summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx6dl-sabreauto.dts
AgeCommit message (Collapse)AuthorFilesLines
2019-04-11ARM: dts: imx6dl-sabreauto: update opp table for auto partAnson Huang1-0/+15
Update i.MX6DL automotive part's opp table according to i.MX6DL automotive datasheet Rev.9, 11/2018, it adds 996MHz set-point support as below: LDO enabled(min value): 996MHz: VDDARM: 1.275V, VDDSOC: 1.175V; 792MHz: VDDARM: 1.150V, VDDSOC: 1.150V; 396MHz: VDDARM: 1.125V, VDDSOC: 1.150V; Adding 25mV to cover board IR drop, for LDO enabled mode of 996MHz, as the max value of LDO output can NOT exceed 1.3V, so 25mV is NOT added for VDDARM. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-15ARM: dts: imx: Switch NXP boards to SPDX identifierFabio Estevam1-7/+3
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2013-08-22ARM: dts: imx: share pad macro names between imx6q and imx6dlShawn Guo1-22/+0
The imx6q and imx6dl are two pin-to-pin compatible SoCs. The same board design can work with either chip plugged into the socket, e.g. sabresd and sabreauto boards. We currently define pin groups in imx6q.dtsi and imx6dl.dtsi respectively because the pad macro names are different between two chips. This brings a maintenance burden on having the same label point to the same pin group defined in two places. The patch replaces prefix MX6Q_ and MX6DL_ with MX6QDL_ for both SoCs pad macro names. Then the pin groups becomes completely common between imx6q and imx6dl and can just be moved into imx6qdl.dtsi, so that the long term maintenance of imx6q/dt pin settings becomes easier. Unfortunately, the change brings some dramatic diff stat, but it's all about DTS file, and the ultimate net diff stat is good. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIMHuang Shijie1-1/+8
In the imx6q-sabreauto and imx6dl-sabreauto boards, the pin MX6Q{DL}_PAD_EIM_D19 is used as a GPIO for SPI NOR, but it is used as a data pin for the WEIM NOR. In order to fix the conflict, this patch removes the pin from the hog, and adds a new board-level pinctrl: pinctrl_ecspi1_sabreauto. The SPI NOR selects this pinctrl_ecspi1_sabreauto when it is enabled. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: dts: imx6dl: add a gpio for hogHuang Shijie1-0/+1
The SPI/NOR needs this gpio for CS. So add this gpio in the hog pinctrl. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09ARM: dts: imx: add initial imx6dl-sabreauto supportShawn Guo1-0/+31
Add initial imx6dl-sabreauto support based on the common stuff already in imx6qdl-sabreauto.dtsi. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>