (power_well->data == SKL_DISP_PW_1) &&
+ (intel_csr_load_status_get(dev_priv) == FW_LOADED))
+ DRM_DEBUG_KMS("Not Disabling PW1, dmc will handle\n");
+ else {
+ I915_WRITE(HSW_PWR_WELL_DRIVER, tmp & ~req_mask);
+ POSTING_READ(HSW_PWR_WELL_DRIVER);
+ DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
+ }
if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
power_well->data == SKL_DISP_PW_2) {
@@ -671,7 +677,7 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
wait_for((state = intel_csr_load_status_get(dev_priv)) !=
FW_UNINITIALIZED, 1000);
if (state != FW_LOADED)
- DRM_ERROR("CSR firmware not ready (%d)\n",
+ DRM_DEBUG("CSR firmware not ready (%d)\n",
state);
else
if (SKL_ENABLE_DC6(dev))
@@ -856,6 +862,25 @@ static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
{
+ enum pipe pipe;
+
+ /*
+ * Enable the CRI clock source so we can get at the
+ * display and the reference clock for VGA
+ * hotplug / manual detection. Supposedly DSI also
+ * needs the ref clock up and running.
+ *
+ * CHV DPLL B/C have some issues if VGA mode is enabled.
+ */
+ for_each_pipe(dev_priv->dev, pipe) {
+ u32 val = I915_READ(DPLL(pipe));
+
+ val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
+ if (pipe != PIPE_A)
+ val |= DPLL_INTEGRATED_CRI_CLK_VLV;
+
+ I915_WRITE(DPLL(pipe), val);
+ }
spin_lock_irq(&dev_priv->irq_lock);
valleyview_enable_display_irqs(dev_priv);
@@ -907,13 +932,7 @@ static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
{
WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
- /*
- * Enable the CRI clock source so we can get at the
- * display and the reference clock for VGA
- * hotplug / manual detection.
- */
- I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | DPLL_VGA_MODE_DIS |
- DPLL_REF_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+ /* since ref/cri clock was enabled */
udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
vlv_set_power_well(dev_priv, power_well, true);
@@ -948,30 +967,149 @@ static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
vlv_set_power_well(dev_priv, power_well, false);
}
+#define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1)
+
+static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv,
+ int power_well_id)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ struct i915_power_well *power_well;
+ int i;
+
+ for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
+ if (power_well->data == power_well_id)
+ return power_well;
+ }
+
+ return NULL;
+}
+
+#define BITS_SET(val, bits) (((val) & (bits)) == (bits))
+
+static void assert_chv_phy_status(struct drm_i915_private *dev_priv)
+{
+ struct i915_power_well *cmn_bc =
+ lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
+ struct i915_power_well *cmn_d =
+ lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_D);
+ u32 phy_control = dev_priv->chv_phy_control;
+ u32 phy_status = 0;
+ u32 phy_status_mask = 0xffffffff;
+ u32 tmp;
+
+ /*
+ * The BIOS can leave the PHY is some weird state
+ * where it doesn't fully power down some parts.
+ * Disable the asserts until the PHY has been fully
+ * reset (ie. the power well has been disabled at
+ * least once).
+ */
+ if (!dev_priv->chv_phy_assert[DPIO_PHY0])
+ phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0) |
+ PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0) |
+ PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1) |
+ PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1) |
+ PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0) |
+ PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1));
+
+ if (!dev_priv->chv_phy_assert[DPIO_PHY1])
+ phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0) |
+ PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0) |
+ PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1));
+
+ if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc)) {
+ phy_status |= PHY_POWERGOOD(DPIO_PHY0);
+
+ /* this assumes override is only used to enable lanes */
+ if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0)) == 0)
+ phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0);
+
+ if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1)) == 0)
+ phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1);
+
+ /* CL1 is on whenever anything is on in either channel */
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0) |
+ PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)))
+ phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0);
+
+ /*
+ * The DPLLB check accounts for the pipe B + port A usage
+ * with CL2 powered up but all the lanes in the second channel
+ * powered down.
+ */
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)) &&
+ (I915_READ(DPLL(PIPE_B)) & DPLL_VCO_ENABLE) == 0)
+ phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1);
+
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH0)))
+ phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0);
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH0)))
+ phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1);
+
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH1)))
+ phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0);
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH1)))
+ phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1);
+ }
+
+ if (cmn_d->ops->is_enabled(dev_priv, cmn_d)) {
+ phy_status |= PHY_POWERGOOD(DPIO_PHY1);
+
+ /* this assumes override is only used to enable lanes */
+ if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0)) == 0)
+ phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0);
+
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0)))
+ phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0);
+
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY1, DPIO_CH0)))
+ phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0);
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY1, DPIO_CH0)))
+ phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1);
+ }
+
+ phy_status &= phy_status_mask;
+
+ /*
+ * The PHY may be busy with some initial calibration and whatnot,
+ * so the power state can take a while to actually change.
+ */
+ if (wait_for((tmp = I915_READ(DISPLAY_PHY_STATUS) & phy_status_mask) == phy_status, 10))
+ WARN(phy_status != tmp,
+ "Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n",
+ tmp, phy_status, dev_priv->chv_phy_control);
+}
+
+#undef BITS_SET
+
static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
enum dpio_phy phy;
+ enum pipe pipe;
+ uint32_t tmp;
WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
- /*
- * Enable the CRI clock source so we can get at the
- * display and the reference clock for VGA
- * hotplug / manual detection.
- */
if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
+ pipe = PIPE_A;
phy = DPIO_PHY0;
- I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | DPLL_VGA_MODE_DIS |
- DPLL_REF_CLK_ENABLE_VLV);
- I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | DPLL_VGA_MODE_DIS |
- DPLL_REF_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
} else {
+ pipe = PIPE_C;
phy = DPIO_PHY1;
- I915_WRITE(DPLL(PIPE_C), I915_READ(DPLL(PIPE_C)) | DPLL_VGA_MODE_DIS |
- DPLL_REF_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
}
+
+ /* since ref/cri clock was enabled */
udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
vlv_set_power_well(dev_priv, power_well, true);
@@ -979,8 +1117,38 @@ static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1))
DRM_ERROR("Display PHY %d is not power up\n", phy);
+ mutex_lock(&dev_priv->sb_lock);
+
+ /* Enable dynamic power down */
+ tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW28);
+ tmp |= DPIO_DYNPWRDOWNEN_CH0 | DPIO_CL1POWERDOWNEN |
+ DPIO_SUS_CLK_CONFIG_GATE_CLKREQ;
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW28, tmp);
+
+ if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
+ tmp = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW6_CH1);
+ tmp |= DPIO_DYNPWRDOWNEN_CH1;
+ vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW6_CH1, tmp);
+ } else {
+ /*
+ * Force the non-existing CL2 off. BXT does this
+ * too, so maybe it saves some power even though
+ * CL2 doesn't exist?
+ */
+ tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30);
+ tmp |= DPIO_CL2_LDOFUSE_PWRENB;
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, tmp);
+ }
+
+ mutex_unlock(&dev_priv->sb_lock);
+
dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(phy);
I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
+
+ DRM_DEBUG_KMS("Enabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n",
+ phy, dev_priv->chv_phy_control);
+
+ assert_chv_phy_status(dev_priv);
}
static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
@@ -1004,6 +1172,137 @@ static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
vlv_set_power_well(dev_priv, power_well, false);
+
+ DRM_DEBUG_KMS("Disabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n",
+ phy, dev_priv->chv_phy_control);
+
+ /* PHY is fully reset now, so we can enable the PHY state asserts */
+ dev_priv->chv_phy_assert[phy] = true;
+
+ assert_chv_phy_status(dev_priv);
+}
+
+static void assert_chv_phy_powergate(struct drm_i915_private *dev_priv, enum dpio_phy phy,
+ enum dpio_channel ch, bool override, unsigned int mask)
+{
+ enum pipe pipe = phy == DPIO_PHY0 ? PIPE_A : PIPE_C;
+ u32 reg, val, expected, actual;
+
+ /*
+ * The BIOS can leave the PHY is some weird state
+ * where it doesn't fully power down some parts.
+ * Disable the asserts until the PHY has been fully
+ * reset (ie. the power well has been disabled at
+ * least once).
+ */
+ if (!dev_priv->chv_phy_assert[phy])
+ return;
+
+ if (ch == DPIO_CH0)
+ reg = _CHV_CMN_DW0_CH0;
+ else
+ reg = _CHV_CMN_DW6_CH1;
+
+ mutex_lock(&dev_priv->sb_lock);
+ val = vlv_dpio_read(dev_priv, pipe, reg);
+ mutex_unlock(&dev_priv->sb_lock);
+
+ /*
+ * This assumes !override is only used when the port is disabled.
+ * All lanes should power down even without the override when
+ * the port is disabled.
+ */
+ if (!override || mask == 0xf) {
+ expected = DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN;
+ /*
+ * If CH1 common lane is not active anymore
+ * (eg. for pipe B DPLL) the entire channel will
+ * shut down, which causes the common lane registers
+ * to read as 0. That means we can't actually check
+ * the lane power down status bits, but as the entire
+ * register reads as 0 it's a good indication that the
+ * channel is indeed entirely powered down.
+ */
+ if (ch == DPIO_CH1 && val == 0)
+ expected = 0;
+ } else if (mask != 0x0) {
+ expected = DPIO_ANYDL_POWERDOWN;
+ } else {
+ expected = 0;
+ }
+
+ if (ch == DPIO_CH0)
+ actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH0;
+ else
+ actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH1;
+ actual &= DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN;
+
+ WARN(actual != expected,
+ "Unexpected DPIO lane power down: all %d, any %d. Expected: all %d, any %d. (0x%x = 0x%08x)\n",
+ !!(actual & DPIO_ALLDL_POWERDOWN), !!(actual & DPIO_ANYDL_POWERDOWN),
+ !!(expected & DPIO_ALLDL_POWERDOWN), !!(expected & DPIO_ANYDL_POWERDOWN),
+ reg, val);
+}
+
+bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
+ enum dpio_channel ch, bool override)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ bool was_override;
+
+ mutex_lock(&power_domains->lock);
+
+ was_override = dev_priv->chv_phy_control & PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
+
+ if (override == was_override)
+ goto out;
+
+ if (override)
+ dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
+ else
+ dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
+
+ I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
+
+ DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d (DPIO_PHY_CONTROL=0x%08x)\n",
+ phy, ch, dev_priv->chv_phy_control);
+
+ assert_chv_phy_status(dev_priv);
+
+out:
+ mutex_unlock(&power_domains->lock);
+
+ return was_override;
+}
+
+void chv_phy_powergate_lanes(struct intel_encoder *encoder,
+ bool override, unsigned int mask)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ enum dpio_phy phy = vlv_dport_to_phy(enc_to_dig_port(&encoder->base));
+ enum dpio_channel ch = vlv_dport_to_channel(enc_to_dig_port(&encoder->base));
+
+ mutex_lock(&power_domains->lock);
+
+ dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD(0xf, phy, ch);
+ dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD(mask, phy, ch);
+
+ if (override)
+ dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
+ else
+ dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
+
+ I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
+
+ DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d lanes 0x%x (PHY_CONTROL=0x%08x)\n",
+ phy, ch, mask, dev_priv->chv_phy_control);
+
+ assert_chv_phy_status(dev_priv);
+
+ assert_chv_phy_powergate(dev_priv, phy, ch, override, mask);
+
+ mutex_unlock(&power_domains->lock);
}
static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv,
@@ -1167,8 +1466,6 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
intel_runtime_pm_put(dev_priv);
}
-#define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1)
-
#define HSW_ALWAYS_ON_POWER_DOMAINS ( \
BIT(POWER_DOMAIN_PIPE_A) | \
BIT(POWER_DOMAIN_TRANSCODER_EDP) | \
@@ -1430,21 +1727,6 @@ static struct i915_power_well chv_power_wells[] = {
},
};
-static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv,
- int power_well_id)
-{
- struct i915_power_domains *power_domains = &dev_priv->power_domains;
- struct i915_power_well *power_well;
- int i;
-
- for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
- if (power_well->data == power_well_id)
- return power_well;
- }
-
- return NULL;
-}
-
bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv,
int power_well_id)
{
@@ -1529,6 +1811,21 @@ static struct i915_power_well bxt_power_wells[] = {
}
};
+static int
+sanitize_disable_power_well_option(const struct drm_i915_private *dev_priv,
+ int disable_power_well)
+{
+ if (disable_power_well >= 0)
+ return !!disable_power_well;
+
+ if (IS_SKYLAKE(dev_priv)) {
+ DRM_DEBUG_KMS("Disabling display power well support\n");
+ return 0;
+ }
+
+ return 1;
+}
+
#define set_power_wells(power_domains, __power_wells) ({ \
(power_domains)->power_wells = (__power_wells); \
(power_domains)->power_well_count = ARRAY_SIZE(__power_wells); \
@@ -1545,6 +1842,9 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
{
struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ i915.disable_power_well = sanitize_disable_power_well_option(dev_priv,
+ i915.disable_power_well);
+
mutex_init(&power_domains->lock);
/*
@@ -1583,7 +1883,6 @@ static void intel_runtime_pm_disable(struct drm_i915_private *dev_priv)
/* Make sure we're not suspended first. */
pm_runtime_get_sync(device);
- pm_runtime_disable(device);
}
/**
@@ -1630,19 +1929,80 @@ static void chv_phy_control_init(struct drm_i915_private *dev_priv)
* DISPLAY_PHY_CONTROL can get corrupted if read. As a
* workaround never ever read DISPLAY_PHY_CONTROL, and
* instead maintain a shadow copy ourselves. Use the actual
- * power well state to reconstruct the expected initial
- * value.
+ * power well state and lane status to reconstruct the
+ * expected initial value.
*/
dev_priv->chv_phy_control =
PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY0) |
PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY1) |
- PHY_CH_POWER_MODE(PHY_CH_SU_PSR, DPIO_PHY0, DPIO_CH0) |
- PHY_CH_POWER_MODE(PHY_CH_SU_PSR, DPIO_PHY0, DPIO_CH1) |
- PHY_CH_POWER_MODE(PHY_CH_SU_PSR, DPIO_PHY1, DPIO_CH0);
- if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc))
+ PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH0) |
+ PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH1) |
+ PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY1, DPIO_CH0);
+
+ /*
+ * If all lanes are disabled we leave the override disabled
+ * with all power down bits cleared to match the state we
+ * would use after disabling the port. Otherwise enable the
+ * override and set the lane powerdown bits accding to the
+ * current lane status.
+ */
+ if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc)) {
+ uint32_t status = I915_READ(DPLL(PIPE_A));
+ unsigned int mask;
+
+ mask = status & DPLL_PORTB_READY_MASK;
+ if (mask == 0xf)
+ mask = 0x0;
+ else
+ dev_priv->chv_phy_control |=
+ PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0);
+
+ dev_priv->chv_phy_control |=
+ PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH0);
+
+ mask = (status & DPLL_PORTC_READY_MASK) >> 4;
+ if (mask == 0xf)
+ mask = 0x0;
+ else
+ dev_priv->chv_phy_control |=
+ PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1);
+
+ dev_priv->chv_phy_control |=
+ PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH1);
+
dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY0);
- if (cmn_d->ops->is_enabled(dev_priv, cmn_d))
+
+ dev_priv->chv_phy_assert[DPIO_PHY0] = false;
+ } else {
+ dev_priv->chv_phy_assert[DPIO_PHY0] = true;
+ }
+
+ if (cmn_d->ops->is_enabled(dev_priv, cmn_d)) {
+ uint32_t status = I915_READ(DPIO_PHY_STATUS);
+ unsigned int mask;
+
+ mask = status & DPLL_PORTD_READY_MASK;
+
+ if (mask == 0xf)
+ mask = 0x0;
+ else
+ dev_priv->chv_phy_control |=
+ PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0);
+
+ dev_priv->chv_phy_control |=
+ PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY1, DPIO_CH0);
+
dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY1);
+
+ dev_priv->chv_phy_assert[DPIO_PHY1] = false;
+ } else {
+ dev_priv->chv_phy_assert[DPIO_PHY1] = true;
+ }
+
+ I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
+
+ DRM_DEBUG_KMS("Initial PHY_CONTROL=0x%08x\n",
+ dev_priv->chv_phy_control);
}
static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv)
@@ -1688,7 +2048,9 @@ void intel_power_domains_init_hw(struct drm_i915_private *dev_priv)
power_domains->initializing = true;
if (IS_CHERRYVIEW(dev)) {
+ mutex_lock(&power_domains->lock);
chv_phy_control_init(dev_priv);
+ mutex_unlock(&power_domains->lock);
} else if (IS_VALLEYVIEW(dev)) {
mutex_lock(&power_domains->lock);
vlv_cmnlane_wa(dev_priv);
@@ -1820,8 +2182,6 @@ void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
if (!HAS_RUNTIME_PM(dev))
return;
- pm_runtime_set_active(device);
-
/*
* RPM depends on RC6 to save restore the GT HW context, so make RC6 a
* requirement.