summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2022-03-02clk: jz4725b: fix mmc0 clock gatingSiarhei Volkau1-2/+1
commit 2f0754f27a230fee6e6d753f07585cee03bedfe3 upstream. The mmc0 clock gate bit was mistakenly assigned to "i2s" clock. You can find that the same bit is assigned to "mmc0" too. It leads to mmc0 hang for a long time after any sound activity also it prevented PM_SLEEP to work properly. I guess it was introduced by copy-paste from jz4740 driver where it is really controls I2S clock gate. Fixes: 226dfa4726eb ("clk: Add Ingenic jz4725b CGU driver") Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Tested-by: Siarhei Volkau <lis8215@gmail.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220205171849.687805-2-lis8215@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27clk: si5341: Fix clock HW provider cleanupRobert Hancock1-1/+1
commit 49a8f2bc8d88702783c7e163ec84374e9a022f71 upstream. The call to of_clk_add_hw_provider was not undone on remove or on probe failure, which could cause an oops on a subsequent attempt to retrieve clocks for the removed device. Switch to the devm version of the function to avoid this issue. Fixes: 3044a860fd09 ("clk: Add Si5341/Si5340 driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220112203816.1784610-1-robert.hancock@calian.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27clk: Emit a stern warning with writable debugfs enabledStephen Boyd1-0/+18
commit 489a71964f9d74e697a12cd0ace20ed829eb1f93 upstream. We don't want vendors to be enabling this part of the clk code and shipping it to customers. Exposing the ability to change clk frequencies and parents via debugfs is potentially damaging to the system if folks don't know what they're doing. Emit a strong warning so that the message is clear: don't enable this outside of development systems. Fixes: 37215da5553e ("clk: Add support for setting clk_rate via debugfs") Cc: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211210014237.2130300-1-sboyd@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBBMartin Blumenstingl1-3/+41
[ Upstream commit ff54938dd190d85f740b9bf9dde59b550936b621 ] There are reports that 48kHz audio does not work on the WeTek Play 2 (which uses a GXBB SoC), while 44.1kHz audio works fine on the same board. There are also reports of 48kHz audio working fine on GXL and GXM SoCs, which are using an (almost) identical AIU (audio controller). Experimenting has shown that MPLL0 is causing this problem. In the .dts we have by default: assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; assigned-clock-rates = <294912000>, <270950400>, <393216000>; The MPLL0 rate is divisible by 48kHz without remainder and the MPLL1 rate is divisible by 44.1kHz without remainder. Swapping these two clock rates "fixes" 48kHz audio but breaks 44.1kHz audio. Everything looks normal when looking at the info provided by the common clock framework while playing 48kHz audio (via I2S with mclk-fs = 256): mpll_prediv 1 1 0 2000000000 mpll0_div 1 1 0 294909641 mpll0 1 1 0 294909641 cts_amclk_sel 1 1 0 294909641 cts_amclk_div 1 1 0 12287902 cts_amclk 1 1 0 12287902 meson-clk-msr however shows that the actual MPLL0 clock is off by more than 38MHz: mp0_out 333322917 +/-10416Hz The rate seen by meson-clk-msr is very close to what we would get when SDM (the fractional part) was ignored: (2000000000Hz * 16384) / ((16384 * 6) = 333.33MHz If SDM was considered the we should get close to: (2000000000Hz * 16384) / ((16384 * 6) + 12808) = 294.9MHz Further experimenting shows that HHI_MPLL_CNTL7[15] does not have any effect on the rate of MPLL0 as seen my meson-clk-msr (regardless of whether that bit is zero or one the rate is always the same according to meson-clk-msr). Using HHI_MPLL_CNTL[25] on the other hand as SDM_EN results in SDM being considered for the rate output by the hardware. The rate - as seen by meson-clk-msr - matches with what we expect when SDM_EN is enabled (fractional part is being considered, resulting in a 294.9MHz output) or disable (fractional part being ignored, resulting in a 333.33MHz output). Reported-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20211031135006.1508796-1-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27clk: bm1880: remove kfrees on static allocationsConor Dooley1-18/+2
[ Upstream commit c861c1be3897845313a0df47804b1db37c7052e1 ] bm1880_clk_unregister_pll & bm1880_clk_unregister_div both try to free statically allocated variables, so remove those kfrees. For example, if we take L703 kfree(div_hw): - div_hw is a bm1880_div_hw_clock pointer - in bm1880_clk_register_plls this is pointed to an element of arg1: struct bm1880_div_hw_clock *clks - in the probe, where bm1880_clk_register_plls is called arg1 is bm1880_div_clks, defined on L371: static struct bm1880_div_hw_clock bm1880_div_clks[] Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Fixes: 1ab4601da55b ("clk: Add common clock driver for BM1880 SoC") Link: https://lore.kernel.org/r/20211223154244.1024062-1-conor.dooley@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27clk: qcom: gcc-sc7280: Mark gcc_cfg_noc_lpass_clk always enabledTaniya Das1-1/+1
[ Upstream commit 9c337073d9d81a145434b22f42dc3128ecd17730 ] The gcc cfg noc lpass clock is required to be always enabled for the LPASS core and audio drivers to be functional. Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280") Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1640018638-19436-4-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system ↵Dillon Min1-4/+0
enter shell [ Upstream commit 6fc058a72f3b7b07fc4de6d66ad1f68951b00f6e ] stm32's clk driver register two ltdc gate clk to clk core by clk_hw_register_gate() and clk_hw_register_composite() first: 'stm32f429_gates[]', clk name is 'ltdc', which no user to use. second: 'stm32f429_aux_clk[]', clk name is 'lcd-tft', used by ltdc driver both of them point to the same offset of stm32's RCC register. after kernel enter console, clk core turn off ltdc's clk as 'stm32f429_gates[]' is no one to use. but, actually 'stm32f429_aux_clk[]' is in use. stm32f469/746/769 have the same issue, fix it. Fixes: daf2d117cbca ("clk: stm32f4: Add lcd-tft clock") Link: https://lore.kernel.org/linux-arm-kernel/1590564453-24499-7-git-send-email-dillon.minfei@gmail.com/ Link: https://lore.kernel.org/lkml/CAPTRvHkf0cK_4ZidM17rPo99gWDmxgqFt4CDUjqFFwkOeQeFDg@mail.gmail.com/ Signed-off-by: Dillon Min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/1635232282-3992-10-git-send-email-dillon.minfei@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27clk: imx8mn: Fix imx8mn_clko1_selsAdam Ford1-3/+3
[ Upstream commit 570727e9acfac1c2330a01dd5e1272e9c3acec08 ] When attempting to use sys_pll1_80m as the parent for clko1, the system hangs. This is due to the fact that the source select for sys_pll1_80m was incorrectly pointing to m7_alt_pll_clk, which doesn't yet exist. According to Rev 3 of the TRM, The imx8mn_clko1_sels also incorrectly references an osc_27m which does not exist, nor does an entry for source select bits 010b. Fix both by inserting a dummy clock into the missing space in the table and renaming the incorrectly name clock with dummy. Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20211117133202.775633-1-aford173@gmail.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27clk: renesas: rzg2l: propagate return value of_genpd_add_provider_simple()Lad Prabhakar1-2/+1
[ Upstream commit 33748744f15a110a233b6ae0380f476006e770f0 ] of_genpd_add_provider_simple() might fail, this patch makes sure we check the return value of of_genpd_add_provider_simple() by propagating the return value to the caller of rzg2l_cpg_add_clk_domain(). Fixes: ef3c613ccd68a ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211117115101.28281-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27clk: renesas: rzg2l: Check return value of pm_genpd_init()Lad Prabhakar1-1/+13
[ Upstream commit 27527a3d3b162e4512798c058c0e8a216c721187 ] Make sure we check the return value of pm_genpd_init() which might fail. Also add a devres action to remove the power-domain in-case the probe callback fails further down in the code flow. Fixes: ef3c613ccd68a ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211117115101.28281-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27clk: bcm-2835: Remove rounding up the dividersMaxime Ripard1-8/+3
[ Upstream commit 8ca011ef4af48a7af7b15afd8a4a44039dd04cea ] The driver, once it found a divider, tries to round it up by increasing the least significant bit of the fractional part by one when the round_up argument is set and there's a remainder. However, since it increases the divider it will actually reduce the clock rate below what we were asking for, leading to issues with clk_set_min_rate() that will complain that our rounded clock rate is below the minimum of the rate. Since the dividers are fairly precise already, let's remove that part so that we can have clk_set_min_rate() working. This is effectively a revert of 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor"). Fixes: 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality Tested-by: Michael Stapelberg <michael@stapelberg.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27clk: bcm-2835: Pick the closest clock rateMaxime Ripard1-1/+1
[ Upstream commit 5517357a4733d7cf7c17fc79d0530cfa47add372 ] The driver currently tries to pick the closest rate that is lower than the rate being requested. This causes an issue with clk_set_min_rate() since it actively checks for the rounded rate to be above the minimum that was just set. Let's change the logic a bit to pick the closest rate to the requested rate, no matter if it's actually higher or lower. Fixes: 6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality Tested-by: Michael Stapelberg <michael@stapelberg.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-2-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22clk: Don't parent clks until the parent is fully registeredMike Tipton1-3/+12
[ Upstream commit 54baf56eaa40aa5cdcd02b3c20d593e4e1211220 ] Before commit fc0c209c147f ("clk: Allow parents to be specified without string names") child clks couldn't find their parent until the parent clk was added to a list in __clk_core_init(). After that commit, child clks can reference their parent clks directly via a clk_hw pointer, or they can lookup that clk_hw pointer via DT if the parent clk is registered with an OF clk provider. The common clk framework treats hw->core being non-NULL as "the clk is registered" per the logic within clk_core_fill_parent_index(): parent = entry->hw->core; /* * We have a direct reference but it isn't registered yet? * Orphan it and let clk_reparent() update the orphan status * when the parent is registered. */ if (!parent) Therefore we need to be extra careful to not set hw->core until the clk is fully registered with the clk framework. Otherwise we can get into a situation where a child finds a parent clk and we move the child clk off the orphan list when the parent isn't actually registered, wrecking our enable accounting and breaking critical clks. Consider the following scenario: CPU0 CPU1 ---- ---- struct clk_hw clkBad; struct clk_hw clkA; clkA.init.parent_hws = { &clkBad }; clk_hw_register(&clkA) clk_hw_register(&clkBad) ... __clk_register() hw->core = core ... __clk_register() __clk_core_init() clk_prepare_lock() __clk_init_parent() clk_core_get_parent_by_index() clk_core_fill_parent_index() if (entry->hw) { parent = entry->hw->core; At this point, 'parent' points to clkBad even though clkBad hasn't been fully registered yet. Ouch! A similar problem can happen if a clk controller registers orphan clks that are referenced in the DT node of another clk controller. Let's fix all this by only setting the hw->core pointer underneath the clk prepare lock in __clk_core_init(). This way we know that clk_core_fill_parent_index() can't see hw->core be non-NULL until the clk is fully registered. Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20211109043438.4639-1-quic_mdtipton@quicinc.com [sboyd@kernel.org: Reword commit text, update comment] Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-17clk: qcom: sm6125-gcc: Swap ops of ice and apps on sdcc1Martin Botka1-2/+2
[ Upstream commit e53f2086856c16ccab80fd0ac012baa1ae88af73 ] Without this change eMMC runs at overclocked freq. Swap the ops to not OC the eMMC. Signed-off-by: Martin Botka <martin.botka@somainline.org> Link: https://lore.kernel.org/r/20211130212015.25232-1-martin.botka@somainline.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: 4b8d6ae57cdf ("clk: qcom: Add SM6125 (TRINKET) GCC driver") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-14clk: qcom: clk-alpha-pll: Don't reconfigure running TrionBjorn Andersson1-0/+9
commit a1f0019c342bd83240b05be68c9888549dde7935 upstream. In the event that the bootloader has configured the Trion PLL as source for the display clocks, e.g. for the continuous splashscreen, then there will also be RCGs that are clocked by this instance. Reconfiguring, and in particular disabling the output of, the PLL will cause issues for these downstream RCGs and has been shown to prevent them from being re-parented. Follow downstream and skip configuration if it's determined that the PLL is already running. Fixes: 59128c20a6a9 ("clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20211123162508.153711-1-bjorn.andersson@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14clk: imx: use module_platform_driverMiles Chen2-2/+2
commit eee377b8f44e7ac4f76bbf2440e5cbbc1d25c25f upstream. Replace builtin_platform_driver_probe with module_platform_driver_probe because CONFIG_CLK_IMX8QXP can be set to =m (kernel module). Fixes: e0d0d4d86c766 ("clk: imx8qxp: Support building i.MX8QXP clock driver as module") Cc: Fabio Estevam <festevam@gmail.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Miles Chen <miles.chen@mediatek.com> Link: https://lore.kernel.org/r/20210904235418.2442-1-miles.chen@mediatek.com Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14clk: qcom: regmap-mux: fix parent clock lookupDmitry Baryshkov3-1/+15
commit 9a61f813fcc8d56d85fcf9ca6119cf2b5ac91dd5 upstream. The function mux_get_parent() uses qcom_find_src_index() to find the parent clock index, which is incorrect: qcom_find_src_index() uses src enum for the lookup, while mux_get_parent() should use cfg field (which corresponds to the register value). Add qcom_find_cfg_index() function doing this kind of lookup and use it for mux parent lookup. Fixes: df964016490b ("clk: qcom: add parent map for regmap mux") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211115233407.1046179-1-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clkDmitry Baryshkov1-15/+0
[ Upstream commit 05cf3ec00d460b50088d421fb878a0f83f57e262 ] The gcc_aggre1_pnoc_ahb_clk is crucial for the proper MSM8996/APQ8096 functioning. If it gets disabled, several subsytems will stop working (including eMMC/SDCC and USB). There are no in-kernel users of this clock, so it is much simpler to remove from the kernel. The clock was first removed in the commit 9e60de1cf270 ("clk: qcom: Remove gcc_aggre1_pnoc_ahb_clk from msm8996") by Stephen Boyd, but got added back in the commit b567752144e3 ("clk: qcom: Add some missing gcc clks for msm8996") by Rajendra Nayak. Let's remove it again in hope that nobody adds it back. Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Fixes: b567752144e3 ("clk: qcom: Add some missing gcc clks for msm8996") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211104011155.2209654-1-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25clk/ast2600: Fix soc revision for AHBJoel Stanley1-5/+7
[ Upstream commit f45c5b1c27293f834682e89003f88b3512329ab4 ] Move the soc revision parsing to the initial probe, saving the driver from parsing the register multiple times. Use this variable to select the correct divisor table for the AHB clock. Before this fix the A2 would have used the A0 table. Fixes: 2d491066ccd4 ("clk: ast2600: Fix AHB clock divider for A1") Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210922235449.213631-1-joel@jms.id.au Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25clk: ingenic: Fix bugs with divided dividersPaul Cercueil1-3/+3
[ Upstream commit ed84ef1cd7eddf933d4ffce2caa8161d6f947245 ] Two fixes in one: - In the "impose hardware constraints" block, the "logical" divider value (aka. not translated to the hardware) was clamped to fit in the register area, but this totally ignored the fact that the divider value can itself have a fixed divider. - The code that made sure that the divider value returned by the function was a multiple of its own fixed divider could result in a wrong value being calculated, because it was rounded down instead of rounded up. Fixes: 4afe2d1a6ed5 ("clk: ingenic: Allow divider value to be divided") Co-developed-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20211001172033.122329-1-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25clk: at91: sama7g5: remove prescaler part of master clockClaudiu Beznea1-10/+1
[ Upstream commit facb87ad75603813bc3b1314f5a87377f020fcb8 ] On SAMA7G5 the prescaler part of master clock has been implemented as a changeable one. Everytime the prescaler is changed the PMC_SR.MCKRDY bit must be polled. Value 1 for PMC_SR.MCKRDY means the prescaler update is done. Driver polls for this bit until it becomes 1. On SAMA7G5 it has been discovered that in some conditions the PMC_SR.MCKRDY is not rising but the rate it provides it's stable. The workaround is to add a timeout when polling for PMC_SR.MCKRDY. At the moment, for SAMA7G5, the prescaler will be removed from Linux clock tree as all the frequencies for CPU could be obtained from PLL and also there will be less overhead when changing frequency via DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-14-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25clk: imx: imx6ul: Move csi_sel mux to correct base registerStefan Riedmueller1-1/+1
[ Upstream commit 2f9d61869640f732599ec36b984c2b5c46067519 ] The csi_sel mux register is located in the CCM register base and not the CCM_ANALOG register base. So move it to the correct position in code. Otherwise changing the parent of the csi clock can lead to a complete system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely modified. Also remove the SET_RATE_PARENT flag since one possible supply for the csi_sel mux is the system PLL which we don't want to modify. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210927072857.3940880-1-s.riedmueller@phytec.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25clk: sunxi-ng: Unregister clocks/resets when unbindingSamuel Holland23-41/+100
[ Upstream commit 9bec2b9c6134052994115d2d3374e96f2ccb9b9d ] Currently, unbinding a CCU driver unmaps the device's MMIO region, while leaving its clocks/resets and their providers registered. This can cause a page fault later when some clock operation tries to perform MMIO. Fix this by separating the CCU initialization from the memory allocation, and then using a devres callback to unregister the clocks and resets. This also fixes a memory leak of the `struct ccu_reset`, and uses the correct owner (the specific platform driver) for the clocks and resets. Early OF clock providers are never unregistered, and limited error handling is possible, so they are mostly unchanged. The error reporting is made more consistent by moving the message inside of_sunxi_ccu_probe. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210901050526.45673-2-samuel@sholland.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18clk: at91: clk-master: fix prescaler logicClaudiu Beznea1-1/+1
[ Upstream commit 0ef99f8202c5078a72c05af76bfaed2ea4daab19 ] When prescaler value read from register is MASTER_PRES_MAX it means that the input clock will be divided by 3. Fix the code to reflect this. Fixes: 7a110b9107ed8 ("clk: at91: clk-master: re-factor master clock") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-11-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18clk: at91: clk-master: check if div or pres is zeroClaudiu Beznea1-2/+2
[ Upstream commit c2910c00fee4cbb7b222d6e02846adef9ae4135a ] Check if div or pres is zero before using it as argument for ffs(). In case div is zero ffs() will return 0 and thus substracting from zero will lead to invalid values to be setup in registers. Fixes: 7a110b9107ed8 ("clk: at91: clk-master: re-factor master clock") Fixes: 75c88143f3b87 ("clk: at91: clk-master: add master clock support for SAMA7G5") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-9-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULLClaudiu Beznea1-2/+2
[ Upstream commit f12d028b743bb6136da60b17228a1b6162886444 ] Use DIV_ROUND_CLOSEST_ULL() to avoid any inconsistency b/w the rate computed in sam9x60_frac_pll_recalc_rate() and the one computed in sam9x60_frac_pll_compute_mul_frac(). Fixes: 43b1bb4a9b3e1 ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-8-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18clk: at91: check pmc node status before registering syscore opsClément Léger1-0/+5
[ Upstream commit c405f5c15e9f6094f2fa1658e73e56f3058e2122 ] Currently, at91 pmc driver always register the syscore_ops whatever the status of the pmc node that has been found. When set as secure and disabled, the pmc should not be accessed or this will generate abort exceptions. To avoid this, add a check on node availability before registering the syscore operations. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20210913082633.110168-1-clement.leger@bootlin.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Fixes: b3b02eac33ed ("clk: at91: Add sama5d2 suspend/resume") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18clk: mvebu: ap-cpu-clk: Fix a memory leak in error handling pathsChristophe JAILLET1-3/+11
[ Upstream commit af9617b419f77cf0b99702a7b2b0519da0d27715 ] If we exit the for_each_of_cpu_node loop early, the reference on the current node must be decremented, otherwise there is a leak. Fixes: f756e362d938 ("clk: mvebu: add CPU clock driver for Armada 7K/8K") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/545df946044fc1fc05a4217cdf0054be7a79e49e.1619161112.git.christophe.jaillet@wanadoo.fr Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-30Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One fix for the composite clk that broke when we changed this clk type to use the determine_rate instead of round_rate clk op by default. This caused lots of problems on Rockchip SoCs because they heavily use the composite clk code to model the clk tree" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: composite: Also consider .determine_rate for rate + mux composites
2021-10-18clk: composite: Also consider .determine_rate for rate + mux compositesMartin Blumenstingl1-5/+5
Commit 69a00fb3d69706 ("clk: divider: Implement and wire up .determine_rate by default") switches clk_divider_ops to implement .determine_rate by default. This breaks composite clocks with multiple parents because clk-composite.c does not use the special handling for mux + divider combinations anymore (that was restricted to rate clocks which only implement .round_rate, but not .determine_rate). Alex reports: This breaks lot of clocks for Rockchip which intensively uses composites, i.e. those clocks will always stay at the initial parent, which in some cases is the XTAL clock and I strongly guess it is the same for other platforms, which use composite clocks having more than one parent (e.g. mediatek, ti ...) Example (RK3399) clk_sdio is set (initialized) with XTAL (24 MHz) as parent in u-boot. It will always stay at this parent, even if the mmc driver sets a rate of 200 MHz (fails, as the nature of things), which should switch it to any of its possible parent PLLs defined in mux_pll_src_cpll_gpll_npll_ppll_upll_24m_p (see clk-rk3399.c) - which never happens. Restore the original behavior by changing the priority of the conditions inside clk-composite.c. Now the special rate + mux case (with rate_ops having a .round_rate - which is still the case for the default clk_divider_ops) is preferred over rate_ops which have .determine_rate defined (and not further considering the mux). Fixes: 69a00fb3d69706 ("clk: divider: Implement and wire up .determine_rate by default") Reported-by: Alex Bee <knaerzche@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211016105022.303413-2-martin.blumenstingl@googlemail.com Tested-by: Alex Bee <knaerzche@gmail.com> Tested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: add select QCOM_GDSC for SM6350Luca Weiss1-0/+1
QCOM_GDSC is needed for the gcc driver to probe. Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20211007212444.328034-2-luca@z3ntu.xyz Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdscShawn Guo1-1/+1
It looks that the offset 0x7d060 is a copy & paste from above hlos1_vote_turing_mmu_tbu1_gdsc. Correct it to 0x7d07c as per downstream kernel. Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210919022308.24046-1-shawn.guo@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-09-29Merge tag 'renesas-clk-for-v5.15-tag3' of ↵Stephen Boyd2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-fixes Pull Renesas clk driver fixes from Geert Uytterhoeven: - Fix inverted logic in RZ/G2L .is_enabled() function * tag 'renesas-clk-for-v5.15-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: rzg2l: Fix clk status function clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical
2021-09-25clk: socfpga: agilex: fix duplicate s2f_user0_clkDinh Nguyen1-9/+0
Remove the duplicate s2f_user0_clk and the unused s2f_usr0_mux define. Fixes: f817c132db67 ("clk: socfpga: agilex: fix up s2f_user0_clk representation") Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20210916225126.1427700-1-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-09-24clk: renesas: rzg2l: Fix clk status functionBiju Das1-1/+1
As per RZ/G2L HW(Rev.0.50) manual, clock monitor register value 0 means clock is not supplied and 1 means clock is supplied. This patch fixes the issue by removing the inverted logic. Fixing the above, triggered following 2 issues 1) GIC interrupts don't work if we disable IA55_CLK and DMAC_ACLK. Fixed this issue by adding these clocks as critical clocks. 2) DMA is not working, since the DMA driver is not turning on DMAC_PCLK. So will provide a fix in the DMA driver to turn on DMA_PCLK. Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210922112405.26413-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-24clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK criticalBiju Das1-0/+2
Add IA55_CLK and DMAC_ACLK as critical clocks. Previously it worked ok, because of a bug in clock status function and the following patch in this series fixes the original bug. Fixes: c3e67ad6f5a2 ("dt-bindings: clock: r9a07g044-cpg: Update clock/reset definitions") Fixes: eb829e549ba6 ("clk: renesas: r9a07g044: Add DMAC clocks/resets") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210922112405.26413-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-11Merge tag 'clk-for-linus' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One patch to fix an unused variable warning in a Qualcomm clk driver" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc-sm6350: Remove unused variable
2021-09-07Merge tag 'mfd-next-5.15' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Add support for registering devices via MFD cells to Simple MFD (I2C) New Drivers: - Add support for Renesas Synchronization Management Unit (SMU) New Device Support: - Add support for N5010 to Intel M10 BMC - Add support for Cannon Lake to Intel LPSS ACPI - Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family - Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86 New Functionality: - Add support for GPIO to Intel LPC ICH - Add support for Reset to Texas Instruments TPS65086 Fix-ups: - Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86 - Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru - Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq - Pass 'supplied-from' property through axp288_fuel_gauge via swnode - Remove unused file entry; MAINTAINERS - Make interrupt line optional; tps65086 - Rename db8500-cpuidle driver symbol; db8500-prcmu - Remove support for unused hardware; tqmx86 - Provide a standard LPC clock frequency for unknown boards; tqmx86 - Remove unused code; ti_am335x_tscadc - Use of_iomap() instead of ioremap(); syscon Bug Fixes: - Clear GPIO IRQ resource flags when no IRQ is set; tqmx86 - Fix incorrect/misleading frequencies; db8500-prcmu - Mitigate namespace clash with other GPIOBASE users" * tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits) mfd: lpc_sch: Rename GPIOBASE to prevent build error mfd: syscon: Use of_iomap() instead of ioremap() dt-bindings: mfd: Add Broadcom CRU mfd: ti_am335x_tscadc: Delete superfluous error message mfd: tqmx86: Assume 24MHz LPC clock for unknown boards mfd: tqmx86: Add support for TQ-Systems DMI IDs mfd: tqmx86: Add support for TQMx110EB and TQMxE40x mfd: tqmx86: Fix typo in "platform" mfd: tqmx86: Remove incorrect TQMx90UC board ID mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set mfd: simple-mfd-i2c: Add support for registering devices via MFD cells mfd/cpuidle: ux500: Rename driver symbol mfd: tps65086: Add cell entry for reset driver mfd: tps65086: Make interrupt line optional dt-bindings: mfd: Convert tps65086.txt to YAML MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming mfd: db8500-prcmu: Handle missing FW variant mfd: db8500-prcmu: Rename register header mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell mfd: Don't use irq_create_mapping() to resolve a mapping ...
2021-09-03clk: qcom: gcc-sm6350: Remove unused variableKonrad Dybcio1-4/+0
In the commit "clk: qcom: Add SM6350 GCC driver" (no hash yet) an unused variable has been overlooked. Remove it. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/5b7edab0-4756-94d0-d601-050120cbf4cb@somainline.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-09-03Merge tag 'mips_5.15' of ↵Linus Torvalds3-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - converted Pistachio platform to use MIPS generic kernel - fixes and cleanups * tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits) MIPS: Malta: fix alignment of the devicetree buffer MIPS: ingenic: Unconditionally enable clock of CPU #0 MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports MIPS: mscc: ocelot: disable all switch ports by default MAINTAINERS: adjust PISTACHIO SOC SUPPORT after its retirement MIPS: Return true/false (not 1/0) from bool functions MIPS: generic: Return true/false (not 1/0) from bool functions MIPS: Make a alias for pistachio_defconfig MIPS: Retire MACH_PISTACHIO MIPS: config: generic: Add config for Marduk board pinctrl: pistachio: Make it as an option phy: pistachio-usb: Depend on MIPS || COMPILE_TEST clocksource/drivers/pistachio: Make it selectable for MIPS clk: pistachio: Make it selectable for generic MIPS kernel MIPS: DTS: Pistachio add missing cpc and cdmm MIPS: generic: Allow generating FIT image for Marduk board MIPS: locking/atomic: Fix atomic{_64,}_sub_if_positive MIPS: loongson2ef: don't build serial.o unconditionally MIPS: Replace deprecated CPU-hotplug functions. MIPS: Alchemy: Fix spelling contraction "cant" -> "can't" ...
2021-09-03Merge tag 'clk-for-linus' of ↵Linus Torvalds88-577/+18204
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Nothing changed in the clk framework core this time around. We did get some updates to the basic clk types to use determine_rate for the divider type and add a power of two fractional divider flag though. Otherwise, this is a collection of clk driver updates. More than half the diffstat is in the Qualcomm clk driver where we add a bunch of data to describe clks on various SoCs and fix bugs. The other big new thing in here is the Mediatek MT8192 clk driver. That's been under review for a while and it's nice to see that it's finally upstream. Beyond that it's the usual set of minor fixes and tweaks to clk drivers. There are some non-clk driver bits in here which have all been acked by the respective maintainers. New Drivers: - Support video, gpu, display clks on qcom sc7280 SoCs - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs - Multimedia clks (MMCC) on qcom MSM8994/MSM8992 - RPMh clks on qcom SM6350 SoCs - Support for Mediatek MT8192 SoCs - Add display (DU and DSI) clocks on Renesas R-Car V3U - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and resets on Renesas RZ/G2L Updates: - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators - Add power of two flag to fractional divider clk type - Migrate some clk drivers to clk_divider_ops.determine_rate - Migrate to clk_parent_data in gcc-sdm660 - Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2 - Switch from .round_rate to .determine_rate in clk-divider-gate - Fix clock tree update for TF-A controlled clocks for all i.MX8M - Add missing M7 core clock for i.MX8MN - YAML conversion of rk3399 clock controller binding - Removal of GRF dependency for the rk3328/rk3036 pll types - Drop CLK_IS_CRITICAL flag from Tegra fuse clk - Make CLK_R9A06G032 Kconfig symbol invisible - Convert various DT bindings to YAML" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits) dt-bindings: clock: samsung: fix header path in example clk: tegra: fix old-style declaration clk: qcom: Add SM6350 GCC driver MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema dt-bindings: clock: samsung: convert Exynos AudSS to dtschema dt-bindings: clock: samsung: convert Exynos4 to dtschema dt-bindings: clock: samsung: convert Exynos3250 to dtschema dt-bindings: clock: samsung: convert Exynos542x to dtschema dt-bindings: clock: samsung: add bindings for Exynos external clock dt-bindings: clock: samsung: convert Exynos5250 to dtschema clk: vc5: Add properties for configuring SD/OE behavior clk: vc5: Use dev_err_probe dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin dt-bindings: clock: brcm,iproc-clocks: fix armpll properties clk: zynqmp: Fix kernel-doc format clk: at91: clk-generated: Limit the requested rate to our range clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates clk: zynqmp: Fix a memory leak clk: zynqmp: Check the return type ...
2021-09-02Merge branches 'clk-kirkwood', 'clk-imx', 'clk-doc', 'clk-zynq' and ↵Stephen Boyd13-42/+56
'clk-ralink' into clk-next * clk-kirkwood: clk: kirkwood: Fix a clocking boot regression * clk-imx: clk: imx8mn: Add M7 core clock clk: imx8m: fix clock tree update of TF-A managed clocks clk: imx: clk-divider-gate: Switch to clk_divider.determine_rate clk: imx8mn: use correct mux type for clkout path clk: imx8mm: use correct mux type for clkout path * clk-doc: dt-bindings: clock: samsung: fix header path in example MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema dt-bindings: clock: samsung: convert Exynos AudSS to dtschema dt-bindings: clock: samsung: convert Exynos4 to dtschema dt-bindings: clock: samsung: convert Exynos3250 to dtschema dt-bindings: clock: samsung: convert Exynos542x to dtschema dt-bindings: clock: samsung: add bindings for Exynos external clock dt-bindings: clock: samsung: convert Exynos5250 to dtschema dt-bindings: clock: brcm,iproc-clocks: fix armpll properties clk: zynqmp: Fix kernel-doc format clk: at91: sama7g5: remove all kernel-doc & kernel-doc warnings clk: zynqmp: fix kernel doc * clk-zynq: clk: zynqmp: Fix a memory leak clk: zynqmp: Check the return type * clk-ralink: clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
2021-09-02Merge branches 'clk-nvidia', 'clk-rockchip', 'clk-at91' and 'clk-vc5' into ↵Stephen Boyd7-18/+46
clk-next - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators * clk-nvidia: clk: tegra: fix old-style declaration clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> * clk-rockchip: clk: rockchip: make rk3308 ddrphy4x clock critical clk: rockchip: drop GRF dependency for rk3328/rk3036 pll types dt-bindings: clk: Convert rockchip,rk3399-cru to DT schema clk: rockchip: Add support for hclk_sfc on rk3036 clk: rockchip: rk3036: fix up the sclk_sfc parent error clk: rockchip: add dt-binding clkid for hclk_sfc on rk3036 * clk-at91: clk: at91: clk-generated: Limit the requested rate to our range * clk-vc5: clk: vc5: Add properties for configuring SD/OE behavior clk: vc5: Use dev_err_probe dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
2021-09-02Merge branch 'clk-frac-divider' into clk-nextStephen Boyd4-23/+66
- Add power of two flag to fractional divider clk type * clk-frac-divider: clk: fractional-divider: Document the arithmetics used behind the code clk: fractional-divider: Introduce POWER_OF_TWO_PS flag clk: fractional-divider: Hide clk_fractional_divider_ops from wide audience clk: fractional-divider: Export approximation algorithm to the CCF users
2021-09-02Merge branches 'clk-renesas', 'clk-cleanup' and 'clk-determine-divider' into ↵Stephen Boyd16-55/+126
clk-next - Migrate some clk drivers to clk_divider_ops.determine_rate * clk-renesas: clk: renesas: Make CLK_R9A06G032 invisible clk: renesas: r9a07g044: Add entry for fixed clock P0_DIV2 dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock clk: renesas: r9a07g044: Add clock and reset entries for ADC clk: renesas: r9a07g044: Add clock and reset entries for CANFD clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch] clk: renesas: r9a07g044: Add GPIO clock and reset entries clk: renesas: r9a07g044: Add SSIF-2 clock and reset entries clk: renesas: r9a07g044: Add USB clocks/resets clk: renesas: r9a07g044: Add DMAC clocks/resets clk: renesas: r9a07g044: Add I2C clocks/resets clk: renesas: r8a779a0: Add the DSI clocks clk: renesas: r8a779a0: Add the DU clock clk: renesas: rzg2: Rename i2c-dvfs to iic-pmic clk: renesas: rzg2l: Fix off-by-one check in rzg2l_cpg_clk_src_twocell_get() clk: renesas: rzg2l: Avoid mixing error pointers and NULL clk: renesas: rzg2l: Fix a double free on error clk: renesas: rzg2l: Fix return value and unused assignment clk: renesas: rzg2l: Remove unneeded semicolon * clk-cleanup: clk: palmas: Add a missing SPDX license header clk: Align provider-specific CLK_* bit definitions * clk-determine-divider: clk: stm32mp1: Switch to clk_divider.determine_rate clk: stm32h7: Switch to clk_divider.determine_rate clk: stm32f4: Switch to clk_divider.determine_rate clk: bcm2835: Switch to clk_divider.determine_rate clk: divider: Implement and wire up .determine_rate by default
2021-09-02Merge branches 'clk-qcom', 'clk-socfpga', 'clk-mediatek', 'clk-lmk' and ↵Stephen Boyd48-439/+17910
'clk-x86' into clk-next - Support video, gpu, display clks on qcom sc7280 SoCs - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs - Multimedia clks (MMCC) on qcom MSM8994/MSM8992 - Migrate to clk_parent_data in gcc-sdm660 - RPMh clks on qcom SM6350 SoCs - Support for Mediatek MT8192 SoCs * clk-qcom: (38 commits) clk: qcom: Add SM6350 GCC driver dt-bindings: clock: Add SM6350 GCC clock bindings clk: qcom: rpmh: Add support for RPMH clocks on SM6350 dt-bindings: clock: Add RPMHCC bindings for SM6350 clk: qcom: adjust selects for SM_VIDEOCC_8150 and SM_VIDEOCC_8250 clk: qcom: Add Global Clock controller (GCC) driver for SM6115 dt-bindings: clk: qcom: gcc-sm6115: Document SM6115 GCC clk: qcom: mmcc-msm8994: Add MSM8992 support clk: qcom: Add msm8994 MMCC driver dt-bindings: clock: Add support for MSM8992/4 MMCC clk: qcom: Add Global Clock Controller driver for MSM8953 dt-bindings: clock: add Qualcomm MSM8953 GCC driver bindings clk: qcom: gcc-sdm660: Replace usage of parent_names clk: qcom: gcc-sdm660: Move parent tables after PLLs clk: qcom: use devm_pm_runtime_enable and devm_pm_clk_create PM: runtime: add devm_pm_clk_create helper PM: runtime: add devm_pm_runtime_enable helper clk: qcom: a53-pll: Add MSM8939 a53pll support dt-bindings: clock: Update qcom,a53pll bindings for MSM8939 support clk: qcom: a53pll/mux: Use unique clock name ... * clk-socfpga: clk: socfpga: agilex: add the bypass register for s2f_usr0 clock clk: socfpga: agilex: fix up s2f_user0_clk representation clk: socfpga: agilex: fix the parents of the psi_ref_clk * clk-mediatek: (22 commits) clk: mediatek: make COMMON_CLK_MT8167* depend on COMMON_CLK_MT8167 clk: mediatek: Add MT8192 vencsys clock support clk: mediatek: Add MT8192 vdecsys clock support clk: mediatek: Add MT8192 scp adsp clock support clk: mediatek: Add MT8192 msdc clock support clk: mediatek: Add MT8192 mmsys clock support clk: mediatek: Add MT8192 mfgcfg clock support clk: mediatek: Add MT8192 mdpsys clock support clk: mediatek: Add MT8192 ipesys clock support clk: mediatek: Add MT8192 imp i2c wrapper clock support clk: mediatek: Add MT8192 imgsys clock support clk: mediatek: Add MT8192 camsys clock support clk: mediatek: Add MT8192 audio clock support clk: mediatek: Add MT8192 basic clocks support clk: mediatek: Add mtk_clk_simple_probe() to simplify clock providers clk: mediatek: Add configurable enable control to mtk_pll_data clk: mediatek: Fix asymmetrical PLL enable and disable control clk: mediatek: Get regmap without syscon compatible check clk: mediatek: Add dt-bindings of MT8192 clocks dt-bindings: ARM: Mediatek: Add audsys document binding for MT8192 ... * clk-lmk: clk: lmk04832: drop redundant fallthrough statements * clk-x86: clk: x86: Rename clk-lpt to more specific clk-lpss-atom
2021-08-29Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One hotfix for a NULL pointer deref in the Renesas usb clk driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereference
2021-08-29clk: tegra: fix old-style declarationArnd Bergmann1-1/+1
With extra warnings enabled, gcc complains about a slightly odd prototype: drivers/clk/tegra/clk-dfll.c:1380:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] 1380 | static void inline dfll_debug_init(struct tegra_dfll *td) { } Move the 'inline' keyword to the start of the line. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210322215047.1062540-1-arnd@kernel.org Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-29clk: qcom: Add SM6350 GCC driverKonrad Dybcio3-0/+2596
This adds Global Clock controller (GCC) driver for SM6350 SoC Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210820203624.232268-3-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-29clk: vc5: Add properties for configuring SD/OE behaviorSean Anderson1-0/+24
The SD/OE pin may be configured to enable output when high or low, and to shutdown the device when high. This behavior is controller by the SH and SP bits of the Primary Source and Shutdown Register (and to a lesser extent the OS and OE bits). By default, both bits are 0 (unless set by OTP memory), but they may need to be configured differently, depending on the external circuitry controlling the SD/OE pin. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20210809223813.3766204-3-sean.anderson@seco.com Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-05 20:43:42 +0300