diff options
Diffstat (limited to 'drivers/net/phy/at803x.c')
| -rw-r--r-- | drivers/net/phy/at803x.c | 192 |
1 files changed, 176 insertions, 16 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 32af52dd5aed..5d62b85a4024 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -83,8 +83,8 @@ #define AT803X_MODE_CFG_MASK 0x0F #define AT803X_MODE_CFG_SGMII 0x01 -#define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/ -#define AT803X_PSSR_MR_AN_COMPLETE 0x0200 +#define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/ +#define AT803X_PSSR_MR_AN_COMPLETE 0x0200 #define AT803X_DEBUG_REG_0 0x00 #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) @@ -92,10 +92,16 @@ #define AT803X_DEBUG_REG_5 0x05 #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) +#define AT803X_DEBUG_REG_3C 0x3C + +#define AT803X_DEBUG_REG_3D 0x3D + #define AT803X_DEBUG_REG_1F 0x1F #define AT803X_DEBUG_PLL_ON BIT(2) #define AT803X_DEBUG_RGMII_1V8 BIT(3) +#define MDIO_AZ_DEBUG 0x800D + /* AT803x supports either the XTAL input pad, an internal PLL or the * DSP as clock reference for the clock output pad. The XTAL reference * is only used for 25 MHz output, all other frequencies need the PLL. @@ -128,33 +134,59 @@ #define AT803X_CLK_OUT_STRENGTH_HALF 1 #define AT803X_CLK_OUT_STRENGTH_QUARTER 2 -#define AT803X_DEFAULT_DOWNSHIFT 5 -#define AT803X_MIN_DOWNSHIFT 2 -#define AT803X_MAX_DOWNSHIFT 9 +#define AT803X_DEFAULT_DOWNSHIFT 5 +#define AT803X_MIN_DOWNSHIFT 2 +#define AT803X_MAX_DOWNSHIFT 9 #define AT803X_MMD3_SMARTEEE_CTL1 0x805b #define AT803X_MMD3_SMARTEEE_CTL2 0x805c #define AT803X_MMD3_SMARTEEE_CTL3 0x805d #define AT803X_MMD3_SMARTEEE_CTL3_LPI_EN BIT(8) -#define ATH9331_PHY_ID 0x004dd041 -#define ATH8030_PHY_ID 0x004dd076 -#define ATH8031_PHY_ID 0x004dd074 -#define ATH8032_PHY_ID 0x004dd023 -#define ATH8035_PHY_ID 0x004dd072 +#define ATH9331_PHY_ID 0x004dd041 +#define ATH8030_PHY_ID 0x004dd076 +#define ATH8031_PHY_ID 0x004dd074 +#define ATH8032_PHY_ID 0x004dd023 +#define ATH8035_PHY_ID 0x004dd072 #define AT8030_PHY_ID_MASK 0xffffffef -#define AT803X_PAGE_FIBER 0 -#define AT803X_PAGE_COPPER 1 +#define QCA8327_PHY_ID 0x004dd034 +#define QCA8337_PHY_ID 0x004dd036 +#define QCA8K_PHY_ID_MASK 0xffffffff + +#define QCA8K_DEVFLAGS_REVISION_MASK GENMASK(2, 0) + +#define AT803X_PAGE_FIBER 0 +#define AT803X_PAGE_COPPER 1 + +/* don't turn off internal PLL */ +#define AT803X_KEEP_PLL_ENABLED BIT(0) +#define AT803X_DISABLE_SMARTEEE BIT(1) MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver"); MODULE_AUTHOR("Matus Ujhelyi"); MODULE_LICENSE("GPL"); +enum stat_access_type { + PHY, + MMD +}; + +struct at803x_hw_stat { + const char *string; + u8 reg; + u32 mask; + enum stat_access_type access_type; +}; + +static struct at803x_hw_stat at803x_hw_stats[] = { + { "phy_idle_errors", 0xa, GENMASK(7, 0), PHY}, + { "phy_receive_errors", 0x15, GENMASK(15, 0), PHY}, + { "eee_wake_errors", 0x16, GENMASK(15, 0), MMD}, +}; + struct at803x_priv { int flags; -#define AT803X_KEEP_PLL_ENABLED BIT(0) /* don't turn off internal PLL */ -#define AT803X_DISABLE_SMARTEEE BIT(1) u16 clk_25m_reg; u16 clk_25m_mask; u8 smarteee_lpi_tw_1g; @@ -162,6 +194,7 @@ struct at803x_priv { struct regulator_dev *vddio_rdev; struct regulator_dev *vddh_rdev; struct regulator *vddio; + u64 stats[ARRAY_SIZE(at803x_hw_stats)]; }; struct at803x_context { @@ -173,6 +206,17 @@ struct at803x_context { u16 led_control; }; +static int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data) +{ + int ret; + + ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg); + if (ret < 0) + return ret; + + return phy_write(phydev, AT803X_DEBUG_DATA, data); +} + static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg) { int ret; @@ -335,6 +379,53 @@ static void at803x_get_wol(struct phy_device *phydev, wol->wolopts |= WAKE_MAGIC; } +static int at803x_get_sset_count(struct phy_device *phydev) +{ + return ARRAY_SIZE(at803x_hw_stats); +} + +static void at803x_get_strings(struct phy_device *phydev, u8 *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++) { + strscpy(data + i * ETH_GSTRING_LEN, + at803x_hw_stats[i].string, ETH_GSTRING_LEN); + } +} + +static u64 at803x_get_stat(struct phy_device *phydev, int i) +{ + struct at803x_hw_stat stat = at803x_hw_stats[i]; + struct at803x_priv *priv = phydev->priv; + int val; + u64 ret; + + if (stat.access_type == MMD) + val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg); + else + val = phy_read(phydev, stat.reg); + + if (val < 0) { + ret = U64_MAX; + } else { + val = val & stat.mask; + priv->stats[i] += val; + ret = priv->stats[i]; + } + + return ret; +} + +static void at803x_get_stats(struct phy_device *phydev, + struct ethtool_stats *stats, u64 *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++) + data[i] = at803x_get_stat(phydev, i); +} + static int at803x_suspend(struct phy_device *phydev) { int value; @@ -610,6 +701,34 @@ static void at803x_remove(struct phy_device *phydev) regulator_disable(priv->vddio); } +static int at803x_get_features(struct phy_device *phydev) +{ + int err; + + err = genphy_read_abilities(phydev); + if (err) + return err; + + if (!at803x_match_phy_id(phydev, ATH8031_PHY_ID)) + return 0; + + /* AR8031/AR8033 have different status registers + * for copper and fiber operation. However, the + * extended status register is the same for both + * operation modes. + * + * As a result of that, ESTATUS_1000_XFULL is set + * to 1 even when operating in copper TP mode. + * + * Remove this mode from the supported link modes, + * as this driver currently only supports copper + * operation. + */ + linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->supported); + return 0; +} + static int at803x_smarteee_config(struct phy_device *phydev) { struct at803x_priv *priv = phydev->priv; @@ -1170,6 +1289,34 @@ static int at803x_cable_test_start(struct phy_device *phydev) return 0; } +static int qca83xx_config_init(struct phy_device *phydev) +{ + u8 switch_revision; + + switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK; + + switch (switch_revision) { + case 1: + /* For 100M waveform */ + at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_0, 0x02ea); + /* Turn on Gigabit clock */ + at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x68a0); + break; + + case 2: + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0); + fallthrough; + case 4: + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f); + at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x6860); + at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_5, 0x2c46); + at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000); + break; + } + + return 0; +} + static struct phy_driver at803x_driver[] = { { /* Qualcomm Atheros AR8035 */ @@ -1225,7 +1372,7 @@ static struct phy_driver at803x_driver[] = { .resume = at803x_resume, .read_page = at803x_read_page, .write_page = at803x_write_page, - /* PHY_GBIT_FEATURES */ + .get_features = at803x_get_features, .read_status = at803x_read_status, .config_intr = &at803x_config_intr, .handle_interrupt = at803x_handle_interrupt, @@ -1266,7 +1413,20 @@ static struct phy_driver at803x_driver[] = { .read_status = at803x_read_status, .soft_reset = genphy_soft_reset, .config_aneg = at803x_config_aneg, -} }; +}, { + /* QCA8337 */ + .phy_id = QCA8337_PHY_ID, + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "QCA PHY 8337", + /* PHY_GBIT_FEATURES */ + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, + .soft_reset = genphy_soft_reset, + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, +}, }; module_phy_driver(at803x_driver); |