summaryrefslogtreecommitdiff
path: root/arch/arm64
AgeCommit message (Collapse)AuthorFilesLines
2022-04-27arm64: dts: qcom: add IPA qcom,qmp propertyAlex Elder3-0/+6
commit 73419e4d2fd1b838fcb1df6a978d67b3ae1c5c01 upstream. At least three platforms require the "qcom,qmp" property to be specified, so the IPA driver can request register retention across power collapse. Update DTS files accordingly. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220201140723.467431-1-elder@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27arm64: dts: imx: Fix imx8*-var-som touchscreen property sizesRob Herring2-8/+8
[ Upstream commit 1bc12d301594eafde0a8529d28d459af81053b3a ] The common touchscreen properties are all 32-bit, not 16-bit. These properties must not be too important as they are all ignored in case of an error reading them. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/Yk3moe6Hz8ELM0iS@robh.at.kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27arm64: mm: fix p?d_leaf()Muchun Song1-2/+2
[ Upstream commit 23bc8f69f0eceecbb87c3801d2e48827d2dca92b ] The pmd_leaf() is used to test a leaf mapped PMD, however, it misses the PROT_NONE mapped PMD on arm64. Fix it. A real world issue [1] caused by this was reported by Qian Cai. Also fix pud_leaf(). Link: https://patchwork.kernel.org/comment/24798260/ [1] Fixes: 8aa82df3c123 ("arm64: mm: add p?d_leaf() definitions") Reported-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Link: https://lore.kernel.org/r/20220422060033.48711-1-songmuchun@bytedance.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27arm64/mm: drop HAVE_ARCH_PFN_VALIDAnshuman Khandual3-39/+0
commit 3de360c3fdb34fbdbaf6da3af94367d3fded95d3 upstream. CONFIG_SPARSEMEM_VMEMMAP is now the only available memory model on arm64 platforms and free_unused_memmap() would just return without creating any holes in the memmap mapping. There is no need for any special handling in pfn_valid() and HAVE_ARCH_PFN_VALID can just be dropped. This also moves the pfn upper bits sanity check into generic pfn_valid(). [rppt: rebased on v5.15-rc3] Link: https://lkml.kernel.org/r/1621947349-25421-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Mike Rapoport <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/r/20210930013039.11260-3-rppt@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Fixes: 859a85ddf90e ("mm: remove pfn_valid_within() and CONFIG_HOLES_IN_ZONE") Link: https://lore.kernel.org/r/Yl0IZWT2nsiYtqBT@linux.ibm.com Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20arm64: alternatives: mark patch_alternative() as `noinstr`Joey Gouly1-3/+3
[ Upstream commit a2c0b0fbe01419f8f5d1c0b9c581631f34ffce8b ] The alternatives code must be `noinstr` such that it does not patch itself, as the cache invalidation is only performed after all the alternatives have been applied. Mark patch_alternative() as `noinstr`. Mark branch_insn_requires_update() and get_alt_insn() with `__always_inline` since they are both only called through patch_alternative(). Booting a kernel in QEMU TCG with KCSAN=y and ARM64_USE_LSE_ATOMICS=y caused a boot hang: [ 0.241121] CPU: All CPU(s) started at EL2 The alternatives code was patching the atomics in __tsan_read4() from LL/SC atomics to LSE atomics. The following fragment is using LL/SC atomics in the .text section: | <__tsan_unaligned_read4+304>: ldxr x6, [x2] | <__tsan_unaligned_read4+308>: add x6, x6, x5 | <__tsan_unaligned_read4+312>: stxr w7, x6, [x2] | <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304> This LL/SC atomic sequence was to be replaced with LSE atomics. However since the alternatives code was instrumentable, __tsan_read4() was being called after only the first instruction was replaced, which led to the following code in memory: | <__tsan_unaligned_read4+304>: ldadd x5, x6, [x2] | <__tsan_unaligned_read4+308>: add x6, x6, x5 | <__tsan_unaligned_read4+312>: stxr w7, x6, [x2] | <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304> This caused an infinite loop as the `stxr` instruction never completed successfully, so `w7` was always 0. Signed-off-by: Joey Gouly <joey.gouly@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220405104733.11476-1-joey.gouly@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20cpuidle: PSCI: Move the `has_lpi` check to the beginning of the functionMario Limonciello1-3/+3
commit 01f6c7338ce267959975da65d86ba34f44d54220 upstream. Currently the first thing checked is whether the PCSI cpu_suspend function has been initialized. Another change will be overloading `acpi_processor_ffh_lpi_probe` and calling it sooner. So make the `has_lpi` check the first thing checked to prepare for that change. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13arm64: patch_text: Fixup last cpu should be masterGuo Ren1-2/+2
commit 31a099dbd91e69fcab55eef4be15ed7a8c984918 upstream. These patch_text implementations are using stop_machine_cpuslocked infrastructure with atomic cpu_count. The original idea: When the master CPU patch_text, the others should wait for it. But current implementation is using the first CPU as master, which couldn't guarantee the remaining CPUs are waiting. This patch changes the last CPU as the master to solve the potential risk. Fixes: ae16480785de ("arm64: introduce interfaces to hotpatch kernel and module code") Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220407073323.743224-2-guoren@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13arm64: Add part number for Arm Cortex-A78AEChanho Park2-0/+3
commit 83bea32ac7ed37bbda58733de61fc9369513f9f9 upstream. Add the MIDR part number info for the Arm Cortex-A78AE[1] and add it to spectre-BHB affected list[2]. [1]: https://developer.arm.com/Processors/Cortex-A78AE [2]: https://developer.arm.com/Arm%20Security%20Center/Spectre-BHB Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: James Morse <james.morse@arm.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220407091128.8700-1-chanho61.park@samsung.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13arch/arm64: Fix topology initialization for core schedulingPhil Auld1-1/+1
[ Upstream commit 5524cbb1bfcdff0cad0aaa9f94e6092002a07259 ] Arm64 systems rely on store_cpu_topology() to call update_siblings_masks() to transfer the toplogy to the various cpu masks. This needs to be done before the call to notify_cpu_starting() which tells the scheduler about each cpu found, otherwise the core scheduling data structures are setup in a way that does not match the actual topology. With smt_mask not setup correctly we bail on `cpumask_weight(smt_mask) == 1` for !leaders in: notify_cpu_starting() cpuhp_invoke_callback_range() sched_cpu_starting() sched_core_cpu_starting() which leads to rq->core not being correctly set for !leader-rq's. Without this change stress-ng (which enables core scheduling in its prctl tests in newer versions -- i.e. with PR_SCHED_CORE support) causes a warning and then a crash (trimmed for legibility): [ 1853.805168] ------------[ cut here ]------------ [ 1853.809784] task_rq(b)->core != rq->core [ 1853.809792] WARNING: CPU: 117 PID: 0 at kernel/sched/fair.c:11102 cfs_prio_less+0x1b4/0x1c4 ... [ 1854.015210] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 ... [ 1854.231256] Call trace: [ 1854.233689] pick_next_task+0x3dc/0x81c [ 1854.237512] __schedule+0x10c/0x4cc [ 1854.240988] schedule_idle+0x34/0x54 Fixes: 9edeaea1bc45 ("sched: Core-wide rq->lock") Signed-off-by: Phil Auld <pauld@redhat.com> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lore.kernel.org/r/20220331153926.25742-1-pauld@redhat.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: ls1046a: Update i2c node dma propertiesKuldeep Singh1-3/+3
commit eeeb4f1075d71d67083c75f69247206e9b3d9f4a upstream. Reorder dmas and dma-names properties for i2c controller node to make it compliant with bindings. Fixes: 8126d88162a5 ("arm64: dts: add QorIQ LS1046A SoC support") Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> CC: soc@kernel.org Link: https://lore.kernel.org/r/20220326042313.97862-5-singh.kuldeep87k@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08arm64: dts: ls1043a: Update i2c dma propertiesKuldeep Singh1-3/+3
commit aa4df840d1c5eab2bb33695efe4409b3e5526749 upstream. Reorder dmas and dma-names properties for i2c controller node to make it compliant with bindings. Fixes: 6d453cd22357 ("arm64: dts: add Freescale LS1043a SoC support") Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> CC: soc@kernel.org Link: https://lore.kernel.org/r/20220326042313.97862-4-singh.kuldeep87k@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definitionWill Deacon1-1/+1
commit 770093459b9b333380aa71f2c31c60b14895c1df upstream. Commit 031495635b46 ("arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones") introduced different definitions for 'arm64_dma_phys_limit' depending on CONFIG_ZONE_DMA{,32} based on a late suggestion from Pasha. Sadly, this results in a build error when passing W=1: | arch/arm64/mm/init.c:90:19: error: conflicting type qualifiers for 'arm64_dma_phys_limit' Drop the 'const' for now and use '__ro_after_init' consistently. Link: https://lore.kernel.org/r/202203090241.aj7paWeX-lkp@intel.com Link: https://lore.kernel.org/r/CA+CK2bDbbx=8R=UthkMesWOST8eJMtOGJdfMRTFSwVmo0Vn0EA@mail.gmail.com Fixes: 031495635b46 ("arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones") Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08arm64: defconfig: build imx-sdma as a moduleMarcel Ziswiler1-1/+1
[ Upstream commit e95622289f263662240544a9f0009b25c19e64d4 ] This avoids firmware load error and sysfs fallback reported as follows: [ 0.199448] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 [ 0.199487] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: module: remove (NOLOAD) from linker scriptFangrui Song1-3/+3
[ Upstream commit 4013e26670c590944abdab56c4fa797527b74325 ] On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually inappropriate for .plt and .text.* sections which are always SHT_PROGBITS. In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway and (NOLOAD) will be essentially ignored. In ld.lld, since https://reviews.llvm.org/D118840 ("[ELF] Support (TYPE=<value>) to customize the output section type"), ld.lld will report a `section type mismatch` error. Just remove (NOLOAD) to fix the error. [1] https://lld.llvm.org/ELF/linker_script.html As of today, "The section should be marked as not loadable" on https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is outdated for ELF. Tested-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Fangrui Song <maskray@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220218081209.354383-1-maskray@google.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08bpf, arm64: Feed byte-offset into bpf line infoHou Tao1-0/+5
[ Upstream commit dda7596c109fc382876118627e29db7607cde35d ] insn_to_jit_off passed to bpf_prog_fill_jited_linfo() is calculated in instruction granularity instead of bytes granularity, but BPF line info requires byte offset. bpf_prog_fill_jited_linfo() will be the last user of ctx.offset before it is freed, so convert the offset into byte-offset before calling into bpf_prog_fill_jited_linfo() in order to fix the line info dump on arm64. Fixes: 37ab566c178d ("bpf: arm64: Enable arm64 jit to provide bpf_line_info") Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220226121906.5709-3-houtao1@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08bpf, arm64: Call build_prologue() first in first JIT passHou Tao1-5/+8
[ Upstream commit 68e4f238b0e9d3670a1612ad900a6e98b2b3f7dd ] BPF line info needs ctx->offset to be the instruction offset in the whole JITed image instead of the body itself, so also call build_prologue() first in first JIT pass. Fixes: 37ab566c178d ("bpf: arm64: Enable arm64 jit to provide bpf_line_info") Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220226121906.5709-2-houtao1@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-fireflyRob Herring1-2/+2
[ Upstream commit 37cbd3c522869247ed4525b5042ff4c6a276c813 ] A label reference without brackets is a path string, not a phandle as intended. Add the missing brackets. Fixes: a5002c41c383 ("arm64: dts: rockchip: add WiFi module support for Firefly-RK3399") Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220304202559.317749-1-robh@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: broadcom: Fix sata nodenameFrank Wunderlich1-1/+1
[ Upstream commit 55927cb44db43a57699fa652e2437a91620385dc ] After converting ahci-platform txt binding to yaml nodename is reported as not matching the standard: arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dt.yaml: ahci@663f2000: $nodename:0: 'ahci@663f2000' does not match '^sata(@.*)?$' Fix it to match binding. Fixes: ac9aae00f0fc ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: ns2: Fix spi-cpol and spi-cpha propertyKuldeep Singh1-4/+4
[ Upstream commit c953c764e505428f59ffe6afb1c73b89b5b1ac35 ] Broadcom ns2 platform has spi-cpol and spi-cpho properties set incorrectly. As per spi-slave-peripheral-prop.yaml, these properties are of flag or boolean type and not integer type. Fix the values. Fixes: d69dbd9f41a7c (arm64: dts: Add ARM PL022 SPI DT nodes for NS2) Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> CC: Ray Jui <rjui@broadcom.com> CC: Scott Branden <sbranden@broadcom.com> CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: qcom: sm8350: Correct TCS configuration for apps rscMaulik Shah1-1/+1
[ Upstream commit a131255e4ad1ef8d4873ecba21561ba272b2547a ] Correct the TCS config by updating the number of TCSes for each type. Cc: devicetree@vger.kernel.org Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC") Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1641749107-31979-4-git-send-email-quic_mkshah@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: qcom: sm8150: Correct TCS configuration for apps rscMaulik Shah1-3/+3
[ Upstream commit 17ac8af678b6da6a8f1df7da8ebf2c5198741827 ] Correct the TCS config by updating the number of TCSes for each type. Cc: devicetree@vger.kernel.org Fixes: d8cf9372b654 ("arm64: dts: qcom: sm8150: Add apps shared nodes") Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1641749107-31979-2-git-send-email-quic_mkshah@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: broadcom: bcm4908: use proper TWD bindingRafał Miłecki1-4/+4
[ Upstream commit 33826e9c6ba76b265d4e26cb95493fa27ed78974 ] Block at <ff800400 0x4c> is a TWD that contains timers, watchdog and reset. Actual timers happen to be at block beginning but they only span across the first 0x28 registers. It means the old block description was incorrect (size 0x3c). Drop timers binding for now and use documented TWD binding. Timers should be properly documented and defined as TWD subnode. Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: qcom: sm8250: fix PCIe bindings to follow schemaDmitry Baryshkov1-6/+6
[ Upstream commit d60507200485bc778bf6a5556271d784ab09d913 ] Replace (unused) enable-gpio binding with schema-defined wake-gpios. The GPIO line is still unused, but at least we'd follow the defined schema. While we are at it, change perst-gpio property to follow the preferred naming schema (perst-gpios). Fixes: 13e948a36db7 ("arm64: dts: qcom: sm8250: Commonize PCIe pins") Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211214231448.2044987-1-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: qcom: sdm845: fix microphone bias properties and valuesDavid Heidelberg1-4/+4
[ Upstream commit 625c24460dbbc3b6c9a148c0a30f0830893fc909 ] replace millivolt with correct microvolt and adjust value to the minimal value allowed by documentation. Found with `make qcom/sdm845-oneplus-fajita.dtb`. Fixes: arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-microvolt' is a required property From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias2-microvolt' is a required property From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias3-microvolt' is a required property From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias4-microvolt' is a required property From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-millivolt', 'qcom,micbias2-millivolt', 'qcom,micbias3-millivolt', 'qcom,micbias4-millivolt' do not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+' Fixes: 27ca1de07dc3 ("arm64: dts: qcom: sdm845: add slimbus nodes") Signed-off-by: David Heidelberg <david@ixit.cz> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213195105.114596-1-david@ixit.cz Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: prevent instrumentation of bp hardening callbacksMark Rutland2-4/+8
[ Upstream commit 614c0b9fee711dd89b1dd65c88ba83612a373fdc ] We may call arm64_apply_bp_hardening() early during entry (e.g. in el0_ia()) before it is safe to run instrumented code. Unfortunately this may result in running instrumented code in two cases: * The hardening callbacks called by arm64_apply_bp_hardening() are not marked as `noinstr`, and have been observed to be instrumented when compiled with either GCC or LLVM. * Since arm64_apply_bp_hardening() itself is only marked as `inline` rather than `__always_inline`, it is possible that the compiler decides to place it out-of-line, whereupon it may be instrumented. For example, with defconfig built with clang 13.0.0, call_hvc_arch_workaround_1() is compiled as: | <call_hvc_arch_workaround_1>: | d503233f paciasp | f81f0ffe str x30, [sp, #-16]! | 320183e0 mov w0, #0x80008000 | d503201f nop | d4000002 hvc #0x0 | f84107fe ldr x30, [sp], #16 | d50323bf autiasp | d65f03c0 ret ... but when CONFIG_FTRACE=y and CONFIG_KCOV=y this is compiled as: | <call_hvc_arch_workaround_1>: | d503245f bti c | d503201f nop | d503201f nop | d503233f paciasp | a9bf7bfd stp x29, x30, [sp, #-16]! | 910003fd mov x29, sp | 94000000 bl 0 <__sanitizer_cov_trace_pc> | 320183e0 mov w0, #0x80008000 | d503201f nop | d4000002 hvc #0x0 | a8c17bfd ldp x29, x30, [sp], #16 | d50323bf autiasp | d65f03c0 ret ... with a patchable function entry registered with ftrace, and a direct call to __sanitizer_cov_trace_pc(). Neither of these are safe early during entry sequences. This patch avoids the unsafe instrumentation by marking arm64_apply_bp_hardening() as `__always_inline` and by marking the hardening functions as `noinstr`. This avoids the potential for instrumentation, and causes clang to consistently generate the function as with the defconfig sample. Note: in the defconfig compilation, when CONFIG_SVE=y, x30 is spilled to the stack without being placed in a frame record, which will result in a missing entry if call_hvc_arch_workaround_1() is backtraced. Similar is true of qcom_link_stack_sanitisation(), where inline asm spills the LR to a GPR prior to corrupting it. This is not a significant issue presently as we will only backtrace here if an exception is taken, and in such cases we may omit entries for other reasons today. The relevant hardening functions were introduced in commits: ec82b567a74fbdff ("arm64: Implement branch predictor hardening for Falkor") b092201e00206141 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support") ... and these were subsequently moved in commit: d4647f0a2ad71110 ("arm64: Rewrite Spectre-v2 mitigation code") The arm64_apply_bp_hardening() function was introduced in commit: 0f15adbb2861ce6f ("arm64: Add skeleton to harden the branch predictor against aliasing attacks") ... and was subsequently moved and reworked in commit: 6279017e807708a0 ("KVM: arm64: Move BP hardening helpers into spectre.h") Fixes: ec82b567a74fbdff ("arm64: Implement branch predictor hardening for Falkor") Fixes: b092201e00206141 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support") Fixes: d4647f0a2ad71110 ("arm64: Rewrite Spectre-v2 mitigation code") Fixes: 0f15adbb2861ce6f ("arm64: Add skeleton to harden the branch predictor against aliasing attacks") Fixes: 6279017e807708a0 ("KVM: arm64: Move BP hardening helpers into spectre.h") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220224181028.512873-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64/mm: avoid fixmap race condition when create pud mappingJianyong Wu1-0/+9
[ Upstream commit ee017ee353506fcec58e481673e4331ff198a80e ] The 'fixmap' is a global resource and is used recursively by create pud mapping(), leading to a potential race condition in the presence of a concurrent call to alloc_init_pud(): kernel_init thread virtio-mem workqueue thread ================== =========================== alloc_init_pud(...) alloc_init_pud(...) pudp = pud_set_fixmap_offset(...) pudp = pud_set_fixmap_offset(...) READ_ONCE(*pudp) pud_clear_fixmap(...) READ_ONCE(*pudp) // CRASH! As kernel may sleep during creating pud mapping, introduce a mutex lock to serialise use of the fixmap entries by alloc_init_pud(). However, there is no need for locking in early boot stage and it doesn't work well with KASLR enabled when early boot. So, enable lock when system_state doesn't equal to "SYSTEM_BOOTING". Signed-off-by: Jianyong Wu <jianyong.wu@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: f4710445458c ("arm64: mm: use fixmap when creating page tables") Link: https://lore.kernel.org/r/20220201114400.56885-1-jianyong.wu@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08arm64: dts: ti: k3-am64: Fix gic-v3 compatible regsNishanth Menon2-1/+5
commit de60edf1be3d42d4a1b303b41c7c53b2f865726e upstream. Though GIC ARE option is disabled for no GIC-v2 compatibility, Cortex-A53 is free to implement the CPU interface as long as it communicates with the GIC using the stream protocol. This requires that the SoC integration mark out the PERIPHBASE[1] as reserved area within the SoC. See longer discussion in [2] for further information. Update the GIC register map to indicate offsets from PERIPHBASE based on [3]. Without doing this, systems like kvm will not function with gic-v2 emulation. [1] https://developer.arm.com/documentation/ddi0500/e/system-control/aarch64-register-descriptions/configuration-base-address-register--el1 [2] https://lore.kernel.org/all/87k0e0tirw.wl-maz@kernel.org/ [3] https://developer.arm.com/documentation/ddi0500/e/generic-interrupt-controller-cpu-interface/gic-programmers-model/memory-map Cc: stable@vger.kernel.org Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220215201008.15235-5-nm@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08arm64: dts: ti: k3-j7200: Fix gic-v3 compatible regsNishanth Menon2-1/+5
commit 1a307cc299430dd7139d351a3b8941f493dfa885 upstream. Though GIC ARE option is disabled for no GIC-v2 compatibility, Cortex-A72 is free to implement the CPU interface as long as it communicates with the GIC using the stream protocol. This requires that the SoC integration mark out the PERIPHBASE[1] as reserved area within the SoC. See longer discussion in [2] for further information. Update the GIC register map to indicate offsets from PERIPHBASE based on [3]. Without doing this, systems like kvm will not function with gic-v2 emulation. [1] https://developer.arm.com/documentation/100095/0002/system-control/aarch64-register-descriptions/configuration-base-address-register--el1 [2] https://lore.kernel.org/all/87k0e0tirw.wl-maz@kernel.org/ [3] https://developer.arm.com/documentation/100095/0002/way1382452674438 Cc: stable@vger.kernel.org Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220215201008.15235-4-nm@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08arm64: dts: ti: k3-j721e: Fix gic-v3 compatible regsNishanth Menon2-1/+5
commit a06ed27f3bc63ab9e10007dc0118d910908eb045 upstream. Though GIC ARE option is disabled for no GIC-v2 compatibility, Cortex-A72 is free to implement the CPU interface as long as it communicates with the GIC using the stream protocol. This requires that the SoC integration mark out the PERIPHBASE[1] as reserved area within the SoC. See longer discussion in [2] for further information. Update the GIC register map to indicate offsets from PERIPHBASE based on [3]. Without doing this, systems like kvm will not function with gic-v2 emulation. [1] https://developer.arm.com/documentation/100095/0002/system-control/aarch64-register-descriptions/configuration-base-address-register--el1 [2] https://lore.kernel.org/all/87k0e0tirw.wl-maz@kernel.org/ [3] https://developer.arm.com/documentation/100095/0002/way1382452674438 Cc: stable@vger.kernel.org # 5.10+ Fixes: 2d87061e70de ("arm64: dts: ti: Add Support for J721E SoC") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220215201008.15235-3-nm@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08arm64: dts: ti: k3-am65: Fix gic-v3 compatible regsNishanth Menon2-1/+5
commit 8cae268b70f387ff9e697ccd62fb2384079124e7 upstream. Though GIC ARE option is disabled for no GIC-v2 compatibility, Cortex-A53 is free to implement the CPU interface as long as it communicates with the GIC using the stream protocol. This requires that the SoC integration mark out the PERIPHBASE[1] as reserved area within the SoC. See longer discussion in [2] for further information. Update the GIC register map to indicate offsets from PERIPHBASE based on [3]. Without doing this, systems like kvm will not function with gic-v2 emulation. [1] https://developer.arm.com/documentation/ddi0500/e/system-control/aarch64-register-descriptions/configuration-base-address-register--el1 [2] https://lore.kernel.org/all/87k0e0tirw.wl-maz@kernel.org/ [3] https://developer.arm.com/documentation/ddi0500/e/generic-interrupt-controller-cpu-interface/gic-programmers-model/memory-map Cc: stable@vger.kernel.org # 5.10+ Fixes: ea47eed33a3f ("arm64: dts: ti: Add Support for AM654 SoC") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220215201008.15235-2-nm@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08arm64: dts: qcom: sm8250: Fix MSI IRQ for PCIe1 and PCIe2Manivannan Sadhasivam1-2/+2
commit 1b7101e8124b450f2d6a35591e9cbb478c143ace upstream. Fix the MSI IRQ used for PCIe instances 1 and 2. Cc: stable@vger.kernel.org Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support") Reported-by: Jordan Crouse <jordan@cosmicpenguin.net> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220112035556.5108-1-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zonesVijay Balakrishna2-5/+63
commit 031495635b4668f94e964e037ca93d0d38bfde58 upstream. The following patches resulted in deferring crash kernel reservation to mem_init(), mainly aimed at platforms with DMA memory zones (no IOMMU), in particular Raspberry Pi 4. commit 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32") commit 8424ecdde7df ("arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges") commit 0a30c53573b0 ("arm64: mm: Move reserve_crashkernel() into mem_init()") commit 2687275a5843 ("arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required") Above changes introduced boot slowdown due to linear map creation for all the memory banks with NO_BLOCK_MAPPINGS, see discussion[1]. The proposed changes restore crash kernel reservation to earlier behavior thus avoids slow boot, particularly for platforms with IOMMU (no DMA memory zones). Tested changes to confirm no ~150ms boot slowdown on our SoC with IOMMU and 8GB memory. Also tested with ZONE_DMA and/or ZONE_DMA32 configs to confirm no regression to deferring scheme of crash kernel memory reservation. In both cases successfully collected kernel crash dump. [1] https://lore.kernel.org/all/9436d033-579b-55fa-9b00-6f4b661c2dd7@linux.microsoft.com/ Signed-off-by: Vijay Balakrishna <vijayb@linux.microsoft.com> Cc: stable@vger.kernel.org Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Link: https://lore.kernel.org/r/1646242689-20744-1-git-send-email-vijayb@linux.microsoft.com [will: Add #ifdef CONFIG_KEXEC_CORE guards to fix 'crashk_res' references in allnoconfig build] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08arm64: signal: nofpsimd: Do not allocate fp/simd context when not availableDavid Engraf1-4/+6
commit 0a32c88ddb9af30e8a16d41d7b9b824c27d29459 upstream. Commit 6d502b6ba1b2 ("arm64: signal: nofpsimd: Handle fp/simd context for signal frames") introduced saving the fp/simd context for signal handling only when support is available. But setup_sigframe_layout() always reserves memory for fp/simd context. The additional memory is not touched because preserve_fpsimd_context() is not called and thus the magic is invalid. This may lead to an error when parse_user_sigframe() checks the fp/simd area and does not find a valid magic number. Signed-off-by: David Engraf <david.engraf@sysgo.com> Reviwed-by: Mark Brown <broonie@kernel.org> Fixes: 6d502b6ba1b267b3 ("arm64: signal: nofpsimd: Handle fp/simd context for signal frames") Cc: <stable@vger.kernel.org> # 5.6.x Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220225104008.820289-1-david.engraf@sysgo.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-23arm64: fix clang warning about TRAMP_VALIASArnd Bergmann1-2/+2
[ Upstream commit 7f34b43e07cb512b28543fdcb9f35d1fbfda9ebc ] The newly introduced TRAMP_VALIAS definition causes a build warning with clang-14: arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic] return (char *)TRAMP_VALIAS + SZ_2K * slot; Change the addition to something clang does not complain about. Fixes: bd09128d16fa ("arm64: Add percpu vectors for EL1") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: James Morse <james.morse@arm.com> Link: https://lore.kernel.org/r/20220316183833.1563139-1-arnd@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-19arm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg"Dinh Nguyen1-2/+2
[ Upstream commit 268a491aebc25e6dc7c618903b09ac3a2e8af530 ] The DWC2 USB controller on the Agilex platform does not support clock gating, so use the chip specific "intel,socfpga-agilex-hsotg" compatible. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-19arm64: dts: rockchip: reorder rk3399 hdmi clocksSascha Hauer1-3/+3
[ Upstream commit 2e8a8b5955a000cc655f7e368670518cbb77fe58 ] The binding specifies the clock order to "cec", "grf", "vpll". Reorder the clocks accordingly. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220126145549.617165-19-s.hauer@pengutronix.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-19arm64: dts: rockchip: align pl330 node name with dtschemaKrzysztof Kozlowski2-2/+2
[ Upstream commit 8fd9415042826c7609c588e5ef45f3e84237785f ] Fixes dtbs_check warnings like: dmac@ff240000: $nodename:0: 'dmac@ff240000' does not match '^dma-controller(@.*)?$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220129175429.298836-1-krzysztof.kozlowski@canonical.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-19arm64: dts: rockchip: fix rk3399-puma eMMC HS400 signal integrityJakob Unterwurzacher1-0/+6
[ Upstream commit 62966cbdda8a92f82d966a45aa671e788b2006f7 ] There are signal integrity issues running the eMMC at 200MHz on Puma RK3399-Q7. Similar to the work-around found for RK3399 Gru boards, lowering the frequency to 100MHz made the eMMC much more stable, so let's lower the frequency to 100MHz. It might be possible to run at 150MHz as on RK3399 Gru boards but only 100MHz was extensively tested. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20220119134948.1444965-1-quentin.schulz@theobroma-systems.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-19arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG modeQuentin Schulz2-0/+15
[ Upstream commit ed2c66a95c0c5669880aa93d0d34c6e9694b4cbd ] The micro USB3.0 port available on the Haikou evaluation kit for Puma RK3399-Q7 SoM supports dual-role model (aka drd or OTG) but its support was broken until now because of missing logic around the ID pin. This adds proper support for USB OTG on Puma Haikou by "connecting" the GPIO used for USB ID to the USB3 controller device. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20220120125156.16217-1-quentin.schulz@theobroma-systems.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16arm64: kasan: fix include error in MTE functionsPaul Semel1-0/+1
commit b859ebedd1e730bbda69142fca87af4e712649a1 upstream. Fix `error: expected string literal in 'asm'`. This happens when compiling an ebpf object file that includes `net/net_namespace.h` from linux kernel headers. Include trace: include/net/net_namespace.h:10 include/linux/workqueue.h:9 include/linux/timer.h:8 include/linux/debugobjects.h:6 include/linux/spinlock.h:90 include/linux/workqueue.h:9 arch/arm64/include/asm/spinlock.h:9 arch/arm64/include/generated/asm/qrwlock.h:1 include/asm-generic/qrwlock.h:14 arch/arm64/include/asm/processor.h:33 arch/arm64/include/asm/kasan.h:9 arch/arm64/include/asm/mte-kasan.h:45 arch/arm64/include/asm/mte-def.h:14 Signed-off-by: Paul Semel <paul.semel@datadoghq.com> Fixes: 2cb34276427a ("arm64: kasan: simplify and inline MTE functions") Cc: <stable@vger.kernel.org> # 5.12.x Link: https://lore.kernel.org/r/bacb5387-2992-97e4-0c48-1ed925905bee@gmail.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16arm64: Ensure execute-only permissions are not allowed without EPANCatalin Marinas4-17/+19
commit 6e2edd6371a497a6350bb735534c9bda2a31f43d upstream. Commit 18107f8a2df6 ("arm64: Support execute-only permissions with Enhanced PAN") re-introduced execute-only permissions when EPAN is available. When EPAN is not available, arch_filter_pgprot() is supposed to change a PAGE_EXECONLY permission into PAGE_READONLY_EXEC. However, if BTI or MTE are present, such check does not detect the execute-only pgprot in the presence of PTE_GP (BTI) or MT_NORMAL_TAGGED (MTE), allowing the user to request PROT_EXEC with PROT_BTI or PROT_MTE. Remove the arch_filter_pgprot() function, change the default VM_EXEC permissions to PAGE_READONLY_EXEC and update the protection_map[] array at core_initcall() if EPAN is detected. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 18107f8a2df6 ("arm64: Support execute-only permissions with Enhanced PAN") Cc: <stable@vger.kernel.org> # 5.13.x Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0Pali Rohár2-2/+7
commit a1cc1697bb56cdf880ad4d17b79a39ef2c294bc9 upstream. Legacy and old PCI I/O based cards do not support 32-bit I/O addressing. Since commit 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property") kernel can set different PCIe address on CPU and different on the bus for the one A37xx address mapping without any firmware support in case the bus address does not conflict with other A37xx mapping. So remap I/O space to the bus address 0x0 to enable support for old legacy I/O port based cards which have hardcoded I/O ports in low address space. Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O space can be set to address 0x0 too because MEM space and I/O space are separate and so do not conflict. Remapping IO space on Turris Mox to different address is not possible to due bootloader bug. Signed-off-by: Pali Rohár <pali@kernel.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700") Cc: stable@vger.kernel.org # 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property") Cc: stable@vger.kernel.org # 514ef1e62d65 ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space") Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16arm64: dts: armada-3720-turris-mox: Add missing ethernet0 aliasPali Rohár1-0/+1
[ Upstream commit a0e897d1b36793fe0ab899f2fe93dff25c82f418 ] U-Boot uses ethernet* aliases for setting MAC addresses. Therefore define also alias for ethernet0. Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16arm64: dts: qcom: sm8350: Correct UFS symbol clocksBjorn Andersson1-5/+23
[ Upstream commit 0fd4dcb607ce29110d6c0b481a98c4ff3d300551 ] The introduction of '9a61f813fcc8 ("clk: qcom: regmap-mux: fix parent clock lookup")' broke UFS support on SM8350. The cause for this is that the symbol clocks have a specified rate in the "freq-table-hz" table in the UFS node, which causes the UFS code to request a rate change, for which the "bi_tcxo" happens to provide the closest rate. Prior to the change in regmap-mux it was determined (incorrectly) that no change was needed and everything worked. The rates of 75 and 300MHz matches the documentation for the symbol clocks, but we don't represent the parent clocks today. So let's mimic the configuration found in other platforms, by omitting the rate for the symbol clocks as well to avoid the rate change. While at it also fill in the dummy symbol clocks that was dropped from the GCC driver as it was upstreamed. Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211222162058.3418902-1-bjorn.andersson@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16arm64: dts: qcom: sm8350: Describe GCC dependency clocksKonrad Dybcio1-2/+24
[ Upstream commit 9ea9eb36b3c046fc48e737db4de69f7acd12f9be ] Add all the clock names that the GCC driver expects to get via DT, so that the clock handles can be filled as the development progresses. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211114012755.112226-8-konrad.dybcio@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-11arm64: Do not include __READ_ONCE() block in assembly filesNathan Chancellor1-2/+2
commit 52c9f93a9c482251cb0d224faa602ba26d462be8 upstream. When building arm64 defconfig + CONFIG_LTO_CLANG_{FULL,THIN}=y after commit 558c303c9734 ("arm64: Mitigate spectre style branch history side channels"), the following error occurs: <instantiation>:4:2: error: invalid fixup for movz/movk instruction mov w0, #ARM_SMCCC_ARCH_WORKAROUND_3 ^ Marc figured out that moving "#include <linux/init.h>" in include/linux/arm-smccc.h into a !__ASSEMBLY__ block resolves it. The full include chain with CONFIG_LTO=y from include/linux/arm-smccc.h: include/linux/init.h include/linux/compiler.h arch/arm64/include/asm/rwonce.h arch/arm64/include/asm/alternative-macros.h arch/arm64/include/asm/assembler.h The asm/alternative-macros.h include in asm/rwonce.h only happens when CONFIG_LTO is set, which ultimately casues asm/assembler.h to be included before the definition of ARM_SMCCC_ARCH_WORKAROUND_3. As a result, the preprocessor does not expand ARM_SMCCC_ARCH_WORKAROUND_3 in __mitigate_spectre_bhb_fw, which results in the error above. Avoid this problem by just avoiding the CONFIG_LTO=y __READ_ONCE() block in asm/rwonce.h with assembly files, as nothing in that block is useful to assembly files, which allows ARM_SMCCC_ARCH_WORKAROUND_3 to be properly expanded with CONFIG_LTO=y builds. Fixes: e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y") Cc: <stable@vger.kernel.org> # 5.11.x Link: https://lore.kernel.org/r/20220309155716.3988480-1-maz@kernel.org/ Reported-by: Marc Zyngier <maz@kernel.org> Acked-by: James Morse <james.morse@arm.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20220309191633.2307110-1-nathan@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-11arm64: proton-pack: Include unprivileged eBPF status in Spectre v2 ↵James Morse1-0/+26
mitigation reporting commit 58c9a5060cb7cd529d49c93954cdafe81c1d642a upstream. The mitigations for Spectre-BHB are only applied when an exception is taken from user-space. The mitigation status is reported via the spectre_v2 sysfs vulnerabilities file. When unprivileged eBPF is enabled the mitigation in the exception vectors can be avoided by an eBPF program. When unprivileged eBPF is enabled, print a warning and report vulnerable via the sysfs vulnerabilities file. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-11arm64: Use the clearbhb instruction in mitigationsJames Morse10-0/+79
commit 228a26b912287934789023b4132ba76065d9491c upstream. Future CPUs may implement a clearbhb instruction that is sufficient to mitigate SpectreBHB. CPUs that implement this instruction, but not CSV2.3 must be affected by Spectre-BHB. Add support to use this instruction as the BHB mitigation on CPUs that support it. The instruction is in the hint space, so it will be treated by a NOP as older CPUs. Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-11KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migratedJames Morse3-1/+34
commit a5905d6af492ee6a4a2205f0d550b3f931b03d03 upstream. KVM allows the guest to discover whether the ARCH_WORKAROUND SMCCC are implemented, and to preserve that state during migration through its firmware register interface. Add the necessary boiler plate for SMCCC_ARCH_WORKAROUND_3. Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-11arm64: Mitigate spectre style branch history side channelsJames Morse12-2/+352
commit 558c303c9734af5a813739cd284879227f7297d2 upstream. Speculation attacks against some high-performance processors can make use of branch history to influence future speculation. When taking an exception from user-space, a sequence of branches or a firmware call overwrites or invalidates the branch history. The sequence of branches is added to the vectors, and should appear before the first indirect branch. For systems using KPTI the sequence is added to the kpti trampoline where it has a free register as the exit from the trampoline is via a 'ret'. For systems not using KPTI, the same register tricks are used to free up a register in the vectors. For the firmware call, arch-workaround-3 clobbers 4 registers, so there is no choice but to save them to the EL1 stack. This only happens for entry from EL0, so if we take an exception due to the stack access, it will not become re-entrant. For KVM, the existing branch-predictor-hardening vectors are used. When a spectre version of these vectors is in use, the firmware call is sufficient to mitigate against Spectre-BHB. For the non-spectre versions, the sequence of branches is added to the indirect vector. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-03 01:44:12 +0300