diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/tty/serial/Kconfig | 17 | ||||
-rw-r--r-- | drivers/tty/serial/Makefile | 1 | ||||
-rw-r--r-- | drivers/tty/serial/serial_ks8695.c | 698 |
3 files changed, 0 insertions, 716 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 3083dbae35f7..7041107ea78d 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -197,23 +197,6 @@ config SERIAL_KGDB_NMI If unsure, say N. -config SERIAL_KS8695 - bool "Micrel KS8695 (Centaur) serial port support" - depends on ARCH_KS8695 - select SERIAL_CORE - help - This selects the Micrel Centaur KS8695 UART. Say Y here. - -config SERIAL_KS8695_CONSOLE - bool "Support for console on KS8695 (Centaur) serial port" - depends on SERIAL_KS8695=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use a KS8695 (Centaur) UART as the - system console (the system console is the device which - receives all kernel messages and warnings and which allows - logins in single user mode). - config SERIAL_MESON tristate "Meson serial port support" depends on ARCH_MESON diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 15a0fccadf7e..7f744136489e 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -59,7 +59,6 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_MSM) += msm_serial.o obj-$(CONFIG_SERIAL_QCOM_GENI) += qcom_geni_serial.o -obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o obj-$(CONFIG_SERIAL_ST_ASC) += st-asc.o diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c deleted file mode 100644 index b461d791188c..000000000000 --- a/drivers/tty/serial/serial_ks8695.c +++ /dev/null @@ -1,698 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Driver for KS8695 serial ports - * - * Based on drivers/serial/serial_amba.c, by Kam Lee. - * - * Copyright 2002-2005 Micrel Inc. - */ -#include <linux/module.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/serial.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/device.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mach/irq.h> - -#include <mach/regs-uart.h> -#include <mach/regs-irq.h> - -#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include <linux/serial_core.h> - - -#define SERIAL_KS8695_MAJOR 204 -#define SERIAL_KS8695_MINOR 16 -#define SERIAL_KS8695_DEVNAME "ttyAM" - -#define SERIAL_KS8695_NR 1 - -/* - * Access macros for the KS8695 UART - */ -#define UART_GET_CHAR(p) (__raw_readl((p)->membase + KS8695_URRB) & 0xFF) -#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + KS8695_URTH) -#define UART_GET_FCR(p) __raw_readl((p)->membase + KS8695_URFC) -#define UART_PUT_FCR(p, c) __raw_writel((c), (p)->membase + KS8695_URFC) -#define UART_GET_MSR(p) __raw_readl((p)->membase + KS8695_URMS) -#define UART_GET_LSR(p) __raw_readl((p)->membase + KS8695_URLS) -#define UART_GET_LCR(p) __raw_readl((p)->membase + KS8695_URLC) -#define UART_PUT_LCR(p, c) __raw_writel((c), (p)->membase + KS8695_URLC) -#define UART_GET_MCR(p) __raw_readl((p)->membase + KS8695_URMC) -#define UART_PUT_MCR(p, c) __raw_writel((c), (p)->membase + KS8695_URMC) -#define UART_GET_BRDR(p) __raw_readl((p)->membase + KS8695_URBD) -#define UART_PUT_BRDR(p, c) __raw_writel((c), (p)->membase + KS8695_URBD) - -#define KS8695_CLR_TX_INT() __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST) - -#define UART_DUMMY_LSR_RX 0x100 -#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4) - -static inline int tx_enabled(struct uart_port *port) -{ - return port->unused[0] & 1; -} - -static inline int rx_enabled(struct uart_port *port) -{ - return port->unused[0] & 2; -} - -static inline int ms_enabled(struct uart_port *port) -{ - return port->unused[0] & 4; -} - -static inline void ms_enable(struct uart_port *port, int enabled) -{ - if(enabled) - port->unused[0] |= 4; - else - port->unused[0] &= ~4; -} - -static inline void rx_enable(struct uart_port *port, int enabled) -{ - if(enabled) - port->unused[0] |= 2; - else - port->unused[0] &= ~2; -} - -static inline void tx_enable(struct uart_port *port, int enabled) -{ - if(enabled) - port->unused[0] |= 1; - else - port->unused[0] &= ~1; -} - - -#ifdef SUPPORT_SYSRQ -static struct console ks8695_console; -#endif - -static void ks8695uart_stop_tx(struct uart_port *port) -{ - if (tx_enabled(port)) { - /* use disable_irq_nosync() and not disable_irq() to avoid self - * imposed deadlock by not waiting for irq handler to end, - * since this ks8695uart_stop_tx() is called from interrupt context. - */ - disable_irq_nosync(KS8695_IRQ_UART_TX); - tx_enable(port, 0); - } -} - -static void ks8695uart_start_tx(struct uart_port *port) -{ - if (!tx_enabled(port)) { - enable_irq(KS8695_IRQ_UART_TX); - tx_enable(port, 1); - } -} - -static void ks8695uart_stop_rx(struct uart_port *port) -{ - if (rx_enabled(port)) { - disable_irq(KS8695_IRQ_UART_RX); - rx_enable(port, 0); - } -} - -static void ks8695uart_enable_ms(struct uart_port *port) -{ - if (!ms_enabled(port)) { - enable_irq(KS8695_IRQ_UART_MODEM_STATUS); - ms_enable(port,1); - } -} - -static void ks8695uart_disable_ms(struct uart_port *port) -{ - if (ms_enabled(port)) { - disable_irq(KS8695_IRQ_UART_MODEM_STATUS); - ms_enable(port,0); - } -} - -static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned int status, ch, lsr, flg, max_count = 256; - - status = UART_GET_LSR(port); /* clears pending LSR interrupts */ - while ((status & URLS_URDR) && max_count--) { - ch = UART_GET_CHAR(port); - flg = TTY_NORMAL; - - port->icount.rx++; - - /* - * Note that the error handling code is - * out of the main execution path - */ - lsr = UART_GET_LSR(port) | UART_DUMMY_LSR_RX; - if (unlikely(lsr & (URLS_URBI | URLS_URPE | URLS_URFE | URLS_URROE))) { - if (lsr & URLS_URBI) { - lsr &= ~(URLS_URFE | URLS_URPE); - port->icount.brk++; - if (uart_handle_break(port)) - goto ignore_char; - } - if (lsr & URLS_URPE) - port->icount.parity++; - if (lsr & URLS_URFE) - port->icount.frame++; - if (lsr & URLS_URROE) - port->icount.overrun++; - - lsr &= port->read_status_mask; - - if (lsr & URLS_URBI) - flg = TTY_BREAK; - else if (lsr & URLS_URPE) - flg = TTY_PARITY; - else if (lsr & URLS_URFE) - flg = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; - - uart_insert_char(port, lsr, URLS_URROE, ch, flg); - -ignore_char: - status = UART_GET_LSR(port); - } - tty_flip_buffer_push(&port->state->port); - - return IRQ_HANDLED; -} - - -static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct circ_buf *xmit = &port->state->xmit; - unsigned int count; - - if (port->x_char) { - KS8695_CLR_TX_INT(); - UART_PUT_CHAR(port, port->x_char); - port->icount.tx++; - port->x_char = 0; - return IRQ_HANDLED; - } - - if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { - ks8695uart_stop_tx(port); - return IRQ_HANDLED; - } - - count = 16; /* fifo size */ - while (!uart_circ_empty(xmit) && (count-- > 0)) { - KS8695_CLR_TX_INT(); - UART_PUT_CHAR(port, xmit->buf[xmit->tail]); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - ks8695uart_stop_tx(port); - - return IRQ_HANDLED; -} - -static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned int status; - - /* - * clear modem interrupt by reading MSR - */ - status = UART_GET_MSR(port); - - if (status & URMS_URDDCD) - uart_handle_dcd_change(port, status & URMS_URDDCD); - - if (status & URMS_URDDST) - port->icount.dsr++; - - if (status & URMS_URDCTS) - uart_handle_cts_change(port, status & URMS_URDCTS); - - if (status & URMS_URTERI) - port->icount.rng++; - - wake_up_interruptible(&port->state->port.delta_msr_wait); - - return IRQ_HANDLED; -} - -static unsigned int ks8695uart_tx_empty(struct uart_port *port) -{ - return (UART_GET_LSR(port) & URLS_URTE) ? TIOCSER_TEMT : 0; -} - -static unsigned int ks8695uart_get_mctrl(struct uart_port *port) -{ - unsigned int result = 0; - unsigned int status; - - status = UART_GET_MSR(port); - if (status & URMS_URDCD) - result |= TIOCM_CAR; - if (status & URMS_URDSR) - result |= TIOCM_DSR; - if (status & URMS_URCTS) - result |= TIOCM_CTS; - if (status & URMS_URRI) - result |= TIOCM_RI; - - return result; -} - -static void ks8695uart_set_mctrl(struct uart_port *port, u_int mctrl) -{ - unsigned int mcr; - - mcr = UART_GET_MCR(port); - if (mctrl & TIOCM_RTS) - mcr |= URMC_URRTS; - else - mcr &= ~URMC_URRTS; - - if (mctrl & TIOCM_DTR) - mcr |= URMC_URDTR; - else - mcr &= ~URMC_URDTR; - - UART_PUT_MCR(port, mcr); -} - -static void ks8695uart_break_ctl(struct uart_port *port, int break_state) -{ - unsigned int lcr; - - lcr = UART_GET_LCR(port); - - if (break_state == -1) - lcr |= URLC_URSBC; - else - lcr &= ~URLC_URSBC; - - UART_PUT_LCR(port, lcr); -} - -static int ks8695uart_startup(struct uart_port *port) -{ - int retval; - - irq_modify_status(KS8695_IRQ_UART_TX, IRQ_NOREQUEST, IRQ_NOAUTOEN); - tx_enable(port, 0); - rx_enable(port, 1); - ms_enable(port, 1); - - /* - * Allocate the IRQ - */ - retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, 0, "UART TX", port); - if (retval) - goto err_tx; - - retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, 0, "UART RX", port); - if (retval) - goto err_rx; - - retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, 0, "UART LineStatus", port); - if (retval) - goto err_ls; - - retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, 0, "UART ModemStatus", port); - if (retval) - goto err_ms; - - return 0; - -err_ms: - free_irq(KS8695_IRQ_UART_LINE_STATUS, port); -err_ls: - free_irq(KS8695_IRQ_UART_RX, port); -err_rx: - free_irq(KS8695_IRQ_UART_TX, port); -err_tx: - return retval; -} - -static void ks8695uart_shutdown(struct uart_port *port) -{ - /* - * Free the interrupt - */ - free_irq(KS8695_IRQ_UART_RX, port); - free_irq(KS8695_IRQ_UART_TX, port); - free_irq(KS8695_IRQ_UART_MODEM_STATUS, port); - free_irq(KS8695_IRQ_UART_LINE_STATUS, port); - - /* disable break condition and fifos */ - UART_PUT_LCR(port, UART_GET_LCR(port) & ~URLC_URSBC); - UART_PUT_FCR(port, UART_GET_FCR(port) & ~URFC_URFE); -} - -static void ks8695uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) -{ - unsigned int lcr, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - switch (termios->c_cflag & CSIZE) { - case CS5: - lcr = URCL_5; - break; - case CS6: - lcr = URCL_6; - break; - case CS7: - lcr = URCL_7; - break; - default: - lcr = URCL_8; - break; - } - - /* stop bits */ - if (termios->c_cflag & CSTOPB) - lcr |= URLC_URSB; - - /* parity */ - if (termios->c_cflag & PARENB) { - if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */ - if (termios->c_cflag & PARODD) - lcr |= URPE_MARK; - else - lcr |= URPE_SPACE; - } - else if (termios->c_cflag & PARODD) - lcr |= URPE_ODD; - else - lcr |= URPE_EVEN; - } - - if (port->fifosize > 1) - fcr = URFC_URFRT_8 | URFC_URTFR | URFC_URRFR | URFC_URFE; - - spin_lock_irqsave(&port->lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - port->read_status_mask = URLS_URROE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= (URLS_URFE | URLS_URPE); - if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) - port->read_status_mask |= URLS_URBI; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= (URLS_URFE | URLS_URPE); - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= URLS_URBI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= URLS_URROE; - } - - /* - * Ignore all characters if CREAD is not set. - */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_LSR_RX; - - /* first, disable everything */ - if (UART_ENABLE_MS(port, termios->c_cflag)) - ks8695uart_enable_ms(port); - else - ks8695uart_disable_ms(port); - - /* Set baud rate */ - UART_PUT_BRDR(port, quot); - - UART_PUT_LCR(port, lcr); - UART_PUT_FCR(port, fcr); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *ks8695uart_type(struct uart_port *port) -{ - return port->type == PORT_KS8695 ? "KS8695" : NULL; -} - -/* - * Release the memory region(s) being used by 'port' - */ -static void ks8695uart_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, UART_PORT_SIZE); -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int ks8695uart_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, UART_PORT_SIZE, - "serial_ks8695") != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void ks8695uart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_KS8695; - ks8695uart_request_port(port); - } -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int ks8695uart_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_KS8695) - ret = -EINVAL; - if (ser->irq != port->irq) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops ks8695uart_pops = { - .tx_empty = ks8695uart_tx_empty, - .set_mctrl = ks8695uart_set_mctrl, - .get_mctrl = ks8695uart_get_mctrl, - .stop_tx = ks8695uart_stop_tx, - .start_tx = ks8695uart_start_tx, - .stop_rx = ks8695uart_stop_rx, - .enable_ms = ks8695uart_enable_ms, - .break_ctl = ks8695uart_break_ctl, - .startup = ks8695uart_startup, - .shutdown = ks8695uart_shutdown, - .set_termios = ks8695uart_set_termios, - .type = ks8695uart_type, - .release_port = ks8695uart_release_port, - .request_port = ks8695uart_request_port, - .config_port = ks8695uart_config_port, - .verify_port = ks8695uart_verify_port, -}; - -static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = { - { - .membase = KS8695_UART_VA, - .mapbase = KS8695_UART_PA, - .iotype = SERIAL_IO_MEM, - .irq = KS8695_IRQ_UART_TX, - .uartclk = KS8695_CLOCK_RATE * 16, - .fifosize = 16, - .ops = &ks8695uart_pops, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - } -}; - -#ifdef CONFIG_SERIAL_KS8695_CONSOLE -static void ks8695_console_putchar(struct uart_port *port, int ch) -{ - while (!(UART_GET_LSR(port) & URLS_URTHRE)) - barrier(); - - UART_PUT_CHAR(port, ch); -} - -static void ks8695_console_write(struct console *co, const char *s, u_int count) -{ - struct uart_port *port = ks8695uart_ports + co->index; - - uart_console_write(port, s, count, ks8695_console_putchar); -} - -static void __init ks8695_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) -{ - unsigned int lcr; - - lcr = UART_GET_LCR(port); - - switch (lcr & URLC_PARITY) { - case URPE_ODD: - *parity = 'o'; - break; - case URPE_EVEN: - *parity = 'e'; - break; - default: - *parity = 'n'; - } - - switch (lcr & URLC_URCL) { - case URCL_5: - *bits = 5; - break; - case URCL_6: - *bits = 6; - break; - case URCL_7: - *bits = 7; - break; - default: - *bits = 8; - } - - *baud = port->uartclk / (UART_GET_BRDR(port) & 0x0FFF); - *baud /= 16; - *baud &= 0xFFFFFFF0; -} - -static int __init ks8695_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - port = uart_get_console(ks8695uart_ports, SERIAL_KS8695_NR, co); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - ks8695_console_get_options(port, &baud, &parity, &bits); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver ks8695_reg; - -static struct console ks8695_console = { - .name = SERIAL_KS8695_DEVNAME, - .write = ks8695_console_write, - .device = uart_console_device, - .setup = ks8695_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &ks8695_reg, -}; - -static int __init ks8695_console_init(void) -{ - add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL); - register_console(&ks8695_console); - return 0; -} - -console_initcall(ks8695_console_init); - -#define KS8695_CONSOLE &ks8695_console -#else -#define KS8695_CONSOLE NULL -#endif - -static struct uart_driver ks8695_reg = { - .owner = THIS_MODULE, - .driver_name = "serial_ks8695", - .dev_name = SERIAL_KS8695_DEVNAME, - .major = SERIAL_KS8695_MAJOR, - .minor = SERIAL_KS8695_MINOR, - .nr = SERIAL_KS8695_NR, - .cons = KS8695_CONSOLE, -}; - -static int __init ks8695uart_init(void) -{ - int i, ret; - - printk(KERN_INFO "Serial: Micrel KS8695 UART driver\n"); - - ret = uart_register_driver(&ks8695_reg); - if (ret) - return ret; - - for (i = 0; i < SERIAL_KS8695_NR; i++) - uart_add_one_port(&ks8695_reg, &ks8695uart_ports[0]); - - return 0; -} - -static void __exit ks8695uart_exit(void) -{ - int i; - - for (i = 0; i < SERIAL_KS8695_NR; i++) - uart_remove_one_port(&ks8695_reg, &ks8695uart_ports[0]); - uart_unregister_driver(&ks8695_reg); -} - -module_init(ks8695uart_init); -module_exit(ks8695uart_exit); - -MODULE_DESCRIPTION("KS8695 serial port driver"); -MODULE_AUTHOR("Micrel Inc."); -MODULE_LICENSE("GPL"); |