summaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/core/block.c2
-rw-r--r--drivers/mmc/core/card.h6
-rw-r--r--drivers/mmc/core/core.c19
-rw-r--r--drivers/mmc/core/core.h2
-rw-r--r--drivers/mmc/core/mmc.c9
-rw-r--r--drivers/mmc/core/mmc_ops.c93
-rw-r--r--drivers/mmc/core/mmc_ops.h3
-rw-r--r--drivers/mmc/core/mmc_test.c14
-rw-r--r--drivers/mmc/core/slot-gpio.c97
-rw-r--r--drivers/mmc/host/Kconfig28
-rw-r--r--drivers/mmc/host/Makefile2
-rw-r--r--drivers/mmc/host/alcor.c1162
-rw-r--r--drivers/mmc/host/atmel-mci.c34
-rw-r--r--drivers/mmc/host/bcm2835.c71
-rw-r--r--drivers/mmc/host/dw_mmc-bluefield.c11
-rw-r--r--drivers/mmc/host/jz4740_mmc.c202
-rw-r--r--drivers/mmc/host/meson-gx-mmc.c100
-rw-r--r--drivers/mmc/host/meson-mx-sdio.c6
-rw-r--r--drivers/mmc/host/mmc_spi.c27
-rw-r--r--drivers/mmc/host/mmci.c11
-rw-r--r--drivers/mmc/host/mmci.h2
-rw-r--r--drivers/mmc/host/mtk-sd.c53
-rw-r--r--drivers/mmc/host/of_mmc_spi.c34
-rw-r--r--drivers/mmc/host/omap_hsmmc.c14
-rw-r--r--drivers/mmc/host/pxamci.c68
-rw-r--r--drivers/mmc/host/renesas_sdhi_core.c50
-rw-r--r--drivers/mmc/host/renesas_sdhi_internal_dmac.c28
-rw-r--r--drivers/mmc/host/renesas_sdhi_sys_dmac.c20
-rw-r--r--drivers/mmc/host/rtsx_usb_sdmmc.c44
-rw-r--r--drivers/mmc/host/s3cmci.c59
-rw-r--r--drivers/mmc/host/sdhci-acpi.c7
-rw-r--r--drivers/mmc/host/sdhci-cadence.c2
-rw-r--r--drivers/mmc/host/sdhci-esdhc-imx.c26
-rw-r--r--drivers/mmc/host/sdhci-esdhc.h24
-rw-r--r--drivers/mmc/host/sdhci-msm.c126
-rw-r--r--drivers/mmc/host/sdhci-of-arasan.c46
-rw-r--r--drivers/mmc/host/sdhci-of-esdhc.c151
-rw-r--r--drivers/mmc/host/sdhci-omap.c130
-rw-r--r--drivers/mmc/host/sdhci-pci-core.c19
-rw-r--r--drivers/mmc/host/sdhci-xenon-phy.c10
-rw-r--r--drivers/mmc/host/sdhci-xenon.c10
-rw-r--r--drivers/mmc/host/sdhci.c106
-rw-r--r--drivers/mmc/host/sdhci.h13
-rw-r--r--drivers/mmc/host/sdhci_am654.c374
-rw-r--r--drivers/mmc/host/tmio_mmc.h6
-rw-r--r--drivers/mmc/host/tmio_mmc_core.c41
46 files changed, 2574 insertions, 788 deletions
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 62e7619d5a4d..aef1185f383d 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1960,7 +1960,7 @@ static void mmc_blk_urgent_bkops(struct mmc_queue *mq,
struct mmc_queue_req *mqrq)
{
if (mmc_blk_urgent_bkops_needed(mq, mqrq))
- mmc_start_bkops(mq->card, true);
+ mmc_run_bkops(mq->card);
}
void mmc_blk_mq_complete(struct request *req)
diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h
index 1170feb8f969..eef301452406 100644
--- a/drivers/mmc/core/card.h
+++ b/drivers/mmc/core/card.h
@@ -23,15 +23,13 @@
#define MMC_STATE_BLOCKADDR (1<<2) /* card uses block-addressing */
#define MMC_CARD_SDXC (1<<3) /* card is SDXC */
#define MMC_CARD_REMOVED (1<<4) /* card has been removed */
-#define MMC_STATE_DOING_BKOPS (1<<5) /* card is doing BKOPS */
-#define MMC_STATE_SUSPENDED (1<<6) /* card is suspended */
+#define MMC_STATE_SUSPENDED (1<<5) /* card is suspended */
#define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT)
#define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
#define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR)
#define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
#define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED))
-#define mmc_card_doing_bkops(c) ((c)->state & MMC_STATE_DOING_BKOPS)
#define mmc_card_suspended(c) ((c)->state & MMC_STATE_SUSPENDED)
#define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
@@ -39,8 +37,6 @@
#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
#define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
-#define mmc_card_set_doing_bkops(c) ((c)->state |= MMC_STATE_DOING_BKOPS)
-#define mmc_card_clr_doing_bkops(c) ((c)->state &= ~MMC_STATE_DOING_BKOPS)
#define mmc_card_set_suspended(c) ((c)->state |= MMC_STATE_SUSPENDED)
#define mmc_card_clr_suspended(c) ((c)->state &= ~MMC_STATE_SUSPENDED)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 50a5c340307b..5bd58b95d318 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -887,7 +887,10 @@ void mmc_release_host(struct mmc_host *host)
spin_unlock_irqrestore(&host->lock, flags);
wake_up(&host->wq);
pm_runtime_mark_last_busy(mmc_dev(host));
- pm_runtime_put_autosuspend(mmc_dev(host));
+ if (host->caps & MMC_CAP_SYNC_RUNTIME_PM)
+ pm_runtime_put_sync_suspend(mmc_dev(host));
+ else
+ pm_runtime_put_autosuspend(mmc_dev(host));
}
}
EXPORT_SYMBOL(mmc_release_host);
@@ -2413,20 +2416,6 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
}
EXPORT_SYMBOL(mmc_set_blocklen);
-int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
- bool is_rel_write)
-{
- struct mmc_command cmd = {};
-
- cmd.opcode = MMC_SET_BLOCK_COUNT;
- cmd.arg = blockcount & 0x0000FFFF;
- if (is_rel_write)
- cmd.arg |= 1 << 31;
- cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
- return mmc_wait_for_cmd(card->host, &cmd, 5);
-}
-EXPORT_SYMBOL(mmc_set_blockcount);
-
static void mmc_hw_reset_for_init(struct mmc_host *host)
{
mmc_pwrseq_reset(host);
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 087ba68b2920..8fb6bc37f808 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -118,8 +118,6 @@ int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
unsigned int mmc_calc_max_discard(struct mmc_card *card);
int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
-int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
- bool is_rel_write);
int __mmc_claim_host(struct mmc_host *host, struct mmc_ctx *ctx,
atomic_t *abort);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 55997cf84b39..da892a599524 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1181,6 +1181,9 @@ static int mmc_select_hs400(struct mmc_card *card)
if (err)
goto out_err;
+ if (host->ops->hs400_prepare_ddr)
+ host->ops->hs400_prepare_ddr(host);
+
/* Switch card to DDR */
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
@@ -2011,12 +2014,6 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
if (mmc_card_suspended(host->card))
goto out;
- if (mmc_card_doing_bkops(host->card)) {
- err = mmc_stop_bkops(host->card);
- if (err)
- goto out;
- }
-
err = mmc_flush_cache(host->card);
if (err)
goto out;
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 873b2aa0c155..9054329fe903 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -802,12 +802,6 @@ static int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
unsigned int opcode;
int err;
- if (!card->ext_csd.hpi) {
- pr_warn("%s: Card didn't support HPI command\n",
- mmc_hostname(card->host));
- return -EINVAL;
- }
-
opcode = card->ext_csd.hpi_cmd;
if (opcode == MMC_STOP_TRANSMISSION)
cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
@@ -897,34 +891,6 @@ int mmc_can_ext_csd(struct mmc_card *card)
return (card && card->csd.mmca_vsn > CSD_SPEC_VER_3);
}
-/**
- * mmc_stop_bkops - stop ongoing BKOPS
- * @card: MMC card to check BKOPS
- *
- * Send HPI command to stop ongoing background operations to
- * allow rapid servicing of foreground operations, e.g. read/
- * writes. Wait until the card comes out of the programming state
- * to avoid errors in servicing read/write requests.
- */
-int mmc_stop_bkops(struct mmc_card *card)
-{
- int err = 0;
-
- err = mmc_interrupt_hpi(card);
-
- /*
- * If err is EINVAL, we can't issue an HPI.
- * It should complete the BKOPS.
- */
- if (!err || (err == -EINVAL)) {
- mmc_card_clr_doing_bkops(card);
- mmc_retune_release(card->host);
- err = 0;
- }
-
- return err;
-}
-
static int mmc_read_bkops_status(struct mmc_card *card)
{
int err;
@@ -941,22 +907,17 @@ static int mmc_read_bkops_status(struct mmc_card *card)
}
/**
- * mmc_start_bkops - start BKOPS for supported cards
- * @card: MMC card to start BKOPS
- * @from_exception: A flag to indicate if this function was
- * called due to an exception raised by the card
+ * mmc_run_bkops - Run BKOPS for supported cards
+ * @card: MMC card to run BKOPS for
*
- * Start background operations whenever requested.
- * When the urgent BKOPS bit is set in a R1 command response
- * then background operations should be started immediately.
+ * Run background operations synchronously for cards having manual BKOPS
+ * enabled and in case it reports urgent BKOPS level.
*/
-void mmc_start_bkops(struct mmc_card *card, bool from_exception)
+void mmc_run_bkops(struct mmc_card *card)
{
int err;
- int timeout;
- bool use_busy_signal;
- if (!card->ext_csd.man_bkops_en || mmc_card_doing_bkops(card))
+ if (!card->ext_csd.man_bkops_en)
return;
err = mmc_read_bkops_status(card);
@@ -966,44 +927,26 @@ void mmc_start_bkops(struct mmc_card *card, bool from_exception)
return;
}
- if (!card->ext_csd.raw_bkops_status)
- return;
-
- if (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2 &&
- from_exception)
+ if (!card->ext_csd.raw_bkops_status ||
+ card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2)
return;
- if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) {
- timeout = MMC_OPS_TIMEOUT_MS;
- use_busy_signal = true;
- } else {
- timeout = 0;
- use_busy_signal = false;
- }
-
mmc_retune_hold(card->host);
- err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_BKOPS_START, 1, timeout, 0,
- use_busy_signal, true, false);
- if (err) {
+ /*
+ * For urgent BKOPS status, LEVEL_2 and higher, let's execute
+ * synchronously. Future wise, we may consider to start BKOPS, for less
+ * urgent levels by using an asynchronous background task, when idle.
+ */
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_BKOPS_START, 1, MMC_OPS_TIMEOUT_MS);
+ if (err)
pr_warn("%s: Error %d starting bkops\n",
mmc_hostname(card->host), err);
- mmc_retune_release(card->host);
- return;
- }
- /*
- * For urgent bkops status (LEVEL_2 and more)
- * bkops executed synchronously, otherwise
- * the operation is in progress
- */
- if (!use_busy_signal)
- mmc_card_set_doing_bkops(card);
- else
- mmc_retune_release(card->host);
+ mmc_retune_release(card->host);
}
-EXPORT_SYMBOL(mmc_start_bkops);
+EXPORT_SYMBOL(mmc_run_bkops);
/*
* Flush the cache to the non-volatile storage.
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index a1390d486381..018a5e3f66d6 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -40,8 +40,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
bool use_busy_signal, bool send_status, bool retry_crc_err);
int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms);
-int mmc_stop_bkops(struct mmc_card *card);
-void mmc_start_bkops(struct mmc_card *card, bool from_exception);
+void mmc_run_bkops(struct mmc_card *card);
int mmc_flush_cache(struct mmc_card *card);
int mmc_cmdq_enable(struct mmc_card *card);
int mmc_cmdq_disable(struct mmc_card *card);
diff --git a/drivers/mmc/core/mmc_test.c b/drivers/mmc/core/mmc_test.c
index ef18daeaa4cc..eabb1cab1765 100644
--- a/drivers/mmc/core/mmc_test.c
+++ b/drivers/mmc/core/mmc_test.c
@@ -3145,17 +3145,7 @@ static int mtf_testlist_show(struct seq_file *sf, void *data)
return 0;
}
-static int mtf_testlist_open(struct inode *inode, struct file *file)
-{
- return single_open(file, mtf_testlist_show, inode->i_private);
-}
-
-static const struct file_operations mmc_test_fops_testlist = {
- .open = mtf_testlist_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(mtf_testlist);
static void mmc_test_free_dbgfs_file(struct mmc_card *card)
{
@@ -3216,7 +3206,7 @@ static int mmc_test_register_dbgfs_file(struct mmc_card *card)
goto err;
ret = __mmc_test_register_dbgfs_file(card, "testlist", S_IRUGO,
- &mmc_test_fops_testlist);
+ &mtf_testlist_fops);
if (ret)
goto err;
diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
index 86803a3a04dc..319ccd93383d 100644
--- a/drivers/mmc/core/slot-gpio.c
+++ b/drivers/mmc/core/slot-gpio.c
@@ -9,7 +9,6 @@
*/
#include <linux/err.h>
-#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
@@ -27,8 +26,8 @@ struct mmc_gpio {
bool override_cd_active_level;
irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id);
char *ro_label;
+ char *cd_label;
u32 cd_debounce_delay_ms;
- char cd_label[];
};
static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
@@ -45,15 +44,19 @@ static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
int mmc_gpio_alloc(struct mmc_host *host)
{
- size_t len = strlen(dev_name(host->parent)) + 4;
struct mmc_gpio *ctx = devm_kzalloc(host->parent,
- sizeof(*ctx) + 2 * len, GFP_KERNEL);
+ sizeof(*ctx), GFP_KERNEL);
if (ctx) {
- ctx->ro_label = ctx->cd_label + len;
ctx->cd_debounce_delay_ms = 200;
- snprintf(ctx->cd_label, len, "%s cd", dev_name(host->parent));
- snprintf(ctx->ro_label, len, "%s ro", dev_name(host->parent));
+ ctx->cd_label = devm_kasprintf(host->parent, GFP_KERNEL,
+ "%s cd", dev_name(host->parent));
+ if (!ctx->cd_label)
+ return -ENOMEM;
+ ctx->ro_label = devm_kasprintf(host->parent, GFP_KERNEL,
+ "%s ro", dev_name(host->parent));
+ if (!ctx->ro_label)
+ return -ENOMEM;
host->slot.handler_priv = ctx;
host->slot.cd_irq = -EINVAL;
}
@@ -98,36 +101,6 @@ int mmc_gpio_get_cd(struct mmc_host *host)
}
EXPORT_SYMBOL(mmc_gpio_get_cd);
-/**
- * mmc_gpio_request_ro - request a gpio for write-protection
- * @host: mmc host
- * @gpio: gpio number requested
- *
- * As devm_* managed functions are used in mmc_gpio_request_ro(), client
- * drivers do not need to worry about freeing up memory.
- *
- * Returns zero on success, else an error.
- */
-int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio)
-{
- struct mmc_gpio *ctx = host->slot.handler_priv;
- int ret;
-
- if (!gpio_is_valid(gpio))
- return -EINVAL;
-
- ret = devm_gpio_request_one(host->parent, gpio, GPIOF_DIR_IN,
- ctx->ro_label);
- if (ret < 0)
- return ret;
-
- ctx->override_ro_active_level = true;
- ctx->ro_gpio = gpio_to_desc(gpio);
-
- return 0;
-}
-EXPORT_SYMBOL(mmc_gpio_request_ro);
-
void mmc_gpiod_request_cd_irq(struct mmc_host *host)
{
struct mmc_gpio *ctx = host->slot.handler_priv;
@@ -197,50 +170,6 @@ void mmc_gpio_set_cd_isr(struct mmc_host *host,
EXPORT_SYMBOL(mmc_gpio_set_cd_isr);
/**
- * mmc_gpio_request_cd - request a gpio for card-detection
- * @host: mmc host
- * @gpio: gpio number requested
- * @debounce: debounce time in microseconds
- *
- * As devm_* managed functions are used in mmc_gpio_request_cd(), client
- * drivers do not need to worry about freeing up memory.
- *
- * If GPIO debouncing is desired, set the debounce parameter to a non-zero
- * value. The caller is responsible for ensuring that the GPIO driver associated
- * with the GPIO supports debouncing, otherwise an error will be returned.
- *
- * Returns zero on success, else an error.
- */
-int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
- unsigned int debounce)
-{
- struct mmc_gpio *ctx = host->slot.handler_priv;
- int ret;
-
- ret = devm_gpio_request_one(host->parent, gpio, GPIOF_DIR_IN,
- ctx->cd_label);
- if (ret < 0)
- /*
- * don't bother freeing memory. It might still get used by other
- * slot functions, in any case it will be freed, when the device
- * is destroyed.
- */
- return ret;
-
- if (debounce) {
- ret = gpio_set_debounce(gpio, debounce);
- if (ret < 0)
- return ret;
- }
-
- ctx->override_cd_active_level = true;
- ctx->cd_gpio = gpio_to_desc(gpio);
-
- return 0;
-}
-EXPORT_SYMBOL(mmc_gpio_request_cd);
-
-/**
* mmc_gpiod_request_cd - request a gpio descriptor for card-detection
* @host: mmc host
* @con_id: function within the GPIO consumer
@@ -250,8 +179,7 @@ EXPORT_SYMBOL(mmc_gpio_request_cd);
* @gpio_invert: will return whether the GPIO line is inverted or not, set
* to NULL to ignore
*
- * Use this function in place of mmc_gpio_request_cd() to use the GPIO
- * descriptor API. Note that it must be called prior to mmc_add_host()
+ * Note that this must be called prior to mmc_add_host()
* otherwise the caller must also call mmc_gpiod_request_cd_irq().
*
* Returns zero on success, else an error.
@@ -302,9 +230,6 @@ EXPORT_SYMBOL(mmc_can_gpio_cd);
* @gpio_invert: will return whether the GPIO line is inverted or not,
* set to NULL to ignore
*
- * Use this function in place of mmc_gpio_request_ro() to use the GPIO
- * descriptor API.
- *
* Returns zero on success, else an error.
*/
int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1b58739d9744..e26b8145efb3 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -441,6 +441,13 @@ config MMC_WBSD
If unsure, say N.
+config MMC_ALCOR
+ tristate "Alcor Micro/Alcor Link SD/MMC controller"
+ depends on MISC_ALCOR_PCI
+ help
+ Say Y here to include driver code to support SD/MMC card interface
+ of Alcor Micro PCI-E card reader
+
config MMC_AU1X
tristate "Alchemy AU1XX0 MMC Card Interface support"
depends on MIPS_ALCHEMY
@@ -646,13 +653,14 @@ config MMC_SDHI_SYS_DMAC
config MMC_SDHI_INTERNAL_DMAC
tristate "DMA for SDHI SD/SDIO controllers using on-chip bus mastering"
- depends on ARM64 || ARCH_R8A77470 || COMPILE_TEST
+ depends on ARM64 || ARCH_R7S9210 || ARCH_R8A77470 || COMPILE_TEST
depends on MMC_SDHI
- default MMC_SDHI if (ARM64 || ARCH_R8A77470)
+ default MMC_SDHI if (ARM64 || ARCH_R7S9210 || ARCH_R8A77470)
help
This provides DMA support for SDHI SD/SDIO controllers
using on-chip bus mastering. This supports the controllers
- found in arm64 based SoCs.
+ found in arm64 based SoCs. This controller is also found in
+ some RZ family SoCs.
config MMC_UNIPHIER
tristate "UniPhier SD/eMMC Host Controller support"
@@ -969,6 +977,8 @@ config MMC_SDHCI_XENON
config MMC_SDHCI_OMAP
tristate "TI SDHCI Controller Support"
depends on MMC_SDHCI_PLTFM && OF
+ select THERMAL
+ select TI_SOC_THERMAL
help
This selects the Secure Digital Host Controller Interface (SDHCI)
support present in TI's DRA7 SOCs. The controller supports
@@ -977,3 +987,15 @@ config MMC_SDHCI_OMAP
If you have a controller with this interface, say Y or M here.
If unsure, say N.
+
+config MMC_SDHCI_AM654
+ tristate "Support for the SDHCI Controller in TI's AM654 SOCs"
+ depends on MMC_SDHCI_PLTFM && OF
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ support present in TI's AM654 SOCs. The controller supports
+ SD/MMC/SDIO devices.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 720d37777098..73578718f119 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -22,8 +22,10 @@ obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o
obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o
obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
+obj-$(CONFIG_MMC_SDHCI_AM654) += sdhci_am654.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+obj-$(CONFIG_MMC_ALCOR) += alcor.o
obj-$(CONFIG_MMC_MTK) += mtk-sd.o
obj-$(CONFIG_MMC_OMAP) += omap.o
obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
diff --git a/drivers/mmc/host/alcor.c b/drivers/mmc/host/alcor.c
new file mode 100644
index 000000000000..c712b7deb3a9
--- /dev/null
+++ b/drivers/mmc/host/alcor.c
@@ -0,0 +1,1162 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Driver for Alcor Micro AU6601 and AU6621 controllers
+ */
+
+/* Note: this driver was created without any documentation. Based
+ * on sniffing, testing and in some cases mimic of original driver.
+ * As soon as some one with documentation or more experience in SD/MMC, or
+ * reverse engineering then me, please review this driver and question every
+ * thing what I did. 2018 Oleksij Rempel <linux@rempel-privat.de>
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+
+#include <linux/alcor_pci.h>
+
+enum alcor_cookie {
+ COOKIE_UNMAPPED,
+ COOKIE_PRE_MAPPED,
+ COOKIE_MAPPED,
+};
+
+struct alcor_pll_conf {
+ unsigned int clk_src_freq;
+ unsigned int clk_src_reg;
+ unsigned int min_div;
+ unsigned int max_div;
+};
+
+struct alcor_sdmmc_host {
+ struct device *dev;
+ struct alcor_pci_priv *alcor_pci;
+
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ unsigned int dma_on:1;
+ unsigned int early_data:1;
+
+ struct mutex cmd_mutex;
+
+ struct delayed_work timeout_work;
+
+ struct sg_mapping_iter sg_miter; /* SG state for PIO */
+ struct scatterlist *sg;
+ unsigned int blocks; /* remaining PIO blocks */
+ int sg_count;
+
+ u32 irq_status_sd;
+ unsigned char cur_power_mode;
+};
+
+static const struct alcor_pll_conf alcor_pll_cfg[] = {
+ /* MHZ, CLK src, max div, min div */
+ { 31250000, AU6601_CLK_31_25_MHZ, 1, 511},
+ { 48000000, AU6601_CLK_48_MHZ, 1, 511},
+ {125000000, AU6601_CLK_125_MHZ, 1, 511},
+ {384000000, AU6601_CLK_384_MHZ, 1, 511},
+};
+
+static inline void alcor_rmw8(struct alcor_sdmmc_host *host, unsigned int addr,
+ u8 clear, u8 set)
+{
+ struct alcor_pci_priv *priv = host->alcor_pci;
+ u32 var;
+
+ var = alcor_read8(priv, addr);
+ var &= ~clear;
+ var |= set;
+ alcor_write8(priv, var, addr);
+}
+
+/* As soon as irqs are masked, some status updates may be missed.
+ * Use this with care.
+ */
+static inline void alcor_mask_sd_irqs(struct alcor_sdmmc_host *host)
+{
+ struct alcor_pci_priv *priv = host->alcor_pci;
+
+ alcor_write32(priv, 0, AU6601_REG_INT_ENABLE);
+}
+
+static inline void alcor_unmask_sd_irqs(struct alcor_sdmmc_host *host)
+{
+ struct alcor_pci_priv *priv = host->alcor_pci;
+
+ alcor_write32(priv, AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK |
+ AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE |
+ AU6601_INT_OVER_CURRENT_ERR,
+ AU6601_REG_INT_ENABLE);
+}
+
+static void alcor_reset(struct alcor_sdmmc_host *host, u8 val)
+{
+ struct alcor_pci_priv *priv = host->alcor_pci;
+ int i;
+
+ alcor_write8(priv, val | AU6601_BUF_CTRL_RESET,
+ AU6601_REG_SW_RESET);
+ for (i = 0; i < 100; i++) {
+ if (!(alcor_read8(priv, AU6601_REG_SW_RESET) & val))
+ return;
+ udelay(50);
+ }
+ dev_err(host->dev, "%s: timeout\n", __func__);
+}
+
+static void alcor_data_set_dma(struct alcor_sdmmc_host *host)
+{
+ struct alcor_pci_priv *priv = host->alcor_pci;
+ u32 addr;
+
+ if (!host->sg_count)
+ return;
+
+ if (!host->sg) {
+ dev_err(host->dev, "have blocks, but no SG\n");
+ return;
+ }
+
+ if (!sg_dma_len(host->sg)) {
+ dev_err(host->dev, "DMA SG len == 0\n");
+ return;
+ }
+
+
+ addr = (u32)sg_dma_address(host->sg);
+
+ alcor_write32(priv, addr, AU6601_REG_SDMA_ADDR);
+ host->sg = sg_next(host->sg);
+ host->sg_count--;
+}
+
+static void alcor_trigger_data_transfer(struct alcor_sdmmc_host *host,
+ bool early)
+{
+ struct alcor_pci_priv *priv = host->alcor_pci;
+ struct mmc_data *data = host->data;
+ u8 ctrl = 0;
+
+ if (data->flags & MMC_DATA_WRITE)
+ ctrl |= AU6601_DATA_WRITE;
+
+ if (data->host_cookie == COOKIE_MAPPED) {
+ if (host->early_data) {
+ host->early_data = false;
+ return;
+ }
+
+ host->early_data = early;
+
+ alcor_data_set_dma(host);
+ ctrl |= AU6601_DATA_DMA_MODE;
+ host->dma_on = 1;
+ alcor_write32(priv, data->sg_count * 0x1000,
+ AU6601_REG_BLOCK_SIZE);
+ } else {
+ alcor_write32(priv, data->blksz, AU6601_REG_BLOCK_SIZE);
+ }
+
+ alcor_write8(priv, ctrl | AU6601_DATA_START_XFER,
+ AU6601_DATA_XFER_CTRL);
+}
+
+static void alcor_trf_block_pio(struct alcor_sdmmc_host *host, bool read)
+{
+ struct alcor_pci_priv *priv = host->alcor_pci;
+ size_t blksize, len;
+ u8 *buf;
+
+ if (!host->blocks)
+ return;
+
+ if (host->dma_on) {
+ dev_err(host->dev, "configured DMA but got PIO request.\n");
+ return;
+ }
+
+ if (!!(host->data->flags & MMC_DATA_READ) != read) {
+ dev_err(host->dev, "got unexpected direction %i != %i\n",
+ !!(host->data->flags & MMC_DATA_READ), read);
+ }
+
+ if (!sg_miter_next(&host->sg_miter))
+ return;
+
+ blksize = host->data->blksz;
+ len = min(host->sg_miter.length, blksize);
+
+ dev_dbg(host->dev, "PIO, %s block size: 0x%zx\n",
+ read ? "read" : "write", blksize);
+
+ host->sg_miter.consumed = len;
+ host->blocks--;
+
+ buf = host->sg_miter.addr;
+
+ if (read)
+ ioread32_rep(priv->iobase + AU6601_REG_BUFFER, buf, len >> 2);
+ else
+ iowrite32_rep(priv->iobase + AU6601_REG_BUFFER, buf, len >> 2);
+
+ sg_miter_stop(&host->sg_miter);
+}
+
+static void alcor_prepare_sg_miter(struct alcor_sdmmc_host *host)
+{
+ unsigned int flags = SG_MITER_ATOMIC;
+ struct mmc_data *data = host->data;
+
+ if (data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+}
+
+static void alcor_prepare_data(struct alcor_sdmmc_host *host,
+ struct mmc_command *cmd)
+{
+ struct mmc_data *data = cmd->data;
+
+ if (!data)
+ return;
+
+
+ host->data = data;
+ host->data->bytes_xfered = 0;
+ host->blocks = data->blocks;
+ host->sg = data->sg;
+ host->sg_count = data->sg_count;
+ dev_dbg(host->dev, "prepare DATA: sg %i, blocks: %i\n",
+ host->sg_count, host->blocks);
+
+ if (data->host_cookie != COOKIE_MAPPED)
+ alcor_prepare_sg_miter(host);
+
+ alcor_trigger_data_transfer(host, true);
+}
+
+static void alcor_send_cmd(struct alcor_sdmmc_host *host,
+ struct mmc_command *cmd, bool set_timeout)
+{
+ struct alcor_pci_priv *priv = host->alcor_pci;
+ unsigned long timeout = 0;
+ u8 ctrl = 0;
+
+ host->cmd = cmd;
+ alcor_prepare_data(host, cmd);
+
+ dev_dbg(host->dev, "send CMD. opcode: 0x%02x, arg; 0x%08x\n",
+ cmd->opcode, cmd->arg);
+ alcor_write8(priv, cmd->opcode | 0x40, AU6601_REG_CMD_OPCODE);
+ alcor_write32be(priv, cmd->arg, AU6601_REG_CMD_ARG);
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ ctrl = AU6601_CMD_NO_RESP;
+ break;
+ case MMC_RSP_R1:
+ ctrl = AU6601_CMD_6_BYTE_CRC;
+ break;
+ case MMC_RSP_R1B:
+ ctrl = AU6601_CMD_6_BYTE_CRC | AU6601_CMD_STOP_WAIT_RDY;
+ break;
+ case MMC_RSP_R2:
+ ctrl = AU6601_CMD_17_BYTE_CRC;
+ break;
+ case MMC_RSP_R3:
+ ctrl = AU6601_CMD_6_BYTE_WO_CRC;
+ break;
+ default:
+ dev_err(host->dev, "%s: cmd->flag (0x%02x) is not valid\n",
+ mmc_hostname(host->mmc), mmc_resp_type(cmd));
+ break;
+ }
+
+ if (set_timeout) {
+ if (!cmd->data && cmd->busy_timeout)
+ timeout = cmd->busy_timeout;
+ else
+ timeout = 10000;
+
+ schedule_delayed_work(&host->timeout_work,
+ msecs_to_jiffies(timeout));
+ }
+
+ dev_dbg(host->dev, "xfer ctrl: 0x%02x; timeout: %lu\n", ctrl, timeout);
+ alcor_write8(priv, ctrl | AU6601_CMD_START_XFER,
+ AU6601_CMD_XFER_CTRL);
+}
+
+static void alcor_request_complete(struct alcor_sdmmc_host *host,
+ bool cancel_timeout)
+{
+ struct mmc_request *mrq;
+
+ /*
+ * If this work gets rescheduled while running, it will
+ * be run again afterwards but without any active request.
+ */
+ if (!host->mrq)
+ return;
+
+ if (cancel_timeout)
+ cancel_delayed_work(&host->timeout_work);
+
+ mrq = host->mrq;
+
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+ host->dma_on = 0;
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+static void alcor_finish_data(struct alcor_sdmmc_host *host)
+{
+ struct mmc_data *data;
+
+ data = host->data;
+ host->data = NULL;
+ host->dma_on = 0;
+
+ /*
+ * The specification states that the block count register must
+ * be updated, but it does not specify at what point in the
+ * data flow. That makes the register entirely useless to read
+ * back so we have to assume that nothing made it to the card
+ * in the event of an error.
+ */
+ if (data->error)
+ data->bytes_xfered = 0;
+ else
+ data->bytes_xfered = data->blksz * data->blocks;
+
+ /*
+ * Need to send CMD12 if -
+ * a) open-ended multiblock transfer (no CMD23)
+ * b) error in multiblock transfer
+ */
+ if (data->stop &&
+ (data->error ||
+ !host->mrq->sbc)) {
+
+ /*
+ * The controller needs a reset of internal state machines
+ * upon error conditions.
+ */
+ if (data->error)
+ alcor_reset(host, AU6601_RESET_CMD | AU6601_RESET_DATA);
+
+ alcor_unmask_sd_irqs(host);
+ alcor_send_cmd(host, data->stop, false);
+ return;
+ }
+
+ alcor_request_complete(host, 1);
+}
+
+static void alcor_err_irq(struct alcor_sdmmc_host *host, u32 intmask)
+{
+ dev_dbg(host->dev, "ERR IRQ %x\n", intmask);
+
+ if (host->cmd) {
+ if (intmask & AU6601_INT_CMD_TIMEOUT_ERR)
+ host->cmd->error = -ETIMEDOUT;
+ else
+ host->cmd->error = -EILSEQ;
+ }
+
+ if (host->data) {
+ if (intmask & AU6601_INT_DATA_TIMEOUT_ERR)
+ host->data->error = -ETIMEDOUT;
+ else
+ host->data->error = -EILSEQ;
+
+ host->data->bytes_xfered = 0;
+ }
+
+ alcor_reset(host, AU6601_RESET_CMD | AU6601_RESET_DATA);
+ alcor_request_complete(host, 1);
+}
+
+static int alcor_cmd_irq_done(struct alcor_sdmmc_host *host, u32 intmask)
+{
+ struct alcor_pci_priv *priv = host->alcor_pci;
+
+ intmask &= AU6601_INT_CMD_END;
+
+ if (!intmask)
+ return true;
+
+ /* got CMD_END but no CMD is in progress, wake thread an process the
+ * error
+ */
+ if (!host->cmd)
+ return false;
+
+ if (host->cmd->flags & MMC_RSP_PRESENT) {
+ struct mmc_command *cmd = host->cmd;
+
+ cmd->resp[0] = alcor_read32be(priv, AU6601_REG_CMD_RSP0);
+ dev_dbg(host->dev, "RSP0: 0x%04x\n", cmd->resp[0]);
+ if (host->cmd->flags & MMC_RSP_136) {
+ cmd->resp[1] =
+ alcor_read32be(priv, AU6601_REG_CMD_RSP1);
+ cmd->resp[2] =
+ alcor_read32be(priv, AU6601_REG_CMD_RSP2);
+ cmd->resp[3] =
+ alcor_read32be(priv, AU6601_REG_CMD_RSP3);
+ dev_dbg(host->dev, "RSP1,2,3: 0x%04x 0x%04x 0x%04x\n",
+ cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+ }
+
+ }
+
+ host->cmd->error = 0;
+
+ /* Processed actual command. */
+ if (!host->data)
+ return false;
+
+ alcor_trigger_data_transfer(host, false);
+ host->cmd = NULL;
+ return true;
+}
+
+static void alcor_cmd_irq_thread(struct alcor_sdmmc_host *host, u32 intmask)
+{
+ intmask &= AU6601_INT_CMD_END;
+
+ if (!intmask)
+ return;
+
+ if (!host->cmd && intmask & AU6601_INT_CMD_END) {
+ dev_dbg(host->dev, "Got command interrupt 0x%08x even though no command operation was in progress.\n",
+ intmask);
+ }
+
+ /* Processed actual command. */
+ if (!host->data)
+ alcor_request_complete(host, 1);
+ else
+ alcor_trigger_data_transfer(host, false);
+ host->cmd = NULL;
+}
+
+static int alcor_data_irq_done(struct alcor_sdmmc_host *host, u32 intmask)
+{
+ u32 tmp;
+
+ intmask &= AU6601_INT_DATA_MASK;
+
+ /* nothing here to do */
+ if (!intmask)
+ return 1;
+
+ /* we was too fast and got DATA_END after it was processed?
+ * lets ignore it for now.
+ */
+ if (!host->data && intmask == AU6601_INT_DATA_END)
+ return 1;
+
+ /* looks like an error, so lets handle it. */
+ if (!host->data)
+ return 0;
+
+ tmp = intmask & (AU6601_INT_READ_BUF_RDY | AU6601_INT_WRITE_BUF_RDY
+ | AU6601_INT_DMA_END);
+ switch (tmp) {
+ case 0:
+ break;
+ case AU6601_INT_READ_BUF_RDY:
+ alcor_trf_block_pio(host, true);
+ if (!host->blocks)
+ break;
+ alcor_trigger_data_transfer(host, false);
+ return 1;
+ case AU6601_INT_WRITE_BUF_RDY:
+ alcor_trf_block_pio(host, false);
+ if (!host->blocks)
+ break;
+ alcor_trigger_data_transfer(host, false);
+ return 1;
+ case AU6601_INT_DMA_END:
+ if (!host->sg_count)
+ break;
+
+ alcor_data_set_dma(host);
+ break;
+ default:
+ dev_err(host->dev, "Got READ_BUF_RDY and WRITE_BUF_RDY at same time\n");
+ break;
+ }
+
+ if (intmask & AU6601_INT_DATA_END)
+ return 0;
+
+ return 1;
+}
+
+static void alcor_data_irq_thread(struct alcor_sdmmc_host *host, u32 intmask)
+{
+ intmask &= AU6601_INT_DATA_MASK;
+
+ if (!intmask)
+ return;
+
+ if (!host->data) {
+ dev_dbg(host->dev, "Got data interrupt 0x%08x even though no data operation was in progress.\n",
+ intmask);
+ alcor_reset(host, AU6601_RESET_DATA);
+ return;
+ }
+
+ if (alcor_data_irq_done(host, intmask))
+ return;
+
+ if ((intmask & AU6601_INT_DATA_END) || !host->blocks ||
+ (host->dma_on && !host->sg_count))
+ alcor_finish_data(host);
+}
+
+static void alcor_cd_irq(struct alcor_sdmmc_host *host, u32 intmask)
+{
+ dev_dbg(host->dev, "card %s\n",
+ intmask & AU6601_INT_CARD_REMOVE ? "removed" : "inserted");
+
+ if (host->mrq) {
+ dev_dbg(host->dev, "cancel all pending tasks.\n");
+
+ if (host->data)
+ host->data->error = -ENOMEDIUM;
+
+ if (host->cmd)
+ host->cmd->error = -ENOMEDIUM;
+ else
+ host->mrq->cmd->error = -ENOMEDIUM;
+
+ alcor_request_complete(host, 1);
+ }
+
+ mmc_detect_change(host->mmc, msecs_to_jiffies(1));
+}
+
+static irqreturn_t alcor_irq_thread(int irq, void *d)
+{
+ struct alcor_sdmmc_host *host = d;
+ irqreturn_t ret = IRQ_HANDLED;
+ u32 intmask, tmp;
+
+ mutex_lock(&host->cmd_mutex);
+
+ intmask = host->irq_status_sd;
+
+ /* some thing bad */
+ if (unlikely(!intmask || AU6601_INT_ALL_MASK == intmask)) {
+ dev_dbg(host->dev, "unexpected IRQ: 0x%04x\n", intmask);
+ ret = IRQ_NONE;
+ goto exit;
+ }
+
+ tmp = intmask & (AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK);
+ if (tmp) {
+ if (tmp & AU6601_INT_ERROR_MASK)
+ alcor_err_irq(host, tmp);
+ else {
+ alcor_cmd_irq_thread(host, tmp);
+ alcor_data_irq_thread(host, tmp);
+ }
+ intmask &= ~(AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK);
+ }
+
+ if (intmask & (AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE)) {
+ alcor_cd_irq(host, intmask);
+ intmask &= ~(AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE);
+ }
+
+ if (intmask & AU6601_INT_OVER_CURRENT_ERR) {
+ dev_warn(host->dev,
+ "warning: over current detected!\n");
+ intmask &= ~AU6601_INT_OVER_CURRENT_ERR;
+ }
+
+ if (intmask)
+ dev_dbg(host->dev, "got not handled IRQ: 0x%04x\n", intmask);
+
+exit:
+ mutex_unlock(&host->cmd_mutex);
+ alcor_unmask_sd_irqs(host);
+ return ret;
+}
+
+
+static irqreturn_t alcor_irq(int irq, void *d)
+{
+ struct alcor_sdmmc_host *host = d;
+ struct alcor_pci_priv *priv = host->alcor_pci;
+ u32 status, tmp;
+ irqreturn_t ret;
+ int cmd_done, data_done;
+
+ status = alcor_read32(priv, AU6601_REG_INT_STATUS);
+ if (!status)
+ return IRQ_NONE;
+
+ alcor_write32(priv, status, AU6601_REG_INT_STATUS);
+
+ tmp = status & (AU6601_INT_READ_BUF_RDY | AU6601_INT_WRITE_BUF_RDY
+ | AU6601_INT_DATA_END | AU6601_INT_DMA_END
+ | AU6601_INT_CMD_END);
+ if (tmp == status) {
+ cmd_done = alcor_cmd_irq_done(host, tmp);
+ data_done = alcor_data_irq_done(host, tmp);
+ /* use fast path for simple tasks */
+ if (cmd_done && data_done) {
+ ret = IRQ_HANDLED;
+ goto alcor_irq_done;
+ }
+ }
+
+ host->irq_status_sd = status;
+ ret = IRQ_WAKE_THREAD;
+ alcor_mask_sd_irqs(host);
+alcor_irq_done:
+ return ret;
+}
+
+static void alcor_set_clock(struct alcor_sdmmc_host *host, unsigned int clock)
+{
+ struct alcor_pci_priv *priv = host->alcor_pci;
+ int i, diff = 0x7fffffff, tmp_clock = 0;
+ u16 clk_src = 0;
+ u8 clk_div = 0;
+
+ if (clock == 0) {
+ alcor_write16(priv, 0, AU6601_CLK_SELECT);
+ return;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(alcor_pll_cfg); i++) {
+ unsigned int tmp_div, tmp_diff;
+ const struct alcor_pll_conf *cfg = &alcor_pll_cfg[i];
+
+ tmp_div = DIV_ROUND_UP(cfg->clk_src_freq, clock);
+ if (cfg->min_div > tmp_div || tmp_div > cfg->max_div)
+ continue;
+
+ tmp_clock = DIV_ROUND_UP(cfg->clk_src_freq, tmp_div);
+ tmp_diff = abs(clock - tmp_clock);
+
+ if (tmp_diff >= 0 && tmp_diff < diff) {
+ diff = tmp_diff;
+ clk_src = cfg->clk_src_reg;
+ clk_div = tmp_div;
+ }
+ }
+
+ clk_src |= ((clk_div - 1) << 8);
+ clk_src |= AU6601_CLK_ENABLE;
+
+ dev_dbg(host->dev, "set freq %d cal freq %d, use div %d, mod %x\n",
+ clock, tmp_clock, clk_div, clk_src);
+
+ alcor_write16(priv, clk_src, AU6601_CLK_SELECT);
+
+}
+
+static void alcor_set_timing(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct alcor_sdmmc_host *host = mmc_priv(mmc);
+
+ if (ios->timing == MMC_TIMING_LEGACY) {
+ alcor_rmw8(host, AU6601_CLK_DELAY,
+ AU6601_CLK_POSITIVE_EDGE_ALL, 0);
+ } else {
+ alcor_rmw8(host, AU6601_CLK_DELAY,
+ 0, AU6601_CLK_POSITIVE_EDGE_ALL);
+ }
+}
+
+static void alcor_set_bus_width(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct alcor_sdmmc_host *host = mmc_priv(mmc);
+ struct alcor_pci_priv *priv = host->alcor_pci;
+
+ if (ios->bus_width == MMC_BUS_WIDTH_1) {
+ alcor_write8(priv, 0, AU6601_REG_BUS_CTRL);
+ } else if (ios->bus_width == MMC_BUS_WIDTH_4) {
+ alcor_write8(priv, AU6601_BUS_WIDTH_4BIT,
+ AU6601_REG_BUS_CTRL);
+ } else
+ dev_err(host->dev, "Unknown BUS mode\n");
+
+}
+
+static int alcor_card_busy(struct mmc_host *mmc)
+{
+ struct alcor_sdmmc_host *host = mmc_priv(mmc);
+ struct alcor_pci_priv *priv = host->alcor_pci;
+ u8 status;
+
+ /* Check whether dat[0:3] low */
+ status = alcor_read8(priv, AU6601_DATA_PIN_STATE);
+
+ return !(status & AU6601_BUS_STAT_DAT_MASK);
+}
+
+static int alcor_get_cd(struct mmc_host *mmc)
+{
+ struct alcor_sdmmc_host *host = mmc_priv(mmc);
+ struct alcor_pci_priv *priv = host->alcor_pci;
+ u8 detect;
+
+ detect = alcor_read8(priv, AU6601_DETECT_STATUS)
+ & AU6601_DETECT_STATUS_M;
+ /* check if card is present then send command and data */
+ return (detect == AU6601_SD_DETECTED);
+}
+
+static int alcor_get_ro(struct mmc_host *mmc)
+{
+ struct alcor_sdmmc_host *host = mmc_priv(mmc);
+ struct alcor_pci_priv *priv = host->alcor_pci;
+ u8 status;
+
+ /* get write protect pin status */
+ status = alcor_read8(priv, AU6601_INTERFACE_MODE_CTRL);
+
+ return !!(status & AU6601_SD_CARD_WP);
+}
+
+static void alcor_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct alcor_sdmmc_host *host = mmc_priv(mmc);
+
+ mutex_lock(&host->cmd_mutex);
+
+ host->mrq = mrq;
+
+ /* check if card is present then send command and data */
+ if (alcor_get_cd(mmc))
+ alcor_send_cmd(host, mrq->cmd, true);
+ else {
+ mrq->cmd->error = -ENOMEDIUM;
+ alcor_request_complete(host, 1);
+ }
+
+ mutex_unlock(&host->cmd_mutex);
+}
+
+static void alcor_pre_req(struct mmc_host *mmc,
+ struct mmc_request *mrq)
+{
+ struct alcor_sdmmc_host *host = mmc_priv(mmc);
+ struct mmc_data *data = mrq->data;
+ struct mmc_command *cmd = mrq->cmd;
+ struct scatterlist *sg;
+ unsigned int i, sg_len;
+
+ if (!data || !cmd)
+ return;
+
+ data->host_cookie = COOKIE_UNMAPPED;
+
+ /* FIXME: looks like the DMA engine works only with CMD18 */
+ if (cmd->opcode != 18)
+ return;
+ /*
+ * We don't do DMA on "complex" transfers, i.e. with
+ * non-word-aligned buffers or lengths. Also, we don't bother
+ * with all the DMA setup overhead for short transfers.
+ */
+ if (data->blocks * data->blksz < AU6601_MAX_DMA_BLOCK_SIZE)
+ return;
+
+ if (data->blksz & 3)
+ return;
+
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg->length != AU6601_MAX_DMA_BLOCK_SIZE)
+ return;
+ }
+
+ /* This data might be unmapped at this time */
+
+ sg_len = dma_map_sg(host->dev, data->sg, data->sg_len,
+ mmc_get_dma_dir(data));
+ if (sg_len)
+ data->host_cookie = COOKIE_MAPPED;
+
+ data->sg_count = sg_len;
+}
+
+static void alcor_post_req(struct mmc_host *mmc,
+ struct mmc_request *mrq,
+ int err)
+{
+ struct alcor_sdmmc_host *host = mmc_priv(mmc);
+ struct mmc_data *data = mrq->data;
+
+ if (!data)
+ return;
+
+ if (data->host_cookie == COOKIE_MAPPED) {
+ dma_unmap_sg(host->dev,
+ data->sg,
+ data->sg_len,
+ mmc_get_dma_dir(data));
+ }
+
+ data->host_cookie = COOKIE_UNMAPPED;
+}
+
+static void alcor_set_power_mode(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct alcor_sdmmc_host *host = mmc_priv(mmc);
+ struct alcor_pci_priv *priv = host->alcor_pci;
+
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ alcor_set_clock(host, ios->clock);
+ /* set all pins to input */
+ alcor_write8(priv, 0, AU6601_OUTPUT_ENABLE);
+ /* turn of VDD */
+ alcor_write8(priv, 0, AU6601_POWER_CONTROL);
+ break;
+ case MMC_POWER_UP:
+ break;
+ case MMC_POWER_ON:
+ /* This is most trickiest part. The order and timings of
+ * instructions seems to play important role. Any changes may
+ * confuse internal state engine if this HW.
+ * FIXME: If we will ever get access to documentation, then this
+ * part should be reviewed again.
+ */
+
+ /* enable SD card mode */
+ alcor_write8(priv, AU6601_SD_CARD,
+ AU6601_ACTIVE_CTRL);
+ /* set signal voltage to 3.3V */
+ alcor_write8(priv, 0, AU6601_OPT);
+ /* no documentation about clk delay, for now just try to mimic
+ * original driver.
+ */
+ alcor_write8(priv, 0x20, AU6601_CLK_DELAY);
+ /* set BUS width to 1 bit */
+ alcor_write8(priv, 0, AU6601_REG_BUS_CTRL);
+ /* set CLK first time */
+ alcor_set_clock(host, ios->clock);
+ /* power on VDD */
+ alcor_write8(priv, AU6601_SD_CARD,
+ AU6601_POWER_CONTROL);
+ /* wait until the CLK will get stable */
+ mdelay(20);
+ /* set CLK again, mimic original driver. */
+ alcor_set_clock(host, ios->clock);
+
+ /* enable output */
+ alcor_write8(priv, AU6601_SD_CARD,
+ AU6601_OUTPUT_ENABLE);
+ /* The clk will not work on au6621. We need to trigger data
+ * transfer.
+ */
+ alcor_write8(priv, AU6601_DATA_WRITE,
+ AU6601_DATA_XFER_CTRL);
+ /* configure timeout. Not clear what exactly it means. */
+ alcor_write8(priv, 0x7d, AU6601_TIME_OUT_CTRL);
+ mdelay(100);
+ break;
+ default:
+ dev_err(host->dev, "Unknown power parameter\n");
+ }
+}
+
+static void alcor_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct alcor_sdmmc_host *host = mmc_priv(mmc);
+
+ mutex_lock(&host->cmd_mutex);
+
+ dev_dbg(host->dev, "set ios. bus width: %x, power mode: %x\n",
+ ios->bus_width, ios->power_mode);
+
+ if (ios->power_mode != host->cur_power_mode) {
+ alcor_set_power_mode(mmc, ios);
+ host->cur_power_mode = ios->power_mode;
+ } else {
+ alcor_set_timing(mmc, ios);
+ alcor_set_bus_width(mmc, ios);
+ alcor_set_clock(host, ios->clock);
+ }
+
+ mutex_unlock(&host->cmd_mutex);
+}
+
+static int alcor_signal_voltage_switch(struct mmc_host *mmc,
+ struct mmc_ios *ios)
+{
+ struct alcor_sdmmc_host *host = mmc_priv(mmc);
+
+ mutex_lock(&host->cmd_mutex);
+
+ switch (ios->signal_voltage) {
+ case MMC_SIGNAL_VOLTAGE_330:
+ alcor_rmw8(host, AU6601_OPT, AU6601_OPT_SD_18V, 0);
+ break;
+ case MMC_SIGNAL_VOLTAGE_180:
+ alcor_rmw8(host, AU6601_OPT, 0, AU6601_OPT_SD_18V);
+ break;
+ default:
+ /* No signal voltage switch required */
+ break;
+ }
+
+ mutex_unlock(&host->cmd_mutex);
+ return 0;
+}
+
+static const struct mmc_host_ops alcor_sdc_ops = {
+ .card_busy = alcor_card_busy,
+ .get_cd = alcor_get_cd,
+ .get_ro = alcor_get_ro,
+ .post_req = alcor_post_req,
+ .pre_req = alcor_pre_req,
+ .request = alcor_request,
+ .set_ios = alcor_set_ios,
+ .start_signal_voltage_switch = alcor_signal_voltage_switch,
+};
+
+static void alcor_timeout_timer(struct work_struct *work)
+{
+ struct delayed_work *d = to_delayed_work(work);
+ struct alcor_sdmmc_host *host = container_of(d, struct alcor_sdmmc_host,
+ timeout_work);
+ mutex_lock(&host->cmd_mutex);
+
+ dev_dbg(host->dev, "triggered timeout\n");
+ if (host->mrq) {
+ dev_err(host->dev, "Timeout waiting for hardware interrupt.\n");
+
+ if (host->data) {
+ host->data->error = -ETIMEDOUT;
+ } else {
+ if (host->cmd)
+ host->cmd->error = -ETIMEDOUT;
+ else
+ host->mrq->cmd->error = -ETIMEDOUT;
+ }
+
+ alcor_reset(host, AU6601_RESET_CMD | AU6601_RESET_DATA);
+ alcor_request_complete(host, 0);
+ }
+
+ mmiowb();
+ mutex_unlock(&host->cmd_mutex);
+}
+
+static void alcor_hw_init(struct alcor_sdmmc_host *host)
+{
+ struct alcor_pci_priv *priv = host->alcor_pci;
+ struct alcor_dev_cfg *cfg = priv->cfg;
+
+ /* FIXME: This part is a mimics HW init of original driver.
+ * If we will ever get access to documentation, then this part
+ * should be reviewed again.
+ */
+
+ /* reset command state engine */
+ alcor_reset(host, AU6601_RESET_CMD);
+
+ alcor_write8(priv, 0, AU6601_DMA_BOUNDARY);
+ /* enable sd card mode */
+ alcor_write8(priv, AU6601_SD_CARD, AU6601_ACTIVE_CTRL);
+
+ /* set BUS width to 1 bit */
+ alcor_write8(priv, 0, AU6601_REG_BUS_CTRL);
+
+ /* reset data state engine */
+ alcor_reset(host, AU6601_RESET_DATA);
+ /* Not sure if a voodoo with AU6601_DMA_BOUNDARY is really needed */
+ alcor_write8(priv, 0, AU6601_DMA_BOUNDARY);
+
+ alcor_write8(priv, 0, AU6601_INTERFACE_MODE_CTRL);
+ /* not clear what we are doing here. */
+ alcor_write8(priv, 0x44, AU6601_PAD_DRIVE0);
+ alcor_write8(priv, 0x44, AU6601_PAD_DRIVE1);
+ alcor_write8(priv, 0x00, AU6601_PAD_DRIVE2);
+
+ /* for 6601 - dma_boundary; for 6621 - dma_page_cnt
+ * exact meaning of this register is not clear.
+ */
+ alcor_write8(priv, cfg->dma, AU6601_DMA_BOUNDARY);
+
+ /* make sure all pins are set to input and VDD is off */
+ alcor_write8(priv, 0, AU6601_OUTPUT_ENABLE);
+ alcor_write8(priv, 0, AU6601_POWER_CONTROL);
+
+ alcor_write8(priv, AU6601_DETECT_EN, AU6601_DETECT_STATUS);
+ /* now we should be safe to enable IRQs */
+ alcor_unmask_sd_irqs(host);
+}
+
+static void alcor_hw_uninit(struct alcor_sdmmc_host *host)
+{
+ struct alcor_pci_priv *priv = host->alcor_pci;
+
+ alcor_mask_sd_irqs(host);
+ alcor_reset(host, AU6601_RESET_CMD | AU6601_RESET_DATA);
+
+ alcor_write8(priv, 0, AU6601_DETECT_STATUS);
+
+ alcor_write8(priv, 0, AU6601_OUTPUT_ENABLE);
+ alcor_write8(priv, 0, AU6601_POWER_CONTROL);
+
+ alcor_write8(priv, 0, AU6601_OPT);
+}
+
+static void alcor_init_mmc(struct alcor_sdmmc_host *host)
+{
+ struct mmc_host *mmc = host->mmc;
+
+ mmc->f_min = AU6601_MIN_CLOCK;
+ mmc->f_max = AU6601_MAX_CLOCK;
+ mmc->ocr_avail = MMC_VDD_33_34;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED
+ | MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50
+ | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50;
+ mmc->caps2 = MMC_CAP2_NO_SDIO;
+ mmc->ops = &alcor_sdc_ops;
+
+ /* Hardware cannot do scatter lists */
+ mmc->max_segs = AU6601_MAX_DMA_SEGMENTS;
+ mmc->max_seg_size = AU6601_MAX_DMA_BLOCK_SIZE;
+
+ mmc->max_blk_size = mmc->max_seg_size;
+ mmc->max_blk_count = mmc->max_segs;
+
+ mmc->max_req_size = mmc->max_seg_size * mmc->max_segs;
+}
+
+static int alcor_pci_sdmmc_drv_probe(struct platform_device *pdev)
+{
+ struct alcor_pci_priv *priv = pdev->dev.platform_data;
+ struct mmc_host *mmc;
+ struct alcor_sdmmc_host *host;
+ int ret;
+
+ mmc = mmc_alloc_host(sizeof(*host), &pdev->dev);
+ if (!mmc) {
+ dev_err(&pdev->dev, "Can't allocate MMC\n");
+ return -ENOMEM;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->dev = &pdev->dev;
+ host->cur_power_mode = MMC_POWER_UNDEFINED;
+ host->alcor_pci = priv;
+
+ /* make sure irqs are disabled */
+ alcor_write32(priv, 0, AU6601_REG_INT_ENABLE);
+ alcor_write32(priv, 0, AU6601_MS_INT_ENABLE);
+
+ ret = devm_request_threaded_irq(&pdev->dev, priv->irq,
+ alcor_irq, alcor_irq_thread, IRQF_SHARED,
+ DRV_NAME_ALCOR_PCI_SDMMC, host);
+
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to get irq for data line\n");
+ return ret;
+ }
+
+ mutex_init(&host->cmd_mutex);
+ INIT_DELAYED_WORK(&host->timeout_work, alcor_timeout_timer);
+
+ alcor_init_mmc(host);
+ alcor_hw_init(host);
+
+ dev_set_drvdata(&pdev->dev, host);
+ mmc_add_host(mmc);
+ return 0;
+}
+
+static int alcor_pci_sdmmc_drv_remove(struct platform_device *pdev)
+{
+ struct alcor_sdmmc_host *host = dev_get_drvdata(&pdev->dev);
+
+ if (cancel_delayed_work_sync(&host->timeout_work))
+ alcor_request_complete(host, 0);
+
+ alcor_hw_uninit(host);
+ mmc_remove_host(host->mmc);
+ mmc_free_host(host->mmc);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int alcor_pci_sdmmc_suspend(struct device *dev)
+{
+ struct alcor_sdmmc_host *host = dev_get_drvdata(dev);
+
+ if (cancel_delayed_work_sync(&host->timeout_work))
+ alcor_request_complete(host, 0);
+
+ alcor_hw_uninit(host);
+
+ return 0;
+}
+
+static int alcor_pci_sdmmc_resume(struct device *dev)
+{
+ struct alcor_sdmmc_host *host = dev_get_drvdata(dev);
+
+ alcor_hw_init(host);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(alcor_mmc_pm_ops, alcor_pci_sdmmc_suspend,
+ alcor_pci_sdmmc_resume);
+
+static const struct platform_device_id alcor_pci_sdmmc_ids[] = {
+ {
+ .name = DRV_NAME_ALCOR_PCI_SDMMC,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, alcor_pci_sdmmc_ids);
+
+static struct platform_driver alcor_pci_sdmmc_driver = {
+ .probe = alcor_pci_sdmmc_drv_probe,
+ .remove = alcor_pci_sdmmc_drv_remove,
+ .id_table = alcor_pci_sdmmc_ids,
+ .driver = {
+ .name = DRV_NAME_ALCOR_PCI_SDMMC,
+ .pm = &alcor_mmc_pm_ops
+ },
+};
+module_platform_driver(alcor_pci_sdmmc_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>");
+MODULE_DESCRIPTION("PCI driver for Alcor Micro AU6601 Secure Digital Host Controller Interface");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index be53044086c7..47189f9ed4e2 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -446,18 +446,7 @@ static int atmci_req_show(struct seq_file *s, void *v)
return 0;
}
-static int atmci_req_open(struct inode *inode, struct file *file)
-{
- return single_open(file, atmci_req_show, inode->i_private);
-}
-
-static const struct file_operations atmci_req_fops = {
- .owner = THIS_MODULE,
- .open = atmci_req_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(atmci_req);
static void atmci_show_status_reg(struct seq_file *s,
const char *regname, u32 value)
@@ -583,18 +572,7 @@ static int atmci_regs_show(struct seq_file *s, void *v)
return ret;
}
-static int atmci_regs_open(struct inode *inode, struct file *file)
-{
- return single_open(file, atmci_regs_show, inode->i_private);
-}
-
-static const struct file_operations atmci_regs_fops = {
- .owner = THIS_MODULE,
- .open = atmci_regs_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(atmci_regs);
static void atmci_init_debugfs(struct atmel_mci_slot *slot)
{
@@ -608,13 +586,14 @@ static void atmci_init_debugfs(struct atmel_mci_slot *slot)
return;
node = debugfs_create_file("regs", S_IRUSR, root, host,
- &atmci_regs_fops);
+ &atmci_regs_fops);
if (IS_ERR(node))
return;
if (!node)
goto err;
- node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops);
+ node = debugfs_create_file("req", S_IRUSR, root, slot,
+ &atmci_req_fops);
if (!node)
goto err;
@@ -1954,13 +1933,14 @@ static void atmci_tasklet_func(unsigned long priv)
}
atmci_request_end(host, host->mrq);
- state = STATE_IDLE;
+ goto unlock; /* atmci_request_end() sets host->state */
break;
}
} while (state != prev_state);
host->state = state;
+unlock:
spin_unlock(&host->lock);
}
diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
index 768972af8b85..50293529d6de 100644
--- a/drivers/mmc/host/bcm2835.c
+++ b/drivers/mmc/host/bcm2835.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* bcm2835 sdhost driver.
*
@@ -25,18 +26,6 @@
* sdhci-bcm2708.c by Broadcom
* sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko
* sdhci.c and sdhci-pci.c by Pierre Ossman
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/delay.h>
@@ -286,6 +275,7 @@ static void bcm2835_reset(struct mmc_host *mmc)
if (host->dma_chan)
dmaengine_terminate_sync(host->dma_chan);
+ host->dma_chan = NULL;
bcm2835_reset_internal(host);
}
@@ -463,7 +453,7 @@ static void bcm2835_transfer_pio(struct bcm2835_host *host)
static
void bcm2835_prepare_dma(struct bcm2835_host *host, struct mmc_data *data)
{
- int len, dir_data, dir_slave;
+ int sg_len, dir_data, dir_slave;
struct dma_async_tx_descriptor *desc = NULL;
struct dma_chan *dma_chan;
@@ -509,23 +499,24 @@ void bcm2835_prepare_dma(struct bcm2835_host *host, struct mmc_data *data)
&host->dma_cfg_rx :
&host->dma_cfg_tx);
- len = dma_map_sg(dma_chan->device->dev, data->sg, data->sg_len,
- dir_data);
+ sg_len = dma_map_sg(dma_chan->device->dev, data->sg, data->sg_len,
+ dir_data);
+ if (!sg_len)
+ return;
- if (len > 0) {
- desc = dmaengine_prep_slave_sg(dma_chan, data->sg,
- len, dir_slave,
- DMA_PREP_INTERRUPT |
- DMA_CTRL_ACK);
- }
+ desc = dmaengine_prep_slave_sg(dma_chan, data->sg, sg_len, dir_slave,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (desc) {
- desc->callback = bcm2835_dma_complete;
- desc->callback_param = host;
- host->dma_desc = desc;
- host->dma_chan = dma_chan;
- host->dma_dir = dir_data;
+ if (!desc) {
+ dma_unmap_sg(dma_chan->device->dev, data->sg, sg_len, dir_data);
+ return;
}
+
+ desc->callback = bcm2835_dma_complete;
+ desc->callback_param = host;
+ host->dma_desc = desc;
+ host->dma_chan = dma_chan;
+ host->dma_dir = dir_data;
}
static void bcm2835_start_dma(struct bcm2835_host *host)
@@ -607,7 +598,7 @@ static void bcm2835_finish_request(struct bcm2835_host *host)
struct dma_chan *terminate_chan = NULL;
struct mmc_request *mrq;
- cancel_delayed_work(&host->timeout_work);
+ cancel_delayed_work_sync(&host->timeout_work);
mrq = host->mrq;
@@ -772,6 +763,8 @@ static void bcm2835_finish_command(struct bcm2835_host *host)
if (!(sdhsts & SDHSTS_CRC7_ERROR) ||
(host->cmd->opcode != MMC_SEND_OP_COND)) {
+ u32 edm, fsm;
+
if (sdhsts & SDHSTS_CMD_TIME_OUT) {
host->cmd->error = -ETIMEDOUT;
} else {
@@ -780,6 +773,13 @@ static void bcm2835_finish_command(struct bcm2835_host *host)
bcm2835_dumpregs(host);
host->cmd->error = -EILSEQ;
}
+ edm = readl(host->ioaddr + SDEDM);
+ fsm = edm & SDEDM_FSM_MASK;
+ if (fsm == SDEDM_FSM_READWAIT ||
+ fsm == SDEDM_FSM_WRITESTART1)
+ /* Kick the FSM out of its wait */
+ writel(edm | SDEDM_FORCE_DATA_MODE,
+ host->ioaddr + SDEDM);
bcm2835_finish_request(host);
return;
}
@@ -837,6 +837,8 @@ static void bcm2835_timeout(struct work_struct *work)
dev_err(dev, "timeout waiting for hardware interrupt.\n");
bcm2835_dumpregs(host);
+ bcm2835_reset(host->mmc);
+
if (host->data) {
host->data->error = -ETIMEDOUT;
bcm2835_finish_data(host);
@@ -1052,10 +1054,12 @@ static void bcm2835_dma_complete_work(struct work_struct *work)
{
struct bcm2835_host *host =
container_of(work, struct bcm2835_host, dma_work);
- struct mmc_data *data = host->data;
+ struct mmc_data *data;
mutex_lock(&host->mutex);
+ data = host->data;
+
if (host->dma_chan) {
dma_unmap_sg(host->dma_chan->device->dev,
data->sg, data->sg_len,
@@ -1180,9 +1184,6 @@ static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq)
return;
}
- if (host->use_dma && mrq->data && (mrq->data->blocks > PIO_THRESHOLD))
- bcm2835_prepare_dma(host, mrq->data);
-
mutex_lock(&host->mutex);
WARN_ON(host->mrq);
@@ -1206,6 +1207,9 @@ static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq)
return;
}
+ if (host->use_dma && mrq->data && (mrq->data->blocks > PIO_THRESHOLD))
+ bcm2835_prepare_dma(host, mrq->data);
+
host->use_sbc = !!mrq->sbc && host->mrq->data &&
(host->mrq->data->flags & MMC_DATA_READ);
if (host->use_sbc) {
@@ -1445,6 +1449,9 @@ static int bcm2835_remove(struct platform_device *pdev)
cancel_work_sync(&host->dma_work);
cancel_delayed_work_sync(&host->timeout_work);
+ if (host->dma_chan_rxtx)
+ dma_release_channel(host->dma_chan_rxtx);
+
mmc_free_host(host->mmc);
platform_set_drvdata(pdev, NULL);
diff --git a/drivers/mmc/host/dw_mmc-bluefield.c b/drivers/mmc/host/dw_mmc-bluefield.c
index 54c3fbb4a391..ed8f2254b66a 100644
--- a/drivers/mmc/host/dw_mmc-bluefield.c
+++ b/drivers/mmc/host/dw_mmc-bluefield.c
@@ -52,16 +52,7 @@ MODULE_DEVICE_TABLE(of, dw_mci_bluefield_match);
static int dw_mci_bluefield_probe(struct platform_device *pdev)
{
- const struct dw_mci_drv_data *drv_data = NULL;
- const struct of_device_id *match;
-
- if (pdev->dev.of_node) {
- match = of_match_node(dw_mci_bluefield_match,
- pdev->dev.of_node);
- drv_data = match->data;
- }
-
- return dw_mci_pltfm_register(pdev, drv_data);
+ return dw_mci_pltfm_register(pdev, &bluefield_drv_data);
}
static struct platform_driver dw_mci_bluefield_pltfm_driver = {
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 0c1efd5100b7..33215d66afa2 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -21,7 +21,7 @@
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
@@ -126,9 +126,23 @@ enum jz4740_mmc_state {
JZ4740_MMC_STATE_DONE,
};
-struct jz4740_mmc_host_next {
- int sg_len;
- s32 cookie;
+/*
+ * The MMC core allows to prepare a mmc_request while another mmc_request
+ * is in-flight. This is used via the pre_req/post_req hooks.
+ * This driver uses the pre_req/post_req hooks to map/unmap the mmc_request.
+ * Following what other drivers do (sdhci, dw_mmc) we use the following cookie
+ * flags to keep track of the mmc_request mapping state.
+ *
+ * COOKIE_UNMAPPED: the request is not mapped.
+ * COOKIE_PREMAPPED: the request was mapped in pre_req,
+ * and should be unmapped in post_req.
+ * COOKIE_MAPPED: the request was mapped in the irq handler,
+ * and should be unmapped before mmc_request_done is called..
+ */
+enum jz4780_cookie {
+ COOKIE_UNMAPPED = 0,
+ COOKIE_PREMAPPED,
+ COOKIE_MAPPED,
};
struct jz4740_mmc_host {
@@ -136,6 +150,7 @@ struct jz4740_mmc_host {
struct platform_device *pdev;
struct jz4740_mmc_platform_data *pdata;
struct clk *clk;
+ struct gpio_desc *power;
enum jz4740_mmc_version version;
@@ -162,9 +177,7 @@ struct jz4740_mmc_host {
/* DMA support */
struct dma_chan *dma_rx;
struct dma_chan *dma_tx;
- struct jz4740_mmc_host_next next_data;
bool use_dma;
- int sg_len;
/* The DMA trigger level is 8 words, that is to say, the DMA read
* trigger is when data words in MSC_RXFIFO is >= 8 and the DMA write
@@ -226,9 +239,6 @@ static int jz4740_mmc_acquire_dma_channels(struct jz4740_mmc_host *host)
return PTR_ERR(host->dma_rx);
}
- /* Initialize DMA pre request cookie */
- host->next_data.cookie = 1;
-
return 0;
}
@@ -245,60 +255,44 @@ static void jz4740_mmc_dma_unmap(struct jz4740_mmc_host *host,
enum dma_data_direction dir = mmc_get_dma_dir(data);
dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir);
+ data->host_cookie = COOKIE_UNMAPPED;
}
-/* Prepares DMA data for current/next transfer, returns non-zero on failure */
+/* Prepares DMA data for current or next transfer.
+ * A request can be in-flight when this is called.
+ */
static int jz4740_mmc_prepare_dma_data(struct jz4740_mmc_host *host,
struct mmc_data *data,
- struct jz4740_mmc_host_next *next,
- struct dma_chan *chan)
+ int cookie)
{
- struct jz4740_mmc_host_next *next_data = &host->next_data;
+ struct dma_chan *chan = jz4740_mmc_get_dma_chan(host, data);
enum dma_data_direction dir = mmc_get_dma_dir(data);
- int sg_len;
-
- if (!next && data->host_cookie &&
- data->host_cookie != host->next_data.cookie) {
- dev_warn(mmc_dev(host->mmc),
- "[%s] invalid cookie: data->host_cookie %d host->next_data.cookie %d\n",
- __func__,
- data->host_cookie,
- host->next_data.cookie);
- data->host_cookie = 0;
- }
+ int sg_count;
- /* Check if next job is already prepared */
- if (next || data->host_cookie != host->next_data.cookie) {
- sg_len = dma_map_sg(chan->device->dev,
- data->sg,
- data->sg_len,
- dir);
+ if (data->host_cookie == COOKIE_PREMAPPED)
+ return data->sg_count;
- } else {
- sg_len = next_data->sg_len;
- next_data->sg_len = 0;
- }
+ sg_count = dma_map_sg(chan->device->dev,
+ data->sg,
+ data->sg_len,
+ dir);
- if (sg_len <= 0) {
+ if (sg_count <= 0) {
dev_err(mmc_dev(host->mmc),
"Failed to map scatterlist for DMA operation\n");
return -EINVAL;
}
- if (next) {
- next->sg_len = sg_len;
- data->host_cookie = ++next->cookie < 0 ? 1 : next->cookie;
- } else
- host->sg_len = sg_len;
+ data->sg_count = sg_count;
+ data->host_cookie = cookie;
- return 0;
+ return data->sg_count;
}
static int jz4740_mmc_start_dma_transfer(struct jz4740_mmc_host *host,
struct mmc_data *data)
{
- int ret;
- struct dma_chan *chan;
+ struct dma_chan *chan = jz4740_mmc_get_dma_chan(host, data);
struct dma_async_tx_descriptor *desc;
struct dma_slave_config conf = {
.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
@@ -306,29 +300,26 @@ static int jz4740_mmc_start_dma_transfer(struct jz4740_mmc_host *host,
.src_maxburst = JZ4740_MMC_FIFO_HALF_SIZE,
.dst_maxburst = JZ4740_MMC_FIFO_HALF_SIZE,
};
+ int sg_count;
if (data->flags & MMC_DATA_WRITE) {
conf.direction = DMA_MEM_TO_DEV;
conf.dst_addr = host->mem_res->start + JZ_REG_MMC_TXFIFO;
conf.slave_id = JZ4740_DMA_TYPE_MMC_TRANSMIT;
- chan = host->dma_tx;
} else {
conf.direction = DMA_DEV_TO_MEM;
conf.src_addr = host->mem_res->start + JZ_REG_MMC_RXFIFO;
conf.slave_id = JZ4740_DMA_TYPE_MMC_RECEIVE;
- chan = host->dma_rx;
}
- ret = jz4740_mmc_prepare_dma_data(host, data, NULL, chan);
- if (ret)
- return ret;
+ sg_count = jz4740_mmc_prepare_dma_data(host, data, COOKIE_MAPPED);
+ if (sg_count < 0)
+ return sg_count;
dmaengine_slave_config(chan, &conf);
- desc = dmaengine_prep_slave_sg(chan,
- data->sg,
- host->sg_len,
- conf.direction,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ desc = dmaengine_prep_slave_sg(chan, data->sg, sg_count,
+ conf.direction,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
dev_err(mmc_dev(host->mmc),
"Failed to allocate DMA %s descriptor",
@@ -342,7 +333,8 @@ static int jz4740_mmc_start_dma_transfer(struct jz4740_mmc_host *host,
return 0;
dma_unmap:
- jz4740_mmc_dma_unmap(host, data);
+ if (data->host_cookie == COOKIE_MAPPED)
+ jz4740_mmc_dma_unmap(host, data);
return -ENOMEM;
}
@@ -351,16 +343,13 @@ static void jz4740_mmc_pre_request(struct mmc_host *mmc,
{
struct jz4740_mmc_host *host = mmc_priv(mmc);
struct mmc_data *data = mrq->data;
- struct jz4740_mmc_host_next *next_data = &host->next_data;
- BUG_ON(data->host_cookie);
-
- if (host->use_dma) {
- struct dma_chan *chan = jz4740_mmc_get_dma_chan(host, data);
+ if (!host->use_dma)
+ return;
- if (jz4740_mmc_prepare_dma_data(host, data, next_data, chan))
- data->host_cookie = 0;
- }
+ data->host_cookie = COOKIE_UNMAPPED;
+ if (jz4740_mmc_prepare_dma_data(host, data, COOKIE_PREMAPPED) < 0)
+ data->host_cookie = COOKIE_UNMAPPED;
}
static void jz4740_mmc_post_request(struct mmc_host *mmc,
@@ -370,10 +359,8 @@ static void jz4740_mmc_post_request(struct mmc_host *mmc,
struct jz4740_mmc_host *host = mmc_priv(mmc);
struct mmc_data *data = mrq->data;
- if (host->use_dma && data->host_cookie) {
+ if (data && data->host_cookie != COOKIE_UNMAPPED)
jz4740_mmc_dma_unmap(host, data);
- data->host_cookie = 0;
- }
if (err) {
struct dma_chan *chan = jz4740_mmc_get_dma_chan(host, data);
@@ -436,10 +423,14 @@ static void jz4740_mmc_reset(struct jz4740_mmc_host *host)
static void jz4740_mmc_request_done(struct jz4740_mmc_host *host)
{
struct mmc_request *req;
+ struct mmc_data *data;
req = host->req;
+ data = req->data;
host->req = NULL;
+ if (data && data->host_cookie == COOKIE_MAPPED)
+ jz4740_mmc_dma_unmap(host, data);
mmc_request_done(host->mmc, req);
}
@@ -903,18 +894,16 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_UP:
jz4740_mmc_reset(host);
- if (host->pdata && gpio_is_valid(host->pdata->gpio_power))
- gpio_set_value(host->pdata->gpio_power,
- !host->pdata->power_active_low);
+ if (host->power)
+ gpiod_set_value(host->power, 1);
host->cmdat |= JZ_MMC_CMDAT_INIT;
clk_prepare_enable(host->clk);
break;
case MMC_POWER_ON:
break;
default:
- if (host->pdata && gpio_is_valid(host->pdata->gpio_power))
- gpio_set_value(host->pdata->gpio_power,
- host->pdata->power_active_low);
+ if (host->power)
+ gpiod_set_value(host->power, 0);
clk_disable_unprepare(host->clk);
break;
}
@@ -947,30 +936,9 @@ static const struct mmc_host_ops jz4740_mmc_ops = {
.enable_sdio_irq = jz4740_mmc_enable_sdio_irq,
};
-static int jz4740_mmc_request_gpio(struct device *dev, int gpio,
- const char *name, bool output, int value)
-{
- int ret;
-
- if (!gpio_is_valid(gpio))
- return 0;
-
- ret = gpio_request(gpio, name);
- if (ret) {
- dev_err(dev, "Failed to request %s gpio: %d\n", name, ret);
- return ret;
- }
-
- if (output)
- gpio_direction_output(gpio, value);
- else
- gpio_direction_input(gpio);
-
- return 0;
-}
-
-static int jz4740_mmc_request_gpios(struct mmc_host *mmc,
- struct platform_device *pdev)
+static int jz4740_mmc_request_gpios(struct jz4740_mmc_host *host,
+ struct mmc_host *mmc,
+ struct platform_device *pdev)
{
struct jz4740_mmc_platform_data *pdata = dev_get_platdata(&pdev->dev);
int ret = 0;
@@ -983,31 +951,21 @@ static int jz4740_mmc_request_gpios(struct mmc_host *mmc,
if (!pdata->read_only_active_low)
mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
- if (gpio_is_valid(pdata->gpio_card_detect)) {
- ret = mmc_gpio_request_cd(mmc, pdata->gpio_card_detect, 0);
- if (ret)
- return ret;
- }
-
- if (gpio_is_valid(pdata->gpio_read_only)) {
- ret = mmc_gpio_request_ro(mmc, pdata->gpio_read_only);
- if (ret)
- return ret;
- }
-
- return jz4740_mmc_request_gpio(&pdev->dev, pdata->gpio_power,
- "MMC read only", true, pdata->power_active_low);
-}
-
-static void jz4740_mmc_free_gpios(struct platform_device *pdev)
-{
- struct jz4740_mmc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ /*
+ * Get optional card detect and write protect GPIOs,
+ * only back out on probe deferral.
+ */
+ ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+ if (ret == -EPROBE_DEFER)
+ return ret;
- if (!pdata)
- return;
+ ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL);
+ if (ret == -EPROBE_DEFER)
+ return ret;
- if (gpio_is_valid(pdata->gpio_power))
- gpio_free(pdata->gpio_power);
+ host->power = devm_gpiod_get_optional(&pdev->dev, "power",
+ GPIOD_OUT_HIGH);
+ return PTR_ERR_OR_ZERO(host->power);
}
static const struct of_device_id jz4740_mmc_of_match[] = {
@@ -1053,7 +1011,7 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
mmc->caps |= MMC_CAP_SDIO_IRQ;
if (!(pdata && pdata->data_1bit))
mmc->caps |= MMC_CAP_4_BIT_DATA;
- ret = jz4740_mmc_request_gpios(mmc, pdev);
+ ret = jz4740_mmc_request_gpios(host, mmc, pdev);
if (ret)
goto err_free_host;
}
@@ -1104,7 +1062,7 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
dev_name(&pdev->dev), host);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
- goto err_free_gpios;
+ goto err_free_host;
}
jz4740_mmc_clock_disable(host);
@@ -1135,8 +1093,6 @@ err_release_dma:
jz4740_mmc_release_dma_channels(host);
err_free_irq:
free_irq(host->irq, host);
-err_free_gpios:
- jz4740_mmc_free_gpios(pdev);
err_free_host:
mmc_free_host(mmc);
@@ -1155,8 +1111,6 @@ static int jz4740_mmc_remove(struct platform_device *pdev)
free_irq(host->irq, host);
- jz4740_mmc_free_gpios(pdev);
-
if (host->use_dma)
jz4740_mmc_release_dma_channels(host);
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index c201c378537e..c2690c1a50ff 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -21,11 +21,11 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
-#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
@@ -66,6 +66,9 @@
#define SD_EMMC_DELAY 0x4
#define SD_EMMC_ADJUST 0x8
+#define ADJUST_ADJ_DELAY_MASK GENMASK(21, 16)
+#define ADJUST_DS_EN BIT(15)
+#define ADJUST_ADJ_EN BIT(13)
#define SD_EMMC_DELAY1 0x4
#define SD_EMMC_DELAY2 0x8
@@ -90,9 +93,11 @@
#define CFG_CLK_ALWAYS_ON BIT(18)
#define CFG_CHK_DS BIT(20)
#define CFG_AUTO_CLK BIT(23)
+#define CFG_ERR_ABORT BIT(27)
#define SD_EMMC_STATUS 0x48
#define STATUS_BUSY BIT(31)
+#define STATUS_DESC_BUSY BIT(30)
#define STATUS_DATI GENMASK(23, 16)
#define SD_EMMC_IRQ_EN 0x4c
@@ -141,6 +146,7 @@ struct meson_mmc_data {
unsigned int tx_delay_mask;
unsigned int rx_delay_mask;
unsigned int always_on;
+ unsigned int adjust;
};
struct sd_emmc_desc {
@@ -156,7 +162,6 @@ struct meson_host {
struct mmc_host *mmc;
struct mmc_command *cmd;
- spinlock_t lock;
void __iomem *regs;
struct clk *core_clk;
struct clk *mmc_clk;
@@ -633,14 +638,8 @@ static int meson_mmc_clk_init(struct meson_host *host)
if (ret)
return ret;
- /*
- * Set phases : These values are mostly the datasheet recommended ones
- * except for the Tx phase. Datasheet recommends 180 but some cards
- * fail at initialisation with it. 270 works just fine, it fixes these
- * initialisation issues and enable eMMC DDR52 mode.
- */
clk_set_phase(host->mmc_clk, 180);
- clk_set_phase(host->tx_clk, 270);
+ clk_set_phase(host->tx_clk, 0);
clk_set_phase(host->rx_clk, 0);
return clk_prepare_enable(host->mmc_clk);
@@ -928,6 +927,7 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
+ cmd_cfg |= CMD_CFG_ERROR; /* stop in case of error */
meson_mmc_set_response_bits(cmd, &cmd_cfg);
@@ -1022,29 +1022,34 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
u32 irq_en, status, raw_status;
irqreturn_t ret = IRQ_NONE;
- if (WARN_ON(!host) || WARN_ON(!host->cmd))
+ irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
+ raw_status = readl(host->regs + SD_EMMC_STATUS);
+ status = raw_status & irq_en;
+
+ if (!status) {
+ dev_dbg(host->dev,
+ "Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
+ irq_en, raw_status);
return IRQ_NONE;
+ }
- spin_lock(&host->lock);
+ if (WARN_ON(!host) || WARN_ON(!host->cmd))
+ return IRQ_NONE;
cmd = host->cmd;
data = cmd->data;
- irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
- raw_status = readl(host->regs + SD_EMMC_STATUS);
- status = raw_status & irq_en;
-
cmd->error = 0;
if (status & IRQ_CRC_ERR) {
dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status);
cmd->error = -EILSEQ;
- ret = IRQ_HANDLED;
+ ret = IRQ_WAKE_THREAD;
goto out;
}
if (status & IRQ_TIMEOUTS) {
dev_dbg(host->dev, "Timeout - status 0x%08x\n", status);
cmd->error = -ETIMEDOUT;
- ret = IRQ_HANDLED;
+ ret = IRQ_WAKE_THREAD;
goto out;
}
@@ -1069,17 +1074,48 @@ out:
/* ack all enabled interrupts */
writel(irq_en, host->regs + SD_EMMC_STATUS);
+ if (cmd->error) {
+ /* Stop desc in case of errors */
+ u32 start = readl(host->regs + SD_EMMC_START);
+
+ start &= ~START_DESC_BUSY;
+ writel(start, host->regs + SD_EMMC_START);
+ }
+
if (ret == IRQ_HANDLED)
meson_mmc_request_done(host->mmc, cmd->mrq);
- else if (ret == IRQ_NONE)
- dev_warn(host->dev,
- "Unexpected IRQ! status=0x%08x, irq_en=0x%08x\n",
- raw_status, irq_en);
- spin_unlock(&host->lock);
return ret;
}
+static int meson_mmc_wait_desc_stop(struct meson_host *host)
+{
+ int loop;
+ u32 status;
+
+ /*
+ * It may sometimes take a while for it to actually halt. Here, we
+ * are giving it 5ms to comply
+ *
+ * If we don't confirm the descriptor is stopped, it might raise new
+ * IRQs after we have called mmc_request_done() which is bad.
+ */
+ for (loop = 50; loop; loop--) {
+ status = readl(host->regs + SD_EMMC_STATUS);
+ if (status & (STATUS_BUSY | STATUS_DESC_BUSY))
+ udelay(100);
+ else
+ break;
+ }
+
+ if (status & (STATUS_BUSY | STATUS_DESC_BUSY)) {
+ dev_err(host->dev, "Timed out waiting for host to stop\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
{
struct meson_host *host = dev_id;
@@ -1090,6 +1126,13 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
if (WARN_ON(!cmd))
return IRQ_NONE;
+ if (cmd->error) {
+ meson_mmc_wait_desc_stop(host);
+ meson_mmc_request_done(host->mmc, cmd->mrq);
+
+ return IRQ_HANDLED;
+ }
+
data = cmd->data;
if (meson_mmc_bounce_buf_read(data)) {
xfer_bytes = data->blksz * data->blocks;
@@ -1123,14 +1166,21 @@ static int meson_mmc_get_cd(struct mmc_host *mmc)
static void meson_mmc_cfg_init(struct meson_host *host)
{
- u32 cfg = 0;
+ u32 cfg = 0, adj = 0;
cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK,
ilog2(SD_EMMC_CFG_RESP_TIMEOUT));
cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP));
cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE));
+ /* abort chain on R/W errors */
+ cfg |= CFG_ERR_ABORT;
+
writel(cfg, host->regs + SD_EMMC_CFG);
+
+ /* enable signal resampling w/o delay */
+ adj = ADJUST_ADJ_EN;
+ writel(adj, host->regs + host->data->adjust);
}
static int meson_mmc_card_busy(struct mmc_host *mmc)
@@ -1191,8 +1241,6 @@ static int meson_mmc_probe(struct platform_device *pdev)
host->dev = &pdev->dev;
dev_set_drvdata(&pdev->dev, host);
- spin_lock_init(&host->lock);
-
/* Get regulators and the supported OCR mask */
host->vqmmc_enabled = false;
ret = mmc_regulator_get_supply(mmc);
@@ -1356,12 +1404,14 @@ static const struct meson_mmc_data meson_gx_data = {
.tx_delay_mask = CLK_V2_TX_DELAY_MASK,
.rx_delay_mask = CLK_V2_RX_DELAY_MASK,
.always_on = CLK_V2_ALWAYS_ON,
+ .adjust = SD_EMMC_ADJUST,
};
static const struct meson_mmc_data meson_axg_data = {
.tx_delay_mask = CLK_V3_TX_DELAY_MASK,
.rx_delay_mask = CLK_V3_RX_DELAY_MASK,
.always_on = CLK_V3_ALWAYS_ON,
+ .adjust = SD_EMMC_V3_ADJUST,
};
static const struct of_device_id meson_mmc_of_match[] = {
diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c
index abe253c262a2..ec980bda071c 100644
--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -596,6 +596,9 @@ static int meson_mx_mmc_register_clks(struct meson_mx_mmc_host *host)
init.name = devm_kasprintf(host->controller_dev, GFP_KERNEL,
"%s#fixed_factor",
dev_name(host->controller_dev));
+ if (!init.name)
+ return -ENOMEM;
+
init.ops = &clk_fixed_factor_ops;
init.flags = 0;
init.parent_names = &clk_fixed_factor_parent;
@@ -612,6 +615,9 @@ static int meson_mx_mmc_register_clks(struct meson_mx_mmc_host *host)
clk_div_parent = __clk_get_name(host->fixed_factor_clk);
init.name = devm_kasprintf(host->controller_dev, GFP_KERNEL,
"%s#div", dev_name(host->controller_dev));
+ if (!init.name)
+ return -ENOMEM;
+
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
init.parent_names = &clk_div_parent;
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 476e53d30128..10ba46b728e8 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1434,13 +1434,16 @@ static int mmc_spi_probe(struct spi_device *spi)
if (status != 0)
goto fail_add_host;
- if (host->pdata && host->pdata->flags & MMC_SPI_USE_CD_GPIO) {
- status = mmc_gpio_request_cd(mmc, host->pdata->cd_gpio,
- host->pdata->cd_debounce);
- if (status != 0)
- goto fail_add_host;
-
- /* The platform has a CD GPIO signal that may support
+ /*
+ * Index 0 is card detect
+ * Old boardfiles were specifying 1 ms as debounce
+ */
+ status = mmc_gpiod_request_cd(mmc, NULL, 0, false, 1, NULL);
+ if (status == -EPROBE_DEFER)
+ goto fail_add_host;
+ if (!status) {
+ /*
+ * The platform has a CD GPIO signal that may support
* interrupts, so let mmc_gpiod_request_cd_irq() decide
* if polling is needed or not.
*/
@@ -1448,12 +1451,12 @@ static int mmc_spi_probe(struct spi_device *spi)
mmc_gpiod_request_cd_irq(mmc);
}
- if (host->pdata && host->pdata->flags & MMC_SPI_USE_RO_GPIO) {
+ /* Index 1 is write protect/read only */
+ status = mmc_gpiod_request_ro(mmc, NULL, 1, false, 0, NULL);
+ if (status == -EPROBE_DEFER)
+ goto fail_add_host;
+ if (!status)
has_ro = true;
- status = mmc_gpio_request_ro(mmc, host->pdata->ro_gpio);
- if (status != 0)
- goto fail_add_host;
- }
dev_info(&spi->dev, "SD/MMC host %s%s%s%s%s\n",
dev_name(&mmc->class_dev),
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 82bab35fff41..e352f5ad5801 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -21,6 +21,7 @@
#include <linux/err.h>
#include <linux/highmem.h>
#include <linux/log2.h>
+#include <linux/mmc/mmc.h>
#include <linux/mmc/pm.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
@@ -274,6 +275,7 @@ static struct variant_data variant_stm32_sdmmc = {
.cmdreg_lrsp_crc = MCI_CPSM_STM32_LRSP_CRC,
.cmdreg_srsp_crc = MCI_CPSM_STM32_SRSP_CRC,
.cmdreg_srsp = MCI_CPSM_STM32_SRSP,
+ .cmdreg_stop = MCI_CPSM_STM32_CMDSTOP,
.data_cmd_enable = MCI_CPSM_STM32_CMDTRANS,
.irq_pio_mask = MCI_IRQ_PIO_STM32_MASK,
.datactrl_first = true,
@@ -1100,6 +1102,10 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
mmci_reg_delay(host);
}
+ if (host->variant->cmdreg_stop &&
+ cmd->opcode == MMC_STOP_TRANSMISSION)
+ c |= host->variant->cmdreg_stop;
+
c |= cmd->opcode | host->variant->cmdreg_cpsm_enable;
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136)
@@ -1190,11 +1196,10 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
/* The error clause is handled above, success! */
data->bytes_xfered = data->blksz * data->blocks;
- if (!data->stop || host->mrq->sbc) {
+ if (!data->stop || (host->mrq->sbc && !data->error))
mmci_request_end(host, data->mrq);
- } else {
+ else
mmci_start_command(host, data->stop, 0);
- }
}
}
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 550dd3914461..24229097d05c 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -264,6 +264,7 @@ struct mmci_host;
* @cmdreg_lrsp_crc: enable value for long response with crc
* @cmdreg_srsp_crc: enable value for short response with crc
* @cmdreg_srsp: enable value for short response without crc
+ * @cmdreg_stop: enable value for stop and abort transmission
* @datalength_bits: number of bits in the MMCIDATALENGTH register
* @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY
* is asserted (likewise for RX)
@@ -316,6 +317,7 @@ struct variant_data {
unsigned int cmdreg_lrsp_crc;
unsigned int cmdreg_srsp_crc;
unsigned int cmdreg_srsp;
+ unsigned int cmdreg_stop;
unsigned int datalength_bits;
unsigned int fifosize;
unsigned int fifohalfsize;
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 6334cc752d8b..8afeaf81ae66 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1114,6 +1114,7 @@ static void msdc_start_command(struct msdc_host *host,
struct mmc_request *mrq, struct mmc_command *cmd)
{
u32 rawcmd;
+ unsigned long flags;
WARN_ON(host->cmd);
host->cmd = cmd;
@@ -1131,7 +1132,10 @@ static void msdc_start_command(struct msdc_host *host,
cmd->error = 0;
rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd);
+ spin_lock_irqsave(&host->lock, flags);
sdr_set_bits(host->base + MSDC_INTEN, cmd_ints_mask);
+ spin_unlock_irqrestore(&host->lock, flags);
+
writel(cmd->arg, host->base + SDC_ARG);
writel(rawcmd, host->base + SDC_CMD);
}
@@ -1351,6 +1355,31 @@ static void msdc_request_timeout(struct work_struct *work)
}
}
+static void __msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
+{
+ unsigned long flags;
+ struct msdc_host *host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (enb)
+ sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
+ else
+ sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+
+ __msdc_enable_sdio_irq(mmc, enb);
+
+ if (enb)
+ pm_runtime_get_noresume(host->dev);
+ else
+ pm_runtime_put_noidle(host->dev);
+}
+
static irqreturn_t msdc_irq(int irq, void *dev_id)
{
struct msdc_host *host = (struct msdc_host *) dev_id;
@@ -1373,7 +1402,12 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
data = host->data;
spin_unlock_irqrestore(&host->lock, flags);
- if (!(events & event_mask))
+ if ((events & event_mask) & MSDC_INT_SDIOIRQ) {
+ __msdc_enable_sdio_irq(host->mmc, 0);
+ sdio_signal_irq(host->mmc);
+ }
+
+ if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
break;
if (!mrq) {
@@ -1493,8 +1527,11 @@ static void msdc_init_hw(struct msdc_host *host)
*/
sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIO);
- /* disable detect SDIO device interrupt function */
- sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+ /* Config SDIO device detect interrupt function */
+ if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
+ sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+ else
+ sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
/* Configure to default data timeout */
sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
@@ -2013,6 +2050,11 @@ static void msdc_hw_reset(struct mmc_host *mmc)
sdr_clr_bits(host->base + EMMC_IOCON, 1);
}
+static void msdc_ack_sdio_irq(struct mmc_host *mmc)
+{
+ __msdc_enable_sdio_irq(mmc, 1);
+}
+
static const struct mmc_host_ops mt_msdc_ops = {
.post_req = msdc_post_req,
.pre_req = msdc_pre_req,
@@ -2020,6 +2062,8 @@ static const struct mmc_host_ops mt_msdc_ops = {
.set_ios = msdc_ops_set_ios,
.get_ro = mmc_gpio_get_ro,
.get_cd = mmc_gpio_get_cd,
+ .enable_sdio_irq = msdc_enable_sdio_irq,
+ .ack_sdio_irq = msdc_ack_sdio_irq,
.start_signal_voltage_switch = msdc_ops_switch_volt,
.card_busy = msdc_card_busy,
.execute_tuning = msdc_execute_tuning,
@@ -2147,6 +2191,9 @@ static int msdc_drv_probe(struct platform_device *pdev)
else
mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095);
+ if (mmc->caps & MMC_CAP_SDIO_IRQ)
+ mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
+
mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
/* MMC core transfer sizes tunable parameters */
mmc->max_segs = MAX_BD_NUM;
diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c
index c9eed8436b6b..b294b221f225 100644
--- a/drivers/mmc/host/of_mmc_spi.c
+++ b/drivers/mmc/host/of_mmc_spi.c
@@ -16,9 +16,7 @@
#include <linux/device.h>
#include <linux/slab.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/spi/spi.h>
#include <linux/spi/mmc_spi.h>
@@ -32,15 +30,7 @@
MODULE_LICENSE("GPL");
-enum {
- CD_GPIO = 0,
- WP_GPIO,
- NUM_GPIOS,
-};
-
struct of_mmc_spi {
- int gpios[NUM_GPIOS];
- bool alow_gpios[NUM_GPIOS];
int detect_irq;
struct mmc_spi_platform_data pdata;
};
@@ -102,30 +92,6 @@ struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi)
oms->pdata.ocr_mask |= mask;
}
- for (i = 0; i < ARRAY_SIZE(oms->gpios); i++) {
- enum of_gpio_flags gpio_flags;
-
- oms->gpios[i] = of_get_gpio_flags(np, i, &gpio_flags);
- if (!gpio_is_valid(oms->gpios[i]))
- continue;
-
- if (gpio_flags & OF_GPIO_ACTIVE_LOW)
- oms->alow_gpios[i] = true;
- }
-
- if (gpio_is_valid(oms->gpios[CD_GPIO])) {
- oms->pdata.cd_gpio = oms->gpios[CD_GPIO];
- oms->pdata.flags |= MMC_SPI_USE_CD_GPIO;
- if (!oms->alow_gpios[CD_GPIO])
- oms->pdata.caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
- }
- if (gpio_is_valid(oms->gpios[WP_GPIO])) {
- oms->pdata.ro_gpio = oms->gpios[WP_GPIO];
- oms->pdata.flags |= MMC_SPI_USE_RO_GPIO;
- if (!oms->alow_gpios[WP_GPIO])
- oms->pdata.caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
- }
-
oms->detect_irq = irq_of_parse_and_map(np, 0);
if (oms->detect_irq != 0) {
oms->pdata.init = of_mmc_spi_init;
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 3f4ea8f624be..29a1ddaa7466 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1652,7 +1652,7 @@ static struct mmc_host_ops omap_hsmmc_ops = {
#ifdef CONFIG_DEBUG_FS
-static int omap_hsmmc_regs_show(struct seq_file *s, void *data)
+static int mmc_regs_show(struct seq_file *s, void *data)
{
struct mmc_host *mmc = s->private;
struct omap_hsmmc_host *host = mmc_priv(mmc);
@@ -1691,17 +1691,7 @@ static int omap_hsmmc_regs_show(struct seq_file *s, void *data)
return 0;
}
-static int omap_hsmmc_regs_open(struct inode *inode, struct file *file)
-{
- return single_open(file, omap_hsmmc_regs_show, inode->i_private);
-}
-
-static const struct file_operations mmc_regs_fops = {
- .open = omap_hsmmc_regs_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(mmc_regs);
static void omap_hsmmc_debugfs(struct mmc_host *mmc)
{
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index f7ffbf1676b1..8779bbaa6b69 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -30,10 +30,9 @@
#include <linux/mmc/slot-gpio.h>
#include <linux/io.h>
#include <linux/regulator/consumer.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/gfp.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_device.h>
#include <asm/sizes.h>
@@ -63,6 +62,8 @@ struct pxamci_host {
unsigned int imask;
unsigned int power_mode;
unsigned long detect_delay_ms;
+ bool use_ro_gpio;
+ struct gpio_desc *power;
struct pxamci_platform_data *pdata;
struct mmc_request *mrq;
@@ -101,16 +102,13 @@ static inline int pxamci_set_power(struct pxamci_host *host,
{
struct mmc_host *mmc = host->mmc;
struct regulator *supply = mmc->supply.vmmc;
- int on;
if (!IS_ERR(supply))
return mmc_regulator_set_ocr(mmc, supply, vdd);
- if (host->pdata &&
- gpio_is_valid(host->pdata->gpio_power)) {
- on = ((1 << vdd) & host->pdata->ocr_mask);
- gpio_set_value(host->pdata->gpio_power,
- !!on ^ host->pdata->gpio_power_invert);
+ if (host->power) {
+ bool on = !!((1 << vdd) & host->pdata->ocr_mask);
+ gpiod_set_value(host->power, on);
}
if (host->pdata && host->pdata->setpower)
@@ -432,7 +430,7 @@ static int pxamci_get_ro(struct mmc_host *mmc)
{
struct pxamci_host *host = mmc_priv(mmc);
- if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro))
+ if (host->use_ro_gpio)
return mmc_gpio_get_ro(mmc);
if (host->pdata && host->pdata->get_ro)
return !!host->pdata->get_ro(mmc_dev(mmc));
@@ -730,52 +728,38 @@ static int pxamci_probe(struct platform_device *pdev)
}
if (host->pdata) {
- int gpio_cd = host->pdata->gpio_card_detect;
- int gpio_ro = host->pdata->gpio_card_ro;
- int gpio_power = host->pdata->gpio_power;
-
host->detect_delay_ms = host->pdata->detect_delay_ms;
- if (gpio_is_valid(gpio_power)) {
- ret = devm_gpio_request(dev, gpio_power,
- "mmc card power");
- if (ret) {
- dev_err(dev,
- "Failed requesting gpio_power %d\n",
- gpio_power);
- goto out;
- }
- gpio_direction_output(gpio_power,
- host->pdata->gpio_power_invert);
+ host->power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW);
+ if (IS_ERR(host->power)) {
+ dev_err(dev, "Failed requesting gpio_power\n");
+ goto out;
}
- if (gpio_is_valid(gpio_ro)) {
- ret = mmc_gpio_request_ro(mmc, gpio_ro);
- if (ret) {
- dev_err(dev,
- "Failed requesting gpio_ro %d\n",
- gpio_ro);
- goto out;
- } else {
- mmc->caps2 |= host->pdata->gpio_card_ro_invert ?
- 0 : MMC_CAP2_RO_ACTIVE_HIGH;
- }
+ /* FIXME: should we pass detection delay to debounce? */
+ ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+ if (ret && ret != -ENOENT) {
+ dev_err(dev, "Failed requesting gpio_cd\n");
+ goto out;
}
- if (gpio_is_valid(gpio_cd))
- ret = mmc_gpio_request_cd(mmc, gpio_cd, 0);
- if (ret) {
- dev_err(dev, "Failed requesting gpio_cd %d\n",
- gpio_cd);
+ ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL);
+ if (ret && ret != -ENOENT) {
+ dev_err(dev, "Failed requesting gpio_ro\n");
goto out;
}
+ if (!ret) {
+ host->use_ro_gpio = true;
+ mmc->caps2 |= host->pdata->gpio_card_ro_invert ?
+ 0 : MMC_CAP2_RO_ACTIVE_HIGH;
+ }
if (host->pdata->init)
host->pdata->init(dev, pxamci_detect_irq, mmc);
- if (gpio_is_valid(gpio_power) && host->pdata->setpower)
+ if (host->power && host->pdata->setpower)
dev_warn(dev, "gpio_power and setpower() both defined\n");
- if (gpio_is_valid(gpio_ro) && host->pdata->get_ro)
+ if (host->use_ro_gpio && host->pdata->get_ro)
dev_warn(dev, "gpio_ro and get_ro() both defined\n");
}
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index d3ac43c3d0b6..31a351a20dc0 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -32,6 +32,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/pinctrl-state.h>
#include <linux/regulator/consumer.h>
+#include <linux/sys_soc.h>
#include "renesas_sdhi.h"
#include "tmio_mmc.h"
@@ -45,6 +46,11 @@
#define SDHI_VER_GEN3_SD 0xcc10
#define SDHI_VER_GEN3_SDMMC 0xcd10
+struct renesas_sdhi_quirks {
+ bool hs400_disabled;
+ bool hs400_4taps;
+};
+
static void renesas_sdhi_sdbuf_width(struct tmio_mmc_host *host, int width)
{
u32 val;
@@ -163,15 +169,6 @@ static void renesas_sdhi_set_clock(struct tmio_mmc_host *host,
if (new_clock == 0)
goto out;
- /*
- * Both HS400 and HS200/SD104 set 200MHz, but some devices need to
- * set 400MHz to distinguish the CPG settings in HS400.
- */
- if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 &&
- host->pdata->flags & TMIO_MMC_HAVE_4TAP_HS400 &&
- new_clock == 200000000)
- new_clock = 400000000;
-
clock = renesas_sdhi_clk_update(host, new_clock) / 512;
for (clk = 0x80000080; new_clock >= (clock << 1); clk >>= 1)
@@ -532,6 +529,10 @@ static void renesas_sdhi_hw_reset(struct tmio_mmc_host *host)
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
+
+ if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
+ sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK,
+ TMIO_MASK_INIT_RCAR2);
}
static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host, u32 bit)
@@ -602,11 +603,31 @@ static void renesas_sdhi_enable_dma(struct tmio_mmc_host *host, bool enable)
renesas_sdhi_sdbuf_width(host, enable ? width : 16);
}
+static const struct renesas_sdhi_quirks sdhi_quirks_h3_m3w_es1 = {
+ .hs400_disabled = true,
+ .hs400_4taps = true,
+};
+
+static const struct renesas_sdhi_quirks sdhi_quirks_h3_es2 = {
+ .hs400_disabled = false,
+ .hs400_4taps = true,
+};
+
+static const struct soc_device_attribute sdhi_quirks_match[] = {
+ { .soc_id = "r8a7795", .revision = "ES1.*", .data = &sdhi_quirks_h3_m3w_es1 },
+ { .soc_id = "r8a7795", .revision = "ES2.0", .data = &sdhi_quirks_h3_es2 },
+ { .soc_id = "r8a7796", .revision = "ES1.0", .data = &sdhi_quirks_h3_m3w_es1 },
+ { .soc_id = "r8a7796", .revision = "ES1.1", .data = &sdhi_quirks_h3_m3w_es1 },
+ { /* Sentinel. */ },
+};
+
int renesas_sdhi_probe(struct platform_device *pdev,
const struct tmio_mmc_dma_ops *dma_ops)
{
struct tmio_mmc_data *mmd = pdev->dev.platform_data;
+ const struct renesas_sdhi_quirks *quirks = NULL;
const struct renesas_sdhi_of_data *of_data;
+ const struct soc_device_attribute *attr;
struct tmio_mmc_data *mmc_data;
struct tmio_mmc_dma *dma_priv;
struct tmio_mmc_host *host;
@@ -616,6 +637,10 @@ int renesas_sdhi_probe(struct platform_device *pdev,
of_data = of_device_get_match_data(&pdev->dev);
+ attr = soc_device_match(sdhi_quirks_match);
+ if (attr)
+ quirks = attr->data;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -EINVAL;
@@ -681,6 +706,12 @@ int renesas_sdhi_probe(struct platform_device *pdev,
host->multi_io_quirk = renesas_sdhi_multi_io_quirk;
host->dma_ops = dma_ops;
+ if (quirks && quirks->hs400_disabled)
+ host->mmc->caps2 &= ~(MMC_CAP2_HS400 | MMC_CAP2_HS400_ES);
+
+ if (quirks && quirks->hs400_4taps)
+ mmc_data->flags |= TMIO_MMC_HAVE_4TAP_HS400;
+
/* For some SoC, we disable internal WP. GPIO may override this */
if (mmc_can_gpio_ro(host->mmc))
mmc_data->capabilities2 &= ~MMC_CAP2_NO_WRITE_PROTECT;
@@ -691,6 +722,7 @@ int renesas_sdhi_probe(struct platform_device *pdev,
host->ops.card_busy = renesas_sdhi_card_busy;
host->ops.start_signal_voltage_switch =
renesas_sdhi_start_signal_voltage_switch;
+ host->sdcard_irq_setbit_mask = TMIO_STAT_ALWAYS_SET_27;
}
/* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */
diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
index b6f54102bfdd..92c9b15252da 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -34,7 +34,7 @@
#define DTRAN_MODE_CH_NUM_CH0 0 /* "downstream" = for write commands */
#define DTRAN_MODE_CH_NUM_CH1 BIT(16) /* "upstream" = for read commands */
#define DTRAN_MODE_BUS_WIDTH (BIT(5) | BIT(4))
-#define DTRAN_MODE_ADDR_MODE BIT(0) /* 1 = Increment address */
+#define DTRAN_MODE_ADDR_MODE BIT(0) /* 1 = Increment address, 0 = Fixed */
/* DM_CM_DTRAN_CTRL */
#define DTRAN_CTRL_DM_START BIT(0)
@@ -73,6 +73,9 @@ static unsigned long global_flags;
#define SDHI_INTERNAL_DMAC_ONE_RX_ONLY 0
#define SDHI_INTERNAL_DMAC_RX_IN_USE 1
+/* RZ/A2 does not have the ADRR_MODE bit */
+#define SDHI_INTERNAL_DMAC_ADDR_MODE_FIXED_ONLY 2
+
/* Definitions for sampling clocks */
static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = {
{
@@ -81,15 +84,14 @@ static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = {
},
};
-static const struct renesas_sdhi_of_data of_rcar_r8a7795_compatible = {
+static const struct renesas_sdhi_of_data of_rza2_compatible = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL |
- TMIO_MMC_HAVE_CBSY | TMIO_MMC_MIN_RCAR2 |
- TMIO_MMC_HAVE_4TAP_HS400,
+ TMIO_MMC_HAVE_CBSY,
+ .tmio_ocr_mask = MMC_VDD_32_33,
.capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_CMD23,
- .capabilities2 = MMC_CAP2_NO_WRITE_PROTECT,
.bus_shift = 2,
- .scc_offset = 0x1000,
+ .scc_offset = 0 - 0x1000,
.taps = rcar_gen3_scc_taps,
.taps_num = ARRAY_SIZE(rcar_gen3_scc_taps),
/* DMAC can handle 0xffffffff blk count but only 1 segment */
@@ -113,9 +115,10 @@ static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = {
};
static const struct of_device_id renesas_sdhi_internal_dmac_of_match[] = {
+ { .compatible = "renesas,sdhi-r7s9210", .data = &of_rza2_compatible, },
{ .compatible = "renesas,sdhi-mmc-r8a77470", .data = &of_rcar_gen3_compatible, },
- { .compatible = "renesas,sdhi-r8a7795", .data = &of_rcar_r8a7795_compatible, },
- { .compatible = "renesas,sdhi-r8a7796", .data = &of_rcar_r8a7795_compatible, },
+ { .compatible = "renesas,sdhi-r8a7795", .data = &of_rcar_gen3_compatible, },
+ { .compatible = "renesas,sdhi-r8a7796", .data = &of_rcar_gen3_compatible, },
{ .compatible = "renesas,rcar-gen3-sdhi", .data = &of_rcar_gen3_compatible, },
{},
};
@@ -172,7 +175,10 @@ renesas_sdhi_internal_dmac_start_dma(struct tmio_mmc_host *host,
struct mmc_data *data)
{
struct scatterlist *sg = host->sg_ptr;
- u32 dtran_mode = DTRAN_MODE_BUS_WIDTH | DTRAN_MODE_ADDR_MODE;
+ u32 dtran_mode = DTRAN_MODE_BUS_WIDTH;
+
+ if (!test_bit(SDHI_INTERNAL_DMAC_ADDR_MODE_FIXED_ONLY, &global_flags))
+ dtran_mode |= DTRAN_MODE_ADDR_MODE;
if (!dma_map_sg(&host->pdev->dev, sg, host->sg_len,
mmc_get_dma_dir(data)))
@@ -292,18 +298,22 @@ static const struct tmio_mmc_dma_ops renesas_sdhi_internal_dmac_dma_ops = {
*/
static const struct soc_device_attribute soc_whitelist[] = {
/* specific ones */
+ { .soc_id = "r7s9210",
+ .data = (void *)BIT(SDHI_INTERNAL_DMAC_ADDR_MODE_FIXED_ONLY) },
{ .soc_id = "r8a7795", .revision = "ES1.*",
.data = (void *)BIT(SDHI_INTERNAL_DMAC_ONE_RX_ONLY) },
{ .soc_id = "r8a7796", .revision = "ES1.0",
.data = (void *)BIT(SDHI_INTERNAL_DMAC_ONE_RX_ONLY) },
/* generic ones */
{ .soc_id = "r8a774a1" },
+ { .soc_id = "r8a774c0" },
{ .soc_id = "r8a77470" },
{ .soc_id = "r8a7795" },
{ .soc_id = "r8a7796" },
{ .soc_id = "r8a77965" },
{ .soc_id = "r8a77970" },
{ .soc_id = "r8a77980" },
+ { .soc_id = "r8a77990" },
{ .soc_id = "r8a77995" },
{ /* sentinel */ }
};
diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
index 1a4016f635d3..8471160316e0 100644
--- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
@@ -75,19 +75,6 @@ static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = {
},
};
-static const struct renesas_sdhi_of_data of_rcar_r8a7795_compatible = {
- .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL |
- TMIO_MMC_HAVE_CBSY | TMIO_MMC_MIN_RCAR2 |
- TMIO_MMC_HAVE_4TAP_HS400,
- .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
- MMC_CAP_CMD23,
- .capabilities2 = MMC_CAP2_NO_WRITE_PROTECT,
- .bus_shift = 2,
- .scc_offset = 0x1000,
- .taps = rcar_gen3_scc_taps,
- .taps_num = ARRAY_SIZE(rcar_gen3_scc_taps),
-};
-
static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_CLK_ACTUAL |
TMIO_MMC_HAVE_CBSY | TMIO_MMC_MIN_RCAR2,
@@ -114,8 +101,8 @@ static const struct of_device_id renesas_sdhi_sys_dmac_of_match[] = {
{ .compatible = "renesas,sdhi-r8a7792", .data = &of_rcar_gen2_compatible, },
{ .compatible = "renesas,sdhi-r8a7793", .data = &of_rcar_gen2_compatible, },
{ .compatible = "renesas,sdhi-r8a7794", .data = &of_rcar_gen2_compatible, },
- { .compatible = "renesas,sdhi-r8a7795", .data = &of_rcar_r8a7795_compatible, },
- { .compatible = "renesas,sdhi-r8a7796", .data = &of_rcar_r8a7795_compatible, },
+ { .compatible = "renesas,sdhi-r8a7795", .data = &of_rcar_gen3_compatible, },
+ { .compatible = "renesas,sdhi-r8a7796", .data = &of_rcar_gen3_compatible, },
{ .compatible = "renesas,rcar-gen1-sdhi", .data = &of_rcar_gen1_compatible, },
{ .compatible = "renesas,rcar-gen2-sdhi", .data = &of_rcar_gen2_compatible, },
{ .compatible = "renesas,rcar-gen3-sdhi", .data = &of_rcar_gen3_compatible, },
@@ -493,8 +480,7 @@ static const struct soc_device_attribute gen3_soc_whitelist[] = {
static int renesas_sdhi_sys_dmac_probe(struct platform_device *pdev)
{
- if ((of_device_get_match_data(&pdev->dev) == &of_rcar_gen3_compatible ||
- of_device_get_match_data(&pdev->dev) == &of_rcar_r8a7795_compatible) &&
+ if (of_device_get_match_data(&pdev->dev) == &of_rcar_gen3_compatible &&
!soc_device_match(gen3_soc_whitelist))
return -ENODEV;
diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c
index 9a3ff22dd0fe..669c6ab021c8 100644
--- a/drivers/mmc/host/rtsx_usb_sdmmc.c
+++ b/drivers/mmc/host/rtsx_usb_sdmmc.c
@@ -28,6 +28,7 @@
#include <linux/mmc/sd.h>
#include <linux/mmc/card.h>
#include <linux/scatterlist.h>
+#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/rtsx_usb.h>
@@ -1042,9 +1043,9 @@ static int sd_set_power_mode(struct rtsx_usb_sdmmc *host,
if (power_mode == MMC_POWER_OFF) {
err = sd_power_off(host);
- pm_runtime_put(sdmmc_dev(host));
+ pm_runtime_put_noidle(sdmmc_dev(host));
} else {
- pm_runtime_get_sync(sdmmc_dev(host));
+ pm_runtime_get_noresume(sdmmc_dev(host));
err = sd_power_on(host);
}
@@ -1297,16 +1298,20 @@ static void rtsx_usb_update_led(struct work_struct *work)
container_of(work, struct rtsx_usb_sdmmc, led_work);
struct rtsx_ucr *ucr = host->ucr;
- pm_runtime_get_sync(sdmmc_dev(host));
+ pm_runtime_get_noresume(sdmmc_dev(host));
mutex_lock(&ucr->dev_mutex);
+ if (host->power_mode == MMC_POWER_OFF)
+ goto out;
+
if (host->led.brightness == LED_OFF)
rtsx_usb_turn_off_led(ucr);
else
rtsx_usb_turn_on_led(ucr);
+out:
mutex_unlock(&ucr->dev_mutex);
- pm_runtime_put(sdmmc_dev(host));
+ pm_runtime_put_sync_suspend(sdmmc_dev(host));
}
#endif
@@ -1320,7 +1325,7 @@ static void rtsx_usb_init_host(struct rtsx_usb_sdmmc *host)
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 |
- MMC_CAP_NEEDS_POLL | MMC_CAP_ERASE;
+ MMC_CAP_ERASE | MMC_CAP_SYNC_RUNTIME_PM;
mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_FULL_PWR_CYCLE |
MMC_CAP2_NO_SDIO;
@@ -1363,8 +1368,6 @@ static int rtsx_usb_sdmmc_drv_probe(struct platform_device *pdev)
mutex_init(&host->host_mutex);
rtsx_usb_init_host(host);
- pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
pm_runtime_enable(&pdev->dev);
#ifdef RTSX_USB_USE_LEDS_CLASS
@@ -1419,7 +1422,6 @@ static int rtsx_usb_sdmmc_drv_remove(struct platform_device *pdev)
mmc_free_host(mmc);
pm_runtime_disable(&pdev->dev);
- pm_runtime_dont_use_autosuspend(&pdev->dev);
platform_set_drvdata(pdev, NULL);
dev_dbg(&(pdev->dev),
@@ -1428,6 +1430,31 @@ static int rtsx_usb_sdmmc_drv_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
+static int rtsx_usb_sdmmc_runtime_suspend(struct device *dev)
+{
+ struct rtsx_usb_sdmmc *host = dev_get_drvdata(dev);
+
+ host->mmc->caps &= ~MMC_CAP_NEEDS_POLL;
+ return 0;
+}
+
+static int rtsx_usb_sdmmc_runtime_resume(struct device *dev)
+{
+ struct rtsx_usb_sdmmc *host = dev_get_drvdata(dev);
+
+ host->mmc->caps |= MMC_CAP_NEEDS_POLL;
+ if (sdmmc_get_cd(host->mmc) == 1)
+ mmc_detect_change(host->mmc, 0);
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops rtsx_usb_sdmmc_dev_pm_ops = {
+ SET_RUNTIME_PM_OPS(rtsx_usb_sdmmc_runtime_suspend,
+ rtsx_usb_sdmmc_runtime_resume, NULL)
+};
+
static const struct platform_device_id rtsx_usb_sdmmc_ids[] = {
{
.name = "rtsx_usb_sdmmc",
@@ -1443,6 +1470,7 @@ static struct platform_driver rtsx_usb_sdmmc_driver = {
.id_table = rtsx_usb_sdmmc_ids,
.driver = {
.name = "rtsx_usb_sdmmc",
+ .pm = &rtsx_usb_sdmmc_dev_pm_ops,
},
};
module_platform_driver(rtsx_usb_sdmmc_driver);
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index f77493604312..10f5219b3b40 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -26,7 +26,6 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/mmc/slot-gpio.h>
#include <plat/gpio-cfg.h>
@@ -1406,18 +1405,7 @@ static int s3cmci_state_show(struct seq_file *seq, void *v)
return 0;
}
-static int s3cmci_state_open(struct inode *inode, struct file *file)
-{
- return single_open(file, s3cmci_state_show, inode->i_private);
-}
-
-static const struct file_operations s3cmci_fops_state = {
- .owner = THIS_MODULE,
- .open = s3cmci_state_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(s3cmci_state);
#define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r }
@@ -1459,18 +1447,7 @@ static int s3cmci_regs_show(struct seq_file *seq, void *v)
return 0;
}
-static int s3cmci_regs_open(struct inode *inode, struct file *file)
-{
- return single_open(file, s3cmci_regs_show, inode->i_private);
-}
-
-static const struct file_operations s3cmci_fops_regs = {
- .owner = THIS_MODULE,
- .open = s3cmci_regs_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(s3cmci_regs);
static void s3cmci_debugfs_attach(struct s3cmci_host *host)
{
@@ -1484,14 +1461,14 @@ static void s3cmci_debugfs_attach(struct s3cmci_host *host)
host->debug_state = debugfs_create_file("state", 0444,
host->debug_root, host,
- &s3cmci_fops_state);
+ &s3cmci_state_fops);
if (IS_ERR(host->debug_state))
dev_err(dev, "failed to create debug state file\n");
host->debug_regs = debugfs_create_file("regs", 0444,
host->debug_root, host,
- &s3cmci_fops_regs);
+ &s3cmci_regs_fops);
if (IS_ERR(host->debug_regs))
dev_err(dev, "failed to create debug regs file\n");
@@ -1545,25 +1522,19 @@ static int s3cmci_probe_pdata(struct s3cmci_host *host)
if (pdata->wprotect_invert)
mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
- if (pdata->detect_invert)
- mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
-
- if (gpio_is_valid(pdata->gpio_detect)) {
- ret = mmc_gpio_request_cd(mmc, pdata->gpio_detect, 0);
- if (ret) {
- dev_err(&pdev->dev, "error requesting GPIO for CD %d\n",
- ret);
- return ret;
- }
+ /* If we get -ENOENT we have no card detect GPIO line */
+ ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+ if (ret != -ENOENT) {
+ dev_err(&pdev->dev, "error requesting GPIO for CD %d\n",
+ ret);
+ return ret;
}
- if (gpio_is_valid(pdata->gpio_wprotect)) {
- ret = mmc_gpio_request_ro(mmc, pdata->gpio_wprotect);
- if (ret) {
- dev_err(&pdev->dev, "error requesting GPIO for WP %d\n",
- ret);
- return ret;
- }
+ ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, false, 0, NULL);
+ if (ret != -ENOENT) {
+ dev_err(&pdev->dev, "error requesting GPIO for WP %d\n",
+ ret);
+ return ret;
}
return 0;
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 057e24f4a620..6669e540851d 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -437,7 +437,8 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
MMC_CAP_CMD_DURING_TFR | MMC_CAP_WAIT_WHILE_BUSY,
.flags = SDHCI_ACPI_RUNTIME_PM,
- .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_NO_LED,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_STOP_WITH_TC |
SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400,
@@ -448,6 +449,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+ SDHCI_QUIRK_NO_LED |
SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
.caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD |
@@ -462,7 +464,8 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
.flags = SDHCI_ACPI_SD_CD | SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL |
SDHCI_ACPI_RUNTIME_PM,
- .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_NO_LED,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
SDHCI_QUIRK2_STOP_WITH_TC,
.caps = MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_AGGRESSIVE_PM,
diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c
index 7a343b87b5e5..e2412875dac5 100644
--- a/drivers/mmc/host/sdhci-cadence.c
+++ b/drivers/mmc/host/sdhci-cadence.c
@@ -14,7 +14,7 @@
*/
#include <linux/bitfield.h>
-#include <linux/bitops.h>
+#include <linux/bits.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/mmc/host.h>
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index f44e49014a44..d0d319398a54 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -12,7 +12,6 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/mmc/host.h>
@@ -21,7 +20,6 @@
#include <linux/mmc/slot-gpio.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/mmc-esdhc-imx.h>
#include <linux/pm_runtime.h>
@@ -429,7 +427,7 @@ static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
val = readl(host->ioaddr + ESDHC_MIX_CTRL);
else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING)
/* the std tuning bits is in ACMD12_ERR for imx6sl */
- val = readl(host->ioaddr + SDHCI_ACMD12_ERR);
+ val = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS);
}
if (val & ESDHC_MIX_CTRL_EXE_TUNE)
@@ -494,7 +492,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
}
writel(new_val , host->ioaddr + ESDHC_MIX_CTRL);
} else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
- u32 v = readl(host->ioaddr + SDHCI_ACMD12_ERR);
+ u32 v = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS);
u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
if (val & SDHCI_CTRL_TUNED_CLK) {
v |= ESDHC_MIX_CTRL_SMPCLK_SEL;
@@ -512,7 +510,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
v &= ~ESDHC_MIX_CTRL_EXE_TUNE;
}
- writel(v, host->ioaddr + SDHCI_ACMD12_ERR);
+ writel(v, host->ioaddr + SDHCI_AUTO_CMD_STATUS);
writel(m, host->ioaddr + ESDHC_MIX_CTRL);
}
return;
@@ -957,9 +955,9 @@ static void esdhc_reset_tuning(struct sdhci_host *host)
writel(ctrl, host->ioaddr + ESDHC_MIX_CTRL);
writel(0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS);
} else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
- ctrl = readl(host->ioaddr + SDHCI_ACMD12_ERR);
+ ctrl = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS);
ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
- writel(ctrl, host->ioaddr + SDHCI_ACMD12_ERR);
+ writel(ctrl, host->ioaddr + SDHCI_AUTO_CMD_STATUS);
}
}
}
@@ -1139,8 +1137,12 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
if (of_get_property(np, "fsl,wp-controller", NULL))
boarddata->wp_type = ESDHC_WP_CONTROLLER;
- boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
- if (gpio_is_valid(boarddata->wp_gpio))
+ /*
+ * If we have this property, then activate WP check.
+ * Retrieveing and requesting the actual WP GPIO will happen
+ * in the call to mmc_of_parse().
+ */
+ if (of_property_read_bool(np, "wp-gpios"))
boarddata->wp_type = ESDHC_WP_GPIO;
of_property_read_u32(np, "fsl,tuning-step", &boarddata->tuning_step);
@@ -1198,7 +1200,7 @@ static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev,
host->mmc->parent->platform_data);
/* write_protect */
if (boarddata->wp_type == ESDHC_WP_GPIO) {
- err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
+ err = mmc_gpiod_request_ro(host->mmc, "wp", 0, false, 0, NULL);
if (err) {
dev_err(mmc_dev(host->mmc),
"failed to request write-protect gpio!\n");
@@ -1210,7 +1212,7 @@ static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev,
/* card_detect */
switch (boarddata->cd_type) {
case ESDHC_CD_GPIO:
- err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
+ err = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL);
if (err) {
dev_err(mmc_dev(host->mmc),
"failed to request card-detect gpio!\n");
@@ -1317,7 +1319,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
/* clear tuning bits in case ROM has set it already */
writel(0x0, host->ioaddr + ESDHC_MIX_CTRL);
- writel(0x0, host->ioaddr + SDHCI_ACMD12_ERR);
+ writel(0x0, host->ioaddr + SDHCI_AUTO_CMD_STATUS);
writel(0x0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS);
}
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
index 3f16d9c90ba2..39dbbd6eaf28 100644
--- a/drivers/mmc/host/sdhci-esdhc.h
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -59,9 +59,33 @@
/* Tuning Block Control Register */
#define ESDHC_TBCTL 0x120
+#define ESDHC_HS400_WNDW_ADJUST 0x00000040
+#define ESDHC_HS400_MODE 0x00000010
#define ESDHC_TB_EN 0x00000004
#define ESDHC_TBPTR 0x128
+/* SD Clock Control Register */
+#define ESDHC_SDCLKCTL 0x144
+#define ESDHC_LPBK_CLK_SEL 0x80000000
+#define ESDHC_CMD_CLK_CTL 0x00008000
+
+/* SD Timing Control Register */
+#define ESDHC_SDTIMNGCTL 0x148
+#define ESDHC_FLW_CTL_BG 0x00008000
+
+/* DLL Config 0 Register */
+#define ESDHC_DLLCFG0 0x160
+#define ESDHC_DLL_ENABLE 0x80000000
+#define ESDHC_DLL_FREQ_SEL 0x08000000
+
+/* DLL Config 1 Register */
+#define ESDHC_DLLCFG1 0x164
+#define ESDHC_DLL_PD_PULSE_STRETCH_SEL 0x80000000
+
+/* DLL Status 0 Register */
+#define ESDHC_DLLSTAT0 0x170
+#define ESDHC_DLL_STS_SLV_LOCK 0x08000000
+
/* Control Register for DMA transfer */
#define ESDHC_DMA_SYSCTL 0x40c
#define ESDHC_PERIPHERAL_CLK_SEL 0x00080000
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 3cc8bfee6c18..d6c9ebd8d263 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -232,6 +232,7 @@ struct sdhci_msm_variant_ops {
*/
struct sdhci_msm_variant_info {
bool mci_removed;
+ bool restore_dll_config;
const struct sdhci_msm_variant_ops *var_ops;
const struct sdhci_msm_offset *offset;
};
@@ -256,8 +257,11 @@ struct sdhci_msm_host {
bool pwr_irq_flag;
u32 caps_0;
bool mci_removed;
+ bool restore_dll_config;
const struct sdhci_msm_variant_ops *var_ops;
const struct sdhci_msm_offset *offset;
+ bool use_cdr;
+ u32 transfer_mode;
};
static const struct sdhci_msm_offset *sdhci_priv_msm_offset(struct sdhci_host *host)
@@ -1025,6 +1029,69 @@ out:
return ret;
}
+static bool sdhci_msm_is_tuning_needed(struct sdhci_host *host)
+{
+ struct mmc_ios *ios = &host->mmc->ios;
+
+ /*
+ * Tuning is required for SDR104, HS200 and HS400 cards and
+ * if clock frequency is greater than 100MHz in these modes.
+ */
+ if (host->clock <= CORE_FREQ_100MHZ ||
+ !(ios->timing == MMC_TIMING_MMC_HS400 ||
+ ios->timing == MMC_TIMING_MMC_HS200 ||
+ ios->timing == MMC_TIMING_UHS_SDR104) ||
+ ios->enhanced_strobe)
+ return false;
+
+ return true;
+}
+
+static int sdhci_msm_restore_sdr_dll_config(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ int ret;
+
+ /*
+ * SDR DLL comes into picture only for timing modes which needs
+ * tuning.
+ */
+ if (!sdhci_msm_is_tuning_needed(host))
+ return 0;
+
+ /* Reset the tuning block */
+ ret = msm_init_cm_dll(host);
+ if (ret)
+ return ret;
+
+ /* Restore the tuning block */
+ ret = msm_config_cm_dll_phase(host, msm_host->saved_tuning_phase);
+
+ return ret;
+}
+
+static void sdhci_msm_set_cdr(struct sdhci_host *host, bool enable)
+{
+ const struct sdhci_msm_offset *msm_offset = sdhci_priv_msm_offset(host);
+ u32 config, oldconfig = readl_relaxed(host->ioaddr +
+ msm_offset->core_dll_config);
+
+ config = oldconfig;
+ if (enable) {
+ config |= CORE_CDR_EN;
+ config &= ~CORE_CDR_EXT_EN;
+ } else {
+ config &= ~CORE_CDR_EN;
+ config |= CORE_CDR_EXT_EN;
+ }
+
+ if (config != oldconfig) {
+ writel_relaxed(config, host->ioaddr +
+ msm_offset->core_dll_config);
+ }
+}
+
static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
struct sdhci_host *host = mmc_priv(mmc);
@@ -1035,15 +1102,14 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
- /*
- * Tuning is required for SDR104, HS200 and HS400 cards and
- * if clock frequency is greater than 100MHz in these modes.
- */
- if (host->clock <= CORE_FREQ_100MHZ ||
- !(ios.timing == MMC_TIMING_MMC_HS400 ||
- ios.timing == MMC_TIMING_MMC_HS200 ||
- ios.timing == MMC_TIMING_UHS_SDR104))
+ if (!sdhci_msm_is_tuning_needed(host)) {
+ msm_host->use_cdr = false;
+ sdhci_msm_set_cdr(host, false);
return 0;
+ }
+
+ /* Clock-Data-Recovery used to dynamically adjust RX sampling point */
+ msm_host->use_cdr = true;
/*
* For HS400 tuning in HS200 timing requires:
@@ -1069,7 +1135,6 @@ retry:
if (rc)
return rc;
- msm_host->saved_tuning_phase = phase;
rc = mmc_send_tuning(mmc, opcode, NULL);
if (!rc) {
/* Tuning is successful at this tuning point */
@@ -1094,6 +1159,7 @@ retry:
rc = msm_config_cm_dll_phase(host, phase);
if (rc)
return rc;
+ msm_host->saved_tuning_phase = phase;
dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
mmc_hostname(mmc), phase);
} else {
@@ -1525,6 +1591,19 @@ static int __sdhci_msm_check_write(struct sdhci_host *host, u16 val, int reg)
case SDHCI_POWER_CONTROL:
req_type = !val ? REQ_BUS_OFF : REQ_BUS_ON;
break;
+ case SDHCI_TRANSFER_MODE:
+ msm_host->transfer_mode = val;
+ break;
+ case SDHCI_COMMAND:
+ if (!msm_host->use_cdr)
+ break;
+ if ((msm_host->transfer_mode & SDHCI_TRNS_READ) &&
+ SDHCI_GET_CMD(val) != MMC_SEND_TUNING_BLOCK_HS200 &&
+ SDHCI_GET_CMD(val) != MMC_SEND_TUNING_BLOCK)
+ sdhci_msm_set_cdr(host, true);
+ else
+ sdhci_msm_set_cdr(host, false);
+ break;
}
if (req_type) {
@@ -1616,7 +1695,6 @@ static const struct sdhci_msm_variant_ops v5_var_ops = {
};
static const struct sdhci_msm_variant_info sdhci_msm_mci_var = {
- .mci_removed = false,
.var_ops = &mci_var_ops,
.offset = &sdhci_msm_mci_offset,
};
@@ -1627,9 +1705,17 @@ static const struct sdhci_msm_variant_info sdhci_msm_v5_var = {
.offset = &sdhci_msm_v5_offset,
};
+static const struct sdhci_msm_variant_info sdm845_sdhci_var = {
+ .mci_removed = true,
+ .restore_dll_config = true,
+ .var_ops = &v5_var_ops,
+ .offset = &sdhci_msm_v5_offset,
+};
+
static const struct of_device_id sdhci_msm_dt_match[] = {
{.compatible = "qcom,sdhci-msm-v4", .data = &sdhci_msm_mci_var},
{.compatible = "qcom,sdhci-msm-v5", .data = &sdhci_msm_v5_var},
+ {.compatible = "qcom,sdm845-sdhci", .data = &sdm845_sdhci_var},
{},
};
@@ -1689,6 +1775,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
var_info = of_device_get_match_data(&pdev->dev);
msm_host->mci_removed = var_info->mci_removed;
+ msm_host->restore_dll_config = var_info->restore_dll_config;
msm_host->var_ops = var_info->var_ops;
msm_host->offset = var_info->offset;
@@ -1910,8 +1997,7 @@ static int sdhci_msm_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-static int sdhci_msm_runtime_suspend(struct device *dev)
+static __maybe_unused int sdhci_msm_runtime_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -1923,16 +2009,26 @@ static int sdhci_msm_runtime_suspend(struct device *dev)
return 0;
}
-static int sdhci_msm_runtime_resume(struct device *dev)
+static __maybe_unused int sdhci_msm_runtime_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ int ret;
- return clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
msm_host->bulk_clks);
+ if (ret)
+ return ret;
+ /*
+ * Whenever core-clock is gated dynamically, it's needed to
+ * restore the SDR DLL settings when the clock is ungated.
+ */
+ if (msm_host->restore_dll_config && msm_host->clk_rate)
+ return sdhci_msm_restore_sdr_dll_config(host);
+
+ return 0;
}
-#endif
static const struct dev_pm_ops sdhci_msm_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 142c4b802f31..c9e3e050ccc8 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -231,25 +231,6 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
}
}
-static void sdhci_arasan_am654_set_clock(struct sdhci_host *host,
- unsigned int clock)
-{
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
-
- if (sdhci_arasan->is_phy_on) {
- phy_power_off(sdhci_arasan->phy);
- sdhci_arasan->is_phy_on = false;
- }
-
- sdhci_set_clock(host, clock);
-
- if (clock > PHY_CLK_TOO_SLOW_HZ) {
- phy_power_on(sdhci_arasan->phy);
- sdhci_arasan->is_phy_on = true;
- }
-}
-
static void sdhci_arasan_hs400_enhanced_strobe(struct mmc_host *mmc,
struct mmc_ios *ios)
{
@@ -335,29 +316,6 @@ static struct sdhci_arasan_of_data sdhci_arasan_data = {
.pdata = &sdhci_arasan_pdata,
};
-static const struct sdhci_ops sdhci_arasan_am654_ops = {
- .set_clock = sdhci_arasan_am654_set_clock,
- .get_max_clock = sdhci_pltfm_clk_get_max_clock,
- .get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
- .set_bus_width = sdhci_set_bus_width,
- .reset = sdhci_arasan_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
-};
-
-static const struct sdhci_pltfm_data sdhci_arasan_am654_pdata = {
- .ops = &sdhci_arasan_am654_ops,
- .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
- SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
- SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
- .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
- SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
- SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400,
-};
-
-static const struct sdhci_arasan_of_data sdhci_arasan_am654_data = {
- .pdata = &sdhci_arasan_am654_pdata,
-};
-
static u32 sdhci_arasan_cqhci_irq(struct sdhci_host *host, u32 intmask)
{
int cmd_error = 0;
@@ -520,10 +478,6 @@ static const struct of_device_id sdhci_arasan_of_match[] = {
.compatible = "rockchip,rk3399-sdhci-5.1",
.data = &sdhci_arasan_rk3399_data,
},
- {
- .compatible = "ti,am654-sdhci-5.1",
- .data = &sdhci_arasan_am654_data,
- },
/* Generic compatible below here */
{
.compatible = "arasan,sdhci-8.9a",
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 86fc9f022002..4e669b4edfc1 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -78,6 +78,8 @@ struct sdhci_esdhc {
u8 vendor_ver;
u8 spec_ver;
bool quirk_incorrect_hostver;
+ bool quirk_limited_clk_division;
+ bool quirk_unreliable_pulse_detection;
bool quirk_fixup_tuning;
unsigned int peripheral_clock;
const struct esdhc_clk_fixup *clk_fixup;
@@ -528,8 +530,12 @@ static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
/* Wait max 20 ms */
timeout = ktime_add_ms(ktime_get(), 20);
val = ESDHC_CLOCK_STABLE;
- while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
- if (ktime_after(ktime_get(), timeout)) {
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (sdhci_readl(host, ESDHC_PRSSTAT) & val)
+ break;
+ if (timedout) {
pr_err("%s: Internal clock never stabilised.\n",
mmc_hostname(host->mmc));
break;
@@ -544,6 +550,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
int pre_div = 1;
int div = 1;
+ int division;
ktime_t timeout;
long fixup = 0;
u32 temp;
@@ -579,6 +586,26 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
while (host->max_clk / pre_div / div > clock && div < 16)
div++;
+ if (esdhc->quirk_limited_clk_division &&
+ clock == MMC_HS200_MAX_DTR &&
+ (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 ||
+ host->flags & SDHCI_HS400_TUNING)) {
+ division = pre_div * div;
+ if (division <= 4) {
+ pre_div = 4;
+ div = 1;
+ } else if (division <= 8) {
+ pre_div = 4;
+ div = 2;
+ } else if (division <= 12) {
+ pre_div = 4;
+ div = 3;
+ } else {
+ pr_warn("%s: using unsupported clock division.\n",
+ mmc_hostname(host->mmc));
+ }
+ }
+
dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
clock, host->max_clk / pre_div / div);
host->mmc->actual_clock = host->max_clk / pre_div / div;
@@ -592,10 +619,36 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
| (pre_div << ESDHC_PREDIV_SHIFT));
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+ if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 &&
+ clock == MMC_HS200_MAX_DTR) {
+ temp = sdhci_readl(host, ESDHC_TBCTL);
+ sdhci_writel(host, temp | ESDHC_HS400_MODE, ESDHC_TBCTL);
+ temp = sdhci_readl(host, ESDHC_SDCLKCTL);
+ sdhci_writel(host, temp | ESDHC_CMD_CLK_CTL, ESDHC_SDCLKCTL);
+ esdhc_clock_enable(host, true);
+
+ temp = sdhci_readl(host, ESDHC_DLLCFG0);
+ temp |= ESDHC_DLL_ENABLE;
+ if (host->mmc->actual_clock == MMC_HS200_MAX_DTR)
+ temp |= ESDHC_DLL_FREQ_SEL;
+ sdhci_writel(host, temp, ESDHC_DLLCFG0);
+ temp = sdhci_readl(host, ESDHC_TBCTL);
+ sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL);
+
+ esdhc_clock_enable(host, false);
+ temp = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+ temp |= ESDHC_FLUSH_ASYNC_FIFO;
+ sdhci_writel(host, temp, ESDHC_DMA_SYSCTL);
+ }
+
/* Wait max 20 ms */
timeout = ktime_add_ms(ktime_get(), 20);
- while (!(sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)) {
- if (ktime_after(ktime_get(), timeout)) {
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)
+ break;
+ if (timedout) {
pr_err("%s: Internal clock never stabilised.\n",
mmc_hostname(host->mmc));
return;
@@ -603,6 +656,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
udelay(10);
}
+ temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
temp |= ESDHC_CLOCK_SDCLKEN;
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
}
@@ -631,6 +685,8 @@ static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
static void esdhc_reset(struct sdhci_host *host, u8 mask)
{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
u32 val;
sdhci_reset(host, mask);
@@ -642,6 +698,12 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask)
val = sdhci_readl(host, ESDHC_TBCTL);
val &= ~ESDHC_TB_EN;
sdhci_writel(host, val, ESDHC_TBCTL);
+
+ if (esdhc->quirk_unreliable_pulse_detection) {
+ val = sdhci_readl(host, ESDHC_DLLCFG1);
+ val &= ~ESDHC_DLL_PD_PULSE_STRETCH_SEL;
+ sdhci_writel(host, val, ESDHC_DLLCFG1);
+ }
}
}
@@ -728,25 +790,50 @@ static struct soc_device_attribute soc_fixup_tuning[] = {
{ },
};
-static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+static void esdhc_tuning_block_enable(struct sdhci_host *host, bool enable)
{
- struct sdhci_host *host = mmc_priv(mmc);
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
u32 val;
- /* Use tuning block for tuning procedure */
esdhc_clock_enable(host, false);
+
val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
val |= ESDHC_FLUSH_ASYNC_FIFO;
sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
val = sdhci_readl(host, ESDHC_TBCTL);
- val |= ESDHC_TB_EN;
+ if (enable)
+ val |= ESDHC_TB_EN;
+ else
+ val &= ~ESDHC_TB_EN;
sdhci_writel(host, val, ESDHC_TBCTL);
+
esdhc_clock_enable(host, true);
+}
+
+static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+ bool hs400_tuning;
+ u32 val;
+ int ret;
+
+ if (esdhc->quirk_limited_clk_division &&
+ host->flags & SDHCI_HS400_TUNING)
+ esdhc_of_set_clock(host, host->clock);
+
+ esdhc_tuning_block_enable(host, true);
+
+ hs400_tuning = host->flags & SDHCI_HS400_TUNING;
+ ret = sdhci_execute_tuning(mmc, opcode);
+
+ if (hs400_tuning) {
+ val = sdhci_readl(host, ESDHC_SDTIMNGCTL);
+ val |= ESDHC_FLW_CTL_BG;
+ sdhci_writel(host, val, ESDHC_SDTIMNGCTL);
+ }
- sdhci_execute_tuning(mmc, opcode);
if (host->tuning_err == -EAGAIN && esdhc->quirk_fixup_tuning) {
/* program TBPTR[TB_WNDW_END_PTR] = 3*DIV_RATIO and
@@ -765,7 +852,16 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
sdhci_writel(host, val, ESDHC_TBCTL);
sdhci_execute_tuning(mmc, opcode);
}
- return 0;
+ return ret;
+}
+
+static void esdhc_set_uhs_signaling(struct sdhci_host *host,
+ unsigned int timing)
+{
+ if (timing == MMC_TIMING_MMC_HS400)
+ esdhc_tuning_block_enable(host, true);
+ else
+ sdhci_set_uhs_signaling(host, timing);
}
#ifdef CONFIG_PM_SLEEP
@@ -814,7 +910,7 @@ static const struct sdhci_ops sdhci_esdhc_be_ops = {
.adma_workaround = esdhc_of_adma_workaround,
.set_bus_width = esdhc_pltfm_set_bus_width,
.reset = esdhc_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_uhs_signaling = esdhc_set_uhs_signaling,
};
static const struct sdhci_ops sdhci_esdhc_le_ops = {
@@ -831,7 +927,7 @@ static const struct sdhci_ops sdhci_esdhc_le_ops = {
.adma_workaround = esdhc_of_adma_workaround,
.set_bus_width = esdhc_pltfm_set_bus_width,
.reset = esdhc_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_uhs_signaling = esdhc_set_uhs_signaling,
};
static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
@@ -857,6 +953,16 @@ static struct soc_device_attribute soc_incorrect_hostver[] = {
{ },
};
+static struct soc_device_attribute soc_fixup_sdhc_clkdivs[] = {
+ { .family = "QorIQ LX2160A", .revision = "1.0", },
+ { },
+};
+
+static struct soc_device_attribute soc_unreliable_pulse_detection[] = {
+ { .family = "QorIQ LX2160A", .revision = "1.0", },
+ { },
+};
+
static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
{
const struct of_device_id *match;
@@ -879,6 +985,16 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
else
esdhc->quirk_incorrect_hostver = false;
+ if (soc_device_match(soc_fixup_sdhc_clkdivs))
+ esdhc->quirk_limited_clk_division = true;
+ else
+ esdhc->quirk_limited_clk_division = false;
+
+ if (soc_device_match(soc_unreliable_pulse_detection))
+ esdhc->quirk_unreliable_pulse_detection = true;
+ else
+ esdhc->quirk_unreliable_pulse_detection = false;
+
match = of_match_node(sdhci_esdhc_of_match, pdev->dev.of_node);
if (match)
esdhc->clk_fixup = match->data;
@@ -909,6 +1025,12 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
}
}
+static int esdhc_hs400_prepare_ddr(struct mmc_host *mmc)
+{
+ esdhc_tuning_block_enable(mmc_priv(mmc), false);
+ return 0;
+}
+
static int sdhci_esdhc_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
@@ -932,6 +1054,7 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
host->mmc_host_ops.start_signal_voltage_switch =
esdhc_signal_voltage_switch;
host->mmc_host_ops.execute_tuning = esdhc_execute_tuning;
+ host->mmc_host_ops.hs400_prepare_ddr = esdhc_hs400_prepare_ddr;
host->tuning_delay = 1;
esdhc_init(pdev, host);
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index d264391616f9..c11c18a9aacb 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -27,6 +27,7 @@
#include <linux/regulator/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/sys_soc.h>
+#include <linux/thermal.h>
#include "sdhci-pltfm.h"
@@ -115,6 +116,7 @@ struct sdhci_omap_host {
struct pinctrl *pinctrl;
struct pinctrl_state **pinctrl_state;
+ bool is_tuning;
};
static void sdhci_omap_start_clock(struct sdhci_omap_host *omap_host);
@@ -220,8 +222,12 @@ static void sdhci_omap_conf_bus_power(struct sdhci_omap_host *omap_host,
/* wait 1ms */
timeout = ktime_add_ms(ktime_get(), SDHCI_OMAP_TIMEOUT);
- while (!(sdhci_omap_readl(omap_host, SDHCI_OMAP_HCTL) & HCTL_SDBP)) {
- if (WARN_ON(ktime_after(ktime_get(), timeout)))
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (sdhci_omap_readl(omap_host, SDHCI_OMAP_HCTL) & HCTL_SDBP)
+ break;
+ if (WARN_ON(timedout))
return;
usleep_range(5, 10);
}
@@ -285,19 +291,19 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
struct sdhci_host *host = mmc_priv(mmc);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+ struct thermal_zone_device *thermal_dev;
struct device *dev = omap_host->dev;
struct mmc_ios *ios = &mmc->ios;
u32 start_window = 0, max_window = 0;
+ bool single_point_failure = false;
bool dcrc_was_enabled = false;
u8 cur_match, prev_match = 0;
u32 length = 0, max_len = 0;
u32 phase_delay = 0;
+ int temperature;
int ret = 0;
u32 reg;
-
- pltfm_host = sdhci_priv(host);
- omap_host = sdhci_pltfm_priv(pltfm_host);
- dev = omap_host->dev;
+ int i;
/* clock tuning is not needed for upto 52MHz */
if (ios->clock <= 52000000)
@@ -307,6 +313,16 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
if (ios->timing == MMC_TIMING_UHS_SDR50 && !(reg & CAPA2_TSDR50))
return 0;
+ thermal_dev = thermal_zone_get_zone_by_name("cpu_thermal");
+ if (IS_ERR(thermal_dev)) {
+ dev_err(dev, "Unable to get thermal zone for tuning\n");
+ return PTR_ERR(thermal_dev);
+ }
+
+ ret = thermal_zone_get_temp(thermal_dev, &temperature);
+ if (ret)
+ return ret;
+
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_DLL);
reg |= DLL_SWT;
sdhci_omap_writel(omap_host, SDHCI_OMAP_DLL, reg);
@@ -322,6 +338,13 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
dcrc_was_enabled = true;
}
+ omap_host->is_tuning = true;
+
+ /*
+ * Stage 1: Search for a maximum pass window ignoring any
+ * any single point failures. If the tuning value ends up
+ * near it, move away from it in stage 2 below
+ */
while (phase_delay <= MAX_PHASE_DELAY) {
sdhci_omap_set_dll(omap_host, phase_delay);
@@ -329,10 +352,15 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
if (cur_match) {
if (prev_match) {
length++;
+ } else if (single_point_failure) {
+ /* ignore single point failure */
+ length++;
} else {
start_window = phase_delay;
length = 1;
}
+ } else {
+ single_point_failure = prev_match;
}
if (length > max_len) {
@@ -350,18 +378,84 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
goto tuning_error;
}
+ /*
+ * Assign tuning value as a ratio of maximum pass window based
+ * on temperature
+ */
+ if (temperature < -20000)
+ phase_delay = min(max_window + 4 * max_len - 24,
+ max_window +
+ DIV_ROUND_UP(13 * max_len, 16) * 4);
+ else if (temperature < 20000)
+ phase_delay = max_window + DIV_ROUND_UP(9 * max_len, 16) * 4;
+ else if (temperature < 40000)
+ phase_delay = max_window + DIV_ROUND_UP(8 * max_len, 16) * 4;
+ else if (temperature < 70000)
+ phase_delay = max_window + DIV_ROUND_UP(7 * max_len, 16) * 4;
+ else if (temperature < 90000)
+ phase_delay = max_window + DIV_ROUND_UP(5 * max_len, 16) * 4;
+ else if (temperature < 120000)
+ phase_delay = max_window + DIV_ROUND_UP(4 * max_len, 16) * 4;
+ else
+ phase_delay = max_window + DIV_ROUND_UP(3 * max_len, 16) * 4;
+
+ /*
+ * Stage 2: Search for a single point failure near the chosen tuning
+ * value in two steps. First in the +3 to +10 range and then in the
+ * +2 to -10 range. If found, move away from it in the appropriate
+ * direction by the appropriate amount depending on the temperature.
+ */
+ for (i = 3; i <= 10; i++) {
+ sdhci_omap_set_dll(omap_host, phase_delay + i);
+
+ if (mmc_send_tuning(mmc, opcode, NULL)) {
+ if (temperature < 10000)
+ phase_delay += i + 6;
+ else if (temperature < 20000)
+ phase_delay += i - 12;
+ else if (temperature < 70000)
+ phase_delay += i - 8;
+ else
+ phase_delay += i - 6;
+
+ goto single_failure_found;
+ }
+ }
+
+ for (i = 2; i >= -10; i--) {
+ sdhci_omap_set_dll(omap_host, phase_delay + i);
+
+ if (mmc_send_tuning(mmc, opcode, NULL)) {
+ if (temperature < 10000)
+ phase_delay += i + 12;
+ else if (temperature < 20000)
+ phase_delay += i + 8;
+ else if (temperature < 70000)
+ phase_delay += i + 8;
+ else if (temperature < 90000)
+ phase_delay += i + 10;
+ else
+ phase_delay += i + 12;
+
+ goto single_failure_found;
+ }
+ }
+
+single_failure_found:
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_AC12);
if (!(reg & AC12_SCLK_SEL)) {
ret = -EIO;
goto tuning_error;
}
- phase_delay = max_window + 4 * (max_len >> 1);
sdhci_omap_set_dll(omap_host, phase_delay);
+ omap_host->is_tuning = false;
+
goto ret;
tuning_error:
+ omap_host->is_tuning = false;
dev_err(dev, "Tuning failed\n");
sdhci_omap_disable_tuning(omap_host);
@@ -653,8 +747,12 @@ static void sdhci_omap_init_74_clocks(struct sdhci_host *host, u8 power_mode)
/* wait 1ms */
timeout = ktime_add_ms(ktime_get(), SDHCI_OMAP_TIMEOUT);
- while (!(sdhci_omap_readl(omap_host, SDHCI_OMAP_STAT) & INT_CC_EN)) {
- if (WARN_ON(ktime_after(ktime_get(), timeout)))
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (sdhci_omap_readl(omap_host, SDHCI_OMAP_STAT) & INT_CC_EN)
+ break;
+ if (WARN_ON(timedout))
return;
usleep_range(5, 10);
}
@@ -687,6 +785,18 @@ static void sdhci_omap_set_uhs_signaling(struct sdhci_host *host,
sdhci_omap_start_clock(omap_host);
}
+void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+
+ /* Don't reset data lines during tuning operation */
+ if (omap_host->is_tuning)
+ mask &= ~SDHCI_RESET_DATA;
+
+ sdhci_reset(host, mask);
+}
+
static struct sdhci_ops sdhci_omap_ops = {
.set_clock = sdhci_omap_set_clock,
.set_power = sdhci_omap_set_power,
@@ -695,7 +805,7 @@ static struct sdhci_ops sdhci_omap_ops = {
.get_min_clock = sdhci_omap_get_min_clock,
.set_bus_width = sdhci_omap_set_bus_width,
.platform_send_init_74_clocks = sdhci_omap_init_74_clocks,
- .reset = sdhci_reset,
+ .reset = sdhci_omap_reset,
.set_uhs_signaling = sdhci_omap_set_uhs_signaling,
};
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index c4115bae5db1..2a6eba74b94e 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -710,11 +710,15 @@ static int intel_execute_tuning(struct mmc_host *mmc, u32 opcode)
static void byt_probe_slot(struct sdhci_pci_slot *slot)
{
struct mmc_host_ops *ops = &slot->host->mmc_host_ops;
+ struct device *dev = &slot->chip->pdev->dev;
+ struct mmc_host *mmc = slot->host->mmc;
byt_read_dsm(slot);
ops->execute_tuning = intel_execute_tuning;
ops->start_signal_voltage_switch = intel_start_signal_voltage_switch;
+
+ device_property_read_u32(dev, "max-frequency", &mmc->f_max);
}
static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
@@ -937,7 +941,8 @@ static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = {
.allow_runtime_pm = true,
.probe_slot = byt_emmc_probe_slot,
- .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_NO_LED,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 |
SDHCI_QUIRK2_STOP_WITH_TC,
@@ -957,7 +962,8 @@ static const struct sdhci_pci_fixes sdhci_intel_glk_emmc = {
.runtime_suspend = glk_runtime_suspend,
.runtime_resume = glk_runtime_resume,
#endif
- .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_NO_LED,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 |
SDHCI_QUIRK2_STOP_WITH_TC,
@@ -966,7 +972,8 @@ static const struct sdhci_pci_fixes sdhci_intel_glk_emmc = {
};
static const struct sdhci_pci_fixes sdhci_ni_byt_sdio = {
- .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_NO_LED,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON |
SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.allow_runtime_pm = true,
@@ -976,7 +983,8 @@ static const struct sdhci_pci_fixes sdhci_ni_byt_sdio = {
};
static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
- .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_NO_LED,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON |
SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.allow_runtime_pm = true,
@@ -986,7 +994,8 @@ static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
};
static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
- .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_NO_LED,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_STOP_WITH_TC,
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
index 5956e90380e8..5b5eb53a63d2 100644
--- a/drivers/mmc/host/sdhci-xenon-phy.c
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -357,9 +357,13 @@ static int xenon_emmc_phy_enable_dll(struct sdhci_host *host)
/* Wait max 32 ms */
timeout = ktime_add_ms(ktime_get(), 32);
- while (!(sdhci_readw(host, XENON_SLOT_EXT_PRESENT_STATE) &
- XENON_DLL_LOCK_STATE)) {
- if (ktime_after(ktime_get(), timeout)) {
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (sdhci_readw(host, XENON_SLOT_EXT_PRESENT_STATE) &
+ XENON_DLL_LOCK_STATE)
+ break;
+ if (timedout) {
dev_err(mmc_dev(host->mmc), "Wait for DLL Lock time-out\n");
return -ETIMEDOUT;
}
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 4d0791f6ec23..a0b5089b3274 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -34,9 +34,13 @@ static int xenon_enable_internal_clk(struct sdhci_host *host)
sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
/* Wait max 20 ms */
timeout = ktime_add_ms(ktime_get(), 20);
- while (!((reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
- & SDHCI_CLOCK_INT_STABLE)) {
- if (ktime_after(ktime_get(), timeout)) {
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ if (reg & SDHCI_CLOCK_INT_STABLE)
+ break;
+ if (timedout) {
dev_err(mmc_dev(host->mmc), "Internal clock never stabilised.\n");
return -ETIMEDOUT;
}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index df05352b6a4a..a22e11a65658 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -82,8 +82,8 @@ void sdhci_dumpregs(struct sdhci_host *host)
SDHCI_DUMP("Int enab: 0x%08x | Sig enab: 0x%08x\n",
sdhci_readl(host, SDHCI_INT_ENABLE),
sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
- SDHCI_DUMP("AC12 err: 0x%08x | Slot int: 0x%08x\n",
- sdhci_readw(host, SDHCI_ACMD12_ERR),
+ SDHCI_DUMP("ACmd stat: 0x%08x | Slot int: 0x%08x\n",
+ sdhci_readw(host, SDHCI_AUTO_CMD_STATUS),
sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
SDHCI_DUMP("Caps: 0x%08x | Caps_1: 0x%08x\n",
sdhci_readl(host, SDHCI_CAPABILITIES),
@@ -349,6 +349,9 @@ static void __sdhci_led_activate(struct sdhci_host *host)
{
u8 ctrl;
+ if (host->quirks & SDHCI_QUIRK_NO_LED)
+ return;
+
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
ctrl |= SDHCI_CTRL_LED;
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
@@ -358,6 +361,9 @@ static void __sdhci_led_deactivate(struct sdhci_host *host)
{
u8 ctrl;
+ if (host->quirks & SDHCI_QUIRK_NO_LED)
+ return;
+
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
ctrl &= ~SDHCI_CTRL_LED;
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
@@ -387,6 +393,9 @@ static int sdhci_led_register(struct sdhci_host *host)
{
struct mmc_host *mmc = host->mmc;
+ if (host->quirks & SDHCI_QUIRK_NO_LED)
+ return 0;
+
snprintf(host->led_name, sizeof(host->led_name),
"%s::", mmc_hostname(mmc));
@@ -400,6 +409,9 @@ static int sdhci_led_register(struct sdhci_host *host)
static void sdhci_led_unregister(struct sdhci_host *host)
{
+ if (host->quirks & SDHCI_QUIRK_NO_LED)
+ return;
+
led_classdev_unregister(&host->led);
}
@@ -933,6 +945,11 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
else
host->ier = (host->ier & ~dma_irqs) | pio_irqs;
+ if (host->flags & (SDHCI_AUTO_CMD23 | SDHCI_AUTO_CMD12))
+ host->ier |= SDHCI_INT_AUTO_CMD_ERR;
+ else
+ host->ier &= ~SDHCI_INT_AUTO_CMD_ERR;
+
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
}
@@ -1191,8 +1208,7 @@ static bool sdhci_needs_reset(struct sdhci_host *host, struct mmc_request *mrq)
return (!(host->flags & SDHCI_DEVICE_DEAD) &&
((mrq->cmd && mrq->cmd->error) ||
(mrq->sbc && mrq->sbc->error) ||
- (mrq->data && ((mrq->data->error && !mrq->data->stop) ||
- (mrq->data->stop && mrq->data->stop->error))) ||
+ (mrq->data && mrq->data->stop && mrq->data->stop->error) ||
(host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)));
}
@@ -1244,6 +1260,16 @@ static void sdhci_finish_data(struct sdhci_host *host)
host->data = NULL;
host->data_cmd = NULL;
+ /*
+ * The controller needs a reset of internal state machines upon error
+ * conditions.
+ */
+ if (data->error) {
+ if (!host->cmd || host->cmd == data_cmd)
+ sdhci_do_reset(host, SDHCI_RESET_CMD);
+ sdhci_do_reset(host, SDHCI_RESET_DATA);
+ }
+
if ((host->flags & (SDHCI_REQ_USE_DMA | SDHCI_USE_ADMA)) ==
(SDHCI_REQ_USE_DMA | SDHCI_USE_ADMA))
sdhci_adma_table_post(host, data);
@@ -1268,17 +1294,6 @@ static void sdhci_finish_data(struct sdhci_host *host)
if (data->stop &&
(data->error ||
!data->mrq->sbc)) {
-
- /*
- * The controller needs a reset of internal state machines
- * upon error conditions.
- */
- if (data->error) {
- if (!host->cmd || host->cmd == data_cmd)
- sdhci_do_reset(host, SDHCI_RESET_CMD);
- sdhci_do_reset(host, SDHCI_RESET_DATA);
- }
-
/*
* 'cap_cmd_during_tfr' request must not use the command line
* after mmc_command_done() has been called. It is upper layer's
@@ -2757,8 +2772,23 @@ static void sdhci_timeout_data_timer(struct timer_list *t)
* *
\*****************************************************************************/
-static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
+static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p)
{
+ /* Handle auto-CMD12 error */
+ if (intmask & SDHCI_INT_AUTO_CMD_ERR && host->data_cmd) {
+ struct mmc_request *mrq = host->data_cmd->mrq;
+ u16 auto_cmd_status = sdhci_readw(host, SDHCI_AUTO_CMD_STATUS);
+ int data_err_bit = (auto_cmd_status & SDHCI_AUTO_CMD_TIMEOUT) ?
+ SDHCI_INT_DATA_TIMEOUT :
+ SDHCI_INT_DATA_CRC;
+
+ /* Treat auto-CMD12 error the same as data error */
+ if (!mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) {
+ *intmask_p |= data_err_bit;
+ return;
+ }
+ }
+
if (!host->cmd) {
/*
* SDHCI recovers from errors by resetting the cmd and data
@@ -2780,20 +2810,12 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
else
host->cmd->error = -EILSEQ;
- /*
- * If this command initiates a data phase and a response
- * CRC error is signalled, the card can start transferring
- * data - the card may have received the command without
- * error. We must not terminate the mmc_request early.
- *
- * If the card did not receive the command or returned an
- * error which prevented it sending data, the data phase
- * will time out.
- */
+ /* Treat data command CRC error the same as data CRC error */
if (host->cmd->data &&
(intmask & (SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)) ==
SDHCI_INT_CRC) {
host->cmd = NULL;
+ *intmask_p |= SDHCI_INT_DATA_CRC;
return;
}
@@ -2801,6 +2823,21 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
return;
}
+ /* Handle auto-CMD23 error */
+ if (intmask & SDHCI_INT_AUTO_CMD_ERR) {
+ struct mmc_request *mrq = host->cmd->mrq;
+ u16 auto_cmd_status = sdhci_readw(host, SDHCI_AUTO_CMD_STATUS);
+ int err = (auto_cmd_status & SDHCI_AUTO_CMD_TIMEOUT) ?
+ -ETIMEDOUT :
+ -EILSEQ;
+
+ if (mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
+ mrq->sbc->error = err;
+ sdhci_finish_mrq(host, mrq);
+ return;
+ }
+ }
+
if (intmask & SDHCI_INT_RESPONSE)
sdhci_finish_command(host);
}
@@ -3021,7 +3058,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
}
if (intmask & SDHCI_INT_CMD_MASK)
- sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
+ sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK, &intmask);
if (intmask & SDHCI_INT_DATA_MASK)
sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
@@ -3541,7 +3578,7 @@ void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps, u32 *caps1)
}
EXPORT_SYMBOL_GPL(__sdhci_read_caps);
-static int sdhci_allocate_bounce_buffer(struct sdhci_host *host)
+static void sdhci_allocate_bounce_buffer(struct sdhci_host *host)
{
struct mmc_host *mmc = host->mmc;
unsigned int max_blocks;
@@ -3579,7 +3616,7 @@ static int sdhci_allocate_bounce_buffer(struct sdhci_host *host)
* Exiting with zero here makes sure we proceed with
* mmc->max_segs == 1.
*/
- return 0;
+ return;
}
host->bounce_addr = dma_map_single(mmc->parent,
@@ -3589,7 +3626,7 @@ static int sdhci_allocate_bounce_buffer(struct sdhci_host *host)
ret = dma_mapping_error(mmc->parent, host->bounce_addr);
if (ret)
/* Again fall back to max_segs == 1 */
- return 0;
+ return;
host->bounce_buffer_size = bounce_size;
/* Lie about this since we're bouncing */
@@ -3599,8 +3636,6 @@ static int sdhci_allocate_bounce_buffer(struct sdhci_host *host)
pr_info("%s bounce up to %u segments into one, max segment size %u bytes\n",
mmc_hostname(mmc), max_blocks, bounce_size);
-
- return 0;
}
static inline bool sdhci_can_64bit_dma(struct sdhci_host *host)
@@ -4134,12 +4169,9 @@ int sdhci_setup_host(struct sdhci_host *host)
*/
mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
- if (mmc->max_segs == 1) {
+ if (mmc->max_segs == 1)
/* This may alter mmc->*_blk_* parameters */
- ret = sdhci_allocate_bounce_buffer(host);
- if (ret)
- return ret;
- }
+ sdhci_allocate_bounce_buffer(host);
return 0;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index b001cf4d3d7e..6cc9a3c2ac66 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -146,14 +146,15 @@
#define SDHCI_INT_DATA_CRC 0x00200000
#define SDHCI_INT_DATA_END_BIT 0x00400000
#define SDHCI_INT_BUS_POWER 0x00800000
-#define SDHCI_INT_ACMD12ERR 0x01000000
+#define SDHCI_INT_AUTO_CMD_ERR 0x01000000
#define SDHCI_INT_ADMA_ERROR 0x02000000
#define SDHCI_INT_NORMAL_MASK 0x00007FFF
#define SDHCI_INT_ERROR_MASK 0xFFFF8000
#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
- SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
+ SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX | \
+ SDHCI_INT_AUTO_CMD_ERR)
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
@@ -168,7 +169,11 @@
#define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE)
-#define SDHCI_ACMD12_ERR 0x3C
+#define SDHCI_AUTO_CMD_STATUS 0x3C
+#define SDHCI_AUTO_CMD_TIMEOUT 0x00000002
+#define SDHCI_AUTO_CMD_CRC 0x00000004
+#define SDHCI_AUTO_CMD_END_BIT 0x00000008
+#define SDHCI_AUTO_CMD_INDEX 0x00000010
#define SDHCI_HOST_CONTROL2 0x3E
#define SDHCI_CTRL_UHS_MASK 0x0007
@@ -403,6 +408,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
/* Controller does not like fast PIO transfers */
#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
+/* Controller does not have a LED */
+#define SDHCI_QUIRK_NO_LED (1<<19)
/* Controller has to be forced to use block size of 2048 bytes */
#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
/* Controller cannot do multi-block transfers */
diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
new file mode 100644
index 000000000000..8c05879850a0
--- /dev/null
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * sdhci_am654.c - SDHCI driver for TI's AM654 SOCs
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com
+ *
+ */
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include "sdhci-pltfm.h"
+
+/* CTL_CFG Registers */
+#define CTL_CFG_2 0x14
+
+#define SLOTTYPE_MASK GENMASK(31, 30)
+#define SLOTTYPE_EMBEDDED BIT(30)
+
+/* PHY Registers */
+#define PHY_CTRL1 0x100
+#define PHY_CTRL2 0x104
+#define PHY_CTRL3 0x108
+#define PHY_CTRL4 0x10C
+#define PHY_CTRL5 0x110
+#define PHY_CTRL6 0x114
+#define PHY_STAT1 0x130
+#define PHY_STAT2 0x134
+
+#define IOMUX_ENABLE_SHIFT 31
+#define IOMUX_ENABLE_MASK BIT(IOMUX_ENABLE_SHIFT)
+#define OTAPDLYENA_SHIFT 20
+#define OTAPDLYENA_MASK BIT(OTAPDLYENA_SHIFT)
+#define OTAPDLYSEL_SHIFT 12
+#define OTAPDLYSEL_MASK GENMASK(15, 12)
+#define STRBSEL_SHIFT 24
+#define STRBSEL_MASK GENMASK(27, 24)
+#define SEL50_SHIFT 8
+#define SEL50_MASK BIT(SEL50_SHIFT)
+#define SEL100_SHIFT 9
+#define SEL100_MASK BIT(SEL100_SHIFT)
+#define DLL_TRIM_ICP_SHIFT 4
+#define DLL_TRIM_ICP_MASK GENMASK(7, 4)
+#define DR_TY_SHIFT 20
+#define DR_TY_MASK GENMASK(22, 20)
+#define ENDLL_SHIFT 1
+#define ENDLL_MASK BIT(ENDLL_SHIFT)
+#define DLLRDY_SHIFT 0
+#define DLLRDY_MASK BIT(DLLRDY_SHIFT)
+#define PDB_SHIFT 0
+#define PDB_MASK BIT(PDB_SHIFT)
+#define CALDONE_SHIFT 1
+#define CALDONE_MASK BIT(CALDONE_SHIFT)
+#define RETRIM_SHIFT 17
+#define RETRIM_MASK BIT(RETRIM_SHIFT)
+
+#define DRIVER_STRENGTH_50_OHM 0x0
+#define DRIVER_STRENGTH_33_OHM 0x1
+#define DRIVER_STRENGTH_66_OHM 0x2
+#define DRIVER_STRENGTH_100_OHM 0x3
+#define DRIVER_STRENGTH_40_OHM 0x4
+
+#define CLOCK_TOO_SLOW_HZ 400000
+
+static struct regmap_config sdhci_am654_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .fast_io = true,
+};
+
+struct sdhci_am654_data {
+ struct regmap *base;
+ int otap_del_sel;
+ int trm_icp;
+ int drv_strength;
+ bool dll_on;
+};
+
+static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
+ int sel50, sel100;
+ u32 mask, val;
+ int ret;
+
+ if (sdhci_am654->dll_on) {
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
+ ENDLL_MASK, 0);
+
+ sdhci_am654->dll_on = false;
+ }
+
+ sdhci_set_clock(host, clock);
+
+ if (clock > CLOCK_TOO_SLOW_HZ) {
+ /* Setup DLL Output TAP delay */
+ mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
+ val = (1 << OTAPDLYENA_SHIFT) |
+ (sdhci_am654->otap_del_sel << OTAPDLYSEL_SHIFT);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4,
+ mask, val);
+ switch (clock) {
+ case 200000000:
+ sel50 = 0;
+ sel100 = 0;
+ break;
+ case 100000000:
+ sel50 = 0;
+ sel100 = 1;
+ break;
+ default:
+ sel50 = 1;
+ sel100 = 0;
+ }
+
+ /* Configure PHY DLL frequency */
+ mask = SEL50_MASK | SEL100_MASK;
+ val = (sel50 << SEL50_SHIFT) | (sel100 << SEL100_SHIFT);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL5,
+ mask, val);
+ /* Configure DLL TRIM */
+ mask = DLL_TRIM_ICP_MASK;
+ val = sdhci_am654->trm_icp << DLL_TRIM_ICP_SHIFT;
+
+ /* Configure DLL driver strength */
+ mask |= DR_TY_MASK;
+ val |= sdhci_am654->drv_strength << DR_TY_SHIFT;
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
+ mask, val);
+ /* Enable DLL */
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
+ ENDLL_MASK, 0x1 << ENDLL_SHIFT);
+ /*
+ * Poll for DLL ready. Use a one second timeout.
+ * Works in all experiments done so far
+ */
+ ret = regmap_read_poll_timeout(sdhci_am654->base,
+ PHY_STAT1, val,
+ val & DLLRDY_MASK,
+ 1000, 1000000);
+
+ sdhci_am654->dll_on = true;
+ }
+}
+
+static void sdhci_am654_set_power(struct sdhci_host *host, unsigned char mode,
+ unsigned short vdd)
+{
+ if (!IS_ERR(host->mmc->supply.vmmc)) {
+ struct mmc_host *mmc = host->mmc;
+
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ }
+ sdhci_set_power_noreg(host, mode, vdd);
+}
+
+struct sdhci_ops sdhci_am654_ops = {
+ .get_max_clock = sdhci_pltfm_clk_get_max_clock,
+ .get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_bus_width = sdhci_set_bus_width,
+ .set_power = sdhci_am654_set_power,
+ .set_clock = sdhci_am654_set_clock,
+ .reset = sdhci_reset,
+};
+
+static const struct sdhci_pltfm_data sdhci_am654_pdata = {
+ .ops = &sdhci_am654_ops,
+ .quirks = SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
+ SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+};
+
+static int sdhci_am654_init(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
+ u32 ctl_cfg_2 = 0;
+ u32 mask;
+ u32 val;
+ int ret;
+
+ /* Reset OTAP to default value */
+ mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4,
+ mask, 0x0);
+
+ regmap_read(sdhci_am654->base, PHY_STAT1, &val);
+ if (~val & CALDONE_MASK) {
+ /* Calibrate IO lines */
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
+ PDB_MASK, PDB_MASK);
+ ret = regmap_read_poll_timeout(sdhci_am654->base, PHY_STAT1,
+ val, val & CALDONE_MASK, 1, 20);
+ if (ret)
+ return ret;
+ }
+
+ /* Enable pins by setting IO mux to 0 */
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
+ IOMUX_ENABLE_MASK, 0);
+
+ /* Set slot type based on SD or eMMC */
+ if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+ ctl_cfg_2 = SLOTTYPE_EMBEDDED;
+
+ regmap_update_bits(sdhci_am654->base, CTL_CFG_2,
+ ctl_cfg_2, SLOTTYPE_MASK);
+
+ return sdhci_add_host(host);
+}
+
+static int sdhci_am654_get_of_property(struct platform_device *pdev,
+ struct sdhci_am654_data *sdhci_am654)
+{
+ struct device *dev = &pdev->dev;
+ int drv_strength;
+ int ret;
+
+ ret = device_property_read_u32(dev, "ti,trm-icp",
+ &sdhci_am654->trm_icp);
+ if (ret)
+ return ret;
+
+ ret = device_property_read_u32(dev, "ti,otap-del-sel",
+ &sdhci_am654->otap_del_sel);
+ if (ret)
+ return ret;
+
+ ret = device_property_read_u32(dev, "ti,driver-strength-ohm",
+ &drv_strength);
+ if (ret)
+ return ret;
+
+ switch (drv_strength) {
+ case 50:
+ sdhci_am654->drv_strength = DRIVER_STRENGTH_50_OHM;
+ break;
+ case 33:
+ sdhci_am654->drv_strength = DRIVER_STRENGTH_33_OHM;
+ break;
+ case 66:
+ sdhci_am654->drv_strength = DRIVER_STRENGTH_66_OHM;
+ break;
+ case 100:
+ sdhci_am654->drv_strength = DRIVER_STRENGTH_100_OHM;
+ break;
+ case 40:
+ sdhci_am654->drv_strength = DRIVER_STRENGTH_40_OHM;
+ break;
+ default:
+ dev_err(dev, "Invalid driver strength\n");
+ return -EINVAL;
+ }
+
+ sdhci_get_of_property(pdev);
+
+ return 0;
+}
+
+static int sdhci_am654_probe(struct platform_device *pdev)
+{
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_am654_data *sdhci_am654;
+ struct sdhci_host *host;
+ struct resource *res;
+ struct clk *clk_xin;
+ struct device *dev = &pdev->dev;
+ void __iomem *base;
+ int ret;
+
+ host = sdhci_pltfm_init(pdev, &sdhci_am654_pdata, sizeof(*sdhci_am654));
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ pltfm_host = sdhci_priv(host);
+ sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
+
+ clk_xin = devm_clk_get(dev, "clk_xin");
+ if (IS_ERR(clk_xin)) {
+ dev_err(dev, "clk_xin clock not found.\n");
+ ret = PTR_ERR(clk_xin);
+ goto err_pltfm_free;
+ }
+
+ pltfm_host->clk = clk_xin;
+
+ /* Clocks are enabled using pm_runtime */
+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(dev);
+ goto pm_runtime_disable;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base)) {
+ ret = PTR_ERR(base);
+ goto pm_runtime_put;
+ }
+
+ sdhci_am654->base = devm_regmap_init_mmio(dev, base,
+ &sdhci_am654_regmap_config);
+ if (IS_ERR(sdhci_am654->base)) {
+ dev_err(dev, "Failed to initialize regmap\n");
+ ret = PTR_ERR(sdhci_am654->base);
+ goto pm_runtime_put;
+ }
+
+ ret = sdhci_am654_get_of_property(pdev, sdhci_am654);
+ if (ret)
+ goto pm_runtime_put;
+
+ ret = mmc_of_parse(host->mmc);
+ if (ret) {
+ dev_err(dev, "parsing dt failed (%d)\n", ret);
+ goto pm_runtime_put;
+ }
+
+ ret = sdhci_am654_init(host);
+ if (ret)
+ goto pm_runtime_put;
+
+ return 0;
+
+pm_runtime_put:
+ pm_runtime_put_sync(dev);
+pm_runtime_disable:
+ pm_runtime_disable(dev);
+err_pltfm_free:
+ sdhci_pltfm_free(pdev);
+ return ret;
+}
+
+static int sdhci_am654_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ int ret;
+
+ sdhci_remove_host(host, true);
+ ret = pm_runtime_put_sync(&pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ pm_runtime_disable(&pdev->dev);
+ sdhci_pltfm_free(pdev);
+
+ return 0;
+}
+
+static const struct of_device_id sdhci_am654_of_match[] = {
+ { .compatible = "ti,am654-sdhci-5.1" },
+ { /* sentinel */ }
+};
+
+static struct platform_driver sdhci_am654_driver = {
+ .driver = {
+ .name = "sdhci-am654",
+ .of_match_table = sdhci_am654_of_match,
+ },
+ .probe = sdhci_am654_probe,
+ .remove = sdhci_am654_remove,
+};
+
+module_platform_driver(sdhci_am654_driver);
+
+MODULE_DESCRIPTION("Driver for SDHCI Controller on TI's AM654 devices");
+MODULE_AUTHOR("Faiz Abbas <faiz_abbas@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 1e317027bf53..c03529e3f01a 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -70,6 +70,7 @@
#define TMIO_STAT_DAT0 BIT(23) /* only known on R-Car so far */
#define TMIO_STAT_RXRDY BIT(24)
#define TMIO_STAT_TXRQ BIT(25)
+#define TMIO_STAT_ALWAYS_SET_27 BIT(27) /* only known on R-Car 2+ so far */
#define TMIO_STAT_ILL_FUNC BIT(29) /* only when !TMIO_MMC_HAS_IDLE_WAIT */
#define TMIO_STAT_SCLKDIVEN BIT(29) /* only when TMIO_MMC_HAS_IDLE_WAIT */
#define TMIO_STAT_CMD_BUSY BIT(30)
@@ -96,6 +97,7 @@
/* Define some IRQ masks */
/* This is the mask used at reset by the chip */
+#define TMIO_MASK_INIT_RCAR2 0x8b7f031d /* Initial value for R-Car Gen2+ */
#define TMIO_MASK_ALL 0x837f031d
#define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND)
#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND)
@@ -153,6 +155,7 @@ struct tmio_mmc_host {
u32 sdcard_irq_mask;
u32 sdio_irq_mask;
unsigned int clk_cache;
+ u32 sdcard_irq_setbit_mask;
spinlock_t lock; /* protect host private data */
unsigned long last_req_ts;
@@ -267,6 +270,9 @@ static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
static inline void sd_ctrl_write32_as_16_and_16(struct tmio_mmc_host *host,
int addr, u32 val)
{
+ if (addr == CTL_IRQ_MASK || addr == CTL_STATUS)
+ val |= host->sdcard_irq_setbit_mask;
+
iowrite16(val & 0xffff, host->ctl + (addr << host->bus_shift));
iowrite16(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
}
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 8d64f6196f33..085a0fab769c 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -171,6 +171,18 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host)
}
}
+static void tmio_mmc_hw_reset(struct mmc_host *mmc)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+
+ host->reset(host);
+
+ tmio_mmc_abort_dma(host);
+
+ if (host->hw_reset)
+ host->hw_reset(host);
+}
+
static void tmio_mmc_reset_work(struct work_struct *work)
{
struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
@@ -209,12 +221,11 @@ static void tmio_mmc_reset_work(struct work_struct *work)
spin_unlock_irqrestore(&host->lock, flags);
- host->reset(host);
+ tmio_mmc_hw_reset(host->mmc);
/* Ready for new calls */
host->mrq = NULL;
- tmio_mmc_abort_dma(host);
mmc_request_done(host->mmc, mrq);
}
@@ -696,14 +707,6 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
return 0;
}
-static void tmio_mmc_hw_reset(struct mmc_host *mmc)
-{
- struct tmio_mmc_host *host = mmc_priv(mmc);
-
- if (host->hw_reset)
- host->hw_reset(host);
-}
-
static int tmio_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
struct tmio_mmc_host *host = mmc_priv(mmc);
@@ -734,8 +737,6 @@ static int tmio_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
ret = mmc_send_tuning(mmc, opcode, NULL);
if (ret == 0)
set_bit(i, host->taps);
-
- usleep_range(1000, 1200);
}
ret = host->select_tuning(host);
@@ -1167,11 +1168,13 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
if (ret < 0)
return ret;
- if (pdata->flags & TMIO_MMC_USE_GPIO_CD) {
- ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio, 0);
- if (ret)
- return ret;
- }
+ /*
+ * Look for a card detect GPIO, if it fails with anything
+ * else than a probe deferral, just live without it.
+ */
+ ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+ if (ret == -EPROBE_DEFER)
+ return ret;
mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
mmc->caps2 |= pdata->capabilities2;
@@ -1228,7 +1231,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
_host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
_host->set_clock(_host, 0);
- _host->reset(_host);
+ tmio_mmc_hw_reset(mmc);
_host->sdcard_irq_mask = sd_ctrl_read16_and_16_as_32(_host, CTL_IRQ_MASK);
tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
@@ -1328,8 +1331,8 @@ int tmio_mmc_host_runtime_resume(struct device *dev)
{
struct tmio_mmc_host *host = dev_get_drvdata(dev);
- host->reset(host);
tmio_mmc_clk_enable(host);
+ tmio_mmc_hw_reset(host->mmc);
if (host->clk_cache)
host->set_clock(host, host->clk_cache);