diff options
Diffstat (limited to 'drivers/staging/wimax/i2400m/driver.c')
| -rw-r--r-- | drivers/staging/wimax/i2400m/driver.c | 1003 |
1 files changed, 0 insertions, 1003 deletions
diff --git a/drivers/staging/wimax/i2400m/driver.c b/drivers/staging/wimax/i2400m/driver.c deleted file mode 100644 index f5186458bb3d..000000000000 --- a/drivers/staging/wimax/i2400m/driver.c +++ /dev/null @@ -1,1003 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel Wireless WiMAX Connection 2400m - * Generic probe/disconnect, reset and message passing - * - * Copyright (C) 2007-2008 Intel Corporation <linux-wimax@intel.com> - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * See i2400m.h for driver documentation. This contains helpers for - * the driver model glue [_setup()/_release()], handling device resets - * [_dev_reset_handle()], and the backends for the WiMAX stack ops - * reset [_op_reset()] and message from user [_op_msg_from_user()]. - * - * ROADMAP: - * - * i2400m_op_msg_from_user() - * i2400m_msg_to_dev() - * wimax_msg_to_user_send() - * - * i2400m_op_reset() - * i240m->bus_reset() - * - * i2400m_dev_reset_handle() - * __i2400m_dev_reset_handle() - * __i2400m_dev_stop() - * __i2400m_dev_start() - * - * i2400m_setup() - * i2400m->bus_setup() - * i2400m_bootrom_init() - * register_netdev() - * wimax_dev_add() - * i2400m_dev_start() - * __i2400m_dev_start() - * i2400m_dev_bootstrap() - * i2400m_tx_setup() - * i2400m->bus_dev_start() - * i2400m_firmware_check() - * i2400m_check_mac_addr() - * - * i2400m_release() - * i2400m_dev_stop() - * __i2400m_dev_stop() - * i2400m_dev_shutdown() - * i2400m->bus_dev_stop() - * i2400m_tx_release() - * i2400m->bus_release() - * wimax_dev_rm() - * unregister_netdev() - */ -#include "i2400m.h" -#include <linux/etherdevice.h> -#include "linux-wimax-i2400m.h" -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/suspend.h> -#include <linux/slab.h> - -#define D_SUBMODULE driver -#include "debug-levels.h" - - -static char i2400m_debug_params[128]; -module_param_string(debug, i2400m_debug_params, sizeof(i2400m_debug_params), - 0644); -MODULE_PARM_DESC(debug, - "String of space-separated NAME:VALUE pairs, where NAMEs " - "are the different debug submodules and VALUE are the " - "initial debug value to set."); - -static char i2400m_barkers_params[128]; -module_param_string(barkers, i2400m_barkers_params, - sizeof(i2400m_barkers_params), 0644); -MODULE_PARM_DESC(barkers, - "String of comma-separated 32-bit values; each is " - "recognized as the value the device sends as a reboot " - "signal; values are appended to a list--setting one value " - "as zero cleans the existing list and starts a new one."); - -/* - * WiMAX stack operation: relay a message from user space - * - * @wimax_dev: device descriptor - * @pipe_name: named pipe the message is for - * @msg_buf: pointer to the message bytes - * @msg_len: length of the buffer - * @genl_info: passed by the generic netlink layer - * - * The WiMAX stack will call this function when a message was received - * from user space. - * - * For the i2400m, this is an L3L4 message, as specified in - * include/linux/wimax/i2400m.h, and thus prefixed with a 'struct - * i2400m_l3l4_hdr'. Driver (and device) expect the messages to be - * coded in Little Endian. - * - * This function just verifies that the header declaration and the - * payload are consistent and then deals with it, either forwarding it - * to the device or procesing it locally. - * - * In the i2400m, messages are basically commands that will carry an - * ack, so we use i2400m_msg_to_dev() and then deliver the ack back to - * user space. The rx.c code might intercept the response and use it - * to update the driver's state, but then it will pass it on so it can - * be relayed back to user space. - * - * Note that asynchronous events from the device are processed and - * sent to user space in rx.c. - */ -static -int i2400m_op_msg_from_user(struct wimax_dev *wimax_dev, - const char *pipe_name, - const void *msg_buf, size_t msg_len, - const struct genl_info *genl_info) -{ - int result; - struct i2400m *i2400m = wimax_dev_to_i2400m(wimax_dev); - struct device *dev = i2400m_dev(i2400m); - struct sk_buff *ack_skb; - - d_fnstart(4, dev, "(wimax_dev %p [i2400m %p] msg_buf %p " - "msg_len %zu genl_info %p)\n", wimax_dev, i2400m, - msg_buf, msg_len, genl_info); - ack_skb = i2400m_msg_to_dev(i2400m, msg_buf, msg_len); - result = PTR_ERR(ack_skb); - if (IS_ERR(ack_skb)) - goto error_msg_to_dev; - result = wimax_msg_send(&i2400m->wimax_dev, ack_skb); -error_msg_to_dev: - d_fnend(4, dev, "(wimax_dev %p [i2400m %p] msg_buf %p msg_len %zu " - "genl_info %p) = %d\n", wimax_dev, i2400m, msg_buf, msg_len, - genl_info, result); - return result; -} - - -/* - * Context to wait for a reset to finalize - */ -struct i2400m_reset_ctx { - struct completion completion; - int result; -}; - - -/* - * WiMAX stack operation: reset a device - * - * @wimax_dev: device descriptor - * - * See the documentation for wimax_reset() and wimax_dev->op_reset for - * the requirements of this function. The WiMAX stack guarantees - * serialization on calls to this function. - * - * Do a warm reset on the device; if it fails, resort to a cold reset - * and return -ENODEV. On successful warm reset, we need to block - * until it is complete. - * - * The bus-driver implementation of reset takes care of falling back - * to cold reset if warm fails. - */ -static -int i2400m_op_reset(struct wimax_dev *wimax_dev) -{ - int result; - struct i2400m *i2400m = wimax_dev_to_i2400m(wimax_dev); - struct device *dev = i2400m_dev(i2400m); - struct i2400m_reset_ctx ctx = { - .completion = COMPLETION_INITIALIZER_ONSTACK(ctx.completion), - .result = 0, - }; - - d_fnstart(4, dev, "(wimax_dev %p)\n", wimax_dev); - mutex_lock(&i2400m->init_mutex); - i2400m->reset_ctx = &ctx; - mutex_unlock(&i2400m->init_mutex); - result = i2400m_reset(i2400m, I2400M_RT_WARM); - if (result < 0) - goto out; - result = wait_for_completion_timeout(&ctx.completion, 4*HZ); - if (result == 0) - result = -ETIMEDOUT; - else if (result > 0) - result = ctx.result; - /* if result < 0, pass it on */ - mutex_lock(&i2400m->init_mutex); - i2400m->reset_ctx = NULL; - mutex_unlock(&i2400m->init_mutex); -out: - d_fnend(4, dev, "(wimax_dev %p) = %d\n", wimax_dev, result); - return result; -} - - -/* - * Check the MAC address we got from boot mode is ok - * - * @i2400m: device descriptor - * - * Returns: 0 if ok, < 0 errno code on error. - */ -static -int i2400m_check_mac_addr(struct i2400m *i2400m) -{ - int result; - struct device *dev = i2400m_dev(i2400m); - struct sk_buff *skb; - const struct i2400m_tlv_detailed_device_info *ddi; - struct net_device *net_dev = i2400m->wimax_dev.net_dev; - - d_fnstart(3, dev, "(i2400m %p)\n", i2400m); - skb = i2400m_get_device_info(i2400m); - if (IS_ERR(skb)) { - result = PTR_ERR(skb); - dev_err(dev, "Cannot verify MAC address, error reading: %d\n", - result); - goto error; - } - /* Extract MAC address */ - ddi = (void *) skb->data; - BUILD_BUG_ON(ETH_ALEN != sizeof(ddi->mac_address)); - d_printf(2, dev, "GET DEVICE INFO: mac addr %pM\n", - ddi->mac_address); - if (!memcmp(net_dev->perm_addr, ddi->mac_address, - sizeof(ddi->mac_address))) - goto ok; - dev_warn(dev, "warning: device reports a different MAC address " - "to that of boot mode's\n"); - dev_warn(dev, "device reports %pM\n", ddi->mac_address); - dev_warn(dev, "boot mode reported %pM\n", net_dev->perm_addr); - if (is_zero_ether_addr(ddi->mac_address)) - dev_err(dev, "device reports an invalid MAC address, " - "not updating\n"); - else { - dev_warn(dev, "updating MAC address\n"); - net_dev->addr_len = ETH_ALEN; - memcpy(net_dev->perm_addr, ddi->mac_address, ETH_ALEN); - memcpy(net_dev->dev_addr, ddi->mac_address, ETH_ALEN); - } -ok: - result = 0; - kfree_skb(skb); -error: - d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result); - return result; -} - - -/** - * __i2400m_dev_start - Bring up driver communication with the device - * - * @i2400m: device descriptor - * @flags: boot mode flags - * - * Returns: 0 if ok, < 0 errno code on error. - * - * Uploads firmware and brings up all the resources needed to be able - * to communicate with the device. - * - * The workqueue has to be setup early, at least before RX handling - * (it's only real user for now) so it can process reports as they - * arrive. We also want to destroy it if we retry, to make sure it is - * flushed...easier like this. - * - * TX needs to be setup before the bus-specific code (otherwise on - * shutdown, the bus-tx code could try to access it). - */ -static -int __i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri flags) -{ - int result; - struct wimax_dev *wimax_dev = &i2400m->wimax_dev; - struct net_device *net_dev = wimax_dev->net_dev; - struct device *dev = i2400m_dev(i2400m); - int times = i2400m->bus_bm_retries; - - d_fnstart(3, dev, "(i2400m %p)\n", i2400m); -retry: - result = i2400m_dev_bootstrap(i2400m, flags); - if (result < 0) { - dev_err(dev, "cannot bootstrap device: %d\n", result); - goto error_bootstrap; - } - result = i2400m_tx_setup(i2400m); - if (result < 0) - goto error_tx_setup; - result = i2400m_rx_setup(i2400m); - if (result < 0) - goto error_rx_setup; - i2400m->work_queue = create_singlethread_workqueue(wimax_dev->name); - if (i2400m->work_queue == NULL) { - result = -ENOMEM; - dev_err(dev, "cannot create workqueue\n"); - goto error_create_workqueue; - } - if (i2400m->bus_dev_start) { - result = i2400m->bus_dev_start(i2400m); - if (result < 0) - goto error_bus_dev_start; - } - i2400m->ready = 1; - wmb(); /* see i2400m->ready's documentation */ - /* process pending reports from the device */ - queue_work(i2400m->work_queue, &i2400m->rx_report_ws); - result = i2400m_firmware_check(i2400m); /* fw versions ok? */ - if (result < 0) - goto error_fw_check; - /* At this point is ok to send commands to the device */ - result = i2400m_check_mac_addr(i2400m); - if (result < 0) - goto error_check_mac_addr; - result = i2400m_dev_initialize(i2400m); - if (result < 0) - goto error_dev_initialize; - - /* We don't want any additional unwanted error recovery triggered - * from any other context so if anything went wrong before we come - * here, let's keep i2400m->error_recovery untouched and leave it to - * dev_reset_handle(). See dev_reset_handle(). */ - - atomic_dec(&i2400m->error_recovery); - /* Every thing works so far, ok, now we are ready to - * take error recovery if it's required. */ - - /* At this point, reports will come for the device and set it - * to the right state if it is different than UNINITIALIZED */ - d_fnend(3, dev, "(net_dev %p [i2400m %p]) = %d\n", - net_dev, i2400m, result); - return result; - -error_dev_initialize: -error_check_mac_addr: -error_fw_check: - i2400m->ready = 0; - wmb(); /* see i2400m->ready's documentation */ - flush_workqueue(i2400m->work_queue); - if (i2400m->bus_dev_stop) - i2400m->bus_dev_stop(i2400m); -error_bus_dev_start: - destroy_workqueue(i2400m->work_queue); -error_create_workqueue: - i2400m_rx_release(i2400m); -error_rx_setup: - i2400m_tx_release(i2400m); -error_tx_setup: -error_bootstrap: - if (result == -EL3RST && times-- > 0) { - flags = I2400M_BRI_SOFT|I2400M_BRI_MAC_REINIT; - goto retry; - } - d_fnend(3, dev, "(net_dev %p [i2400m %p]) = %d\n", - net_dev, i2400m, result); - return result; -} - - -static -int i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri bm_flags) -{ - int result = 0; - mutex_lock(&i2400m->init_mutex); /* Well, start the device */ - if (i2400m->updown == 0) { - result = __i2400m_dev_start(i2400m, bm_flags); - if (result >= 0) { - i2400m->updown = 1; - i2400m->alive = 1; - wmb();/* see i2400m->updown and i2400m->alive's doc */ - } - } - mutex_unlock(&i2400m->init_mutex); - return result; -} - - -/** - * i2400m_dev_stop - Tear down driver communication with the device - * - * @i2400m: device descriptor - * - * Returns: 0 if ok, < 0 errno code on error. - * - * Releases all the resources allocated to communicate with the - * device. Note we cannot destroy the workqueue earlier as until RX is - * fully destroyed, it could still try to schedule jobs. - */ -static -void __i2400m_dev_stop(struct i2400m *i2400m) -{ - struct wimax_dev *wimax_dev = &i2400m->wimax_dev; - struct device *dev = i2400m_dev(i2400m); - - d_fnstart(3, dev, "(i2400m %p)\n", i2400m); - wimax_state_change(wimax_dev, __WIMAX_ST_QUIESCING); - i2400m_msg_to_dev_cancel_wait(i2400m, -EL3RST); - complete(&i2400m->msg_completion); - i2400m_net_wake_stop(i2400m); - i2400m_dev_shutdown(i2400m); - /* - * Make sure no report hooks are running *before* we stop the - * communication infrastructure with the device. - */ - i2400m->ready = 0; /* nobody can queue work anymore */ - wmb(); /* see i2400m->ready's documentation */ - flush_workqueue(i2400m->work_queue); - - if (i2400m->bus_dev_stop) - i2400m->bus_dev_stop(i2400m); - destroy_workqueue(i2400m->work_queue); - i2400m_rx_release(i2400m); - i2400m_tx_release(i2400m); - wimax_state_change(wimax_dev, WIMAX_ST_DOWN); - d_fnend(3, dev, "(i2400m %p) = 0\n", i2400m); -} - - -/* - * Watch out -- we only need to stop if there is a need for it. The - * device could have reset itself and failed to come up again (see - * _i2400m_dev_reset_handle()). - */ -static -void i2400m_dev_stop(struct i2400m *i2400m) -{ - mutex_lock(&i2400m->init_mutex); - if (i2400m->updown) { - __i2400m_dev_stop(i2400m); - i2400m->updown = 0; - i2400m->alive = 0; - wmb(); /* see i2400m->updown and i2400m->alive's doc */ - } - mutex_unlock(&i2400m->init_mutex); -} - - -/* - * Listen to PM events to cache the firmware before suspend/hibernation - * - * When the device comes out of suspend, it might go into reset and - * firmware has to be uploaded again. At resume, most of the times, we - * can't load firmware images from disk, so we need to cache it. - * - * i2400m_fw_cache() will allocate a kobject and attach the firmware - * to it; that way we don't have to worry too much about the fw loader - * hitting a race condition. - * - * Note: modus operandi stolen from the Orinoco driver; thx. - */ -static -int i2400m_pm_notifier(struct notifier_block *notifier, - unsigned long pm_event, - void *unused) -{ - struct i2400m *i2400m = - container_of(notifier, struct i2400m, pm_notifier); - struct device *dev = i2400m_dev(i2400m); - - d_fnstart(3, dev, "(i2400m %p pm_event %lx)\n", i2400m, pm_event); - switch (pm_event) { - case PM_HIBERNATION_PREPARE: - case PM_SUSPEND_PREPARE: - i2400m_fw_cache(i2400m); - break; - case PM_POST_RESTORE: - /* Restore from hibernation failed. We need to clean - * up in exactly the same way, so fall through. */ - case PM_POST_HIBERNATION: - case PM_POST_SUSPEND: - i2400m_fw_uncache(i2400m); - break; - - case PM_RESTORE_PREPARE: - default: - break; - } - d_fnend(3, dev, "(i2400m %p pm_event %lx) = void\n", i2400m, pm_event); - return NOTIFY_DONE; -} - - -/* - * pre-reset is called before a device is going on reset - * - * This has to be followed by a call to i2400m_post_reset(), otherwise - * bad things might happen. - */ -int i2400m_pre_reset(struct i2400m *i2400m) -{ - struct device *dev = i2400m_dev(i2400m); - - d_fnstart(3, dev, "(i2400m %p)\n", i2400m); - d_printf(1, dev, "pre-reset shut down\n"); - - mutex_lock(&i2400m->init_mutex); - if (i2400m->updown) { - netif_tx_disable(i2400m->wimax_dev.net_dev); - __i2400m_dev_stop(i2400m); - /* down't set updown to zero -- this way - * post_reset can restore properly */ - } - mutex_unlock(&i2400m->init_mutex); - if (i2400m->bus_release) - i2400m->bus_release(i2400m); - d_fnend(3, dev, "(i2400m %p) = 0\n", i2400m); - return 0; -} -EXPORT_SYMBOL_GPL(i2400m_pre_reset); - - -/* - * Restore device state after a reset - * - * Do the work needed after a device reset to bring it up to the same - * state as it was before the reset. - * - * NOTE: this requires i2400m->init_mutex taken - */ -int i2400m_post_reset(struct i2400m *i2400m) -{ - int result = 0; - struct device *dev = i2400m_dev(i2400m); - - d_fnstart(3, dev, "(i2400m %p)\n", i2400m); - d_printf(1, dev, "post-reset start\n"); - if (i2400m->bus_setup) { - result = i2400m->bus_setup(i2400m); - if (result < 0) { - dev_err(dev, "bus-specific setup failed: %d\n", - result); - goto error_bus_setup; - } - } - mutex_lock(&i2400m->init_mutex); - if (i2400m->updown) { - result = __i2400m_dev_start( - i2400m, I2400M_BRI_SOFT | I2400M_BRI_MAC_REINIT); - if (result < 0) - goto error_dev_start; - } - mutex_unlock(&i2400m->init_mutex); - d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result); - return result; - -error_dev_start: - if (i2400m->bus_release) - i2400m->bus_release(i2400m); - /* even if the device was up, it could not be recovered, so we - * mark it as down. */ - i2400m->updown = 0; - wmb(); /* see i2400m->updown's documentation */ - mutex_unlock(&i2400m->init_mutex); -error_bus_setup: - d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result); - return result; -} -EXPORT_SYMBOL_GPL(i2400m_post_reset); - - -/* - * The device has rebooted; fix up the device and the driver - * - * Tear down the driver communication with the device, reload the - * firmware and reinitialize the communication with the device. - * - * If someone calls a reset when the device's firmware is down, in - * theory we won't see it because we are not listening. However, just - * in case, leave the code to handle it. - * - * If there is a reset context, use it; this means someone is waiting - * for us to tell him when the reset operation is complete and the - * device is ready to rock again. - * - * NOTE: if we are in the process of bringing up or down the - * communication with the device [running i2400m_dev_start() or - * _stop()], don't do anything, let it fail and handle it. - * - * This function is ran always in a thread context - * - * This function gets passed, as payload to i2400m_work() a 'const - * char *' ptr with a "reason" why the reset happened (for messages). - */ -static -void __i2400m_dev_reset_handle(struct work_struct *ws) -{ - struct i2400m *i2400m = container_of(ws, struct i2400m, reset_ws); - const char *reason = i2400m->reset_reason; - struct device *dev = i2400m_dev(i2400m); - struct i2400m_reset_ctx *ctx = i2400m->reset_ctx; - int result; - - d_fnstart(3, dev, "(ws %p i2400m %p reason %s)\n", ws, i2400m, reason); - - i2400m->boot_mode = 1; - wmb(); /* Make sure i2400m_msg_to_dev() sees boot_mode */ - - result = 0; - if (mutex_trylock(&i2400m->init_mutex) == 0) { - /* We are still in i2400m_dev_start() [let it fail] or - * i2400m_dev_stop() [we are shutting down anyway, so - * ignore it] or we are resetting somewhere else. */ - dev_err(dev, "device rebooted somewhere else?\n"); - i2400m_msg_to_dev_cancel_wait(i2400m, -EL3RST); - complete(&i2400m->msg_completion); - goto out; - } - - dev_err(dev, "%s: reinitializing driver\n", reason); - rmb(); - if (i2400m->updown) { - __i2400m_dev_stop(i2400m); - i2400m->updown = 0; - wmb(); /* see i2400m->updown's documentation */ - } - - if (i2400m->alive) { - result = __i2400m_dev_start(i2400m, - I2400M_BRI_SOFT | I2400M_BRI_MAC_REINIT); - if (result < 0) { - dev_err(dev, "%s: cannot start the device: %d\n", - reason, result); - result = -EUCLEAN; - if (atomic_read(&i2400m->bus_reset_retries) - >= I2400M_BUS_RESET_RETRIES) { - result = -ENODEV; - dev_err(dev, "tried too many times to " - "reset the device, giving up\n"); - } - } - } - - if (i2400m->reset_ctx) { - ctx->result = result; - complete(&ctx->completion); - } - mutex_unlock(&i2400m->init_mutex); - if (result == -EUCLEAN) { - /* - * We come here because the reset during operational mode - * wasn't successfully done and need to proceed to a bus - * reset. For the dev_reset_handle() to be able to handle - * the reset event later properly, we restore boot_mode back - * to the state before previous reset. ie: just like we are - * issuing the bus reset for the first time - */ - i2400m->boot_mode = 0; - wmb(); - - atomic_inc(&i2400m->bus_reset_retries); - /* ops, need to clean up [w/ init_mutex not held] */ - result = i2400m_reset(i2400m, I2400M_RT_BUS); - if (result >= 0) - result = -ENODEV; - } else { - rmb(); - if (i2400m->alive) { - /* great, we expect the device state up and - * dev_start() actually brings the device state up */ - i2400m->updown = 1; - wmb(); - atomic_set(&i2400m->bus_reset_retries, 0); - } - } -out: - d_fnend(3, dev, "(ws %p i2400m %p reason %s) = void\n", - ws, i2400m, reason); -} - - -/* - * i2400m_dev_reset_handle - Handle a device's reset in a thread context - * - * Schedule a device reset handling out on a thread context, so it - * is safe to call from atomic context. We can't use the i2400m's - * queue as we are going to destroy it and reinitialize it as part of - * the driver bringup/bringup process. - * - * See __i2400m_dev_reset_handle() for details; that takes care of - * reinitializing the driver to handle the reset, calling into the - * bus-specific functions ops as needed. - */ -int i2400m_dev_reset_handle(struct i2400m *i2400m, const char *reason) -{ - i2400m->reset_reason = reason; - return schedule_work(&i2400m->reset_ws); -} -EXPORT_SYMBOL_GPL(i2400m_dev_reset_handle); - - -/* - * The actual work of error recovery. - * - * The current implementation of error recovery is to trigger a bus reset. - */ -static -void __i2400m_error_recovery(struct work_struct *ws) -{ - struct i2400m *i2400m = container_of(ws, struct i2400m, recovery_ws); - - i2400m_reset(i2400m, I2400M_RT_BUS); -} - -/* - * Schedule a work struct for error recovery. - * - * The intention of error recovery is to bring back the device to some - * known state whenever TX sees -110 (-ETIMEOUT) on copying the data to - * the device. The TX failure could mean a device bus stuck, so the current - * error recovery implementation is to trigger a bus reset to the device - * and hopefully it can bring back the device. - * - * The actual work of error recovery has to be in a thread context because - * it is kicked off in the TX thread (i2400ms->tx_workqueue) which is to be - * destroyed by the error recovery mechanism (currently a bus reset). - * - * Also, there may be already a queue of TX works that all hit - * the -ETIMEOUT error condition because the device is stuck already. - * Since bus reset is used as the error recovery mechanism and we don't - * want consecutive bus resets simply because the multiple TX works - * in the queue all hit the same device erratum, the flag "error_recovery" - * is introduced for preventing unwanted consecutive bus resets. - * - * Error recovery shall only be invoked again if previous one was completed. - * The flag error_recovery is set when error recovery mechanism is scheduled, - * and is checked when we need to schedule another error recovery. If it is - * in place already, then we shouldn't schedule another one. - */ -void i2400m_error_recovery(struct i2400m *i2400m) -{ - if (atomic_add_return(1, &i2400m->error_recovery) == 1) - schedule_work(&i2400m->recovery_ws); - else - atomic_dec(&i2400m->error_recovery); -} -EXPORT_SYMBOL_GPL(i2400m_error_recovery); - -/* - * Alloc the command and ack buffers for boot mode - * - * Get the buffers needed to deal with boot mode messages. - */ -static -int i2400m_bm_buf_alloc(struct i2400m *i2400m) -{ - i2400m->bm_cmd_buf = kzalloc(I2400M_BM_CMD_BUF_SIZE, GFP_KERNEL); - if (i2400m->bm_cmd_buf == NULL) - goto error_bm_cmd_kzalloc; - i2400m->bm_ack_buf = kzalloc(I2400M_BM_ACK_BUF_SIZE, GFP_KERNEL); - if (i2400m->bm_ack_buf == NULL) - goto error_bm_ack_buf_kzalloc; - return 0; - -error_bm_ack_buf_kzalloc: - kfree(i2400m->bm_cmd_buf); -error_bm_cmd_kzalloc: - return -ENOMEM; -} - - -/* - * Free boot mode command and ack buffers. - */ -static -void i2400m_bm_buf_free(struct i2400m *i2400m) -{ - kfree(i2400m->bm_ack_buf); - kfree(i2400m->bm_cmd_buf); -} - - -/* - * i2400m_init - Initialize a 'struct i2400m' from all zeroes - * - * This is a bus-generic API call. - */ -void i2400m_init(struct i2400m *i2400m) -{ - wimax_dev_init(&i2400m->wimax_dev); - - i2400m->boot_mode = 1; - i2400m->rx_reorder = 1; - init_waitqueue_head(&i2400m->state_wq); - - spin_lock_init(&i2400m->tx_lock); - i2400m->tx_pl_min = UINT_MAX; - i2400m->tx_size_min = UINT_MAX; - - spin_lock_init(&i2400m->rx_lock); - i2400m->rx_pl_min = UINT_MAX; - i2400m->rx_size_min = UINT_MAX; - INIT_LIST_HEAD(&i2400m->rx_reports); - INIT_WORK(&i2400m->rx_report_ws, i2400m_report_hook_work); - - mutex_init(&i2400m->msg_mutex); - init_completion(&i2400m->msg_completion); - - mutex_init(&i2400m->init_mutex); - /* wake_tx_ws is initialized in i2400m_tx_setup() */ - - INIT_WORK(&i2400m->reset_ws, __i2400m_dev_reset_handle); - INIT_WORK(&i2400m->recovery_ws, __i2400m_error_recovery); - - atomic_set(&i2400m->bus_reset_retries, 0); - - i2400m->alive = 0; - - /* initialize error_recovery to 1 for denoting we - * are not yet ready to take any error recovery */ - atomic_set(&i2400m->error_recovery, 1); -} -EXPORT_SYMBOL_GPL(i2400m_init); - - -int i2400m_reset(struct i2400m *i2400m, enum i2400m_reset_type rt) -{ - struct net_device *net_dev = i2400m->wimax_dev.net_dev; - - /* - * Make sure we stop TXs and down the carrier before - * resetting; this is needed to avoid things like - * i2400m_wake_tx() scheduling stuff in parallel. - */ - if (net_dev->reg_state == NETREG_REGISTERED) { - netif_tx_disable(net_dev); - netif_carrier_off(net_dev); - } - return i2400m->bus_reset(i2400m, rt); -} -EXPORT_SYMBOL_GPL(i2400m_reset); - - -/** - * i2400m_setup - bus-generic setup function for the i2400m device - * - * @i2400m: device descriptor (bus-specific parts have been initialized) - * @bm_flags: boot mode flags - * - * Returns: 0 if ok, < 0 errno code on error. - * - * Sets up basic device comunication infrastructure, boots the ROM to - * read the MAC address, registers with the WiMAX and network stacks - * and then brings up the device. - */ -int i2400m_setup(struct i2400m *i2400m, enum i2400m_bri bm_flags) -{ - int result; - struct device *dev = i2400m_dev(i2400m); - struct wimax_dev *wimax_dev = &i2400m->wimax_dev; - struct net_device *net_dev = i2400m->wimax_dev.net_dev; - - d_fnstart(3, dev, "(i2400m %p)\n", i2400m); - - snprintf(wimax_dev->name, sizeof(wimax_dev->name), - "i2400m-%s:%s", dev->bus->name, dev_name(dev)); - - result = i2400m_bm_buf_alloc(i2400m); - if (result < 0) { - dev_err(dev, "cannot allocate bootmode scratch buffers\n"); - goto error_bm_buf_alloc; - } - - if (i2400m->bus_setup) { - result = i2400m->bus_setup(i2400m); - if (result < 0) { - dev_err(dev, "bus-specific setup failed: %d\n", - result); - goto error_bus_setup; - } - } - - result = i2400m_bootrom_init(i2400m, bm_flags); - if (result < 0) { - dev_err(dev, "read mac addr: bootrom init " - "failed: %d\n", result); - goto error_bootrom_init; - } - result = i2400m_read_mac_addr(i2400m); - if (result < 0) - goto error_read_mac_addr; - eth_random_addr(i2400m->src_mac_addr); - - i2400m->pm_notifier.notifier_call = i2400m_pm_notifier; - register_pm_notifier(&i2400m->pm_notifier); - - result = register_netdev(net_dev); /* Okey dokey, bring it up */ - if (result < 0) { - dev_err(dev, "cannot register i2400m network device: %d\n", - result); - goto error_register_netdev; - } - netif_carrier_off(net_dev); - - i2400m->wimax_dev.op_msg_from_user = i2400m_op_msg_from_user; - i2400m->wimax_dev.op_rfkill_sw_toggle = i2400m_op_rfkill_sw_toggle; - i2400m->wimax_dev.op_reset = i2400m_op_reset; - - result = wimax_dev_add(&i2400m->wimax_dev, net_dev); - if (result < 0) - goto error_wimax_dev_add; - - /* Now setup all that requires a registered net and wimax device. */ - result = sysfs_create_group(&net_dev->dev.kobj, &i2400m_dev_attr_group); - if (result < 0) { - dev_err(dev, "cannot setup i2400m's sysfs: %d\n", result); - goto error_sysfs_setup; - } - - i2400m_debugfs_add(i2400m); - - result = i2400m_dev_start(i2400m, bm_flags); - if (result < 0) - goto error_dev_start; - d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result); - return result; - -error_dev_start: - i2400m_debugfs_rm(i2400m); - sysfs_remove_group(&i2400m->wimax_dev.net_dev->dev.kobj, - &i2400m_dev_attr_group); -error_sysfs_setup: - wimax_dev_rm(&i2400m->wimax_dev); -error_wimax_dev_add: - unregister_netdev(net_dev); -error_register_netdev: - unregister_pm_notifier(&i2400m->pm_notifier); -error_read_mac_addr: -error_bootrom_init: - if (i2400m->bus_release) - i2400m->bus_release(i2400m); -error_bus_setup: - i2400m_bm_buf_free(i2400m); -error_bm_buf_alloc: - d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result); - return result; -} -EXPORT_SYMBOL_GPL(i2400m_setup); - - -/* - * i2400m_release - release the bus-generic driver resources - * - * Sends a disconnect message and undoes any setup done by i2400m_setup() - */ -void i2400m_release(struct i2400m *i2400m) -{ - struct device *dev = i2400m_dev(i2400m); - - d_fnstart(3, dev, "(i2400m %p)\n", i2400m); - netif_stop_queue(i2400m->wimax_dev.net_dev); - - i2400m_dev_stop(i2400m); - - cancel_work_sync(&i2400m->reset_ws); - cancel_work_sync(&i2400m->recovery_ws); - - i2400m_debugfs_rm(i2400m); - sysfs_remove_group(&i2400m->wimax_dev.net_dev->dev.kobj, - &i2400m_dev_attr_group); - wimax_dev_rm(&i2400m->wimax_dev); - unregister_netdev(i2400m->wimax_dev.net_dev); - unregister_pm_notifier(&i2400m->pm_notifier); - if (i2400m->bus_release) - i2400m->bus_release(i2400m); - i2400m_bm_buf_free(i2400m); - d_fnend(3, dev, "(i2400m %p) = void\n", i2400m); -} -EXPORT_SYMBOL_GPL(i2400m_release); - - -/* - * Debug levels control; see debug.h - */ -struct d_level D_LEVEL[] = { - D_SUBMODULE_DEFINE(control), - D_SUBMODULE_DEFINE(driver), - D_SUBMODULE_DEFINE(debugfs), - D_SUBMODULE_DEFINE(fw), - D_SUBMODULE_DEFINE(netdev), - D_SUBMODULE_DEFINE(rfkill), - D_SUBMODULE_DEFINE(rx), - D_SUBMODULE_DEFINE(sysfs), - D_SUBMODULE_DEFINE(tx), -}; -size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); - - -static -int __init i2400m_driver_init(void) -{ - d_parse_params(D_LEVEL, D_LEVEL_SIZE, i2400m_debug_params, - "i2400m.debug"); - return i2400m_barker_db_init(i2400m_barkers_params); -} -module_init(i2400m_driver_init); - -static -void __exit i2400m_driver_exit(void) -{ - i2400m_barker_db_exit(); -} -module_exit(i2400m_driver_exit); - -MODULE_AUTHOR("Intel Corporation <linux-wimax@intel.com>"); -MODULE_DESCRIPTION("Intel 2400M WiMAX networking bus-generic driver"); -MODULE_LICENSE("GPL"); |