summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/8390/hp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/8390/hp.c')
-rw-r--r--drivers/net/ethernet/8390/hp.c439
1 files changed, 439 insertions, 0 deletions
diff --git a/drivers/net/ethernet/8390/hp.c b/drivers/net/ethernet/8390/hp.c
new file mode 100644
index 000000000000..18564d4a7c04
--- /dev/null
+++ b/drivers/net/ethernet/8390/hp.c
@@ -0,0 +1,439 @@
+/* hp.c: A HP LAN ethernet driver for linux. */
+/*
+ Written 1993-94 by Donald Becker.
+
+ Copyright 1993 United States Government as represented by the
+ Director, National Security Agency.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ This is a driver for the HP PC-LAN adaptors.
+
+ Sources:
+ The Crynwr packet driver.
+*/
+
+static const char version[] =
+ "hp.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+#include "8390.h"
+
+#define DRV_NAME "hp"
+
+/* A zero-terminated list of I/O addresses to be probed. */
+static unsigned int hppclan_portlist[] __initdata =
+{ 0x300, 0x320, 0x340, 0x280, 0x2C0, 0x200, 0x240, 0};
+
+#define HP_IO_EXTENT 32
+
+#define HP_DATAPORT 0x0c /* "Remote DMA" data port. */
+#define HP_ID 0x07
+#define HP_CONFIGURE 0x08 /* Configuration register. */
+#define HP_RUN 0x01 /* 1 == Run, 0 == reset. */
+#define HP_IRQ 0x0E /* Mask for software-configured IRQ line. */
+#define HP_DATAON 0x10 /* Turn on dataport */
+#define NIC_OFFSET 0x10 /* Offset the 8390 registers. */
+
+#define HP_START_PG 0x00 /* First page of TX buffer */
+#define HP_8BSTOP_PG 0x80 /* Last page +1 of RX ring */
+#define HP_16BSTOP_PG 0xFF /* Same, for 16 bit cards. */
+
+static int hp_probe1(struct net_device *dev, int ioaddr);
+
+static void hp_reset_8390(struct net_device *dev);
+static void hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+ int ring_page);
+static void hp_block_input(struct net_device *dev, int count,
+ struct sk_buff *skb , int ring_offset);
+static void hp_block_output(struct net_device *dev, int count,
+ const unsigned char *buf, int start_page);
+
+static void hp_init_card(struct net_device *dev);
+
+/* The map from IRQ number to HP_CONFIGURE register setting. */
+/* My default is IRQ5 0 1 2 3 4 5 6 7 8 9 10 11 */
+static char irqmap[16] __initdata= { 0, 0, 4, 6, 8,10, 0,14, 0, 4, 2,12,0,0,0,0};
+
+
+/* Probe for an HP LAN adaptor.
+ Also initialize the card and fill in STATION_ADDR with the station
+ address. */
+
+static int __init do_hp_probe(struct net_device *dev)
+{
+ int i;
+ int base_addr = dev->base_addr;
+ int irq = dev->irq;
+
+ if (base_addr > 0x1ff) /* Check a single specified location. */
+ return hp_probe1(dev, base_addr);
+ else if (base_addr != 0) /* Don't probe at all. */
+ return -ENXIO;
+
+ for (i = 0; hppclan_portlist[i]; i++) {
+ if (hp_probe1(dev, hppclan_portlist[i]) == 0)
+ return 0;
+ dev->irq = irq;
+ }
+
+ return -ENODEV;
+}
+
+#ifndef MODULE
+struct net_device * __init hp_probe(int unit)
+{
+ struct net_device *dev = alloc_eip_netdev();
+ int err;
+
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+
+ err = do_hp_probe(dev);
+ if (err)
+ goto out;
+ return dev;
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+#endif
+
+static int __init hp_probe1(struct net_device *dev, int ioaddr)
+{
+ int i, retval, board_id, wordmode;
+ const char *name;
+ static unsigned version_printed;
+
+ if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME))
+ return -EBUSY;
+
+ /* Check for the HP physical address, 08 00 09 xx xx xx. */
+ /* This really isn't good enough: we may pick up HP LANCE boards
+ also! Avoid the lance 0x5757 signature. */
+ if (inb(ioaddr) != 0x08
+ || inb(ioaddr+1) != 0x00
+ || inb(ioaddr+2) != 0x09
+ || inb(ioaddr+14) == 0x57) {
+ retval = -ENODEV;
+ goto out;
+ }
+
+ /* Set up the parameters based on the board ID.
+ If you have additional mappings, please mail them to me -djb. */
+ if ((board_id = inb(ioaddr + HP_ID)) & 0x80) {
+ name = "HP27247";
+ wordmode = 1;
+ } else {
+ name = "HP27250";
+ wordmode = 0;
+ }
+
+ if (ei_debug && version_printed++ == 0)
+ printk(version);
+
+ printk("%s: %s (ID %02x) at %#3x,", dev->name, name, board_id, ioaddr);
+
+ for(i = 0; i < ETHER_ADDR_LEN; i++)
+ dev->dev_addr[i] = inb(ioaddr + i);
+
+ printk(" %pM", dev->dev_addr);
+
+ /* Snarf the interrupt now. Someday this could be moved to open(). */
+ if (dev->irq < 2) {
+ static const int irq_16list[] = { 11, 10, 5, 3, 4, 7, 9, 0};
+ static const int irq_8list[] = { 7, 5, 3, 4, 9, 0};
+ const int *irqp = wordmode ? irq_16list : irq_8list;
+ do {
+ int irq = *irqp;
+ if (request_irq (irq, NULL, 0, "bogus", NULL) != -EBUSY) {
+ unsigned long cookie = probe_irq_on();
+ /* Twinkle the interrupt, and check if it's seen. */
+ outb_p(irqmap[irq] | HP_RUN, ioaddr + HP_CONFIGURE);
+ outb_p( 0x00 | HP_RUN, ioaddr + HP_CONFIGURE);
+ if (irq == probe_irq_off(cookie) /* It's a good IRQ line! */
+ && request_irq (irq, eip_interrupt, 0, DRV_NAME, dev) == 0) {
+ printk(" selecting IRQ %d.\n", irq);
+ dev->irq = *irqp;
+ break;
+ }
+ }
+ } while (*++irqp);
+ if (*irqp == 0) {
+ printk(" no free IRQ lines.\n");
+ retval = -EBUSY;
+ goto out;
+ }
+ } else {
+ if (dev->irq == 2)
+ dev->irq = 9;
+ if ((retval = request_irq(dev->irq, eip_interrupt, 0, DRV_NAME, dev))) {
+ printk (" unable to get IRQ %d.\n", dev->irq);
+ goto out;
+ }
+ }
+
+ /* Set the base address to point to the NIC, not the "real" base! */
+ dev->base_addr = ioaddr + NIC_OFFSET;
+ dev->netdev_ops = &eip_netdev_ops;
+
+ ei_status.name = name;
+ ei_status.word16 = wordmode;
+ ei_status.tx_start_page = HP_START_PG;
+ ei_status.rx_start_page = HP_START_PG + TX_PAGES;
+ ei_status.stop_page = wordmode ? HP_16BSTOP_PG : HP_8BSTOP_PG;
+
+ ei_status.reset_8390 = hp_reset_8390;
+ ei_status.get_8390_hdr = hp_get_8390_hdr;
+ ei_status.block_input = hp_block_input;
+ ei_status.block_output = hp_block_output;
+ hp_init_card(dev);
+
+ retval = register_netdev(dev);
+ if (retval)
+ goto out1;
+ return 0;
+out1:
+ free_irq(dev->irq, dev);
+out:
+ release_region(ioaddr, HP_IO_EXTENT);
+ return retval;
+}
+
+static void
+hp_reset_8390(struct net_device *dev)
+{
+ int hp_base = dev->base_addr - NIC_OFFSET;
+ int saved_config = inb_p(hp_base + HP_CONFIGURE);
+
+ if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies);
+ outb_p(0x00, hp_base + HP_CONFIGURE);
+ ei_status.txing = 0;
+ /* Pause just a few cycles for the hardware reset to take place. */
+ udelay(5);
+
+ outb_p(saved_config, hp_base + HP_CONFIGURE);
+ udelay(5);
+
+ if ((inb_p(hp_base+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0)
+ printk("%s: hp_reset_8390() did not complete.\n", dev->name);
+
+ if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
+}
+
+static void
+hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+ int nic_base = dev->base_addr;
+ int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE);
+
+ outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE);
+ outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base);
+ outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
+ outb_p(0, nic_base + EN0_RCNTHI);
+ outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */
+ outb_p(ring_page, nic_base + EN0_RSARHI);
+ outb_p(E8390_RREAD+E8390_START, nic_base);
+
+ if (ei_status.word16)
+ insw(nic_base - NIC_OFFSET + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
+ else
+ insb(nic_base - NIC_OFFSET + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
+
+ outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
+}
+
+/* Block input and output, similar to the Crynwr packet driver. If you are
+ porting to a new ethercard look at the packet driver source for hints.
+ The HP LAN doesn't use shared memory -- we put the packet
+ out through the "remote DMA" dataport. */
+
+static void
+hp_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+{
+ int nic_base = dev->base_addr;
+ int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE);
+ int xfer_count = count;
+ char *buf = skb->data;
+
+ outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE);
+ outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base);
+ outb_p(count & 0xff, nic_base + EN0_RCNTLO);
+ outb_p(count >> 8, nic_base + EN0_RCNTHI);
+ outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
+ outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
+ outb_p(E8390_RREAD+E8390_START, nic_base);
+ if (ei_status.word16) {
+ insw(nic_base - NIC_OFFSET + HP_DATAPORT,buf,count>>1);
+ if (count & 0x01)
+ buf[count-1] = inb(nic_base - NIC_OFFSET + HP_DATAPORT), xfer_count++;
+ } else {
+ insb(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count);
+ }
+ /* This is for the ALPHA version only, remove for later releases. */
+ if (ei_debug > 0) { /* DMA termination address check... */
+ int high = inb_p(nic_base + EN0_RSARHI);
+ int low = inb_p(nic_base + EN0_RSARLO);
+ int addr = (high << 8) + low;
+ /* Check only the lower 8 bits so we can ignore ring wrap. */
+ if (((ring_offset + xfer_count) & 0xff) != (addr & 0xff))
+ printk("%s: RX transfer address mismatch, %#4.4x vs. %#4.4x (actual).\n",
+ dev->name, ring_offset + xfer_count, addr);
+ }
+ outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
+}
+
+static void
+hp_block_output(struct net_device *dev, int count,
+ const unsigned char *buf, int start_page)
+{
+ int nic_base = dev->base_addr;
+ int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE);
+
+ outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE);
+ /* Round the count up for word writes. Do we need to do this?
+ What effect will an odd byte count have on the 8390?
+ I should check someday. */
+ if (ei_status.word16 && (count & 0x01))
+ count++;
+ /* We should already be in page 0, but to be safe... */
+ outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base);
+
+#ifdef NE8390_RW_BUGFIX
+ /* Handle the read-before-write bug the same way as the
+ Crynwr packet driver -- the NatSemi method doesn't work. */
+ outb_p(0x42, nic_base + EN0_RCNTLO);
+ outb_p(0, nic_base + EN0_RCNTHI);
+ outb_p(0xff, nic_base + EN0_RSARLO);
+ outb_p(0x00, nic_base + EN0_RSARHI);
+#define NE_CMD 0x00
+ outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD);
+ /* Make certain that the dummy read has occurred. */
+ inb_p(0x61);
+ inb_p(0x61);
+#endif
+
+ outb_p(count & 0xff, nic_base + EN0_RCNTLO);
+ outb_p(count >> 8, nic_base + EN0_RCNTHI);
+ outb_p(0x00, nic_base + EN0_RSARLO);
+ outb_p(start_page, nic_base + EN0_RSARHI);
+
+ outb_p(E8390_RWRITE+E8390_START, nic_base);
+ if (ei_status.word16) {
+ /* Use the 'rep' sequence for 16 bit boards. */
+ outsw(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count>>1);
+ } else {
+ outsb(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count);
+ }
+
+ /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here -- it's broken! */
+
+ /* This is for the ALPHA version only, remove for later releases. */
+ if (ei_debug > 0) { /* DMA termination address check... */
+ int high = inb_p(nic_base + EN0_RSARHI);
+ int low = inb_p(nic_base + EN0_RSARLO);
+ int addr = (high << 8) + low;
+ if ((start_page << 8) + count != addr)
+ printk("%s: TX Transfer address mismatch, %#4.4x vs. %#4.4x.\n",
+ dev->name, (start_page << 8) + count, addr);
+ }
+ outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
+}
+
+/* This function resets the ethercard if something screws up. */
+static void __init
+hp_init_card(struct net_device *dev)
+{
+ int irq = dev->irq;
+ NS8390p_init(dev, 0);
+ outb_p(irqmap[irq&0x0f] | HP_RUN,
+ dev->base_addr - NIC_OFFSET + HP_CONFIGURE);
+}
+
+#ifdef MODULE
+#define MAX_HP_CARDS 4 /* Max number of HP cards per module */
+static struct net_device *dev_hp[MAX_HP_CARDS];
+static int io[MAX_HP_CARDS];
+static int irq[MAX_HP_CARDS];
+
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(io, "I/O base address(es)");
+MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
+MODULE_DESCRIPTION("HP PC-LAN ISA ethernet driver");
+MODULE_LICENSE("GPL");
+
+/* This is set up so that only a single autoprobe takes place per call.
+ISA device autoprobes on a running machine are not recommended. */
+int __init
+init_module(void)
+{
+ struct net_device *dev;
+ int this_dev, found = 0;
+
+ for (this_dev = 0; this_dev < MAX_HP_CARDS; this_dev++) {
+ if (io[this_dev] == 0) {
+ if (this_dev != 0) break; /* only autoprobe 1st one */
+ printk(KERN_NOTICE "hp.c: Presently autoprobing (not recommended) for a single card.\n");
+ }
+ dev = alloc_eip_netdev();
+ if (!dev)
+ break;
+ dev->irq = irq[this_dev];
+ dev->base_addr = io[this_dev];
+ if (do_hp_probe(dev) == 0) {
+ dev_hp[found++] = dev;
+ continue;
+ }
+ free_netdev(dev);
+ printk(KERN_WARNING "hp.c: No HP card found (i/o = 0x%x).\n", io[this_dev]);
+ break;
+ }
+ if (found)
+ return 0;
+ return -ENXIO;
+}
+
+static void cleanup_card(struct net_device *dev)
+{
+ free_irq(dev->irq, dev);
+ release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT);
+}
+
+void __exit
+cleanup_module(void)
+{
+ int this_dev;
+
+ for (this_dev = 0; this_dev < MAX_HP_CARDS; this_dev++) {
+ struct net_device *dev = dev_hp[this_dev];
+ if (dev) {
+ unregister_netdev(dev);
+ cleanup_card(dev);
+ free_netdev(dev);
+ }
+ }
+}
+#endif /* MODULE */