summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/msi.h10
-rw-r--r--include/linux/pci.h55
-rw-r--r--include/linux/pci_hotplug.h5
-rw-r--r--include/linux/pcieport_if.h2
-rw-r--r--include/uapi/linux/pci_regs.h72
5 files changed, 71 insertions, 73 deletions
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 87cce50bd121..009b02481436 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -26,11 +26,11 @@ struct msi_desc {
struct {
__u8 is_msix : 1;
__u8 multiple: 3; /* log2 number of messages */
- __u8 maskbit : 1; /* mask-pending bit supported ? */
- __u8 is_64 : 1; /* Address size: 0=32bit 1=64bit */
- __u8 pos; /* Location of the msi capability */
- __u16 entry_nr; /* specific enabled entry */
- unsigned default_irq; /* default pre-assigned irq */
+ __u8 maskbit : 1; /* mask-pending bit supported ? */
+ __u8 is_64 : 1; /* Address size: 0=32bit 1=64bit */
+ __u8 pos; /* Location of the msi capability */
+ __u16 entry_nr; /* specific enabled entry */
+ unsigned default_irq; /* default pre-assigned irq */
} msi_attrib;
u32 masked; /* mask bits */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 835ec7bf6c05..1084a15175e0 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -32,7 +32,6 @@
#include <linux/irqreturn.h>
#include <uapi/linux/pci.h>
-/* Include the ID list */
#include <linux/pci_ids.h>
/*
@@ -42,9 +41,10 @@
*
* 7:3 = slot
* 2:0 = function
- * PCI_DEVFN(), PCI_SLOT(), and PCI_FUNC() are defined uapi/linux/pci.h
+ *
+ * PCI_DEVFN(), PCI_SLOT(), and PCI_FUNC() are defined in uapi/linux/pci.h.
* In the interest of not exposing interfaces to user-space unnecessarily,
- * the following kernel only defines are being added here.
+ * the following kernel-only defines are being added here.
*/
#define PCI_DEVID(bus, devfn) ((((u16)bus) << 8) | devfn)
/* return bus from PCI devid = ((u16)bus_number) << 8) | devfn */
@@ -153,10 +153,10 @@ enum pcie_reset_state {
/* Reset is NOT asserted (Use to deassert reset) */
pcie_deassert_reset = (__force pcie_reset_state_t) 1,
- /* Use #PERST to reset PCI-E device */
+ /* Use #PERST to reset PCIe device */
pcie_warm_reset = (__force pcie_reset_state_t) 2,
- /* Use PCI-E Hot Reset to reset device */
+ /* Use PCIe Hot Reset to reset device */
pcie_hot_reset = (__force pcie_reset_state_t) 3
};
@@ -259,13 +259,13 @@ struct pci_dev {
unsigned int class; /* 3 bytes: (base,sub,prog-if) */
u8 revision; /* PCI revision, low byte of class word */
u8 hdr_type; /* PCI header type (`multi' flag masked out) */
- u8 pcie_cap; /* PCI-E capability offset */
+ u8 pcie_cap; /* PCIe capability offset */
u8 msi_cap; /* MSI capability offset */
u8 msix_cap; /* MSI-X capability offset */
- u8 pcie_mpss:3; /* PCI-E Max Payload Size Supported */
+ u8 pcie_mpss:3; /* PCIe Max Payload Size Supported */
u8 rom_base_reg; /* which config register controls the ROM */
- u8 pin; /* which interrupt pin this device uses */
- u16 pcie_flags_reg; /* cached PCI-E Capabilities Register */
+ u8 pin; /* which interrupt pin this device uses */
+ u16 pcie_flags_reg; /* cached PCIe Capabilities Register */
struct pci_driver *driver; /* which driver has allocated this device */
u64 dma_mask; /* Mask of the bits of bus address this
@@ -300,7 +300,7 @@ struct pci_dev {
unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
#ifdef CONFIG_PCIEASPM
- struct pcie_link_state *link_state; /* ASPM link state. */
+ struct pcie_link_state *link_state; /* ASPM link state */
#endif
pci_channel_state_t error_state; /* current connectivity state */
@@ -317,7 +317,7 @@ struct pci_dev {
bool match_driver; /* Skip attaching driver */
/* These fields are used by common fixups */
- unsigned int transparent:1; /* Transparent PCI bridge */
+ unsigned int transparent:1; /* Subtractive decode PCI bridge */
unsigned int multifunction:1;/* Part of multi-function device */
/* keep track of device state */
unsigned int is_added:1;
@@ -326,7 +326,7 @@ struct pci_dev {
unsigned int block_cfg_access:1; /* config space access is blocked */
unsigned int broken_parity_status:1; /* Device generates false positive parity */
unsigned int irq_reroute_variant:2; /* device needs IRQ rerouting variant */
- unsigned int msi_enabled:1;
+ unsigned int msi_enabled:1;
unsigned int msix_enabled:1;
unsigned int ari_enabled:1; /* ARI forwarding */
unsigned int is_managed:1;
@@ -371,7 +371,6 @@ static inline struct pci_dev *pci_physfn(struct pci_dev *dev)
if (dev->is_virtfn)
dev = dev->physfn;
#endif
-
return dev;
}
@@ -456,7 +455,7 @@ struct pci_bus {
char name[48];
unsigned short bridge_ctl; /* manage NO_ISA/FBB/et al behaviors */
- pci_bus_flags_t bus_flags; /* Inherited by child busses */
+ pci_bus_flags_t bus_flags; /* inherited by child buses */
struct device *bridge;
struct device dev;
struct bin_attribute *legacy_io; /* legacy I/O for this bus */
@@ -468,7 +467,7 @@ struct pci_bus {
#define to_pci_bus(n) container_of(n, struct pci_bus, dev)
/*
- * Returns true if the pci bus is root (behind host-pci bridge),
+ * Returns true if the PCI bus is root (behind host-PCI bridge),
* false otherwise
*
* Some code assumes that "bus->self == NULL" means that bus is a root bus.
@@ -510,7 +509,7 @@ static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev) { return false;
#define PCIBIOS_BUFFER_TOO_SMALL 0x89
/*
- * Translate above to generic errno for passing back through non-pci.
+ * Translate above to generic errno for passing back through non-PCI code.
*/
static inline int pcibios_err_to_errno(int err)
{
@@ -561,11 +560,12 @@ struct pci_dynids {
struct list_head list; /* for IDs added at runtime */
};
-/* ---------------------------------------------------------------- */
-/** PCI Error Recovery System (PCI-ERS). If a PCI device driver provides
- * a set of callbacks in struct pci_error_handlers, then that device driver
- * will be notified of PCI bus errors, and will be driven to recovery
- * when an error occurs.
+
+/*
+ * PCI Error Recovery System (PCI-ERS). If a PCI device driver provides
+ * a set of callbacks in struct pci_error_handlers, that device driver
+ * will be notified of PCI bus errors, and will be driven to recovery
+ * when an error occurs.
*/
typedef unsigned int __bitwise pci_ers_result_t;
@@ -609,7 +609,6 @@ struct pci_error_handlers {
void (*resume)(struct pci_dev *dev);
};
-/* ---------------------------------------------------------------- */
struct module;
struct pci_driver {
@@ -713,10 +712,10 @@ extern enum pcie_bus_config_types pcie_bus_config;
extern struct bus_type pci_bus_type;
-/* Do NOT directly access these two variables, unless you are arch specific pci
- * code, or pci core code. */
+/* Do NOT directly access these two variables, unless you are arch-specific PCI
+ * code, or PCI core code. */
extern struct list_head pci_root_buses; /* list of all known PCI buses */
-/* Some device drivers need know if pci is initiated */
+/* Some device drivers need know if PCI is initiated */
int no_pci_devices(void);
void pcibios_resource_survey_bus(struct pci_bus *bus);
@@ -724,7 +723,7 @@ void pcibios_add_bus(struct pci_bus *bus);
void pcibios_remove_bus(struct pci_bus *bus);
void pcibios_fixup_bus(struct pci_bus *);
int __must_check pcibios_enable_device(struct pci_dev *, int mask);
-/* Architecture specific versions may override this (weak) */
+/* Architecture-specific versions may override this (weak) */
char *pcibios_setup(char *str);
/* Used only when drivers/pci/setup.c is used */
@@ -1258,7 +1257,7 @@ void pci_cfg_access_unlock(struct pci_dev *dev);
/*
* PCI domain support. Sometimes called PCI segment (eg by ACPI),
- * a PCI domain is defined to be a set of PCI busses which share
+ * a PCI domain is defined to be a set of PCI buses which share
* configuration space.
*/
#ifdef CONFIG_PCI_DOMAINS
@@ -1672,7 +1671,7 @@ extern u8 pci_cache_line_size;
extern unsigned long pci_hotplug_io_size;
extern unsigned long pci_hotplug_mem_size;
-/* Architecture specific versions may override these (weak) */
+/* Architecture-specific versions may override these (weak) */
int pcibios_add_platform_entries(struct pci_dev *dev);
void pcibios_disable_device(struct pci_dev *dev);
void pcibios_set_master(struct pci_dev *dev);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 430dd963707b..a2e2f1d17e16 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -39,8 +39,8 @@
* @hardware_test: Called to run a specified hardware test on the specified
* slot.
* @get_power_status: Called to get the current power status of a slot.
- * If this field is NULL, the value passed in the struct hotplug_slot_info
- * will be used when this value is requested by a user.
+ * If this field is NULL, the value passed in the struct hotplug_slot_info
+ * will be used when this value is requested by a user.
* @get_attention_status: Called to get the current attention status of a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
@@ -191,4 +191,3 @@ static inline int pci_get_hp_params(struct pci_dev *dev,
void pci_configure_slot(struct pci_dev *dev);
#endif
-
diff --git a/include/linux/pcieport_if.h b/include/linux/pcieport_if.h
index 9572669eea97..4f1089f2cc98 100644
--- a/include/linux/pcieport_if.h
+++ b/include/linux/pcieport_if.h
@@ -23,7 +23,7 @@
#define PCIE_PORT_SERVICE_VC (1 << PCIE_PORT_SERVICE_VC_SHIFT)
struct pcie_device {
- int irq; /* Service IRQ/MSI/MSI-X Vector */
+ int irq; /* Service IRQ/MSI/MSI-X Vector */
struct pci_dev *port; /* Root/Upstream/Downstream Port */
u32 service; /* Port service this device represents */
void *priv_data; /* Service Private Data */
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 0890556f779e..4a98e85438a7 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -13,10 +13,10 @@
* PCI to PCI Bridge Specification
* PCI System Design Guide
*
- * For hypertransport information, please consult the following manuals
- * from http://www.hypertransport.org
+ * For HyperTransport information, please consult the following manuals
+ * from http://www.hypertransport.org
*
- * The Hypertransport I/O Link Specification
+ * The HyperTransport I/O Link Specification
*/
#ifndef LINUX_PCI_REGS_H
@@ -37,7 +37,7 @@
#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
-#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
+#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
@@ -45,7 +45,7 @@
#define PCI_STATUS 0x06 /* 16 bits */
#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */
#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
-#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
+#define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz PCI 2.1 bus */
#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
@@ -205,14 +205,14 @@
#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
#define PCI_CAP_ID_HT 0x08 /* HyperTransport */
-#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */
+#define PCI_CAP_ID_VNDR 0x09 /* Vendor-Specific */
#define PCI_CAP_ID_DBG 0x0A /* Debug port */
#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */
-#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
+#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */
#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */
#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */
-#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
+#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */
#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */
@@ -268,8 +268,8 @@
#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
-#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
-#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
+#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
+#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */
#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */
@@ -321,7 +321,7 @@
#define PCI_MSIX_PBA_OFFSET 0xfffffff8 /* Offset into specified BAR */
#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */
-/* MSI-X entry's format */
+/* MSI-X Table entry format */
#define PCI_MSIX_ENTRY_SIZE 16
#define PCI_MSIX_ENTRY_LOWER_ADDR 0
#define PCI_MSIX_ENTRY_UPPER_ADDR 4
@@ -372,7 +372,7 @@
#define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */
#define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */
#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */
-#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
+#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
#define PCI_X_STATUS 4 /* PCI-X capabilities */
#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */
#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */
@@ -407,8 +407,8 @@
/* PCI Bridge Subsystem ID registers */
-#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */
-#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */
+#define PCI_SSVID_VENDOR_ID 4 /* PCI Bridge subsystem vendor ID */
+#define PCI_SSVID_DEVICE_ID 6 /* PCI Bridge subsystem device ID */
/* PCI Express capability registers */
@@ -484,12 +484,12 @@
#define PCI_EXP_LNKCTL_CLKREQ_EN 0x0100 /* Enable clkreq */
#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */
#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */
-#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */
+#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Link Autonomous Bandwidth Interrupt Enable */
#define PCI_EXP_LNKSTA 18 /* Link Status */
#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */
#define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */
#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */
-#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */
+#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */
#define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */
#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */
#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */
@@ -593,7 +593,7 @@
#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */
#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */
#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */
-#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor Specific */
+#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor-Specific */
#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */
#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */
#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */
@@ -602,12 +602,12 @@
#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */
#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */
#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */
-#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* reserved for AMD */
-#define PCI_EXT_CAP_ID_REBAR 0x15 /* resizable BAR */
-#define PCI_EXT_CAP_ID_DPA 0x16 /* dynamic power alloc */
-#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH request */
-#define PCI_EXT_CAP_ID_LTR 0x18 /* latency tolerance reporting */
-#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe */
+#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* Reserved for AMD */
+#define PCI_EXT_CAP_ID_REBAR 0x15 /* Resizable BAR */
+#define PCI_EXT_CAP_ID_DPA 0x16 /* Dynamic Power Allocation */
+#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH Requester */
+#define PCI_EXT_CAP_ID_LTR 0x18 /* Latency Tolerance Reporting */
+#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe Capability */
#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */
#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */
#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID
@@ -667,9 +667,9 @@
#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */
/* Multi ERR_COR Received */
#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002
-/* ERR_FATAL/NONFATAL Recevied */
+/* ERR_FATAL/NONFATAL Received */
#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004
-/* Multi ERR_FATAL/NONFATAL Recevied */
+/* Multi ERR_FATAL/NONFATAL Received */
#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008
#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */
#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */
@@ -678,7 +678,7 @@
/* Virtual Channel */
#define PCI_VC_PORT_REG1 4
-#define PCI_VC_REG1_EVCC 0x7 /* extended vc count */
+#define PCI_VC_REG1_EVCC 0x7 /* extended VC count */
#define PCI_VC_PORT_REG2 8
#define PCI_VC_REG2_32_PHASE 0x2
#define PCI_VC_REG2_64_PHASE 0x4
@@ -711,7 +711,7 @@
#define PCI_VNDR_HEADER_LEN(x) (((x) >> 20) & 0xfff)
/*
- * Hypertransport sub capability types
+ * HyperTransport sub capability types
*
* Unfortunately there are both 3 bit and 5 bit capability types defined
* in the HT spec, catering for that is a little messy. You probably don't
@@ -739,8 +739,8 @@
#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */
#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */
#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */
-#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */
-#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */
+#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 HyperTransport configuration */
+#define HT_CAPTYPE_PM 0xE0 /* HyperTransport power management configuration */
#define HT_CAP_SIZEOF_LONG 28 /* slave & primary */
#define HT_CAP_SIZEOF_SHORT 24 /* host & secondary */
@@ -777,14 +777,14 @@
#define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */
#define PCI_EXT_CAP_PRI_SIZEOF 16
-/* PASID capability */
+/* Process Address Space ID */
#define PCI_PASID_CAP 0x04 /* PASID feature register */
#define PCI_PASID_CAP_EXEC 0x02 /* Exec permissions Supported */
-#define PCI_PASID_CAP_PRIV 0x04 /* Priviledge Mode Supported */
+#define PCI_PASID_CAP_PRIV 0x04 /* Privilege Mode Supported */
#define PCI_PASID_CTRL 0x06 /* PASID control register */
#define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */
#define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */
-#define PCI_PASID_CTRL_PRIV 0x04 /* Priviledge Mode Enable */
+#define PCI_PASID_CTRL_PRIV 0x04 /* Privilege Mode Enable */
#define PCI_EXT_CAP_PASID_SIZEOF 8
/* Single Root I/O Virtualization */
@@ -839,22 +839,22 @@
#define PCI_ACS_CTRL 0x06 /* ACS Control Register */
#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */
-#define PCI_VSEC_HDR 4 /* extended cap - vendor specific */
+#define PCI_VSEC_HDR 4 /* extended cap - vendor-specific */
#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */
-/* sata capability */
+/* SATA capability */
#define PCI_SATA_REGS 4 /* SATA REGs specifier */
#define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */
#define PCI_SATA_REGS_INLINE 0xF /* REGS in config space */
#define PCI_SATA_SIZEOF_SHORT 8
#define PCI_SATA_SIZEOF_LONG 16
-/* resizable BARs */
+/* Resizable BARs */
#define PCI_REBAR_CTRL 8 /* control register */
#define PCI_REBAR_CTRL_NBAR_MASK (7 << 5) /* mask for # bars */
#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # bars */
-/* dynamic power allocation */
+/* Dynamic Power Allocation */
#define PCI_DPA_CAP 4 /* capability register */
#define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */
#define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */