Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit eed05744322da07dd7e419432dcedf3c2e017179 ]
The sched_clock() can be used very early since commit 857baa87b642
("sched/clock: Enable sched clock early"). In addition, with commit
38669ba205d1 ("x86/xen/time: Output xen sched_clock time from 0"), kdump
kernel in Xen HVM guest may panic at very early stage when accessing
&__this_cpu_read(xen_vcpu)->time as in below:
setup_arch()
-> init_hypervisor_platform()
-> x86_init.hyper.init_platform = xen_hvm_guest_init()
-> xen_hvm_init_time_ops()
-> xen_clocksource_read()
-> src = &__this_cpu_read(xen_vcpu)->time;
This is because Xen HVM supports at most MAX_VIRT_CPUS=32 'vcpu_info'
embedded inside 'shared_info' during early stage until xen_vcpu_setup() is
used to allocate/relocate 'vcpu_info' for boot cpu at arbitrary address.
However, when Xen HVM guest panic on vcpu >= 32, since
xen_vcpu_info_reset(0) would set per_cpu(xen_vcpu, cpu) = NULL when
vcpu >= 32, xen_clocksource_read() on vcpu >= 32 would panic.
This patch calls xen_hvm_init_time_ops() again later in
xen_hvm_smp_prepare_boot_cpu() after the 'vcpu_info' for boot vcpu is
registered when the boot vcpu is >= 32.
This issue can be reproduced on purpose via below command at the guest
side when kdump/kexec is enabled:
"taskset -c 33 echo c > /proc/sysrq-trigger"
The bugfix for PVM is not implemented due to the lack of testing
environment.
[boris: xen_hvm_init_time_ops() returns on errors instead of jumping to end]
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220302164032.14569-3-dongli.zhang@oracle.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8931ddd8d6a55fcefb20f44a38ba42bb746f0b62 ]
Unit node addresses should not have leading 0x:
Warning (unit_address_format): /nemc@13410000/efuse@d0/eth-mac-addr@0x22: unit name should not have leading "0x"
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e85d29ba4b24f68e7a78cb85c55e754362eeb2de ]
DTC issues the following warnings when building xtfpga device trees:
/soc/flash@00000000/partition@0x0: unit name should not have leading "0x"
/soc/flash@00000000/partition@0x6000000: unit name should not have leading "0x"
/soc/flash@00000000/partition@0x6800000: unit name should not have leading "0x"
/soc/flash@00000000/partition@0x7fe0000: unit name should not have leading "0x"
Drop leading 0x from flash partition unit names.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d1f0ec9f71780e69ceb9d91697600c747d6e02e ]
Rewrote the RISC-V memmove() assembly implementation. The
previous implementation did not check memory alignment and it
compared 2 pointers with a signed comparison. The misaligned
memory access would cause the kernel to crash on systems that
did not emulate it in firmware and did not support it in hardware.
Firmware emulation is slow and may not exist. The RISC-V spec
does not guarantee that support for misaligned memory accesses
will exist. It should not be depended on.
This patch now checks for XLEN granularity of co-alignment between
the pointers. Failing that, copying is done by loading from the 2
contiguous and naturally aligned XLEN memory locations containing
the overlapping XLEN sized data to be copied. The data is shifted
into the correct place and binary or'ed together on each
iteration. The result is then stored into the corresponding
naturally aligned XLEN sized location in the destination. For
unaligned data at the terminations of the regions to be copied
or for copies less than (2 * XLEN) in size, byte copy is used.
This patch also now uses unsigned comparison for the pointers and
migrates to the newer assembler annotations from the now deprecated
ones.
Signed-off-by: Michael T. Kloos <michael@michaelkloos.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d601fd24e6964967f115f036a840f4f28488f63f ]
Refcount leak will happen when format_show returns failure in multiple
cases. Unified management of of_node_put can fix this problem.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220302021959.10959-1-hbh25y@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a76e520ee1831a81dabf8a9a58c6453f700026e ]
Since the IBM A2 CPU support was removed, see commit
fb5a515704d7 ("powerpc: Remove platforms/wsp and associated pieces"),
the only 64-bit Book3E CPUs we support are Freescale (NXP) ones.
However our Kconfig still allows configurating a kernel that has 64-bit
Book3E support, but no Freescale CPU support enabled. Such a kernel
would never boot, it doesn't know about any CPUs.
It also causes build errors, as reported by lkp, because
PPC_BARRIER_NOSPEC is not enabled in such a configuration:
powerpc64-linux-ld: arch/powerpc/net/bpf_jit_comp64.o:(.toc+0x0):
undefined reference to `powerpc_security_features'
To fix this, force PPC_FSL_BOOK3E to be selected whenever we are
building a 64-bit Book3E kernel.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220304061222.2478720-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d17b66417308996e7e64b270a3c7f3c1fbd4cfc8 ]
With KCFLAGS="-O3", I was able to trigger a fortify-source
memcpy() overflow panic on set_vi_srs_handler().
Although O3 level is not supported in the mainline, under some
conditions that may've happened with any optimization settings,
it's just a matter of inlining luck. The panic itself is correct,
more precisely, 50/50 false-positive and not at the same time.
From the one side, no real overflow happens. Exception handler
defined in asm just gets copied to some reserved places in the
memory.
But the reason behind is that C code refers to that exception
handler declares it as `char`, i.e. something of 1 byte length.
It's obvious that the asm function itself is way more than 1 byte,
so fortify logics thought we are going to past the symbol declared.
The standard way to refer to asm symbols from C code which is not
supposed to be called from C is to declare them as
`extern const u8[]`. This is fully correct from any point of view,
as any code itself is just a bunch of bytes (including 0 as it is
for syms like _stext/_etext/etc.), and the exact size is not known
at the moment of compilation.
Adjust the type of the except_vec_vi_*() and related variables.
Make set_handler() take `const` as a second argument to avoid
cast-away warnings and give a little more room for optimization.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a0a1436053b17e50b7c88858fb0824326641793 ]
of_node_put(np) needs to be called when pdev == NULL.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b91cee5eadd2021f55e6775f2d50bd56d00c217 ]
Hash faults are not resoved in NMI context, instead causing the access
to fail. This is done because perf interrupts can get backtraces
including walking the user stack, and taking a hash fault on those could
deadlock on the HPTE lock if the perf interrupt hits while the same HPTE
lock is being held by the hash fault code. The user-access for the stack
walking will notice the access failed and deal with that in the perf
code.
The reason to allow perf interrupts in is to better profile hash faults.
The problem with this is any hash fault on a kernel access that happens
in NMI context will crash, because kernel accesses must not fail.
Hard lockups, system reset, machine checks that access vmalloc space
including modules and including stack backtracing and symbol lookup in
modules, per-cpu data, etc could all run into this problem.
Fix this by disallowing perf interrupts in the hash fault code (the
direct hash fault is covered by MSR[EE]=0 so the PMI disable just needs
to extend to the preload case). This simplifies the tricky logic in hash
faults and perf, at the cost of reduced profiling of hash faults.
perf can still latch addresses when interrupts are disabled, it just
won't get the stack trace at that point, so it would still find hot
spots, just sometimes with confusing stack chains.
An alternative could be to allow perf interrupts here but always do the
slowpath stack walk if we are in nmi context, but that slows down all
perf interrupt stack walking on hash though and it does not remove as
much tricky code.
Reported-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204035348.545435-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4c182ecf33584b9b2d1aa9dad073014a504c01f ]
Commit 1f9ad21c3b38 ("powerpc/mm: Implement set_memory() routines")
included a spin_lock() to change_page_attr() in order to
safely perform the three step operations. But then
commit 9f7853d7609d ("powerpc/mm: Fix set_memory_*() against
concurrent accesses") modify it to use pte_update() and do
the operation safely against concurrent access.
In the meantime, Maxime reported some spinlock recursion.
[ 15.351649] BUG: spinlock recursion on CPU#0, kworker/0:2/217
[ 15.357540] lock: init_mm+0x3c/0x420, .magic: dead4ead, .owner: kworker/0:2/217, .owner_cpu: 0
[ 15.366563] CPU: 0 PID: 217 Comm: kworker/0:2 Not tainted 5.15.0+ #523
[ 15.373350] Workqueue: events do_free_init
[ 15.377615] Call Trace:
[ 15.380232] [e4105ac0] [800946a4] do_raw_spin_lock+0xf8/0x120 (unreliable)
[ 15.387340] [e4105ae0] [8001f4ec] change_page_attr+0x40/0x1d4
[ 15.393413] [e4105b10] [801424e0] __apply_to_page_range+0x164/0x310
[ 15.400009] [e4105b60] [80169620] free_pcp_prepare+0x1e4/0x4a0
[ 15.406045] [e4105ba0] [8016c5a0] free_unref_page+0x40/0x2b8
[ 15.411979] [e4105be0] [8018724c] kasan_depopulate_vmalloc_pte+0x6c/0x94
[ 15.418989] [e4105c00] [801424e0] __apply_to_page_range+0x164/0x310
[ 15.425451] [e4105c50] [80187834] kasan_release_vmalloc+0xbc/0x134
[ 15.431898] [e4105c70] [8015f7a8] __purge_vmap_area_lazy+0x4e4/0xdd8
[ 15.438560] [e4105d30] [80160d10] _vm_unmap_aliases.part.0+0x17c/0x24c
[ 15.445283] [e4105d60] [801642d0] __vunmap+0x2f0/0x5c8
[ 15.450684] [e4105db0] [800e32d0] do_free_init+0x68/0x94
[ 15.456181] [e4105dd0] [8005d094] process_one_work+0x4bc/0x7b8
[ 15.462283] [e4105e90] [8005d614] worker_thread+0x284/0x6e8
[ 15.468227] [e4105f00] [8006aaec] kthread+0x1f0/0x210
[ 15.473489] [e4105f40] [80017148] ret_from_kernel_thread+0x14/0x1c
Remove the read / modify / write sequence to make the operation atomic
and remove the spin_lock() in change_page_attr().
To do the operation atomically, we can't use pte modification helpers
anymore. Because all platforms have different combination of bits, it
is not easy to use those bits directly. But all have the
_PAGE_KERNEL_{RO/ROX/RW/RWX} set of flags. All we need it to compare
two sets to know which bits are set or cleared.
For instance, by comparing _PAGE_KERNEL_ROX and _PAGE_KERNEL_RO you
know which bit gets cleared and which bit get set when changing exec
permission.
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/all/20211212112152.GA27070@sakura/
Link: https://lore.kernel.org/r/43c3c76a1175ae6dc1a3d3b5c3f7ecb48f683eea.1640344012.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c5ed82b800d8615cdda00729e7b62e5899f0b13 ]
On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.
The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.
Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.
This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html
Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 17846485dff91acce1ad47b508b633dffc32e838 ]
T1040RDB has two RTL8211E-VB phys which requires setting
of internal delays for correct work.
Changing the phy-connection-type property to `rgmii-id`
will fix this issue.
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a836839cbfe60dc434c5476a7429cf2bae36415d ]
When RDTSCP is supported but RDPID is not supported in host,
RDPID emulation is available. However, __kvm_get_msr() would
only fail when RDTSCP/RDPID both are disabled in guest, so
the emulator wouldn't inject a #UD when RDPID is disabled but
RDTSCP is enabled in guest.
Fixes: fb6d4d340e05 ("KVM: x86: emulate RDPID")
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <1dfd46ae5b76d3ed87bde3154d51c64ea64c99c1.1646226788.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e644896f5106aa3f6d7e8c7adf2e4dc0fce53555 ]
HSW_IN_TX* bits are used in generic code which are not supported on
AMD. Worse, these bits overlap with AMD EventSelect[11:8] and hence
using HSW_IN_TX* bits unconditionally in generic code is resulting in
unintentional pmu behavior on AMD. For example, if EventSelect[11:8]
is 0x2, pmc_reprogram_counter() wrongly assumes that
HSW_IN_TX_CHECKPOINTED is set and thus forces sampling period to be 0.
Also per the SDM, both bits 32 and 33 "may only be set if the processor
supports HLE or RTM" and for "IN_TXCP (bit 33): this bit may only be set
for IA32_PERFEVTSEL2."
Opportunistically eliminate code redundancy, because if the HSW_IN_TX*
bit is set in pmc->eventsel, it is already set in attr.config.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reported-by: Jim Mattson <jmattson@google.com>
Fixes: 103af0a98788 ("perf, kvm: Support the in_tx/in_tx_cp modifiers in KVM arch perfmon emulation v5")
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220309084257.88931-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b026073db2f1ad0e4d8b61c83316c8497981037 ]
AMD EPYC CPUs never raise a #GP for a WRMSR to a PerfEvtSeln MSR. Some
reserved bits are cleared, and some are not. Specifically, on
Zen3/Milan, bits 19 and 42 are not cleared.
When emulating such a WRMSR, KVM should not synthesize a #GP,
regardless of which bits are set. However, undocumented bits should
not be passed through to the hardware MSR. So, rather than checking
for reserved bits and synthesizing a #GP, just clear the reserved
bits.
This may seem pedantic, but since KVM currently does not support the
"Host/Guest Only" bits (41:40), it is necessary to clear these bits
rather than synthesizing #GP, because some popular guests (e.g Linux)
will set the "Host Only" bit even on CPUs that don't support
EFER.SVME, and they don't expect a #GP.
For example,
root@Ubuntu1804:~# perf stat -e r26 -a sleep 1
Performance counter stats for 'system wide':
0 r26
1.001070977 seconds time elapsed
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379957] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000130026) at rIP: 0xffffffff9b276a28 (native_write_msr+0x8/0x30)
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379958] Call Trace:
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379963] amd_pmu_disable_event+0x27/0x90
Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Reported-by: Lotus Fenn <lotusf@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Like Xu <likexu@tencent.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Message-Id: <20220226234131.2167175-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a9e7b9ea252842bc8b14d495706ac6317fafd5d ]
Include kvm_cache_regs.h to pick up the definition of is_guest_mode(),
which is referenced by nested_svm_virtualize_tpr() in svm.h. Remove
include from svm_onhpyerv.c which was done only because of lack of
include in svm.h.
Fixes: 883b0a91f41ab ("KVM: SVM: Move Nested SVM Implementation to nested.c")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220304161032.2270688-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95b065bf5c431c06c68056a03a5853b660640ecc ]
The third nybble of AMD's event select overlaps with Intel's IN_TX and
IN_TXCP bits. Therefore, we can't use AMD64_RAW_EVENT_MASK on Intel
platforms that support TSX.
Declare a raw_event_mask in the kvm_pmu structure, initialize it in
the vendor-specific pmu_refresh() functions, and use that mask for
PERF_TYPE_RAW configurations in reprogram_gp_counter().
Fixes: 710c47651431 ("KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220308012452.3468611-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e3a33af812c611d99756e2ec61e9d7068d466bdf ]
Due to dropped inclusion of asm-generic/xor.h, xor_block_8regs symbol is
missing with CONFIG64 and break compilation, as the asm/xor_64.h also did
not include it. The patch recreate the logic from arch/x86, which check
whether AVX is available and add fallbacks for 32bit and 64bit config of
um.
A very minor additional "fix" is, the return of the macro parameter
instead of NULL, as this is the original intent of the macro, but
this does not change the actual behavior.
Fixes: c0ecca6604b8 ("um: enable the use of optimized xor routines in UML")
Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2a8859f373b0a86f0ece8ec8312607eacf12485d upstream.
FNAME(cmpxchg_gpte) is an inefficient mess. It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.
The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit add6a0cd1c5b ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap(). To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c. But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address. That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly. Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for. But at least it is an efficient mess.
(Thanks to Linus for suggesting improvement on the inline assembly).
Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com
Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Fixes: bd53cb35a3e9 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a3a6a2a035bb6c3a7ef4c788d8fd69a7b2d6284 upstream.
Moving to an EPOLL based IRQ controller broke uml_mconsole stop/go
commands. This fixes it and restores stop/go functionality.
Fixes: ff6a17989c08 ("Epoll based IRQ controller")
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eeeb4f1075d71d67083c75f69247206e9b3d9f4a upstream.
Reorder dmas and dma-names properties for i2c controller node to make it
compliant with bindings.
Fixes: 8126d88162a5 ("arm64: dts: add QorIQ LS1046A SoC support")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
CC: soc@kernel.org
Link: https://lore.kernel.org/r/20220326042313.97862-5-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aa4df840d1c5eab2bb33695efe4409b3e5526749 upstream.
Reorder dmas and dma-names properties for i2c controller node to make it
compliant with bindings.
Fixes: 6d453cd22357 ("arm64: dts: add Freescale LS1043a SoC support")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
CC: soc@kernel.org
Link: https://lore.kernel.org/r/20220326042313.97862-4-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 31d3687d6017c7ce6061695361598d9cda70807a upstream.
Reorder dmas and dma-names property for spi controller node to make it
compliant with bindings.
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220326042313.97862-2-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 583d6b0062640def86f3265aa1042ecb6672516e upstream.
Reorder dma and dma-names property for serial node to make it compliant
with bindings.
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220326042313.97862-3-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8b2360c7157b462c4870d447d1e65d30ef31f9aa upstream.
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from jive_mtdset().
Fixes: 9db829f485c5 ("[ARM] JIVE: Initial machine support for Logitech Jive")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 770093459b9b333380aa71f2c31c60b14895c1df upstream.
Commit 031495635b46 ("arm64: Do not defer reserve_crashkernel() for
platforms with no DMA memory zones") introduced different definitions
for 'arm64_dma_phys_limit' depending on CONFIG_ZONE_DMA{,32} based on
a late suggestion from Pasha. Sadly, this results in a build error when
passing W=1:
| arch/arm64/mm/init.c:90:19: error: conflicting type qualifiers for 'arm64_dma_phys_limit'
Drop the 'const' for now and use '__ro_after_init' consistently.
Link: https://lore.kernel.org/r/202203090241.aj7paWeX-lkp@intel.com
Link: https://lore.kernel.org/r/CA+CK2bDbbx=8R=UthkMesWOST8eJMtOGJdfMRTFSwVmo0Vn0EA@mail.gmail.com
Fixes: 031495635b46 ("arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 60210a3d86dc57ce4a76a366e7841dda746a33f7 upstream.
On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually
inappropriate for .plt, .got, and .got.plt sections which are always
SHT_PROGBITS.
In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway
and (NOLOAD) will be essentially ignored. In ld.lld, since
https://reviews.llvm.org/D118840 ("[ELF] Support (TYPE=<value>) to
customize the output section type"), ld.lld will report a `section type
mismatch` error (later changed to a warning). Just remove (NOLOAD) to
fix the warning.
[1] https://lld.llvm.org/ELF/linker_script.html As of today, "The
section should be marked as not loadable" on
https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is
outdated for ELF.
Link: https://github.com/ClangBuiltLinux/linux/issues/1597
Fixes: ab1ef68e5401 ("RISC-V: Add sections of PLT and GOT for kernel module")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d67412f24cc3a2c05f35f7c856addb07a2960ce upstream.
iop32x is one of the last platforms to use IRQ 0, and this has apparently
stopped working in a 2014 cleanup without anyone noticing. This interrupt
is used for the DMA engine, so most likely this has not actually worked
in the past 7 years, but it's also not essential for using this board.
I'm splitting out this change from my GENERIC_IRQ_MULTI_HANDLER
conversion so it can be backported if anyone cares.
Fixes: a71b092a9c68 ("ARM: Convert handle_IRQ to use __handle_domain_irq")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: take +1 offset into account in mask/unmask and init as well]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c8bd296cca3434b13b28b074eaeb78a23284de77 upstream.
The algorithm __cbc-aes-neonbs requires a fallback so we need
to select the config options for them or otherwise it will fail
to register on boot-up.
Fixes: 00b99ad2bac2 ("crypto: arm/aes-neonbs - Use generic cbc...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a80ced6ea514000d34bf1239d47553de0d1ee89e upstream.
As guest_irq is coming from KVM_IRQFD API call, it may trigger
crash in svm_update_pi_irte() due to out-of-bounds:
crash> bt
PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8"
#0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397
#1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d
#2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d
#3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d
#4 [ffffb1ba6707fb90] no_context at ffffffff856692c9
#5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51
#6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace
[exception RIP: svm_update_pi_irte+227]
RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086
RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001
RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8
RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200
R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm]
#8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm]
#9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm]
RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b
RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020
RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0
R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0
R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0
ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b
Vmx have been fix this in commit 3a8b0677fc61 (KVM: VMX: Do not BUG() on
out-of-bounds guest IRQ), so we can just copy source from that to fix
this.
Co-developed-by: Yi Liu <liu.yi24@zte.com.cn>
Signed-off-by: Yi Liu <liu.yi24@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Message-Id: <20220309113025.44469-1-wang.yi59@zte.com.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c15e0ae42c8e5a61e9aca8aac920517cf7b3e94e upstream.
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes: aaffcfd1e82 ("KVM: X86: Implement PV IPIs in linux guest")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b1e34d325397a33d97d845e312d7cf2a8b646b44 upstream.
Setting non-zero values to SYNIC/STIMER MSRs activates certain features,
this should not happen when KVM_CAP_HYPERV_SYNIC{,2} was not activated.
Note, it would've been better to forbid writing anything to SYNIC/STIMER
MSRs, including zeroes, however, at least QEMU tries clearing
HV_X64_MSR_STIMER0_CONFIG without SynIC. HV_X64_MSR_EOM MSR is somewhat
'special' as writing zero there triggers an action, this also should not
happen when SynIC wasn't activated.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220325132140.25650-4-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kvm_irq_delivery_to_apic_fast()
commit 00b5f37189d24ac3ed46cb7f11742094778c46ce upstream.
When kvm_irq_delivery_to_apic_fast() is called with APIC_DEST_SELF
shorthand, 'src' must not be NULL. Crash the VM with KVM_BUG_ON()
instead of crashing the host.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220325132140.25650-3-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ec37d1cbe17d8189d9562178d8b29167fe1c31a upstream.
When KVM_CAP_HYPERV_SYNIC{,2} is activated, KVM already checks for
irqchip_in_kernel() so normally SynIC irqs should never be set. It is,
however, possible for a misbehaving VMM to write to SYNIC/STIMER MSRs
causing erroneous behavior.
The immediate issue being fixed is that kvm_irq_delivery_to_apic()
(kvm_irq_delivery_to_apic_fast()) crashes when called with
'irq.shorthand = APIC_DEST_SELF' and 'src == NULL'.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220325132140.25650-2-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8667d0d64dd1f84fd41b5897fd87fa9113ae05e3 upstream.
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:1190: Error: unrecognized opcode: `stbcix'
{standard input}:1433: Error: unrecognized opcode: `lwzcix'
{standard input}:1453: Error: unrecognized opcode: `stbcix'
{standard input}:1460: Error: unrecognized opcode: `stwcix'
{standard input}:1596: Error: unrecognized opcode: `stbcix'
...
Rework to add assembler directives [1] around the instruction. Going
through them one by one shows that the changes should be safe. Like
__get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(),
which according to the name is specific to power9. And __raw_rm_read*()
are only called in things that are powernv or book3s_hv specific.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Cc: stable@vger.kernel.org
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Make commit subject more descriptive]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-2-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f222ab83df92acf72691a2021e1f0d99880dcdf1 upstream.
set_memory_attr() was implemented by commit 4d1755b6a762 ("powerpc/mm:
implement set_memory_attr()") because the set_memory_xx() couldn't
be used at that time to modify memory "on the fly" as explained it
the commit.
But set_memory_attr() uses set_pte_at() which leads to warnings when
CONFIG_DEBUG_VM is selected, because set_pte_at() is unexpected for
updating existing page table entries.
The check could be bypassed by using __set_pte_at() instead,
as it was the case before commit c988cfd38e48 ("powerpc/32:
use set_memory_attr()") but since commit 9f7853d7609d ("powerpc/mm:
Fix set_memory_*() against concurrent accesses") it is now possible
to use set_memory_xx() functions to update page table entries
"on the fly" because the update is now atomic.
For DEBUG_PAGEALLOC we need to clear and set back _PAGE_PRESENT.
Add set_memory_np() and set_memory_p() for that.
Replace all uses of set_memory_attr() by the relevant set_memory_xx()
and remove set_memory_attr().
Fixes: c988cfd38e48 ("powerpc/32: use set_memory_attr()")
Cc: stable@vger.kernel.org
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Depends-on: 9f7853d7609d ("powerpc/mm: Fix set_memory_*() against concurrent accesses")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cda2b44b55c96f9ac69fa92e68c01084ec9495c5.1640344012.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8219d31effa7be5dbc7ff915d7970672e028c701 upstream.
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:10576: Error: unrecognized opcode: `stbcx.'
{standard input}:10680: Error: unrecognized opcode: `lharx'
{standard input}:10694: Error: unrecognized opcode: `lbarx'
Rework to add assembler directives [1] around the instruction. The
problem with this might be that we can trick a power6 into
single-stepping through an stbcx. for instance, and it will execute that
in kernel mode.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: stable@vger.kernel.org # v4.14+
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-3-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a633cb1edddaa643fadc70abc88f89a408fa834a upstream.
Looks like there been a copy paste mistake when added the instruction
'stbcx' twice and one was probably meant to be 'sthcx'. Changing to
'sthcx' from 'stbcx'.
Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-1-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd75080aa8409ce10d50fb58981c6b59bf8707d3 upstream.
The shadow's page table is not updated when PTE_RPN_SHIFT is 24
and PAGE_SHIFT is 12. It not only causes false positives but
also false negative as shown the following text.
Fix it by bringing the logic of kasan_early_shadow_page_entry here.
1. False Positive:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50
Write of size 16 at addr f57f3be0 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-12267-gdebe436e77c7 #1
Call Trace:
[c80d1c20] [c07fe7b8] dump_stack_lvl+0x4c/0x6c (unreliable)
[c80d1c40] [c02ff668] print_address_description.constprop.0+0x88/0x300
[c80d1c70] [c02ff45c] kasan_report+0x1ec/0x200
[c80d1cb0] [c0300b20] kasan_check_range+0x160/0x2f0
[c80d1cc0] [c03018a4] memset+0x34/0x90
[c80d1ce0] [c0280108] pcpu_alloc+0x508/0xa50
[c80d1d40] [c02fd7bc] __kmem_cache_create+0xfc/0x570
[c80d1d70] [c0283d64] kmem_cache_create_usercopy+0x274/0x3e0
[c80d1db0] [c2036580] init_sd+0xc4/0x1d0
[c80d1de0] [c00044a0] do_one_initcall+0xc0/0x33c
[c80d1eb0] [c2001624] kernel_init_freeable+0x2c8/0x384
[c80d1ef0] [c0004b14] kernel_init+0x24/0x170
[c80d1f10] [c001b26c] ret_from_kernel_thread+0x5c/0x64
Memory state around the buggy address:
f57f3a80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3b00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>f57f3b80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f57f3c00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3c80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
2. False Negative (with KASAN tests):
==================================================================
Before fix:
ok 45 - kmalloc_double_kzfree
# vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039
KASAN failure expected in "((volatile char *)area)[3100]", but none occurred
not ok 46 - vmalloc_oob
not ok 1 - kasan
==================================================================
After fix:
ok 1 - kasan
Fixes: cbd18991e24fe ("powerpc/mm: Fix an Oops in kasan_mmu_init()")
Cc: stable@vger.kernel.org # 5.4.x
Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211229035226.59159-1-chenjingwen6@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47d3e5cdfe607ec6883eb0faa7acf05b8cb3f92a upstream.
It has been proven on practice that at least Windows Server 2019 tries
using HVCALL_SEND_IPI_EX in 'XMM fast' mode when it has more than 64 vCPUs
and it needs to send an IPI to a vCPU > 63. Similarly to other XMM Fast
hypercalls (HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}{,_EX}), this
information is missing in TLFS as of 6.0b. Currently, KVM returns an error
(HV_STATUS_INVALID_HYPERCALL_INPUT) and Windows crashes.
Note, HVCALL_SEND_IPI is a 'standard' fast hypercall (not 'XMM fast') as
all its parameters fit into RDX:R8 and this is handled by KVM correctly.
Cc: stable@vger.kernel.org # 5.14.x: 3244867af8c0: KVM: x86: Ignore sparse banks size for an "all CPUs", non-sparse IPI req
Cc: stable@vger.kernel.org # 5.14.x
Fixes: d8f5537a8816 ("KVM: hyper-v: Advertise support for fast XMM hypercalls")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220222154642.684285-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
flush hypercalls
commit 7321f47eada53a395fb3086d49297eebb19e8e58 upstream.
When TLB flush hypercalls (HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX are
issued in 'XMM fast' mode, the maximum number of allowed sparse_banks is
not 'HV_HYPERCALL_MAX_XMM_REGISTERS - 1' (5) but twice as many (10) as each
XMM register is 128 bit long and can hold two 64 bit long banks.
Cc: stable@vger.kernel.org # 5.14.x
Fixes: 5974565bc26d ("KVM: x86: kvm_hv_flush_tlb use inputs from XMM registers")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220222154642.684285-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 82c1ead0d678af31e5d883656c12096a0004178b upstream.
'struct kvm_hv_hcall' has all the required information already,
there's no need to pass 'ex' additionally.
No functional change intended.
Cc: stable@vger.kernel.org # 5.14.x
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220222154642.684285-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 50e523dd79f6a856d793ce5711719abe27cffbf2 upstream.
'struct kvm_hv_hcall' has all the required information already,
there's no need to pass 'ex' additionally.
No functional change intended.
Cc: stable@vger.kernel.org # 5.14.x
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220222154642.684285-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3354ef5a592d219364cf442c2f784ce7ad7629fd upstream.
Explicitly check for present SPTEs when clearing dirty bits in the TDP
MMU. This isn't strictly required for correctness, as setting the dirty
bit in a defunct SPTE will not change the SPTE from !PRESENT to PRESENT.
However, the guarded MMU_WARN_ON() in spte_ad_need_write_protect() would
complain if anyone actually turned on KVM's MMU debugging.
Fixes: a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU")
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-3-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d62007edf01f5c11f75d0f4b1e538fc52a5b1982 upstream.
Zap both valid and invalid roots when zapping/unmapping a gfn range, as
KVM must ensure it holds no references to the freed page after returning
from the unmap operation. Most notably, the TDP MMU doesn't zap invalid
roots in mmu_notifier callbacks. This leads to use-after-free and other
issues if the mmu_notifier runs to completion while an invalid root
zapper yields as KVM fails to honor the requirement that there must be
_no_ references to the page after the mmu_notifier returns.
The bug is most easily reproduced by hacking KVM to cause a collision
between set_nx_huge_pages() and kvm_mmu_notifier_release(), but the bug
exists between kvm_mmu_notifier_invalidate_range_start() and memslot
updates as well. Invalidating a root ensures pages aren't accessible by
the guest, and KVM won't read or write page data itself, but KVM will
trigger e.g. kvm_set_pfn_dirty() when zapping SPTEs, and thus completing
a zap of an invalid root _after_ the mmu_notifier returns is fatal.
WARNING: CPU: 24 PID: 1496 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:173 [kvm]
RIP: 0010:kvm_is_zone_device_pfn+0x96/0xa0 [kvm]
Call Trace:
<TASK>
kvm_set_pfn_dirty+0xa8/0xe0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
zap_gfn_range+0x1f3/0x310 [kvm]
kvm_tdp_mmu_zap_invalidated_roots+0x50/0x90 [kvm]
kvm_mmu_zap_all_fast+0x177/0x1a0 [kvm]
set_nx_huge_pages+0xb4/0x190 [kvm]
param_attr_store+0x70/0x100
module_attr_store+0x19/0x30
kernfs_fop_write_iter+0x119/0x1b0
new_sync_write+0x11c/0x1b0
vfs_write+0x1cc/0x270
ksys_write+0x5f/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Fixes: b7cccd397f31 ("KVM: x86/mmu: Fast invalidation for TDP MMU")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211215011557.399940-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 04dc4e6ce274fa729feda32aa957b27388a3870c upstream.
Move the check for an invalid root out of kvm_tdp_mmu_get_root() and into
the one place it actually matters, tdp_mmu_next_root(), as the other user
already has an implicit validity check. A future bug fix will need to
get references to invalid roots to honor mmu_notifier requests; there's
no point in forcing what will be a common path to open code getting a
reference to a root.
No functional change intended.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211215011557.399940-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d6174299365ddbbf491620c0b8c5ca1a6ef2eea5 upstream.
While the guest runs, EFER.LME cannot change unless CR0.PG is clear, and
therefore EFER.NX is the only bit that can affect the MMU role. However,
set_efer accepts a host-initiated change to EFER.LME even with CR0.PG=1.
In that case, the MMU has to be reset.
Fixes: 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes")
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4036b29a146b2749af3bb213b003eb69f3e5ecc4 ]
Make sure in .probe() to set driver data before the function is left to
make it possible in .remove() to undo the actions done.
This fixes a potential memory leak and stops returning an error code in
.remove() that is ignored by the driver core anyhow.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0092c25b541a5422d7e71892a13c55ee91abc34b ]
This patch fixes the tristate configuration for i2c3 function assigned
to the dtf pins on the Tamonten Tegra20 SoM.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 23fc539e81295b14b50c6ccc5baeb4f3d59d822d ]
On some architectures, access_ok() does not do any argument type
checking, so replacing the definition with a generic one causes
a few warnings for harmless issues that were never caught before.
Fix the ones that I found either through my own test builds or
that were reported by the 0-day bot.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|