summaryrefslogtreecommitdiff
path: root/drivers/mmc/core/core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/core/core.c')
-rw-r--r--drivers/mmc/core/core.c67
1 files changed, 50 insertions, 17 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 121ce50b6d5e..281826d1fcca 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -50,9 +50,6 @@
#include "sd_ops.h"
#include "sdio_ops.h"
-/* If the device is not responding */
-#define MMC_CORE_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */
-
/* The max erase timeout, used when host->max_busy_timeout isn't specified */
#define MMC_ERASE_TIMEOUT_MS (60 * 1000) /* 60 s */
@@ -1484,6 +1481,17 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
}
+void mmc_set_initial_signal_voltage(struct mmc_host *host)
+{
+ /* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
+ if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330))
+ dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n");
+ else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180))
+ dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n");
+ else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120))
+ dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n");
+}
+
int mmc_host_set_uhs_voltage(struct mmc_host *host)
{
u32 clock;
@@ -1646,19 +1654,13 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
/* Set initial state and call mmc_set_ios */
mmc_set_initial_state(host);
- /* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
- if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330))
- dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n");
- else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180))
- dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n");
- else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120))
- dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n");
+ mmc_set_initial_signal_voltage(host);
/*
* This delay should be sufficient to allow the power supply
* to reach the minimum voltage.
*/
- mmc_delay(10);
+ mmc_delay(host->ios.power_delay_ms);
mmc_pwrseq_post_power_on(host);
@@ -1671,7 +1673,7 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
* This delay must be at least 74 clock sizes, or 1 ms, or the
* time required to reach a stable voltage.
*/
- mmc_delay(10);
+ mmc_delay(host->ios.power_delay_ms);
}
void mmc_power_off(struct mmc_host *host)
@@ -1967,6 +1969,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
unsigned int qty = 0, busy_timeout = 0;
bool use_r1b_resp = false;
unsigned long timeout;
+ int loop_udelay=64, udelay_max=32768;
int err;
mmc_retune_hold(card->host);
@@ -2091,9 +2094,15 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
err = -EIO;
goto out;
}
+ if ((cmd.resp[0] & R1_READY_FOR_DATA) &&
+ R1_CURRENT_STATE(cmd.resp[0]) != R1_STATE_PRG)
+ break;
+
+ usleep_range(loop_udelay, loop_udelay*2);
+ if (loop_udelay < udelay_max)
+ loop_udelay *= 2;
+ } while (1);
- } while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
- (R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG));
out:
mmc_retune_release(card->host);
return err;
@@ -2435,22 +2444,46 @@ int mmc_hw_reset(struct mmc_host *host)
return -EINVAL;
mmc_bus_get(host);
- if (!host->bus_ops || host->bus_dead || !host->bus_ops->reset) {
+ if (!host->bus_ops || host->bus_dead || !host->bus_ops->hw_reset) {
mmc_bus_put(host);
return -EOPNOTSUPP;
}
- ret = host->bus_ops->reset(host);
+ ret = host->bus_ops->hw_reset(host);
mmc_bus_put(host);
if (ret)
- pr_warn("%s: tried to reset card, got error %d\n",
+ pr_warn("%s: tried to HW reset card, got error %d\n",
mmc_hostname(host), ret);
return ret;
}
EXPORT_SYMBOL(mmc_hw_reset);
+int mmc_sw_reset(struct mmc_host *host)
+{
+ int ret;
+
+ if (!host->card)
+ return -EINVAL;
+
+ mmc_bus_get(host);
+ if (!host->bus_ops || host->bus_dead || !host->bus_ops->sw_reset) {
+ mmc_bus_put(host);
+ return -EOPNOTSUPP;
+ }
+
+ ret = host->bus_ops->sw_reset(host);
+ mmc_bus_put(host);
+
+ if (ret)
+ pr_warn("%s: tried to SW reset card, got error %d\n",
+ mmc_hostname(host), ret);
+
+ return ret;
+}
+EXPORT_SYMBOL(mmc_sw_reset);
+
static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
{
host->f_init = freq;