summaryrefslogtreecommitdiff
path: root/drivers/nfc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/nfc')
-rw-r--r--drivers/nfc/Kconfig1
-rw-r--r--drivers/nfc/Makefile1
-rw-r--r--drivers/nfc/pn544/i2c.c154
-rw-r--r--drivers/nfc/port100.c36
-rw-r--r--drivers/nfc/st21nfca/Kconfig23
-rw-r--r--drivers/nfc/st21nfca/Makefile8
-rw-r--r--drivers/nfc/st21nfca/i2c.c724
-rw-r--r--drivers/nfc/st21nfca/st21nfca.c698
-rw-r--r--drivers/nfc/st21nfca/st21nfca.h87
-rw-r--r--drivers/nfc/trf7970a.c261
10 files changed, 1905 insertions, 88 deletions
diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig
index 65d4ca19d132..26c66a126551 100644
--- a/drivers/nfc/Kconfig
+++ b/drivers/nfc/Kconfig
@@ -71,5 +71,6 @@ config NFC_PORT100
source "drivers/nfc/pn544/Kconfig"
source "drivers/nfc/microread/Kconfig"
source "drivers/nfc/nfcmrvl/Kconfig"
+source "drivers/nfc/st21nfca/Kconfig"
endmenu
diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile
index ae42a3fa60c9..23225b0287fd 100644
--- a/drivers/nfc/Makefile
+++ b/drivers/nfc/Makefile
@@ -11,5 +11,6 @@ obj-$(CONFIG_NFC_SIM) += nfcsim.o
obj-$(CONFIG_NFC_PORT100) += port100.o
obj-$(CONFIG_NFC_MRVL) += nfcmrvl/
obj-$(CONFIG_NFC_TRF7970A) += trf7970a.o
+obj-$(CONFIG_NFC_ST21NFCA) += st21nfca/
ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG
diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c
index f2acd85be86e..440291ab7263 100644
--- a/drivers/nfc/pn544/i2c.c
+++ b/drivers/nfc/pn544/i2c.c
@@ -22,6 +22,8 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
#include <linux/miscdevice.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
@@ -857,6 +859,92 @@ exit_state_wait_secure_write_answer:
}
}
+#ifdef CONFIG_OF
+
+static int pn544_hci_i2c_of_request_resources(struct i2c_client *client)
+{
+ struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
+ struct device_node *pp;
+ int ret;
+
+ pp = client->dev.of_node;
+ if (!pp) {
+ ret = -ENODEV;
+ goto err_dt;
+ }
+
+ /* Obtention of EN GPIO from device tree */
+ ret = of_get_named_gpio(pp, "enable-gpios", 0);
+ if (ret < 0) {
+ if (ret != -EPROBE_DEFER)
+ nfc_err(&client->dev,
+ "Failed to get EN gpio, error: %d\n", ret);
+ goto err_dt;
+ }
+ phy->gpio_en = ret;
+
+ /* Configuration of EN GPIO */
+ ret = gpio_request(phy->gpio_en, "pn544_en");
+ if (ret) {
+ nfc_err(&client->dev, "Fail EN pin\n");
+ goto err_dt;
+ }
+ ret = gpio_direction_output(phy->gpio_en, 0);
+ if (ret) {
+ nfc_err(&client->dev, "Fail EN pin direction\n");
+ goto err_gpio_en;
+ }
+
+ /* Obtention of FW GPIO from device tree */
+ ret = of_get_named_gpio(pp, "firmware-gpios", 0);
+ if (ret < 0) {
+ if (ret != -EPROBE_DEFER)
+ nfc_err(&client->dev,
+ "Failed to get FW gpio, error: %d\n", ret);
+ goto err_gpio_en;
+ }
+ phy->gpio_fw = ret;
+
+ /* Configuration of FW GPIO */
+ ret = gpio_request(phy->gpio_fw, "pn544_fw");
+ if (ret) {
+ nfc_err(&client->dev, "Fail FW pin\n");
+ goto err_gpio_en;
+ }
+ ret = gpio_direction_output(phy->gpio_fw, 0);
+ if (ret) {
+ nfc_err(&client->dev, "Fail FW pin direction\n");
+ goto err_gpio_fw;
+ }
+
+ /* IRQ */
+ ret = irq_of_parse_and_map(pp, 0);
+ if (ret < 0) {
+ nfc_err(&client->dev,
+ "Unable to get irq, error: %d\n", ret);
+ goto err_gpio_fw;
+ }
+ client->irq = ret;
+
+ return 0;
+
+err_gpio_fw:
+ gpio_free(phy->gpio_fw);
+err_gpio_en:
+ gpio_free(phy->gpio_en);
+err_dt:
+ return ret;
+}
+
+#else
+
+static int pn544_hci_i2c_of_request_resources(struct i2c_client *client)
+{
+ return -ENODEV;
+}
+
+#endif
+
static int pn544_hci_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -887,25 +975,36 @@ static int pn544_hci_i2c_probe(struct i2c_client *client,
i2c_set_clientdata(client, phy);
pdata = client->dev.platform_data;
- if (pdata == NULL) {
- nfc_err(&client->dev, "No platform data\n");
- return -EINVAL;
- }
- if (pdata->request_resources == NULL) {
- nfc_err(&client->dev, "request_resources() missing\n");
- return -EINVAL;
- }
+ /* No platform data, using device tree. */
+ if (!pdata && client->dev.of_node) {
+ r = pn544_hci_i2c_of_request_resources(client);
+ if (r) {
+ nfc_err(&client->dev, "No DT data\n");
+ return r;
+ }
+ /* Using platform data. */
+ } else if (pdata) {
- r = pdata->request_resources(client);
- if (r) {
- nfc_err(&client->dev, "Cannot get platform resources\n");
- return r;
- }
+ if (pdata->request_resources == NULL) {
+ nfc_err(&client->dev, "request_resources() missing\n");
+ return -EINVAL;
+ }
- phy->gpio_en = pdata->get_gpio(NFC_GPIO_ENABLE);
- phy->gpio_fw = pdata->get_gpio(NFC_GPIO_FW_RESET);
- phy->gpio_irq = pdata->get_gpio(NFC_GPIO_IRQ);
+ r = pdata->request_resources(client);
+ if (r) {
+ nfc_err(&client->dev,
+ "Cannot get platform resources\n");
+ return r;
+ }
+
+ phy->gpio_en = pdata->get_gpio(NFC_GPIO_ENABLE);
+ phy->gpio_fw = pdata->get_gpio(NFC_GPIO_FW_RESET);
+ phy->gpio_irq = pdata->get_gpio(NFC_GPIO_IRQ);
+ } else {
+ nfc_err(&client->dev, "No platform data\n");
+ return -EINVAL;
+ }
pn544_hci_i2c_platform_init(phy);
@@ -930,8 +1029,12 @@ err_hci:
free_irq(client->irq, phy);
err_rti:
- if (pdata->free_resources != NULL)
+ if (!pdata) {
+ gpio_free(phy->gpio_en);
+ gpio_free(phy->gpio_fw);
+ } else if (pdata->free_resources) {
pdata->free_resources();
+ }
return r;
}
@@ -953,15 +1056,30 @@ static int pn544_hci_i2c_remove(struct i2c_client *client)
pn544_hci_i2c_disable(phy);
free_irq(client->irq, phy);
- if (pdata->free_resources)
+
+ /* No platform data, GPIOs have been requested by this driver */
+ if (!pdata) {
+ gpio_free(phy->gpio_en);
+ gpio_free(phy->gpio_fw);
+ /* Using platform data */
+ } else if (pdata->free_resources) {
pdata->free_resources();
+ }
return 0;
}
+static const struct of_device_id of_pn544_i2c_match[] = {
+ { .compatible = "nxp,pn544-i2c", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_pn544_i2c_match);
+
static struct i2c_driver pn544_hci_i2c_driver = {
.driver = {
.name = PN544_HCI_I2C_DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(of_pn544_i2c_match),
},
.probe = pn544_hci_i2c_probe,
.id_table = pn544_hci_i2c_id_table,
diff --git a/drivers/nfc/port100.c b/drivers/nfc/port100.c
index b7a372af5eb7..4ac4d31f6c59 100644
--- a/drivers/nfc/port100.c
+++ b/drivers/nfc/port100.c
@@ -28,7 +28,8 @@
NFC_PROTO_MIFARE_MASK | \
NFC_PROTO_FELICA_MASK | \
NFC_PROTO_NFC_DEP_MASK | \
- NFC_PROTO_ISO14443_MASK)
+ NFC_PROTO_ISO14443_MASK | \
+ NFC_PROTO_ISO14443_B_MASK)
#define PORT100_CAPABILITIES (NFC_DIGITAL_DRV_CAPS_IN_CRC | \
NFC_DIGITAL_DRV_CAPS_TG_CRC)
@@ -120,6 +121,7 @@ struct port100_in_rf_setting {
#define PORT100_COMM_TYPE_IN_212F 0x01
#define PORT100_COMM_TYPE_IN_424F 0x02
#define PORT100_COMM_TYPE_IN_106A 0x03
+#define PORT100_COMM_TYPE_IN_106B 0x07
static const struct port100_in_rf_setting in_rf_settings[] = {
[NFC_DIGITAL_RF_TECH_212F] = {
@@ -140,6 +142,12 @@ static const struct port100_in_rf_setting in_rf_settings[] = {
.in_recv_set_number = 15,
.in_recv_comm_type = PORT100_COMM_TYPE_IN_106A,
},
+ [NFC_DIGITAL_RF_TECH_106B] = {
+ .in_send_set_number = 3,
+ .in_send_comm_type = PORT100_COMM_TYPE_IN_106B,
+ .in_recv_set_number = 15,
+ .in_recv_comm_type = PORT100_COMM_TYPE_IN_106B,
+ },
/* Ensures the array has NFC_DIGITAL_RF_TECH_LAST elements */
[NFC_DIGITAL_RF_TECH_LAST] = { 0 },
};
@@ -340,6 +348,32 @@ in_protocols[][PORT100_IN_MAX_NUM_PROTOCOLS + 1] = {
[NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED] = {
{ PORT100_IN_PROT_END, 0 },
},
+ [NFC_DIGITAL_FRAMING_NFCB] = {
+ { PORT100_IN_PROT_INITIAL_GUARD_TIME, 20 },
+ { PORT100_IN_PROT_ADD_CRC, 1 },
+ { PORT100_IN_PROT_CHECK_CRC, 1 },
+ { PORT100_IN_PROT_MULTI_CARD, 0 },
+ { PORT100_IN_PROT_ADD_PARITY, 0 },
+ { PORT100_IN_PROT_CHECK_PARITY, 0 },
+ { PORT100_IN_PROT_BITWISE_AC_RECV_MODE, 0 },
+ { PORT100_IN_PROT_VALID_BIT_NUMBER, 8 },
+ { PORT100_IN_PROT_CRYPTO1, 0 },
+ { PORT100_IN_PROT_ADD_SOF, 1 },
+ { PORT100_IN_PROT_CHECK_SOF, 1 },
+ { PORT100_IN_PROT_ADD_EOF, 1 },
+ { PORT100_IN_PROT_CHECK_EOF, 1 },
+ { PORT100_IN_PROT_DEAF_TIME, 4 },
+ { PORT100_IN_PROT_CRM, 0 },
+ { PORT100_IN_PROT_CRM_MIN_LEN, 0 },
+ { PORT100_IN_PROT_T1_TAG_FRAME, 0 },
+ { PORT100_IN_PROT_RFCA, 0 },
+ { PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 },
+ { PORT100_IN_PROT_END, 0 },
+ },
+ [NFC_DIGITAL_FRAMING_NFCB_T4T] = {
+ /* nfc_digital_framing_nfcb */
+ { PORT100_IN_PROT_END, 0 },
+ },
/* Ensures the array has NFC_DIGITAL_FRAMING_LAST elements */
[NFC_DIGITAL_FRAMING_LAST] = {
{ PORT100_IN_PROT_END, 0 },
diff --git a/drivers/nfc/st21nfca/Kconfig b/drivers/nfc/st21nfca/Kconfig
new file mode 100644
index 000000000000..ee459f066ade
--- /dev/null
+++ b/drivers/nfc/st21nfca/Kconfig
@@ -0,0 +1,23 @@
+config NFC_ST21NFCA
+ tristate "STMicroelectronics ST21NFCA NFC driver"
+ depends on NFC_HCI
+ select CRC_CCITT
+ default n
+ ---help---
+ STMicroelectronics ST21NFCA core driver. It implements the chipset
+ HCI logic and hooks into the NFC kernel APIs. Physical layers will
+ register against it.
+
+ To compile this driver as a module, choose m here. The module will
+ be called st21nfca.
+ Say N if unsure.
+
+config NFC_ST21NFCA_I2C
+ tristate "NFC ST21NFCA i2c support"
+ depends on NFC_ST21NFCA && I2C && NFC_SHDLC
+ ---help---
+ This module adds support for the STMicroelectronics st21nfca i2c interface.
+ Select this if your platform is using the i2c bus.
+
+ If you choose to build a module, it'll be called st21nfca_i2c.
+ Say N if unsure.
diff --git a/drivers/nfc/st21nfca/Makefile b/drivers/nfc/st21nfca/Makefile
new file mode 100644
index 000000000000..038ed093a119
--- /dev/null
+++ b/drivers/nfc/st21nfca/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for ST21NFCA HCI based NFC driver
+#
+
+st21nfca_i2c-objs = i2c.o
+
+obj-$(CONFIG_NFC_ST21NFCA) += st21nfca.o
+obj-$(CONFIG_NFC_ST21NFCA_I2C) += st21nfca_i2c.o
diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c
new file mode 100644
index 000000000000..3f954ed86d98
--- /dev/null
+++ b/drivers/nfc/st21nfca/i2c.c
@@ -0,0 +1,724 @@
+/*
+ * I2C Link Layer for ST21NFCA HCI based Driver
+ * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/crc-ccitt.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/nfc.h>
+#include <linux/firmware.h>
+#include <linux/unaligned/access_ok.h>
+#include <linux/platform_data/st21nfca.h>
+
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+#include <net/nfc/nfc.h>
+
+#include "st21nfca.h"
+
+/*
+ * Every frame starts with ST21NFCA_SOF_EOF and ends with ST21NFCA_SOF_EOF.
+ * Because ST21NFCA_SOF_EOF is a possible data value, there is a mecanism
+ * called byte stuffing has been introduced.
+ *
+ * if byte == ST21NFCA_SOF_EOF or ST21NFCA_ESCAPE_BYTE_STUFFING
+ * - insert ST21NFCA_ESCAPE_BYTE_STUFFING (escape byte)
+ * - xor byte with ST21NFCA_BYTE_STUFFING_MASK
+ */
+#define ST21NFCA_SOF_EOF 0x7e
+#define ST21NFCA_BYTE_STUFFING_MASK 0x20
+#define ST21NFCA_ESCAPE_BYTE_STUFFING 0x7d
+
+/* SOF + 00 */
+#define ST21NFCA_FRAME_HEADROOM 2
+
+/* 2 bytes crc + EOF */
+#define ST21NFCA_FRAME_TAILROOM 3
+#define IS_START_OF_FRAME(buf) (buf[0] == ST21NFCA_SOF_EOF && \
+ buf[1] == 0)
+
+#define ST21NFCA_HCI_I2C_DRIVER_NAME "st21nfca_hci_i2c"
+
+static struct i2c_device_id st21nfca_hci_i2c_id_table[] = {
+ {ST21NFCA_HCI_DRIVER_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, st21nfca_hci_i2c_id_table);
+
+struct st21nfca_i2c_phy {
+ struct i2c_client *i2c_dev;
+ struct nfc_hci_dev *hdev;
+
+ unsigned int gpio_ena;
+ unsigned int gpio_irq;
+ unsigned int irq_polarity;
+
+ struct sk_buff *pending_skb;
+ int current_read_len;
+ /*
+ * crc might have fail because i2c macro
+ * is disable due to other interface activity
+ */
+ int crc_trials;
+
+ int powered;
+ int run_mode;
+
+ /*
+ * < 0 if hardware error occured (e.g. i2c err)
+ * and prevents normal operation.
+ */
+ int hard_fault;
+ struct mutex phy_lock;
+};
+static u8 len_seq[] = { 13, 24, 15, 29 };
+static u16 wait_tab[] = { 2, 3, 5, 15, 20, 40};
+
+#define I2C_DUMP_SKB(info, skb) \
+do { \
+ pr_debug("%s:\n", info); \
+ print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \
+ 16, 1, (skb)->data, (skb)->len, 0); \
+} while (0)
+
+/*
+ * In order to get the CLF in a known state we generate an internal reboot
+ * using a proprietary command.
+ * Once the reboot is completed, we expect to receive a ST21NFCA_SOF_EOF
+ * fill buffer.
+ */
+static int st21nfca_hci_platform_init(struct st21nfca_i2c_phy *phy)
+{
+ u16 wait_reboot[] = { 50, 300, 1000 };
+ char reboot_cmd[] = { 0x7E, 0x66, 0x48, 0xF6, 0x7E };
+ u8 tmp[ST21NFCA_HCI_LLC_MAX_SIZE];
+ int i, r = -1;
+
+ for (i = 0; i < ARRAY_SIZE(wait_reboot) && r < 0; i++) {
+ r = i2c_master_send(phy->i2c_dev, reboot_cmd,
+ sizeof(reboot_cmd));
+ if (r < 0)
+ msleep(wait_reboot[i]);
+ }
+ if (r < 0)
+ return r;
+
+ /* CLF is spending about 20ms to do an internal reboot */
+ msleep(20);
+ r = -1;
+ for (i = 0; i < ARRAY_SIZE(wait_reboot) && r < 0; i++) {
+ r = i2c_master_recv(phy->i2c_dev, tmp,
+ ST21NFCA_HCI_LLC_MAX_SIZE);
+ if (r < 0)
+ msleep(wait_reboot[i]);
+ }
+ if (r < 0)
+ return r;
+
+ for (i = 0; i < ST21NFCA_HCI_LLC_MAX_SIZE &&
+ tmp[i] == ST21NFCA_SOF_EOF; i++)
+ ;
+
+ if (r != ST21NFCA_HCI_LLC_MAX_SIZE)
+ return -ENODEV;
+
+ usleep_range(1000, 1500);
+ return 0;
+}
+
+static int st21nfca_hci_i2c_enable(void *phy_id)
+{
+ struct st21nfca_i2c_phy *phy = phy_id;
+
+ gpio_set_value(phy->gpio_ena, 1);
+ phy->powered = 1;
+ phy->run_mode = ST21NFCA_HCI_MODE;
+
+ usleep_range(10000, 15000);
+
+ return 0;
+}
+
+static void st21nfca_hci_i2c_disable(void *phy_id)
+{
+ struct st21nfca_i2c_phy *phy = phy_id;
+
+ pr_info("\n");
+ gpio_set_value(phy->gpio_ena, 0);
+
+ phy->powered = 0;
+}
+
+static void st21nfca_hci_add_len_crc(struct sk_buff *skb)
+{
+ u16 crc;
+ u8 tmp;
+
+ *skb_push(skb, 1) = 0;
+
+ crc = crc_ccitt(0xffff, skb->data, skb->len);
+ crc = ~crc;
+
+ tmp = crc & 0x00ff;
+ *skb_put(skb, 1) = tmp;
+
+ tmp = (crc >> 8) & 0x00ff;
+ *skb_put(skb, 1) = tmp;
+}
+
+static void st21nfca_hci_remove_len_crc(struct sk_buff *skb)
+{
+ skb_pull(skb, ST21NFCA_FRAME_HEADROOM);
+ skb_trim(skb, skb->len - ST21NFCA_FRAME_TAILROOM);
+}
+
+/*
+ * Writing a frame must not return the number of written bytes.
+ * It must return either zero for success, or <0 for error.
+ * In addition, it must not alter the skb
+ */
+static int st21nfca_hci_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+ int r = -1, i, j;
+ struct st21nfca_i2c_phy *phy = phy_id;
+ struct i2c_client *client = phy->i2c_dev;
+ u8 tmp[ST21NFCA_HCI_LLC_MAX_SIZE * 2];
+
+ I2C_DUMP_SKB("st21nfca_hci_i2c_write", skb);
+
+
+ if (phy->hard_fault != 0)
+ return phy->hard_fault;
+
+ /*
+ * Compute CRC before byte stuffing computation on frame
+ * Note st21nfca_hci_add_len_crc is doing a byte stuffing
+ * on its own value
+ */
+ st21nfca_hci_add_len_crc(skb);
+
+ /* add ST21NFCA_SOF_EOF on tail */
+ *skb_put(skb, 1) = ST21NFCA_SOF_EOF;
+ /* add ST21NFCA_SOF_EOF on head */
+ *skb_push(skb, 1) = ST21NFCA_SOF_EOF;
+
+ /*
+ * Compute byte stuffing
+ * if byte == ST21NFCA_SOF_EOF or ST21NFCA_ESCAPE_BYTE_STUFFING
+ * insert ST21NFCA_ESCAPE_BYTE_STUFFING (escape byte)
+ * xor byte with ST21NFCA_BYTE_STUFFING_MASK
+ */
+ tmp[0] = skb->data[0];
+ for (i = 1, j = 1; i < skb->len - 1; i++, j++) {
+ if (skb->data[i] == ST21NFCA_SOF_EOF
+ || skb->data[i] == ST21NFCA_ESCAPE_BYTE_STUFFING) {
+ tmp[j] = ST21NFCA_ESCAPE_BYTE_STUFFING;
+ j++;
+ tmp[j] = skb->data[i] ^ ST21NFCA_BYTE_STUFFING_MASK;
+ } else {
+ tmp[j] = skb->data[i];
+ }
+ }
+ tmp[j] = skb->data[i];
+ j++;
+
+ /*
+ * Manage sleep mode
+ * Try 3 times to send data with delay between each
+ */
+ mutex_lock(&phy->phy_lock);
+ for (i = 0; i < ARRAY_SIZE(wait_tab) && r < 0; i++) {
+ r = i2c_master_send(client, tmp, j);
+ if (r < 0)
+ msleep(wait_tab[i]);
+ }
+ mutex_unlock(&phy->phy_lock);
+
+ if (r >= 0) {
+ if (r != j)
+ r = -EREMOTEIO;
+ else
+ r = 0;
+ }
+
+ st21nfca_hci_remove_len_crc(skb);
+
+ return r;
+}
+
+static int get_frame_size(u8 *buf, int buflen)
+{
+ int len = 0;
+ if (buf[len + 1] == ST21NFCA_SOF_EOF)
+ return 0;
+
+ for (len = 1; len < buflen && buf[len] != ST21NFCA_SOF_EOF; len++)
+ ;
+
+ return len;
+}
+
+static int check_crc(u8 *buf, int buflen)
+{
+ u16 crc;
+
+ crc = crc_ccitt(0xffff, buf, buflen - 2);
+ crc = ~crc;
+
+ if (buf[buflen - 2] != (crc & 0xff) || buf[buflen - 1] != (crc >> 8)) {
+ pr_err(ST21NFCA_HCI_DRIVER_NAME
+ ": CRC error 0x%x != 0x%x 0x%x\n", crc, buf[buflen - 1],
+ buf[buflen - 2]);
+
+ pr_info(DRIVER_DESC ": %s : BAD CRC\n", __func__);
+ print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE,
+ 16, 2, buf, buflen, false);
+ return -EPERM;
+ }
+ return 0;
+}
+
+/*
+ * Prepare received data for upper layer.
+ * Received data include byte stuffing, crc and sof/eof
+ * which is not usable by hci part.
+ * returns:
+ * frame size without sof/eof, header and byte stuffing
+ * -EBADMSG : frame was incorrect and discarded
+ */
+static int st21nfca_hci_i2c_repack(struct sk_buff *skb)
+{
+ int i, j, r, size;
+ if (skb->len < 1 || (skb->len > 1 && skb->data[1] != 0))
+ return -EBADMSG;
+
+ size = get_frame_size(skb->data, skb->len);
+ if (size > 0) {
+ skb_trim(skb, size);
+ /* remove ST21NFCA byte stuffing for upper layer */
+ for (i = 1, j = 0; i < skb->len; i++) {
+ if (skb->data[i + j] ==
+ (u8) ST21NFCA_ESCAPE_BYTE_STUFFING) {
+ skb->data[i] = skb->data[i + j + 1]
+ | ST21NFCA_BYTE_STUFFING_MASK;
+ i++;
+ j++;
+ }
+ skb->data[i] = skb->data[i + j];
+ }
+ /* remove byte stuffing useless byte */
+ skb_trim(skb, i - j);
+ /* remove ST21NFCA_SOF_EOF from head */
+ skb_pull(skb, 1);
+
+ r = check_crc(skb->data, skb->len);
+ if (r != 0) {
+ i = 0;
+ return -EBADMSG;
+ }
+
+ /* remove headbyte */
+ skb_pull(skb, 1);
+ /* remove crc. Byte Stuffing is already removed here */
+ skb_trim(skb, skb->len - 2);
+ return skb->len;
+ }
+ return 0;
+}
+
+/*
+ * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees
+ * that i2c bus will be flushed and that next read will start on a new frame.
+ * returned skb contains only LLC header and payload.
+ * returns:
+ * frame size : if received frame is complete (find ST21NFCA_SOF_EOF at
+ * end of read)
+ * -EAGAIN : if received frame is incomplete (not find ST21NFCA_SOF_EOF
+ * at end of read)
+ * -EREMOTEIO : i2c read error (fatal)
+ * -EBADMSG : frame was incorrect and discarded
+ * (value returned from st21nfca_hci_i2c_repack)
+ * -EIO : if no ST21NFCA_SOF_EOF is found after reaching
+ * the read length end sequence
+ */
+static int st21nfca_hci_i2c_read(struct st21nfca_i2c_phy *phy,
+ struct sk_buff *skb)
+{
+ int r, i;
+ u8 len;
+ u8 buf[ST21NFCA_HCI_LLC_MAX_PAYLOAD];
+ struct i2c_client *client = phy->i2c_dev;
+
+ if (phy->current_read_len < ARRAY_SIZE(len_seq)) {
+ len = len_seq[phy->current_read_len];
+
+ /*
+ * Add retry mecanism
+ * Operation on I2C interface may fail in case of operation on
+ * RF or SWP interface
+ */
+ r = 0;
+ mutex_lock(&phy->phy_lock);
+ for (i = 0; i < ARRAY_SIZE(wait_tab) && r <= 0; i++) {
+ r = i2c_master_recv(client, buf, len);
+ if (r < 0)
+ msleep(wait_tab[i]);
+ }
+ mutex_unlock(&phy->phy_lock);
+
+ if (r != len) {
+ phy->current_read_len = 0;
+ return -EREMOTEIO;
+ }
+
+ /*
+ * The first read sequence does not start with SOF.
+ * Data is corrupeted so we drop it.
+ */
+ if (!phy->current_read_len && buf[0] != ST21NFCA_SOF_EOF) {
+ skb_trim(skb, 0);
+ phy->current_read_len = 0;
+ return -EIO;
+ } else if (phy->current_read_len &&
+ IS_START_OF_FRAME(buf)) {
+ /*
+ * Previous frame transmission was interrupted and
+ * the frame got repeated.
+ * Received frame start with ST21NFCA_SOF_EOF + 00.
+ */
+ skb_trim(skb, 0);
+ phy->current_read_len = 0;
+ }
+
+ memcpy(skb_put(skb, len), buf, len);
+
+ if (skb->data[skb->len - 1] == ST21NFCA_SOF_EOF) {
+ phy->current_read_len = 0;
+ return st21nfca_hci_i2c_repack(skb);
+ }
+ phy->current_read_len++;
+ return -EAGAIN;
+ }
+ return -EIO;
+}
+
+/*
+ * Reads an shdlc frame from the chip. This is not as straightforward as it
+ * seems. The frame format is data-crc, and corruption can occur anywhere
+ * while transiting on i2c bus, such that we could read an invalid data.
+ * The tricky case is when we read a corrupted data or crc. We must detect
+ * this here in order to determine that data can be transmitted to the hci
+ * core. This is the reason why we check the crc here.
+ * The CLF will repeat a frame until we send a RR on that frame.
+ *
+ * On ST21NFCA, IRQ goes in idle when read starts. As no size information are
+ * available in the incoming data, other IRQ might come. Every IRQ will trigger
+ * a read sequence with different length and will fill the current frame.
+ * The reception is complete once we reach a ST21NFCA_SOF_EOF.
+ */
+static irqreturn_t st21nfca_hci_irq_thread_fn(int irq, void *phy_id)
+{
+ struct st21nfca_i2c_phy *phy = phy_id;
+ struct i2c_client *client;
+
+ int r;
+
+ if (!phy || irq != phy->i2c_dev->irq) {
+ WARN_ON_ONCE(1);
+ return IRQ_NONE;
+ }
+
+ client = phy->i2c_dev;
+ dev_dbg(&client->dev, "IRQ\n");
+
+ if (phy->hard_fault != 0)
+ return IRQ_HANDLED;
+
+ r = st21nfca_hci_i2c_read(phy, phy->pending_skb);
+ if (r == -EREMOTEIO) {
+ phy->hard_fault = r;
+
+ nfc_hci_recv_frame(phy->hdev, NULL);
+
+ return IRQ_HANDLED;
+ } else if (r == -EAGAIN || r == -EIO) {
+ return IRQ_HANDLED;
+ } else if (r == -EBADMSG && phy->crc_trials < ARRAY_SIZE(wait_tab)) {
+ /*
+ * With ST21NFCA, only one interface (I2C, RF or SWP)
+ * may be active at a time.
+ * Having incorrect crc is usually due to i2c macrocell
+ * deactivation in the middle of a transmission.
+ * It may generate corrupted data on i2c.
+ * We give sometime to get i2c back.
+ * The complete frame will be repeated.
+ */
+ msleep(wait_tab[phy->crc_trials]);
+ phy->crc_trials++;
+ phy->current_read_len = 0;
+ kfree_skb(phy->pending_skb);
+ } else if (r > 0) {
+ /*
+ * We succeeded to read data from the CLF and
+ * data is valid.
+ * Reset counter.
+ */
+ nfc_hci_recv_frame(phy->hdev, phy->pending_skb);
+ phy->crc_trials = 0;
+ }
+
+ phy->pending_skb = alloc_skb(ST21NFCA_HCI_LLC_MAX_SIZE * 2, GFP_KERNEL);
+ if (phy->pending_skb == NULL) {
+ phy->hard_fault = -ENOMEM;
+ nfc_hci_recv_frame(phy->hdev, NULL);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct nfc_phy_ops i2c_phy_ops = {
+ .write = st21nfca_hci_i2c_write,
+ .enable = st21nfca_hci_i2c_enable,
+ .disable = st21nfca_hci_i2c_disable,
+};
+
+#ifdef CONFIG_OF
+static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
+{
+ struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
+ struct device_node *pp;
+ int gpio;
+ int r;
+
+ pp = client->dev.of_node;
+ if (!pp)
+ return -ENODEV;
+
+ /* Get GPIO from device tree */
+ gpio = of_get_named_gpio(pp, "enable-gpios", 0);
+ if (gpio < 0) {
+ nfc_err(&client->dev, "Failed to retrieve enable-gpios from device tree\n");
+ return gpio;
+ }
+
+ /* GPIO request and configuration */
+ r = devm_gpio_request(&client->dev, gpio, "clf_enable");
+ if (r) {
+ nfc_err(&client->dev, "Failed to request enable pin\n");
+ return -ENODEV;
+ }
+
+ r = gpio_direction_output(gpio, 1);
+ if (r) {
+ nfc_err(&client->dev, "Failed to set enable pin direction as output\n");
+ return -ENODEV;
+ }
+ phy->gpio_ena = gpio;
+
+ /* IRQ */
+ r = irq_of_parse_and_map(pp, 0);
+ if (r < 0) {
+ nfc_err(&client->dev,
+ "Unable to get irq, error: %d\n", r);
+ return r;
+ }
+
+ phy->irq_polarity = irq_get_trigger_type(r);
+ client->irq = r;
+
+ return 0;
+}
+#else
+static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
+{
+ return -ENODEV;
+}
+#endif
+
+static int st21nfca_hci_i2c_request_resources(struct i2c_client *client)
+{
+ struct st21nfca_nfc_platform_data *pdata;
+ struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
+ int r;
+ int irq;
+
+ pdata = client->dev.platform_data;
+ if (pdata == NULL) {
+ nfc_err(&client->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
+ /* store for later use */
+ phy->gpio_irq = pdata->gpio_irq;
+ phy->gpio_ena = pdata->gpio_ena;
+ phy->irq_polarity = pdata->irq_polarity;
+
+ r = devm_gpio_request(&client->dev, phy->gpio_irq, "wake_up");
+ if (r) {
+ pr_err("%s : gpio_request failed\n", __FILE__);
+ return -ENODEV;
+ }
+
+ r = gpio_direction_input(phy->gpio_irq);
+ if (r) {
+ pr_err("%s : gpio_direction_input failed\n", __FILE__);
+ return -ENODEV;
+ }
+
+ if (phy->gpio_ena > 0) {
+ r = devm_gpio_request(&client->dev,
+ phy->gpio_ena, "clf_enable");
+ if (r) {
+ pr_err("%s : ena gpio_request failed\n", __FILE__);
+ return -ENODEV;
+ }
+ r = gpio_direction_output(phy->gpio_ena, 1);
+
+ if (r) {
+ pr_err("%s : ena gpio_direction_output failed\n",
+ __FILE__);
+ return -ENODEV;
+ }
+ }
+
+ /* IRQ */
+ irq = gpio_to_irq(phy->gpio_irq);
+ if (irq < 0) {
+ nfc_err(&client->dev,
+ "Unable to get irq number for GPIO %d error %d\n",
+ phy->gpio_irq, r);
+ return -ENODEV;
+ }
+ client->irq = irq;
+
+ return 0;
+}
+
+static int st21nfca_hci_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct st21nfca_i2c_phy *phy;
+ struct st21nfca_nfc_platform_data *pdata;
+ int r;
+
+ dev_dbg(&client->dev, "%s\n", __func__);
+ dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
+ return -ENODEV;
+ }
+
+ phy = devm_kzalloc(&client->dev, sizeof(struct st21nfca_i2c_phy),
+ GFP_KERNEL);
+ if (!phy) {
+ nfc_err(&client->dev,
+ "Cannot allocate memory for st21nfca i2c phy.\n");
+ return -ENOMEM;
+ }
+
+ phy->i2c_dev = client;
+ phy->pending_skb = alloc_skb(ST21NFCA_HCI_LLC_MAX_SIZE * 2, GFP_KERNEL);
+ if (phy->pending_skb == NULL)
+ return -ENOMEM;
+
+ phy->current_read_len = 0;
+ phy->crc_trials = 0;
+ mutex_init(&phy->phy_lock);
+ i2c_set_clientdata(client, phy);
+
+ pdata = client->dev.platform_data;
+ if (!pdata && client->dev.of_node) {
+ r = st21nfca_hci_i2c_of_request_resources(client);
+ if (r) {
+ nfc_err(&client->dev, "No platform data\n");
+ return r;
+ }
+ } else if (pdata) {
+ r = st21nfca_hci_i2c_request_resources(client);
+ if (r) {
+ nfc_err(&client->dev, "Cannot get platform resources\n");
+ return r;
+ }
+ } else {
+ nfc_err(&client->dev, "st21nfca platform resources not available\n");
+ return -ENODEV;
+ }
+
+ r = st21nfca_hci_platform_init(phy);
+ if (r < 0) {
+ nfc_err(&client->dev, "Unable to reboot st21nfca\n");
+ return -ENODEV;
+ }
+
+ r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+ st21nfca_hci_irq_thread_fn,
+ phy->irq_polarity | IRQF_ONESHOT,
+ ST21NFCA_HCI_DRIVER_NAME, phy);
+ if (r < 0) {
+ nfc_err(&client->dev, "Unable to register IRQ handler\n");
+ return r;
+ }
+
+ return st21nfca_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
+ ST21NFCA_FRAME_HEADROOM, ST21NFCA_FRAME_TAILROOM,
+ ST21NFCA_HCI_LLC_MAX_PAYLOAD, &phy->hdev);
+}
+
+static int st21nfca_hci_i2c_remove(struct i2c_client *client)
+{
+ struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
+
+ dev_dbg(&client->dev, "%s\n", __func__);
+
+ st21nfca_hci_remove(phy->hdev);
+
+ if (phy->powered)
+ st21nfca_hci_i2c_disable(phy);
+
+ return 0;
+}
+
+static const struct of_device_id of_st21nfca_i2c_match[] = {
+ { .compatible = "st,st21nfca_i2c", },
+ {}
+};
+
+static struct i2c_driver st21nfca_hci_i2c_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = ST21NFCA_HCI_I2C_DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(of_st21nfca_i2c_match),
+ },
+ .probe = st21nfca_hci_i2c_probe,
+ .id_table = st21nfca_hci_i2c_id_table,
+ .remove = st21nfca_hci_i2c_remove,
+};
+
+module_i2c_driver(st21nfca_hci_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/st21nfca/st21nfca.c b/drivers/nfc/st21nfca/st21nfca.c
new file mode 100644
index 000000000000..51e0f00b3a4f
--- /dev/null
+++ b/drivers/nfc/st21nfca/st21nfca.c
@@ -0,0 +1,698 @@
+/*
+ * HCI based Driver for STMicroelectronics NFC Chip
+ *
+ * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "st21nfca.h"
+
+#define DRIVER_DESC "HCI NFC driver for ST21NFCA"
+
+#define FULL_VERSION_LEN 3
+
+/* Proprietary gates, events, commands and registers */
+
+/* Commands that apply to all RF readers */
+#define ST21NFCA_RF_READER_CMD_PRESENCE_CHECK 0x30
+
+#define ST21NFCA_RF_READER_ISO15693_GATE 0x12
+#define ST21NFCA_RF_READER_ISO15693_INVENTORY 0x01
+
+/*
+ * Reader gate for communication with contact-less cards using Type A
+ * protocol ISO14443-3 but not compliant with ISO14443-4
+ */
+#define ST21NFCA_RF_READER_14443_3_A_GATE 0x15
+#define ST21NFCA_RF_READER_14443_3_A_UID 0x02
+#define ST21NFCA_RF_READER_14443_3_A_ATQA 0x03
+#define ST21NFCA_RF_READER_14443_3_A_SAK 0x04
+
+#define ST21NFCA_DEVICE_MGNT_GATE 0x01
+#define ST21NFCA_DEVICE_MGNT_PIPE 0x02
+
+#define ST21NFCA_DM_GETINFO 0x13
+#define ST21NFCA_DM_GETINFO_PIPE_LIST 0x02
+#define ST21NFCA_DM_GETINFO_PIPE_INFO 0x01
+#define ST21NFCA_DM_PIPE_CREATED 0x02
+#define ST21NFCA_DM_PIPE_OPEN 0x04
+#define ST21NFCA_DM_RF_ACTIVE 0x80
+
+#define ST21NFCA_DM_IS_PIPE_OPEN(p) \
+ ((p & 0x0f) == (ST21NFCA_DM_PIPE_CREATED | ST21NFCA_DM_PIPE_OPEN))
+
+#define ST21NFCA_NFC_MODE 0x03 /* NFC_MODE parameter*/
+
+static DECLARE_BITMAP(dev_mask, ST21NFCA_NUM_DEVICES);
+
+static struct nfc_hci_gate st21nfca_gates[] = {
+ {NFC_HCI_ADMIN_GATE, NFC_HCI_ADMIN_PIPE},
+ {NFC_HCI_LOOPBACK_GATE, NFC_HCI_INVALID_PIPE},
+ {NFC_HCI_ID_MGMT_GATE, NFC_HCI_INVALID_PIPE},
+ {NFC_HCI_LINK_MGMT_GATE, NFC_HCI_LINK_MGMT_PIPE},
+ {NFC_HCI_RF_READER_B_GATE, NFC_HCI_INVALID_PIPE},
+ {NFC_HCI_RF_READER_A_GATE, NFC_HCI_INVALID_PIPE},
+ {ST21NFCA_DEVICE_MGNT_GATE, ST21NFCA_DEVICE_MGNT_PIPE},
+ {ST21NFCA_RF_READER_F_GATE, NFC_HCI_INVALID_PIPE},
+ {ST21NFCA_RF_READER_14443_3_A_GATE, NFC_HCI_INVALID_PIPE},
+ {ST21NFCA_RF_READER_ISO15693_GATE, NFC_HCI_INVALID_PIPE},
+};
+
+struct st21nfca_pipe_info {
+ u8 pipe_state;
+ u8 src_host_id;
+ u8 src_gate_id;
+ u8 dst_host_id;
+ u8 dst_gate_id;
+} __packed;
+
+/* Largest headroom needed for outgoing custom commands */
+#define ST21NFCA_CMDS_HEADROOM 7
+
+static int st21nfca_hci_load_session(struct nfc_hci_dev *hdev)
+{
+ int i, j, r;
+ struct sk_buff *skb_pipe_list, *skb_pipe_info;
+ struct st21nfca_pipe_info *info;
+
+ u8 pipe_list[] = { ST21NFCA_DM_GETINFO_PIPE_LIST,
+ NFC_HCI_TERMINAL_HOST_ID
+ };
+ u8 pipe_info[] = { ST21NFCA_DM_GETINFO_PIPE_INFO,
+ NFC_HCI_TERMINAL_HOST_ID, 0
+ };
+
+ skb_pipe_list = alloc_skb(ST21NFCA_HCI_LLC_MAX_SIZE, GFP_KERNEL);
+ if (!skb_pipe_list) {
+ r = -ENOMEM;
+ goto free_list;
+ }
+
+ skb_pipe_info = alloc_skb(ST21NFCA_HCI_LLC_MAX_SIZE, GFP_KERNEL);
+ if (!skb_pipe_info) {
+ r = -ENOMEM;
+ goto free_info;
+ }
+
+ /* On ST21NFCA device pipes number are dynamics
+ * A maximum of 16 pipes can be created at the same time
+ * If pipes are already created, hci_dev_up will fail.
+ * Doing a clear all pipe is a bad idea because:
+ * - It does useless EEPROM cycling
+ * - It might cause issue for secure elements support
+ * (such as removing connectivity or APDU reader pipe)
+ * A better approach on ST21NFCA is to:
+ * - get a pipe list for each host.
+ * (eg: NFC_HCI_HOST_CONTROLLER_ID for now).
+ * (TODO Later on UICC HOST and eSE HOST)
+ * - get pipe information
+ * - match retrieved pipe list in st21nfca_gates
+ * ST21NFCA_DEVICE_MGNT_GATE is a proprietary gate
+ * with ST21NFCA_DEVICE_MGNT_PIPE.
+ * Pipe can be closed and need to be open.
+ */
+ r = nfc_hci_connect_gate(hdev, NFC_HCI_HOST_CONTROLLER_ID,
+ ST21NFCA_DEVICE_MGNT_GATE, ST21NFCA_DEVICE_MGNT_PIPE);
+ if (r < 0)
+ goto free_info;
+
+ /* Get pipe list */
+ r = nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+ ST21NFCA_DM_GETINFO, pipe_list, sizeof(pipe_list),
+ &skb_pipe_list);
+ if (r < 0)
+ goto free_info;
+
+ /* Complete the existing gate_pipe table */
+ for (i = 0; i < skb_pipe_list->len; i++) {
+ pipe_info[2] = skb_pipe_list->data[i];
+ r = nfc_hci_send_cmd(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+ ST21NFCA_DM_GETINFO, pipe_info,
+ sizeof(pipe_info), &skb_pipe_info);
+
+ if (r)
+ continue;
+
+ /*
+ * Match pipe ID and gate ID
+ * Output format from ST21NFC_DM_GETINFO is:
+ * - pipe state (1byte)
+ * - source hid (1byte)
+ * - source gid (1byte)
+ * - destination hid (1byte)
+ * - destination gid (1byte)
+ */
+ info = (struct st21nfca_pipe_info *) skb_pipe_info->data;
+ for (j = 0; (j < ARRAY_SIZE(st21nfca_gates)) &&
+ (st21nfca_gates[j].gate != info->dst_gate_id);
+ j++)
+ ;
+
+ if (j < ARRAY_SIZE(st21nfca_gates) &&
+ st21nfca_gates[j].gate == info->dst_gate_id &&
+ ST21NFCA_DM_IS_PIPE_OPEN(info->pipe_state)) {
+ st21nfca_gates[j].pipe = pipe_info[2];
+ hdev->gate2pipe[st21nfca_gates[j].gate] =
+ st21nfca_gates[j].pipe;
+ }
+ }
+
+ /*
+ * 3 gates have a well known pipe ID.
+ * They will never appear in the pipe list
+ */
+ if (skb_pipe_list->len + 3 < ARRAY_SIZE(st21nfca_gates)) {
+ for (i = skb_pipe_list->len + 3;
+ i < ARRAY_SIZE(st21nfca_gates); i++) {
+ r = nfc_hci_connect_gate(hdev,
+ NFC_HCI_HOST_CONTROLLER_ID,
+ st21nfca_gates[i].gate,
+ st21nfca_gates[i].pipe);
+ if (r < 0)
+ goto free_info;
+ }
+ }
+
+ memcpy(hdev->init_data.gates, st21nfca_gates, sizeof(st21nfca_gates));
+free_info:
+ kfree_skb(skb_pipe_info);
+free_list:
+ kfree_skb(skb_pipe_list);
+ return r;
+}
+
+static int st21nfca_hci_open(struct nfc_hci_dev *hdev)
+{
+ struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+ int r;
+
+ mutex_lock(&info->info_lock);
+
+ if (info->state != ST21NFCA_ST_COLD) {
+ r = -EBUSY;
+ goto out;
+ }
+
+ r = info->phy_ops->enable(info->phy_id);
+
+ if (r == 0)
+ info->state = ST21NFCA_ST_READY;
+
+out:
+ mutex_unlock(&info->info_lock);
+ return r;
+}
+
+static void st21nfca_hci_close(struct nfc_hci_dev *hdev)
+{
+ struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+ mutex_lock(&info->info_lock);
+
+ if (info->state == ST21NFCA_ST_COLD)
+ goto out;
+
+ info->phy_ops->disable(info->phy_id);
+ info->state = ST21NFCA_ST_COLD;
+
+out:
+ mutex_unlock(&info->info_lock);
+}
+
+static int st21nfca_hci_ready(struct nfc_hci_dev *hdev)
+{
+ struct sk_buff *skb;
+
+ u8 param;
+ int r;
+
+ param = NFC_HCI_UICC_HOST_ID;
+ r = nfc_hci_set_param(hdev, NFC_HCI_ADMIN_GATE,
+ NFC_HCI_ADMIN_WHITELIST, &param, 1);
+ if (r < 0)
+ return r;
+
+ /* Set NFC_MODE in device management gate to enable */
+ r = nfc_hci_get_param(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+ ST21NFCA_NFC_MODE, &skb);
+ if (r < 0)
+ return r;
+
+ if (skb->data[0] == 0) {
+ kfree_skb(skb);
+ param = 1;
+
+ r = nfc_hci_set_param(hdev, ST21NFCA_DEVICE_MGNT_GATE,
+ ST21NFCA_NFC_MODE, &param, 1);
+ if (r < 0)
+ return r;
+ }
+
+ r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+ NFC_HCI_EVT_END_OPERATION, NULL, 0);
+ if (r < 0)
+ return r;
+
+ r = nfc_hci_get_param(hdev, NFC_HCI_ID_MGMT_GATE,
+ NFC_HCI_ID_MGMT_VERSION_SW, &skb);
+ if (r < 0)
+ return r;
+
+ if (skb->len != FULL_VERSION_LEN) {
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ print_hex_dump(KERN_DEBUG, "FULL VERSION SOFTWARE INFO: ",
+ DUMP_PREFIX_NONE, 16, 1,
+ skb->data, FULL_VERSION_LEN, false);
+
+ kfree_skb(skb);
+
+ return 0;
+}
+
+static int st21nfca_hci_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+ struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+ return info->phy_ops->write(info->phy_id, skb);
+}
+
+static int st21nfca_hci_start_poll(struct nfc_hci_dev *hdev,
+ u32 im_protocols, u32 tm_protocols)
+{
+ int r;
+
+ pr_info(DRIVER_DESC ": %s protocols 0x%x 0x%x\n",
+ __func__, im_protocols, tm_protocols);
+
+ r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+ NFC_HCI_EVT_END_OPERATION, NULL, 0);
+ if (r < 0)
+ return r;
+ if (im_protocols) {
+ /*
+ * enable polling according to im_protocols & tm_protocols
+ * - CLOSE pipe according to im_protocols & tm_protocols
+ */
+ if ((NFC_HCI_RF_READER_B_GATE & im_protocols) == 0) {
+ r = nfc_hci_disconnect_gate(hdev,
+ NFC_HCI_RF_READER_B_GATE);
+ if (r < 0)
+ return r;
+ }
+
+ if ((NFC_HCI_RF_READER_A_GATE & im_protocols) == 0) {
+ r = nfc_hci_disconnect_gate(hdev,
+ NFC_HCI_RF_READER_A_GATE);
+ if (r < 0)
+ return r;
+ }
+
+ if ((ST21NFCA_RF_READER_F_GATE & im_protocols) == 0) {
+ r = nfc_hci_disconnect_gate(hdev,
+ ST21NFCA_RF_READER_F_GATE);
+ if (r < 0)
+ return r;
+ }
+
+ if ((ST21NFCA_RF_READER_14443_3_A_GATE & im_protocols) == 0) {
+ r = nfc_hci_disconnect_gate(hdev,
+ ST21NFCA_RF_READER_14443_3_A_GATE);
+ if (r < 0)
+ return r;
+ }
+
+ if ((ST21NFCA_RF_READER_ISO15693_GATE & im_protocols) == 0) {
+ r = nfc_hci_disconnect_gate(hdev,
+ ST21NFCA_RF_READER_ISO15693_GATE);
+ if (r < 0)
+ return r;
+ }
+
+ r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+ NFC_HCI_EVT_READER_REQUESTED, NULL, 0);
+ if (r < 0)
+ nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE,
+ NFC_HCI_EVT_END_OPERATION, NULL, 0);
+ }
+ return r;
+}
+
+static int st21nfca_get_iso14443_3_atqa(struct nfc_hci_dev *hdev, u16 *atqa)
+{
+ int r;
+ struct sk_buff *atqa_skb = NULL;
+
+ r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_14443_3_A_GATE,
+ ST21NFCA_RF_READER_14443_3_A_ATQA, &atqa_skb);
+ if (r < 0)
+ goto exit;
+
+ if (atqa_skb->len != 2) {
+ r = -EPROTO;
+ goto exit;
+ }
+
+ *atqa = be16_to_cpu(*(__be16 *) atqa_skb->data);
+
+exit:
+ kfree_skb(atqa_skb);
+ return r;
+}
+
+static int st21nfca_get_iso14443_3_sak(struct nfc_hci_dev *hdev, u8 *sak)
+{
+ int r;
+ struct sk_buff *sak_skb = NULL;
+
+ r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_14443_3_A_GATE,
+ ST21NFCA_RF_READER_14443_3_A_SAK, &sak_skb);
+ if (r < 0)
+ goto exit;
+
+ if (sak_skb->len != 1) {
+ r = -EPROTO;
+ goto exit;
+ }
+
+ *sak = sak_skb->data[0];
+
+exit:
+ kfree_skb(sak_skb);
+ return r;
+}
+
+static int st21nfca_get_iso14443_3_uid(struct nfc_hci_dev *hdev, u8 *gate,
+ int *len)
+{
+ int r;
+ struct sk_buff *uid_skb = NULL;
+
+ r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_14443_3_A_GATE,
+ ST21NFCA_RF_READER_14443_3_A_UID, &uid_skb);
+ if (r < 0)
+ goto exit;
+
+ if (uid_skb->len == 0 || uid_skb->len > NFC_NFCID1_MAXSIZE) {
+ r = -EPROTO;
+ goto exit;
+ }
+
+ gate = uid_skb->data;
+ *len = uid_skb->len;
+exit:
+ kfree_skb(uid_skb);
+ return r;
+}
+
+static int st21nfca_get_iso15693_inventory(struct nfc_hci_dev *hdev,
+ struct nfc_target *target)
+{
+ int r;
+ struct sk_buff *inventory_skb = NULL;
+
+ r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_ISO15693_GATE,
+ ST21NFCA_RF_READER_ISO15693_INVENTORY,
+ &inventory_skb);
+ if (r < 0)
+ goto exit;
+
+ skb_pull(inventory_skb, 2);
+
+ if (inventory_skb->len == 0 ||
+ inventory_skb->len > NFC_ISO15693_UID_MAXSIZE) {
+ r = -EPROTO;
+ goto exit;
+ }
+
+ memcpy(target->iso15693_uid, inventory_skb->data, inventory_skb->len);
+ target->iso15693_dsfid = inventory_skb->data[1];
+ target->is_iso15693 = 1;
+exit:
+ kfree_skb(inventory_skb);
+ return r;
+}
+
+static int st21nfca_hci_target_from_gate(struct nfc_hci_dev *hdev, u8 gate,
+ struct nfc_target *target)
+{
+ int r, len;
+ u16 atqa;
+ u8 sak;
+ u8 uid[NFC_NFCID1_MAXSIZE];
+
+ switch (gate) {
+ case ST21NFCA_RF_READER_F_GATE:
+ target->supported_protocols = NFC_PROTO_FELICA_MASK;
+ break;
+ case ST21NFCA_RF_READER_14443_3_A_GATE:
+ /* ISO14443-3 type 1 or 2 tags */
+ r = st21nfca_get_iso14443_3_atqa(hdev, &atqa);
+ if (r < 0)
+ return r;
+ if (atqa == 0x000c) {
+ target->supported_protocols = NFC_PROTO_JEWEL_MASK;
+ target->sens_res = 0x0c00;
+ } else {
+ r = st21nfca_get_iso14443_3_sak(hdev, &sak);
+ if (r < 0)
+ return r;
+
+ r = st21nfca_get_iso14443_3_uid(hdev, uid, &len);
+ if (r < 0)
+ return r;
+
+ target->supported_protocols =
+ nfc_hci_sak_to_protocol(sak);
+ if (target->supported_protocols == 0xffffffff)
+ return -EPROTO;
+
+ target->sens_res = atqa;
+ target->sel_res = sak;
+ memcpy(target->nfcid1, uid, len);
+ target->nfcid1_len = len;
+ }
+
+ break;
+ case ST21NFCA_RF_READER_ISO15693_GATE:
+ target->supported_protocols = NFC_PROTO_ISO15693_MASK;
+ r = st21nfca_get_iso15693_inventory(hdev, target);
+ if (r < 0)
+ return r;
+ break;
+ default:
+ return -EPROTO;
+ }
+
+ return 0;
+}
+
+#define ST21NFCA_CB_TYPE_READER_ISO15693 1
+static void st21nfca_hci_data_exchange_cb(void *context, struct sk_buff *skb,
+ int err)
+{
+ struct st21nfca_hci_info *info = context;
+
+ switch (info->async_cb_type) {
+ case ST21NFCA_CB_TYPE_READER_ISO15693:
+ if (err == 0)
+ skb_trim(skb, skb->len - 1);
+ info->async_cb(info->async_cb_context, skb, err);
+ break;
+ default:
+ if (err == 0)
+ kfree_skb(skb);
+ break;
+ }
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the data exchange
+ * 1: driver doesn't especially handle, please do standard processing
+ */
+static int st21nfca_hci_im_transceive(struct nfc_hci_dev *hdev,
+ struct nfc_target *target,
+ struct sk_buff *skb,
+ data_exchange_cb_t cb, void *cb_context)
+{
+ struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+ pr_info(DRIVER_DESC ": %s for gate=%d len=%d\n", __func__,
+ target->hci_reader_gate, skb->len);
+
+ switch (target->hci_reader_gate) {
+ case ST21NFCA_RF_READER_F_GATE:
+ *skb_push(skb, 1) = 0x1a;
+ return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+ ST21NFCA_WR_XCHG_DATA, skb->data,
+ skb->len, cb, cb_context);
+ case ST21NFCA_RF_READER_14443_3_A_GATE:
+ *skb_push(skb, 1) = 0x1a; /* CTR, see spec:10.2.2.1 */
+
+ return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+ ST21NFCA_WR_XCHG_DATA, skb->data,
+ skb->len, cb, cb_context);
+ case ST21NFCA_RF_READER_ISO15693_GATE:
+ info->async_cb_type = ST21NFCA_CB_TYPE_READER_ISO15693;
+ info->async_cb = cb;
+ info->async_cb_context = cb_context;
+
+ *skb_push(skb, 1) = 0x17;
+
+ return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+ ST21NFCA_WR_XCHG_DATA, skb->data,
+ skb->len,
+ st21nfca_hci_data_exchange_cb,
+ info);
+ break;
+ default:
+ return 1;
+ }
+}
+
+static int st21nfca_hci_check_presence(struct nfc_hci_dev *hdev,
+ struct nfc_target *target)
+{
+ u8 fwi = 0x11;
+ switch (target->hci_reader_gate) {
+ case NFC_HCI_RF_READER_A_GATE:
+ case NFC_HCI_RF_READER_B_GATE:
+ /*
+ * PRESENCE_CHECK on those gates is available
+ * However, the answer to this command is taking 3 * fwi
+ * if the card is no present.
+ * Instead, we send an empty I-Frame with a very short
+ * configurable fwi ~604µs.
+ */
+ return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
+ ST21NFCA_WR_XCHG_DATA, &fwi, 1, NULL);
+ case ST21NFCA_RF_READER_14443_3_A_GATE:
+ return nfc_hci_send_cmd(hdev, target->hci_reader_gate,
+ ST21NFCA_RF_READER_CMD_PRESENCE_CHECK,
+ NULL, 0, NULL);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static struct nfc_hci_ops st21nfca_hci_ops = {
+ .open = st21nfca_hci_open,
+ .close = st21nfca_hci_close,
+ .load_session = st21nfca_hci_load_session,
+ .hci_ready = st21nfca_hci_ready,
+ .xmit = st21nfca_hci_xmit,
+ .start_poll = st21nfca_hci_start_poll,
+ .target_from_gate = st21nfca_hci_target_from_gate,
+ .im_transceive = st21nfca_hci_im_transceive,
+ .check_presence = st21nfca_hci_check_presence,
+};
+
+int st21nfca_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops,
+ char *llc_name, int phy_headroom, int phy_tailroom,
+ int phy_payload, struct nfc_hci_dev **hdev)
+{
+ struct st21nfca_hci_info *info;
+ int r = 0;
+ int dev_num;
+ u32 protocols;
+ struct nfc_hci_init_data init_data;
+ unsigned long quirks = 0;
+
+ info = kzalloc(sizeof(struct st21nfca_hci_info), GFP_KERNEL);
+ if (!info) {
+ r = -ENOMEM;
+ goto err_alloc_hdev;
+ }
+
+ info->phy_ops = phy_ops;
+ info->phy_id = phy_id;
+ info->state = ST21NFCA_ST_COLD;
+ mutex_init(&info->info_lock);
+
+ init_data.gate_count = ARRAY_SIZE(st21nfca_gates);
+
+ memcpy(init_data.gates, st21nfca_gates, sizeof(st21nfca_gates));
+
+ /*
+ * Session id must include the driver name + i2c bus addr
+ * persistent info to discriminate 2 identical chips
+ */
+ dev_num = find_first_zero_bit(dev_mask, ST21NFCA_NUM_DEVICES);
+ if (dev_num >= ST21NFCA_NUM_DEVICES)
+ goto err_alloc_hdev;
+
+ scnprintf(init_data.session_id, sizeof(init_data.session_id), "%s%2x",
+ "ST21AH", dev_num);
+
+ protocols = NFC_PROTO_JEWEL_MASK |
+ NFC_PROTO_MIFARE_MASK |
+ NFC_PROTO_FELICA_MASK |
+ NFC_PROTO_ISO14443_MASK |
+ NFC_PROTO_ISO14443_B_MASK |
+ NFC_PROTO_ISO15693_MASK;
+
+ set_bit(NFC_HCI_QUIRK_SHORT_CLEAR, &quirks);
+
+ info->hdev =
+ nfc_hci_allocate_device(&st21nfca_hci_ops, &init_data, quirks,
+ protocols, llc_name,
+ phy_headroom + ST21NFCA_CMDS_HEADROOM,
+ phy_tailroom, phy_payload);
+
+ if (!info->hdev) {
+ pr_err("Cannot allocate nfc hdev.\n");
+ r = -ENOMEM;
+ goto err_alloc_hdev;
+ }
+
+ nfc_hci_set_clientdata(info->hdev, info);
+
+ r = nfc_hci_register_device(info->hdev);
+ if (r)
+ goto err_regdev;
+
+ *hdev = info->hdev;
+
+ return 0;
+
+err_regdev:
+ nfc_hci_free_device(info->hdev);
+
+err_alloc_hdev:
+ kfree(info);
+
+ return r;
+}
+EXPORT_SYMBOL(st21nfca_hci_probe);
+
+void st21nfca_hci_remove(struct nfc_hci_dev *hdev)
+{
+ struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
+
+ nfc_hci_unregister_device(hdev);
+ nfc_hci_free_device(hdev);
+ kfree(info);
+}
+EXPORT_SYMBOL(st21nfca_hci_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/st21nfca/st21nfca.h b/drivers/nfc/st21nfca/st21nfca.h
new file mode 100644
index 000000000000..334cd90bcc8c
--- /dev/null
+++ b/drivers/nfc/st21nfca/st21nfca.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LOCAL_ST21NFCA_H_
+#define __LOCAL_ST21NFCA_H_
+
+#include <net/nfc/hci.h>
+
+#define HCI_MODE 0
+
+/* framing in HCI mode */
+#define ST21NFCA_SOF_EOF_LEN 2
+
+/* Almost every time value is 0 */
+#define ST21NFCA_HCI_LLC_LEN 1
+
+/* Size in worst case :
+ * In normal case CRC len = 2 but byte stuffing
+ * may appear in case one CRC byte = ST21NFCA_SOF_EOF
+ */
+#define ST21NFCA_HCI_LLC_CRC 4
+
+#define ST21NFCA_HCI_LLC_LEN_CRC (ST21NFCA_SOF_EOF_LEN + \
+ ST21NFCA_HCI_LLC_LEN + \
+ ST21NFCA_HCI_LLC_CRC)
+#define ST21NFCA_HCI_LLC_MIN_SIZE (1 + ST21NFCA_HCI_LLC_LEN_CRC)
+
+/* Worst case when adding byte stuffing between each byte */
+#define ST21NFCA_HCI_LLC_MAX_PAYLOAD 29
+#define ST21NFCA_HCI_LLC_MAX_SIZE (ST21NFCA_HCI_LLC_LEN_CRC + 1 + \
+ ST21NFCA_HCI_LLC_MAX_PAYLOAD)
+
+#define DRIVER_DESC "HCI NFC driver for ST21NFCA"
+
+#define ST21NFCA_HCI_MODE 0
+
+#define ST21NFCA_NUM_DEVICES 256
+
+int st21nfca_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops,
+ char *llc_name, int phy_headroom, int phy_tailroom,
+ int phy_payload, struct nfc_hci_dev **hdev);
+void st21nfca_hci_remove(struct nfc_hci_dev *hdev);
+
+enum st21nfca_state {
+ ST21NFCA_ST_COLD,
+ ST21NFCA_ST_READY,
+};
+
+struct st21nfca_hci_info {
+ struct nfc_phy_ops *phy_ops;
+ void *phy_id;
+
+ struct nfc_hci_dev *hdev;
+
+ enum st21nfca_state state;
+
+ struct mutex info_lock;
+
+ int async_cb_type;
+ data_exchange_cb_t async_cb;
+ void *async_cb_context;
+
+} __packed;
+
+/* Reader RF commands */
+#define ST21NFCA_WR_XCHG_DATA 0x10
+
+#define ST21NFCA_RF_READER_F_GATE 0x14
+#define ST21NFCA_RF_READER_F_DATARATE 0x01
+#define ST21NFCA_RF_READER_F_DATARATE_106 0x01
+#define ST21NFCA_RF_READER_F_DATARATE_212 0x02
+#define ST21NFCA_RF_READER_F_DATARATE_424 0x04
+
+#endif /* __LOCAL_ST21NFCA_H_ */
diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
index d9babe986473..3b78b031e617 100644
--- a/drivers/nfc/trf7970a.c
+++ b/drivers/nfc/trf7970a.c
@@ -16,6 +16,7 @@
#include <linux/device.h>
#include <linux/netdevice.h>
#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
#include <linux/nfc.h>
#include <linux/skbuff.h>
#include <linux/delay.h>
@@ -67,14 +68,14 @@
* only the SRX bit set, it means that all of the data has been received
* (once what's in the fifo has been read). However, depending on timing
* an interrupt status with only the SRX bit set may not be recived. In
- * those cases, the timeout mechanism is used to wait 5 ms in case more
- * data arrives. After 5 ms, it is assumed that all of the data has been
+ * those cases, the timeout mechanism is used to wait 20 ms in case more
+ * data arrives. After 20 ms, it is assumed that all of the data has been
* received and the accumulated rx data is sent upstream. The
* 'TRF7970A_ST_WAIT_FOR_RX_DATA_CONT' state is used for this purpose
* (i.e., it indicates that some data has been received but we're not sure
* if there is more coming so a timeout in this state means all data has
- * been received and there isn't an error). The delay is 5 ms since delays
- * over 2 ms have been observed during testing (a little extra just in case).
+ * been received and there isn't an error). The delay is 20 ms since delays
+ * of ~16 ms have been observed during testing.
*
* Type 2 write and sector select commands respond with a 4-bit ACK or NACK.
* Having only 4 bits in the FIFO won't normally generate an interrupt so
@@ -104,8 +105,11 @@
#define TRF7970A_SUPPORTED_PROTOCOLS \
(NFC_PROTO_MIFARE_MASK | NFC_PROTO_ISO14443_MASK | \
+ NFC_PROTO_ISO14443_B_MASK | NFC_PROTO_FELICA_MASK | \
NFC_PROTO_ISO15693_MASK)
+#define TRF7970A_AUTOSUSPEND_DELAY 30000 /* 30 seconds */
+
/* TX data must be prefixed with a FIFO reset cmd, a cmd that depends
* on what the current framing is, the address of the TX length byte 1
* register (0x1d), and the 2 byte length of the data to be transmitted.
@@ -120,7 +124,7 @@
/* TX length is 3 nibbles long ==> 4KB - 1 bytes max */
#define TRF7970A_TX_MAX (4096 - 1)
-#define TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT 5
+#define TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT 20
#define TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT 3
#define TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF 20
@@ -330,13 +334,15 @@ struct trf7970a {
struct regulator *regulator;
struct nfc_digital_dev *ddev;
u32 quirks;
- bool powering_up;
bool aborting;
struct sk_buff *tx_skb;
struct sk_buff *rx_skb;
nfc_digital_cmd_complete_t cb;
void *cb_arg;
+ u8 chip_status_ctrl;
u8 iso_ctrl;
+ u8 iso_ctrl_tech;
+ u8 modulator_sys_clk_ctrl;
u8 special_fcn_reg1;
int technology;
int framing;
@@ -681,7 +687,9 @@ static irqreturn_t trf7970a_irq(int irq, void *dev_id)
trf->ignore_timeout =
!cancel_delayed_work(&trf->timeout_work);
trf7970a_drain_fifo(trf, status);
- } else if (!(status & TRF7970A_IRQ_STATUS_TX)) {
+ } else if (status == TRF7970A_IRQ_STATUS_TX) {
+ trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+ } else {
trf7970a_send_err_upstream(trf, -EIO);
}
break;
@@ -757,8 +765,8 @@ static int trf7970a_init(struct trf7970a *trf)
if (ret)
goto err_out;
- ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL,
- TRF7970A_MODULATOR_DEPTH_OOK);
+ /* Must clear NFC Target Detection Level reg due to erratum */
+ ret = trf7970a_write(trf, TRF7970A_NFC_TARGET_LEVEL, 0);
if (ret)
goto err_out;
@@ -774,12 +782,7 @@ static int trf7970a_init(struct trf7970a *trf)
trf->special_fcn_reg1 = 0;
- ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL,
- TRF7970A_CHIP_STATUS_RF_ON |
- TRF7970A_CHIP_STATUS_VRS5_3);
- if (ret)
- goto err_out;
-
+ trf->iso_ctrl = 0xff;
return 0;
err_out:
@@ -791,53 +794,29 @@ static void trf7970a_switch_rf_off(struct trf7970a *trf)
{
dev_dbg(trf->dev, "Switching rf off\n");
- gpio_set_value(trf->en_gpio, 0);
- gpio_set_value(trf->en2_gpio, 0);
+ trf->chip_status_ctrl &= ~TRF7970A_CHIP_STATUS_RF_ON;
+
+ trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL, trf->chip_status_ctrl);
trf->aborting = false;
trf->state = TRF7970A_ST_OFF;
+
+ pm_runtime_mark_last_busy(trf->dev);
+ pm_runtime_put_autosuspend(trf->dev);
}
-static int trf7970a_switch_rf_on(struct trf7970a *trf)
+static void trf7970a_switch_rf_on(struct trf7970a *trf)
{
- unsigned long delay;
- int ret;
-
dev_dbg(trf->dev, "Switching rf on\n");
- if (trf->powering_up)
- usleep_range(5000, 6000);
-
- gpio_set_value(trf->en2_gpio, 1);
- usleep_range(1000, 2000);
- gpio_set_value(trf->en_gpio, 1);
+ pm_runtime_get_sync(trf->dev);
- /* The delay between enabling the trf7970a and issuing the first
- * command is significantly longer the very first time after powering
- * up. Make sure the longer delay is only done the first time.
- */
- if (trf->powering_up) {
- delay = 20000;
- trf->powering_up = false;
- } else {
- delay = 5000;
- }
-
- usleep_range(delay, delay + 1000);
-
- ret = trf7970a_init(trf);
- if (ret)
- trf7970a_switch_rf_off(trf);
- else
- trf->state = TRF7970A_ST_IDLE;
-
- return ret;
+ trf->state = TRF7970A_ST_IDLE;
}
static int trf7970a_switch_rf(struct nfc_digital_dev *ddev, bool on)
{
struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
- int ret = 0;
dev_dbg(trf->dev, "Switching RF - state: %d, on: %d\n", trf->state, on);
@@ -846,7 +825,7 @@ static int trf7970a_switch_rf(struct nfc_digital_dev *ddev, bool on)
if (on) {
switch (trf->state) {
case TRF7970A_ST_OFF:
- ret = trf7970a_switch_rf_on(trf);
+ trf7970a_switch_rf_on(trf);
break;
case TRF7970A_ST_IDLE:
case TRF7970A_ST_IDLE_RX_BLOCKED:
@@ -871,7 +850,7 @@ static int trf7970a_switch_rf(struct nfc_digital_dev *ddev, bool on)
}
mutex_unlock(&trf->lock);
- return ret;
+ return 0;
}
static int trf7970a_config_rf_tech(struct trf7970a *trf, int tech)
@@ -882,10 +861,24 @@ static int trf7970a_config_rf_tech(struct trf7970a *trf, int tech)
switch (tech) {
case NFC_DIGITAL_RF_TECH_106A:
- trf->iso_ctrl = TRF7970A_ISO_CTRL_14443A_106;
+ trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_14443A_106;
+ trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_OOK;
+ break;
+ case NFC_DIGITAL_RF_TECH_106B:
+ trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_14443B_106;
+ trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_ASK10;
+ break;
+ case NFC_DIGITAL_RF_TECH_212F:
+ trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_FELICA_212;
+ trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_ASK10;
+ break;
+ case NFC_DIGITAL_RF_TECH_424F:
+ trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_FELICA_424;
+ trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_ASK10;
break;
case NFC_DIGITAL_RF_TECH_ISO15693:
- trf->iso_ctrl = TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648;
+ trf->iso_ctrl_tech = TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648;
+ trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_DEPTH_OOK;
break;
default:
dev_dbg(trf->dev, "Unsupported rf technology: %d\n", tech);
@@ -899,24 +892,31 @@ static int trf7970a_config_rf_tech(struct trf7970a *trf, int tech)
static int trf7970a_config_framing(struct trf7970a *trf, int framing)
{
+ u8 iso_ctrl = trf->iso_ctrl_tech;
+ int ret;
+
dev_dbg(trf->dev, "framing: %d\n", framing);
switch (framing) {
case NFC_DIGITAL_FRAMING_NFCA_SHORT:
case NFC_DIGITAL_FRAMING_NFCA_STANDARD:
trf->tx_cmd = TRF7970A_CMD_TRANSMIT_NO_CRC;
- trf->iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
+ iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
break;
case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A:
case NFC_DIGITAL_FRAMING_NFCA_T4T:
+ case NFC_DIGITAL_FRAMING_NFCB:
+ case NFC_DIGITAL_FRAMING_NFCB_T4T:
+ case NFC_DIGITAL_FRAMING_NFCF:
+ case NFC_DIGITAL_FRAMING_NFCF_T3T:
case NFC_DIGITAL_FRAMING_ISO15693_INVENTORY:
case NFC_DIGITAL_FRAMING_ISO15693_T5T:
trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
- trf->iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N;
+ iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N;
break;
case NFC_DIGITAL_FRAMING_NFCA_T2T:
trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
- trf->iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
+ iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
break;
default:
dev_dbg(trf->dev, "Unsupported Framing: %d\n", framing);
@@ -925,24 +925,46 @@ static int trf7970a_config_framing(struct trf7970a *trf, int framing)
trf->framing = framing;
- return trf7970a_write(trf, TRF7970A_ISO_CTRL, trf->iso_ctrl);
+ if (iso_ctrl != trf->iso_ctrl) {
+ ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, iso_ctrl);
+ if (ret)
+ return ret;
+
+ trf->iso_ctrl = iso_ctrl;
+
+ ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL,
+ trf->modulator_sys_clk_ctrl);
+ if (ret)
+ return ret;
+ }
+
+ if (!(trf->chip_status_ctrl & TRF7970A_CHIP_STATUS_RF_ON)) {
+ ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL,
+ trf->chip_status_ctrl |
+ TRF7970A_CHIP_STATUS_RF_ON);
+ if (ret)
+ return ret;
+
+ trf->chip_status_ctrl |= TRF7970A_CHIP_STATUS_RF_ON;
+
+ usleep_range(5000, 6000);
+ }
+
+ return 0;
}
static int trf7970a_in_configure_hw(struct nfc_digital_dev *ddev, int type,
int param)
{
struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
- int ret = 0;
+ int ret;
dev_dbg(trf->dev, "Configure hw - type: %d, param: %d\n", type, param);
mutex_lock(&trf->lock);
- if (trf->state == TRF7970A_ST_OFF) {
- ret = trf7970a_switch_rf_on(trf);
- if (ret)
- goto err_out;
- }
+ if (trf->state == TRF7970A_ST_OFF)
+ trf7970a_switch_rf_on(trf);
switch (type) {
case NFC_DIGITAL_CONFIG_RF_TECH:
@@ -956,7 +978,6 @@ static int trf7970a_in_configure_hw(struct nfc_digital_dev *ddev, int type,
ret = -EINVAL;
}
-err_out:
mutex_unlock(&trf->lock);
return ret;
}
@@ -1191,7 +1212,18 @@ static void trf7970a_abort_cmd(struct nfc_digital_dev *ddev)
dev_dbg(trf->dev, "Abort process initiated\n");
mutex_lock(&trf->lock);
- trf->aborting = true;
+
+ switch (trf->state) {
+ case TRF7970A_ST_WAIT_FOR_TX_FIFO:
+ case TRF7970A_ST_WAIT_FOR_RX_DATA:
+ case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT:
+ case TRF7970A_ST_WAIT_TO_ISSUE_EOF:
+ trf->aborting = true;
+ break;
+ default:
+ break;
+ }
+
mutex_unlock(&trf->lock);
}
@@ -1206,12 +1238,25 @@ static struct nfc_digital_ops trf7970a_nfc_ops = {
.abort_cmd = trf7970a_abort_cmd,
};
+static int trf7970a_get_autosuspend_delay(struct device_node *np)
+{
+ int autosuspend_delay, ret;
+
+ ret = of_property_read_u32(np, "autosuspend-delay", &autosuspend_delay);
+ if (ret)
+ autosuspend_delay = TRF7970A_AUTOSUSPEND_DELAY;
+
+ of_node_put(np);
+
+ return autosuspend_delay;
+}
+
static int trf7970a_probe(struct spi_device *spi)
{
struct device_node *np = spi->dev.of_node;
const struct spi_device_id *id = spi_get_device_id(spi);
struct trf7970a *trf;
- int ret;
+ int uvolts, autosuspend_delay, ret;
if (!np) {
dev_err(&spi->dev, "No Device Tree entry\n");
@@ -1281,7 +1326,10 @@ static int trf7970a_probe(struct spi_device *spi)
goto err_destroy_lock;
}
- trf->powering_up = true;
+ uvolts = regulator_get_voltage(trf->regulator);
+
+ if (uvolts > 4000000)
+ trf->chip_status_ctrl = TRF7970A_CHIP_STATUS_VRS5_3;
trf->ddev = nfc_digital_allocate_device(&trf7970a_nfc_ops,
TRF7970A_SUPPORTED_PROTOCOLS,
@@ -1297,6 +1345,12 @@ static int trf7970a_probe(struct spi_device *spi)
nfc_digital_set_drvdata(trf->ddev, trf);
spi_set_drvdata(spi, trf);
+ autosuspend_delay = trf7970a_get_autosuspend_delay(np);
+
+ pm_runtime_set_autosuspend_delay(trf->dev, autosuspend_delay);
+ pm_runtime_use_autosuspend(trf->dev);
+ pm_runtime_enable(trf->dev);
+
ret = nfc_digital_register_device(trf->ddev);
if (ret) {
dev_err(trf->dev, "Can't register NFC digital device: %d\n",
@@ -1307,6 +1361,7 @@ static int trf7970a_probe(struct spi_device *spi)
return 0;
err_free_ddev:
+ pm_runtime_disable(trf->dev);
nfc_digital_free_device(trf->ddev);
err_disable_regulator:
regulator_disable(trf->regulator);
@@ -1321,15 +1376,16 @@ static int trf7970a_remove(struct spi_device *spi)
mutex_lock(&trf->lock);
- trf7970a_switch_rf_off(trf);
- trf7970a_init(trf);
-
switch (trf->state) {
case TRF7970A_ST_WAIT_FOR_TX_FIFO:
case TRF7970A_ST_WAIT_FOR_RX_DATA:
case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT:
case TRF7970A_ST_WAIT_TO_ISSUE_EOF:
trf7970a_send_err_upstream(trf, -ECANCELED);
+ /* FALLTHROUGH */
+ case TRF7970A_ST_IDLE:
+ case TRF7970A_ST_IDLE_RX_BLOCKED:
+ pm_runtime_put_sync(trf->dev);
break;
default:
break;
@@ -1337,6 +1393,8 @@ static int trf7970a_remove(struct spi_device *spi)
mutex_unlock(&trf->lock);
+ pm_runtime_disable(trf->dev);
+
nfc_digital_unregister_device(trf->ddev);
nfc_digital_free_device(trf->ddev);
@@ -1347,6 +1405,70 @@ static int trf7970a_remove(struct spi_device *spi)
return 0;
}
+#ifdef CONFIG_PM_RUNTIME
+static int trf7970a_pm_runtime_suspend(struct device *dev)
+{
+ struct spi_device *spi = container_of(dev, struct spi_device, dev);
+ struct trf7970a *trf = spi_get_drvdata(spi);
+ int ret;
+
+ dev_dbg(dev, "Runtime suspend\n");
+
+ if (trf->state != TRF7970A_ST_OFF) {
+ dev_dbg(dev, "Can't suspend - not in OFF state (%d)\n",
+ trf->state);
+ return -EBUSY;
+ }
+
+ gpio_set_value(trf->en_gpio, 0);
+ gpio_set_value(trf->en2_gpio, 0);
+
+ ret = regulator_disable(trf->regulator);
+ if (ret)
+ dev_err(dev, "%s - Can't disable VIN: %d\n", __func__, ret);
+
+ return ret;
+}
+
+static int trf7970a_pm_runtime_resume(struct device *dev)
+{
+ struct spi_device *spi = container_of(dev, struct spi_device, dev);
+ struct trf7970a *trf = spi_get_drvdata(spi);
+ int ret;
+
+ dev_dbg(dev, "Runtime resume\n");
+
+ ret = regulator_enable(trf->regulator);
+ if (ret) {
+ dev_err(dev, "%s - Can't enable VIN: %d\n", __func__, ret);
+ return ret;
+ }
+
+ usleep_range(5000, 6000);
+
+ gpio_set_value(trf->en2_gpio, 1);
+ usleep_range(1000, 2000);
+ gpio_set_value(trf->en_gpio, 1);
+
+ usleep_range(20000, 21000);
+
+ ret = trf7970a_init(trf);
+ if (ret) {
+ dev_err(dev, "%s - Can't initialize: %d\n", __func__, ret);
+ return ret;
+ }
+
+ pm_runtime_mark_last_busy(dev);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops trf7970a_pm_ops = {
+ SET_RUNTIME_PM_OPS(trf7970a_pm_runtime_suspend,
+ trf7970a_pm_runtime_resume, NULL)
+};
+
static const struct spi_device_id trf7970a_id_table[] = {
{ "trf7970a", TRF7970A_QUIRK_IRQ_STATUS_READ_ERRATA },
{ }
@@ -1360,6 +1482,7 @@ static struct spi_driver trf7970a_spi_driver = {
.driver = {
.name = "trf7970a",
.owner = THIS_MODULE,
+ .pm = &trf7970a_pm_ops,
},
};
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-23 16:13:09 +0300