diff options
Diffstat (limited to 'drivers/tty/serial/mvebu-uart.c')
| -rw-r--r-- | drivers/tty/serial/mvebu-uart.c | 21 |
1 files changed, 12 insertions, 9 deletions
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 51b0ecabf2ec..231de29a6452 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -128,7 +128,6 @@ struct mvebu_uart { struct uart_port *port; struct clk *clk; int irq[UART_IRQ_COUNT]; - unsigned char __iomem *nb; struct mvebu_uart_driver_data *data; #if defined(CONFIG_PM) struct mvebu_uart_pm_regs pm_regs; @@ -445,12 +444,11 @@ static void mvebu_uart_shutdown(struct uart_port *port) static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) { - struct mvebu_uart *mvuart = to_mvuart(port); unsigned int d_divisor, m_divisor; u32 brdv, osamp; - if (IS_ERR(mvuart->clk)) - return -PTR_ERR(mvuart->clk); + if (!port->uartclk) + return -EOPNOTSUPP; /* * The baudrate is derived from the UART clock thanks to two divisors: @@ -463,7 +461,7 @@ static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) * makes use of D to configure the desired baudrate. */ m_divisor = OSAMP_DEFAULT_DIVISOR; - d_divisor = DIV_ROUND_UP(port->uartclk, baud * m_divisor); + d_divisor = DIV_ROUND_CLOSEST(port->uartclk, baud * m_divisor); brdv = readl(port->membase + UART_BRDV); brdv &= ~BRDV_BAUD_MASK; @@ -482,7 +480,7 @@ static void mvebu_uart_set_termios(struct uart_port *port, struct ktermios *old) { unsigned long flags; - unsigned int baud; + unsigned int baud, min_baud, max_baud; spin_lock_irqsave(&port->lock, flags); @@ -501,16 +499,21 @@ static void mvebu_uart_set_termios(struct uart_port *port, port->ignore_status_mask |= STAT_RX_RDY(port) | STAT_BRK_ERR; /* + * Maximal divisor is 1023 * 16 when using default (x16) scheme. * Maximum achievable frequency with simple baudrate divisor is 230400. * Since the error per bit frame would be of more than 15%, achieving * higher frequencies would require to implement the fractional divisor * feature. */ - baud = uart_get_baud_rate(port, termios, old, 0, 230400); + min_baud = DIV_ROUND_UP(port->uartclk, 1023 * 16); + max_baud = 230400; + + baud = uart_get_baud_rate(port, termios, old, min_baud, max_baud); if (mvebu_uart_baud_rate_set(port, baud)) { /* No clock available, baudrate cannot be changed */ if (old) - baud = uart_get_baud_rate(port, old, NULL, 0, 230400); + baud = uart_get_baud_rate(port, old, NULL, + min_baud, max_baud); } else { tty_termios_encode_baud_rate(termios, baud, baud); uart_update_timeout(port, termios->c_cflag, baud); @@ -617,7 +620,7 @@ static void mvebu_uart_putc(struct uart_port *port, int c) static void mvebu_uart_putc_early_write(struct console *con, const char *s, - unsigned n) + unsigned int n) { struct earlycon_device *dev = con->data; |