summaryrefslogtreecommitdiff
path: root/arch/s390
AgeCommit message (Collapse)AuthorFilesLines
2022-03-08s390/extable: fix exception table sortingHeiko Carstens1-2/+7
commit c194dad21025dfd043210912653baab823bdff67 upstream. s390 has a swap_ex_entry_fixup function, however it is not being used since common code expects a swap_ex_entry_fixup define. If it is not defined the default implementation will be used. So fix this by adding a proper define. However also the implementation of the function must be fixed, since a NULL value for handler has a special meaning and must not be adjusted. Luckily all of this doesn't fix a real bug currently: the main extable is correctly sorted during build time, and for runtime sorting there is currently no case where the handler field is not NULL. Fixes: 05a68e892e89 ("s390/kernel: expand exception table logic to allow new handling options") Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08mm: defer kmemleak object creation of module_alloc()Kefeng Wang1-2/+3
[ Upstream commit 60115fa54ad7b913b7cb5844e6b7ffeb842d55f2 ] Yongqiang reports a kmemleak panic when module insmod/rmmod with KASAN enabled(without KASAN_VMALLOC) on x86[1]. When the module area allocates memory, it's kmemleak_object is created successfully, but the KASAN shadow memory of module allocation is not ready, so when kmemleak scan the module's pointer, it will panic due to no shadow memory with KASAN check. module_alloc __vmalloc_node_range kmemleak_vmalloc kmemleak_scan update_checksum kasan_module_alloc kmemleak_ignore Note, there is no problem if KASAN_VMALLOC enabled, the modules area entire shadow memory is preallocated. Thus, the bug only exits on ARCH which supports dynamic allocation of module area per module load, for now, only x86/arm64/s390 are involved. Add a VM_DEFER_KMEMLEAK flags, defer vmalloc'ed object register of kmemleak in module_alloc() to fix this issue. [1] https://lore.kernel.org/all/6d41e2b9-4692-5ec4-b1cd-cbe29ae89739@huawei.com/ [wangkefeng.wang@huawei.com: fix build] Link: https://lkml.kernel.org/r/20211125080307.27225-1-wangkefeng.wang@huawei.com [akpm@linux-foundation.org: simplify ifdefs, per Andrey] Link: https://lkml.kernel.org/r/CA+fCnZcnwJHUQq34VuRxpdoY6_XbJCDJ-jopksS5Eia4PijPzw@mail.gmail.com Link: https://lkml.kernel.org/r/20211124142034.192078-1-wangkefeng.wang@huawei.com Fixes: 793213a82de4 ("s390/kasan: dynamic shadow mem allocation for modules") Fixes: 39d114ddc682 ("arm64: add KASAN support") Fixes: bebf56a1b176 ("kasan: enable instrumentation of global variables") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reported-by: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08KVM: s390: Ensure kvm_arch_no_poll() is read once when blocking vCPUSean Christopherson1-1/+1
[ Upstream commit 6f390916c4fb359507d9ac4bf1b28a4f8abee5c0 ] Wrap s390's halt_poll_max_steal with READ_ONCE and snapshot the result of kvm_arch_no_poll() in kvm_vcpu_block() to avoid a mostly-theoretical, largely benign bug on s390 where the result of kvm_arch_no_poll() could change due to userspace modifying halt_poll_max_steal while the vCPU is blocking. The bug is largely benign as it will either cause KVM to skip updating halt-polling times (no_poll toggles false=>true) or to update halt-polling times with a slightly flawed block_ns. Note, READ_ONCE is unnecessary in the current code, add it in case the arch hook is ever inlined, and to provide a hint that userspace can change the param at will. Fixes: 8b905d28ee17 ("KVM: s390: provide kvm_arch_no_poll function") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-11KVM: s390: Return error on SIDA memop on normal guestJanis Schoetterl-Glausch1-0/+2
commit 2c212e1baedcd782b2535a3f86bc491977677c0e upstream. Refuse SIDA memops on guests which are not protected. For normal guests, the secure instruction data address designation, which determines the location we access, is not under control of KVM. Fixes: 19e122776886 (KVM: S390: protvirt: Introduce instruction data area bounce buffer) Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01s390/nmi: handle vector validity failures for KVM guestsChristian Borntraeger1-1/+8
commit f094a39c6ba168f2df1edfd1731cca377af5f442 upstream. The machine check validity bit tells about the context. If a KVM guest was running the bit tells about the guest validity and the host state is not affected. As a guest can disable the guest validity this might result in unwanted host errors on machine checks. Cc: stable@vger.kernel.org Fixes: c929500d7a5a ("s390/nmi: s390: New low level handling for machine check happening in guest") Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01s390/nmi: handle guarded storage validity failures for KVM guestsChristian Borntraeger1-4/+14
commit 1ea1d6a847d2b1d17fefd9196664b95f052a0775 upstream. machine check validity bits reflect the state of the machine check. If a guest does not make use of guarded storage, the validity bit might be off. We can not use the host CR bit to decide if the validity bit must be on. So ignore "invalid" guarded storage controls for KVM guests in the host and rely on the machine check being forwarded to the guest. If no other errors happen from a host perspective everything is fine and no process must be killed and the host can continue to run. Cc: stable@vger.kernel.org Fixes: c929500d7a5a ("s390/nmi: s390: New low level handling for machine check happening in guest") Reported-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Tested-by: Carsten Otte <cotte@de.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01s390/hypfs: include z/VM guests with access control group setVasily Gorbik1-2/+4
commit 663d34c8df98740f1e90241e78e456d00b3c6cad upstream. Currently if z/VM guest is allowed to retrieve hypervisor performance data globally for all guests (privilege class B) the query is formed in a way to include all guests but the group name is left empty. This leads to that z/VM guests which have access control group set not being included in the results (even local vm). Change the query group identifier from empty to "any" to retrieve information about all guests from any groups (or without a group set). Cc: stable@vger.kernel.org Fixes: 31cb4bd31a48 ("[S390] Hypervisor filesystem (s390_hypfs) for z/VM") Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01s390/module: fix loading modules with a lot of relocationsIlya Leoshkevich1-19/+18
commit f3b7e73b2c6619884351a3a0a7468642f852b8a2 upstream. If the size of the PLT entries generated by apply_rela() exceeds 64KiB, the first ones can no longer reach __jump_r1 with brc. Fix by using brcl. An alternative solution is to add a __jump_r1 copy after every 64KiB, however, the space savings are quite small and do not justify the additional complexity. Fixes: f19fbd5ed642 ("s390: introduce execute-trampolines for branches") Cc: stable@vger.kernel.org Reported-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27s390/mm: fix 2KB pgtable release raceAlexander Gordeev1-1/+3
commit c2c224932fd0ee6854d6ebfc8d059c2bcad86606 upstream. There is a race on concurrent 2KB-pgtables release paths when both upper and lower halves of the containing parent page are freed, one via page_table_free_rcu() + __tlb_remove_table(), and the other via page_table_free(). The race might lead to a corruption as result of remove of list item in page_table_free() concurrently with __free_page() in __tlb_remove_table(). Let's assume first the lower and next the upper 2KB-pgtables are freed from a page. Since both halves of the page are allocated the tracking byte (bits 24-31 of the page _refcount) has value of 0x03 initially: CPU0 CPU1 ---- ---- page_table_free_rcu() // lower half { // _refcount[31..24] == 0x03 ... atomic_xor_bits(&page->_refcount, 0x11U << (0 + 24)); // _refcount[31..24] <= 0x12 ... table = table | (1U << 0); tlb_remove_table(tlb, table); } ... __tlb_remove_table() { // _refcount[31..24] == 0x12 mask = _table & 3; // mask <= 0x01 ... page_table_free() // upper half { // _refcount[31..24] == 0x12 ... atomic_xor_bits( &page->_refcount, 1U << (1 + 24)); // _refcount[31..24] <= 0x10 // mask <= 0x10 ... atomic_xor_bits(&page->_refcount, mask << (4 + 24)); // _refcount[31..24] <= 0x00 // mask <= 0x00 ... if (mask != 0) // == false break; fallthrough; ... if (mask & 3) // == false ... else __free_page(page); list_del(&page->lru); ^^^^^^^^^^^^^^^^^^ RACE! ^^^^^^^^^^^^^^^^^^^^^ } ... } The problem is page_table_free() releases the page as result of lower nibble unset and __tlb_remove_table() observing zero too early. With this update page_table_free() will use the similar logic as page_table_free_rcu() + __tlb_remove_table(), and mark the fragment as pending for removal in the upper nibble until after the list_del(). In other words, the parent page is considered as unreferenced and safe to release only when the lower nibble is cleared already and unsetting a bit in upper nibble results in that nibble turned zero. Cc: stable@vger.kernel.org Suggested-by: Vlastimil Babka <vbabka@suse.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-20KVM: s390: Clarify SIGP orders versus STOP/RESTARTEric Farman4-2/+43
commit 812de04661c4daa7ac385c0dfd62594540538034 upstream. With KVM_CAP_S390_USER_SIGP, there are only five Signal Processor orders (CONDITIONAL EMERGENCY SIGNAL, EMERGENCY SIGNAL, EXTERNAL CALL, SENSE, and SENSE RUNNING STATUS) which are intended for frequent use and thus are processed in-kernel. The remainder are sent to userspace with the KVM_CAP_S390_USER_SIGP capability. Of those, three orders (RESTART, STOP, and STOP AND STORE STATUS) have the potential to inject work back into the kernel, and thus are asynchronous. Let's look for those pending IRQs when processing one of the in-kernel SIGP orders, and return BUSY (CC2) if one is in process. This is in agreement with the Principles of Operation, which states that only one order can be "active" on a CPU at a time. Cc: stable@vger.kernel.org Suggested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20211213210550.856213-2-farman@linux.ibm.com [borntraeger@linux.ibm.com: add stable tag] Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-16s390/kexec: handle R_390_PLT32DBL rela in arch_kexec_apply_relocations_add()Alexander Egorenkov1-0/+4
commit abf0e8e4ef25478a4390115e6a953d589d1f9ffd upstream. Starting with gcc 11.3, the C compiler will generate PLT-relative function calls even if they are local and do not require it. Later on during linking, the linker will replace all PLT-relative calls to local functions with PC-relative ones. Unfortunately, the purgatory code of kexec/kdump is not being linked as a regular executable or shared library would have been, and therefore, all PLT-relative addresses remain in the generated purgatory object code unresolved. This leads to the situation where the purgatory code is being executed during kdump with all PLT-relative addresses unresolved. And this results in endless loops within the purgatory code. Furthermore, the clang C compiler has always behaved like described above and this commit should fix kdump for kernels built with the latter. Because the purgatory code is no regular executable or shared library, contains only calls to local functions and has no PLT, all R_390_PLT32DBL relocation entries can be resolved just like a R_390_PC32DBL one. * https://refspecs.linuxfoundation.org/ELF/zSeries/lzsabi0_zSeries/x1633.html#AEN1699 Relocation entries of purgatory code generated with gcc 11.3 ------------------------------------------------------------ $ readelf -r linux/arch/s390/purgatory/purgatory.o Relocation section '.rela.text' at offset 0x370 contains 5 entries: Offset Info Type Sym. Value Sym. Name + Addend 00000000005c 000c00000013 R_390_PC32DBL 0000000000000000 purgatory_sha_regions + 2 00000000007a 000d00000014 R_390_PLT32DBL 0000000000000000 sha256_update + 2 00000000008c 000e00000014 R_390_PLT32DBL 0000000000000000 sha256_final + 2 000000000092 000800000013 R_390_PC32DBL 0000000000000000 .LC0 + 2 0000000000a0 000f00000014 R_390_PLT32DBL 0000000000000000 memcmp + 2 Relocation entries of purgatory code generated with gcc 11.2 ------------------------------------------------------------ $ readelf -r linux/arch/s390/purgatory/purgatory.o Relocation section '.rela.text' at offset 0x368 contains 5 entries: Offset Info Type Sym. Value Sym. Name + Addend 00000000005c 000c00000013 R_390_PC32DBL 0000000000000000 purgatory_sha_regions + 2 00000000007a 000d00000013 R_390_PC32DBL 0000000000000000 sha256_update + 2 00000000008c 000e00000013 R_390_PC32DBL 0000000000000000 sha256_final + 2 000000000092 000800000013 R_390_PC32DBL 0000000000000000 .LC0 + 2 0000000000a0 000f00000013 R_390_PC32DBL 0000000000000000 memcmp + 2 Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reported-by: Tao Liu <ltao@redhat.com> Suggested-by: Philipp Rudo <prudo@redhat.com> Reviewed-by: Philipp Rudo <prudo@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211209073817.82196-1-egorenar@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22s390/kexec_file: fix error handling when applying relocationsPhilipp Rudo1-1/+6
[ Upstream commit 41967a37b8eedfee15b81406a9f3015be90d3980 ] arch_kexec_apply_relocations_add currently ignores all errors returned by arch_kexec_do_relocs. This means that every unknown relocation is silently skipped causing unpredictable behavior while the relocated code runs. Fix this by checking for errors and fail kexec_file_load if an unknown relocation type is encountered. The problem was found after gcc changed its behavior and used R_390_PLT32DBL relocations for brasl instruction and relied on ld to resolve the relocations in the final link in case direct calls are possible. As the purgatory code is only linked partially (option -r) ld didn't resolve the relocations leaving them for arch_kexec_do_relocs. But arch_kexec_do_relocs doesn't know how to handle R_390_PLT32DBL relocations so they were silently skipped. This ultimately caused an endless loop in the purgatory as the brasl instructions kept branching to itself. Fixes: 71406883fd35 ("s390/kexec_file: Add kexec_file_load system call") Reported-by: Tao Liu <ltao@redhat.com> Signed-off-by: Philipp Rudo <prudo@redhat.com> Link: https://lore.kernel.org/r/20211208130741.5821-3-prudo@redhat.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22s390/entry: fix duplicate tracking of irq nesting levelSven Schnelle1-4/+5
commit c9b12b59e2ea4c3c7cedec7efb071b649652f3a9 upstream. In the current code, when exiting from idle, rcu_irq_enter() is called twice during irq entry: irq_entry_enter()-> rcu_irq_enter() irq_enter() -> rcu_irq_enter() This may lead to wrong results from rcu_is_cpu_rrupt_from_idle() because of a wrong dynticks nmi nesting count. Fix this by only calling irq_enter_rcu(). Cc: <stable@vger.kernel.org> # 5.12+ Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 56e62a737028 ("s390: convert to generic entry") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17s390/test_unwind: use raw opcode instead of invalid instructionIlie Halip1-2/+3
[ Upstream commit 53ae7230918154d1f4281d7aa3aae9650436eadf ] Building with clang & LLVM_IAS=1 leads to an error: arch/s390/lib/test_unwind.c:179:4: error: invalid register pair " mvcl %%r1,%%r1\n" ^ The test creates an invalid instruction that would trap at runtime, but the LLVM inline assembler tries to validate it at compile time too. Use the raw instruction opcode instead. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Ilie Halip <ilie.halip@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1421 Link: https://lore.kernel.org/r/20211117174822.3632412-1-ilie.halip@gmail.com Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [hca@linux.ibm.com: use illegal opcode, and update comment] Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08s390/pci: move pseudo-MMIO to prevent MIO overlapNiklas Schnelle1-3/+4
commit 52d04d408185b7aa47628d2339c28ec70074e0ae upstream. When running without MIO support, with pci=nomio or for devices which are not MIO-capable the zPCI subsystem generates pseudo-MMIO addresses to allow access to PCI BARs via MMIO based Linux APIs even though the platform uses function handles and BAR numbers. This is done by stashing an index into our global IOMAP array which contains the function handle in the 16 most significant bits of the addresses returned by ioremap() always setting the most significant bit. On the other hand the MIO addresses assigned by the platform for use, while requiring special instructions, allow PCI access with virtually mapped physical addresses. Now the problem is that these MIO addresses and our own pseudo-MMIO addresses may overlap, while functionally this would not be a problem by itself this overlap is detected by common code as both address types are added as resources in the iomem_resource tree. This leads to the overlapping resource claim of either the MIO capable or non-MIO capable devices with being rejected. Since PCI is tightly coupled to the use of the iomem_resource tree, see for example the code for request_mem_region(), we can't reasonably get rid of the overlap being detected by keeping our pseudo-MMIO addresses out of the iomem_resource tree. Instead let's move the range used by our own pseudo-MMIO addresses by starting at (1UL << 62) and only using addresses below (1UL << 63) thus avoiding the range currently used for MIO addresses. Fixes: c7ff0e918a7c ("s390/pci: deal with devices that have no support for MIO instructions") Cc: stable@vger.kernel.org # 5.3+ Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08s390/setup: avoid using memblock_enforce_memory_limitVasily Gorbik1-3/+0
[ Upstream commit 5dbc4cb4667457b0c53bcd7bff11500b3c362975 ] There is a difference in how architectures treat "mem=" option. For some that is an amount of online memory, for s390 and x86 this is the limiting max address. Some memblock api like memblock_enforce_memory_limit() take limit argument and explicitly treat it as the size of online memory, and use __find_max_addr to convert it to an actual max address. Current s390 usage: memblock_enforce_memory_limit(memblock_end_of_DRAM()); yields different results depending on presence of memory holes (offline memory blocks in between online memory). If there are no memory holes limit == max_addr in memblock_enforce_memory_limit() and it does trim online memory and reserved memory regions. With memory holes present it actually does nothing. Since we already use memblock_remove() explicitly to trim online memory regions to potential limit (think mem=, kdump, addressing limits, etc.) drop the usage of memblock_enforce_memory_limit() altogether. Trimming reserved regions should not be required, since we now use memblock_set_current_limit() to limit allocations and any explicit memory reservations above the limit is an actual problem we should not hide. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25signal: Replace force_fatal_sig with force_exit_sig when in doubtEric W. Biederman1-1/+1
commit fcb116bc43c8c37c052530ead79872f8b2615711 upstream. Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Add force_exit_sig and use it instead of force_fatal_sig where historically the code has directly called do_exit. This has the implementation benefits of going through the signal exit path (including generating core dumps) without the danger of allowing userspace to ignore or change these signals. This avoids userspace regressions as older kernels exited with do_exit which debuggers also can not intercept. In the future is should be possible to improve the quality of implementation of the kernel by changing some of these force_exit_sig calls to force_fatal_sig. That can be done where it matters on a case-by-case basis with careful analysis. Reported-by: Kyle Huey <me@kylehuey.com> Reported-by: kernel test robot <oliver.sang@intel.com> [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <khuey@kylehuey.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Backlund <tmb@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)Eric W. Biederman1-1/+1
commit e21294a7aaae32c5d7154b187113a04db5852e37 upstream. Now that force_fatal_sig exists it is unnecessary and a bit confusing to use force_sigsegv in cases where the simpler force_fatal_sig is wanted. So change every instance we can to make the code clearer. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Link: https://lkml.kernel.org/r/877de7jrev.fsf@disp2133 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Backlund <tmb@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25signal/s390: Use force_sigsegv in default_trap_handlerEric W. Biederman1-1/+1
commit 9bc508cf0791c8e5a37696de1a046d746fcbd9d8 upstream. Reading the history it is unclear why default_trap_handler calls do_exit. It is not even menthioned in the commit where the change happened. My best guess is that because it is unknown why the exception happened it was desired to guarantee the process never returned to userspace. Using do_exit(SIGSEGV) has the problem that it will only terminate one thread of a process, leaving the process in an undefined state. Use force_sigsegv(SIGSEGV) instead which effectively has the same behavior except that is uses the ordinary signal mechanism and terminates all threads of a process and is generally well defined. Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: linux-s390@vger.kernel.org Fixes: ca2ab03237ec ("[PATCH] s390: core changes") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lkml.kernel.org/r/20211020174406.17889-11-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Thomas Backlund <tmb@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25s390/dump: fix copying to user-space of swapped kdump oldmemAlexander Egorenkov1-2/+2
commit 3b90954419d4c05651de9cce6d7632bcf6977678 upstream. This commit fixes a bug introduced by commit e9e7870f90e3 ("s390/dump: introduce boot data 'oldmem_data'"). OLDMEM_BASE was mistakenly replaced by oldmem_data.size instead of oldmem_data.start. This bug caused the following error during kdump: kdump.sh[878]: No program header covering vaddr 0x3434f5245found kexec bug? Fixes: e9e7870f90e3 ("s390/dump: introduce boot data 'oldmem_data'") Cc: stable@vger.kernel.org # 5.15+ Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25s390/kexec: fix memory leak of ipl report bufferBaoquan He2-0/+16
commit 4aa9340584e37debef06fa99b56d064beb723891 upstream. unreferenced object 0x38000195000 (size 4096): comm "kexec", pid 8548, jiffies 4294953647 (age 32443.270s) hex dump (first 32 bytes): 00 00 00 c8 20 00 00 00 00 00 00 c0 02 80 00 00 .... ........... 40 40 40 40 40 40 40 40 00 00 00 00 00 00 00 00 @@@@@@@@........ backtrace: [<0000000011a2f199>] __vmalloc_node_range+0xc0/0x140 [<0000000081fa2752>] vzalloc+0x5a/0x70 [<0000000063a4c92d>] ipl_report_finish+0x2c/0x180 [<00000000553304da>] kexec_file_add_ipl_report+0xf4/0x150 [<00000000862d033f>] kexec_file_add_components+0x124/0x160 [<000000000d2717bb>] arch_kexec_kernel_image_load+0x62/0x90 [<000000002e0373b6>] kimage_file_alloc_init+0x1aa/0x2e0 [<0000000060f2d14f>] __do_sys_kexec_file_load+0x17c/0x2c0 [<000000008c86fe5a>] __s390x_sys_kexec_file_load+0x40/0x50 [<000000001fdb9dac>] __do_syscall+0x1bc/0x1f0 [<000000003ee4258d>] system_call+0x78/0xa0 Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Philipp Rudo <prudo@redhat.com> Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel") Cc: <stable@vger.kernel.org> # v5.2: 20c76e242e70: s390/kexec: fix return code handling Cc: <stable@vger.kernel.org> # v5.2 Link: https://lore.kernel.org/r/20211116033101.GD21646@MiWiFi-R3L-srv Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25s390/vdso: filter out -mstack-guard and -mstack-sizeSven Schnelle2-6/+9
commit 00b55eaf45549ce26424224d069a091c7e5d8bac upstream. When CONFIG_VMAP_STACK is disabled, the user can enable CONFIG_STACK_CHECK, which adds a stack overflow check to each C function in the kernel. This is also done for functions in the vdso page. These functions are run in user context and user stack sizes are usually different to what the kernel uses. This might trigger the stack check although the stack size is valid. Therefore filter the -mstack-guard and -mstack-size flags when compiling vdso C files. Cc: stable@kernel.org # 5.10+ Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO") Reported-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25s390/boot: simplify and fix kernel memory layout setupVasily Gorbik2-58/+32
commit 9a39abb7c9aab50eec4ac4421e9ee7f3de013d24 upstream. Initial KASAN shadow memory range was picked to preserve original kernel modules area position. With protected execution support, which might impose addressing limitation on vmalloc area and hence affect modules area position, current fixed KASAN shadow memory range is only making kernel memory layout setup more complex. So move it to the very end of available virtual space and simplify calculations. At the same time return to previous kernel address space split. In particular commit 0c4f2623b957 ("s390: setup kernel memory layout early") introduced precise identity map size calculation and keeping vmemmap left most starting from a fresh region table entry. This didn't take into account additional mapping region requirement for potential DCSS mapping above available physical memory. So go back to virtual space split between 1:1 mapping & vmemmap array once vmalloc area size is subtracted. Cc: stable@vger.kernel.org Fixes: 0c4f2623b957 ("s390: setup kernel memory layout early") Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25s390/setup: avoid reserving memory above identity mappingVasily Gorbik1-9/+1
commit 420f48f636b98fd685f44a3acc4c0a7c0840910d upstream. Such reserved memory region, if not cleaned up later causes problems when memblock_free_all() is called to release free pages to the buddy allocator and those reserved regions are carried over to reserve_bootmem_region() which marks the pages as PageReserved. Instead use memblock_set_current_limit() to make sure memblock allocations do not go over identity mapping (which could happen when "mem=" option is used or during kdump). Cc: stable@vger.kernel.org Fixes: 73045a08cf55 ("s390: unify identity mapping limits handling") Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25s390/kexec: fix return code handlingHeiko Carstens2-2/+9
[ Upstream commit 20c76e242e7025bd355619ba67beb243ba1a1e95 ] kexec_file_add_ipl_report ignores that ipl_report_finish may fail and can return an error pointer instead of a valid pointer. Fix this and simplify by returning NULL in case of an error and let the only caller handle this case. Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel") Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18s390/cpumf: cpum_cf PMU displays invalid value after hotplug removeThomas Richter1-1/+3
commit 9d48c7afedf91a02d03295837ec76b2fb5e7d3fe upstream. When a CPU is hotplugged while the perf stat -e cycles command is running, a wrong (very large) value is displayed immediately after the CPU removal: Check the values, shouldn't be too high as in time counts unit events 1.001101919 29261846 cycles 2.002454499 17523405 cycles 3.003659292 24361161 cycles 4.004816983 18446744073638406144 cycles 5.005671647 <not counted> cycles ... The CPU hotplug off took place after 3 seconds. The issue is the read of the event count value after 4 seconds when the CPU is not available and the read of the counter returns an error. This is treated as a counter value of zero. This results in a very large value (0 - previous_value). Fix this by detecting the hotplugged off CPU and report 0 instead of a very large number. Cc: stable@vger.kernel.org Fixes: a029a4eab39e ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility") Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18KVM: s390: Fix handle_sske page fault handlingJanis Schoetterl-Glausch1-0/+2
[ Upstream commit 85f517b29418158d3e6e90c3f0fc01b306d2f1a1 ] If handle_sske cannot set the storage key, because there is no page table entry or no present large page entry, it calls fixup_user_fault. However, currently, if the call succeeds, handle_sske returns -EAGAIN, without having set the storage key. Instead, retry by continue'ing the loop without incrementing the address. The same issue in handle_pfmf was fixed by a11bdb1a6b78 ("KVM: s390: Fix pfmf and conditional skey emulation"). Fixes: bd096f644319 ("KVM: s390: Add skey emulation fault handling") Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20211022152648.26536-1-scgl@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vmClaudio Imbrenda1-1/+1
[ Upstream commit 1e2aa46de526a5adafe580bca4c25856bb06f09e ] When the system is heavily overcommitted, kvm_s390_pv_init_vm might generate stall notifications. Fix this by using uv_call_sched instead of just uv_call. This is ok because we are not holding spinlocks. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Fixes: 214d9bbcd3a672 ("s390/mm: provide memory management functions for protected KVM guests") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Message-Id: <20210920132502.36111-4-imbrenda@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18KVM: s390: pv: avoid double free of sida pageClaudio Imbrenda1-10/+9
[ Upstream commit d4074324b07a94a1fca476d452dfbb3a4e7bf656 ] If kvm_s390_pv_destroy_cpu is called more than once, we risk calling free_page on a random page, since the sidad field is aliased with the gbea, which is not guaranteed to be zero. This can happen, for example, if userspace calls the KVM_PV_DISABLE IOCTL, and it fails, and then userspace calls the same IOCTL again. This scenario is only possible if KVM has some serious bug or if the hardware is broken. The solution is to simply return successfully immediately if the vCPU was already non secure. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Fixes: 19e1227768863a1469797c13ef8fea1af7beac2c ("KVM: S390: protvirt: Introduce instruction data area bounce buffer") Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20210920132502.36111-3-imbrenda@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18s390/uv: fully validate the VMA before calling follow_page()David Hildenbrand1-1/+1
[ Upstream commit 46c22ffd2772201662350bc7b94b9ea9d3ee5ac2 ] We should not walk/touch page tables outside of VMA boundaries when holding only the mmap sem in read mode. Evil user space can modify the VMA layout just before this function runs and e.g., trigger races with page table removal code since commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap"). find_vma() does not check if the address is >= the VMA start address; use vma_lookup() instead. Fixes: 214d9bbcd3a6 ("s390/mm: provide memory management functions for protected KVM guests") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Link: https://lore.kernel.org/r/20210909162248.14969-6-david@redhat.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18s390/mm: fix VMA and page table handling code in storage key handling functionsDavid Hildenbrand1-18/+39
[ Upstream commit 949f5c1244ee6c36d2e81c588d1200eaa83a3df6 ] There are multiple things broken about our storage key handling functions: 1. We should not walk/touch page tables outside of VMA boundaries when holding only the mmap sem in read mode. Evil user space can modify the VMA layout just before this function runs and e.g., trigger races with page table removal code since commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap"). gfn_to_hva() will only translate using KVM memory regions, but won't validate the VMA. 2. We should not allocate page tables outside of VMA boundaries: if evil user space decides to map hugetlbfs to these ranges, bad things will happen because we suddenly have PTE or PMD page tables where we shouldn't have them. 3. We don't handle large PUDs that might suddenly appeared inside our page table hierarchy. Don't manually allocate page tables, properly validate that we have VMA and bail out on pud_large(). All callers of page table handling functions, except get_guest_storage_key(), call fixup_user_fault() in case they receive an -EFAULT and retry; this will allocate the necessary page tables if required. To keep get_guest_storage_key() working as expected and not requiring kvm_s390_get_skeys() to call fixup_user_fault() distinguish between "there is simply no page table or huge page yet and the key is assumed to be 0" and "this is a fault to be reported". Although commit 637ff9efe5ea ("s390/mm: Add huge pmd storage key handling") introduced most of the affected code, it was actually already broken before when using get_locked_pte() without any VMA checks. Note: Ever since commit 637ff9efe5ea ("s390/mm: Add huge pmd storage key handling") we can no longer set a guest storage key (for example from QEMU during VM live migration) without actually resolving a fault. Although we would have created most page tables, we would choke on the !pmd_present(), requiring a call to fixup_user_fault(). I would have thought that this is problematic in combination with postcopy life migration ... but nobody noticed and this patch doesn't change the situation. So maybe it's just fine. Fixes: 9fcf93b5de06 ("KVM: S390: Create helper function get_guest_storage_key") Fixes: 24d5dd0208ed ("s390/kvm: Provide function for setting the guest storage key") Fixes: a7e19ab55ffd ("KVM: s390: handle missing storage-key facility") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20210909162248.14969-5-david@redhat.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18s390/mm: validate VMA in PGSTE manipulation functionsDavid Hildenbrand1-0/+13
[ Upstream commit fe3d10024073f06f04c74b9674bd71ccc1d787cf ] We should not walk/touch page tables outside of VMA boundaries when holding only the mmap sem in read mode. Evil user space can modify the VMA layout just before this function runs and e.g., trigger races with page table removal code since commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap"). gfn_to_hva() will only translate using KVM memory regions, but won't validate the VMA. Further, we should not allocate page tables outside of VMA boundaries: if evil user space decides to map hugetlbfs to these ranges, bad things will happen because we suddenly have PTE or PMD page tables where we shouldn't have them. Similarly, we have to check if we suddenly find a hugetlbfs VMA, before calling get_locked_pte(). Fixes: 2d42f9477320 ("s390/kvm: Add PGSTE manipulation functions") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20210909162248.14969-4-david@redhat.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18s390/gmap: don't unconditionally call pte_unmap_unlock() in __gmap_zap()David Hildenbrand1-2/+3
[ Upstream commit b159f94c86b43cf7e73e654bc527255b1f4eafc4 ] ... otherwise we will try unlocking a spinlock that was never locked via a garbage pointer. At the time we reach this code path, we usually successfully looked up a PGSTE already; however, evil user space could have manipulated the VMA layout in the meantime and triggered removal of the page table. Fixes: 1e133ab296f3 ("s390/mm: split arch/s390/mm/pgtable.c") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20210909162248.14969-3-david@redhat.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18s390/gmap: validate VMA in __gmap_zap()David Hildenbrand1-0/+6
[ Upstream commit 2d8fb8f3914b40e3cc12f8cbb74daefd5245349d ] We should not walk/touch page tables outside of VMA boundaries when holding only the mmap sem in read mode. Evil user space can modify the VMA layout just before this function runs and e.g., trigger races with page table removal code since commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap"). The pure prescence in our guest_to_host radix tree does not imply that there is a VMA. Further, we should not allocate page tables (via get_locked_pte()) outside of VMA boundaries: if evil user space decides to map hugetlbfs to these ranges, bad things will happen because we suddenly have PTE or PMD page tables where we shouldn't have them. Similarly, we have to check if we suddenly find a hugetlbfs VMA, before calling get_locked_pte(). Note that gmap_discard() is different: zap_page_range()->unmap_single_vma() makes sure to stay within VMA boundaries. Fixes: b31288fa83b2 ("s390/kvm: support collaborative memory management") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20210909162248.14969-2-david@redhat.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-2/+4
Pull kvm fixes from Paolo Bonzini: - Fixes for s390 interrupt delivery - Fixes for Xen emulator bugs showing up as debug kernel WARNs - Fix another issue with SEV/ES string I/O VMGEXITs * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Take srcu lock in post_kvm_run_save() KVM: SEV-ES: fix another issue with string I/O VMGEXITs KVM: x86/xen: Fix kvm_xen_has_interrupt() sleeping in kvm_vcpu_block() KVM: x86: switch pvclock_gtod_sync_lock to a raw spinlock KVM: s390: preserve deliverable_mask in __airqs_kick_single_vcpu KVM: s390: clear kicked_mask before sleeping again
2021-10-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-1/+15
Pull kvm fixes from Paolo Bonzini: "Tools: - kvm_stat: do not show halt_wait_ns since it is not a cumulative statistic x86: - clean ups and fixes for bus lock vmexit and lazy allocation of rmaps - two fixes for SEV-ES (one more coming as soon as I get reviews) - fix for static_key underflow ARM: - Properly refcount pages used as a concatenated stage-2 PGD - Fix missing unlock when detecting the use of MTE+VM_SHARED" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SEV-ES: reduce ghcb_sa_len to 32 bits KVM: VMX: Remove redundant handling of bus lock vmexit KVM: kvm_stat: do not show halt_wait_ns KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unload Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET" KVM: SEV-ES: Set guest_state_protected after VMSA update KVM: X86: fix lazy allocation of rmaps KVM: SEV-ES: fix length of string I/O KVM: arm64: Release mmap_lock when using VM_SHARED with MTE KVM: arm64: Report corrupted refcount at EL2 KVM: arm64: Fix host stage-2 PGD refcount KVM: s390: Function documentation fixes
2021-10-20KVM: s390: preserve deliverable_mask in __airqs_kick_single_vcpuHalil Pasic1-2/+3
Changing the deliverable mask in __airqs_kick_single_vcpu() is a bug. If one idle vcpu can't take the interrupts we want to deliver, we should look for another vcpu that can, instead of saying that we don't want to deliver these interrupts by clearing the bits from the deliverable_mask. Fixes: 9f30f6216378 ("KVM: s390: add gib_alert_irq_handler()") Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20211019175401.3757927-3-pasic@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-10-20KVM: s390: clear kicked_mask before sleeping againHalil Pasic1-0/+1
The idea behind kicked mask is that we should not re-kick a vcpu that is already in the "kick" process, i.e. that was kicked and is is about to be dispatched if certain conditions are met. The problem with the current implementation is, that it assumes the kicked vcpu is going to enter SIE shortly. But under certain circumstances, the vcpu we just kicked will be deemed non-runnable and will remain in wait state. This can happen, if the interrupt(s) this vcpu got kicked to deal with got already cleared (because the interrupts got delivered to another vcpu). In this case kvm_arch_vcpu_runnable() would return false, and the vcpu would remain in kvm_vcpu_block(), but this time with its kicked_mask bit set. So next time around we wouldn't kick the vcpu form __airqs_kick_single_vcpu(), but would assume that we just kicked it. Let us make sure the kicked_mask is cleared before we give up on re-dispatching the vcpu. Fixes: 9f30f6216378 ("KVM: s390: add gib_alert_irq_handler()") Reported-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20211019175401.3757927-2-pasic@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-10-12s390: fix strrchr() implementationRoberto Sassu1-8/+7
Fix two problems found in the strrchr() implementation for s390 architectures: evaluate empty strings (return the string address instead of NULL, if '\0' is passed as second argument); evaluate the first character of non-empty strings (the current implementation stops at the second). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Heiko Carstens <hca@linux.ibm.com> (incorrect behavior with empty strings) Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Link: https://lore.kernel.org/r/20211005120836.60630-1-roberto.sassu@huawei.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-04s390/pci: fix zpci_zdev_put() on reserveNiklas Schnelle3-7/+44
Since commit 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev") the reference count of a zpci_dev is incremented between pcibios_add_device() and pcibios_release_device() which was supposed to prevent the zpci_dev from being freed while the common PCI code has access to it. It was missed however that the handling of zPCI availability events assumed that once zpci_zdev_put() was called no later availability event would still see the device. With the previously mentioned commit however this assumption no longer holds and we must make sure that we only drop the initial long-lived reference the zPCI subsystem holds exactly once. Do so by introducing a zpci_device_reserved() function that handles when a device is reserved. Here we make sure the zpci_dev will not be considered for further events by removing it from the zpci_list. This also means that the device actually stays in the ZPCI_FN_STATE_RESERVED state between the time we know it has been reserved and the final reference going away. We thus need to consider it a real state instead of just a conceptual state after the removal. The final cleanup of PCI resources, removal from zbus, and destruction of the IOMMU stays in zpci_release_device() to make sure holders of the reference do see valid data until the release. Fixes: 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev") Cc: stable@vger.kernel.org Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-04bpf, s390: Fix potential memory leak about jit_dataTiezhu Yang1-1/+1
Make sure to free jit_data through kfree() in the error path. Fixes: 1c8f9b91c456 ("bpf: s390: add JIT support for multi-function programs") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-09-28KVM: s390: Function documentation fixesJanosch Frank2-1/+15
The latest compile changes pointed us to a few instances where we use the kernel documentation style but don't explain all variables or don't adhere to it 100%. It's easy to fix so let's do that. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-09-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-4/+4
Pull kvm fixes from Paolo Bonzini: "A bit late... I got sidetracked by back-from-vacation routines and conferences. But most of these patches are already a few weeks old and things look more calm on the mailing list than what this pull request would suggest. x86: - missing TLB flush - nested virtualization fixes for SMM (secure boot on nested hypervisor) and other nested SVM fixes - syscall fuzzing fixes - live migration fix for AMD SEV - mirror VMs now work for SEV-ES too - fixes for reset - possible out-of-bounds access in IOAPIC emulation - fix enlightened VMCS on Windows 2022 ARM: - Add missing FORCE target when building the EL2 object - Fix a PMU probe regression on some platforms Generic: - KCSAN fixes selftests: - random fixes, mostly for clang compilation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits) selftests: KVM: Explicitly use movq to read xmm registers selftests: KVM: Call ucall_init when setting up in rseq_test KVM: Remove tlbs_dirty KVM: X86: Synchronize the shadow pagetable before link it KVM: X86: Fix missed remote tlb flush in rmap_write_protect() KVM: x86: nSVM: don't copy virt_ext from vmcb12 KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0 KVM: x86: nSVM: restore int_vector in svm_clear_vintr kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[] KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest state KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smm KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM mode KVM: x86: reset pdptrs_from_userspace when exiting smm KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on SMM exit KVM: nVMX: Filter out all unsupported controls when eVMCS was activated KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs KVM: Clean up benign vcpu->cpu data races when kicking vCPUs ...
2021-09-23Merge tag 'net-5.15-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports() Previous releases - regressions: - introduce a shutdown method to mdio device drivers, and make DSA switch drivers compatible with masters disappearing on shutdown; preventing infinite reference wait - fix issues in mdiobus users related to ->shutdown vs ->remove - virtio-net: fix pages leaking when building skb in big mode - xen-netback: correct success/error reporting for the SKB-with-fraglist - dsa: tear down devlink port regions when tearing down the devlink port on error - nexthop: fix division by zero while replacing a resilient group - hns3: check queue, vf, vlan ids range before using Previous releases - always broken: - napi: fix race against netpoll causing NAPI getting stuck - mlx4_en: ensure link operstate is updated even if link comes up before netdev registration - bnxt_en: fix TX timeout when TX ring size is set to the smallest - enetc: fix illegal access when reading affinity_hint; prevent oops on sysfs access - mtk_eth_soc: avoid creating duplicate offload entries Misc: - core: correct the sock::sk_lock.owned lockdep annotations" * tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) atlantic: Fix issue in the pm resume flow. net/mlx4_en: Don't allow aRFS for encapsulated packets net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries nfc: st-nci: Add SPI ID matching DT compatible MAINTAINERS: remove Guvenc Gulce as net/smc maintainer nexthop: Fix memory leaks in nexthop notification chain listeners mptcp: ensure tx skbs always have the MPTCP ext qed: rdma - don't wait for resources under hw error recovery flow s390/qeth: fix deadlock during failing recovery s390/qeth: Fix deadlock in remove_discipline s390/qeth: fix NULL deref in qeth_clear_working_pool_list() net: dsa: realtek: register the MDIO bus under devres net: dsa: don't allocate the slave_mii_bus using devres Doc: networking: Fox a typo in ice.rst net: dsa: fix dsa_tree_setup error path net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work net/smc: add missing error check in smc_clc_prfx_set() net: hns3: fix a return value error in hclge_get_reset_status() net: hns3: check vlan id before using it ...
2021-09-22KVM: x86: Query vcpu->vcpu_idx directly and drop its accessorSean Christopherson3-4/+4
Read vcpu->vcpu_idx directly instead of bouncing through the one-line wrapper, kvm_vcpu_get_idx(), and drop the wrapper. The wrapper is a remnant of the original implementation and serves no purpose; remove it before it gains more users. Back when kvm_vcpu_get_idx() was added by commit 497d72d80a78 ("KVM: Add kvm_vcpu_get_idx to get vcpu index in kvm->vcpus"), the implementation was more than just a simple wrapper as vcpu->vcpu_idx did not exist and retrieving the index meant walking over the vCPU array to find the given vCPU. When vcpu_idx was introduced by commit 8750e72a79dd ("KVM: remember position in kvm->vcpus array"), the helper was left behind, likely to avoid extra thrash (but even then there were only two users, the original arm usage having been removed at some point in the past). No functional change intended. Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210910183220.2397812-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22s390/qeth: fix deadlock during failing recoveryAlexandra Winter1-1/+1
Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed taking discipline_mutex inside qeth_do_reset(), fixing potential deadlocks. An error path was missed though, that still takes discipline_mutex and thus has the original deadlock potential. Intermittent deadlocks were seen when a qeth channel path is configured offline, causing a race between qeth_do_reset and ccwgroup_remove. Call qeth_set_offline() directly in the qeth_do_reset() error case and then a new variant of ccwgroup_set_offline(), without taking discipline_mutex. Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-21Merge tag 's390-5.15-ebpf-jit-fixes' of ↵Linus Torvalds1-32/+38
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 eBPF fixes from Vasily Gorbik: "Johan Almbladh has implemented a number of new testcases for eBPF [1], which uncovered three miscompilation issues in the s390 eBPF JIT" Link: https://lore.kernel.org/bpf/20210902185229.1840281-1-johan.almbladh@anyfinetworks.com/ [1] * tag 's390-5.15-ebpf-jit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/bpf: Fix optimizing out zero-extensions s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant s390/bpf: Fix branch shortening during codegen pass
2021-09-16s390/bpf: Fix optimizing out zero-extensionsIlya Leoshkevich1-28/+30
Currently the JIT completely removes things like `reg32 += 0`, however, the BPF_ALU semantics requires the target register to be zero-extended in such cases. Fix by optimizing out only the arithmetic operation, but not the subsequent zero-extension. Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-09-16s390/bpf: Fix 64-bit subtraction of the -0x80000000 constantIlya Leoshkevich1-2/+7
The JIT uses agfi for subtracting constants, but -(-0x80000000) cannot be represented as a 32-bit signed binary integer. Fix by using algfi in this particular case. Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-09-16s390/bpf: Fix branch shortening during codegen passIlya Leoshkevich1-2/+1
EMIT6_PCREL() macro assumes that the previous pass generated 6 bytes of code, which is not the case if branch shortening took place. Fix by using jit->prg, like all the other EMIT6_PCREL_*() macros. Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-12 01:23:35 +0300