diff options
Diffstat (limited to 'drivers/usb/wusbcore/rh.c')
-rw-r--r-- | drivers/usb/wusbcore/rh.c | 426 |
1 files changed, 0 insertions, 426 deletions
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c deleted file mode 100644 index 20c08cd9dcbf..000000000000 --- a/drivers/usb/wusbcore/rh.c +++ /dev/null @@ -1,426 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Host Controller - * Root Hub operations - * - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * We fake a root hub that has fake ports (as many as simultaneous - * devices the Wireless USB Host Controller can deal with). For each - * port we keep an state in @wusbhc->port[index] identical to the one - * specified in the USB2.0[ch11] spec and some extra device - * information that complements the one in 'struct usb_device' (as - * this lacs a hcpriv pointer). - * - * Note this is common to WHCI and HWA host controllers. - * - * Through here we enable most of the state changes that the USB stack - * will use to connect or disconnect devices. We need to do some - * forced adaptation of Wireless USB device states vs. wired: - * - * USB: WUSB: - * - * Port Powered-off port slot n/a - * Powered-on port slot available - * Disconnected port slot available - * Connected port slot assigned device - * device sent DN_Connect - * device was authenticated - * Enabled device is authenticated, transitioned - * from unauth -> auth -> default address - * -> enabled - * Reset disconnect - * Disable disconnect - * - * This maps the standard USB port states with the WUSB device states - * so we can fake ports without having to modify the USB stack. - * - * FIXME: this process will change in the future - * - * - * ENTRY POINTS - * - * Our entry points into here are, as in hcd.c, the USB stack root hub - * ops defined in the usb_hcd struct: - * - * wusbhc_rh_status_data() Provide hub and port status data bitmap - * - * wusbhc_rh_control() Execution of all the major requests - * you can do to a hub (Set|Clear - * features, get descriptors, status, etc). - * - * wusbhc_rh_[suspend|resume]() That - * - * wusbhc_rh_start_port_reset() ??? unimplemented - */ -#include <linux/slab.h> -#include <linux/export.h> -#include "wusbhc.h" - -/* - * Reset a fake port - * - * Using a Reset Device IE is too heavyweight as it causes the device - * to enter the UnConnected state and leave the cluster, this can mean - * that when the device reconnects it is connected to a different fake - * port. - * - * Instead, reset authenticated devices with a SetAddress(0), followed - * by a SetAddresss(AuthAddr). - * - * For unauthenticated devices just pretend to reset but do nothing. - * If the device initialization continues to fail it will eventually - * time out after TrustTimeout and enter the UnConnected state. - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - * - * Supposedly we are the only thread accesing @wusbhc->port; in any - * case, maybe we should move the mutex locking from - * wusbhc_devconnect_auth() to here. - * - * @port_idx refers to the wusbhc's port index, not the USB port number - */ -static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) -{ - int result = 0; - struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); - struct wusb_dev *wusb_dev = port->wusb_dev; - - if (wusb_dev == NULL) - return -ENOTCONN; - - port->status |= USB_PORT_STAT_RESET; - port->change |= USB_PORT_STAT_C_RESET; - - if (wusb_dev->addr & WUSB_DEV_ADDR_UNAUTH) - result = 0; - else - result = wusb_dev_update_address(wusbhc, wusb_dev); - - port->status &= ~USB_PORT_STAT_RESET; - port->status |= USB_PORT_STAT_ENABLE; - port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE; - - return result; -} - -/* - * Return the hub change status bitmap - * - * The bits in the change status bitmap are cleared when a - * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4]. - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - * - * WARNING!! This gets called from atomic context; we cannot get the - * mutex--the only race condition we can find is some bit - * changing just after we copy it, which shouldn't be too - * big of a problem [and we can't make it an spinlock - * because other parts need to take it and sleep] . - * - * @usb_hcd is refcounted, so it won't disappear under us - * and before killing a host, the polling of the root hub - * would be stopped anyway. - */ -int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - size_t cnt, size, bits_set = 0; - - /* WE DON'T LOCK, see comment */ - /* round up to bytes. Hub bit is bit 0 so add 1. */ - size = DIV_ROUND_UP(wusbhc->ports_max + 1, 8); - - /* clear the output buffer. */ - memset(_buf, 0, size); - /* set the bit for each changed port. */ - for (cnt = 0; cnt < wusbhc->ports_max; cnt++) { - - if (wusb_port_by_idx(wusbhc, cnt)->change) { - const int bitpos = cnt+1; - - _buf[bitpos/8] |= (1 << (bitpos % 8)); - bits_set++; - } - } - - return bits_set ? size : 0; -} -EXPORT_SYMBOL_GPL(wusbhc_rh_status_data); - -/* - * Return the hub's descriptor - * - * NOTE: almost cut and paste from ehci-hub.c - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked - */ -static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue, - u16 wIndex, - struct usb_hub_descriptor *descr, - u16 wLength) -{ - u16 temp = 1 + (wusbhc->ports_max / 8); - u8 length = 7 + 2 * temp; - - if (wLength < length) - return -ENOSPC; - descr->bDescLength = 7 + 2 * temp; - descr->bDescriptorType = USB_DT_HUB; /* HUB type */ - descr->bNbrPorts = wusbhc->ports_max; - descr->wHubCharacteristics = cpu_to_le16( - HUB_CHAR_COMMON_LPSM /* All ports power at once */ - | 0x00 /* not part of compound device */ - | HUB_CHAR_NO_OCPM /* No overcurrent protection */ - | 0x00 /* 8 FS think time FIXME ?? */ - | 0x00); /* No port indicators */ - descr->bPwrOn2PwrGood = 0; - descr->bHubContrCurrent = 0; - /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ - memset(&descr->u.hs.DeviceRemovable[0], 0, temp); - memset(&descr->u.hs.DeviceRemovable[temp], 0xff, temp); - return 0; -} - -/* - * Clear a hub feature - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - * - * Nothing to do, so no locking needed ;) - */ -static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature) -{ - int result; - - switch (feature) { - case C_HUB_LOCAL_POWER: - /* FIXME: maybe plug bit 0 to the power input status, - * if any? - * see wusbhc_rh_get_hub_status() */ - case C_HUB_OVER_CURRENT: - result = 0; - break; - default: - result = -EPIPE; - } - return result; -} - -/* - * Return hub status (it is always zero...) - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - * - * Nothing to do, so no locking needed ;) - */ -static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf, - u16 wLength) -{ - /* FIXME: maybe plug bit 0 to the power input status (if any)? */ - *buf = 0; - return 0; -} - -/* - * Set a port feature - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - */ -static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature, - u8 selector, u8 port_idx) -{ - struct device *dev = wusbhc->dev; - - if (port_idx > wusbhc->ports_max) - return -EINVAL; - - switch (feature) { - /* According to USB2.0[11.24.2.13]p2, these features - * are not required to be implemented. */ - case USB_PORT_FEAT_C_OVER_CURRENT: - case USB_PORT_FEAT_C_ENABLE: - case USB_PORT_FEAT_C_SUSPEND: - case USB_PORT_FEAT_C_CONNECTION: - case USB_PORT_FEAT_C_RESET: - return 0; - case USB_PORT_FEAT_POWER: - /* No such thing, but we fake it works */ - mutex_lock(&wusbhc->mutex); - wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER; - mutex_unlock(&wusbhc->mutex); - return 0; - case USB_PORT_FEAT_RESET: - return wusbhc_rh_port_reset(wusbhc, port_idx); - case USB_PORT_FEAT_ENABLE: - case USB_PORT_FEAT_SUSPEND: - dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n", - port_idx, feature, selector); - return -ENOSYS; - default: - dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n", - port_idx, feature, selector); - return -EPIPE; - } - - return 0; -} - -/* - * Clear a port feature... - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - */ -static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature, - u8 selector, u8 port_idx) -{ - int result = 0; - struct device *dev = wusbhc->dev; - - if (port_idx > wusbhc->ports_max) - return -EINVAL; - - mutex_lock(&wusbhc->mutex); - switch (feature) { - case USB_PORT_FEAT_POWER: /* fake port always on */ - /* According to USB2.0[11.24.2.7.1.4], no need to implement? */ - case USB_PORT_FEAT_C_OVER_CURRENT: - break; - case USB_PORT_FEAT_C_RESET: - wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET; - break; - case USB_PORT_FEAT_C_CONNECTION: - wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION; - break; - case USB_PORT_FEAT_ENABLE: - __wusbhc_dev_disable(wusbhc, port_idx); - break; - case USB_PORT_FEAT_C_ENABLE: - wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE; - break; - case USB_PORT_FEAT_SUSPEND: - case USB_PORT_FEAT_C_SUSPEND: - dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n", - port_idx, feature, selector); - result = -ENOSYS; - break; - default: - dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n", - port_idx, feature, selector); - result = -EPIPE; - break; - } - mutex_unlock(&wusbhc->mutex); - - return result; -} - -/* - * Return the port's status - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - */ -static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx, - u32 *_buf, u16 wLength) -{ - __le16 *buf = (__le16 *)_buf; - - if (port_idx > wusbhc->ports_max) - return -EINVAL; - - mutex_lock(&wusbhc->mutex); - buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status); - buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change); - mutex_unlock(&wusbhc->mutex); - - return 0; -} - -/* - * Entry point for Root Hub operations - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - */ -int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue, - u16 wIndex, char *buf, u16 wLength) -{ - int result = -ENOSYS; - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - - switch (reqntype) { - case GetHubDescriptor: - result = wusbhc_rh_get_hub_descr( - wusbhc, wValue, wIndex, - (struct usb_hub_descriptor *) buf, wLength); - break; - case ClearHubFeature: - result = wusbhc_rh_clear_hub_feat(wusbhc, wValue); - break; - case GetHubStatus: - result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength); - break; - - case SetPortFeature: - result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8, - (wIndex & 0xff) - 1); - break; - case ClearPortFeature: - result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8, - (wIndex & 0xff) - 1); - break; - case GetPortStatus: - result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1, - (u32 *)buf, wLength); - break; - - case SetHubFeature: - default: - dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) " - "UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype, - wValue, wIndex, buf, wLength); - /* dump_stack(); */ - result = -ENOSYS; - } - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_rh_control); - -int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n", - __func__, usb_hcd, wusbhc, port_idx); - WARN_ON(1); - return -ENOSYS; -} -EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset); - -static void wusb_port_init(struct wusb_port *port) -{ - port->status |= USB_PORT_STAT_HIGH_SPEED; -} - -/* - * Alloc fake port specific fields and status. - */ -int wusbhc_rh_create(struct wusbhc *wusbhc) -{ - int result = -ENOMEM; - size_t port_size, itr; - port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]); - wusbhc->port = kzalloc(port_size, GFP_KERNEL); - if (wusbhc->port == NULL) - goto error_port_alloc; - for (itr = 0; itr < wusbhc->ports_max; itr++) - wusb_port_init(&wusbhc->port[itr]); - result = 0; -error_port_alloc: - return result; -} - -void wusbhc_rh_destroy(struct wusbhc *wusbhc) -{ - kfree(wusbhc->port); -} |