diff options
Diffstat (limited to 'drivers/usb/host/hwa-hc.c')
-rw-r--r-- | drivers/usb/host/hwa-hc.c | 875 |
1 files changed, 0 insertions, 875 deletions
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c deleted file mode 100644 index 6968b9f2b76b..000000000000 --- a/drivers/usb/host/hwa-hc.c +++ /dev/null @@ -1,875 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Host Wire Adapter: - * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * The HWA driver is a simple layer that forwards requests to the WAHC - * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host - * Controller) layers. - * - * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB - * Host Controller that is connected to your system via USB (a USB - * dongle that implements a USB host...). There is also a Device Wired - * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for - * transferring data (it is after all a USB host connected via - * Wireless USB), we have a common layer called Wire Adapter Host - * Controller that does all the hard work. The WUSBHC (Wireless USB - * Host Controller) is the part common to WUSB Host Controllers, the - * HWA and the PCI-based one, that is implemented following the WHCI - * spec. All these layers are implemented in ../wusbcore. - * - * The main functions are hwahc_op_urb_{en,de}queue(), that pass the - * job of converting a URB to a Wire Adapter - * - * Entry points: - * - * hwahc_driver_*() Driver initialization, registration and - * teardown. - * - * hwahc_probe() New device came up, create an instance for - * it [from device enumeration]. - * - * hwahc_disconnect() Remove device instance [from device - * enumeration]. - * - * [__]hwahc_op_*() Host-Wire-Adaptor specific functions for - * starting/stopping/etc (some might be made also - * DWA). - */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/workqueue.h> -#include <linux/wait.h> -#include <linux/completion.h> -#include "../wusbcore/wa-hc.h" -#include "../wusbcore/wusbhc.h" - -struct hwahc { - struct wusbhc wusbhc; /* has to be 1st */ - struct wahc wa; -}; - -/* - * FIXME should be wusbhc - * - * NOTE: we need to cache the Cluster ID because later...there is no - * way to get it :) - */ -static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id) -{ - int result; - struct wusbhc *wusbhc = &hwahc->wusbhc; - struct wahc *wa = &hwahc->wa; - struct device *dev = &wa->usb_iface->dev; - - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_CLUSTER_ID, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - cluster_id, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n", - cluster_id, result); - else - wusbhc->cluster_id = cluster_id; - dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id); - return result; -} - -static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_NUM_DNTS, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - interval << 8 | slots, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); -} - -/* - * Reset a WUSB host controller and wait for it to complete doing it. - * - * @usb_hcd: Pointer to WUSB Host Controller instance. - * - */ -static int hwahc_op_reset(struct usb_hcd *usb_hcd) -{ - int result; - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct device *dev = &hwahc->wa.usb_iface->dev; - - mutex_lock(&wusbhc->mutex); - wa_nep_disarm(&hwahc->wa); - result = __wa_set_feature(&hwahc->wa, WA_RESET); - if (result < 0) { - dev_err(dev, "error commanding HC to reset: %d\n", result); - goto error_unlock; - } - result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0); - if (result < 0) { - dev_err(dev, "error waiting for HC to reset: %d\n", result); - goto error_unlock; - } -error_unlock: - mutex_unlock(&wusbhc->mutex); - return result; -} - -/* - * FIXME: break this function up - */ -static int hwahc_op_start(struct usb_hcd *usb_hcd) -{ - u8 addr; - int result; - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - result = -ENOSPC; - mutex_lock(&wusbhc->mutex); - addr = wusb_cluster_id_get(); - if (addr == 0) - goto error_cluster_id_get; - result = __hwahc_set_cluster_id(hwahc, addr); - if (result < 0) - goto error_set_cluster_id; - - usb_hcd->uses_new_polling = 1; - set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags); - usb_hcd->state = HC_STATE_RUNNING; - - /* - * prevent USB core from suspending the root hub since - * bus_suspend and bus_resume are not yet supported. - */ - pm_runtime_get_noresume(&usb_hcd->self.root_hub->dev); - - result = 0; -out: - mutex_unlock(&wusbhc->mutex); - return result; - -error_set_cluster_id: - wusb_cluster_id_put(addr); -error_cluster_id_get: - goto out; - -} - -/* - * No need to abort pipes, as when this is called, all the children - * has been disconnected and that has done it [through - * usb_disable_interface() -> usb_disable_endpoint() -> - * hwahc_op_ep_disable() - >rpipe_ep_disable()]. - */ -static void hwahc_op_stop(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - - mutex_lock(&wusbhc->mutex); - wusb_cluster_id_put(wusbhc->cluster_id); - mutex_unlock(&wusbhc->mutex); -} - -static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - - /* - * We cannot query the HWA for the WUSB time since that requires sending - * a synchronous URB and this function can be called in_interrupt. - * Instead, query the USB frame number for our parent and use that. - */ - return usb_get_current_frame_number(wa->usb_dev); -} - -static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, - gfp_t gfp) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp); -} - -static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, - int status) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - return wa_urb_dequeue(&hwahc->wa, urb, status); -} - -/* - * Release resources allocated for an endpoint - * - * If there is an associated rpipe to this endpoint, go ahead and put it. - */ -static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd, - struct usb_host_endpoint *ep) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - rpipe_ep_disable(&hwahc->wa, ep); -} - -static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc) -{ - int result; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct device *dev = &hwahc->wa.usb_iface->dev; - - result = __wa_set_feature(&hwahc->wa, WA_ENABLE); - if (result < 0) { - dev_err(dev, "error commanding HC to start: %d\n", result); - goto error_stop; - } - result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE); - if (result < 0) { - dev_err(dev, "error waiting for HC to start: %d\n", result); - goto error_stop; - } - result = wa_nep_arm(&hwahc->wa, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "cannot listen to notifications: %d\n", result); - goto error_stop; - } - /* - * If WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS is set, - * disable transfer notifications. - */ - if (hwahc->wa.quirks & - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS) { - struct usb_host_interface *cur_altsetting = - hwahc->wa.usb_iface->cur_altsetting; - - result = usb_control_msg(hwahc->wa.usb_dev, - usb_sndctrlpipe(hwahc->wa.usb_dev, 0), - WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS, - USB_DIR_OUT | USB_TYPE_VENDOR | - USB_RECIP_INTERFACE, - WA_REQ_ALEREON_FEATURE_SET, - cur_altsetting->desc.bInterfaceNumber, - NULL, 0, - USB_CTRL_SET_TIMEOUT); - /* - * If we successfully sent the control message, start DTI here - * because no transfer notifications will be received which is - * where DTI is normally started. - */ - if (result == 0) - result = wa_dti_start(&hwahc->wa); - else - result = 0; /* OK. Continue normally. */ - - if (result < 0) { - dev_err(dev, "cannot start DTI: %d\n", result); - goto error_dti_start; - } - } - - return result; - -error_dti_start: - wa_nep_disarm(&hwahc->wa); -error_stop: - __wa_clear_feature(&hwahc->wa, WA_ENABLE); - return result; -} - -static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc, int delay) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - int ret; - - ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_CHAN_STOP, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - delay * 1000, - iface_no, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (ret == 0) - msleep(delay); - - wa_nep_disarm(&hwahc->wa); - __wa_stop(&hwahc->wa); -} - -/* - * Set the UWB MAS allocation for the WUSB cluster - * - * @stream_index: stream to use (-1 for cancelling the allocation) - * @mas: mas bitmap to use - */ -static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index, - const struct uwb_mas_bm *mas) -{ - int result; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - struct device *dev = &wa->usb_iface->dev; - u8 mas_le[UWB_NUM_MAS/8]; - - /* Set the stream index */ - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_STREAM_IDX, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - stream_index, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Cannot set WUSB stream index: %d\n", result); - goto out; - } - uwb_mas_bm_copy_le(mas_le, mas); - /* Set the MAS allocation */ - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_WUSB_MAS, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - mas_le, 32, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result); -out: - return result; -} - -/* - * Add an IE to the host's MMC - * - * @interval: See WUSB1.0[8.5.3.1] - * @repeat_cnt: See WUSB1.0[8.5.3.1] - * @handle: See WUSB1.0[8.5.3.1] - * @wuie: Pointer to the header of the WUSB IE data to add. - * MUST BE allocated in a kmalloc buffer (no stack or - * vmalloc). - * - * NOTE: the format of the WUSB IEs for MMCs are different to the - * normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length + - * Id in WUSB IEs). Standards...you gotta love'em. - */ -static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval, - u8 repeat_cnt, u8 handle, - struct wuie_hdr *wuie) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_ADD_MMC_IE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - interval << 8 | repeat_cnt, - handle << 8 | iface_no, - wuie, wuie->bLength, USB_CTRL_SET_TIMEOUT); -} - -/* - * Remove an IE to the host's MMC - * - * @handle: See WUSB1.0[8.5.3.1] - */ -static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_REMOVE_MMC_IE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, handle << 8 | iface_no, - NULL, 0, USB_CTRL_SET_TIMEOUT); -} - -/* - * Update device information for a given fake port - * - * @port_idx: Fake port to which device is connected (wusbhc index, not - * USB port number). - */ -static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc, - struct wusb_dev *wusb_dev) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - struct hwa_dev_info *dev_info; - int ret; - - /* fill out the Device Info buffer and send it */ - dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL); - if (!dev_info) - return -ENOMEM; - uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability, - &wusb_dev->availability); - dev_info->bDeviceAddress = wusb_dev->addr; - - /* - * If the descriptors haven't been read yet, use a default PHY - * rate of 53.3 Mbit/s only. The correct value will be used - * when this will be called again as part of the - * authentication process (which occurs after the descriptors - * have been read). - */ - if (wusb_dev->wusb_cap_descr) - dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates; - else - dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53); - - ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_DEV_INFO, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, wusb_dev->port_idx << 8 | iface_no, - dev_info, sizeof(struct hwa_dev_info), - USB_CTRL_SET_TIMEOUT); - kfree(dev_info); - return ret; -} - -/* - * Set host's idea of which encryption (and key) method to use when - * talking to ad evice on a given port. - * - * If key is NULL, it means disable encryption for that "virtual port" - * (used when we disconnect). - */ -static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *key, size_t key_size, - u8 key_idx) -{ - int result = -ENOMEM; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - struct usb_key_descriptor *keyd; - size_t keyd_len; - - keyd_len = sizeof(*keyd) + key_size; - keyd = kzalloc(keyd_len, GFP_KERNEL); - if (keyd == NULL) - return -ENOMEM; - - keyd->bLength = keyd_len; - keyd->bDescriptorType = USB_DT_KEY; - keyd->tTKID[0] = (tkid >> 0) & 0xff; - keyd->tTKID[1] = (tkid >> 8) & 0xff; - keyd->tTKID[2] = (tkid >> 16) & 0xff; - memcpy(keyd->bKeyData, key, key_size); - - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_SET_DESCRIPTOR, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - USB_DT_KEY << 8 | key_idx, - port_idx << 8 | iface_no, - keyd, keyd_len, USB_CTRL_SET_TIMEOUT); - - kzfree(keyd); /* clear keys etc. */ - return result; -} - -/* - * Set host's idea of which encryption (and key) method to use when - * talking to ad evice on a given port. - * - * If key is NULL, it means disable encryption for that "virtual port" - * (used when we disconnect). - */ -static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *key, size_t key_size) -{ - int result = -ENOMEM; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - u8 encryption_value; - - /* Tell the host which key to use to talk to the device */ - if (key) { - u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK, - WUSB_KEY_INDEX_ORIGINATOR_HOST); - - result = __hwahc_dev_set_key(wusbhc, port_idx, tkid, - key, key_size, key_idx); - if (result < 0) - goto error_set_key; - encryption_value = wusbhc->ccm1_etd->bEncryptionValue; - } else { - /* FIXME: this should come from wusbhc->etd[UNSECURE].value */ - encryption_value = 0; - } - - /* Set the encryption type for communicating with the device */ - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_SET_ENCRYPTION, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - encryption_value, port_idx << 8 | iface_no, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(wusbhc->dev, "Can't set host's WUSB encryption for " - "port index %u to %s (value %d): %d\n", port_idx, - wusb_et_name(wusbhc->ccm1_etd->bEncryptionType), - wusbhc->ccm1_etd->bEncryptionValue, result); -error_set_key: - return result; -} - -/* - * Set host's GTK key - */ -static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid, - const void *key, size_t key_size) -{ - u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK, - WUSB_KEY_INDEX_ORIGINATOR_HOST); - - return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx); -} - -/* - * Get the Wire Adapter class-specific descriptor - * - * NOTE: this descriptor comes with the big bundled configuration - * descriptor that includes the interfaces' and endpoints', so - * we just look for it in the cached copy kept by the USB stack. - * - * NOTE2: We convert LE fields to CPU order. - */ -static int wa_fill_descr(struct wahc *wa) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - char *itr; - struct usb_device *usb_dev = wa->usb_dev; - struct usb_descriptor_header *hdr; - struct usb_wa_descriptor *wa_descr; - size_t itr_size, actconfig_idx; - - actconfig_idx = (usb_dev->actconfig - usb_dev->config) / - sizeof(usb_dev->config[0]); - itr = usb_dev->rawdescriptors[actconfig_idx]; - itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); - while (itr_size >= sizeof(*hdr)) { - hdr = (struct usb_descriptor_header *) itr; - dev_dbg(dev, "Extra device descriptor: " - "type %02x/%u bytes @ %zu (%zu left)\n", - hdr->bDescriptorType, hdr->bLength, - (itr - usb_dev->rawdescriptors[actconfig_idx]), - itr_size); - if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER) - goto found; - itr += hdr->bLength; - itr_size -= hdr->bLength; - } - dev_err(dev, "cannot find Wire Adapter Class descriptor\n"); - return -ENODEV; - -found: - result = -EINVAL; - if (hdr->bLength > itr_size) { /* is it available? */ - dev_err(dev, "incomplete Wire Adapter Class descriptor " - "(%zu bytes left, %u needed)\n", - itr_size, hdr->bLength); - goto error; - } - if (hdr->bLength < sizeof(*wa->wa_descr)) { - dev_err(dev, "short Wire Adapter Class descriptor\n"); - goto error; - } - wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr; - if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100) - dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n", - (le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00) >> 8, - le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff); - result = 0; -error: - return result; -} - -static const struct hc_driver hwahc_hc_driver = { - .description = "hwa-hcd", - .product_desc = "Wireless USB HWA host controller", - .hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd), - .irq = NULL, /* FIXME */ - .flags = HCD_USB25, - .reset = hwahc_op_reset, - .start = hwahc_op_start, - .stop = hwahc_op_stop, - .get_frame_number = hwahc_op_get_frame_number, - .urb_enqueue = hwahc_op_urb_enqueue, - .urb_dequeue = hwahc_op_urb_dequeue, - .endpoint_disable = hwahc_op_endpoint_disable, - - .hub_status_data = wusbhc_rh_status_data, - .hub_control = wusbhc_rh_control, - .start_port_reset = wusbhc_rh_start_port_reset, -}; - -static int hwahc_security_create(struct hwahc *hwahc) -{ - int result; - struct wusbhc *wusbhc = &hwahc->wusbhc; - struct usb_device *usb_dev = hwahc->wa.usb_dev; - struct device *dev = &usb_dev->dev; - struct usb_security_descriptor *secd; - struct usb_encryption_descriptor *etd; - void *itr, *top; - size_t itr_size, needed, bytes; - u8 index; - char buf[64]; - - /* Find the host's security descriptors in the config descr bundle */ - index = (usb_dev->actconfig - usb_dev->config) / - sizeof(usb_dev->config[0]); - itr = usb_dev->rawdescriptors[index]; - itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); - top = itr + itr_size; - result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index], - le16_to_cpu(usb_dev->actconfig->desc.wTotalLength), - USB_DT_SECURITY, (void **) &secd, sizeof(*secd)); - if (result == -1) { - dev_warn(dev, "BUG? WUSB host has no security descriptors\n"); - return 0; - } - needed = sizeof(*secd); - if (top - (void *)secd < needed) { - dev_err(dev, "BUG? Not enough data to process security " - "descriptor header (%zu bytes left vs %zu needed)\n", - top - (void *) secd, needed); - return 0; - } - needed = le16_to_cpu(secd->wTotalLength); - if (top - (void *)secd < needed) { - dev_err(dev, "BUG? Not enough data to process security " - "descriptors (%zu bytes left vs %zu needed)\n", - top - (void *) secd, needed); - return 0; - } - /* Walk over the sec descriptors and store CCM1's on wusbhc */ - itr = (void *) secd + sizeof(*secd); - top = (void *) secd + le16_to_cpu(secd->wTotalLength); - index = 0; - bytes = 0; - while (itr < top) { - etd = itr; - if (top - itr < sizeof(*etd)) { - dev_err(dev, "BUG: bad host security descriptor; " - "not enough data (%zu vs %zu left)\n", - top - itr, sizeof(*etd)); - break; - } - if (etd->bLength < sizeof(*etd)) { - dev_err(dev, "BUG: bad host encryption descriptor; " - "descriptor is too short " - "(%zu vs %zu needed)\n", - (size_t)etd->bLength, sizeof(*etd)); - break; - } - itr += etd->bLength; - bytes += snprintf(buf + bytes, sizeof(buf) - bytes, - "%s (0x%02x) ", - wusb_et_name(etd->bEncryptionType), - etd->bEncryptionValue); - wusbhc->ccm1_etd = etd; - } - dev_info(dev, "supported encryption types: %s\n", buf); - if (wusbhc->ccm1_etd == NULL) { - dev_err(dev, "E: host doesn't support CCM-1 crypto\n"); - return 0; - } - /* Pretty print what we support */ - return 0; -} - -static void hwahc_security_release(struct hwahc *hwahc) -{ - /* nothing to do here so far... */ -} - -static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface, - kernel_ulong_t quirks) -{ - int result; - struct device *dev = &iface->dev; - struct wusbhc *wusbhc = &hwahc->wusbhc; - struct wahc *wa = &hwahc->wa; - struct usb_device *usb_dev = interface_to_usbdev(iface); - - wa->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ - wa->usb_iface = usb_get_intf(iface); - wusbhc->dev = dev; - /* defer getting the uwb_rc handle until it is needed since it - * may not have been registered by the hwa_rc driver yet. */ - wusbhc->uwb_rc = NULL; - result = wa_fill_descr(wa); /* Get the device descriptor */ - if (result < 0) - goto error_fill_descriptor; - if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) { - dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB " - "adapter (%u ports)\n", wa->wa_descr->bNumPorts); - wusbhc->ports_max = USB_MAXCHILDREN; - } else { - wusbhc->ports_max = wa->wa_descr->bNumPorts; - } - wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs; - wusbhc->start = __hwahc_op_wusbhc_start; - wusbhc->stop = __hwahc_op_wusbhc_stop; - wusbhc->mmcie_add = __hwahc_op_mmcie_add; - wusbhc->mmcie_rm = __hwahc_op_mmcie_rm; - wusbhc->dev_info_set = __hwahc_op_dev_info_set; - wusbhc->bwa_set = __hwahc_op_bwa_set; - wusbhc->set_num_dnts = __hwahc_op_set_num_dnts; - wusbhc->set_ptk = __hwahc_op_set_ptk; - wusbhc->set_gtk = __hwahc_op_set_gtk; - result = hwahc_security_create(hwahc); - if (result < 0) { - dev_err(dev, "Can't initialize security: %d\n", result); - goto error_security_create; - } - wa->wusb = wusbhc; /* FIXME: ugly, need to fix */ - result = wusbhc_create(&hwahc->wusbhc); - if (result < 0) { - dev_err(dev, "Can't create WUSB HC structures: %d\n", result); - goto error_wusbhc_create; - } - result = wa_create(&hwahc->wa, iface, quirks); - if (result < 0) - goto error_wa_create; - return 0; - -error_wa_create: - wusbhc_destroy(&hwahc->wusbhc); -error_wusbhc_create: - /* WA Descr fill allocs no resources */ -error_security_create: -error_fill_descriptor: - usb_put_intf(iface); - usb_put_dev(usb_dev); - return result; -} - -static void hwahc_destroy(struct hwahc *hwahc) -{ - struct wusbhc *wusbhc = &hwahc->wusbhc; - - mutex_lock(&wusbhc->mutex); - __wa_destroy(&hwahc->wa); - wusbhc_destroy(&hwahc->wusbhc); - hwahc_security_release(hwahc); - hwahc->wusbhc.dev = NULL; - uwb_rc_put(wusbhc->uwb_rc); - usb_put_intf(hwahc->wa.usb_iface); - usb_put_dev(hwahc->wa.usb_dev); - mutex_unlock(&wusbhc->mutex); -} - -static void hwahc_init(struct hwahc *hwahc) -{ - wa_init(&hwahc->wa); -} - -static int hwahc_probe(struct usb_interface *usb_iface, - const struct usb_device_id *id) -{ - int result; - struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc; - struct hwahc *hwahc; - struct device *dev = &usb_iface->dev; - - result = -ENOMEM; - usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa"); - if (usb_hcd == NULL) { - dev_err(dev, "unable to allocate instance\n"); - goto error_alloc; - } - usb_hcd->wireless = 1; - usb_hcd->self.sg_tablesize = ~0; - wusbhc = usb_hcd_to_wusbhc(usb_hcd); - hwahc = container_of(wusbhc, struct hwahc, wusbhc); - hwahc_init(hwahc); - result = hwahc_create(hwahc, usb_iface, id->driver_info); - if (result < 0) { - dev_err(dev, "Cannot initialize internals: %d\n", result); - goto error_hwahc_create; - } - result = usb_add_hcd(usb_hcd, 0, 0); - if (result < 0) { - dev_err(dev, "Cannot add HCD: %d\n", result); - goto error_add_hcd; - } - device_wakeup_enable(usb_hcd->self.controller); - result = wusbhc_b_create(&hwahc->wusbhc); - if (result < 0) { - dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result); - goto error_wusbhc_b_create; - } - return 0; - -error_wusbhc_b_create: - usb_remove_hcd(usb_hcd); -error_add_hcd: - hwahc_destroy(hwahc); -error_hwahc_create: - usb_put_hcd(usb_hcd); -error_alloc: - return result; -} - -static void hwahc_disconnect(struct usb_interface *usb_iface) -{ - struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc; - struct hwahc *hwahc; - - usb_hcd = usb_get_intfdata(usb_iface); - wusbhc = usb_hcd_to_wusbhc(usb_hcd); - hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - wusbhc_b_destroy(&hwahc->wusbhc); - usb_remove_hcd(usb_hcd); - hwahc_destroy(hwahc); - usb_put_hcd(usb_hcd); -} - -static const struct usb_device_id hwahc_id_table[] = { - /* Alereon 5310 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x02, 0x01), - .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC | - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS }, - /* Alereon 5611 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x02, 0x01), - .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC | - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS }, - /* FIXME: use class labels for this */ - { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), }, - {}, -}; -MODULE_DEVICE_TABLE(usb, hwahc_id_table); - -static struct usb_driver hwahc_driver = { - .name = "hwa-hc", - .probe = hwahc_probe, - .disconnect = hwahc_disconnect, - .id_table = hwahc_id_table, -}; - -module_usb_driver(hwahc_driver); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver"); -MODULE_LICENSE("GPL"); |