diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 283 |
1 files changed, 0 insertions, 283 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index b686dab54ec6..c877f4114e04 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -237,22 +237,6 @@ config MACB source "drivers/net/arm/Kconfig" -config AX88796 - tristate "ASIX AX88796 NE2000 clone support" - depends on ARM || MIPS || SUPERH - select PHYLIB - select MDIO_BITBANG - help - AX88796 driver, using platform bus to provide - chip detection and resources - -config AX88796_93CX6 - bool "ASIX AX88796 external 93CX6 eeprom support" - depends on AX88796 - select EEPROM_93CX6 - help - Select this if your platform comes with an external 93CX6 eeprom. - config MACE tristate "MACE (Power Mac ethernet) support" depends on PPC_PMAC && PPC32 @@ -287,50 +271,6 @@ config BMAC To compile this driver as a module, choose M here: the module will be called bmac. -config HYDRA - tristate "Hydra support" - depends on ZORRO - select CRC32 - help - If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. - - To compile this driver as a module, choose M here: the module - will be called hydra. - -config ZORRO8390 - tristate "Zorro NS8390-based Ethernet support" - depends on ZORRO - select CRC32 - help - This driver is for Zorro Ethernet cards using an NS8390-compatible - chipset, like the Village Tronic Ariadne II and the Individual - Computers X-Surf Ethernet cards. If you have such a card, say Y. - Otherwise, say N. - - To compile this driver as a module, choose M here: the module - will be called zorro8390. - -config APNE - tristate "PCMCIA NE2000 support" - depends on AMIGA_PCMCIA - select CRC32 - help - If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, - say N. - - To compile this driver as a module, choose M here: the module - will be called apne. - -config MAC8390 - bool "Macintosh NS 8390 based ethernet cards" - depends on MAC - select CRC32 - help - If you want to include a driver to support Nubus or LC-PDS - Ethernet cards using an NS8390 chipset or its equivalent, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - config MAC89x0 tristate "Macintosh CS89x0 based ethernet cards" depends on MAC @@ -449,18 +389,6 @@ config SGI_O2MACE_ETH tristate "SGI O2 MACE Fast Ethernet support" depends on SGI_IP32=y -config STNIC - tristate "National DP83902AV support" - depends on SUPERH - select CRC32 - help - Support for cards based on the National Semiconductor DP83902AV - ST-NIC Serial Network Interface Controller for Twisted Pair. This - is a 10Mbit/sec Ethernet controller. Product overview and specs at - <http://www.national.com/pf/DP/DP83902A.html>. - - If unsure, say N. - config SH_ETH tristate "Renesas SuperH Ethernet support" depends on SUPERH && \ @@ -591,74 +519,6 @@ config ELMC_II To compile this driver as a module, choose M here. The module will be called 3c527. -config NET_VENDOR_SMC - bool "Western Digital/SMC cards" - depends on ISA || MCA || EISA || MAC - help - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about Western Digital cards. If you say Y, you will be - asked for your specific card in the following questions. - -config WD80x3 - tristate "WD80*3 support" - depends on NET_VENDOR_SMC && ISA - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called wd. - -config ULTRAMCA - tristate "SMC Ultra MCA support" - depends on NET_VENDOR_SMC && MCA - select CRC32 - help - If you have a network (Ethernet) card of this type and are running - an MCA based system (PS/2), say Y and read the Ethernet-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called smc-mca. - -config ULTRA - tristate "SMC Ultra support" - depends on NET_VENDOR_SMC && ISA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - Important: There have been many reports that, with some motherboards - mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, - such as some BusLogic models) causes corruption problems with many - operating systems. The Linux smc-ultra driver has a work-around for - this but keep it in mind if you have such a SCSI card and have - problems. - - To compile this driver as a module, choose M here. The module - will be called smc-ultra. - -config ULTRA32 - tristate "SMC Ultra32 EISA support" - depends on NET_VENDOR_SMC && EISA - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called smc-ultra32. - config BFIN_MAC tristate "Blackfin on-chip MAC support" depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537) @@ -979,18 +839,6 @@ config NET_ISA the remaining ISA network card questions. If you say Y, you will be asked for your specific card in the following questions. -config E2100 - tristate "Cabletron E21xx support" - depends on NET_ISA - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called e2100. - config EWRK3 tristate "EtherWORKS 3 (DE203, DE204, DE205) support" depends on NET_ISA @@ -1032,30 +880,6 @@ config EEXPRESS_PRO To compile this driver as a module, choose M here. The module will be called eepro. -config HPLAN_PLUS - tristate "HP PCLAN+ (27247B and 27252A) support" - depends on NET_ISA - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called hp-plus. - -config HPLAN - tristate "HP PCLAN (27245 and other 27xxx series) support" - depends on NET_ISA - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called hp. - config LP486E tristate "LP486E on board Ethernet" depends on NET_ISA @@ -1075,26 +899,6 @@ config ETH16I To compile this driver as a module, choose M here. The module will be called eth16i. -config NE2000 - tristate "NE2000/NE1000 support" - depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Many Ethernet cards - without a specific driver are compatible with NE2000. - - If you have a PCI NE2000 card however, say N here and Y to "PCI - NE2000 and clone support" under "EISA, VLB, PCI and on board - controllers" below. If you have a NE2000 card and are running on - an MCA system (a bus system used on some IBM PS/2 computers and - laptops), say N here and Y to "NE/2 (ne2000 MCA version) support", - below. - - To compile this driver as a module, choose M here. The module - will be called ne. - config ZNET tristate "Zenith Z-Note support (EXPERIMENTAL)" depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API @@ -1116,18 +920,6 @@ config SEEQ8005 To compile this driver as a module, choose M here. The module will be called seeq8005. -config NE2_MCA - tristate "NE/2 (ne2000 MCA version) support" - depends on MCA_LEGACY - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called ne2. - config IBMLANA tristate "IBM LAN Adapter/A support" depends on MCA @@ -1183,18 +975,6 @@ config ADAPTEC_STARFIRE To compile this driver as a module, choose M here: the module will be called starfire. This is recommended. -config AC3200 - tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)" - depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called ac3200. - config KSZ884X_PCI tristate "Micrel KSZ8841/2 PCI" depends on NET_PCI && PCI @@ -1310,18 +1090,6 @@ config E100 To compile this driver as a module, choose M here. The module will be called e100. -config LNE390 - tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)" - depends on NET_PCI && EISA && EXPERIMENTAL - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called lne390. - config FEALNX tristate "Myson MTD-8xx PCI Ethernet support" depends on NET_PCI && PCI @@ -1342,50 +1110,6 @@ config NATSEMI More specific information and updates are available from <http://www.scyld.com/network/natsemi.html>. -config NE2K_PCI - tristate "PCI NE2000 and clones support (see help)" - depends on NET_PCI && PCI - select CRC32 - ---help--- - This driver is for NE2000 compatible PCI cards. It will not work - with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 - support" below). If you have a PCI NE2000 network (Ethernet) card, - say Y and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - This driver also works for the following NE2000 clone cards: - RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 - NetVin NV5000SC Via 86C926 SureCom NE34 Winbond - Holtek HT80232 Holtek HT80229 - - To compile this driver as a module, choose M here. The module - will be called ne2k-pci. - -config NE3210 - tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)" - depends on NET_PCI && EISA && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Note that this driver - will NOT WORK for NE3200 cards as they are completely different. - - To compile this driver as a module, choose M here. The module - will be called ne3210. - -config ES3210 - tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)" - depends on NET_PCI && EISA && EXPERIMENTAL - select CRC32 - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called es3210. - config 8139CP tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)" depends on NET_PCI && PCI && EXPERIMENTAL @@ -1723,13 +1447,6 @@ config FEC_MPC52xx_MDIO If not sure, enable. If compiled as module, it will be called fec_mpc52xx_phy. -config NE_H8300 - tristate "NE2000 compatible support for H8/300" - depends on H8300 - help - Say Y here if you want to use the NE2000 compatible - controller on the Renesas H8/300 processor. - config ATL2 tristate "Atheros L2 Fast Ethernet support" depends on PCI |