summaryrefslogtreecommitdiff
path: root/drivers/net/can
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/can')
-rw-r--r--drivers/net/can/c_can/Kconfig7
-rw-r--r--drivers/net/can/c_can/c_can.c36
-rw-r--r--drivers/net/can/sja1000/peak_pci.c14
3 files changed, 9 insertions, 48 deletions
diff --git a/drivers/net/can/c_can/Kconfig b/drivers/net/can/c_can/Kconfig
index 8ab7103d4f44..61ffc12d8fd8 100644
--- a/drivers/net/can/c_can/Kconfig
+++ b/drivers/net/can/c_can/Kconfig
@@ -14,13 +14,6 @@ config CAN_C_CAN_PLATFORM
SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com)
boards like am335x, dm814x, dm813x and dm811x.
-config CAN_C_CAN_STRICT_FRAME_ORDERING
- bool "Force a strict RX CAN frame order (may cause frame loss)"
- ---help---
- The RX split buffer prevents packet reordering but can cause packet
- loss. Only enable this option when you accept to lose CAN frames
- in favour of getting the received CAN frames in the correct order.
-
config CAN_C_CAN_PCI
tristate "Generic PCI Bus based C_CAN/D_CAN driver"
depends on PCI
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index e154b4cb0f1a..8e78bb48f5a4 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -727,26 +727,12 @@ static u32 c_can_adjust_pending(u32 pend)
static inline void c_can_rx_object_get(struct net_device *dev,
struct c_can_priv *priv, u32 obj)
{
-#ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING
- if (obj < C_CAN_MSG_RX_LOW_LAST)
- c_can_object_get(dev, IF_RX, obj, IF_COMM_RCV_LOW);
- else
-#endif
c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high);
}
static inline void c_can_rx_finalize(struct net_device *dev,
struct c_can_priv *priv, u32 obj)
{
-#ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING
- if (obj < C_CAN_MSG_RX_LOW_LAST)
- priv->rxmasked |= BIT(obj - 1);
- else if (obj == C_CAN_MSG_RX_LOW_LAST) {
- priv->rxmasked = 0;
- /* activate all lower message objects */
- c_can_activate_all_lower_rx_msg_obj(dev, IF_RX);
- }
-#endif
if (priv->type != BOSCH_D_CAN)
c_can_object_get(dev, IF_RX, obj, IF_COMM_CLR_NEWDAT);
}
@@ -794,9 +780,6 @@ static inline u32 c_can_get_pending(struct c_can_priv *priv)
{
u32 pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
-#ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING
- pend &= ~priv->rxmasked;
-#endif
return pend;
}
@@ -809,25 +792,6 @@ static inline u32 c_can_get_pending(struct c_can_priv *priv)
* has arrived. To work-around this issue, we keep two groups of message
* objects whose partitioning is defined by C_CAN_MSG_OBJ_RX_SPLIT.
*
- * If CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING = y
- *
- * To ensure in-order frame reception we use the following
- * approach while re-activating a message object to receive further
- * frames:
- * - if the current message object number is lower than
- * C_CAN_MSG_RX_LOW_LAST, do not clear the NEWDAT bit while clearing
- * the INTPND bit.
- * - if the current message object number is equal to
- * C_CAN_MSG_RX_LOW_LAST then clear the NEWDAT bit of all lower
- * receive message objects.
- * - if the current message object number is greater than
- * C_CAN_MSG_RX_LOW_LAST then clear the NEWDAT bit of
- * only this message object.
- *
- * This can cause packet loss!
- *
- * If CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING = n
- *
* We clear the newdat bit right away.
*
* This can result in packet reordering when the readout is slow.
diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index c540e3d12e3d..564933ae218c 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -551,7 +551,7 @@ static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct sja1000_priv *priv;
struct peak_pci_chan *chan;
- struct net_device *dev;
+ struct net_device *dev, *prev_dev;
void __iomem *cfg_base, *reg_base;
u16 sub_sys_id, icr;
int i, err, channels;
@@ -688,11 +688,13 @@ failure_remove_channels:
writew(0x0, cfg_base + PITA_ICR + 2);
chan = NULL;
- for (dev = pci_get_drvdata(pdev); dev; dev = chan->prev_dev) {
- unregister_sja1000dev(dev);
- free_sja1000dev(dev);
+ for (dev = pci_get_drvdata(pdev); dev; dev = prev_dev) {
priv = netdev_priv(dev);
chan = priv->priv;
+ prev_dev = chan->prev_dev;
+
+ unregister_sja1000dev(dev);
+ free_sja1000dev(dev);
}
/* free any PCIeC resources too */
@@ -726,10 +728,12 @@ static void peak_pci_remove(struct pci_dev *pdev)
/* Loop over all registered devices */
while (1) {
+ struct net_device *prev_dev = chan->prev_dev;
+
dev_info(&pdev->dev, "removing device %s\n", dev->name);
unregister_sja1000dev(dev);
free_sja1000dev(dev);
- dev = chan->prev_dev;
+ dev = prev_dev;
if (!dev) {
/* do that only for first channel */