summaryrefslogtreecommitdiff
path: root/drivers/w1
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/w1')
-rw-r--r--drivers/w1/masters/Kconfig9
-rw-r--r--drivers/w1/masters/Makefile1
-rw-r--r--drivers/w1/masters/mxc_w1.c4
-rw-r--r--drivers/w1/masters/omap_hdq.c4
-rw-r--r--drivers/w1/masters/sgi_w1.c130
-rw-r--r--drivers/w1/slaves/Kconfig6
-rw-r--r--drivers/w1/slaves/Makefile1
-rw-r--r--drivers/w1/slaves/w1_ds250x.c290
8 files changed, 439 insertions, 6 deletions
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 7ae260577901..24b9a8e05f64 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -65,5 +65,14 @@ config HDQ_MASTER_OMAP
Say Y here if you want support for the 1-wire or HDQ Interface
on an OMAP processor.
+config W1_MASTER_SGI
+ tristate "SGI ASIC driver"
+ help
+ Say Y here if you want support for your 1-wire devices using
+ SGI ASIC 1-Wire interface
+
+ This support is also available as a module. If so, the module
+ will be called sgi_w1.
+
endmenu
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
index 18954cae4256..dae629b7ab49 100644
--- a/drivers/w1/masters/Makefile
+++ b/drivers/w1/masters/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_W1_MASTER_MXC) += mxc_w1.o
obj-$(CONFIG_W1_MASTER_DS1WM) += ds1wm.o
obj-$(CONFIG_W1_MASTER_GPIO) += w1-gpio.o
obj-$(CONFIG_HDQ_MASTER_OMAP) += omap_hdq.o
+obj-$(CONFIG_W1_MASTER_SGI) += sgi_w1.o
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index c3b2095ef6a9..1ca880e01476 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -92,7 +92,6 @@ static int mxc_w1_probe(struct platform_device *pdev)
{
struct mxc_w1_device *mdev;
unsigned long clkrate;
- struct resource *res;
unsigned int clkdiv;
int err;
@@ -120,8 +119,7 @@ static int mxc_w1_probe(struct platform_device *pdev)
dev_warn(&pdev->dev,
"Incorrect time base frequency %lu Hz\n", clkrate);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mdev->regs = devm_ioremap_resource(&pdev->dev, res);
+ mdev->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(mdev->regs)) {
err = PTR_ERR(mdev->regs);
goto out_disable_clk;
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 3099052e1243..4164045866b3 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -660,7 +660,6 @@ static int omap_hdq_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct hdq_data *hdq_data;
- struct resource *res;
int ret, irq;
u8 rev;
const char *mode;
@@ -674,8 +673,7 @@ static int omap_hdq_probe(struct platform_device *pdev)
hdq_data->dev = dev;
platform_set_drvdata(pdev, hdq_data);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hdq_data->hdq_base = devm_ioremap_resource(dev, res);
+ hdq_data->hdq_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(hdq_data->hdq_base))
return PTR_ERR(hdq_data->hdq_base);
diff --git a/drivers/w1/masters/sgi_w1.c b/drivers/w1/masters/sgi_w1.c
new file mode 100644
index 000000000000..1b2d96b945be
--- /dev/null
+++ b/drivers/w1/masters/sgi_w1.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * sgi_w1.c - w1 master driver for one wire support in SGI ASICs
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/sgi-w1.h>
+
+#include <linux/w1.h>
+
+#define MCR_RD_DATA BIT(0)
+#define MCR_DONE BIT(1)
+
+#define MCR_PACK(pulse, sample) (((pulse) << 10) | ((sample) << 2))
+
+struct sgi_w1_device {
+ u32 __iomem *mcr;
+ struct w1_bus_master bus_master;
+ char dev_id[64];
+};
+
+static u8 sgi_w1_wait(u32 __iomem *mcr)
+{
+ u32 mcr_val;
+
+ do {
+ mcr_val = readl(mcr);
+ } while (!(mcr_val & MCR_DONE));
+
+ return (mcr_val & MCR_RD_DATA) ? 1 : 0;
+}
+
+/*
+ * this is the low level routine to
+ * reset the device on the One Wire interface
+ * on the hardware
+ */
+static u8 sgi_w1_reset_bus(void *data)
+{
+ struct sgi_w1_device *dev = data;
+ u8 ret;
+
+ writel(MCR_PACK(520, 65), dev->mcr);
+ ret = sgi_w1_wait(dev->mcr);
+ udelay(500); /* recovery time */
+ return ret;
+}
+
+/*
+ * this is the low level routine to read/write a bit on the One Wire
+ * interface on the hardware. It does write 0 if parameter bit is set
+ * to 0, otherwise a write 1/read.
+ */
+static u8 sgi_w1_touch_bit(void *data, u8 bit)
+{
+ struct sgi_w1_device *dev = data;
+ u8 ret;
+
+ if (bit)
+ writel(MCR_PACK(6, 13), dev->mcr);
+ else
+ writel(MCR_PACK(80, 30), dev->mcr);
+
+ ret = sgi_w1_wait(dev->mcr);
+ if (bit)
+ udelay(100); /* recovery */
+ return ret;
+}
+
+static int sgi_w1_probe(struct platform_device *pdev)
+{
+ struct sgi_w1_device *sdev;
+ struct sgi_w1_platform_data *pdata;
+ struct resource *res;
+
+ sdev = devm_kzalloc(&pdev->dev, sizeof(struct sgi_w1_device),
+ GFP_KERNEL);
+ if (!sdev)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sdev->mcr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(sdev->mcr))
+ return PTR_ERR(sdev->mcr);
+
+ sdev->bus_master.data = sdev;
+ sdev->bus_master.reset_bus = sgi_w1_reset_bus;
+ sdev->bus_master.touch_bit = sgi_w1_touch_bit;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (pdata) {
+ strlcpy(sdev->dev_id, pdata->dev_id, sizeof(sdev->dev_id));
+ sdev->bus_master.dev_id = sdev->dev_id;
+ }
+
+ platform_set_drvdata(pdev, sdev);
+
+ return w1_add_master_device(&sdev->bus_master);
+}
+
+/*
+ * disassociate the w1 device from the driver
+ */
+static int sgi_w1_remove(struct platform_device *pdev)
+{
+ struct sgi_w1_device *sdev = platform_get_drvdata(pdev);
+
+ w1_remove_master_device(&sdev->bus_master);
+
+ return 0;
+}
+
+static struct platform_driver sgi_w1_driver = {
+ .driver = {
+ .name = "sgi_w1",
+ },
+ .probe = sgi_w1_probe,
+ .remove = sgi_w1_remove,
+};
+module_platform_driver(sgi_w1_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Bogendoerfer");
+MODULE_DESCRIPTION("Driver for One-Wire IP in SGI ASICs");
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 37aaad26b373..ebed495b9e69 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -101,6 +101,12 @@ config W1_SLAVE_DS2438
Say Y here if you want to use a 1-wire
DS2438 Smart Battery Monitor device support
+config W1_SLAVE_DS250X
+ tristate "512b/1kb/16kb EPROM family support"
+ help
+ Say Y here if you want to use a 1-wire
+ 512b/1kb/16kb EPROM family device (DS250x).
+
config W1_SLAVE_DS2780
tristate "Dallas 2780 battery monitor chip"
help
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index eab29f151413..8e9655eaa478 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
obj-$(CONFIG_W1_SLAVE_DS2805) += w1_ds2805.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
obj-$(CONFIG_W1_SLAVE_DS2438) += w1_ds2438.o
+obj-$(CONFIG_W1_SLAVE_DS250X) += w1_ds250x.o
obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o
obj-$(CONFIG_W1_SLAVE_DS28E04) += w1_ds28e04.o
diff --git a/drivers/w1/slaves/w1_ds250x.c b/drivers/w1/slaves/w1_ds250x.c
new file mode 100644
index 000000000000..e507117444d8
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds250x.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * w1_ds250x.c - w1 family 09/0b/89/91 (DS250x) driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/crc16.h>
+
+#include <linux/w1.h>
+#include <linux/nvmem-provider.h>
+
+#define W1_DS2501_UNW_FAMILY 0x91
+#define W1_DS2501_SIZE 64
+
+#define W1_DS2502_FAMILY 0x09
+#define W1_DS2502_UNW_FAMILY 0x89
+#define W1_DS2502_SIZE 128
+
+#define W1_DS2505_FAMILY 0x0b
+#define W1_DS2505_SIZE 2048
+
+#define W1_PAGE_SIZE 32
+
+#define W1_EXT_READ_MEMORY 0xA5
+#define W1_READ_DATA_CRC 0xC3
+
+#define OFF2PG(off) ((off) / W1_PAGE_SIZE)
+
+#define CRC16_INIT 0
+#define CRC16_VALID 0xb001
+
+struct w1_eprom_data {
+ size_t size;
+ int (*read)(struct w1_slave *sl, int pageno);
+ u8 eprom[W1_DS2505_SIZE];
+ DECLARE_BITMAP(page_present, W1_DS2505_SIZE / W1_PAGE_SIZE);
+ char nvmem_name[64];
+};
+
+static int w1_ds2502_read_page(struct w1_slave *sl, int pageno)
+{
+ struct w1_eprom_data *data = sl->family_data;
+ int pgoff = pageno * W1_PAGE_SIZE;
+ int ret = -EIO;
+ u8 buf[3];
+ u8 crc8;
+
+ if (test_bit(pageno, data->page_present))
+ return 0; /* page already present */
+
+ mutex_lock(&sl->master->bus_mutex);
+
+ if (w1_reset_select_slave(sl))
+ goto err;
+
+ buf[0] = W1_READ_DATA_CRC;
+ buf[1] = pgoff & 0xff;
+ buf[2] = pgoff >> 8;
+ w1_write_block(sl->master, buf, 3);
+
+ crc8 = w1_read_8(sl->master);
+ if (w1_calc_crc8(buf, 3) != crc8)
+ goto err;
+
+ w1_read_block(sl->master, &data->eprom[pgoff], W1_PAGE_SIZE);
+
+ crc8 = w1_read_8(sl->master);
+ if (w1_calc_crc8(&data->eprom[pgoff], W1_PAGE_SIZE) != crc8)
+ goto err;
+
+ set_bit(pageno, data->page_present); /* mark page present */
+ ret = 0;
+err:
+ mutex_unlock(&sl->master->bus_mutex);
+ return ret;
+}
+
+static int w1_ds2505_read_page(struct w1_slave *sl, int pageno)
+{
+ struct w1_eprom_data *data = sl->family_data;
+ int redir_retries = 16;
+ int pgoff, epoff;
+ int ret = -EIO;
+ u8 buf[6];
+ u8 redir;
+ u16 crc;
+
+ if (test_bit(pageno, data->page_present))
+ return 0; /* page already present */
+
+ epoff = pgoff = pageno * W1_PAGE_SIZE;
+ mutex_lock(&sl->master->bus_mutex);
+
+retry:
+ if (w1_reset_select_slave(sl))
+ goto err;
+
+ buf[0] = W1_EXT_READ_MEMORY;
+ buf[1] = pgoff & 0xff;
+ buf[2] = pgoff >> 8;
+ w1_write_block(sl->master, buf, 3);
+ w1_read_block(sl->master, buf + 3, 3); /* redir, crc16 */
+ redir = buf[3];
+ crc = crc16(CRC16_INIT, buf, 6);
+
+ if (crc != CRC16_VALID)
+ goto err;
+
+
+ if (redir != 0xff) {
+ redir_retries--;
+ if (redir_retries < 0)
+ goto err;
+
+ pgoff = (redir ^ 0xff) * W1_PAGE_SIZE;
+ goto retry;
+ }
+
+ w1_read_block(sl->master, &data->eprom[epoff], W1_PAGE_SIZE);
+ w1_read_block(sl->master, buf, 2); /* crc16 */
+ crc = crc16(CRC16_INIT, &data->eprom[epoff], W1_PAGE_SIZE);
+ crc = crc16(crc, buf, 2);
+
+ if (crc != CRC16_VALID)
+ goto err;
+
+ set_bit(pageno, data->page_present);
+ ret = 0;
+err:
+ mutex_unlock(&sl->master->bus_mutex);
+ return ret;
+}
+
+static int w1_nvmem_read(void *priv, unsigned int off, void *buf, size_t count)
+{
+ struct w1_slave *sl = priv;
+ struct w1_eprom_data *data = sl->family_data;
+ size_t eprom_size = data->size;
+ int ret;
+ int i;
+
+ if (off > eprom_size)
+ return -EINVAL;
+
+ if ((off + count) > eprom_size)
+ count = eprom_size - off;
+
+ i = OFF2PG(off);
+ do {
+ ret = data->read(sl, i++);
+ if (ret < 0)
+ return ret;
+ } while (i < OFF2PG(off + count));
+
+ memcpy(buf, &data->eprom[off], count);
+ return 0;
+}
+
+static int w1_eprom_add_slave(struct w1_slave *sl)
+{
+ struct w1_eprom_data *data;
+ struct nvmem_device *nvmem;
+ struct nvmem_config nvmem_cfg = {
+ .dev = &sl->dev,
+ .reg_read = w1_nvmem_read,
+ .type = NVMEM_TYPE_OTP,
+ .read_only = true,
+ .word_size = 1,
+ .priv = sl,
+ .id = -1
+ };
+
+ data = devm_kzalloc(&sl->dev, sizeof(struct w1_eprom_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ sl->family_data = data;
+ switch (sl->family->fid) {
+ case W1_DS2501_UNW_FAMILY:
+ data->size = W1_DS2501_SIZE;
+ data->read = w1_ds2502_read_page;
+ break;
+ case W1_DS2502_FAMILY:
+ case W1_DS2502_UNW_FAMILY:
+ data->size = W1_DS2502_SIZE;
+ data->read = w1_ds2502_read_page;
+ break;
+ case W1_DS2505_FAMILY:
+ data->size = W1_DS2505_SIZE;
+ data->read = w1_ds2505_read_page;
+ break;
+ }
+
+ if (sl->master->bus_master->dev_id)
+ snprintf(data->nvmem_name, sizeof(data->nvmem_name),
+ "%s-%02x-%012llx",
+ sl->master->bus_master->dev_id, sl->reg_num.family,
+ (unsigned long long)sl->reg_num.id);
+ else
+ snprintf(data->nvmem_name, sizeof(data->nvmem_name),
+ "%02x-%012llx",
+ sl->reg_num.family,
+ (unsigned long long)sl->reg_num.id);
+
+ nvmem_cfg.name = data->nvmem_name;
+ nvmem_cfg.size = data->size;
+
+ nvmem = devm_nvmem_register(&sl->dev, &nvmem_cfg);
+ return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct w1_family_ops w1_eprom_fops = {
+ .add_slave = w1_eprom_add_slave,
+};
+
+static struct w1_family w1_family_09 = {
+ .fid = W1_DS2502_FAMILY,
+ .fops = &w1_eprom_fops,
+};
+
+static struct w1_family w1_family_0b = {
+ .fid = W1_DS2505_FAMILY,
+ .fops = &w1_eprom_fops,
+};
+
+static struct w1_family w1_family_89 = {
+ .fid = W1_DS2502_UNW_FAMILY,
+ .fops = &w1_eprom_fops,
+};
+
+static struct w1_family w1_family_91 = {
+ .fid = W1_DS2501_UNW_FAMILY,
+ .fops = &w1_eprom_fops,
+};
+
+static int __init w1_ds250x_init(void)
+{
+ int err;
+
+ err = w1_register_family(&w1_family_09);
+ if (err)
+ return err;
+
+ err = w1_register_family(&w1_family_0b);
+ if (err)
+ goto err_0b;
+
+ err = w1_register_family(&w1_family_89);
+ if (err)
+ goto err_89;
+
+ err = w1_register_family(&w1_family_91);
+ if (err)
+ goto err_91;
+
+ return 0;
+
+err_91:
+ w1_unregister_family(&w1_family_89);
+err_89:
+ w1_unregister_family(&w1_family_0b);
+err_0b:
+ w1_unregister_family(&w1_family_09);
+ return err;
+}
+
+static void __exit w1_ds250x_exit(void)
+{
+ w1_unregister_family(&w1_family_09);
+ w1_unregister_family(&w1_family_0b);
+ w1_unregister_family(&w1_family_89);
+ w1_unregister_family(&w1_family_91);
+}
+
+module_init(w1_ds250x_init);
+module_exit(w1_ds250x_exit);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfe@suse.de>");
+MODULE_DESCRIPTION("w1 family driver for DS250x Add Only Memory");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("w1-family-" __stringify(W1_DS2502_FAMILY));
+MODULE_ALIAS("w1-family-" __stringify(W1_DS2505_FAMILY));
+MODULE_ALIAS("w1-family-" __stringify(W1_DS2501_UNW_FAMILY));
+MODULE_ALIAS("w1-family-" __stringify(W1_DS2502_UNW_FAMILY));
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-03 15:05:50 +0300