summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-12-01lan743x: fix deadlock in lan743x_phy_link_status_change()Heiner Kallweit1-9/+3
[ Upstream commit ddb826c2c92d461f290a7bab89e7c28696191875 ] Usage of phy_ethtool_get_link_ksettings() in the link status change handler isn't needed, and in combination with the referenced change it results in a deadlock. Simply remove the call and replace it with direct access to phydev->speed. The duplex argument of lan743x_phy_update_flowcontrol() isn't used and can be removed. Fixes: c10a485c3de5 ("phy: phy_ethtool_ksettings_get: Lock the phy for consistency") Reported-by: Alessandro B Maurici <abmaurici@gmail.com> Tested-by: Alessandro B Maurici <abmaurici@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/40e27f76-0ba3-dcef-ee32-a78b9df38b0f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flowsEric Dumazet1-2/+3
[ Upstream commit 4e1fddc98d2585ddd4792b5e44433dcee7ece001 ] While testing BIG TCP patch series, I was expecting that TCP_RR workloads with 80KB requests/answers would send one 80KB TSO packet, then being received as a single GRO packet. It turns out this was not happening, and the root cause was that cubic Hystart ACK train was triggering after a few (2 or 3) rounds of RPC. Hystart was wrongly setting CWND/SSTHRESH to 30, while my RPC needed a budget of ~20 segments. Ideally these TCP_RR flows should not exit slow start. Cubic Hystart should reset itself at each round, instead of assuming every TCP flow is a bulk one. Note that even after this patch, Hystart can still trigger, depending on scheduling artifacts, but at a higher CWND/SSTHRESH threshold, keeping optimal TSO packet sizes. Tested: ip link set dev eth0 gro_ipv6_max_size 131072 gso_ipv6_max_size 131072 nstat -n; netperf -H ... -t TCP_RR -l 5 -- -r 80000,80000 -K cubic; nstat|egrep "Ip6InReceives|Hystart|Ip6OutRequests" Before: 8605 Ip6InReceives 87541 0.0 Ip6OutRequests 129496 0.0 TcpExtTCPHystartTrainDetect 1 0.0 TcpExtTCPHystartTrainCwnd 30 0.0 After: 8760 Ip6InReceives 88514 0.0 Ip6OutRequests 87975 0.0 Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3") Co-developed-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Link: https://lore.kernel.org/r/20211123202535.1843771-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01drm/amd/display: Set plane update flags for all planes in resetNicholas Kazlauskas1-2/+2
[ Upstream commit 21431f70f6014f81b0d118ff4fcee12b00b9dd70 ] [Why] We're only setting the flags on stream[0]'s planes so this logic fails if we have more than one stream in the state. This can cause a page flip timeout with multiple displays in the configuration. [How] Index into the stream_status array using the stream index - it's a 1:1 mapping. Fixes: cdaae8371aa9 ("drm/amd/display: Handle GPU reset for DC block") Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01drm/amd/display: Fix DPIA outbox timeout after GPU resetNicholas Kazlauskas1-0/+2
[ Upstream commit 6eff272dbee7ad444c491c9a96d49e78e91e2161 ] [Why] The HW interrupt gets disabled after GPU reset so we don't receive notifications for HPD or AUX from DMUB - leading to timeout and black screen with (or without) DPIA links connected. [How] Re-enable the interrupt after GPU reset like we do for the other DC interrupts. Fixes: 81927e2808be ("drm/amd/display: Support for DMUB AUX") Reviewed-by: Jude Shih <Jude.Shih@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01PM: hibernate: use correct mode for swsusp_close()Thomas Zeitlhofer1-3/+3
[ Upstream commit cefcf24b4d351daf70ecd945324e200d3736821e ] Commit 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()") changed the opening mode of the block device to (FMODE_READ | FMODE_EXCL). In the corresponding calls to swsusp_close(), the mode is still just FMODE_READ which triggers the warning in blkdev_flush_mapping() on resume from hibernate. So, use the mode (FMODE_READ | FMODE_EXCL) also when closing the device. Fixes: 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()") Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net/ncsi : Add payload to be 32-bit aligned to fix dropped packetsKumar Thangavel1-8/+16
[ Upstream commit ac132852147ad303a938dda318970dd1bbdfda4e ] Update NC-SI command handler (both standard and OEM) to take into account of payload paddings in allocating skb (in case of payload size is not 32-bit aligned). The checksum field follows payload field, without taking payload padding into account can cause checksum being truncated, leading to dropped packets. Fixes: fb4ee67529ff ("net/ncsi: Add NCSI OEM command support") Signed-off-by: Kumar Thangavel <thangavel.k@hcl.com> Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01arm64: uaccess: avoid blocking within critical sectionsMark Rutland1-7/+41
[ Upstream commit 94902d849e85093aafcdbea2be8e2beff47233e6 ] As Vincent reports in: https://lore.kernel.org/r/20211118163417.21617-1-vincent.whitchurch@axis.com The put_user() in schedule_tail() can get stuck in a livelock, similar to a problem recently fixed on riscv in commit: 285a76bb2cf51b0c ("riscv: evaluate put_user() arg before enabling user access") In __raw_put_user() we have a critical section between uaccess_ttbr0_enable() and uaccess_ttbr0_disable() where we cannot safely call into the scheduler without having taken an exception, as schedule() and other scheduling functions will not save/restore the TTBR0 state. If either of the `x` or `ptr` arguments to __raw_put_user() contain a blocking call, we may call into the scheduler within the critical section. This can result in two problems: 1) The access within the critical section will occur without the required TTBR0 tables installed. This will fault, and where the required tables permit access, the access will be retried without the required tables, resulting in a livelock. 2) When TTBR0 SW PAN is in use, check_and_switch_context() does not modify TTBR0, leaving a stale value installed. The mappings of the blocked task will erroneously be accessible to regular accesses in the context of the new task. Additionally, if the tables are subsequently freed, local TLB maintenance required to reuse the ASID may be lost, potentially resulting in TLB corruption (e.g. in the presence of CnP). The same issue exists for __raw_get_user() in the critical section between uaccess_ttbr0_enable() and uaccess_ttbr0_disable(). A similar issue exists for __get_kernel_nofault() and __put_kernel_nofault() for the critical section between __uaccess_enable_tco_async() and __uaccess_disable_tco_async(), as the TCO state is not context-switched by direct calls into the scheduler. Here the TCO state may be lost from the context of the current task, resulting in unexpected asynchronous tag check faults. It may also be leaked to another task, suppressing expected tag check faults. To fix all of these cases, we must ensure that we do not directly call into the scheduler in their respective critical sections. This patch reworks __raw_put_user(), __raw_get_user(), __get_kernel_nofault(), and __put_kernel_nofault(), ensuring that parameters are evaluated outside of the critical sections. To make this requirement clear, comments are added describing the problem, and line spaces added to separate the critical sections from other portions of the macros. For __raw_get_user() and __raw_put_user() the `err` parameter is conditionally assigned to, and we must currently evaluate this in the critical section. This behaviour is relied upon by the signal code, which uses chains of put_user_error() and get_user_error(), checking the return value at the end. In all cases, the `err` parameter is a plain int rather than a more complex expression with a blocking call, so this is safe. In future we should try to clean up the `err` usage to remove the potential for this to be a problem. Aside from the changes to time of evaluation, there should be no functional change as a result of this patch. Reported-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20211118163417.21617-1-vincent.whitchurch@axis.com Fixes: f253d827f33c ("arm64: uaccess: refactor __{get,put}_user") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20211122125820.55286-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01drm/hyperv: Fix device removal on Gen1 VMsMohammed Gamal1-1/+18
[ Upstream commit e048834c209a02e3776bcc47d43c6d863e3a67ca ] The Hyper-V DRM driver tries to free MMIO region on removing the device regardless of VM type, while Gen1 VMs don't use MMIO and hence causing the kernel to crash on a NULL pointer dereference. Fix this by making deallocating MMIO only on Gen2 machines and implement removal for Gen1 Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device") Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Reviewed-by: Deepak Rawat <drawat.floss@gmail.com> Signed-off-by: Deepak Rawat <drawat.floss@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211119112900.300537-1-mgamal@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01nvmet-tcp: fix incomplete data digest sendVarun Prakash1-1/+6
[ Upstream commit 102110efdff6beedece6ab9b51664c32ac01e2db ] Current nvmet_try_send_ddgst() code does not check whether all data digest bytes are transmitted, fix this by returning -EAGAIN if all data digest bytes are not transmitted. Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01cpufreq: intel_pstate: Add Ice Lake server to out-of-band IDsAdamos Ttofari1-0/+1
[ Upstream commit cd23f02f166892603eb9f2d488152b975872b682 ] Commit fbdc21e9b038 ("cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode") enabled the use of Intel P-State driver for Ice Lake servers. But it doesn't cover the case when OS can't control P-States. Therefore, for Ice Lake server, if MSR_MISC_PWR_MGMT bits 8 or 18 are enabled, then the Intel P-State driver should exit as OS can't control P-States. Fixes: fbdc21e9b038 ("cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode") Signed-off-by: Adamos Ttofari <attofari@amazon.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: marvell: mvpp2: increase MTU limit when XDP enabledMarek Behún1-6/+8
[ Upstream commit 7b1b62bc1e6a7b2fd5ee7a4296268eb291d23aeb ] Currently mvpp2_xdp_setup won't allow attaching XDP program if mtu > ETH_DATA_LEN (1500). The mvpp2_change_mtu on the other hand checks whether MVPP2_RX_PKT_SIZE(mtu) > MVPP2_BM_LONG_PKT_SIZE. These two checks are semantically different. Moreover this limit can be increased to MVPP2_MAX_RX_BUF_SIZE, since in mvpp2_rx we have xdp.data = data + MVPP2_MH_SIZE + MVPP2_SKB_HEADROOM; xdp.frame_sz = PAGE_SIZE; Change the checks to check whether mtu > MVPP2_MAX_RX_BUF_SIZE Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: ipa: kill ipa_cmd_pipeline_clear()Alex Elder3-24/+0
[ Upstream commit e4e9bfb7c93d7e78aa4ad7e1c411a8df15386062 ] Calling ipa_cmd_pipeline_clear() after stopping the channel underlying the AP<-modem RX endpoint can lead to a deadlock. This occurs in the ->runtime_suspend device power operation for the IPA driver. While this callback is in progress, any other requests for power will block until the callback returns. Stopping the AP<-modem RX channel does not prevent the modem from sending another packet to this endpoint. If a packet arrives for an RX channel when the channel is stopped, an SUSPEND IPA interrupt condition will be pending. Handling an IPA interrupt requires power, so ipa_isr_thread() calls pm_runtime_get_sync() first thing. The problem occurs because a "pipeline clear" command will not complete while such a SUSPEND interrupt condition exists. So the SUSPEND IPA interrupt handler won't proceed until it gets power; that won't happen until the ->runtime_suspend callback (and its "pipeline clear" command) completes; and that can't happen while the SUSPEND interrupt condition exists. It turns out that in this case there is no need to use the "pipeline clear" command. There are scenarios in which clearing the pipeline is required while suspending, but those are not (yet) supported upstream. So a simple fix, avoiding the potential deadlock, is to stop calling ipa_cmd_pipeline_clear() in ipa_endpoint_suspend(). This removes the only user of ipa_cmd_pipeline_clear(), so get rid of that function. It can be restored again whenever it's needed. This is basically a manual revert along with an explanation for commit 6cb63ea6a39ea ("net: ipa: introduce ipa_cmd_tag_process()"). Fixes: 6cb63ea6a39ea ("net: ipa: introduce ipa_cmd_tag_process()") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: ipa: separate disabling setup from modem stopAlex Elder4-8/+13
[ Upstream commit 8afc7e471ad3c92a9c96adc62d1b67de77378bb6 ] The IPA setup_complete flag is set at the end of ipa_setup(), when the setup phase of initialization has completed successfully. This occurs as part of driver probe processing, or (if "modem-init" is specified in the DTS file) it is triggered by the "ipa-setup-ready" SMP2P interrupt generated by the modem. In the latter case, it's possible for driver shutdown (or remove) to begin while setup processing is underway, and this can't be allowed. The problem is that the setup_complete flag is not adequate to signal that setup is underway. If setup_complete is set, it will never be un-set, so that case is not a problem. But if setup_complete is false, there's a chance setup is underway. Because setup is triggered by an interrupt on a "modem-init" system, there is a simple way to ensure the value of setup_complete is safe to read. The threaded handler--if it is executing--will complete as part of a request to disable the "ipa-modem-ready" interrupt. This means that ipa_setup() (which is called from the handler) will run to completion if it was underway, or will never be called otherwise. The request to disable the "ipa-setup-ready" interrupt is currently made within ipa_modem_stop(). Instead, disable the interrupt outside that function in the two places it's called. In the case of ipa_remove(), this ensures the setup_complete flag is safe to read before we read it. Rename ipa_smp2p_disable() to be ipa_smp2p_irq_disable_setup(), to be more specific about its effect. Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: ipa: directly disable ipa-setup-ready interruptAlex Elder1-10/+9
[ Upstream commit 33a153100bb3459479bd95d3259c2915b53fefa8 ] We currently maintain a "disabled" Boolean flag to determine whether the "ipa-setup-ready" SMP2P IRQ handler does anything. That flag must be accessed under protection of a mutex. Instead, disable the SMP2P interrupt when requested, which prevents the interrupt handler from ever being called. More importantly, it synchronizes a thread disabling the interrupt with the completion of the interrupt handler in case they run concurrently. Use the IPA setup_complete flag rather than the disabled flag in the handler to determine whether to ignore any interrupts arriving after the first. Rename the "disabled" flag to be "setup_disabled", to be specific about its purpose. Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01mlxsw: spectrum: Protect driver from buggy firmwareAmit Cohen1-1/+1
[ Upstream commit 63b08b1f6834bbb0b4f7783bf63b80c8c8e9a047 ] When processing port up/down events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not the CPU port (local port 0), which exists, but lacks a netdev. This can result in a NULL pointer dereference when calling netif_carrier_{on,off}(). Fix this by bailing early when processing an event reported for the CPU port. Problem was only observed when running on top of a buggy emulator. Fixes: 28b1987ef506 ("mlxsw: spectrum: Register CPU port with devlink") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net/smc: Ensure the active closing peer first closes clcsockTony Lu1-0/+6
[ Upstream commit 606a63c9783a32a45bd2ef0eee393711d75b3284 ] The side that actively closed socket, it's clcsock doesn't enter TIME_WAIT state, but the passive side does it. It should show the same behavior as TCP sockets. Consider this, when client actively closes the socket, the clcsock in server enters TIME_WAIT state, which means the address is occupied and won't be reused before TIME_WAIT dismissing. If we restarted server, the service would be unavailable for a long time. To solve this issue, shutdown the clcsock in [A], perform the TCP active close progress first, before the passive closed side closing it. So that the actively closed side enters TIME_WAIT, not the passive one. Client | Server close() // client actively close | smc_release() | smc_close_active() // PEERCLOSEWAIT1 | smc_close_final() // abort or closed = 1| smc_cdc_get_slot_and_msg_send() | [A] | |smc_cdc_msg_recv_action() // ACTIVE | queue_work(smc_close_wq, &conn->close_work) | smc_close_passive_work() // PROCESSABORT or APPCLOSEWAIT1 | smc_close_passive_abort_received() // only in abort | |close() // server recv zero, close | smc_release() // PROCESSABORT or APPCLOSEWAIT1 | smc_close_active() | smc_close_abort() or smc_close_final() // CLOSED | smc_cdc_get_slot_and_msg_send() // abort or closed = 1 smc_cdc_msg_recv_action() | smc_clcsock_release() queue_work(smc_close_wq, &conn->close_work) | sock_release(tcp) // actively close clc, enter TIME_WAIT smc_close_passive_work() // PEERCLOSEWAIT1 | smc_conn_free() smc_close_passive_abort_received() // CLOSED| smc_conn_free() | smc_clcsock_release() | sock_release(tcp) // passive close clc | Link: https://www.spinics.net/lists/netdev/msg780407.html Fixes: b38d732477e4 ("smc: socket closing and linkgroup cleanup") Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01i2c: virtio: disable timeout handlingVincent Whitchurch1-9/+5
[ Upstream commit 84e1d0bf1d7121759622dabf8fbef4c99ad597c5 ] If a timeout is hit, it can result is incorrect data on the I2C bus and/or memory corruptions in the guest since the device can still be operating on the buffers it was given while the guest has freed them. Here is, for example, the start of a slub_debug splat which was triggered on the next transfer after one transfer was forced to timeout by setting a breakpoint in the backend (rust-vmm/vhost-device): BUG kmalloc-1k (Not tainted): Poison overwritten First byte 0x1 instead of 0x6b Allocated in virtio_i2c_xfer+0x65/0x35c age=350 cpu=0 pid=29 __kmalloc+0xc2/0x1c9 virtio_i2c_xfer+0x65/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in virtio_i2c_xfer+0x32e/0x35c age=244 cpu=0 pid=29 kfree+0x1bd/0x1cc virtio_i2c_xfer+0x32e/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 There is no simple fix for this (the driver would have to always create bounce buffers and hold on to them until the device eventually returns the buffers), so just disable the timeout support for now. Fixes: 3cfc88380413d20f ("i2c: virtio: add a virtio i2c frontend driver") Acked-by: Jie Deng <jie.deng@intel.com> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01erofs: fix deadlock when shrink erofs slabHuang Jianan1-2/+6
[ Upstream commit 57bbeacdbee72a54eb97d56b876cf9c94059fc34 ] We observed the following deadlock in the stress test under low memory scenario: Thread A Thread B - erofs_shrink_scan - erofs_try_to_release_workgroup - erofs_workgroup_try_to_freeze -- A - z_erofs_do_read_page - z_erofs_collection_begin - z_erofs_register_collection - erofs_insert_workgroup - xa_lock(&sbi->managed_pslots) -- B - erofs_workgroup_get - erofs_wait_on_workgroup_freezed -- A - xa_erase - xa_lock(&sbi->managed_pslots) -- B To fix this, it needs to hold xa_lock before freezing the workgroup since xarray will be touched then. So let's hold the lock before accessing each workgroup, just like what we did with the radix tree before. [ Gao Xiang: Jianhua Hao also reports this issue at https://lore.kernel.org/r/b10b85df30694bac8aadfe43537c897a@xiaomi.com ] Link: https://lore.kernel.org/r/20211118135844.3559-1-huangjianan@oppo.com Fixes: 64094a04414f ("erofs: convert workstn to XArray") Reviewed-by: Chao Yu <chao@kernel.org> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Huang Jianan <huangjianan@oppo.com> Reported-by: Jianhua Hao <haojianhua1@xiaomi.com> Signed-off-by: Gao Xiang <xiang@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01scsi: scsi_debug: Zero clear zones at reset write pointerShin'ichiro Kawasaki1-0/+5
[ Upstream commit 2d62253eb1b60f4ce8b39125eee282739b519297 ] When a reset is requested the position of the write pointer is updated but the data in the corresponding zone is not cleared. Instead scsi_debug returns any data written before the write pointer was reset. This is an error and prevents using scsi_debug for stale page cache testing of the BLKRESETZONE ioctl. Zero written data in the zone when resetting the write pointer. Link: https://lore.kernel.org/r/20211122061223.298890-1-shinichiro.kawasaki@wdc.com Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands") Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01scsi: core: sysfs: Fix setting device state to SDEV_RUNNINGMike Christie1-1/+1
[ Upstream commit eb97545d6264b341b06ba7603f52ff6c0b2af6ea ] This fixes an issue added in commit 4edd8cd4e86d ("scsi: core: sysfs: Fix hang when device state is set via sysfs") where if userspace is requesting to set the device state to SDEV_RUNNING when the state is already SDEV_RUNNING, we return -EINVAL instead of count. The commmit above set ret to count for this case, when it should have set it to 0. Link: https://lore.kernel.org/r/20211120164917.4924-1-michael.christie@oracle.com Fixes: 4edd8cd4e86d ("scsi: core: sysfs: Fix hang when device state is set via sysfs") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ice: avoid bpf_prog refcount underflowMarta Plantykow1-1/+17
[ Upstream commit f65ee535df775a13a1046c0a0b2d72db342f8a5b ] Ice driver has the routines for managing XDP resources that are shared between ndo_bpf op and VSI rebuild flow. The latter takes place for example when user changes queue count on an interface via ethtool's set_channels(). There is an issue around the bpf_prog refcounting when VSI is being rebuilt - since ice_prepare_xdp_rings() is called with vsi->xdp_prog as an argument that is used later on by ice_vsi_assign_bpf_prog(), same bpf_prog pointers are swapped with each other. Then it is also interpreted as an 'old_prog' which in turn causes us to call bpf_prog_put on it that will decrement its refcount. Below splat can be interpreted in a way that due to zero refcount of a bpf_prog it is wiped out from the system while kernel still tries to refer to it: [ 481.069429] BUG: unable to handle page fault for address: ffffc9000640f038 [ 481.077390] #PF: supervisor read access in kernel mode [ 481.083335] #PF: error_code(0x0000) - not-present page [ 481.089276] PGD 100000067 P4D 100000067 PUD 1001cb067 PMD 106d2b067 PTE 0 [ 481.097141] Oops: 0000 [#1] PREEMPT SMP PTI [ 481.101980] CPU: 12 PID: 3339 Comm: sudo Tainted: G OE 5.15.0-rc5+ #1 [ 481.110840] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 481.122021] RIP: 0010:dev_xdp_prog_id+0x25/0x40 [ 481.127265] Code: 80 00 00 00 00 0f 1f 44 00 00 89 f6 48 c1 e6 04 48 01 fe 48 8b 86 98 08 00 00 48 85 c0 74 13 48 8b 50 18 31 c0 48 85 d2 74 07 <48> 8b 42 38 8b 40 20 c3 48 8b 96 90 08 00 00 eb e8 66 2e 0f 1f 84 [ 481.148991] RSP: 0018:ffffc90007b63868 EFLAGS: 00010286 [ 481.155034] RAX: 0000000000000000 RBX: ffff889080824000 RCX: 0000000000000000 [ 481.163278] RDX: ffffc9000640f000 RSI: ffff889080824010 RDI: ffff889080824000 [ 481.171527] RBP: ffff888107af7d00 R08: 0000000000000000 R09: ffff88810db5f6e0 [ 481.179776] R10: 0000000000000000 R11: ffff8890885b9988 R12: ffff88810db5f4bc [ 481.188026] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 481.196276] FS: 00007f5466d5bec0(0000) GS:ffff88903fb00000(0000) knlGS:0000000000000000 [ 481.205633] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 481.212279] CR2: ffffc9000640f038 CR3: 000000014429c006 CR4: 00000000003706e0 [ 481.220530] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 481.228771] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 481.237029] Call Trace: [ 481.239856] rtnl_fill_ifinfo+0x768/0x12e0 [ 481.244602] rtnl_dump_ifinfo+0x525/0x650 [ 481.249246] ? __alloc_skb+0xa5/0x280 [ 481.253484] netlink_dump+0x168/0x3c0 [ 481.257725] netlink_recvmsg+0x21e/0x3e0 [ 481.262263] ____sys_recvmsg+0x87/0x170 [ 481.266707] ? __might_fault+0x20/0x30 [ 481.271046] ? _copy_from_user+0x66/0xa0 [ 481.275591] ? iovec_from_user+0xf6/0x1c0 [ 481.280226] ___sys_recvmsg+0x82/0x100 [ 481.284566] ? sock_sendmsg+0x5e/0x60 [ 481.288791] ? __sys_sendto+0xee/0x150 [ 481.293129] __sys_recvmsg+0x56/0xa0 [ 481.297267] do_syscall_64+0x3b/0xc0 [ 481.301395] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 481.307238] RIP: 0033:0x7f5466f39617 [ 481.311373] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb bd 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2f 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 481.342944] RSP: 002b:00007ffedc7f4308 EFLAGS: 00000246 ORIG_RAX: 000000000000002f [ 481.361783] RAX: ffffffffffffffda RBX: 00007ffedc7f5460 RCX: 00007f5466f39617 [ 481.380278] RDX: 0000000000000000 RSI: 00007ffedc7f5360 RDI: 0000000000000003 [ 481.398500] RBP: 00007ffedc7f53f0 R08: 0000000000000000 R09: 000055d556f04d50 [ 481.416463] R10: 0000000000000077 R11: 0000000000000246 R12: 00007ffedc7f5360 [ 481.434131] R13: 00007ffedc7f5350 R14: 00007ffedc7f5344 R15: 0000000000000e98 [ 481.451520] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mxm_wmi mei_me coretemp mei ipmi_si ipmi_msghandler wmi acpi_pad acpi_power_meter ip_tables x_tables autofs4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel ahci crypto_simd cryptd libahci lpc_ich [last unloaded: ice] [ 481.528558] CR2: ffffc9000640f038 [ 481.542041] ---[ end trace d1f24c9ecf5b61c1 ]--- Fix this by only calling ice_vsi_assign_bpf_prog() inside ice_prepare_xdp_rings() when current vsi->xdp_prog pointer is NULL. This way set_channels() flow will not attempt to swap the vsi->xdp_prog pointers with itself. Also, sprinkle around some comments that provide a reasoning about correlation between driver and kernel in terms of bpf_prog refcount. Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Marta Plantykow <marta.a.plantykow@intel.com> Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ice: fix vsi->txq_map sizingMaciej Fijalkowski1-2/+7
[ Upstream commit 792b2086584f25d84081a526beee80d103c2a913 ] The approach of having XDP queue per CPU regardless of user's setting exposed a hidden bug that could occur in case when Rx queue count differ from Tx queue count. Currently vsi->txq_map's size is equal to the doubled vsi->alloc_txq, which is not correct due to the fact that XDP rings were previously based on the Rx queue count. Below splat can be seen when ethtool -L is used and XDP rings are configured: [ 682.875339] BUG: kernel NULL pointer dereference, address: 000000000000000f [ 682.883403] #PF: supervisor read access in kernel mode [ 682.889345] #PF: error_code(0x0000) - not-present page [ 682.895289] PGD 0 P4D 0 [ 682.898218] Oops: 0000 [#1] PREEMPT SMP PTI [ 682.903055] CPU: 42 PID: 2878 Comm: ethtool Tainted: G OE 5.15.0-rc5+ #1 [ 682.912214] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 682.923380] RIP: 0010:devres_remove+0x44/0x130 [ 682.928527] Code: 49 89 f4 55 48 89 fd 4c 89 ff 53 48 83 ec 10 e8 92 b9 49 00 48 8b 9d a8 02 00 00 48 8d 8d a0 02 00 00 49 89 c2 48 39 cb 74 0f <4c> 3b 63 10 74 25 48 8b 5b 08 48 39 cb 75 f1 4c 89 ff 4c 89 d6 e8 [ 682.950237] RSP: 0018:ffffc90006a679f0 EFLAGS: 00010002 [ 682.956285] RAX: 0000000000000286 RBX: ffffffffffffffff RCX: ffff88908343a370 [ 682.964538] RDX: 0000000000000001 RSI: ffffffff81690d60 RDI: 0000000000000000 [ 682.972789] RBP: ffff88908343a0d0 R08: 0000000000000000 R09: 0000000000000000 [ 682.981040] R10: 0000000000000286 R11: 3fffffffffffffff R12: ffffffff81690d60 [ 682.989282] R13: ffffffff81690a00 R14: ffff8890819807a8 R15: ffff88908343a36c [ 682.997535] FS: 00007f08c7bfa740(0000) GS:ffff88a03fd00000(0000) knlGS:0000000000000000 [ 683.006910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 683.013557] CR2: 000000000000000f CR3: 0000001080a66003 CR4: 00000000003706e0 [ 683.021819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 683.030075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 683.038336] Call Trace: [ 683.041167] devm_kfree+0x33/0x50 [ 683.045004] ice_vsi_free_arrays+0x5e/0xc0 [ice] [ 683.050380] ice_vsi_rebuild+0x4c8/0x750 [ice] [ 683.055543] ice_vsi_recfg_qs+0x9a/0x110 [ice] [ 683.060697] ice_set_channels+0x14f/0x290 [ice] [ 683.065962] ethnl_set_channels+0x333/0x3f0 [ 683.070807] genl_family_rcv_msg_doit+0xea/0x150 [ 683.076152] genl_rcv_msg+0xde/0x1d0 [ 683.080289] ? channels_prepare_data+0x60/0x60 [ 683.085432] ? genl_get_cmd+0xd0/0xd0 [ 683.089667] netlink_rcv_skb+0x50/0xf0 [ 683.094006] genl_rcv+0x24/0x40 [ 683.097638] netlink_unicast+0x239/0x340 [ 683.102177] netlink_sendmsg+0x22e/0x470 [ 683.106717] sock_sendmsg+0x5e/0x60 [ 683.110756] __sys_sendto+0xee/0x150 [ 683.114894] ? handle_mm_fault+0xd0/0x2a0 [ 683.119535] ? do_user_addr_fault+0x1f3/0x690 [ 683.134173] __x64_sys_sendto+0x25/0x30 [ 683.148231] do_syscall_64+0x3b/0xc0 [ 683.161992] entry_SYSCALL_64_after_hwframe+0x44/0xae Fix this by taking into account the value that num_possible_cpus() yields in addition to vsi->alloc_txq instead of doubling the latter. Fixes: efc2214b6047 ("ice: Add support for XDP") Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: nexthop: release IPv6 per-cpu dsts when replacing a nexthop groupNikolay Aleksandrov1-2/+23
[ Upstream commit 1005f19b9357b81aa64e1decd08d6e332caaa284 ] When replacing a nexthop group, we must release the IPv6 per-cpu dsts of the removed nexthop entries after an RCU grace period because they contain references to the nexthop's net device and to the fib6 info. With specific series of events[1] we can reach net device refcount imbalance which is unrecoverable. IPv4 is not affected because dsts don't take a refcount on the route. [1] $ ip nexthop list id 200 via 2002:db8::2 dev bridge.10 scope link onlink id 201 via 2002:db8::3 dev bridge scope link onlink id 203 group 201/200 $ ip -6 route 2001:db8::10 nhid 203 metric 1024 pref medium nexthop via 2002:db8::3 dev bridge weight 1 onlink nexthop via 2002:db8::2 dev bridge.10 weight 1 onlink Create rt6_info through one of the multipath legs, e.g.: $ taskset -a -c 1 ./pkt_inj 24 bridge.10 2001:db8::10 (pkt_inj is just a custom packet generator, nothing special) Then remove that leg from the group by replace (let's assume it is id 200 in this case): $ ip nexthop replace id 203 group 201 Now remove the IPv6 route: $ ip -6 route del 2001:db8::10/128 The route won't be really deleted due to the stale rt6_info holding 1 refcnt in nexthop id 200. At this point we have the following reference count dependency: (deleted) IPv6 route holds 1 reference over nhid 203 nh 203 holds 1 ref over id 201 nh 200 holds 1 ref over the net device and the route due to the stale rt6_info Now to create circular dependency between nh 200 and the IPv6 route, and also to get a reference over nh 200, restore nhid 200 in the group: $ ip nexthop replace id 203 group 201/200 And now we have a permanent circular dependncy because nhid 203 holds a reference over nh 200 and 201, but the route holds a ref over nh 203 and is deleted. To trigger the bug just delete the group (nhid 203): $ ip nexthop del id 203 It won't really be deleted due to the IPv6 route dependency, and now we have 2 unlinked and deleted objects that reference each other: the group and the IPv6 route. Since the group drops the reference it holds over its entries at free time (i.e. its own refcount needs to drop to 0) that will never happen and we get a permanent ref on them, since one of the entries holds a reference over the IPv6 route it will also never be released. At this point the dependencies are: (deleted, only unlinked) IPv6 route holds reference over group nh 203 (deleted, only unlinked) group nh 203 holds reference over nh 201 and 200 nh 200 holds 1 ref over the net device and the route due to the stale rt6_info This is the last point where it can be fixed by running traffic through nh 200, and specifically through the same CPU so the rt6_info (dst) will get released due to the IPv6 genid, that in turn will free the IPv6 route, which in turn will free the ref count over the group nh 203. If nh 200 is deleted at this point, it will never be released due to the ref from the unlinked group 203, it will only be unlinked: $ ip nexthop del id 200 $ ip nexthop $ Now we can never release that stale rt6_info, we have IPv6 route with ref over group nh 203, group nh 203 with ref over nh 200 and 201, nh 200 with rt6_info (dst) with ref over the net device and the IPv6 route. All of these objects are only unlinked, and cannot be released, thus they can't release their ref counts. Message from syslogd@dev at Nov 19 14:04:10 ... kernel:[73501.828730] unregister_netdevice: waiting for bridge.10 to become free. Usage count = 3 Message from syslogd@dev at Nov 19 14:04:20 ... kernel:[73512.068811] unregister_netdevice: waiting for bridge.10 to become free. Usage count = 3 Fixes: 7bf4796dd099 ("nexthops: add support for replace") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: ipv6: add fib6_nh_release_dsts stubNikolay Aleksandrov4-0/+22
[ Upstream commit 8837cbbf854246f5f4d565f21e6baa945d37aded ] We need a way to release a fib6_nh's per-cpu dsts when replacing nexthops otherwise we can end up with stale per-cpu dsts which hold net device references, so add a new IPv6 stub called fib6_nh_release_dsts. It must be used after an RCU grace period, so no new dsts can be created through a group's nexthop entry. Similar to fib6_nh_release it shouldn't be used if fib6_nh_init has failed so it doesn't need a dummy stub when IPv6 is not enabled. Fixes: 7bf4796dd099 ("nexthops: add support for replace") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: stmmac: retain PTP clock time during SIOCSHWTSTAMP ioctlsHolger Assmann3-47/+81
[ Upstream commit a6da2bbb0005e6b4909472962c9d0af29e75dd06 ] Currently, when user space emits SIOCSHWTSTAMP ioctl calls such as enabling/disabling timestamping or changing filter settings, the driver reads the current CLOCK_REALTIME value and programming this into the NIC's hardware clock. This might be necessary during system initialization, but at runtime, when the PTP clock has already been synchronized to a grandmaster, a reset of the timestamp settings might result in a clock jump. Furthermore, if the clock is also controlled by phc2sys in automatic mode (where the UTC offset is queried from ptp4l), that UTC-to-TAI offset (currently 37 seconds in 2021) would be temporarily reset to 0, and it would take a long time for phc2sys to readjust so that CLOCK_REALTIME and the PHC are apart by 37 seconds again. To address the issue, we introduce a new function called stmmac_init_tstamp_counter(), which gets called during ndo_open(). It contains the code snippet moved from stmmac_hwtstamp_set() that manages the time synchronization. Besides, the sub second increment configuration is also moved here since the related values are hardware dependent and runtime invariant. Furthermore, the hardware clock must be kept running even when no time stamping mode is selected in order to retain the synchronized time base. That way, timestamping can be enabled again at any time only with the need to compensate the clock's natural drifting. As a side effect, this patch fixes the issue that ptp_clock_info::enable can be called before SIOCSHWTSTAMP and the driver (which looks at priv->systime_flags) was not prepared to handle that ordering. Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver") Reported-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Holger Assmann <h.assmann@pengutronix.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01nfp: checking parameter process for rx-usecs/tx-usecs is invalidDiana Wang2-4/+1
[ Upstream commit 3bd6b2a838ba6a3b86d41b077f570b1b61174def ] Use nn->tlv_caps.me_freq_mhz instead of nn->me_freq_mhz to check whether rx-usecs/tx-usecs is valid. This is because nn->tlv_caps.me_freq_mhz represents the clock_freq (MHz) of the flow processing cores (FPC) on the NIC. While nn->me_freq_mhz is not be set. Fixes: ce991ab6662a ("nfp: read ME frequency from vNIC ctrl memory") Signed-off-by: Diana Wang <na.wang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ipv6: fix typos in __ip6_finish_output()Eric Dumazet1-1/+1
[ Upstream commit 19d36c5f294879949c9d6f57cb61d39cc4c48553 ] We deal with IPv6 packets, so we need to use IP6CB(skb)->flags and IP6SKB_REROUTED, instead of IPCB(skb)->flags and IPSKB_REROUTED Found by code inspection, please double check that fixing this bug does not surface other bugs. Fixes: 09ee9dba9611 ("ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tobias Brunner <tobias@strongswan.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Tested-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01firmware: smccc: Fix check for ARCH_SOC_ID not implementedMichael Kelley1-1/+1
[ Upstream commit e95d8eaee21cd0d117d34125d4cdc97489c1ab82 ] The ARCH_FEATURES function ID is a 32-bit SMC call, which returns a 32-bit result per the SMCCC spec. Current code is doing a 64-bit comparison against -1 (SMCCC_RET_NOT_SUPPORTED) to detect that the feature is unimplemented. That check doesn't work in a Hyper-V VM, where the upper 32-bits are zero as allowed by the spec. Cast the result as an 'int' so the comparison works. The change also makes the code consistent with other similar checks in this file. Fixes: 821b67fa4639 ("firmware: smccc: Add ARCH_SOC_ID support") Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01af_unix: fix regression in read after shutdownVincent Whitchurch1-3/+0
[ Upstream commit f9390b249c90a15a4d9e69fbfb7a53c860b1fcaf ] On kernels before v5.15, calling read() on a unix socket after shutdown(SHUT_RD) or shutdown(SHUT_RDWR) would return the data previously written or EOF. But now, while read() after shutdown(SHUT_RD) still behaves the same way, read() after shutdown(SHUT_RDWR) always fails with -EINVAL. This behaviour change was apparently inadvertently introduced as part of a bug fix for a different regression caused by the commit adding sockmap support to af_unix, commit 94531cfcbe79c359 ("af_unix: Add unix_stream_proto for sockmap"). Those commits, for unclear reasons, started setting the socket state to TCP_CLOSE on shutdown(SHUT_RDWR), while this state change had previously only been done in unix_release_sock(). Restore the original behaviour. The sockmap tests in tests/selftests/bpf continue to pass after this patch. Fixes: d0c6416bd7091647f60 ("unix: Fix an issue in unix_shutdown causing the other end read/write failures") Link: https://lore.kernel.org/lkml/20211111140000.GA10779@axis.com/ Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01mptcp: use delegate action to schedule 3rd ack retransPaolo Abeni3-41/+60
[ Upstream commit bcd97734318d1d87bb237dbc0a60c81237b0ac50 ] Scheduling a delack in mptcp_established_options_mp() is not a good idea: such function is called by tcp_send_ack() and the pending delayed ack will be cleared shortly after by the tcp_event_ack_sent() call in __tcp_transmit_skb(). Instead use the mptcp delegated action infrastructure to schedule the delayed ack after the current bh processing completes. Additionally moves the schedule_3rdack_retransmission() helper into protocol.c to avoid making it visible in a different compilation unit. Fixes: ec3edaa7ca6ce02f ("mptcp: Add handling of outgoing MP_JOIN requests") Reviewed-by: Mat Martineau <mathew.j.martineau>@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01mptcp: fix delack timerEric Dumazet1-1/+2
[ Upstream commit ee50e67ba0e17b1a1a8d76691d02eadf9e0f392c ] To compute the rtx timeout schedule_3rdack_retransmission() does multiple things in the wrong way: srtt_us is measured in usec/8 and the timeout itself is an absolute value. Fixes: ec3edaa7ca6ce02f ("mptcp: Add handling of outgoing MP_JOIN requests") Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau>@linux.intel.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ALSA: intel-dsp-config: add quirk for JSL devices based on ES8336 codecPierre-Louis Bossart1-0/+9
[ Upstream commit fa9730b4f28b7bd183d28a0bf636ab7108de35d7 ] These devices are based on an I2C/I2S device, we need to force the use of the SOF driver otherwise the legacy HDaudio driver will be loaded - only HDMI will be supported. We previously added support for other Intel platforms but missed JasperLake. BugLink: https://github.com/thesofproject/linux/issues/3210 Fixes: 9d36ceab9415 ('ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211027023254.24955-1-yung-chuan.liao@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01xen/pvh: add missing prototype to headerJuergen Gross1-0/+1
[ Upstream commit 2a0991929aba0a3dd6fe51d1daba06a93a96a021 ] The prototype of mem_map_via_hcall() is missing in its header, so add it. Reported-by: kernel test robot <lkp@intel.com> Fixes: a43fb7da53007e67ad ("xen/pvh: Move Xen code for getting mem map via hcall out of common file") Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211119153913.21678-1-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01x86/pvh: add prototype for xen_pvh_init()Juergen Gross1-0/+4
[ Upstream commit 767216796cb9ae7f1e3bdf43a7b13b2bf100c2d2 ] xen_pvh_init() is lacking a prototype in a header, add it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211006061950.9227-1-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01iavf: Fix VLAN feature flags after VFRBrett Creeley3-23/+56
[ Upstream commit 5951a2b9812d8227d33f20d1899fae60e4f72c04 ] When a VF goes through a reset, it's possible for the VF's feature set to change. For example it may lose the VIRTCHNL_VF_OFFLOAD_VLAN capability after VF reset. Unfortunately, the driver doesn't correctly deal with this situation and errors are seen from downing/upping the interface and/or moving the interface in/out of a network namespace. When setting the interface down/up we see the following errors after the VIRTCHNL_VF_OFFLOAD_VLAN capability was taken away from the VF: ice 0000:51:00.1: VF 1 failed opcode 12, retval: -64 iavf 0000:51:09.1: Failed to add VLAN filter, error IAVF_NOT_SUPPORTED ice 0000:51:00.1: VF 1 failed opcode 13, retval: -64 iavf 0000:51:09.1: Failed to delete VLAN filter, error IAVF_NOT_SUPPORTED These add/delete errors are happening because the VLAN filters are tracked internally to the driver and regardless of the VLAN_ALLOWED() setting the driver tries to delete/re-add them over virtchnl. Fix the delete failure by making sure to delete any VLAN filter tracking in the driver when a removal request is made, while preventing the virtchnl request. This makes it so the driver's VLAN list is up to date and the errors are Fix the add failure by making sure the check for VLAN_ALLOWED() during reset is done after the VF receives its capability list from the PF via VIRTCHNL_OP_GET_VF_RESOURCES. If VLAN functionality is not allowed, then prevent requesting re-adding the filters over virtchnl. When moving the interface into a network namespace we see the following errors after the VIRTCHNL_VF_OFFLOAD_VLAN capability was taken away from the VF: iavf 0000:51:09.1 enp81s0f1v1: NIC Link is Up Speed is 25 Gbps Full Duplex iavf 0000:51:09.1 temp_27: renamed from enp81s0f1v1 iavf 0000:51:09.1 mgmt: renamed from temp_27 iavf 0000:51:09.1 dev27: set_features() failed (-22); wanted 0x020190001fd54833, left 0x020190001fd54bb3 These errors are happening because we aren't correctly updating the netdev capabilities and dealing with ndo_fix_features() and ndo_set_features() correctly. Fix this by only reporting errors in the driver's ndo_set_features() callback when VIRTCHNL_VF_OFFLOAD_VLAN is not allowed and any attempt to enable the VLAN features is made. Also, make sure to disable VLAN insertion, filtering, and stripping since the VIRTCHNL_VF_OFFLOAD_VLAN flag applies to all of them and not just VLAN stripping. Also, after we process the capabilities in the VF reset path, make sure to call netdev_update_features() in case the capabilities have changed in order to update the netdev's feature set to match the VF's actual capabilities. Lastly, make sure to always report success on VLAN filter delete when VIRTCHNL_VF_OFFLOAD_VLAN is not supported. The changed flow in iavf_del_vlans() allows the stack to delete previosly existing VLAN filters even if VLAN filtering is not allowed. This makes it so the VLAN filter list is up to date. Fixes: 8774370d268f ("i40e/i40evf: support for VF VLAN tag stripping control") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01iavf: Fix refreshing iavf adapter stats on ethtool requestJedrzej Jagielski4-0/+25
[ Upstream commit 3b5bdd18eb76e7570d9bacbcab6828a9b26ae121 ] Currently iavf adapter statistics are refreshed only in a watchdog task, triggered approximately every two seconds, which causes some ethtool requests to return outdated values. Add explicit statistics refresh when requested by ethtool -S. Fixes: b476b0030e61 ("iavf: Move commands processing to the separate function") Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01iavf: Prevent changing static ITR values if adaptive moderation is onNitesh B Venkatesh1-4/+26
[ Upstream commit e792779e6b639c182df91b46ac1e5803460b0b15 ] Resolve being able to change static values on VF when adaptive interrupt moderation is enabled. This problem is fixed by checking the interrupt settings is not a combination of change of static value while adaptive interrupt moderation is turned on. Without this fix, the user would be able to change static values on VF with adaptive moderation enabled. Fixes: 65e87c0398f5 ("i40evf: support queue-specific settings for interrupt moderation") Signed-off-by: Nitesh B Venkatesh <nitesh.b.venkatesh@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01HID: magicmouse: prevent division by 0 on scrollClaudia Pellegrino1-2/+5
[ Upstream commit a1091118e0d6d84c2fdb94e6c397ac790bfb9dd6 ] In hid_magicmouse, if the user has set scroll_speed to a value between 55 and 63 and scrolls seven times in quick succession, the step_hr variable in the magicmouse_emit_touch function becomes 0. That causes a division by zero further down in the function when it does `step_x_hr /= step_hr`. To reproduce, create `/etc/modprobe.d/hid_magicmouse.conf` with the following content: ``` options hid_magicmouse scroll_acceleration=1 scroll_speed=55 ``` Then reboot, connect a Magic Mouse and scroll seven times quickly. The system will freeze for a minute, and after that `dmesg` will confirm that a division by zero occurred. Enforce a minimum of 1 for the variable so the high resolution step count can never reach 0 even at maximum scroll acceleration. Fixes: d4b9f10a0eb6 ("HID: magicmouse: enable high-resolution scroll") Signed-off-by: Claudia Pellegrino <linux@cpellegrino.de> Tested-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01HID: input: set usage type to key on keycode remapThomas Weißschuh1-0/+1
[ Upstream commit 3e6a950d98366f5e716904e9a7e8ffc7ed638bd6 ] When a scancode is manually remapped that previously was not handled as key, then the old usage type was incorrectly reused. This caused issues on a "04b3:301b IBM Corp. SK-8815 Keyboard" which has marked some of its keys with an invalid HID usage. These invalid usage keys are being ignored since support for USB programmable buttons was added. The scancodes are however remapped explicitly by the systemd hwdb to the keycodes that are printed on the physical buttons. During this mapping step the existing usage is retrieved which will be found with a default type of 0 (EV_SYN) instead of EV_KEY. The events with the correct code but EV_SYN type are not forwarded to userspace. This also leads to a kernel oops when trying to print the report descriptor via debugfs. hid_resolv_event() tries to resolve a EV_SYN event with an EV_KEY code which leads to an out-of-bounds access in the EV_SYN names array. Fixes: bcfa8d1457 ("HID: input: Add support for Programmable Buttons") Fixes: f5854fad39 ("Input: hid-input - allow mapping unknown usages") Reported-by: Brent Roman <brent@mbari.org> Tested-by: Brent Roman <brent@mbari.org> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01HID: input: Fix parsing of HID_CP_CONSUMER_CONTROL fieldsHans de Goede1-3/+2
[ Upstream commit 7fc48fd6b2c0acacd8130d83d2a037670d6192d2 ] Fix parsing of HID_CP_CONSUMER_CONTROL fields which are not in the HID_CP_PROGRAMMABLEBUTTONS collection. Fixes: bcfa8d14570d ("HID: input: Add support for Programmable Buttons") BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2018096 Cc: Thomas Weißschuh <linux@weissschuh.net> Suggested-by: Benjamin Tissoires <btissoir@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-By: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: marvell: prestera: fix double free issue on err pathVolodymyr Mytnyk1-4/+2
[ Upstream commit e8d032507cb7912baf1d3e0af54516f823befefd ] fix error path handling in prestera_bridge_port_join() that cases prestera driver to crash (see below). Trace: Internal error: Oops: 96000044 [#1] SMP Modules linked in: prestera_pci prestera uio_pdrv_genirq CPU: 1 PID: 881 Comm: ip Not tainted 5.15.0 #1 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : prestera_bridge_destroy+0x2c/0xb0 [prestera] lr : prestera_bridge_port_join+0x2cc/0x350 [prestera] sp : ffff800011a1b0f0 ... x2 : ffff000109ca6c80 x1 : dead000000000100 x0 : dead000000000122 Call trace: prestera_bridge_destroy+0x2c/0xb0 [prestera] prestera_bridge_port_join+0x2cc/0x350 [prestera] prestera_netdev_port_event.constprop.0+0x3c4/0x450 [prestera] prestera_netdev_event_handler+0xf4/0x110 [prestera] raw_notifier_call_chain+0x54/0x80 call_netdevice_notifiers_info+0x54/0xa0 __netdev_upper_dev_link+0x19c/0x380 Fixes: e1189d9a5fbe ("net: marvell: prestera: Add Switchdev driver implementation") Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01net: marvell: prestera: fix brige port operationVolodymyr Mytnyk1-1/+1
[ Upstream commit 253e9b4d11e577bb8cbc77ef68a9ff46438065ca ] Return NOTIFY_DONE (dont't care) for switchdev notifications that prestera driver don't know how to handle them. With introduction of SWITCHDEV_BRPORT_[UN]OFFLOADED switchdev events, the driver rejects adding swport to bridge operation which is handled by prestera_bridge_port_join() func. The root cause of this is that prestera driver returns error (EOPNOTSUPP) in prestera_switchdev_blk_event() handler for unknown swdev events. This causes switchdev_bridge_port_offload() to fail when adding port to bridge in prestera_bridge_port_join(). Fixes: 957e2235e526 ("net: make switchdev_bridge_port_{,unoffload} loosely coupled with the bridge") Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01drm/aspeed: Fix vga_pw sysfs outputJoel Stanley1-1/+1
[ Upstream commit b4a6aaeaf4aa79f23775f6688a7e8db3ee1c1303 ] Before the drm driver had support for this file there was a driver that exposed the contents of the vga password register to userspace. It would present the entire register instead of interpreting it. The drm implementation chose to mask of the lower bit, without explaining why. This breaks the existing userspace, which is looking for 0xa8 in the lower byte. Change our implementation to expose the entire register. Fixes: 696029eb36c0 ("drm/aspeed: Add sysfs for output settings") Reported-by: Oskar Senft <osk@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Tested-by: Oskar Senft <osk@google.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211117010145.297253-1-joel@jms.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01drm/vc4: fix error code in vc4_create_object()Dan Carpenter1-1/+1
[ Upstream commit 96c5f82ef0a145d3e56e5b26f2bf6dcd2ffeae1c ] The ->gem_create_object() functions are supposed to return NULL if there is an error. None of the callers expect error pointers so returing one will lead to an Oops. See drm_gem_vram_create(), for example. Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211118111416.GC1147@kili Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01scsi: mpt3sas: Fix incorrect system timestampSreekanth Reddy1-2/+2
[ Upstream commit 5ecae9f8c705fae85fe4d2ed9f1b9cddf91e88e9 ] For updating the IOC firmware's timestamp with system timestamp, the driver issues the Mpi26IoUnitControlRequest message. While framing the Mpi26IoUnitControlRequest, the driver should copy the lower 32 bits of the current timestamp into IOCParameterValue field and the higher 32 bits into Reserved7 field. Link: https://lore.kernel.org/r/20211117123215.25487-1-sreekanth.reddy@broadcom.com Fixes: f98790c00375 ("scsi: mpt3sas: Sync time periodically between driver and firmware") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01scsi: mpt3sas: Fix system going into read-only modeSreekanth Reddy2-1/+60
[ Upstream commit 91202a01a2fb2b78da3d03811b6d3d973ae426aa ] While determining the SAS address of a drive, the driver checks whether the handle number is less than the HBA phy count or not. If the handle number is less than the HBA phy count then driver assumes that this handle belongs to HBA and hence it assigns the HBA SAS address. During IOC firmware downgrade operation, if the number of HBA phys is reduced and the OS drive's device handle drops below the phy count while determining the drive's SAS address, the driver ends up using the HBA's SAS address. This leads to a mismatch of drive's SAS address and hence the driver unregisters the OS drive and the system goes into read-only mode. Update the IOC's num_phys to the HBA phy count provided by actual loaded firmware. Link: https://lore.kernel.org/r/20211117105058.3505-1-sreekanth.reddy@broadcom.com Fixes: a5e99fda0172 ("scsi: mpt3sas: Update hba_port objects after host reset") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01scsi: mpt3sas: Fix kernel panic during drive powercycle testSreekanth Reddy1-1/+1
[ Upstream commit 0ee4ba13e09c9d9c1cb6abb59da8295d9952328b ] While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL. Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01scsi: qla2xxx: edif: Fix off by one bug in qla_edif_app_getfcinfo()Dan Carpenter1-1/+1
[ Upstream commit e11e285b9cd132db21568b5d29c291f590841944 ] The > comparison needs to be >= to prevent accessing one element beyond the end of the app_reply->ports[] array. Link: https://lore.kernel.org/r/20211109115219.GE16587@kili Fixes: 7878f22a2e03 ("scsi: qla2xxx: edif: Add getfcinfo and statistic bsgs") Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01drm/nouveau/acr: fix a couple NULL vs IS_ERR() checksDan Carpenter2-4/+8
[ Upstream commit b371fd131fcec59f6165c80778bdc2cd1abd616b ] The nvkm_acr_lsfw_add() function never returns NULL. It returns error pointers on error. Fixes: 22dcda45a3d1 ("drm/nouveau/acr: implement new subdev to replace "secure boot"") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211118111314.GB1147@kili Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCETakashi Iwai2-5/+5
[ Upstream commit 187bea472600dcc8d2eb714335053264dd437172 ] When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential buffer overflow and panics. The code in sofcpga bootstrapping contains the memcpy() calls are mistakenly translated as the shorter size, hence it triggers a panic as if it were overflowing. This patch changes the secondary_trampoline and *_end definitions to arrays for avoiding the false-positive crash above. Fixes: 9c4566a117a6 ("ARM: socfpga: Enable SMP for socfpga") Suggested-by: Kees Cook <keescook@chromium.org> Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473 Link: https://lore.kernel.org/r/20211117193244.31162-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-14 10:04:08 +0300